Related
What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app
I currently have the Feather and love how it keeps the phone's slim profile while staying Rigid. From what I've read these cases seem to be similar, with the Feather not covering the top and the bottom, and the Surface being a two piece that snaps together. Does anyone own both of these cases and/or knows if the Surface is either thicker or the same thickness of the Feather?
I've tried the Ringke(best silicone case I've seen) and the ruggedized Moto battery cover and they helped me remember why I don't like soft cases...mainly because of the lip moving around when you take it out of your pocket every one in awhile. I also have a TPU case and that is probably the best soft case.
I have both cases. I went with the Seido case for day to day use.
Yes the Seido case adds some bulk over the Incipio, but I thought the trade off was worth it.
Both have the rubberized feel for extra grip, but without the super extra grip of the silicone or full rubber cases. The Seido slide on/off design means not have to "snap" or "pry" the case off when I need to get to the SD Card or Battery. The Incipio feather created "edges" which I just didn't like the feel of at the top and bottom of the phone.
I agree ^ I also have both, and even though the surface does add a little bit more bulk/ thickness, it does provide more coverage therefore protection. And just an fyi, the surface doesn't fit any dock I've tried it in even with the case insert removed... Which does suck, but its very easy to take off once you get used to it.
Sent from my MB860
Seidio all the way man. I dropped my phone once and it got scratched on the sides where the Incipio wasn't protecting. what's the point of even having a case if it barely protects it?
kshiuan said:
Seidio all the way man. I dropped my phone once and it got scratched on the sides where the Incipio wasn't protecting. what's the point of even having a case if it barely protects it?
Click to expand...
Click to collapse
A lot of people, myself included, don't look for a case to protect the phone against impact, but simply to protect it from the day to day wear and tear of pulling it in and out of pockets or getting scratched by keys or some loose change.
-Doogs™
Do any of you use the Surface with the holster? Right now, I am leaning towards that instead of the Otterbox, but I'd like to know that the holster holds the phone securely before I spend the $50.00.
Thanks in advance.
beazie0885 said:
I agree ^ I also have both, and even though the surface does add a little bit more bulk/ thickness, it does provide more coverage therefore protection. And just an fyi, the surface doesn't fit any dock I've tried it in even with the case insert removed... Which does suck, but its very easy to take off once you get used to it.
Sent from my MB860
Click to expand...
Click to collapse
My surface fits the lapdock with fit plate removed just fine.
kshiuan said:
Seidio all the way man. I dropped my phone once and it got scratched on the sides where the Incipio wasn't protecting. what's the point of even having a case if it barely protects it?
Click to expand...
Click to collapse
considering the only part of the phone that the feather doesn't cover is the flimsy cheap plastic battery cover, i don't see the problem. i got the feather to protect the metal sides, which it does.
seidio makes great cases but it's just too bulky for my liking.
Thanks guys for the reviews and comparisons. I was on the verge of picking up the Seidio Surface, but after the news of the leaked HTC Holiday specs, I think I am going to curb my spending on any future Atrix accessories.
dLo GSR said:
considering the only part of the phone that the feather doesn't cover is the flimsy cheap plastic battery cover, i don't see the problem. i got the feather to protect the metal sides, which it does.
seidio makes great cases but it's just too bulky for my liking.
Click to expand...
Click to collapse
IMHO it also doesn't protect the border of the front of the screen on the top and bottom. That is where I got it scratched...
Sent from my Gladiatrix
Got the Surface
soxfan37 said:
Do any of you use the Surface with the holster? Right now, I am leaning towards that instead of the Otterbox, but I'd like to know that the holster holds the phone securely before I spend the $50.00.
Thanks in advance.
Click to expand...
Click to collapse
Hey buddy, just answering your question, I own both Surface and Active from Siedo and both of them are just amazing. For daily use Active is the option and fix perfect in the hd dock once you remove the main base cover of it and for the Surface, very slim and fancy. Both holsters hold the device extremelly well!
Hope it help, greetings!
I like my phone to be protected really well.....Have a look
1. Official Samsung Flip Case
2. Cheap S-Curve TPU case from eBay --> I bought this extra CHEAP case so I can experiment and cut it to fit the Flip Case. It's not the best cutting job, but it will do the job for now
3. Home made Phone Sock
I guess I will use this set up until the flip case dies, by then I will start using the Nillkin TPU Case.
ps. I really like the Nillkin ones...they are thin and fits the GNote really well
Great job. I'm still waiting for my TPU case to arrive so I can try this. Instead of the sock, I'll try a tiny short strip of velcro to keep the flip shot.
DMax99 said:
I like my phone to be protected really well.....Have a look
1. Official Samsung Flip Case
2. Cheap S-Curve TPU case from eBay --> I bought this extra CHEAP case so I can experiment and cut it to fit the Flip Case. It's not the best cutting job, but it will do the job for now
3. Home made Phone Sock
I guess I will use this set up until the flip case dies, by then I will start using the Nillkin TPU Case.
ps. I really like the Nillkin ones...they are thin and fits the GNote really well
Click to expand...
Click to collapse
You beat me to it lol.
I was thinking about doing this, for the exact same reason as yourself. Just a quick question, does the cover fold all the way back like it would without the TPU case installed?
RavenY2K3 said:
You beat me to it lol.
I was thinking about doing this, for the exact same reason as yourself. Just a quick question, does the cover fold all the way back like it would without the TPU case installed?
Click to expand...
Click to collapse
yeah, it does. the cover can bend all the way down to the edge of the tpu cover.
just did something similar. cut side off the tpu gel case, stretched the gel case to fit the slightly thicker flip case back cover.
it works, but the tpu case loses some of its rigidity when you cut it, it wont stick as well to the phone.
Souai said:
just did something similar. cut side off the tpu gel case, stretched the gel case to fit the slightly thicker flip case back cover.
it works, but the tpu case loses some of its rigidity when you cut it, it wont stick as well to the phone.
Click to expand...
Click to collapse
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
tamarian said:
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
Click to expand...
Click to collapse
doing it that way would then cause the the flip cover to lose some durability.
by cutting the tpu case to fit the flip case as is, you still leave 1.5cm of gel case around the corners, which is enough for the phone to hold the case on. the only point of weakness lies in the flip case making the phone's rear thicker. by cutting one side of the tpu case and having to wrap it around a thicker phone will kinda distort the tpu case a little.
its not enough to make it fall off that easily, at least not now. but its not as rigid compared to tpu case uncut and i'd expect it to become a little loose with wear and tear.
Yo, sup dawg, I herd you like cases, so I put a case in your case so you can put another case while you using a case in a case.
tamarian said:
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
Click to expand...
Click to collapse
hehe...this is actually a good idea too...
victorlht88 said:
This is honestly quite retarded..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
you do realize that a lot of cases out there are cases in cases, right?
For example OtterBox
DMax99 said:
you do realize that a lot of cases out there are cases in cases, right?
For example OtterBox
Click to expand...
Click to collapse
lol, for my motorola atrix, i had the ballistic hardcore case. you get the core plastic+tpu case with screen protector integrated, and then a silicone skin that can fit on the outside, and then a beltclip/screen guard. when you run the inner case and silicone skin together, the device is water-resistant.
but honestly, i dont see why people think what we're doing is silly.
the flip cover is good for protecting the screen, but doesnt protect the corners. protecting the corners is important because statistically, if you were to drop your phone, its 90+% more likely to land on a corner first than flat on its face. the vibrations of the drop are then going to transfer into the device's internals, which can do a bit of damage, hence you need protection for the corners.
the tpu case is good for protecting the device itself but offers no real protection from the screen aside from preventing it from getting damaged if it were to land flat face down. if your screen were to land on a corner of a table, you'd be screwed.
by combining the cases, you get the best of both worlds protection wise.
Souai said:
lol, for my motorola atrix, i had the ballistic hardcore case. you get the core plastic+tpu case with screen protector integrated, and then a silicone skin that can fit on the outside, and then a beltclip/screen guard. when you run the inner case and silicone skin together, the device is water-resistant.
but honestly, i dont see why people think what we're doing is silly.
the flip cover is good for protecting the screen, but doesnt protect the corners. protecting the corners is important because statistically, if you were to drop your phone, its 90+% more likely to land on a corner first than flat on its face. the vibrations of the drop are then going to transfer into the device's internals, which can do a bit of damage, hence you need protection for the corners.
the tpu case is good for protecting the device itself but offers no real protection from the screen aside from preventing it from getting damaged if it were to land flat face down. if your screen were to land on a corner of a table, you'd be screwed.
by combining the cases, you get the best of both worlds protection wise.
Click to expand...
Click to collapse
maybe because they are not poor like me
Souai said:
but honestly, i dont see why people think what we're doing is silly.
Click to expand...
Click to collapse
I'm with you on this, Considering I paid more for this phone than I paid for my Galaxy Tab 10.1 3G (coz I couldn't wait for it to be officially released lol) I'm gonna protect the hell out of this thing.
RavenY2K3 said:
I'm with you on this, Considering I paid more for this phone than I paid for my Galaxy Tab 10.1 3G (coz I couldn't wait for it to be officially released lol) I'm gonna protect the hell out of this thing.
Click to expand...
Click to collapse
i agree there.
about 6 months ago i bought my motorola atrix for $500. to me, spending $40 on a ballistic hardcore case is cheap insurance for a $500 phone.
and a few weeks ago i spent $800 on my galaxy note (now some places are selling it for $600), to me, $30 is cheap insurance to ensure it continues running well. although i would prefer another ballistic hardcore case, i dont think ballistic have any plans for the note.
Souai said:
i agree there.
about 6 months ago i bought my motorola atrix for $500. to me, spending $40 on a ballistic hardcore case is cheap insurance for a $500 phone.
and a few weeks ago i spent $800 on my galaxy note (now some places are selling it for $600), to me, $30 is cheap insurance to ensure it continues running well. although i would prefer another ballistic hardcore case, i dont think ballistic have any plans for the note.
Click to expand...
Click to collapse
yeah...there aren't that many good Case Company that have plans for our Note
I wish casemate would make a tough case for the note. I loved them for my gs and gs II. They had a thin flexible silicone sleeve that went around the phone then a hard outer shell that went around the silicone.
great freaking case.
I should be updating this post to Quadruple Protection...because I have just put the Skinomi Carbon Fibre Skin on it this Friday.
and I must say the skinomi skin is Great!
one particular advantage about the way i have it set up...
the friction of the tpu gel case means it doesnt slide, meaning i can use the flip cover as a stand.
Souai said:
one particular advantage about the way i have it set up...
the friction of the tpu gel case means it doesnt slide, meaning i can use the flip cover as a stand.
Click to expand...
Click to collapse
Nice....Is that the S-Curve TPU?
Do you find the unlock button hard to press?
http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=140637892999&ssPageName=ADME:L:OC:AU:1123
the case i bought was this one.
it is slightly harder to press the power button, but thats mainly because of the way im using the case. the phone is slightly thicker when you use the samsung flip cover, so the gel case has to be stretched a little. on the case, theres a slightly softer rubber/plastic gap for the power button which works well normally, but since the case is stretched a little, it is slightly off center for the power button. not enough to cause problems, but enough to notice a bit of a difference.
but overall, i'd say it works well. gel case + screen protector + flip cover = ready to take this thing when i go paintballing!
I currently have the ballistic SG case and was wondering if you guys would recommend any other cases out there?
Sent from my SGH-T989 using Tapatalk 2
I have a balastic case with fly grip. Awesome!
Simple TPU case (black) from eBay works for me.
I am using the CIMO S-Line TPU Case. It looks nice and it protects my phone.
Sent from my SGH-T989 using xda premium
I would say the D30 cases from t mobile. Bought one of amazon for $10, Fits like a glove and protects pretty good.
http://www.amazon.com/T-Mobile-Slee...=UTF8&qid=1349363353&sr=8-3&keywords=D30+t989
I'm currently switching between the white body glove case from T-Mobile and the PDair leather case. I really like the leather case cause it protects my screen.
dia_naji said:
I would say the D30 cases from t mobile. Bought one of amazon for $10, Fits like a glove and protects pretty good.
http://www.amazon.com/T-Mobile-Slee...=UTF8&qid=1349363353&sr=8-3&keywords=D30+t989
Click to expand...
Click to collapse
D3o cases are junk. Especially the ones with the softish plastic backing. The all black one piece is alright,but still junk.
The ones with the colored plastic backing are prone to cracking just be taking off the case. Big no-no since I wash my case periodically.
On top of that, the 3.5mm slot is too small. Only slim jacks fit while the d3o case is on. I'm not willing to change my Sennheisers just because design flaws of the case.
Don't forget how much force it takes to push the power button. Over time,this can damage the power button by recessing it in. I switched to the white body glove. Its properly designed and does what I need it do.
ralphie1267 said:
I have a balastic case with fly grip. Awesome!
Click to expand...
Click to collapse
i have a case similar to this, one of the amazon variants.
any who i really like the design, especially the thick corners which is what many times takes the impact of the drop. i have not had problems with screen bubbling up either
I purchased the white body glove case from tmobile store and its doing the job. I've dropped the phones a couple of times already, and its still doesnt show any scratches unless your eyeball is touching the case.
I got one from moster accessory website called the black transfusion hard cover case an I really like it as my second case. My first case was the D30, but the transfusion case was more cheaper than the d30.
http://www.amazon.com/Diztronic-Fle...349490267&sr=8-1&keywords=diztronic+galaxy+s2
I tried 3 cases, this is the best
Because I use a holster, went with the Seidio Active.
bhowanidin said:
Because I use a holster, went with the Seidio Active.
Click to expand...
Click to collapse
I came upon an older Targus holster for Palm PDAs back from 2000. Its got that old brown leather look with a velcro snap and velour interior padding. Enough room for my Herc wrapped in its TPU.
Xeroday said:
http://www.amazon.com/Diztronic-Fle...349490267&sr=8-1&keywords=diztronic+galaxy+s2
I tried 3 cases, this is the best
Click to expand...
Click to collapse
+1
Sent from my SGH-T989 using xda premium
Hello, guys
I'm looking for a good case for my GS2 i9100...
It has to be: dual layer protection...
I found those two: Otterbox commuter series, and Mate-case tough.
Which one is the best? Or, are there other good cases on the market?
And if you got one, what are your experiences?
I have the Trident Aegis case and I really recommend it. I looked at the Otterbox Commuter but the back was slicker than what I wanted because I tend to have things fall out of my pockets and I didn't want my phone to be one of them. The Trident Aegis has a silicone underlayer that reveals itself at the bulked up corners and bevel, and has headphone and charging jack cover flaps to keep dust out. It's top layer is hard plastic but it has almost a soft, smooth texture to it that doesn't slide around as much. I've dropped this phone at least 10 times already and it's completely unscathed. Definitely check it out.
stastos said:
I have the Trident Aegis case and I really recommend it. I looked at the Otterbox Commuter but the back was slicker than what I wanted because I tend to have things fall out of my pockets and I didn't want my phone to be one of them. The Trident Aegis has a silicone underlayer that reveals itself at the bulked up corners and bevel, and has headphone and charging jack cover flaps to keep dust out. It's top layer is hard plastic but it has almost a soft, smooth texture to it that doesn't slide around as much. I've dropped this phone at least 10 times already and it's completely unscathed. Definitely check it out.
Click to expand...
Click to collapse
Thnx, I will check those out
stastos said:
I have the Trident Aegis case and I really recommend it. I looked at the Otterbox Commuter but the back was slicker than what I wanted because I tend to have things fall out of my pockets and I didn't want my phone to be one of them. The Trident Aegis has a silicone underlayer that reveals itself at the bulked up corners and bevel, and has headphone and charging jack cover flaps to keep dust out. It's top layer is hard plastic but it has almost a soft, smooth texture to it that doesn't slide around as much. I've dropped this phone at least 10 times already and it's completely unscathed. Definitely check it out.
Click to expand...
Click to collapse
I looked at it, it seems give good protection to your phone, fit nicely, but it looks a little too bulky for me..
In my opinion Trident has the most protective cases while otter box may be more practical if you don't need the extra level of safety
Sent from my GT-I9100 using xda premium
freshlycutlawn said:
In my opinion Trident has the most protective cases while otter box may be more practical if you don't need the extra level of safety
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you,
I was looking for a cover where my phone was protected, the cover had to be good protection, but also a little stylish, not to bulky.
I also think trident and ballistic has the best protection, but I dont like the look so much...
So I made my decision and ordered a mate-case tough...
But I also need a good screen protection (but not too expensive), because I put my phone always in my pocket, sometimes with keys...
I always had a flipcover, that gives also protection for my screen... But I bought also the Exomount 2: universal car mount, which is an awesome mount, I'm very happy with that...
However with a mount, you can't use a flipcover, because you have to flip the cover to the back... So It wont fit nicely... (I hope you understand what i'm trying to say).
So I had to make a decision... A flipcover so I would protect my screen of scratches of my keys (but difficult to use in the car mount) OR a dual layer protected cover without a flipcover + screen protector... (and easy to use in the car mount)
So I want to use the cover anytime and everywhere... (I'm not planning for changing covers for each event), so it had to be a little stylish and not too bulky...
I hope that I made the right decision...