Develop Bugs

[DIY ROM] B5x Based Rom Add what you want

I take no responsibility for any damge caused.
You will make customize this rom yourself by following these isntructions:
Step 1
Firstly Download the necessary files:
B132*= http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/
B510*= https://drive.google.com/?usp=chrome_app#folders/0ByjEFdm-4A3EQlZuejlla2xaUTQ
Stock Recovery*= http://www.androidfilehost.com/?fid=23252070760973625
TWRP Recovery^= http://www.androidfilehost.com/?fid=23329332407572611
Adb Drivers*= http://adbdriver.com/upload/AdbDriverInstaller.exe
Pure Graphic HD Mod^= http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_(Rendering+Version).zip
Pure Performances Stock^= http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances™X_Stock.1.4.zip
Pure Audio^= http://d-h.st/32h
Bravia Engine^= http://www.dropbox.com/s/l1m3q18g64yb0av/Sonyengines4.0+.zip
Minimal ADB and Fastboot ^= https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
^ is optional and * is a must
Step 2 Method A
Now the steps will be different depending on what rom you currently have installed if you have a custom or beta firmware/rom installed and twrp you will need to:
Firstly Flash Your Recovery to Stock = http://forum.xda-developers.com/showthread.php?t=2636231
Flash B132= Extract the B132 file and copy it's dload folder onto your internal memory>then reboot your phone into recovery by>holding pwr+vol up+ vol down continuously untill it starts recovery>after it finishes setup your phone then follow the next step
Flash B510 =(do not flash with recovery) do so by taking the zip file as is(do not extract) and copying it onto your P6's internal memory under the dload folder(if it's not there create it) then on your P6's goto settings>about phone>system update>local>update then let it update.When it's done you have successfully installed Kitkat, if you want go on to (optional further steps)
Flash TWRP = http://forum.xda-developers.com/showthread.php?t=2636231 then
Install the mods =Reboot to Recovery>hold pwr+vol up+ vol down continuously untill it starts> Start with Pure graphics>Pure Performance>Pure audio>Bravia>then clear cache> Reboot > And You are done you have a optimized B510 rom
Or if you are already on a stock rom like B111 or so then you can just:
skip the 1 instruction on the list and just do the rest.
[Note]
You can replace B510 with B512,B513 if you wanted to.
B512 = http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B512.zip
B513 = http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B513.zip
Method B
1. Start with Paranoid Android, OMNI or any other AOSP-based ROM.
2. Back up all data with Titanium backup and copy everything you need from your internal storage. ATTENTION: The internal storage will be wiped while flashing, so the backup MUST be on your SD-Card.
3. Copy dload folder to SD-Card or internal storage. (there should be no difference)
4. Boot to TWRP and make a backup in-case something goes wrong.
5. In TWRP wipe everything except internal and external storage.
6. In TWRP choose reboot to bootloader. Confirm that no OS is installed and don't install SuperSU.
7. Plug your phone in your PC and open a CMD.
8. Download B510 recovery.img and boot.img from this thread http://forum.xda-developers.com/show...php?p=51718316.
9. Follow the instructions by @surdu_petru(method1)
(or use this(method 2)choose install recovery image first, then the boot image
or use Method 3>
copy both the recovery and boot img files to your adb folder then>
run these commands:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot recovery
. IMPORTANT: When the flashing is finished and the phone reboots unplug the USB cable then wait for recovery to open and let it install.
10. You are finished!! The first boot takes some time no need to panic.
Additional:
Reinstall TWRP and flash SuperSU for Root. Than you can restore your backup you made in the second step.
[credit for discovering it's possible to install B510 directly from Aosp based roms goes to @taaeem= original post]
Rooting:
Try these:
XDA Root List = http://forum.xda-developers.com/showthread.php?t=2390491
Motochopper = http://www.hexamob.com/downloads/motochopper.zip
Doomlord's Exploit = http://forum.xda-developers.com/showthread.php?t=1321582
Bin4ry Method= http://www.schwantz-i.org/universal/Root_with_Restore_by_Bin4ry_v18.rar
SuperSu Flashing method = http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip?retrieve_file=1
Essential Apps
Titanium Backup
Wifi Analyzer
Chrome
Gmail
BBM
Whatsapp
Facebook
Messenger
Calculator++
Cpu-Z
AnTuTu Benchmark
Speedtest
Lucky Patcher
ES File Explorer
AndroZip
Root Browser
Adobe Reader
Vlc
Battery Doctor
Clean Master
Unit Converter
Software Data Cable
My Phone Explorer
Fing
Ad Away
For users struggling with bootloader and recovery issues try using this to switch to stock recovery http://www.androidfilehost.com/?fid=23501681358539086
Also for help with common problems goto http://forum.xda-developers.com/ascend-p6/help/p6-u06-common-issues-fixes-t2843810
credits for creating the mods,twrp,apps,root methods goto their respective developers.

Maybe i got you wrong, but is it possible that i share the ROM with others? Or do you mean that the DIY ROM is only for ourself?
PS: The link for Pure Graphic HD Mod does not work, theres is a typo. The right URL is
"http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_%28Rendering+Version%29.zip"

Tried the pure audio and the pure performance mods... Audio is better...but performance not so good! Anyway...good job!! ?

Can I flash that superuser 2.02 because mine when I click its unfortunately stop im on b513 repack by surdu
Sent from my HUAWEI P6-U06 using xda premium

You can give it a try.

Idol tools Suite for 4.7 [6039] version 21-11-2016

Hi!
I update the Idol suite for 4.7 6039 phone version, it is a Windows tools ( sorry).
Log:
It use ADB tools
Can unlock bootloader
Flash TWRP 3.0.0-0 for Idol 4.7
Backup yur phone ROM (need root)
Can boot in bootloader mode
Can reboot from bootloader mode
Can boot in to recovery
Can simply reboot the phone
Can extract the files from a ext4 image, like system.img
Can flash a single image
Can pull to edite the build.prop file and create a flash zip for it
Can boot in to twrp 3.0.0-0 with out flashing ( useful to recover the phone)
Can pull the apks from system and create a flash zip ( If you want to change something in apps or change a pp for another than you want to flash it again )
Can edite the apk files and create a flash zip
Can create a new Splash image and a zip to flash it
It have idol drivers for windows
NOTE:
Some tools are not mine, I simply put everything together in one place!​
I am not responsible for any damage they may cause to your device.
Use it at your responsability​
Extract the folder from zip in to descktop and execute the Idol_Suite_V3.exe file.
​
New_Idol_4.7_Suite.zip
Any issue please tell me!
Enjoy it!

The tool is update:
Now you can modify boot and recovery to.

thank you dude.

You can upload the file again

Thanks!!!

Hi Persona78, first can i say what a fantastic job you have done, most of my research on the idol 3 4.7 points back to you, hats off sir!
I'm still having a problem and i'm really at a loss here after about a week of no returns.
adb refuses to recognise my 6039y when in bootloader so i cannot flash recovery, or ROM, or any command. I have all drivers installed correctly, vendor id of 0x1bbb is set in a.ini file in adb_usb.ini, i keep search for different approaches but turning up nothing!
Are there anything to suggest? I would be most appreciative!
Thanks, Marlin

[HELP] I need a copy of the cust folder from the root of the device

Hello guys,
I have a lot of problems with my cust partition and as moving the files from the cust partition to another phone works, I need the files of the cust partition from someone on any global MIUI 9 based on android 8.1.0 (REDMI NOTE 5 PRO / 5 GLOBAL)
Please upload it to something and share it
It will save my device and fix the problems
Guide:
1. Boot to twrp
2. go to the file explorer of twrp
3. go to the root of the device
4. go to the cust folder and copy everything from there to your internal storage and move it to your PC via MTP
5. add the files to a zip file and upload it
Thanks and have a good day!

Just flash cust.img via fastboot. You can get it on any fastboot rom

devcon69 said:
Just flash cust.img via fastboot. You can get it on any fastboot rom
Click to expand...
Click to collapse
I need this for another phone, so unfortunately I cant do that

How To Guide How to extract boot img files with TWRP and root your phone [OOS open beta F.08 Android 13]

Hi,
for those who want to install and root the open beta based on android 13, here's how.
Prerequisite
- SDK Platform-Tools for Windows
- OnePlus_USB_Drivers_Setup
- TWRP image file for OnePlus 9 pro
- usb tpye-C otg cable and FAT32 memory card
or usb type-C/usb type-A dual socket memory card
- Android Bootloader Interface driver
Download links for OnePlus 9 Pro full packages:
OnePlus 9 Pro (IN)
OnePlus 9 Pro (NA)
- Be sure that your device is in the latest OxygenOS 12 version C.63 and completely unrooted.
You will need this apk to perform the update: OPLocalUpdate_For_Android12.apk
Be careful this operation will erase all your data. Back them up before updating
- Once the update is done, unlock the bootloader and enable usb debugging.
1- Download the latest TWRP: twrp-3.6.2_11-0-lemonadep.img and put it in the fastboot folder of your pc ( with this twrp you will not be able to access your phone's internal memory but that's not a problem, that's why we need a usb key ).
2- Start your phone in fastboot mode then connect it to your pc.
3- open a command prompt on your pc from the fastboot folder and run ( don't flash, only boot) : fastboot boot twrp-3.6.2_11-0-lemonadep.img
4- once in twrp, connect a usb key to your phone, select Mount / Select Storage / USB storage.
5- go back to Advanced and to Terminal.
6- in the TWRP terminal run : dd if=/dev/block/bootdevice/by-name/boot of=/usbstorage/boot.img
7- disconnect the usb key and plug it into your pc to check that the extraction was successful and that the boot file is indeed present on the usb key.
8- restart your phone.
9- copy and paste the extracted boot.img into the phone's internal memory.
You now have the boot.img file to patch, you just need to install magisk to patch the file.
So as not to end up in bootloop, remember to always test the file with the command : fastboot boot magisk_patched.img
If the phone restarts and you are rooted, reboot to fastboot and run : fastboot flash boot magisk_patched.img
Stock and patched files : LE2121 boot img files / LE2125 boot img files

thanks! this method worked for me.

Shouldn't this same process (incl. TWRP) work on the oneplus 9?

4Xrayk said:
Shouldn't this same process (incl. TWRP) work on the oneplus 9?
Click to expand...
Click to collapse
Normally yes, you just have to use TWRP recovery of your model.

What if I am already in c.63 rooted? Plus where in the steps did you install Android 13?

samdaman91 said:
What if I am already in c.63 rooted? Plus where in the steps did you install Android 13?
Click to expand...
Click to collapse
Updating from c63 to f08 didn't work for me, I had to unroot completely for it to work.
to install the full ota update you must first install this apk OPLocalUpdate_For_Android12.apk.
copy the android13 zip file to your phone (\sdcard)
open OPLocalUpdate_For_Android12 and go to top right corner
select the zip file
Look at Steve0007 thread . Thanks for his work

buu'buu said:
Updating from c63 to f08 didn't work for me, I had to unroot completely.
View attachment 5719027
View attachment 5719023
to install the full ota update you must first install this apk OPLocalUpdate_For_Android12.apk.
copy the android13 zip file to your phone (\sdcard)
open OPLocalUpdate_For_Android12 and go to top right corner
select the zip file
Look at Steve0007 thread . Thanks for his work
Click to expand...
Click to collapse
ok so after unrooting your phone under android 12, you just updated it to android 13 beta? when are you supposed to be back majisk?

I extracted the boot file with TWRP, patched the file and did rooting

what region is your c63 rom?

buu'buu said:
I extracted the boot file with TWRP, patched the file and did rooting
Click to expand...
Click to collapse
how is that possible? TWRP does not work in android 12

I did it , the extracted files are at the bottom of the first post.
it's the file decryption that doesn't work.
With payload dumper I did not succeed.

hey guys I have done a similar thing.
I patched the boot.img from payload.bin using payload dumper.
This is the patched file.
magisk_patched.img
drive.google.com
Copy the file to pc.
Phone to fastboot mode.
Connect via usb.
Enter Powershell using Left Shift + Right CLick
Enter command: fastboot boot <patched file>
It will reboot your phone. If not, enter command: fastboot reboot.
Once rebooted.
Install Magisk App and direct install after this.
Enjoy.
*THIS IS FOR ALL WHO HAVE LOST ROOT ACCESS AFTER UPDATING. BUT CAN ALSO BE FOLLOWED AFTER UNLOCKING THE BOOTLOADER THE 1ST TIME. THIS IS FOR INDIAN VERSIONS ONLY.*

This is for Indian Version only.

how to make system R/0? i need to delete/uninstall system apps and install vanced youtube

this.guy.lol said:
how to make system R/0? i need to delete/uninstall system apps and install vanced youtube
Click to expand...
Click to collapse
GitHub - 0x192/universal-android-debloater: Cross-platform GUI written in Rust using ADB to debloat non-rooted android devices. Improve your privacy, the security and battery life of your device.
Cross-platform GUI written in Rust using ADB to debloat non-rooted android devices. Improve your privacy, the security and battery life of your device. - GitHub - 0x192/universal-android-debloater:...
github.com
Use this to remove stock YouTube app. Then use Vanced Manager to install Vanced.

Here are the files for the EU version (LE2123_11_F.08).
I booted to the patched img and installed Magisk from the manager, worked perfectly.
stock boot.img
patched boot.img

mrironsights said:
GitHub - 0x192/universal-android-debloater: Cross-platform GUI written in Rust using ADB to debloat non-rooted android devices. Improve your privacy, the security and battery life of your device.
Cross-platform GUI written in Rust using ADB to debloat non-rooted android devices. Improve your privacy, the security and battery life of your device. - GitHub - 0x192/universal-android-debloater:...
github.com
Use this to remove stock YouTube app. Then use Vanced Manager to install Vanced.
Click to expand...
Click to collapse
is it 100 percent confirmed working? hate to go through the hassle of installing only for it to not work

this.guy.lol said:
is it 100 percent confirmed working? hate to go through the hassle of installing only for it to not work
Click to expand...
Click to collapse
Works. 100%

mrironsights said:
Works. 100%
Click to expand...
Click to collapse
obviously it dnt.....link me the file that does....

Worked for me. Whats the issue?

Question cant flash anything after flashing custom rom.. please help ASAP

tried many custom roms with recoveries but after flashing rom cant install magisk because of this !! help needed !!

You need after install customrom instal in system Magisk apk
After in app magisk patch boot.img from your customrom. This file patched in Download folder. Transfer to your PC and this file patchedboot.img flash in Fastbooy mode command with adb
Fastboot flash boot patchedfile.img
After patch magisk work
Patch here

Works for me with PixelOs or PixelExperience

boneszbo said:
You need after install customrom instal in system Magisk apk
After in app magisk patch boot.img from your customrom. This file patched in Download folder. Transfer to your PC and this file patchedboot.img flash in Fastbooy mode command with adb
Fastboot flash boot patchedfile.img
After patch magisk work
Patch here
View attachment 5769251
View attachment 5769253
Click to expand...
Click to collapse
ur 3rd photo does not showed up !

boneszbo said:
You need after install customrom instal in system Magisk apk
After in app magisk patch boot.img from your customrom. This file patched in Download folder. Transfer to your PC and this file patchedboot.img flash in Fastbooy mode command with adb
Fastboot flash boot patchedfile.img
After patch magisk work
Patch here
View attachment 5769251
View attachment 5769253
Click to expand...
Click to collapse
what patched file ??? u mean from magisk zip img file ?

1. Install Customrom like PixelOS before u install u flash via fastboot file boot.img
After install Customrom u must the same file from your Rom patch Via Magisk so u must install Magisk.apk in Android
In Android Magisk App u must click Install and patch file from ur Rom Boot.img
New file save in Download Patched_boot.img
This file transfer to your computer
Go phone to fastboot mode and flash with command new file patched
Fastboot flash boot patched_boot.img
After flash boot recovery u have install Magisk correctly
Examples:
How to Root Pixel Experience ROM via Magisk [Video]
In this comprehensive tutorial, we will show you the steps to root your Pixel Experience ROM via Magisk patched boot.img file
www.droidwin.com
U only need download recovery boot from ur CustomRom u dont need extract payload.bin

U must patch this file via Magisk application in PixelOs for examples

So first go to
GitHub - topjohnwu/Magisk: The Magic Mask for Android
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
Download magisk.apk and install
In Magisk App patch boot file img after flash it with PC
Done u goot Magisk installed with root

Remember to use boot file from your customrom not other... If u use PixelOs u need boot recovery from PixelOs etc. !!

boneszbo said:
1. Install Customrom like PixelOS before u install u flash via fastboot file boot.img
After install Customrom u must the same file from your Rom patch Via Magisk so u must install Magisk.apk in Android
In Android Magisk App u must click Install and patch file from ur Rom Boot.img
New file save in Download Patched_boot.img
This file transfer to your computer
Go phone to fastboot mode and flash with command new file patched
Fastboot flash boot patched_boot.img
After flash boot recovery u have install Magisk correctly
Examples:
How to Root Pixel Experience ROM via Magisk [Video]
In this comprehensive tutorial, we will show you the steps to root your Pixel Experience ROM via Magisk patched boot.img file
www.droidwin.com
U only need download recovery boot from ur CustomRom u dont need extract payload.bin
Click to expand...
Click to collapse
there is no recovery boot so i think i need to extract playload.bin

Try PixelOs good Rom everythings work. Photos google unlimited srorage...
And u got recovery boot img file

boneszbo said:
Remember to use boot file from your customrom not other... If u use PixelOs u need boot recovery from PixelOs etc. !!
Click to expand...
Click to collapse
i am using awoken os !!
https://sourceforge.net/projects/pr...iton-lisa-official-1240-20221018.zip/download
i extracted the rom but there is no img file

boneszbo said:
Try PixelOs good Rom everythings work. Photos google unlimited srorage...
And u got recovery boot img file
Click to expand...
Click to collapse
ok flashing pixel os again then !!!

U have here boot awaken os

U need patch thia boot.img file via Phone Magisk and flash via fastboot.
Done

boneszbo said:
Try PixelOs good Rom everythings work. Photos google unlimited srorage...
And u got recovery boot img file
Click to expand...
Click to collapse
dude I was so tired that I could not understand what u said but it was so simple !!!! thanks for the help !!!! thank you so much !!!

boneszbo said:
U need patch thia boot.img file via Phone Magisk and flash via fastboot.
Done
Click to expand...
Click to collapse
yes it was simple but those links and tutorials confused me !!! again thanks for the big help

Welcome back...