Only SystemUI Change - MTCD Android Head Units General

I have a sofia3gr_car-userdebug 5.1.1 LMY49F eng.bsp.20170818.112434 test-keys head unit for Nissan. The SystemUI sucks and i wanted to change it with some other one. Questions are:
1. What are the available options?
2. Step-by-step instruction to change the System UI.
** The current UI shows A/C controls.
Current head unit pics are attached.
BTW I am a newbie in Head unit area, but has experience in android ROM flashing etc.

Bump

Related

Change mtcb and updating the rom

Is this rom only for screens from Joying company or is it ok to have it in any other screens company ?
my car 's system is mtcp ksp, can I installed this rom?
if any one can explain this briefly i would really appreciate that.
the second thing is
i have another screen 5.1.1 i wolud like to have Launcher like this :
http://dl-1.va.us.xda-developers.com...&ts=1468972793
If you could read the wiki you will have all your answers.
Here's some hints :
When flashing a rom the only thing you need to know is : The type (MTCB, MTCC, MTCD...), processor (Rk 3066 or Rk 3188) and screen resolution (800x480 or 1024x600). Regardind the MCU, just don't touch it (there is no custom MCU yet). Flashing a MCU is the best way to brick your device.
The launcher is actualy a app. Just search Google play and install what ever launcher you want.

Restore MCU: MTCD_KGL

Please I need your help, I am extremely worried trying to return my DVD CAR to its initial state.
My unit originally had the following data:
MCU: MTCD_KGL_V1.40_1
Android 5.1.1
rk3188-userdebug 09032016
Then, looking for improvements, update the firmware to the version
[ROM] [PX3] [RK3188] [Nougat] [7.1.2] Hal9k ROM 2 for ALL RK3188 / PX3 MTCD / E.
Instead of improving my equipment, it became very slow, play store services do not work for me and almost all applications give me an error.
Please I am not criticizing this version, I am sure the errors that I mention are due to an incorrect installation of my part.
The biggest problem of all is that I can not find a way to return to my old installation with Android 5.1.
Please I'm going crazy looking for a way to restore my equipment but for more I read the different posts every time it gets more complicated "
1- What should be the proper firmware to install
2- Where is the rom stock that I must download, etc etc
I would eternally thank whoever can help me out and give me some advice.
I hope your help

Xtrons PR98MTVL Update Android Firmware

Hi
I have an Xtrons PR98MTVL head unit which i would like to update the Android firmware.
Firstly I'm a total newbie to this but am a geek and have a good level of computer skills (if that actually helps at all these days!!??)
My questions are:
1. How do I find out what I currently have.
2. How do I found out what I can flash my head unit with.
3. How do I back up my existing firmware (god forbid I brick the damn thing!)
4. How do I flash the head unit with the firmware and enjoy all of the newer apps I currently cant access.
5. How do I make changes to the front screen layout or add a theme to the head unit?
Thanks in advance for your help.
Obvs if these questions have been asked and answered elsewhere (i did have a look but didnt find enough specific iunfo) then please just paste a link to that thread.
Lee
Open the settings of your device and open the software info.
There will be information like: Android version; MCU version and CPU info.
Screenshot that and post it here.

Head unit

I want to create a higher android version to my head unit. what can I do?
I cant install any app on my head unit ..
all I want to install android auto and I cant cause its android 4.1.1 .
Buy a new head unit?

Dasaita - Latest MCU and Updates for Dasita PX6 1280x720 MAX10

For Dasaita PX6
Updates on Dasaita website: https://www.dasaita.com/blogs/news/update-firmware
-----
Older versions:
Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ
MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment MTCE_HA_V3.57.zip
v3.60: View attachment MTCE_HA_V3.60.zip
v3.62: View attachment MTCE_HA_V3.62.ZIP
DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment dmcu-1280x720.zip - use it if you got a wrong resolution after flashing MCU image and you need to restore your unit to 1280x720 resolution
All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory)
orik13 said:
For Dasaita PX6
Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ
MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment 5111231
v3.60: View attachment 5111233
v3.62: View attachment 5111235
DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment 5111237 - use it if your unit has 1280x720 resolution, otherwise you can get 1024x600 or lower instead (no worries in this case - just reprogram)
All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory)
Click to expand...
Click to collapse
Before even considering this read in the other thread what happen to my unit. User name halloj,
orik13 said:
For Dasaita PX6
Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ
MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment 5111231
v3.60: View attachment 5111233
v3.62: View attachment 5111235
DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment 5111237 - use it if your unit has 1280x720 resolution, otherwise you can get 1024x600 or lower instead (no worries in this case - just reprogram)
All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory)
Click to expand...
Click to collapse
Anyone reading this
*** Do not flash the DMCU.ext listed here together with the MCU ***
OP please edit this post, there is NO reason to flash dmcu.ext when flashing the same vendor MCU.
Suggest expanding on the comment "no worries just reprogram", with clear examples if making this statement.
marchnz said:
Anyone reading this
*** Do not flash the DMCU.ext listed here together with the MCU ***
OP please edit this post, there is NO reason to flash dmcu.ext when flashing the same vendor MCU.
Suggest expanding on the comment "no worries just reprogram", with clear examples if making this statement.
Click to expand...
Click to collapse
I edited it to make it more clear. Your comment is not absolutely correct: it is based on my own experience. Similar issues can be found by googling and even here at xda
Hi all I am a bit confused by how many different downloads please excuse me as a noob and first time flashing my PX6
My question is can I just jump from 3.5.8-1 to the latest 3.6.2 I believe and what files exactly do I need to load onto a flash drive.
Your help in advance is much appreciated. Cheers J
I am running a MTCE HA running 3.5.9
ToyotaJay said:
Hi all I am a bit confused by how many different downloads please excuse me as a noob and first time flashing my PX6
My question is can I just jump from 3.5.8-1 to the latest 3.6.2 I believe and what files exactly do I need to load onto a flash drive.
Your help in advance is much appreciated. Cheers J
I am running a MTCE HA running 3.5.9
Click to expand...
Click to collapse
Suggest NOT changing your MCU unless resolving a known issue. Same for Android. This is a head unit, constantly updating isn't necessary.
Update for mic issue
Hi Experts! If I want to update my Dasaita PX6 Max10 is there any preferred order which update to do first OTA or MCU? In case of OTA update at starting is it necessary to click on WIPE AND FORMAT FLASH option? Somebody is doing this, somebody is doing that... When is it suggested?
The reason why I planning to switch to latest update because during calls my mic is working strange, sometimes the others cannot hear me properly. They are complaining about low volume and faded voice. (If they are calling back they says it is better...) Have you experienced the same thing?
halloj said:
Before even considering this read in the other thread what happen to my unit. User name halloj,
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=83671635&postcount=3655
gomoriz said:
Hi Experts! If I want to update my Dasaita PX6 Max10 is there any preferred order which update to do first OTA or MCU? In case of OTA update at starting is it necessary to click on WIPE AND FORMAT FLASH option? Somebody is doing this, somebody is doing that... When is it suggested?
The reason why I planning to switch to latest update because during calls my mic is working strange, sometimes the others cannot hear me properly. They are complaining about low volume and faded voice. (If they are calling back they says it is better...) Have you experienced the same thing?
Click to expand...
Click to collapse
Are you sure it is not a h/w issue? Did you try other mic?
orik13 said:
Are you sure it is not a h/w issue? Did you try other mic?
Click to expand...
Click to collapse
I use the internal microphone, not yet tried an external one. I checked the mic with apps, basically it is working however its volume seems to be a little bit low, but it is not faded. I feel it is rather a noise suppression issue (coming from sw side), therefore I hope that an update could help.
orik13 said:
I edited it to make it more clear. Your comment is not absolutely correct: it is based on my own experience. Similar issues can be found by googling and even here at xda
Click to expand...
Click to collapse
I respectfully disagree based on years of experience: there's no need to flash the MCU configuration file DMCU with an MCU that matches the manufacturer of your head unit. I.e. HA to HA, JY to JY etc.
Your well meaning advice resulted in a configuration not appropriate (which messed up the screen) for another members screen type/resolution.
The 'similar issues' stated are probably your misunderstanding of what the DMCU file is and possibly where others have installed a different vendor MCU. E.g. GS on HLA
Hello, with dasaita px6 android 10 1024/600 firmware HA3, the update "HA3_rk3399_10.0_ota (20200915) 升级 包" and MCU "MTCE_HA_V3.62": all is ok , thank you
A few questions...
1) Anybody able to modify steering wheel controls? I open the app and it is blank.
2) Also, can you summon siri/google via the steering wheel when in carplay/android auto?
3) I have an OBD dongle but am unable to get the headunit to connect to it. I see it in the available devices but nothing happens after i select "yes" to connect.
I have the max10 600p resolution version for highlander. A canbus was included and I am able to change vol/toggle modes.
h0va4life said:
A few questions...
1) Anybody able to modify steering wheel controls? I open the app and it is blank.
2) Also, can you summon siri/google via the steering wheel when in carplay/android auto?
3) I have an OBD dongle but am unable to get the headunit to connect to it. I see it in the available devices but nothing happens after i select "yes" to connect.
I have the max10 600p resolution version for highlander. A canbus was included and I am able to change vol/toggle modes.
Click to expand...
Click to collapse
When you install a harness with a CAN adapter the steering wheel signals a routed for you to the CAN decoder box. It worked for me to reroute them to my own circuit. It should be equally fine to connect them to the KEY1 and KEY2 inputs, that is if your car has resistive buttons and only one or two. Then you can program them as desired.
Flashed 20200915 and the 2.62_1 (with a different dmcu.ext provided by dasaita that had screen:18 inside it). Everything has been working great but there is an annoying notification everytime I switch the car on that shows the version number - is there anyway to get rid of this?
woggles said:
Flashed 20200915 and the 2.62_1 (with a different dmcu.ext provided by dasaita that had screen:18 inside it). Everything has been working great but there is an annoying notification everytime I switch the car on that shows the version number - is there anyway to get rid of this?
Click to expand...
Click to collapse
I noticed that the first time I installed that update, then I went back to the prior version I had, one more time I gave it a try and I started to try to remove that annoying notification, but then I thought why waste time on that, also I notice that saving a screenshot was giving me an error, so once again I went back to the prior version I had installed.
I can’t decide whether to put this up or Malayk’s ROM. I don't really need pre-installed programs, I know which launcher, music player, etc.. I want to use, but there may be settings in it that I can't solve on this ROM.
woggles said:
Flashed 20200915 and the 2.62_1 (with a different dmcu.ext provided by dasaita that had screen:18 inside it). Everything has been working great but there is an annoying notification everytime I switch the car on that shows the version number - is there anyway to get rid of this?
Click to expand...
Click to collapse
Try
https://forum.xda-developers.com/showpost.php?p=83767241&postcount=3694
bad for me
thienthanty said:
Try
https://forum.xda-developers.com/showpost.php?p=83767241&postcount=3694
Click to expand...
Click to collapse
hello, with this firmware "HA3_rk3399_10.0_ota (20201016) 升级 包", I can no longer make a call with "google voice".
thienthanty said:
Try
https://forum.xda-developers.com/showpost.php?p=83767241&postcount=3694
Click to expand...
Click to collapse
Thanks, the annoying pop up is gone but as another use mentioned using call x from Google Assistant doesn't work anymore!

Categories

Resources