Related
Anyone know what this is for?
Jrocker23 said:
Anyone know what this is for?
Click to expand...
Click to collapse
Hm. 612 megs. That could be....well let's see.
Sent from my Nexus 6 using Tapatalk
Installed and currently on the Android is upgrading/Optimizing apps screen...... Hopefully won't take too much longer.
software repair patch for 5.1 as told by vzw customer service. what it is repairing i dont know
3.10.605.7 / Base: 2.12.C1144073
Nothing different.... Seems just like a security patch.
http://www.verizonwireless.com/support/htc-one-m9-update/
SnoStorm said:
Nothing different.... Seems just like a security patch.
http://www.verizonwireless.com/support/htc-one-m9-update/
Click to expand...
Click to collapse
One can only wonder what the heck verizon does to their software such that it requires a 612meg security patch huh?
Anyhow.. Time to use that nandroid i posed in the dev section to accept the OTA.. -or- I will post an updated one later this evening.
Probably 600mb of updated NFL bloatware included and the rest just the security update.
Any word yet on whether this is really just a 612Meg security patch?
jtommyj said:
Any word yet on whether this is really just a 612Meg security patch?
Click to expand...
Click to collapse
yup, nothing special
Anyone know if letting this thing run and update will break root? I'm stock, rooted. Don't want to lose that and not be able to get it back myself.
baune7 said:
Anyone know if letting this thing run and update will break root? I'm stock, rooted. Don't want to lose that and not be able to get it back myself.
Click to expand...
Click to collapse
are you SOFF? if so, you will be fine
Yes.. I'm s-off and unlocked. So after it updates, will it still be rooted? Or would I havery to re-root it? I'm just worried because my cable Internet isn't working for a few days and I need my wifi tether. Thanks
Ran into an issue with this update. It failed to install on 11/3 with a error code 409, but when I try to download it again by selecting "Check for new system updates" it says I have the latest update. I've rebooted a number of times and it shows up every time. From what little information I can find online, I have to reset my phone to factory then attempt to update again. I want to avoid this so here I am.
I'm on my phone so I can't properly upload the screenshots. I posted Google Drive links for now
https://drive.google.com/file/d/0B__V8WYcxeW8dkVxOXktZXZHcVU/view?usp=sharing
https://drive.google.com/file/d/0B__V8WYcxeW8YWdsU1kyMmZOcFk/view?usp=sharing
gumbyx84 said:
Ran into an issue with this update. It failed to install on 11/3 with a error code 409, but when I try to download it again by selecting "Check for new system updates" it says I have the latest update. I've rebooted a number of times and it shows up every time. From what little information I can find online, I have to reset my phone to factory then attempt to update again. I want to avoid this so here I am.
I'm on my phone so I can't properly upload the screenshots. I posted Google Drive links for now
https://drive.google.com/file/d/0B__V8WYcxeW8YWdsU1kyMmZOcFk/view?usp=docslist_api
https://drive.google.com/file/d/0B__V8WYcxeW8dkVxOXktZXZHcVU/view?usp=docslist_api
Click to expand...
Click to collapse
Flash the custom firmware zip and restore the nandroid I posted of the update. Then wipe data for the app htcdm. Flash supersu.zip and you're done.
Sent from my Nexus 6 using Tapatalk
dottat said:
Flash the custom firmware zip and restore the nandroid I posted of the update. Then wipe data for the app htcdm. Flash supersu.zip and you're done.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm not rooted.
Update: I decided to just to a factory reset. Thankfully it worked and I am at the latest firmware.
So I've tried letting this update run a couple times. Downloading for the third time as I write this. When it tries to install, it just reboots into TWRP recovery and does nothing. Then I restart the phone and basically start the process all over again. Any guidance on how to get this squared away?? I met one of the members here with a card who S-offed, unlocked, rooted, my phone which I'm thankful for. Just want to be stock rooted is all. Don't really do much with custom roms on this phone. Thanks.
baune7 said:
So I've tried letting this update run a couple times. Downloading for the third time as I write this. When it tries to install, it just reboots into TWRP recovery and does nothing. Then I restart the phone and basically start the process all over again. Any guidance on how to get this squared away?? I met one of the members here with a card who S-offed, unlocked, rooted, my phone which I'm thankful for. Just want to be stock rooted is all. Don't really do much with custom roms on this phone. Thanks.
Click to expand...
Click to collapse
I'm pretty sure you need stock recovery to take an OTA.
SigLover21 said:
I'm pretty sure you need stock recovery to take an OTA.
Click to expand...
Click to collapse
Ok.. Thanks.. I'll have to check into that
Is it possible to downgrade to NDE63P from NDE63X? Wanting to root now that TWRP is available...
Bootloader IS still locked...
nozzleman_85 said:
Is it possible to downgrade to NDE63P from NDE63X? Wanting to root now that TWRP is available...
Bootloader IS still locked...
Click to expand...
Click to collapse
Not if you have a locked bootloader
Cozzeck said:
Not if you have a locked bootloader
Click to expand...
Click to collapse
How would I go about doing this, I have a Verizon pixel xl that's unlocked and I am on the X update and would like to revert to P
shibbnasty said:
How would I go about doing this, I have a Verizon pixel xl that's unlocked and I am on the X update and would like to revert to P
Click to expand...
Click to collapse
What's the point of returning to P?
Sent from my Pixel XL using Tapatalk
david.degraw54 said:
What's the point of returning to P?
Click to expand...
Click to collapse
Well I'm trying to fix and issue I'm having with the camera flash, ever since the update it will only flash once and then will not work again with any app no matter what until I do a restart. It worked before the update and nothing happened to the phone so I wanted to see if going back might fix it before I have to get a refurbished one from Verizon.
shibbnasty said:
Well I'm trying to fix and issue I'm having with the camera flash, ever since the update it will only flash once and then will not work again with any app no matter what until I do a restart. It worked before the update and nothing happened to the phone so I wanted to see if going back might fix it before I have to get a refurbished one from Verizon.
Click to expand...
Click to collapse
Well first you need to unlock your bootloader: http://theroot.ninja/depixel8.html
After that, download the P factory image from Google's site and follow instructions to install. Just remember to backup stuff you want (photos, files, anything saved on storage) because unlocking will perform a factory reset.
Sent from my Pixel XL using Tapatalk
david.degraw54 said:
Well first you need to unlock your bootloader: http://theroot.ninja/depixel8.html
After that, download the P factory image from Google's site and follow instructions to install. Just remember to backup stuff you want (photos, files, anything saved on storage) because unlocking will perform a factory reset.
Click to expand...
Click to collapse
Already unlocked and downloaded the images and tried to install as the directions but during the process it says boot.img and recovery.img is missing even though I did exactly what it said.
---------- Post added at 12:59 AM ---------- Previous post was at 12:54 AM ----------
Not really sure what I'm doing wrong at this point and I'm stuck
Did you copy the files into the fastboot and adb program file?
They need to be in there for it to work.
shibbnasty said:
Already unlocked and downloaded the images and tried to install as the directions but during the process it says boot.img and recovery.img is missing even though I did exactly what it said.
---------- Post added at 12:59 AM ---------- Previous post was at 12:54 AM ----------
Not really sure what I'm doing wrong at this point and I'm stuck
Click to expand...
Click to collapse
Your using an outdated ADB and Fastboot (like 99% of the people on this forum).
Here is the latest: https://dl.dropboxusercontent.com/u/31360541/platform-tools-version_1.0.36-API_25.zip
Scott said:
Your using an outdated ADB and Fastboot (like 99% of the people on this forum).
Here is the latest: https://dl.dropboxusercontent.com/u/31360541/platform-tools-version_1.0.36-API_25.zip
Click to expand...
Click to collapse
Thank you, worked after that and I am back to P but unfortunately my flash is still not working correctly. Sucks in passed the 14 day return so I'll get a refurbished when the phone is practically brand new.
shibbnasty said:
Thank you, worked after that and I am back to P but unfortunately my flash is still not working correctly. Sucks in passed the 14 day return so I'll get a refurbished when the phone is practically brand new.
Click to expand...
Click to collapse
There might not be any refurbished phones to send you so you might luck out. Better to try now than later when they have a big stock of returned phones. Or I'm crazy and you'll get one either way...
Jacobk85 said:
There might not be any refurbished phones to send you so you might luck out. Better to try now than later when they have a big stock of returned phones. Or I'm crazy and you'll get one either way...
Click to expand...
Click to collapse
Yea I'm really hoping not to get a refurbished. I'm gonna do my best to see that I get a new one but if not I guess oh well. I have a 32g really blue model so not sure if they even have any new ones.
shibbnasty said:
Yea I'm really hoping not to get a refurbished. I'm gonna do my best to see that I get a new one but if not I guess oh well. I have a 32g really blue model so not sure if they even have any new ones.
Click to expand...
Click to collapse
Thanks for hijacking my thread dude....
nozzleman_85 said:
Thanks for hijacking my thread dude....
Click to expand...
Click to collapse
Sorry man....
shibbnasty said:
Well I'm trying to fix and issue I'm having with the camera flash, ever since the update it will only flash once and then will not work again with any app no matter what until I do a restart. It worked before the update and nothing happened to the phone so I wanted to see if going back might fix it before I have to get a refurbished one from Verizon.
Click to expand...
Click to collapse
Doubt you'd get a refurbished unit at this point, you'd still get one from replacement stock set aside for early issues.
nozzleman_85 said:
Is it possible to downgrade to NDE63P from NDE63X? Wanting to root now that TWRP is available...
Bootloader IS still locked...
Click to expand...
Click to collapse
You will need to unlock your bootloader. Why do you need to downgrade though? You can root and install TWRP on nde63x.
cambunch said:
You will need to unlock your bootloader. Why do you need to downgrade though? You can root and install TWRP on nde63x.
Click to expand...
Click to collapse
I realized that after a little research.. that's my fault..
Hi
Does anyone know anything a out the current status of Flashfire on the Pixel (XL)?
I've tried to backup data and the screen turned black, afterwards I hard to hard reset the phone to get it working again.
niko26 said:
Hi
Does anyone know anything a out the current status of Flashfire on the Pixel (XL)?
I've tried to backup data and the screen turned black, afterwards I hard to hard reset the phone to get it working again.
Click to expand...
Click to collapse
Good place to start https://plus.google.com/+Chainfire
danw_oz said:
Good place to start https://plus.google.com/+Chainfire
Click to expand...
Click to collapse
I've tried to contact him already, plus asked him in one of his threads/posts. No response.
niko26 said:
I've tried to contact him already, plus asked him in one of his threads/posts. No response.
Click to expand...
Click to collapse
It's probably because he got sick of being asked the same question over and over again.
If I read the XDA forums http://forum.xda-developers.com/general/paid-software/flashfire-t3075433 searching for the word PIXEL. This app appears that people have this working on Pixel XL, but not since the November release
danw_oz said:
It's probably because he got sick of being asked the same question over and over again.
If I read the XDA forums http://forum.xda-developers.com/general/paid-software/flashfire-t3075433 searching for the word PIXEL. This app appears that people have this working on Pixel XL, but not since the November release
Click to expand...
Click to collapse
Thanks for your comment.
I was not asking why he was not replying to my questions - I've got total sympathy for that because the number of messages he might get must be insane.
My question still stands: Obviously Flashfire is not yet aware of the different layout of partitions on the Pixel phones. Does it still work correctly? If not, did Chainfire say anything about Flashfire being fixed to work with the pixels? I couldn't find anything, that's why I'm asking here.
I assume any announcement on it working on the Pixel will be made when it works on the Pixel. Much like superSU. (hope that doesnt sound like an ass thing to say) it's just the way things have been. unless someone else works on something and it looks like they are going to beat another dev to the punch, you don't usually see any info, much like boot-loader unlocks, rooting of a certain phone etc.. i.e when there is a bounty and team blahblah looks like they gonna take the glory, BANG! suddenly there's a solution that said dev was already working on secretly but wasn't planing on releasing any time soon but since there's competition, kinda thing. Know what I mean?
SuperSU is going to be a much higher priority for him to get going reliably with twrp and the new partition layout.
larsdennert said:
SuperSU is going to be a much higher priority for him to get going reliably with twrp and the new partition layout.
Click to expand...
Click to collapse
Hey just curious what you mean by this. I know that TWRP has some bugs but I thought everything with SuperSU was worked out
I'm thinking they are still working on having them coexist without one wiping the other
larsdennert said:
I'm thinking they are still working on having them coexist without one wiping the other
Click to expand...
Click to collapse
No they work fine, especially SuperSU. TWRP is in alpha but works for installing and most other things but backup and restore does not yet.
larsdennert said:
I'm thinking they are still working on having them coexist without one wiping the other
Click to expand...
Click to collapse
Wow, that was like week number one.
You're waaaaaay behind on updates.
Lol then we should get on chain fires case
larsdennert said:
SuperSU is going to be a much higher priority for him to get going reliably with twrp and the new partition layout.
Click to expand...
Click to collapse
What? SuperSU working perfectly with twrp. As others said twrp still in alpha and some features are iffy, but SuperSU is solid.
Without Flashfire, how do we install a new OTA update if we are rooted? What's the proper/safe procedure?
s1dest3pnate said:
Without Flashfire, how do we install a new OTA update if we are rooted? What's the proper/safe procedure?
Click to expand...
Click to collapse
Are you verizon?
Because if you're verizon then add Verizon to your profile so people can appropriately address your questions.
And add your freaking state/country while you're at it. :good:
CZ Eddie said:
Are you verizon?
Because if you're verizon then add Verizon to your profile so people can appropriately address your questions.
And add your freaking state/country while you're at it. :good:
Click to expand...
Click to collapse
My apologies. T-Mobile, US - added to profile. Thanks for the suggestion!
s1dest3pnate said:
Without Flashfire, how do we install a new OTA update if we are rooted? What's the proper/safe procedure?
Click to expand...
Click to collapse
You can sideload the update via ADB supposedly.
I've never used that method though.
I just flash the entire update on top of my old OS using flashboot and my guide here:
http://forum.xda-developers.com/pixel-xl/how-to/info-how-restored-to-stock-soft-t3494478
Make sure to remove the -w from the script if you don't want your old data/apps wiped.
Then re-root your phone afterwards.
Nothing to worry about there if it's not a Verizon phone.
s1dest3pnate said:
Without Flashfire, how do we install a new OTA update if we are rooted? What's the proper/safe procedure?
Click to expand...
Click to collapse
I do it like in this guide http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
Very helpful, thanks guys. I did it and it worked - ran flash-all with -w removed. I wonder though if there's any downside to doing this that may not have been identified yet, such as extra space being taken up or diminished performance (even if negligible) possibly due to some duplication of data or something like that.
s1dest3pnate said:
Very helpful, thanks guys. I did it and it worked - ran flash-all with -w removed. I wonder though if there's any downside to doing this that may not have been identified yet, such as extra space being taken up or diminished performance (even if negligible) possibly due to some duplication of data or something like that.
Click to expand...
Click to collapse
No, no downside at all. Flash all without the -w is how most people do it. It could even be argued that it is better.
Sent from my Pixel XL using XDA Labs
This time it's the real deal and not a beta/mfn version.
The update comes bundled with the January 2020 Security Patch and has the build number QSA30.62-24
As usual, the update is rolling out in batches... As by far, only users of the first batch of devices have received the OTA update.
The other batches (02/2019 and so on...) are still waiting in line.
My phone's batch is 06/2019... So I'll have to wait a little more
EDIT: As Of Today, January 13 2020, the OTA update, versioned QSA30.62-24 is out for All Users of the Motorola One Vision In Brazil using the Retail Software Channel (RETBR).
I just updated my phone and did a hard reset to start clean.
how do you know which batch is your phone?
BRZ_Speedster said:
This time it's the real deal and not a beta/mfn version.
The update comes bundled with the January 2020 Security Patch and has the build number QSA30.62-24
As usual, the update is rolling out in batches... As by far, only users of the first batch of devices have received the OTA update.
The other batches (02/2019 and so on...) are still waiting in line.
My phone's batch is 06/2019... So I'll have to wait a little more
Click to expand...
Click to collapse
How can I know my device's batch?
SnoopDoge said:
how do you know which batch is your phone?
Click to expand...
Click to collapse
Look at the decal on the side of the box, which shows the IMEI numbers... Below there is a text saying "Date:" -- The following number after "Date" is your phone's batch number.
Is it not possible now to somehow download it an apply it yourself manually for your phone?
Nicofisi said:
Is it not possible now to somehow download it an apply it yourself manually for your phone?
Click to expand...
Click to collapse
It is, but someone would have to capture the OTA Zip file first and upload it on the web.
Hope someone here does
BRZ_Speedster said:
It is, but someone would have to capture the OTA Zip file first and upload it on the web.
Click to expand...
Click to collapse
just as i wrote on motorola forums:
i just found the zip can be downloaded with Lenovo Moto Smart Assistant PC companion program on a Flash tab, it's unfortunately unavailable for me though, just a tip for those with update available
Click to expand...
Click to collapse
then you can just sideload like this, haven't tried that though
Fastboot rom is out for retbr.
Gonna flash it to my reteu xt1970-3 later tonight in wait for reteu rom.
tys0n said:
Fastboot rom is out for retbr.
Gonna flash it to my reteu xt1970-3 later tonight in wait for reteu rom.
Click to expand...
Click to collapse
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
Where did you download it from?
Aaronnelhams said:
Where did you download it from?
Click to expand...
Click to collapse
From Lolinet's mirror. However I tried opening it in RSD Lite. No Go. Gives an error.
Image seems to be corrupt. Luckily I didn't do anything to my phone.
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
BRZ_Speedster said:
From Lolinet's mirror. However I tried opening it in RSD Lite. No Go. Gives an error.
Image seems to be corrupt. Luckily I didn't do anything to my phone.
Click to expand...
Click to collapse
Did you try redownloading it? Would you be able to send the mirror link as I couldn't get the website to even find an update for me
Aaronnelhams said:
Did you try redownloading it? Would you be able to send the mirror link as I couldn't get the website to even find an update for me
Click to expand...
Click to collapse
Yes I downloaded it a second time. Both times RSD gave an error.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETBR/ -- Mirror Link
Its the last file there.
But I do advise caution.
BRZ_Speedster said:
Yes I downloaded it a second time. Both times RSD gave an error.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETBR/ -- Mirror Link
Its the last file there.
But I do advise caution.
Click to expand...
Click to collapse
If the file were fine because I have the xt1970-3 will that cause any issues? I don't wanna flash it if it kills my device, even if I can return it
Aaronnelhams said:
If the file were fine because I have the xt1970-3 will that cause any issues? I don't wanna flash it if it kills my device, even if I can return it
Click to expand...
Click to collapse
Do not try flashing this. It WILL brick your phone!
BRZ_Speedster said:
Do not try flashing this. It WILL brick your phone!
Click to expand...
Click to collapse
Alright thanks, how long do you reckon it'll take before the XT1970-3 will get the update anywhere so it could be flashed?
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
So did you make it work? I'm willing to do that but I'm afraid of bricking my phone
BRZ_Speedster said:
Do not try flashing this. It WILL brick your phone!
Click to expand...
Click to collapse
That's wrong. I've flashed retbr and retin to my xt1970-3 without problems.
Bootloader unlocked though.
Now I've just updated to A10 and I can say that I got it rooted with same method as on pie, so twrp and magisk still works.
tys0n said:
That's wrong. I've flashed retbr and retin to my xt1970-3 without problems.
Bootloader unlocked though.
Now I've just updated to A10 and I can say that I got it rooted with same method as on pie, so twrp and magisk still works.
Click to expand...
Click to collapse
Did you download it with the link that was mentioned above?, what actually is the difference between the -1 and the -3 models of motorola one vision? And what method did you use to install it?
Aaronnelhams said:
Did you download it with the link that was mentioned above?, what actually is the difference between the -1 and the -3 models of motorola one vision? And what method did you use to install it?
Click to expand...
Click to collapse
Yes I used the same file. Flashed it with fastboot.
Differences betweeen the models is modem. They have a bit different support for bands.
Motorola One Vision XT1970-3 vs Motorola One Vision XT1970-1
Hi there!
I've installed the full OTA SQ1D.211205.016.A4 using Adb sideload but I had have installed another OTA version, specifically SQ1D.211205.016.A1.
I've tried to install the correct version over using adb sideload but it fails because it says is an older version.
How can I install the correct OTA for my Pixel 6 Pro?
Cheers.
sgbmad said:
Hi there!
I've installed the full OTA SQ1D.211205.016.A4 using Adb sideload but I had have installed another OTA version, specifically SQ1D.211205.016.A1.
I've tried to install the correct version over using adb sideload but it fails because it says is an older version.
How can I install the correct OTA for my Pixel 6 Pro?
Cheers.
Click to expand...
Click to collapse
Hmm strange, as I'd done similarly in that I'd installed A1 and needed A4. However I didn't experience an issue with side loading...
Perhaps you could try flashing the full factory image but with the -w removal (research this fully) to avoid data loss, so essentially dirty flashing the full image should help?
cd993 said:
Hmm strange, as I'd done similarly in that I'd installed A1 and needed A4. However I didn't experience an issue with side loading...
Perhaps you could try flashing the full factory image but with the -w removal (research this fully) to avoid data loss, so essentially dirty flashing the full image should help?
Click to expand...
Click to collapse
Thank you for your response cd993. Then, a full factory image flash with full wipe also works, it's true?
sgbmad said:
Thank you for your response cd993. Then, a full factory image flash with full wipe also works, it's true?
Click to expand...
Click to collapse
Sure, a full wipe will indeed clear all data of yours and install the factory image. But I'd try first to remove the line of code in the flash-all.bat file that prevents a data wipe. Plus also there's the factor of keeping root, if you are actually rooted. Let me know if you need any guidance on this though there are lots of info around on these forums
cd993 said:
Sure, a full wipe will indeed clear all data of yours and install the factory image. But I'd try first to remove the line of code in the flash-all.bat file that prevents a data wipe. Plus also there's the factor of keeping root, if you are actually rooted. Let me know if you need any guidance on this though there are lots of info around on these forums
Click to expand...
Click to collapse
Thank you so much,
Well, first of all I would need to know where download the factory image and how can I remove the code in the flash-all.bat. If you show me where can I found that info your help will be very apreciate.
On the other hand, I still have no clear what would be the version I need. I bought the phone at the Google Store in Germany. Also, I do not really do not know what the difference between one version is and if it really is important to put the one that corresponds to you.
sgbmad said:
Thank you so much,
Well, first of all I would need to know where download the factory image and how can I remove the code in the flash-all.bat. If you show me where can I found that info your help will be very apreciate.
Click to expand...
Click to collapse
No problem. The factory image can be found here:
https://developers.google.com/android/images
Are you wanting to root? Forgive me I'm mistaken, though I sense that you are relatively new to this and so I'd suggest following the guide found here:
https://forum.xda-developers.com/t/pixel-6-pro-easy-step-by-step-unlock-root.4361847/
cd993 said:
No problem. The factory image can be found here:
https://developers.google.com/android/images
Are you wanting to root? Forgive me I'm mistaken, though I sense that you are relatively new to this and so I'd suggest following the guide found here:
https://forum.xda-developers.com/t/pixel-6-pro-easy-step-by-step-unlock-root.4361847/
Click to expand...
Click to collapse
Well, I'm not new to this really, but it is my first Pixel. Long time ago I was addicted to flash ROMs
Currently I prefer to use the phone without root.
sgbmad said:
Well, I'm not new to this really, but it is my first Pixel. Long time ago I was addicted to flash ROMs
Currently I prefer to use the phone without root.
Click to expand...
Click to collapse
Great, you'll enjoy this phone!
There's lots of how-to guides on this forum so give them all a good read to benefit your understanding on how the Pixel works and let us know if any questions
cd993 said:
Great, you'll enjoy this phone!
There's lots of how-to guides on this forum so give them all a good read to benefit your understanding on how the Pixel works and let us know if any questions
Click to expand...
Click to collapse
Thank you cd993
I didn't know the Android Flashing Tool for Chrome. There is an option to flash without wipe the device. I'll probably use this tool for flash an image.
sgbmad said:
Thank you cd993
I didn't know the Android Flashing Tool for Chrome. There is an option to flash without wipe the device. I'll probably use this tool for flash an image.
Click to expand...
Click to collapse
Yeah that's a very handy one, especially when not wanting to root.
Have fun!
cd993 said:
Yeah that's a very handy one, especially when not wanting to root.
Have fun!
Click to expand...
Click to collapse
Sure! I think I'll wait for Google says something about this:
[U: Not the wrong build] Latest Google Pixel 6 update is causing network issues in Europe
Some Pixel 6 and Pixel 6 Pro owners in Europe have found that the December update is causing various network issues on their phones.
9to5google.com
Thanks!