I installed a xiaomi.eu beta rom on my Redmi Note 5 Pro a few days back while i was using my phone before the update vibration and everything was working fine after i intalled the beta update my vibrator motor stopped responding i tried to do the kernel test there was no sucess i tried formatting the device still no effect i even installed fastboot rom global stable but still no effect. Can anyone help me reguarding this matter Thanks in advance.
Related
I ordered my Mi Max 3 from TradingShenzhen and chose the option to have them install the xiaomi.eu ROM. It arrived with TWRP installed, an unlocked bootloader, and xiaomi.eu MIUI 10 v. 8.7.26 installed. I downloaded the most recent xiaomi.eu MIUI 10 ROM (v. 8.8.23) and flashed it in TWRP.
Everything on the phone is working fine except for a persistent problem with calls. Within about 40 seconds of being in a phone call (whether on the phone or through the car's bluetooth) the party on the other side complains that my voice has suddenly changed to being very "tinny" and "robotic" and that they can't understand me. I hear them fine. At all times my signal strength is excellent. Depending on where in the city I am I may be on LTE or LTE+ with four or five bars but the problem persists.
Does this sound like a firmware issue or did I get a bad phone?
frcraig said:
I ordered my Mi Max 3 from TradingShenzhen and chose the option to have them install the xiaomi.eu ROM. It arrived with TWRP installed, an unlocked bootloader, and xiaomi.eu MIUI 10 v. 8.7.26 installed. I downloaded the most recent xiaomi.eu MIUI 10 ROM (v. 8.8.23) and flashed it in TWRP.
Everything on the phone is working fine except for a persistent problem with calls. Within about 40 seconds of being in a phone call (whether on the phone or through the car's bluetooth) the party on the other side complains that my voice has suddenly changed to being very "tinny" and "robotic" and that they can't understand me. I hear them fine. At all times my signal strength is excellent. Depending on where in the city I am I may be on LTE or LTE+ with four or five bars but the problem persists.
Does this sound like a firmware issue or did I get a bad phone?
Click to expand...
Click to collapse
Try this fix from @ice0901: Hey I fixed it. Found a post on a thread that will enable VoLTE on Xiaomi Phones. Apparently they disabled VoLTE starting with MiUi 9 due to lack of certifications in certain countries, the US being one of them. To activate it dial *#*#86583#*#*
Thank you for your note. I used the secret code and activated VoLTE, but the problem persists. I called my telecom this morning and a few seconds into the call with tech support the chap said: "your voice has become distorted - I can't hear you" and then he hung up! I was thinking about using fastboot to flash the China Stable and then reflash the xiaomi.eu to see if that clears up the problem, but I am concerned about the announcement that beginning with MIUI 10 v. 8.8.23 "anti-rollback" has been activated on the Mi Max 3 and that you will brick your device if you attempt to downgrade. I also read on the xiaomi.eu forums that xiaomi.eu "disables" the anti-rollback features of the China development ROMs they use. Any thoughts on how to proceed?
frcraig said:
Thank you for your note. I used the secret code and activated VoLTE, but the problem persists. I called my telecom this morning and a few seconds into the call with tech support the chap said: "your voice has become distorted - I can't hear you" and then he hung up! I was thinking about using fastboot to flash the China Stable and then reflash the xiaomi.eu to see if that clears up the problem, but I am concerned about the announcement that beginning with MIUI 10 v. 8.8.23 "anti-rollback" has been activated on the Mi Max 3 and that you will brick your device if you attempt to downgrade. I also read on the xiaomi.eu forums that xiaomi.eu "disables" the anti-rollback features of the China development ROMs they use. Any thoughts on how to proceed?
Click to expand...
Click to collapse
Happy to help! Sorry you're going through so much headache. I would suggest starting over as you mentioned and doing the following from @omer1919's instructions from his nitrogen rom thread:
"I suggest to start clean again by flashing 8.8.9 fastboot and then follow the full installation instructions on op post
Installation Instructions:
- Make sure your bootloader is unlocked!
- Boot to fastboot mode
- Format your data to make sure that the installation will be clear using the command: fastboot format userdata
- Flash TWRP Recovery
- Boot to TWRP recovery
- Mount all the possible partitions
- Wipe your data,cache,Internal storage,dalvik DONT WIPE SYSTEM OR YOU WILL BRICK YOUR DEVICE
- Using MTP or OTG copy the xiaomi.eu rom to your device
- Flash the Xiaomi.eu rom
- Wipe cache and dalvik
- Reboot"
Can you tell us what carrier you are using? I also bout from trading Shenzen with the xiaomi.eu rom installed and had call problems at first. First thing I did was follow the advice from this thread. Flash the chinese fastboot then flash the latest xiaomi.eu rom. Then I enable voLTE by typing *#*#86583#*#* into the browser and now my calls work great!
My carrier is Telus (Canada). I followed the advice in the thread you linked (flashed China stable, re-flashed TWRP, etc.) then flashed xiaomi.eu 8.8.23 and this time my call problems were even worse. When I went to dial anyone the phone app would simply say (failed to connect). So I then flashed xiaomi.eu 8.8.9 which other Mi Max 3 users have commented is trouble free, and so far I've been making calls for the past hour to different landlines and mobiles and no call problems. Perhaps there is a problem with 8.8.23, but it is odd that more people haven't had my problems using that version.
UPDATE:
I have now had several messages from other Mi Max 3 users that 8.8.23 caused serious call issues and that reverting to 8.8.9 fixed all their problems. I have now had two days trouble free after reverting to 8.8.9 so I will wait for other reports before considering today's release of 8.8.30 (if it isn't broken why fix it). Besides, MIUI 10 beta testing is now complete for several devices so Xiaomi has begun releasing China Stable MIUI 10 ROMs as of today. I downloaded and flashed the China Stable MIUI ROM for my Mi MIX today and it is working great (despite the odd annoying menu in Chinese). Can't wait for the developers at xiaomi.eu to release their version of the China Stable MIUI 10 ROMs. If the Mi MIX (an older device) has a China Stable MIUI 10 ROM it can't be long before our Mi Max 3s get the stable version as well.
For those of you with call problems using xiaomi.eu MIUI 10 v. 8.8.23 finally an explanation from xiaomi.eu as to the cause. Xiaomi.eu has always 'stripped' the anti-rollback feature from China developer ROMs that they translate into European languages. For the Mi Max 3, 8.8.23 was the first China ROM issued with arb, so in their release xiaomi.eu stripped this feature from the firmware of the ROM. After so many complaints they realized that beginning with 8.8.23 a new modem (required for calls) was imbedded with the anti-rollback feature of that ROM, and by stripping the arb from the firmware you wound up with a ROM that included a modem that didn't work. So on this week's release, 8.8.30, they have left the anti-rollback feature in place, thus allowing the new modem in the firmware to permit normal calls. So you basically have two choices if you stay with xiaomi.eu on this phone - stay on 8.8.9 which is stable and has no anti-rollback protection, or upgrade to 8.8.30 but thereafter brick your phone if you attempt to re-flash an older version.
...then someone try 8.8.30 ? Resolved call problem ?
Can I reverse my actual rom 8.8.23 to 8.8.9 ?
Total disappointed about mi max 3.Bought from mi global store with global rom.When receive it, the calls don't work.I was hijacked to use custom buggy software for flashing rooting and other ****s to do, if i want to use max 3 normally, because there is no official global rom.Never again xiaomi, never.......
galev_90 said:
Total disappointed about mi max 3.Bought from mi global store with global rom.When receive it, the calls don't work.I was hijacked to use custom buggy software for flashing rooting and other ****s to do, if i want to use max 3 normally, because there is no official global rom.Never again xiaomi, never.......
Click to expand...
Click to collapse
First: mi global store is not official Xiaomi store, just a chinese guy, which sell Xiaomi devices from China.
Second: they unlock bootloader unofficial, which is a big problem.
In other words, you got a chinese Mi Max 3, with unofficial unlock bootloader and fake ROM. Buy official global version and anything works perfect out of box.
Plz how can I get official global ROM for my mi max 3. I am in Nigeria and bought the unlocked global version of the phone last two months, August. I need Ur help, pls
Hi,
I have Mi A2 Lite was updated to pie with latest security patch, twrp and magisk installed and were working fine. Tried a couple of treble ROM, nothing was fully functioning. Latest Installed one was AEX which had the wifi not working at all, got desperate and flash a twrp backup of the stock but to my surprise wifi was not working still !!!
Do you guys have any idea how to solve it ... any help is greatly appreciated.
Thanks to the best community ever.
my initial rom was miui 11.0.7.0 then i flashed evo x and the fingerprint is still working, then i want back to miui 11.0.9.0 then i flashed miui 12 beta then i flashed miui 11.0.9.0 again and when i add my fingerprint it force-closes the settings, help please, thank oyou
miui 11.0.9.0 I think that's the problem, try another rom.
I strongly advice anybody to not update their redmi note 9s Curtana to the latest Xiaomi.EU version of Miui 12 based on Android 11.
I had several, quite nerve wrenching bugs even though I clean flashed.
-telephone: I could not be heard and the other side could not be heard on the phone. I guess this had something to do with root with magisk as I tried out my phone after flashing the update and it worked, but after having set up the phone with all apps and root, the said problem arose
- picture in picture mode got extremely buggy and the overlay sometimes hid the video box and made the whole screen unresponsive
- the phone feels quite slow
I downgraded to the last Miui 12 version based on Android 10 and all is fine again.
As I said if these things above are things you'd need often on your phone I'd suggest you not to update.
My phone is joyeuse global rn9pro and Im in the same boat.
How exactly did you downgrade without loss of data?
My POCO M2 Pro (6+64 GB) is still running MIUI 12.0.4.0 (QJPINXM) stable based on Android 10. It keeps saying there are no updates available but I'm pretty sure it has the requisite hardware to run Android 12, plus some sites are saying it has received the 12.5 stable based on Android 11 ROM already. I have even downloaded a MIUI 12.5 ROM (at least that's what it says) from some shady website but it keeps telling me "Update to this stable version is not allowed".
Anyone else facing the same problem? Got any solutions?
imhariiguess said:
My POCO M2 Pro (6+64 GB) is still running MIUI 12.0.4.0 (QJPINXM) stable based on Android 10. It keeps saying there are no updates available but I'm pretty sure it has the requisite hardware to run Android 12, plus some sites are saying it has received the 12.5 stable based on Android 11 ROM already. I have even downloaded a MIUI 12.5 ROM (at least that's what it says) from some shady website but it keeps telling me "Update to this stable version is not allowed".
Anyone else facing the same problem? Got any solutions?
Click to expand...
Click to collapse
Same here. I'm flashing ew software to get rid of this problem. Let's hope it work.
imhariiguess said:
My POCO M2 Pro (6+64 GB) is still running MIUI 12.0.4.0 (QJPINXM) stable based on Android 10. It keeps saying there are no updates available but I'm pretty sure it has the requisite hardware to run Android 12, plus some sites are saying it has received the 12.5 stable based on Android 11 ROM already. I have even downloaded a MIUI 12.5 ROM (at least that's what it says) from some shady website but it keeps telling me "Update to this stable version is not allowed".
Anyone else facing the same problem? Got any solutions?
Click to expand...
Click to collapse
poco m2 pro got enhanced 12.5.2.0 update but some people still haven't got it idk why and about android 12 flash any custom rom coz i am not sure when poco will decide to give android 12 or even this will get it on not by them.
_Nihal_ said:
Same here. I'm flashing ew software to get rid of this problem. Let's hope it work.
Click to expand...
Click to collapse
Let me know if it helps. Thanks.
Ezio553 said:
poco m2 pro got enhanced 12.5.2.0 update but some people still haven't got it idk why and about android 12 flash any custom rom coz i am not sure when poco will decide to give android 12 or even this will get it on not by them.
Click to expand...
Click to collapse
Ridiculous how Xiaomi ignores these phones just because "they're budget devices". The M2 has such good hardware.
imhariiguess said:
Ridiculous how Xiaomi ignores these phones just because "they're budget devices". The M2 has such good hardware.
Click to expand...
Click to collapse
Yes i agree but as usual xiaomi being xiaomi we can't expect much from them or atleast i don't expect so for me custom roms are always the best go.
imhariiguess said:
My POCO M2 Pro (6+64 GB) is still running MIUI 12.0.4.0 (QJPINXM) stable based on Android 10. It keeps saying there are no updates available but I'm pretty sure it has the requisite hardware to run Android 12, plus some sites are saying it has received the 12.5 stable based on Android 11 ROM already. I have even downloaded a MIUI 12.5 ROM (at least that's what it says) from some shady website but it keeps telling me "Update to this stable version is not allowed".
Anyone else facing the same problem? Got any solutions?
Click to expand...
Click to collapse
Same problem how can we solve this problem?
Any updates to this issue? I am also stuck with MIUI 12.0.4. Tried Resetting and reflashing stock 12.0.4 ROM. Downloaded several official ROMs that were released after aug 2021. Cannot flash any of them with the updater. Only option seems to be unlocking bootloader and trying to flash fastboot version. But I cannot unlock bootloader as my work related enterprise apps will stop working.
Has anyone been able to upgrade to Android 11 ROM on poco M2 pro?
aramosfet said:
Any updates to this issue? I am also stuck with MIUI 12.0.4. Tried Resetting and reflashing stock 12.0.4 ROM. Downloaded several official ROMs that were released after aug 2021. Cannot flash any of them with the updater. Only option seems to be unlocking bootloader and trying to flash fastboot version. But I cannot unlock bootloader as my work related enterprise apps will stop working.
Has anyone been able to upgrade to Android 11 ROM on poco M2 pro?
Click to expand...
Click to collapse
Afaik there hasn't been any official updates for the device after 12.0.4 version. I'm going to wait aa few days for the full rollout of MIUI 13 and hope that the m2 series is included
The MIUI 12.5.3 update finally showed up on the phone today. Installed it immediately. It is still in stable beta, But I got a notification as I had enabled the option to get updates early in the settings.
Installed fine and seems to be working fine. Android updated to 11. Security update till Jan2022.
aramosfet said:
The MIUI 12.5.3 update finally showed up on the phone today. Installed it immediately. It is still in stable beta, But I got a notification as I had enabled the option to get updates early in the settings.
Installed fine and seems to be working fine. Android updated to 11. Security update till Jan2022.
Click to expand...
Click to collapse
I updated same today and got stuck in bootloop didn't boot at all so had to go back to custom rom thank god that i had my bootloader unlocked.
aramosfet said:
The MIUI 12.5.3 update finally showed up on the phone today. Installed it immediately. It is still in stable beta, But I got a notification as I had enabled the option to get updates early in the settings.
Installed fine and seems to be working fine. Android updated to 11. Security update till Jan2022.
Click to expand...
Click to collapse
Bit late considering A12 has been out for 5 months now. I've already switched to a custom ROM.
Ezio553 said:
I updated same today and got stuck in bootloop didn't boot at all so had to go back to custom rom thank god that i had my bootloader unlocked.
Click to expand...
Click to collapse
What ROM are you using? I'm on dotOS and it's pretty neat but my battery's suffering a bit
imhariiguess said:
What ROM are you using? I'm on dotOS and it's pretty neat but my battery's suffering a bit
Click to expand...
Click to collapse
I am talking about Miui 12.5.3.0 official, I thought i would give it a go to see if they have improved anything but i guess i was wrong even for flashing that. Currently flashed derpfest a12 just released new build