Related
Hi all,
I am looking for a clear or white TPU case for my white Z3C. I have attempted to read the cases thread but there are over 800 posts and a lot of them seem mainly concered with magnetic charging dock compatitbility, which I don't have.
Can anyone recommend me a case please? My criteria would be:
- Clear or white, not too bulky.
- Adds a little grip
- Good protection from accidental drops - I admit I am a little clumsy with my phone at times.
- has space to put a tempered glass screen protector on the front.
- ideally needs either usb OR magnetic cut-out but not really both as I will only use one or the other. And I will buy a magnetic cable, not a dock, so it won't need to fit in one.
I have looked at the Cruzerlife bugdroid. But I just don't like the droid on the back... I would much prefer completely plain.
Any advice?
I think Ringke fusion is the one you are looking for.
Take a look at this thread http://forum.xda-developers.com/z3-compact/accessories/z3-compact-thread-t2879996 you will find many feedback for Ringke and other cases
Thanks, I will have a look at that one.
I saw the Orzly fusion - has anyone seen both the Ringke and the Orzly in real life to compare them?
I did try to read that thread, but there are over 800 posts and a huge amount of them are dedicated to whether the case will allow the phone to stilll be used in the magnetic charging dock, and not many seem to discuss how well the phone would be protected in case of a fall.
ellie3009 said:
Thanks, I will have a look at that one.
I saw the Orzly fusion - has anyone seen both the Ringke and the Orzly in real life to compare them?
I did try to read that thread, but there are over 800 posts and a huge amount of them are dedicated to whether the case will allow the phone to stilll be used in the magnetic charging dock, and not many seem to discuss how well the phone would be protected in case of a fall.
Click to expand...
Click to collapse
I have both for months. The only case I have been using is the Ringke. In my opinion it wins by a mile!
Thanks, that is helpful!
Can I ask why you think the ringke is better?
ellie3009 said:
Thanks, that is helpful!
Can I ask why you think the ringke is better?
Click to expand...
Click to collapse
In any aspect it's better.
The actual housing of the Ringke is a lot more durable.
The Ringke feels very well in hand and offers very good grip.
I dropped the phone on purpose and nothing happened and I really wasn't afraid of doing it.
Some/most complain about the Ringke floppyness of the case at the left side that blocks the flaps, I think they did that on purpose and unless you keep the phone in the case most of the times there really is no problem.
I'm using the one from Nillkin very sleek not slippery at all fits perfectly on a magnetic dock and preserve the beauty of my Z3 although there's a little brand name but you rarely notice it price around 4-5$ not bad at all for the beauty and security it can give.
And oh the cut around the USB and memory card slot are quite long perfect for the z3 dual D6633 owners.
Official Smoke Case
by OnePlus
Official Flip Case
by OnePlus
Official Clear Case
by OnePlus
InvisiCase
by Orzly
ExecArmour
by Orzly
Wallet Case
by Orzly
FlexiCase
by Orzly
FlexiSlim
by Orzly
FlexiCase Blue
by Orzly
Fusion Bumper
by Orzly
Lucion
by Tudia
Arch
by Tudia
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
I sent them an email with the same photo's, they are refunding my money. Pretty stand up.
Now I need to find a bumper.
Here you go!
I ordered orzly fusion bumper case, its on the way.
Sent from my ONE A2003 using Tapatalk
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Space saver
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
DustinDep said:
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Click to expand...
Click to collapse
Last I looked didn't that case take like 3+ weeks for delivery?
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Mersine said:
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Why don't you look at tudia or better otterbox
Sent from my SM-G900H using XDA Free mobile app
I returned the Dual Layer Defender Protective Case Cover with Kickstand because it's too bulky and really like the One Plus's translucent gray case
Mersine said:
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
cedric1918 said:
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
Click to expand...
Click to collapse
I've attached pictures of my phone and the case with my stock back cover and without (you can see my serial). It is very weird without. I can definitely feel the back as hollow and missing something. I'd advise to keep it on, it is as slim as can be. That's odd the website would say that if it fits without the back cover on.
I bought the Diztronic tpu case because I had it for the OnePlus and was very satisfied. Although it is roughly the same case as for the opo the finishing is not as good. There is a shiny edge where the camera is, which could have worked out great but just is not. The case is also not as tight as for the opo and corners will slip off the phone when getting it out of your pocket. On the other hand the case is still from a very durable shock absorbing material and the edge that stands out over the screen makes sure that the glass doesn't shatter when you drop it. The thing I like about it most is the fact that it simply makes the OnePlus look more humble. No thrills just a nice phone. All and all a good case but not as good as its predecessor.
im not happy with this at all..i have the black apricot..it is quite a bit thicker than the sandstone..im very disappointed in oneplus to sell styleswaps with different thicknesses..
I have both the orzly invisicase and fusion bumper..
with the invisicase..it loses the facedown protection..the screen comes out on top of the edges..because its too tight..the corners/edges will slipp off with a small touch..
with the fusion bumper..you clearly see it doesnt fit the contours of the device..especially at the cutouts and the top&bottom..
also the cutout for the usb port is too small for the standard oneplus cable (have to use some force) ..while its cut perfectly for the usb cables orzly is selling..
basically..these cases are only designed to use with the standard sandstone styleswap while intended for the other styleswaps..
Has anyone got the spigen rugged case?
rosswaa said:
Has anyone got the spigen rugged case?
Click to expand...
Click to collapse
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Talesofanobody said:
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Click to expand...
Click to collapse
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
rosswaa said:
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
Click to expand...
Click to collapse
Alright, thanks
Sent from my ONEPLUS A2005
I've been very happy with the case on my Nexus 6P (this looks like the one: https://www.ebay.com/i/131886281154?rt=nc&var=431231132500). Now having preordered XL2, I've been searching for similar case, but so far haven't found anything that would be close enough match. I went through the Cover thread, and closest ones were cases like this and this but there appears to be few essential differences:
The plastic bumper around looks a lot thinner on these XL2 cases
XL2 cases all have kickstand, which basically means the backside is not as thick/protective against drops
I don't need any CC slots (although having one isn't a show stopper)
Most of these XL2 cases look cheap at least in pictures
Even tried asking @madebygoogle on Twitter, but they didn't have any info on such cases. I'd happily pay that same (absurd) $50 or so for the case that I paid for this 6P case as it really is a premium case I've enjoyed using. Any tips are highly appreciated!
Try Case-mate
Sent from my Pixel 2 XL using Tapatalk
I'm in exactly the same boat...
Nexus 6p Flip case has been phenomenal and I'd like something similar for the Pixel 2 XL.
I'll try to remember to add to the thread, if I find something.
KL1 said:
I'm in exactly the same boat...
Nexus 6p Flip case has been phenomenal and I'd like something similar for the Pixel 2 XL.
I'll try to remember to add to the thread, if I find something.
Click to expand...
Click to collapse
Ditto. Does anyone know who manufactured the Nexus 6P folio?
From what I've found they were produced by adoptednyc.
They show no new items since iPhone 7.
Facebook is quiet too for them.
SOGA makes a really good flip case out of leather that works great.
Sent from my Pixel 2 XL using Tapatalk
jpalo said:
I've been very happy with the case on my Nexus 6P (this looks like the one: https://www.ebay.com/i/131886281154?rt=nc&var=431231132500). Now having preordered XL2, I've been searching for similar case, but so far haven't found anything that would be close enough match. I went through the Cover thread, and closest ones were cases like this and this but there appears to be few essential differences:
The plastic bumper around looks a lot thinner on these XL2 cases
XL2 cases all have kickstand, which basically means the backside is not as thick/protective against drops
I don't need any CC slots (although having one isn't a show stopper)
Most of these XL2 cases look cheap at least in pictures
Even tried asking @madebygoogle on Twitter, but they didn't have any info on such cases. I'd happily pay that same (absurd) $50 or so for the case that I paid for this 6P case as it really is a premium case I've enjoyed using. Any tips are highly appreciated!
Click to expand...
Click to collapse
Tetded leather cases. Very nice. Bit expensive though.
https://www.tetded.com/home/en/501-pixel-2-xl
stumpy352 said:
Tetded leather cases. Very nice. Bit expensive though.
Click to expand...
Click to collapse
I ordered 2 of these(2XL & 2).
Will report my assessment of them when they arrive.
Will likely take weeks, coming from China.
I prefer a flip case because of the added protection for the screen.
Also when I hold the phone in portrait mode I tend to use the flipped cover a secure holding grip.
The main downside is when taking a picture the cover gets in the way if I'm too hurried to get a picture.
I ordered the natural leather finished flip case without the strap or clasps from Tedded.
Looks to be of nice quality whereas it's real leather and not the plastic leather most cases use.
Where do the plastics cows come from? Do you feed them plastic packing peanuts?
kdkinc said:
I prefer a flip case because of the added protection for the screen.
Also when I hold the phone in portrait mode I tend to use the flipped cover a secure holding grip.
The main downside is when taking a picture the cover gets in the way if I'm too hurried to get a picture.
I ordered the natural leather finished flip case without the strap or clasps from Tedded.
Looks to be of nice quality whereas it's real leather and not the plastic leather most cases use.
Where do the plastics cows come from? Do you feed them plastic packing peanuts?
Click to expand...
Click to collapse
[email protected] peanuts
Sent from my Pixel 2 XL
KL1 said:
I ordered 2 of these(2XL & 2).
Will report my assessment of them when they arrive.
Will likely take weeks, coming from China.
Click to expand...
Click to collapse
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
Awesome, thanks for the review! Do you have any photos you can share? Also, where did you order them from? Thanks!
dancole42 said:
Awesome, thanks for the review! Do you have any photos you can share? Also, where did you order them from? Thanks!
Click to expand...
Click to collapse
Ordered straight from tetded.com
The photos on the site are spot on.
I got the case without a strap or clasp.
Case mate has their leather folio case up for sale now.
Had one for my Pixel XL, loved it!
Can't wait to get this one!
Sent from my Pixel 2 XL
TETDED
Just received my flip case from Tetded.
If you desire a case that wasn't made from last months recycled Coke or Pepsi bottle this is the one to purchase.
I bought the flip case without the latch, the classic vintage brown version. It has the feel of fine leather, not something made from camel scrotum. The cover does interact with the screen as it should.
Access to the side buttons is good the fingerprint sensor is recessed a bit but access is also good.
The only downside at the moment is I use a magnetic phone holder in my vehicle that requires a very thin steel plate be applied to the inside of the front cover I usually use a credit card slot of which there are none. Tomorrows project.
the case is pricey but so wasn't the phone now to find a glass screen protector that doesn't have issues.
Don't ask for "pics" friggen Google Tetded.
KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
Thanks for pointing out the Tetded cases. I looked and found they are now being sold on Amazon. Mine arrived today. Happy with it.
KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
I know this is an old thread, but I'm in the same boat. One question for anyone that has the TetDed folio case. 1) How's it holding up a few months down the road? and 2) does the cover hold shut via magnet? Or is it just floppy? Thanks in advance to anyone still monitoring this.
mardanny said:
I know this is an old thread, but I'm in the same boat. One question for anyone that has the TetDed folio case. 1) How's it holding up a few months down the road? and 2) does the cover hold shut via magnet? Or is it just floppy? Thanks in advance to anyone still monitoring this.
Click to expand...
Click to collapse
Mine is holding up great, but I'm the type that doesn't have the cover open a lot.
My wife's is not holding up as well cause she is constantly on the phone.
The wear & tear that bothers me about hers is that the cover doesn't rest properly when closed now. it wants to sit crooked by default, resulting in me having to adjust it whenever I see it.
Overall, I think they are still a good option for folio covers, just not nearly as perfect as the Nexus 6p cover.
thanks for taking a chance and for reviewing the leather case.
kdkinc said:
now to find a glass screen protector that doesn't have issues.
Click to expand...
Click to collapse
can you recommend one of these? just received my xl2 last week. (i shattered my oneplus3 2 weeks after receiving it, so i'm trying to be proactive
Hey guys,
sharing this.
Ordered a case from Incipio. Not sure if the clear or smoke was the better choice, but ended up getting the smoke:
https://www.incipio.com/cases/smart...11-plus-cases/ngp-pure-htc-u11-plus-case.html
Its marked down today too if you guys want to grab
https://photos.app.goo.gl/OZ1OADdMacbDAjap1
https://photos.app.goo.gl/HGlnH2YUHRPpbk0g1
https://photos.app.goo.gl/sgOojfvPwuJtjuGs1
Thanks for sharing photos of your plastic case with us.
Which one is the best leather case for the U11+ ?
lebigmac said:
Thanks for sharing photos of your plastic case with us.
Which one is the best leather case for the U11+ ?
Click to expand...
Click to collapse
I'm after leather case as well and this is what I found so far https://www.ebay.com.au/itm/For-HTC...se-/391927659984?_trksid=p2385738.m2548.l4275
sephstyler said:
Hey guys,
sharing this.
Ordered a case from Incipio. Not sure if the clear or smoke was the better choice, but ended up getting the smoke:
https://www.incipio.com/cases/smart...11-plus-cases/ngp-pure-htc-u11-plus-case.html
Its marked down today too if you guys want to grab
https://photos.app.goo.gl/OZ1OADdMacbDAjap1
https://photos.app.goo.gl/HGlnH2YUHRPpbk0g1
https://photos.app.goo.gl/sgOojfvPwuJtjuGs1
Click to expand...
Click to collapse
Hi just wondering is there any rainbow or watermark effect on the back where the case touches the back glass? Does the case have a micro dot pattern inside?
Got the incipio case, no rainbow effect on the back, there is a dot pattern to prevent that, also cut outs are very precise. I tried a couple of transparent flexible cases, this is the best one so far...
sephstyler said:
Hey guys,
sharing this.
Ordered a case from Incipio. Not sure if the clear or smoke was the better choice, but ended up getting the smoke:
https://www.incipio.com/cases/smart...11-plus-cases/ngp-pure-htc-u11-plus-case.html
Its marked down today too if you guys want to grab
https://photos.app.goo.gl/OZ1OADdMacbDAjap1
https://photos.app.goo.gl/HGlnH2YUHRPpbk0g1
https://photos.app.goo.gl/sgOojfvPwuJtjuGs1
Click to expand...
Click to collapse
Is there transparent silicone case because I want to show off the back of my Translucent Black .
Are the edges of your case slightly higher than screen to prevent display?
I ordered this one.
https://www.amazon.com/Love-Ying-Anti-Scratches-Protective-Plus-Clear/dp/B076M5WWPR
does edge sense still work with this case?
YorbenB said:
does edge sense still work with this case?
Click to expand...
Click to collapse
Yes it does.
However I do feel like you might have to squeeze a little harder than normal, but then again that's what being able to adjust the sensitivity is for
Hello all, was looking for a case that holds 4 cards.i don't really like having the cover and want something more on the backside. I previously had a note 8 and used a blackweb case with card holder and liked that a lot. Anyone have anything like this or aware of one along this? Thank you a bunch for the help!
Stunna4life888 said:
Hello all, was looking for a case that holds 4 cards.i don't really like having the cover and want something more on the backside. I previously had a note 8 and used a blackweb case with card holder and liked that a lot. Anyone have anything like this or aware of one along this? Thank you a bunch for the help!
Click to expand...
Click to collapse
https://ghostek.com/galaxy-note-10-...MIs-fonInD5AIV0ZFbCh0Z7gzgEAQYBiABEgIqy_D_BwE
As for Note cases... on my Note 8 I had a rear wrap from slickwraps and a Rhinoshield Crash Guard Bumper and no screen protector.
I dropped that thing some many times i couldn't count. Plenty outside and on concrete. NEVER had an issue.
I ordered the same for the Note 10+. This scheme adds no extra thickness to the phone. The crash guard has edges front and rear that never let the glass touch a surface. The wrap provides cosmetic protection against scratches and provides some texture for a better grip.
The Rhinoshield is also mil spec rated to protect against an 11 foot fall.
Received the wraps, still waiting for the bumper.
Shad0wsabr3 said:
https://ghostek.com/galaxy-note-10-...MIs-fonInD5AIV0ZFbCh0Z7gzgEAQYBiABEgIqy_D_BwE
Click to expand...
Click to collapse
I went head and got this one, hoping it works out well. Only wish for a transparent one to keep the Agua glow showing!
Ghostek makes great cases, although I use their Covert case as my daily driver on my Note phones for the last 3 years. The one linked above should do you well OP.
Stunna4life888 said:
I went head and got this one, hoping it works out well. Only wish for a transparent one to keep the Agua glow showing!
Click to expand...
Click to collapse
Hope it works out for you too! Me personally am not a fan of cases that hold credit cards. But they are definitely useful for those that do use em'.
I totally forget which ghostek case I use to have as since the note 8 Iv been using UAG cases.
Let us know how your case works out for you!