Related
I have a problem that more people seem to have, according to the search. I couldn’t find the “audio” tab in my Bluetooth-settings, so that didn’t help me.
The problem is as follows. After 1 day the sound on my compact III mutes, including vibration. Sometimes it's after 12 hours, sometimes after 2 days, there's no distinct pattern to be recognized. Also, it doesn't seem to matter if you use the phone or not, since it sometimes is alright at night and the sound is muted the next morning. This is for all sound-events (warnings, incoming call notifications, messages, mp3 etc), however, you can make a call without any problems and hear what the other person is saying. Once you’ve hard-reset the device everything is back to normal.
It does get annoying however, since I regularly miss calls due to this bug.
I had the same problem on my Vario in the past. So I’m guessing it’s somewhere in the software I use, but apart from Total Commander and TomTom6 I haven’t installed any third-party apps.
Yup i've been having a slight problem with the sound. I thought it was like the endless knackered M500's that orange used to send me which had speaker failure after about 10minuites! (Swear they kept sending me the same 2 faulty phones - I had 5 in 5 days once!) But a play in the bluetooth seems to get it working again.
The other annoying thing is that if you leave the power management at the default settings then occasionally the screen blanks without being able to get the backlight on again - so now I have to manually turn of the screen. Stil aint much of a problem - ive had a normal days use, 2 hours of radio play, bluetooth and wi-fi on all day and still have 35% battery - wehay!
Hopefully there'll be a patch soon to sort out he glitches.
I forgot to mention I had the exact same problem on my mda Vario also. I always thought it was a problem with that specific piece, but apparantly not.
Could it be the vibrate.cab that I'm using to produce vibrations when you use the phonepad? Or should I really do some further research in the bluetooth-department?
Same problem here.
Phone becomes completely silent after 9 hours in standby mode.
I need to reset it to get back sound
Does someone know what is going on here ?
Please advise. Thank you.
I seem to experience no problems the past couple of days (fingers crossed). I used the 'speed up your WM5' tweak where you set the Glyphcache to 32768. After I reduced it to 16something the problems seem to have disappeared.
I noticed that this problem happens when for example email is automatically checked during night. If email comes in (and is not read immediately) the phone will start notifying in background.
Notifications are kept and only a program like "check notifications" will delete them manually. But still if you delete them, the phone then needs a reset
to work properly again.
This is not a memory issue, it has to do with the notifications.
I do not know how to solve it.
Hello all,
Recently got my Tp2 and loving it. Initially I got a like new Tilt2 and Hard-SPL and installed latest radio and custom ROM. All is well since then. The problem then arised when I'm incall, suddenly the other party can't hear me and I can hear them perfectly clear. Signal bar shows full 3G signal. I have to end the call and call again. This problem happens everyday and there's no fixed time pattern.
So I thought i got a defective phone from the seller, I sold it and got a new one. It had the AT&T stock rom and stuff on it. I hard-SPL and Security unlocked the phone. All was fine for a day or so leading me to believe my first handset was defective. But to my dismay, my current phone started to exhibit the same characteristics again and I was shocked.
I tried various ROM's even the stock one and different Radio builds still no luck. I'm stumped as I canot believe I received two devices with same problem? It can't be software as no matter which Chef rom i try, the other party suddenly stops hearing me ( sometimes my voice goes very low and then dies out). Here's a key thing I have to do for it to get temp. fixed. I have to blow hard at the microphone and then the opposite party can hear me crystal clear.
I have tried disabling 3G and roaming on Edge, I have tried different locations of my city thinking its related to cell tower, No luck
I am out of ideas and can't figure whats going on. What I can conclude is, during the call, something times out and goes to "sleep" and when i blow hard to the mic, it awakes the mic input. Just talking hard to the mic won't work either...has to be blown hard. My dad say's before he stops hearing me, he hears some "tuck-tuck" sound as if i am brushing the phone against some surface or sometimes he hears the sound as if I just dropped the phone, followed by dead silence on his end untill I blow through the mic. In both instances, i am just casually sitting on the coach.
At this moment I'm dumbfounded and think I'm cursed by HTC lol
I would appreciate any help from this community!
Thanks!
You could try toggling the "Auto Volume Control" setting.
It's under Settings Tab > All Settings > System > Auto Volume Control
Thanks, I will try that..Altough when i checked that, it's usually disabled by default in most Rom's
swatcho said:
Thanks, I will try that..Altough when i checked that, it's usually disabled by default in most Rom's
Click to expand...
Click to collapse
Yeah it's a bit of a long shot. The only source I can cite is a review at WMExperts for the Telus Touch Pro 2:
When holding the phone up to my ear to talk, some callers did note that I sounded far away until I enabled the Auto Volume Control in the phone settings.
Click to expand...
Click to collapse
Source: http://www.wmexperts.com/review-telus-touch-pro-2
Good luck!
Alright, I've spent all day searching and can't find a clear answer for what I'm looking for.
Just last night my keyboard and lock sounds are very quiet, now I've seen others with this issue, but I haven't seen anyone explain why this happens or how to fix it.
So does anyone know how to fix this, or have I missed it in my searching?
lolwut. Are you talking about the audio output from the keyboarD? Like when you type it makes that noise, and now that noise is quiet? I think its tied into your general phone sound level. Check your settings under menu-settings-language & keyboard-touch input
Yea, all sound levels are at max and the other sounds ( ringer, text, emails, ect...) still play at proper level. But the keyboard clicks when typing and the screen lock/unlock sound is still there, but just barely making any noise
nobody's got anything?
also last night to took my friend's evo and his is doing the same thing, he said he noticed it soon after the 3.70 update
This just happened to me. I fixed it with a hard reset of the phone. I had to reload the few apps I had and sync my google calendar and contacts. Back in business. Have no idea why it happened in the first place, but they are working now.
i have to say, i never really liked the hard reset idea so i never did it. today i let the battery run until it shut off the phone, i then pulled the battery, put it back in and then charged it full before turning the phone back on. and now my clicks have returned
I have been experiencing this problem with making some phone calls where it connects to the line I am calling, but it goes silent. They can hear me, but I can't hear them. I have found that it usually depends on who you are calling. I just did a test with a friend's cell phone and a land line. I called the land line 10 times in a row and there is never a problem. But when calling my friend's cell phone, it is random. Would go silent the first time, then be ok the next 2 times, then silent again, and so forth. Also, my friend's cell phone is set so that it only rings one time, and then the voice mail picks up. I know this from looking at the top right of the phone screen where it says "Dialing", and when the call connects, you will see a time counter. When the time counter is running, it is still silent.
I wiped the phone app cache and system caches, but the problem still occurs.
Any ideas why this is happening?
This has been annoying since I got the phone 7 months ago.
It doesn't turn off the screen when I take/make a call. I'm constantly putting my caller on hold or even hanging up with my ear or cheek. I've Googled the crap out of this and I've found MANY different settings to check/change - NONE of which exist on this phone.
So does anyone know? Is this simply not a feature of this phone?
Thank you.
bcsteeve said:
This has been annoying since I got the phone 7 months ago.
It doesn't turn off the screen when I take/make a call. I'm constantly putting my caller on hold or even hanging up with my ear or cheek. I've Googled the crap out of this and I've found MANY different settings to check/change - NONE of which exist on this phone.
Click to expand...
Click to collapse
I thought it was just me! I haven't looked for a solution as yet, but if you find one please post back here and share.
Actually I did resolve it finally! I installed a different dialer app and it worked with it. I hated the app though, so I uninstalled it. Before I had a chance to find a different app, a call came in (using the default app again) and it worked as it should. I can't explain why, but for me... installing a different app and then removing it got the default dialer to behave correctly.
Now that it works "correctly", I have noticed a quirk with it. I have to wait for an outgoing call to actually be ringing (which can take some time with some calls) before I put it up to my ear or the screen won't shut off until I bring the phone down and then back up. Now, it is *possible* that this was always the issue and I just never figured it out. So maybe the whole app install/uninstall thing is unnecessary. Not sure.
bcsteeve said:
Actually I did resolve it finally! I installed a different dialer app and it worked with it. I hated the app though, so I uninstalled it. Before I had a chance to find a different app, a call came in (using the default app again) and it worked as it should. I can't explain why, but for me... installing a different app and then removing it got the default dialer to behave correctly.
Now that it works "correctly", I have noticed a quirk with it. I have to wait for an outgoing call to actually be ringing (which can take some time with some calls) before I put it up to my ear or the screen won't shut off until I bring the phone down and then back up. Now, it is *possible* that this was always the issue and I just never figured it out. So maybe the whole app install/uninstall thing is unnecessary. Not sure.
Click to expand...
Click to collapse
I had a same problem too, but did resolved after factory reset. But I don't know where is the problem located, maybe the proximity sensor is very sensitive even with dust.
Sorry, bad English.
Your English is fine
I think you might be right, because my problem now seems to come and go. The screen definitely shuts off, but there's some times when my face will put the call on mute or other strangeness. I've even accidentally sent an email to my Mom, all with my cheek while on the phone with someone else! I had to click the back button 6 or 7 times to get back to the phone screen.
This phone was good value, but I do regret the purchase.
The proximity sensor is very sensitive, even with a very small string. I just test this when I call my second phone. And moving around my finger, and boom! My screen is turned off, but did turned on again after I moving away my finger. This is surprising me when I call my mom, and I force to turn off my device, and it's rebooted. After my device is successfully booted, I tried to call my Dad, and surprisingly the screen is not turned off. So I'll try to find the problem, and I founded them:
The proximity sensor is very sensitive, so be sure to wipe the proximity sensor until it gets clean completely.
That's it, so no matter if you use a different dialer or default dialer for your device, just keep in mind that I mentioned there.
Thank you. As always, sorry for my bad English.?