i'm having troubles with my subwoofer on px5 wondefoo headunit . im having problems only in my sub ( tow front speaker are operating fine )
In some cases the subwoofer just dont signals from the hu and the only thing that makes it come back is to unplug the main radio fuse ( in the car ) wait few seconds and plug in back. ( Then start the car ) .
Sorry about my poor English im working on it (;
Someone is familiar with this problem? Know how to solve it?
Thanks !
omerle123 said:
i'm having troubles with my subwoofer on px5 wondefoo headunit . im having problems only in my sub ( tow front speaker are operating fine )
In some cases the subwoofer just dont signals from the hu and the only thing that makes it come back is to unplug the main radio fuse ( in the car ) wait few seconds and plug in back. ( Then start the car ) .
Sorry about my poor English im working on it (;
Someone is familiar with this problem? Know how to solve it?
Thanks !
Click to expand...
Click to collapse
I have the same problem with this radio (px5 wondefoo). Did you found solution?
Related
Hi to All.
I'm a newbie on this forum , ( i'm here from 2010 as a samsung galaxy s plus user but i never posted anything, just some like and thx ) and on XDA here I've solved( always thx to some1) all the problems that I had. Some Month ago my samsung galaxy s plus has decided to say "goodbye ". I bought a fabolous zenfone 2 ze550Ml , and for first day i was really happy of my new smartphone. After some week i was at a party , and my housemate bought a new 2.1 speakers. To try our new toy , i connected my aux through the 3.5 mm aux cable that come from the speakers. Here is my problem started : from the speakers the music was low and disturbed but the phone was ok ,i 've just taken a look at the speakers's input/output connector... and.. my house mate with his ignorance on evreything about electronicsjust connected 1 input on 1 output connector and viceversa. From that day evreything that i connect on my 3.5 aux connector dosn't work good and the music/audio is low and disturbed ( some time i can hear just the right headphone ). I'm sure that i'v burned some channel audio , but i'm not so good on electronic circuits & Co. I am here to seek help, all kinds of help, if u think to know how i can fix it you are welcome :laugh::laugh:
Thank you in advance!
and and sorry for my bad English
,
How does it sound. Does it work good with stock speaker and does it handle pioneer or any brand speaker (up to 4) cause i can only amplifie my subwoofer in the back since the speakers are in the doors...
And i need a new radio. But i would like th have decend sound. At least that it will handle loud sound (without basse cause my subwoofer will do that)
And does anyone know if the screen can be tilted a bit? I use a mercedes w203 c180 and the dash is not flat it goes up so radio with a flip screen are aiming at my roof...
Anyway i migh br interested in one now that u can eq the sub..
And does it have 1 sub out at 2 rca speaker out or just 1 sub 1 pair of speaker (rca cable i mean).
(i mean 1 sub an 1 speaker rca are good but maybe i wanna amp my front speaker one day)
And how is the touch screen?
How about this new Pumpkin android 6.0 radio https://www.amazon.com/dp/B06Y5TLHJ2
alvinjones377 said:
How about this new Pumpkin android 6.0 radio https://www.amazon.com/dp/B06Y5TLHJ2
Click to expand...
Click to collapse
That price doh and its usa Amazon.
Hi.
I recently bought an MTCE PX5 based head unit for my french Peugeot 308 (2009).
The manufacturer seems to be Klyde as the version number (MTCE_KLD_V2.88b_1) says.
The installation in the car was pretty easy and plug & play thanks to your help on the main PX5 thread.
Still I have a few questions that you might have answers for
First, the head unit sounds pretty crappy.
My previous Parrot Aseroid Smart (slowish Android 2.3 / 512 MB) had a way much better sound output quality.
I will try to flash one of Cs-x's sound patchs, see if it goes better with that update.
The main problem comes from a lot of noises I get from the head unit "gzzzz" "pshhhh", it reminds me of the good old times with the computers ****ty front panel audio
When I call someone, they barelly hear me. Have you guys been experiencing such noises ?
--> Fixed by flashing one of Cs-x's patched firmwares
Then there are my rear sensors.
They are successfully detected and provided to the head unit by the CANBUS decoder provided by the seller, but they don't beep !
The seller didn't provide the amplified external speaker needed so I must do it the DIY way...
I managed to solder RCA connectors to that audio signal and I can hear the beeps when I switch for AV1 on the unit : good... but my back camera is connected to the CAM1 input wich is automatically displayed when I engage the reverse gear.
Is there a way to ask my head unit to switch to AV1 instead of CAM input when I engage reverse ?
That would be perfect as I will get the video from the back camera AND the audio from the sensors !
An other issue : my car's service counter is going crazy !
As I drove a few meters, the service counter droped near a thousand kilometers since next service.
This will result in service light flashing in a few days, for at least 12 month until my next real service :
Any idea ?
Thanks in advance for your help.
Damien
Ok guys, I managed to fix my first issue simplt by flashing one of those Cs-x sound patched firmwares !
Thanks for that !
Any advice for getting sound & video for ma rear sensors & camera ?
Bump, any idea ?
I got an other big issue with my canbus decoder...
See first post (photos), my service odometer seems to freak out a bit
Interesting as I just looked at this company for one for my Mazda CX7..
Just sent them an email on it..
Want the 4meg 32g version..
Seems also while they work with the Bose system already the reverse cam that comes with the car may not work.. need to confirm..
Hi Dgcruzing
Did you have any response from Belsee ?
Usually they answer within 2 days.
Yes, they popped back an answer.
But ended up going with a Dasaita.
Seems plenty of resellers of thier unit across the usual channels.. so with luck it all goes to plan..
Rear sensors
I have a Peugeot 208 and Dasaita unit, so slightly different and this may not help. But I had issues with reverse sensors and did not realise I had to install the supplied speaker. The beeps from the reverse sensors do not come out of the main speakers in the car, only the extra speaker provided.
Thanks Downerhouse for your message.
Indeed, my unit has this connector too, but there was no speaker in shipped the box
I tried many speakers and piezzo buzzers, but none of them worked.
I managed to attach a RCA connector to this output so I could at least plug the rear sensors sound output into my AUX input... but that's really not practical...
Bump
New ideas.
I read in a french forum that I could easily modify the car's ECU so the rear parking sensors output directly through the cars COM2000 (that's the direction switch, behind the steering wheel) instead of the classical audio circuit. I will check this.
Hello,
First of all sorry for my bad english.
3 years ago i bought this very head unit https://www.amazon.fr/Wekuo-Android-8-0-Lecteur-2015-2016-2017-Autoradio-Bluetooth/dp/B07GH48P59
It's running latest Hal9K Android 9 version.
Since one year back i started using less times my car but i noticed that after a while of driving the speaker would sound weirdly, some coil whine out of the speakers directly, but i never try to solve the problem...
Some months ago i could only start the car, drive 5minand then a very very lound noise from the speakers...
I changed all 4 speakers to brand new Focal.
What is the problem ?? Actually i was testing everything out of the car using a PSU , even changed the thermal compound and add computer fan to my HU...
At first i wasn't able to start the UH with PSU, then i find out because CANBUS i had to hotwire the ACC wire so the HU will start, and it did...
It runs cold as winter..... (which is perfect, and even pluged some speakers and sound is perfect)
but when i plug it back to the car it gets hot even if nothing is being used... and i mean i only plugged it to car power, even speakers were not connected..
Car battery is brand new, same as the one before, (fiat original parts), car alternator is working fine, also the problem is present with engine off or on.
I really thing this is CANBUS related, but from where ? from the can bus little red box adapter ? something else from the car itself ? ? actually this is my second HU on this car, and the old one i was able to start it with PSU without bypass ACC from CANBUS
It's a Fiat Tipo from 2016, it's original radio was the uconnect 5. Should i try to connect everything together and perform a new proxy alignment using fiat multiecuscan ?
I am getting very angry because this situation, i hate driving and not having music lol
If i can't to anything i thing i will erase the canbus from the HU and just use ACC, but i will lose canbus and steering wheel buttons as well..
PS: i sent message to the HU seller (i don't expect any answer after 3 years) because 2 years ago i chose bad MCU file and had some problems but after hal9K helped me finding the original one (i think) but i had a few bugs at the time i don't remember now, but i don't think this is the problem but if ' could find the original file i could do that aswell..
And actually i want to update to android 10 from hal9K.. but first i need to solve this problem.
Someone already had this king of problem ??
Thank you in advance.
Hello folks,
I have a PX6 unit with Android 10 in a VW T5 Multivan, 2007.
Everything except the FM radio worked fine for a few months (very bad reception) but I was happy because I only use navigation and sound over bluetooth from my phone.
One day I got some noice from the speakers as a small warning before a big BOOOM a few seconds later. It is a really loud "discharge" from the speakers and obviously not good for the unit. Feels like a mini thunderstorm inside my car The head unit goes back to normal after the big bang but the noice starts building up again and a few minutes later, the same thing.
After the third BOOOM the amplifier broke and I could no longer hear any sound from apps and bluetooth (FM radio was still working)
I contacted the seller and he sent me a new amplifier. Hard work for me, but I desoldered the old one and replaced it. It worked and I was back to normal for a while.
Today, the big BOOOOM was back.
Any idea what can cause this behavior and how to solve it before I burn my second amp?
TIA,
David
Is it an MTCD device
marchnz said:
Is it an MTCD device
Click to expand...
Click to collapse
Ooops. I remember incorrectly after I double checked. It is an MTCE unit. Which forum is the best for my question?
duelago said:
Ooops. I remember incorrectly after I double checked. It is an MTCE unit. Which forum is the best for my question?
Click to expand...
Click to collapse
You're in the correct forum.
Check speakers / wiring and speaker impedance. If unsure seek advice from reputable local installer