good friends after an update my google pixel stays in boot loop I have tried several ways to unlock the bootloader to install a stock rom from flashboot but every time i try to unlock the bootloader it tells me that i have to activate or unlock the oem option
I tried to do it with the adb flashtool but it gives me error
c:\adb>fastboot oem unlock
FAILED <remote: oem unlock is not allowed>
finished. total time: 0.044s
c:\adb>
I can not enter the Android system either from my Google Pixel since it is damaged the same to activate the option of OEM
I need someone to help me with this problem because the phone does not let me do anything for the fastboot because the bootloader and the OEM are blocked
Related
Days past I successfully unlocked the bootloader on my girlfriend's Taimen handset, flashed TWRP etc etc. No hitches whatsoever. I bought another for myself via the Google Store.
I booted it up today. As was on hers, OEM Unlock is prevented until I allow the handset to update to 8.1.
Done. OEM unlock then accessible and enabled.
I used my girlfriend's same PC with the same Minimal ADB and Fastboot, rebooted to fastboot and execute
Code:
fastboot flashing unlock_critical
Are you sure? ...volume up/down and power button to commit. Done. The unlock appeared successful as it rebooted to the out of box setup routine again.
I transferred the TWRP zip to the handset and rebooted to fastboot. Upon executing the command to temp boot TWRP from the IMG file fastboot
Code:
boot path "C:\Program Files (x86)\Minimal ADB and Fastboot\twrp-3.2.1-2-taimen.img"
I got the following response...
Code:
downloading 'boot.img'...
OKAY [ 0.870s]
booting...
FAILED (remote: Can not boot in Lock State)
finished. total time: 0.873s
Sure enough I look down at the handset and the fastboot menu reflects it's locked again. Weird.
I reboot and check OEM unlock. It reflects OEM unlock still toggled on. I go back to fastboot and again execute
Code:
fastboot flashing unlock_critical
Code:
FAILED (remote: Device already : unlocked!)
finished. total time: 0.002s
This is despite fastboot clearly showing "device state - locked"
I regress to dev options and toggle OEM unlock off. Reboot. Toggle OEM Unlock back on.
Same ill behavior.
Am I missing something??
try fastboot flashing unlock
depending on bootloader version you no longer need to fastboot flashing unlock_critical
see here.
@uicnren You a gentlemen and a scholar. Simple as that. Thanks.
Pay_It_Forward_Pete said:
@uicnren You a gentlemen and a scholar. Simple as that. Thanks.
Click to expand...
Click to collapse
:good:
Hey guys, i have to send my Pixel C to repair so i want to lock my bootloader. My Problem is, that i cant enable OEM unlocking in the developer options because its grayed out saying that my bootloader is already unlocked. "fastboot flashing lock" and "fastboot oem lock" both give me the error "FAILED (remote: Enable OEM unlock is not set)".
Is there a workaround for this?
Thanks for your help!
I also have this issue.
Same thing here. I loaded LineageOS and have decided to go back to factory. I can't figure it out either. Here are my results.
fastboot flashing lock
FAILED (remote: Enable OEM unlock is not set)
finished. total time: 0.022s
fastboot flashing unlock
FAILED (remote: Device already unlocked)
finished. total time: 0.003s
fastboot flashing get_unlock_ability
(bootloader) 0
OKAY [ 0.020s]
finished. total time: 0.020s
Ok all, I finally figured it out.
I had to download factory image 6.0.1 (MXB48J) go thru the instructions to flash this image.
Started up in android went thru the min setup to get into Settings and Developer Options. Turn on USB debugging and the OEM Unocking.
adb reboot bootloader
flashboot flashing lock
Prompted me about wiping the device.
Everything is good.
Hi, I need some help with unlocking the bootloader of my phone [Huawei Y5 (DRA-LX3)] Please!
So, I am using the adb7fastboot method to unlock the bootloader, there are very limited options to do this process, but I've managed to find what might be the unlocker code for the command:
Code:
fastboot oem unlock xxxxxxxxxx (the unlock code)
Naturally, the warning screen appears on my phone (the one that tells you about erasing all of the data by unlocking the phone), and when I select "Yes" the phone displays an error:
unlock failed... return to fastboot in 3s
And the adb/fastboot window goes something like this:
Code:
...
(bootloader) Start unlock flow
FAILED (remote:
Unlock failed - Err:0x7
)
finished. total time: 6.137s
What do you think? Is there a solution that can save my life? Thanks by the way!
Hi there,
I try to install lineageos on my xperia xz2 compact but i dont manage to get the bootloader unlocked.
The rooting status says : Bootloader unlock allowed: Yes. so i thought it should be fine but in fastboot mode the command
Code:
fastboot oem unlock <unlockcode>
gives me:
Code:
...
FAILED (remote: Command not allowed)
finished. total time: 0.069s
I tried with flashtool (found this in some forums) but i get some error as well. Even though i am not sure to use this program properly and I also got some
"No device is registered in Flashtool. You can only flash devices."
error message there.
any ideas?
problem solved, I didn't know that I would have to enable "oem unlock" in the device's developper options. what a fail..
Hello, I am trying to unlock the bootloader of my moto g60 but I have a problem to get the bootloader data with the fastboot oem get_unlock_data command, every time I try it returns the following error
c:\platform-tools>fastboot oem get_unlock_data (bootloader) Failed to get unlock data. OK [0.008s] Finished. Total time: 0.008s
I have tried to restore the firmware with RSA, but it is still the same no matter how many times I try, I always get the same error, if anyone knows of a solution, or has had the same problem and has solved it, please explain to me what I can do.