1 make sure bootloader is unlocked if not go to settings, about phone, tap build 5 times, go back to main settings page, go to developer settings and enable USB debugging and OEM/bootloader unlocking turn off phone and Hold vol down and bixby and plug in phone to computer to put it in download mode follow what it says to go to unlock boot loader, then unlock it and reboot then check if unlocked by going to settings, developer, and see if the OEM lock is greyed out or still checked if so your good.
2 if it's unlocked do a factory reset
3 Set up phone and skip everything
4 Turn developer mode on and enable USB debugging
5 make sure you have latest firmware so you can extract that AP file
6 Install magisk manager if you dont have it
7 Use magisk to patch AP file by hitting install as if you were going to install it then got to patch file and select AP file and it will start patching and create an file in your download folder
8 Take the new file and copy it to your computer
9 Install odin if you haven't
10 Put the new file in the AP slot in odin and uncheck auto reboot and everything else
11 Turn off phone
12 Hold vol down and bixby and plug in phone to computer to put it in download mode
13 Flash the AP file with odin
14 Once done flashing hold power and vol down till it turns off then quickly hold vol up with power and Bixby to boot to recovery
15 Wipe data and factory reset
16 Then select power off
17 Then like you were going to boot into recovery hold vol up with Bixby and power but once you see the 1st warning screen come back let the buttons go
18 It should boot up you phone like normal but now you have root
19 Now download the TWRP app, find your phone model and download the img file but don't flash it yet
20 Now open magisk and patch the file you just downloaded
21 Now you can flash the file that was just created with the TWRP app
22 You should have TWRP recovery now but to check turn off the phone and boot to recovery with the Bixby, vol up and power buttons then once you are done confirming go to reboot and select power off then boot the phone by holding the buttons like you would to get to recovery but only till the first warning screen comes back then let them go and it should boot back rooted like before
23 If you have any problems try to reboot as I just explained again and if that still doesn't work the device may have encrypted it self so you will have to boot back to recovery and select wipe, format data, type in yes and confirm then go back to wipe option and select factory reset then go to reboot, power off, and hold buttons like booting to recovery then let go when the first warning screen comes back
24 You will need to setup you device again but its unencrypted now...enjoy!!!
Just remember to boot your phone with vol up, Bixby, and power till the first warning screen comes back EVERYTIME!!! If you are in recovery power off then then hold the buttons. If you just power on by holding power you might lose root.
Also if you think that You Bricked your device Because something just seems totally wrong Hold down the Bixby button and volume down plugin cable to you computer and other end into your phone and it should go into download mode then you can re Flash the stock firmware using odin and if you like to redo all these steps all over again but make sure you don't Miss a step and do it verbatim
81! said:
1 make sure bootloader is unlocked
2 if it's not unlocked do a factory reset
3 Set up phone and skip everything
4 Turn developer mode on
5 make sure you have latest firmware so you can extract that AP file
6 Install magisk manager if you dont have it
7 Use magisk to patch AP file by hitting install as if you were going to install it then got to patch file and select AP file and it will start patching and create an file in your download folder
8 Take the new file and copy it to your computer
9 Install odin if you haven't
10 Put the new file in the AP slot in odin and uncheck auto reboot and everything else
11 Turn off phone
12 Hold vol down and bixby and plug in phone to computer to put it in download mode
13 Flash the AP file with odin
14 Once done flashing hold power and vol down till it turns off then quickly hold vol up with power and Bixby to boot to recovery
15 Wipe data and factory reset
16 Then select power off
17 Then like you were going to boot into recovery hold vol up with Bixby and power but once you see the 1st warning screen come back let the buttons go
18 It should boot up you phone like normal but now you have root
19 Now download the TWRP app, find your phone model and download the img file but don't flash it yet
20 Now open magisk and patch the file you just downloaded
21 Now you can flash the file that was just created with the TWRP app
22 You should have TWRP recovery now but to check turn off the phone and boot to recovery with the Bixby, vol up and power buttons then once you are done confirming go to reboot and select power off then boot the phone by holding the buttons like you would to get to recovery but only till the first warning screen comes back then let them go and it should boot back rooted like before
23 If you have any problems try to reboot as I just explained again and if that still doesn't work the device may have encrypted it self so you will have to boot back to recovery and select wipe, format data, type in yes and confirm then go back to wipe option and select factory reset then go to reboot, power off, and hold buttons like booting to recovery then let go when the first warning screen comes back
24 You will need to setup you device again but its unencrypted now...enjoy!!!
Also if you think that You Bricked your device Because something just seems totally wrong Hold down the Bixby button and volume down plugin cable to you computer and other end into your phone and it should go into download mode then you can re Flash the stock firmware using odin and if you like to redo all these steps all over again but make sure you don't Miss a step and do it verbatim.
Click to expand...
Click to collapse
Move this to Guides,News and Discussion.Thanks.
Do you have random reboots?)
FlatOutRU said:
Do you have random reboots?)
Click to expand...
Click to collapse
No...do you?
81! said:
Just remember to boot your phone with vol up, Bixby, and power till the first warning screen comes back EVERYTIME!!! If you are in recovery power off then then hold the buttons. If you just power on by holding power you might lose root.
Click to expand...
Click to collapse
Hi... just ask..
if i power on by holding power then i lose root, in that condition then i have to reflash all over again?
and in topjohnwu instruction here https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
he said that i have to flash not only magisk patched.
tar, but also with BL, CP and Csc too...
did you only flash AP only?
thank you...
Sent from my MI 8 using Tapatalk
Re
No you would just have to do a factory reset and you can do that right on your phone if you go to recovery
But
But yes is far as flashing I did a full factory Flash with all the files but then I did a second Flash with the patched magisk file I just flashed in the AP slot Then I set up the phone but skipping everything not putting any information in it and then shut off the phone booted it to recovery and did a factory reset But of course that in the rest of it is all in My instructions
81! said:
No you would just have to do a factory reset and you can do that right on your phone if you go to recovery
But
But yes is far as flashing I did a full factory Flash with all the files but then I did a second Flash with the patched magisk file I just flashed in the AP slot Then I set up the phone but skipping everything not putting any information in it and then shut off the phone booted it to recovery and did a factory reset But of course that in the rest of it is all in My instructions
Click to expand...
Click to collapse
thanks will try this way...
Sent from my MI 8 using Tapatalk
81! said:
No you would just have to do a factory reset and you can do that right on your phone if you go to recovery
But
But yes is far as flashing I did a full factory Flash with all the files but then I did a second Flash with the patched magisk file I just flashed in the AP slot Then I set up the phone but skipping everything not putting any information in it and then shut off the phone booted it to recovery and did a factory reset But of course that in the rest of it is all in My instructions
Click to expand...
Click to collapse
One last question bro....
if i restart my device.. i mean restart from power menu.. am i lose root too?
because its really complicated if i had to factory reset all time.. [emoji16]
Sent from my MI 8 using Tapatalk
Vuska said:
One last question bro....
if i restart my device.. i mean restart from power menu.. am i lose root too?
because its really complicated if i had to factory reset all time.. [emoji16]
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Look all you really have to do is hold down the volume up Bixby and power at the same time until the 1st warning screen comes back on then let it go if you power it up like this every single time you will still have root if you try to power it would just the power button you're going to lose root and then you have to do a factory reset but if you want to go against what I say and just hold the power button-down and lose root then that's up to you if you wanna be doing a factory reset every time
81! said:
Look all you really have to do is hold down the volume up Bixby and power at the same time until the 1st warning screen comes back on then let it go if you power it up like this every single time you will still have root if you try to power it would just the power button you're going to lose root and then you have to do a factory reset but if you want to go against what I say and just hold the power button-down and lose root then that's up to you if you wanna be doing a factory reset every time
Click to expand...
Click to collapse
that if we start from power off right.. ?
what i mean is.. what if we restart the phone.. restart from power menu... is it still lose root?
i get what your instructions to hold power, vol up and bixbi [emoji120]
sorry ... doesn't mean to against what you say.. [emoji4]
Sent from my MI 8 using Tapatalk
Yeay... finally success...
and already found my answer about rebooting /restarting device... And No.. restart will not make device lose root.
and i will remember to power on (from off position) with vol up+ bixby + power
Thank you my bro...
sorry if you missunderstand me before..
all the best...
FYI, i'm using Samsung S10+ Snapdragon HK region G9750
so maybe i cannot install twrp...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MI 8 using Tapatalk
Dude...bro...I mean, dude...
Vuska said:
that if we start from power off right.. ?
what i mean is.. what if we restart the phone.. restart from power menu... is it still lose root?
i get what your instructions to hold power, vol up and bixbi [emoji120]
sorry ... doesn't mean to against what you say.. [emoji4]
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Yes if you take to long to hold the buttons after the screen goes black when restarting...OK?
Vuska said:
Yeay... finally success...
and already found my answer about rebooting /restarting device... And No.. restart will not make device lose root.
and i will remember to power on (from off position) with vol up+ bixby + power
Thank you my bro...
sorry if you missunderstand me before..
all the best...
FYI, i'm using Samsung S10+ Snapdragon HK region G9750
so maybe i cannot install twrp...
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Nice! I also have this model. Do you have some random reboots?
Vuska said:
Yeay... finally success...
and already found my answer about rebooting /restarting device... And No.. restart will not make device lose root.
and i will remember to power on (from off position) with vol up+ bixby + power
Thank you my bro...
sorry if you missunderstand me before..
all the best...
FYI, i'm using Samsung S10+ Snapdragon HK region G9750
so maybe i cannot install twrp...
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Are you willing to give it a try with for all your snapdragon buddies?
81! said:
Are you willing to give it a try with for all your snapdragon buddies?
Click to expand...
Click to collapse
you mean trying flash twrp?
Sent from my MI 8 using Tapatalk
---------- Post added at 21:31 ---------- Previous post was at 21:30 ----------
FlatOutRU said:
Nice! I also have this model. Do you have some random reboots?
Click to expand...
Click to collapse
still no have random reboot... but maybe i have still very few app...
tomorrow will continue install app...
Sent from my MI 8 using Tapatalk
Vuska said:
you mean trying flash twrp?
Sent from my MI 8 using Tapatalk
---------- Post added at 21:31 ---------- Previous post was at 21:30 ----------
still no have random reboot... but maybe i have still very few app...
tomorrow will continue install app...
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Just remember to patch the twrp file with magisk
Then you can flash the file it creates in downloads with the twrp app
Vuska said:
Yeay... finally success...
and already found my answer about rebooting /restarting device... And No.. restart will not make device lose root.
and i will remember to power on (from off position) with vol up+ bixby + power
Thank you my bro...
sorry if you missunderstand me before..
all the best...
FYI, i'm using Samsung S10+ Snapdragon HK region G9750
so maybe i cannot install twrp...
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
You should get the canary magisk app
Can I use this method with snapdragon S10 with unlocked bootloader ?
Silver Wx said:
Can I use this method with snapdragon S10 with unlocked bootloader ?
Click to expand...
Click to collapse
Yes but you have to use a different magisk version for the snapdragon models that have an unlocked bootloader, and in order to flash TWRP, you must install firmware from the Chinese S10 (I'm assuming that you have the Hong Kong S10)
Sent from my Galaxy S10 using XDA Labs
Like I said you can try...
Silver Wx said:
Can I use this method with snapdragon S10 with unlocked bootloader ?
Click to expand...
Click to collapse
The twrp is so far only for exynos
But it might work for snapdragon
But I have no Idea
I don't know anyone who has tried it yet
Maybe Google if someone else has
Related
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
same prob
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
Same problem as OP, and I can not get into download mode either. If I do as above, it still goes on booting .
saeidzzz said:
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
you are a life saver!
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
I thought I was going to have to factory reset my phone like other forums suggested and lose everything. Thanks to your suggestion I was able to get out of recovery reboot loop. Thank you!
Thanks for your help, you are a lifesaver lol! I saved so much money and time because of you. Have a great day
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
But how to enter recovery it still says set warranty bit recovery
i am facing problem with set warranty bit: recovery in samsung J5 model...
samsung j5 500f
i have the same problem when i flash twrp recovery..any solution ????
Ghats normal
Sent from my SM-N900T using XDA-Developers mobile app
My Fix
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
ulop3z said:
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
Click to expand...
Click to collapse
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Tmobilefan906 said:
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Click to expand...
Click to collapse
The phone is fine now, it was just stuck on the loop and spamming home was the only way out, its fine now I've had no problems and it boots up fine
This happens...
This happens to almost everyone at some point of time. There is no need to worry as you just need to flash recovery like TWRP or CWM. To shed some light on this issue... boot loops mainly happen when you uses the incorrect version of software with your ROM or stock firmware. By using youtube you can look at the videos of your phone model and find the recovery version number needed.
For anyone who has a Note 3 T-Mobile phone who is still stuck! I am willing to make a video to show how to fix this and provide all the firmware/version numbers + links in one bundled location to make it easier.
ALL PHONES ARE VERY specific... ONLY USE THE CORRECT FIRMWARE FOR YOUR MODEL PHONE
Again, if you have a Samsung Note 3 T-Mobile, model number SM-N900T and are still lost. Let me know so I can shot a video and bundle files needed.
---------- Post added at 08:44 AM ---------- Previous post was at 08:38 AM ----------
cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
Don't be scared by this... just choose the correct versions before blindly trying to install a ROM. Also, only use links from main sources if you dont fell like auditing the code!
Hi guys, sorry for might be late about helping you now years later... But recently I've found something interesting about fixing this issue.
*****
Fix: (100% working in Galaxy Grand Prime SM-G530H)
UPDATED: More detailed info!
# Before flashed Recovery or Root:
1. Root device using Odin or any other rooting known workaround.
2. Backup Recovery (optional), and Kernel using Rashr (available on PlayStore).
3. Flash Custom Recovery (TWRP), using Odin PC software or TWRP android app.
4. Flash backed-up Kernel.img file to Boot partition using TWRP install section.
5. Reboot system (It may take a few time to boot)
# After flashed Recovery or Root: (accidentally or without knowing)
1. Search online and download your exact Phone Stock Kernel.
2. Follow *before flashed* above ↑ from 3rd.
Bonus info:
Even after flashing TWRP, you might be able to Boot device yet, by going to TWRP → Advanced → Reboot system. (It bypass bootlooping to Recovery, while: “Set Warranty Bit : Recovery”).
That's all! Try at your own, then share it!
Hello everyone! My Galaxy Tab Pro 8.4 won't turn on anymore. I tried charging it, that wasn't the issue. I left it on the charger and nothing changed. I plugged it into my PC and it didn't make any noises and it doesn't even recognize it as an unrecognizable device. Is there any button combo to see if it's 100% fried or not?
A couple of weeks ago I rooted it and updated it to another ROM, but it had been working PERFECTLY since then! WEEKS!
Any suggestions?
power button
Press and hold the power button for 30 - 40 seconds and see if it powers up. I had this problem yesterday.
dwcasey said:
Press and hold the power button for 30 - 40 seconds and see if it powers up. I had this problem yesterday.
Click to expand...
Click to collapse
This did not work
Hold the power button down for 2 minutes and don't let go, also hold vol up while doing it to see if you can get into recovery.
keep it plugged into the charger while you do this.
otyg said:
Hold the power button down for 2 minutes and don't let go, also hold vol up while doing it to see if you can get into recovery.
keep it plugged into the charger while you do this.
Click to expand...
Click to collapse
OK, this worked. How can I unroot and restore the OEM bootloader and everything?
Before flashing I made a TWRP Backup, as well as a Flashify-backup.
I have these two folders on my desktop.
zkyevolved said:
OK, this worked. How can I unroot and restore the OEM bootloader and everything?
Before flashing I made a TWRP Backup, as well as a Flashify-backup.
I have these two folders on my desktop.
Click to expand...
Click to collapse
to restore everything you will need to boot into download mode , if you are in download mode now you can use kies or odin to flash the stock firmware and this will correct everything.
to boot to download mode its either (Power + vol down) , or (power + vol up) , try both until you see it say download mode., or if you are currently in twrp you can select reboot->download mode
you can get th stock firmware here
http://www.sammobile.com/firmwares/database/SM-T320/
(Cellular south) XAR is USA wifi model.
otyg said:
to restore everything you will need to boot into download mode , if you are in download mode now you can use kies or odin to flash the stock firmware and this will correct everything.
to boot to download mode its either (Power + vol down) , or (power + vol up) , try both until you see it say download mode., or if you are currently in twrp you can select reboot->download mode
you can get th stock firmware here
http://www.sammobile.com/firmwares/database/SM-T320/
(Cellular south) XAR is USA wifi model.
Click to expand...
Click to collapse
And this will remove root, TWRP and any custom roms?
zkyevolved said:
And this will remove root, TWRP and any custom roms?
Click to expand...
Click to collapse
yeah it will be like when you first bought it.
btw when using Odin3 put the firmware under the AP box, don't mess with any options.
Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Isn't download mode volume down + home + power?
Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk
audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks
ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?
Removed the battery, inserted the jig, and then inserted a charged battery?
audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.
Try flashing the entire ROM in AP.
audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...
Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.
Just opened the Magisk Manager app, updated from within the app using the Reccommended method, device reboots, now stuck on the 'Samsung Galaxy Note10+ 5G' screen.
I cant even get it into TWRP which is a pain.
vinokirk said:
Just opened the Magisk Manager app, updated from within the app using the Reccommended method, device reboots, now stuck on the 'Samsung Galaxy Note10+ 5G' screen.
I cant even get it into TWRP which is a pain.
Click to expand...
Click to collapse
Reboot to EDL/BROM (search for right key combination) and reflash ROM using SP Flash Tool. Then flash latest Magisk
I have let the phone run down battery, pressed vol up and power, but still nothing.
0purple said:
Reboot to EDL/BROM (search for right key combination) and reflash ROM using SP Flash Tool. Then flash latest Magisk
Click to expand...
Click to collapse
I have already tried key combinations, but still the same.
@hainguyenthao helped me out. Showed me how to get into downlaod mode without pressing power and vol down!
Let the phone power down, leave it for 30 mins or so. then press vol up and vol down and insert USB cable.
OR if phone is in bootloop, press vol down and power till phone reboots, then VERY quickly hold down vol up and vol down and plug in USB cable
Dude, To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable.
But for your problem you have to put your device in recovery mode then flash ROM. Still the problem continues, you can try this download link
I've the same problem with my Note 10+... Was on Dr. Ketan Rom and update with magisk app ends in a boot loop, I couldn't break -.-
@vinokirk could you solve the problem?
Edit: Thanks to @starpandi2004 - on the first try I can break the bootloop, but just to the first screen. After choosing download mode, it comes bootloop again -.-
Is it worth to try to lock bootloader and factory reset phone? What will happen? Is the original rom somewhere packed and would be installed again by factory reset?
Saalschlacht said:
I've the same problem with my Note 10+... Was on Dr. Ketan Rom and update with magisk app ends in a boot loop, I couldn't break -.-
@vinokirk could you solve the problem?
Edit: Thanks to @starpandi2004 - on the first try I can break the bootloop, but just to the first screen. After choosing download mode, it comes bootloop again -.-
Is it worth to try to lock bootloader and factory reset phone? What will happen? Is the original rom somewhere packed and would be installed again by factory reset?
Click to expand...
Click to collapse
Bro what about TWRP recovery? can you able access it...
if yes then dirty flash KETAN ROM..it will solve...
just had same same problem.
i connected mine to the pc and use power+up volume until twrp appeear and them restores from last backup
I got the simplest solution for this issue!
If u r stuck on Samsung logo, then try this method.
Turn off the phone by pressing vol down and power button. Once the phone is shut down, release and press again the vol down and power button when u see Samsung note 10 plus screen, then release the power button but keep pressing vol down. Once u see the "Samsung" logo, immediately release the vol down button and quickly press vol up button.
This will boot up without any problem!
So I tried to install TWRP and followed the steps, used ODIN v3.14, it tried to upload something but failed with an error.
Now the phone has gone into a perpetual restart cycle:
1) Reboot (by itself or Vol Down + Power)
2) Blank screen with: "Galaxy A70 - Secured by Knox - Powered by Android"
3) Screen with: "This phone's bootloader is unlocked and its software integrity... - Press power key to continue"
4) Blank screen with: "Galaxy A70 - Secured by Knox - Powered by Android"
5) Blank screen with: "SAMSUNG" for a very long time
6) eventually back to step 1
****************
Is there a way to get back this phone?
I was flashed twrp normally and nothing happened for me. Did you pressed vol up+power ASAP after flash successful ? If not, go to download mode and flash again, then press vol up+power immediately.
I never managed to flash TWRP, ODIN displayed an error when I tried.
1. Your using the wrong version of odin. You need 3.13.3
2. Sounds like your not key comboing fast enough?
3. You can not hard brick the A70. If its in a boot loop, plug into pc and Continue to hold vol up and down till it boots to download mode. Flash latest stock version then reboot.
[CLOSED] Delete
Mod edit: Thread closed as the threadowner removed the content of the opening post! Oswald Boelcke, Senior Moderator Delete
forum.xda-developers.com
Zilliman said:
I never managed to flash TWRP, ODIN displayed an error when I tried.
Click to expand...
Click to collapse
Did you boot to Android, check oem in dev options then power off and then enter download mode? Using odin 3.13.3?
Jinetty21 said:
I was flashed twrp normally and nothing happened for me. Did you pressed vol up+power ASAP after flash successful ? If not, go to download mode and flash again, then press vol up+power immediately.
Click to expand...
Click to collapse
Dont press power during the end process, its power and vol down till screen goes blank then immediately let go and press and hold just vol up.
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Zilliman said:
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Click to expand...
Click to collapse
Get the original firmware for your phone from a 3rd party website.
Zilliman said:
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Click to expand...
Click to collapse
Get frija from the link in my guide under tools, install it on your pc, then use it to download your latest stock firmware. Make sure you have odin 3.13.3 as well
In frija, enter the model number and the region code of the A70
In my case it would be SM-A705MN/ TTT
Do NOT flash other models, it must be for your Model. Also, dont flash csc_home in this instance, use csc. When loading the AP file, it will take a little bit to load in and you may see odin has stopped working, ignore that and it will eventually load, make sure auto reboot is unchecked everytime you use odin. The first step in my guide says to download and flash latest stock firmware. Anytime your going to do modifications to a device, make sure to have the latest stock firmware first.
Many thanks for suggestions.
I managed to download the stock firmware from https://www.sammobile.com/samsung/galaxy-a70/firmware/SM-A705FN/BTU/#SM-A705FN and have uploaded it using ODIN 3.14 The phone has now started, like new / factory reset.
I am now setting it up (Samsung firmware) just to make sure I have got my phone back.
After I will try to zap and upload another ROM.
MarvinMod said:
Dont press power during the end process, its power and vol down till screen goes blank then immediately let go and press and hold just vol up.
Click to expand...
Click to collapse
I didn't said that hold power button during flash. Press vol up+power after successful flash, that means when odin say pass then phone goes black and boots, while bootsplash is coming, immediately press and hold vol up+power to switch to recovery.
Jinetty21 said:
I didn't said that hold power button during flash. Press vol up+power after successful flash, that means when odin say pass then phone goes black and boots, while bootsplash is coming, immediately press and hold vol up+power to switch to recovery.
Click to expand...
Click to collapse
Its not up+power after successful flash.
Its down+power till screen goes blank then immediately hold vol up only. Is what im trying to tell you. It will NOT work the way you described.
Zilliman said:
Many thanks for suggestions.
I managed to download the stock firmware from https://www.sammobile.com/samsung/galaxy-a70/firmware/SM-A705FN/BTU/#SM-A705FN and have uploaded it using ODIN 3.14 The phone has now started, like new / factory reset.
I am now setting it up (Samsung firmware) just to make sure I have got my phone back.
After I will try to zap and upload another ROM.
Click to expand...
Click to collapse
Glad you got her going. Thought you said you had a GM not an FN but if its working
MarvinMod said:
Its not up+power after successful flash.
Its down+power till screen goes blank then immediately hold vol up only. Is what im trying to tell you. It will NOT work the way you described.
Click to expand...
Click to collapse
It's not necessary, i can go up to recovery with what i'm saying. What do you mean by vol down+power ? That doesn't do anything. BTW I have FN model.
Jinetty21 said:
It's not necessary, i can go up to recovery with what i'm saying. What do you mean by vol down+power ? That doesn't do anything. BTW I have FN model.
Click to expand...
Click to collapse
In download mode, Android 11, to exit, it litterly tells you on the screen to hold vol down and power to reboot. Vol up and power does nothing in this state. To get to twrp from download mode, hold vol down and power till screen goes blank and then press and hold vol up. This will boot to twrp. Other ways to boot to twrp is power off device, plug into pc, wait for it to charge, then hild vol up and power till it boots or if magisk is installed, use magisk reboot options.
Dude, your key combos and information is incorrect. You can not reboot to twrp from download mode by holding vol up and power.
Samsung changed the keymap combination to boot into recovery on 3.1, so to boot into recovery stock or whatever it is, just follow the steps:
Connect your cellphone to the USB port.
Press on Volume UP during boot.
Samsung does weird things
haky 86 said:
Samsung changed the keymap combination to boot into recovery on 3.1, so to boot into recovery stock or whatever it is, just follow the steps:
Connect your cellphone to the USB port.
Press on Volume UP during boot.
Samsung does weird things
Click to expand...
Click to collapse
Yes, that's.what i'm saying. I'm using September Update's bootloader to get rid of this weirdness lol
MarvinMod said:
Dude, your key combos and information is incorrect. You can not reboot to twrp from download mode by holding vol up and power.
Click to expand...
Click to collapse
My key combo is true, actually the wrong one is yours This is the valid way also on the latest bootloader but like haky86 said, on latest bootloader Samsung wants you to plug USB cable to do this.
So we are agreed, there is no way to get to TWRP unless you are connected to USB? For example, on my one old phone, I used to keep TWRP backups on the SD card, and I could restore anywhere, I did not need to be near the PC with a USB cable.
Zilliman said:
So we are agreed, there is no way to get to TWRP unless you are connected to USB? For example, on my one old phone, I used to keep TWRP backups on the SD card, and I could restore anywhere, I did not need to be near the PC with a USB cable.
Click to expand...
Click to collapse
there's a fix in the telegram group, I don't remember which was because I left all cringy groups.