Anybody get an update to one ui on their LTE model Galaxy watch? I've received it on my bluetooth only version but not the LTE....
*UPDATE* - Had to manually update to OneUI due to it not being pushed to me.
A BIG thanks goes to thorn11166 for pointing out where I could get the firmware.. here it is linked below for the R-805 and R-815 (ATT LTE models). Also linked below is the NetOdin download along with instructions how to manually update.
thorn11166 said:
AWESOME! glad to hear it worked out for you.
Click to expand...
Click to collapse
you could drop both links in the OP so people can see it when they look in on the thread
Huey85 said:
0. This process will factory reset your Watch, so make sure you've backed up everything you need!
1. Hold down the Home button for 6-10 seconds until the message " Rebooting ... "
2. Quickly press Home three times until the Reboot Menu appears. (The menu is available for about 10 seconds, after which the clock goes back to "Rebooting ...")
3. The menu selection is made by long holding Home button. To go into Download (wireless mode) press the home button until "Download (Wireless)" is highlighted, then hold down the Home button.
4. Download mode will load in WPS mode. Press Home twice to change the mode to the AP.
5. Connect to the access point that appears (for example, SM-R800-a2a5) (ODIN for some reason does not see the device if several networks are connected.)
6. Run NetOdin3 and then set the firmware files for BL, AP and CSC, then click Start (Copying/flashing of firmware takes about 20 minutes).
7. After the files are downloaded, the Watch will reboot. Again, hold Home and highlight & select Recovery in the Reboot menu.
8. The "Setting Up" screen and "Resetting" screen should appear and after that the Watch will reboot and boot as usual.
N.B. It is advisable to check whether you have disabled the function "find my watch" or make sure you remember the password to your Samsung Account
Click to expand...
Click to collapse
R805U - ONE UI FIRMWARE
R815U - ONE UI FIRMWARE
NetOdin
dnkeyhnter said:
Anybody get an update to one ui on their LTE model Galaxy watch? I've received it on my bluetooth only version but not the LTE.
Click to expand...
Click to collapse
What's the new One UI Version # ?
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
I have One UI 1.0 still.
Tel864 said:
I have One UI 1.0 still.
Click to expand...
Click to collapse
Me too - I haven't heard of any One UI update...
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
No update to my LTE One UI 1.0
Hmmm... My 805U is still on 4.0.0.1
?
The request was about the One UI Version which is still 1.0.
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
KruseLudsMobile said:
The request was about the One UI Version which is still 1.0.
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
Click to expand...
Click to collapse
I think you misunderstood what i was asking. I'm not talking about an update from one ui 1.0 to another... I'm talking about an update from 4.0.0.1 to 4.0.0.4, because my watch hasn't got the update to 4.0.0.4 and i was asking if anybody else is in the same boat.
dnkeyhnter said:
I think you misunderstood what i was asking. I'm not talking about an update from one ui 1.0 to another... I'm talking about an update from 4.0.0.1 to 4.0.0.4, because my watch hasn't got the update to 4.0.0.4 and i was asking if anybody else is in the same boat.
Click to expand...
Click to collapse
I am on Verizon, in northern NJ - got that update maybe 5-6 weeks ago... Hope that helps!
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
KruseLudsMobile said:
I am on Verizon, in northern NJ - got that update maybe 5-6 weeks ago... Hope that helps!
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
Click to expand...
Click to collapse
Thank you, that helps tremendously! That's exactly what i was looking for.. Mine is At&t. Maybe that's why i haven't got it yet.
dnkeyhnter said:
Thank you, that helps tremendously! That's exactly what i was looking for.. Mine is At&t. Maybe that's why i haven't got it yet.
Click to expand...
Click to collapse
I have the files if you want to flash it yourself, that is what I ended up doing the other day because of no update.
thorn11166 said:
I have the files if you want to flash it yourself, that is what I ended up doing the other day because of no update.
Click to expand...
Click to collapse
Thank you! That would be outstanding!
dnkeyhnter said:
Thank you! That would be outstanding!
Click to expand...
Click to collapse
Here ya go, this is for the 42mm anyways
thorn11166 said:
Here ya go, this is for the 42mm anyways
Click to expand...
Click to collapse
I really appreciate that! But I have the 46mm version.
dnkeyhnter said:
I really appreciate that! But I have the 46mm version.
Click to expand...
Click to collapse
Dang, I'm on nights so I'll see if i can find you anything
thorn11166 said:
Dang, I'm on nights so I'll see if i can find you anything
Click to expand...
Click to collapse
Much appreciated! I have the AT&T LTE model. R-805U
If you are willing to spend around $6 you can download the files here and just use NetOdin to flash them.
dnkeyhnter said:
Much appreciated! I have the AT&T LTE model. R-805U
Click to expand...
Click to collapse
That is where I got mine from, site looks shady but goes through paypal and you get immediate access. If you do go this route make sure you upload the files to Mega or some other source so others can access them in the future. You only need the AP, BL, and CP to flash the firmware.
thorn11166 said:
If you are willing to spend around $6 you can download the files here and just use NetOdin to flash them. That is where I got mine from, site looks shady but goes through paypal and you get immediate access. If you do go this route make sure you upload the files to Mega or some other source so others can access them in the future. You only need the AP, BL, and CP to flash the firmware.
Click to expand...
Click to collapse
You're a genius! Worked flawlessly!
Link to the files I downloaded if there is somewhere you would like to share them:
https://mega.nz/#F!os0USCwa!2KDTnoerjVcmYfVTi4TnTA
Thanks again!
...now only if T-Mobile would release the update to OneUI for their R-775T (S3 Classic LTE)......
dnkeyhnter said:
You're a genius! Worked flawlessly!
Link to the files I downloaded if there is somewhere you would like to share them:
https://mega.nz/#F!os0USCwa!2KDTnoerjVcmYfVTi4TnTA
Thanks again!
...now only if T-Mobile would release the update to OneUI for their R-775T (S3 Classic LTE)......
Click to expand...
Click to collapse
AWESOME! glad to hear it worked out for you.
---------- Post added at 10:59 PM ---------- Previous post was at 10:49 PM ----------
thorn11166 said:
AWESOME! glad to hear it worked out for you.
Click to expand...
Click to collapse
you could drop both links in the OP so people can see it when they look in on the thread
Huey85 said:
0. This process will factory reset your Watch, so make sure you've backed up everything you need!
1. Hold down the Home button for 6-10 seconds until the message " Rebooting ... "
2. Quickly press Home three times until the Reboot Menu appears. (The menu is available for about 10 seconds, after which the clock goes back to "Rebooting ...")
3. The menu selection is made by long holding Home button. To go into Download (wireless mode) press the home button until "Download (Wireless)" is highlighted, then hold down the Home button.
4. Download mode will load in WPS mode. Press Home twice to change the mode to the AP.
5. Connect to the access point that appears (for example, SM-R800-a2a5) (ODIN for some reason does not see the device if several networks are connected.)
6. Run NetOdin3 and then set the firmware files for BL, AP and CSC, then click Start (Copying/flashing of firmware takes about 20 minutes).
7. After the files are downloaded, the Watch will reboot. Again, hold Home and highlight & select Recovery in the Reboot menu.
8. The "Setting Up" screen and "Resetting" screen should appear and after that the Watch will reboot and boot as usual.
N.B. It is advisable to check whether you have disabled the function "find my watch" or make sure you remember the password to your Samsung Account
Click to expand...
Click to collapse
R805U - ONE UI FIRMWARE
R815U - ONE UI FIRMWARE
NetOdin
Related
HTC has released an update for the Touch Pro 2 which "amends the internal management of SMS functionality, and enhances SMS transmission stability".
You can get it here. The update seems to be missing on the European mirrors at the moment, but the US one works.
thanks dude for the info... i'll try that.
i was experiencing some lagging in the messaging-centre. also tried this htc messaging v1.8 from someone but couldn't see any change. maybe this fixes some things...
So does someone know what is this update for?
mydexterid said:
So does someone know what is this update for?
Click to expand...
Click to collapse
supposedly its an enhancement for the SMS app, a lot of people have been experiencing issues like crashing and being unstable
this fix however should solve those problems
im suprised HTC is still supporting this device, hopefully theyll release a ROM before WP7.....which highly doubt it but you never know
XERO_Racer said:
supposedly its an enhancement for the SMS app, a lot of people have been experiencing issues like crashing and being unstable
this fix however should solve those problems
im suprised HTC is still supporting this device, hopefully theyll release a ROM before WP7.....which highly doubt it but you never know
Click to expand...
Click to collapse
Never experienced crashing/unstable... but brutally SLOW yes! And after installing this "fix" it is still slow as hell.
They should've already made a fix for the SOD problem ages ago...
Is there a custom ROM that'll fix this problem?
While this fix shows up under the UK link, if I go to U.S. site and put in Sprint Touch Pro 2, the fix is not listed? Is this only for European phones?
Just installed: it updates to HTC Messages Version 1.5 (Build 2016.2424)
It didnt work on my sprint US touch pro2 "this hot fix is not compatible with your device"
catman51 said:
While this fix shows up under the UK link, if I go to U.S. site and put in Sprint Touch Pro 2, the fix is not listed? Is this only for European phones?
Click to expand...
Click to collapse
Marvrollo said:
It didnt work on my sprint US touch pro2 "this hot fix is not compatible with your device"
Click to expand...
Click to collapse
I believe this may be for GSM only, not European only as they list US and Asia download locations - I believe Sprint is CDMA and I think there is a US GSM version?
Anyhow, I cannot download from Europe 1 or 2 locales, but can from US, although when I tap on the .exe file once transferred to my device, nothing happens - anyone else experience similar?
In addition, where can I find out the version information of HTC messages so I can check my current one?
Yeah tried this yesterday and it didn't work for my VZW TP2. Hopfully we will get a compatible fix.
agrickard said:
I believe this may be for GSM only, not European only as they list US and Asia download locations - I believe Sprint is CDMA and I think there is a US GSM version?
Anyhow, I cannot download from Europe 1 or 2 locales, but can from US, although when I tap on the .exe file once transferred to my device, nothing happens - anyone else experience similar?
In addition, where can I find out the version information of HTC messages so I can check my current one?
Click to expand...
Click to collapse
Naw I unsuccessfully tried to install on my GSM T-Mobile TP2. I'm curious to know are there any custom ROM's that do not have this issue.
agrickard said:
In addition, where can I find out the version information of HTC messages so I can check my current one?
Click to expand...
Click to collapse
Goto the messages tab of Sense/TouchFlo, then tap "All Messages" on bottom left, then tap "Menu" on bottom right, tap About.
EDIT: I'm using a T7381 (Telstra TP2) with HTC Stock European 2.07.401.1 WWE ROM
in my opinion the update didn't have the expected effect.
SMS is still very slow, eventually 2% faster that before...
hope they will release a fixed ROM that solves the main problems ...
bigjezza said:
Goto the messages tab of Sense/TouchFlo, then tap "All Messages" on bottom left, then tap "Menu" on bottom right, tap About.
Click to expand...
Click to collapse
That was what I was looking for but that choice is not there on mine. Exploring "Settings" then "Options" doesn't reveal anything like that either!
agrickard said:
Anyhow, I cannot download from Europe 1 or 2 locales, but can from US, although when I tap on the .exe file once transferred to my device, nothing happens - anyone else experience similar?
Click to expand...
Click to collapse
Europe mirrors still appear down, but once I had put the .exe file in 'my documents' of the device, not sd card, soft reset and then run it, it worked.
agrickard said:
In addition, where can I find out the version information of HTC messages so I can check my current one?
Click to expand...
Click to collapse
bigjezza said:
Goto the messages tab of Sense/TouchFlo, then tap "All Messages" on bottom left, then tap "Menu" on bottom right, tap About.
Click to expand...
Click to collapse
agrickard said:
That was what I was looking for but that choice is not there on mine. Exploring "Settings" then "Options" doesn't reveal anything like that either!
Click to expand...
Click to collapse
I still don't know how to check the version of my HTC messages client - anyone?
Also on other threads I have read about enabling 'Secure Box' - what is this?
See thread title; been looking but I'm coming up empty. Anyone?
*Needs to be for an AT&T Note 7, US region
tnpir4002 said:
See thread title; been looking but I'm coming up empty. Anyone?
*Needs to be for an AT&T Note 7, US region
Click to expand...
Click to collapse
Looking for the same, but no luck ;^(
Hot on the trail of the elusive AT&T Note 7 SM-N930A "Green Battery" ROM! Getting close, please stand by...
Oh, and just to be clear, the N930AUCS1APH1_N930AATT1APH1_ATT_FULL_SAMFIRM.NET ROM will NOT work if you already had the Green Battery ROM installed.
It will only work if you had the original stock ROM.
Eureka! I found and belled the Cat! Er "green Bat-tery ROM for the SM-N930A!
(Files are dated October 2016. Have already SS and Odin'ed the firmware and all is well in the universe once more!)
Can I post the link here? Or is this against site policy?
Tangopro said:
Eureka! I found and belled the Cat! Er "green Bat-tery ROM for the SM-N930A!
(Files are dated October 2016. Have already SS and Odin'ed the firmware and all is well in the universe once more!)
Can I post the link here? Or is this against site policy?
Click to expand...
Click to collapse
Can you send me a private message for the link... Ibeen looking for the past 48 hours or this and thought all hope was lost! You are a Savior if you can do that for me !!!
lil2kiddd said:
Can you send me a private message for the link... Ibeen looking for the past 48 hours or this and thought all hope was lost! You are a Savior if you can do that for me !!!
Click to expand...
Click to collapse
I also need these files!! Please pretty please...
Tangopro said:
Eureka! I found and belled the Cat! Er "green Bat-tery ROM for the SM-N930A!
(Files are dated October 2016. Have already SS and Odin'ed the firmware and all is well in the universe once more!)
Can I post the link here? Or is this against site policy?
Click to expand...
Click to collapse
I'd appreciate a dm with a link as well. Tried and failed many times last night.
Tangopro said:
Eureka! I found and belled the Cat! Er "green Bat-tery ROM for the SM-N930A!
(Files are dated October 2016. Have already SS and Odin'ed the firmware and all is well in the universe once more!)
Can I post the link here? Or is this against site policy?
Click to expand...
Click to collapse
Yes. I have been looking for this as well. Please share link. Thanks
Tangopro said:
Eureka! I found and belled the Cat! Er "green Bat-tery ROM for the SM-N930A!
(Files are dated October 2016. Have already SS and Odin'ed the firmware and all is well in the universe once more!)
Can I post the link here? Or is this against site policy?
Click to expand...
Click to collapse
Mind if I get that link too? Thanks!
Link sent. Make sure to backup your phone (I used Samsung Smart Switch) before proceeding to update via Odin.
Oh, and don't forget to install a firewall after updating - to block unwanted app or package activity
I use Grey Shirts - NoRoot Firewall
https://play.google.com/store/apps/d...firewall&hl=en
And don't forget Package Disabler Pro 6.3 (important) - There are many links here to the apk as well as info on which packages to block.
I actually bought the latest version of the app so that it was registered (and supports the dev - only $1.49 ;^), then uninstalled and installed 6.3.
https://play.google.com/store/apps/d...ablerpro&hl=en
PS I tell friends that ask why I keep this phone and don't turn it in? (1) Turn it it in for what? There is no S8 or Note 8 (2) Imagine buying a BMW i8 (or any car) that had recalls and the car company sent an OTA that crippled the car slowing it down to a crawl while spamming a dash message telling you to pull over to the side of the road? There would be outrage since from the consumer's perspective ITS THEIR CAR!
Tangopro said:
PS I tell friends that ask why I keep this phone and don't turn it in? (1) Turn it it in for what? There is no S8 or Note 8 (2) Imagine buying a BMW i8 (or any car) that had recalls and the car company sent an OTA that crippled the car slowing it down to a crawl while spamming a dash message telling you to pull over to the side of the road? There would be outrage since from the consumer's perspective ITS THEIR CAR!
Click to expand...
Click to collapse
Amen to that.
Tangopro said:
Link sent. Make sure to backup your phone (I used Samsung Smart Switch) before proceeding to update via Odin.
Oh, and don't forget to install a firewall after updating - to block unwanted app or package activity
I use Grey Shirts - NoRoot Firewall
And don't forget Package Disabler Pro 6.3 (important) - There are many links here to the apk as well as info on which packages to block.
I actually bought the latest version of the app so that it was registered (and supports the dev - only $1.49 ;^), then uninstalled and installed 6.3.
PS I tell friends that ask why I keep this phone and don't turn it in? (1) Turn it it in for what? There is no S8 or Note 8 (2) Imagine buying a BMW i8 (or any car) that had recalls and the car company sent an OTA that crippled the car slowing it down to a crawl while spamming a dash message telling you to pull over to the side of the road? There would be outrage since from the consumer's perspective ITS THEIR CAR!
Click to expand...
Click to collapse
Could I please get that link too? I've been searching everywhere for a good ATT N930A firmware, to no avail.
Tangopro said:
Eureka! I found and belled the Cat! Er "green Bat-tery ROM for the SM-N930A!
(Files are dated October 2016. Have already SS and Odin'ed the firmware and all is well in the universe once more!)
Can I post the link here? Or is this against site policy?
Click to expand...
Click to collapse
May i please get link also?
Ok, i got rom installed, installed package dissabler i found this list of apps to disable
com.policydm
com.sec.android.soagent
com.samsung.android.omcagent
com.wssyncmldm
com.samsung.firmware.sensorhub
com.samsung.android.firmware.tsp
but i dont have all of them. i only have
1 & 2
but ive also disabled
com.ws.dm
com.sec.soo.push
anything else?
I have an original Note 7, not even a replacement and its on AT&T
can i also get the links please?
Could you please send me the link too?
Could you please send me the link too?
All, how goes the updates? Must be going well since haven't seen any help posts. Oh, anyone else also notice no further SMS messages from the carrier since the OTA 60% battery Nerf was sent? That seem to suggest that the update (at least this one) was coming from the operator and not Samsung directly (ex. "check that IMEI off the SMS spam list, we already sent the OTA battery Nerf to it"). This means that ppl should make sure to include the carrier update package blocks when they use Package Disabler Pro 6.3 (and NoRoot Firewall - which really needs to be updated). As a matter of fact, can we post some carrier specific Package Disabler Pro 6.3 screen snaps of what ppl have blocked?
930a stock rom
Tangopro said:
All, how goes the updates? Must be going well since haven't seen any help posts. Oh, anyone else also notice no further SMS messages from the carrier since the OTA 60% battery Nerf was sent? That seem to suggest that the update (at least this one) was coming from the operator and not Samsung directly (ex. "check that IMEI off the SMS spam list, we already sent the OTA battery Nerf to it"). This means that ppl should make sure to include the carrier update package blocks when they use Package Disabler Pro 6.3 (and NoRoot Firewall - which really needs to be updated). As a matter of fact, can we post some carrier specific Package Disabler Pro 6.3 screen snaps of what ppl have blocked?
Click to expand...
Click to collapse
would you send me the link too please?
can i get a link sir much appreciate
I know this is an old thread, sorry. I too, however, am in need of this link. Does it still exist?
There is no 3d scanner app pre-installed in my Note 10+.
Any opinion?
Regards
SM-N975F cihazımdan Tapatalk kullanılarak gönderildi
It's not released yet
I'm looking forward to what's in store
I dont know why nobody (reviewers) is talking about this feature or why samsung isnt pushing this more by including it on the note 10. I would have loved to see them use this for their Gear VR or even their AR Emoji. Im still waiting to see a 3d print demo from a scan.
aydink_1903 said:
There is no 3d scanner app pre-installed in my Note 10+.
Any opinion?
Regards
SM-N975F cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Download it at APKMIRROR. Works fine, and I have played around with is today, scanned most of my familymembers
Rune
Note10PlussIsKing said:
Download it at APKMIRROR. Works fine, and I have played around with is today, scanned most of my familymembers
Rune
Click to expand...
Click to collapse
I downloaded. installed, but the application run button is not active. and does not appear in applications
mgkmgk said:
I downloaded. installed, but the application run button is not active. and does not appear in applications
Click to expand...
Click to collapse
Bixby vision :good:
Downlaod work
https://www.apkmirror.com/apk/samsu...se/3d-scanner-1-0-00-23-android-apk-download/
I am on the fence about this. Can anyone post some sample models. Does it allow export to OBJ or FBX format?
I tried for half an hr to get one image if didnt work well enough . It needs updates for sure .
lanxinger said:
I am on the fence about this. Can anyone post some sample models. Does it allow export to OBJ or FBX format?
Click to expand...
Click to collapse
Each 3D scan you do creates a zip file on the internal storage under 3D Scanner and inside each zip file is a .texture, .obj and .mtl file.
As said it exports an .obj file.
I have a desktop scanner andndoing some test.
Its just ok for things. Doesnt capture all the details. Kinda blobs over the scans.
Its just the tech it uses.
Would anyone mind sharing one of their scans.
Thanks!
3D scanning
lanxinger said:
I am on the fence about this. Can anyone post some sample models. Does it allow export to OBJ or FBX format?
Click to expand...
Click to collapse
I upladed my first simple test here : (cannot add direct link, since I'm a new member here) youtu.be/ZftBYpXKIRM
Scanned with Note 10 Plus, imported the model and texture to 3DSmax.
EDIT: It is .obj format
Rune
Note10PlussIsKing said:
I upladed my first simple test here : (cannot add direct link, since I'm a new member here) youtu.be/ZftBYpXKIRM
Scanned with Note 10 Plus, imported the model and texture to 3DSmax.
Rune
Click to expand...
Click to collapse
Did you get this kind of message ?
3D scanning
coolz_hari said:
Did you get this kind of message ?
Click to expand...
Click to collapse
Only when I forgets to change from "person" when scanning objects, and the other way around.
Rune
I am unable to find the app in bixby vision of my Galaxy s10. Is this Note 10 only ?
Downloaded app from apkmirror
Yes, this is only for Note 10. You are in Note category.
Odoslané z SM-N975F pomocou Tapatalku
lanxinger said:
Would anyone mind sharing one of their scans.
Thanks!
Click to expand...
Click to collapse
I made a post on facebook with link.
Here is the post
If you can get to it ill post the file link also
https://www.facebook.com/groups/mosaic.users/permalink/413568329279741/
Obj file
https://www.dropbox.com/s/24uu9h24o231zph/1566533293791.obj?dl=0
Not easy to get it works.
You can download the app from Bixby vision
Download only on your mobile browser
http://fota-secure-dn.ospserver.net/firmware/INU/SM-F926B/nspx/cb9fbd13294b441aa85428c3b3b62303.bin?px-time=61ce8b93&px-hash=3605b362f7c18da5c8c91878a90df003&px-wid=1345717-WSA211101044816&px-wctime=2021-11-01%2004:48:16&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Beta 3
http://fota-secure-dn.ospserver.net:80/firmware/INU/SM-F926B/nspx/5341a0cc07fe43d8a4dffceccd2dc424.bin?px-time=61ea54ea&px-hash=b58097536d81ac25d81f53595c8cdc8b&px-wid=4054558-WSA211122063832&px-wctime=2021-11-22%2006:38:32&px-unum=&px-nb=UGtezEZ854jbmFcvWGxLEA==
Attached the change log pdf!
Was waiting for this to come out only it will not be released in my region. Would you be able to upload the update.zip?
Ple
dreamtheater39 said:
Downloading!!!
Click to expand...
Click to collapse
dreamtheater39 said:
Downloading!!!
Click to expand...
Click to collapse
Please can you grab and share the update zip?
dreamtheater39 said:
Downloading!!!
Click to expand...
Click to collapse
I thought only for India and South Korea. My members app doesn't show enrollment for one ui 4. Will the update.zip work for US models
domineus said:
I thought only for India. My members app doesn't show enrollment for one ui 4
Click to expand...
Click to collapse
This is the process to grab the ota file
We need the links to the fold 3 F926B files if anyone can get them?
[OneUI 4.0 Beta 1 & 2](EXYNOS) Update.zip for S21 / Plus / Ultra - Download OTA Link
So, now that we have OneUI 4.0 Beta 1 rolling out to countries (ofc only 7), it has come so far in Germany & Korea (as far as I know). So the rest of the world wants an update.zip link, so don't be selfish and please, if you have one, capture the...
forum.xda-developers.com
edit - removed - thanks for the info
exocetdj said:
This is the process to capture the OTA URL - please capture and share for the community
**removed**
As long as your firmware is OXM , you can use the beta
Click to expand...
Click to collapse
Please do NOT click on the link above if you use MS Edge Browser...
The link to this page forwards you to download an "Update" to the edge browser NOT from Microsoft. This download has Malware and should NOT be clicked.
Reported.
exocetdj said:
This is the process to grab the ota file
We need the links to the fold 3 F926B files if anyone can get them?
[OneUI 4.0 Beta 1 & 2](EXYNOS) Update.zip for S21 / Plus / Ultra - Download OTA Link
So, now that we have OneUI 4.0 Beta 1 rolling out to countries (ofc only 7), it has come so far in Germany & Korea (as far as I know). So the rest of the world wants an update.zip link, so don't be selfish and please, if you have one, capture the...
forum.xda-developers.com
Click to expand...
Click to collapse
it should work on all models since there’s only snapdragon for the fold 3. But nothing on my members app.
Yet…
Talderon said:
Please do NOT click on the link above if you use MS Edge Browser...
The link to this page forwards you to download an "Update" to the edge browser NOT from Microsoft. This download has Malware and should NOT be clicked.
Reported.
Click to expand...
Click to collapse
link removed - thanks for the info
I think I am more excited about Android 12L than just the plain v12.
Talderon said:
I think I am more excited about Android 12L than just the plain v12.
Click to expand...
Click to collapse
It does sound pretty epic!
Has anyone managed to upload or found the update.zip file yet????
exocetdj said:
Ple
Please can you grab and share the update zip?
Click to expand...
Click to collapse
Unfortunately I've already upgraded to 12 beta and can't grab the zip anymore.
The biggest change I'm loving is how much slicker it is when resizing split screen apps....the apps get blurred and stretch when you resize the split handle....and slowly come back into focus with the new split layout....looks incredibly polished
dreamtheater39 said:
Unfortunately I've already upgraded to 12 beta and can't grab the zip anymore.
The biggest change I'm loving is how much slicker it is when resizing split screen apps....the apps get blurred and stretch when you resize the split handle....and slowly come back into focus with the new split layout....looks incredibly polished
Click to expand...
Click to collapse
As much as I want to cry, I can't blame ya for enjoying it Hahaha
I hope someone else is able to capture it. I have a Pixel phone and have been playing with Android 12 and LOVE it, I cannot wait to see it on the Fold.
Will the update.zip file work on any variant i am in the UK on n o2 handset. I tried to flash the unbranded firmware from Sammobile but it wouldn't take.
I had to literally swipe to the very last card to enroll for the beta on the members app. No announcement or call out....was just incredibly jobless to swipe all the way to the end to find it!
Here's a screenshot of that
dreamtheater39 said:
I had to literally swipe to the very last card to enroll for the beta on the members app. No announcement or call out....was just incredibly jobless to swipe all the way to the end to find it!
Here's a screenshot of that View attachment 5444325
Click to expand...
Click to collapse
If you get the OTA please try to capture it
The new camera interface
I checked Samsung Members several daily and I don't see it. Someone on the forums there said it wasn't out for the US.
I bought a phone off Ebay & everything was working just fine till I did a factory reset. Now, it’s stuck in demo mode. I can’t even power it off cause it asks me for some kind of code. Can you help me plz?
Ugh. The only thing that I saw was this post about the TCL 10 Pro in a similar mode:
TCL 10 Pro demo remove?
Any update on this would be great facing the same issue...
forum.xda-developers.com
jrevans said:
Ugh. The only thing that I saw was this post about the TCL 10 Pro in a similar mode:
TCL 10 Pro demo remove?
Any update on this would be great facing the same issue...
forum.xda-developers.com
Click to expand...
Click to collapse
whats the solution?
jrevans said:
Ugh. The only thing that I saw was this post about the TCL 10 Pro in a similar mode:
TCL 10 Pro demo remove?
Any update on this would be great facing the same issue...
forum.xda-developers.com
Click to expand...
Click to collapse
Nevermind. The seller of the phone gave me the TCL code to switch it over to owner use.
mbudden89 said:
Nevermind. The seller of the phone gave me the TCL code to switch it over to owner use.
Click to expand...
Click to collapse
Does it work with all tcl20 pro 5g? Im having the same issue and not finding a solution anywhere.
mbudden89 said:
Nevermind. The seller of the phone gave me the TCL code to switch it over to owner use.
Click to expand...
Click to collapse
Where do you enter this code??
bowss47 said:
Does it work with all tcl20 pro 5g? Im having the same issue and not finding a solution anywhere.
Click to expand...
Click to collapse
I don't know
bowss47 said:
Where do you enter this code??
Click to expand...
Click to collapse
Try this:
An app called Demo will appear in your apps. Locate and open the app. Click Ok,
and then Activate. The password for TCL is 852618. After you enter the password
it will say switching to the owner. Once done loading, simply click exit in the top
corner or close the app.
I don't know if the same code works for all TCL 20 Pro phones, but you can try it out anyways.
mbudden89 said:
Try this:
An app called Demo will appear in your apps. Locate and open the app. Click Ok,
and then Activate. The password for TCL is 852618. After you enter the password
it will say switching to the owner. Once done loading, simply click exit in the top
corner or close the app.
I don't know if the same code works for all TCL 20 Pro phones, but you can try it out anyways.
Click to expand...
Click to collapse
Oh man, Much love brother!! This phone was thrown to the side for over a year, and I tried many different ways including the ADB commands way, but nothing worked (with ADB method, I couldn't unlock developer settings). Thanks a lot!
mbudden89 said:
Try this:
An app called Demo will appear in your apps. Locate and open the app. Click Ok,
and then Activate. The password for TCL is 852618. After you enter the password
it will say switching to the owner. Once done loading, simply click exit in the top
corner or close the app.
I don't know if the same code works for all TCL 20 Pro phones, but you can try it out anyways.
Click to expand...
Click to collapse
I just bought one of these to replace a Galaxy S8 that had outlived it's usefulness. This post may save me plenty of hassle in the future *saves post*.