I've been trying to stock flash my Xperia XZ2 with the flasher tool by Androxyde.
However, when I want to bundle my created FTF file, I can't find my device in the Bundler.
When I start up the Sony Mobile Flasher, it lists 64 devices. I found in another thread that they had around 94 devices listed. When I look for the Androxyde thread on... github?... I can see my device family listed there (Mine is a H2896, so H82XX would work), but sadly it's nowhere to be found how I can add the file manually. I tried syncing, but restarting the software, my pc and then syncing again several times did not help.
I managed to export (Devices > Manage > Export) a device profile of a device that is present in the Bundler/Device list. That yielded an .ftd file... But sadly nowhere I can find an ftd file for my device family...
So I really hope someone could help me out, since I'm stuck with a bricked phone (thank you, Xperia Companion).
Thank you for letting me vent my frustrations! x
I found the solution myself!! :laugh:
For any future Sony Mobile Flasher user - here's how you can add a device yourself.
Mind you, I did this on a Windows PC. I don't know where exactly the folders are in MacOS.
Go to the devices page for the Androxyde Flashtool on Github
See if your device model is there and if there is a <model name>.properties file in that folder. Download that .properties file. (mine was called H82XX.properties)
Locate the /.flashTool/ folder on your system
Then go to the 'devices' folder
Make a folder with the model name of your smartphone model. In my case, the Xperia XZ2, it was H82XX
Place the <model name>.properties file in this folder
Manually sync in Flashtool
Now close and reopen Flashtool - it should have added one extra model
With these steps, you should now be able to download the firmware through Xperifirm, and in Flashtool, you can finally select your model in order to bundle the unpacked/decrypted firmware files.
Good luck!
Junior
Why dont my flashtool have "devices" folder? i downloaded the newest one. I only have Custom,drivers,10xflasher.lib that's all :crying:
Related
Hi everyone
I had xperia arc with firmware version 4.0.2.A.0.42 I flush it with wotanclient with 4.0.A.2.368 version so that I can install the honeycomb theme which didn't work for me in the previous version all worked good
I installed honeycomb theme in the recovery mode and result Good
I did I system update from the update menu to 4.0.2.A.0.42 version to see if this will work with honeycomb theme, but unfortunately my xperia no longer power on and I can't get access to fastboot mode
I tried flushing with 4.0.A.2.368 version but doesn't work no more
Please help
U burn the phone
Sent from my GT-I9100 using xda premium
Are you serious ???
Please help can anybody tell me if my phone will work again !!!!!
Yes Your Phone Will Work Again
Dont Worry The Same Thing Happened To Me With My Pro And There Is A Way To Fix It I Will Find It And Be Back In 3 Minutes With An Answer
Ok I Am Back And Found Some Instructions I Have a Way To Do It But These Seem Simpler Than Mine.
Hi all,
So you have unlocked the bootloader of your Xperia Pro MK16a/i and rooted it too.. You got a notification for a newer software to be available and you downloaded an over the air update, installed it, the phone says that it needs a reboot and to your surprise the phone doesn't turn on.
The symptoms for this problem are:
1. The phone vibrates for half a second when you press the power button and does that in a never ending loop
2. The green led keeps blinking when you press the power button.
This is not some method that i had developed but i just found a thread in a Japanese website and after struggling with the google/microsoft translation, i thought it would be better to help all the other users and not face all the struggles that i went through.
How to bring your phone back to life without the help of a Sony Ericsson service center? Keep reading.
Things that you need to have/check before beginning the process.
1. An Xperia Pro MK16a/i with the symptoms mentioned above
2. A USB cable
3. Flashtool
4. SEUS Software (which has been used for at least once for your phone)
5. Patience
First off, just rush to the SEUS installation folder in your PC to this path
C:\Program Files\Sony Ericsson\Update Service\db\13740270\blob_fs
Look for a file named FILE_278020564 in that folder.
If yes, continue reading.
If no, i'm not sure if the files from other users work. Experts need to help regarding this matter.
Copy the file FILE_278020564 to any location that you wish
Download the software ConvertTool and copy and place the file FILE_278020564 into the ConvertTool folder and then drag and drop the file onto the file SeusDecrypt.bat
A .tgz archive of the FILE_278020564 will be made in the same folder. Now extract the .tgz archive created (Use 7zip archiver to extract the file)
A .tar file will be created now. Now rename that file as loader.sin
Now Extract the file Xperia Pro Relock bootloader.zip to another location and copy and replace the loader.sin file in the folder with the loader.sin that you just renamed.
Now its time to repackage the file so that it can be flashed onto your phone.
Download and install Flashtool software (you can easily find it, just Google it) and in the software go to Advanced>Bundle creation
Now select the folder Xperia Pro Relock bootloader, you'll be able to view the two files (loader.sin and preset.ta) in the folder list of Flashtool software.
Select each file and then click on the -> to move the files into Firmware Content, type in the details in the tabs above.
Device: MK16a (or) i [whichever phone yours is]
Version: 4.0
Branding: A.2.335 [Don't ask me why we need to type in these details because i do not know, experts can help if its not mandatory]
Click on Ok in the flashtool software and a .ftf file would now be created in the path shown below
C:\Flashtool\firmwares
Example: MK16a_4.0_A.2.335.ftf
Now Open the Flashtool software once again and click on the Flash icon and enter into Flashmode and the software lists out the firmwares in the firmwares folder of its installation. Select the file MK16a_4.0_A.2.335.ftf and then leave everything as default and press OK.
Do as the software asks you to do.
1. Unplug the device
2. Power off the device
3. Press the back button and hold it
4. Plug the USB cable.
The software shall recognize the phone and flash the relocked bootloader into the phone file system. The phone would not work now.
For the phone to work, you need to update your phone normally using SEUS and it would let you do an update without any The phone software has been modified and cannot be updated error. (I would prefer a Factory settings+Update mode of update)
Note: In case the flashtool doesn't detect your phone, you need to install PC companion software in your PC. Hopefully it installs the USB drivers necessary to detect your phone.
After the update is done, restart the phone and it should normally boot like it was in the box when you bought. Happy Ending..
This method is not mine and all credits goes to Mydroidn.
update service folder
Thank you my friend for the help
But I can't find the update service folder in Sony Ericsson folder
Back agaaaain
http://forum.xda-developers.com/showthread.php?t=1126358
Thank you FreeXperia
You're the best
Im glad u fix it
Sent from my GT-I9100 using xda premium
As the title says, my flashtool (0.9.10.1) isn't able to find the "R800i_4.0.2.A.0.42_Generic.ftf" file. Of course I installed the needed drivers.
Once I was able to downgrade to .42 but that was a long while ago.
I tried already these things:
Reinstall Flashtool
Install on another partition
Search for another ftf file (it's everywhere the same)
Viewed ****tons of manuals/videos
Does anyone knows what I could do?
Try using this tool. .42 firmware is available through this:
http://forum.xda-developers.com/showthread.php?p=40443742
Thanks to ozzmanj1 for posting about it
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
same issue here and the link that appears as a solution does no work on my case
gaizka71 said:
same issue here and the link that appears as a solution does no work on my case
Click to expand...
Click to collapse
That link is for unlocked bootloader, and you are probably on locked bootloader.
Just us PC Companion to flash stock firmware.
Or find find out why flashtool can't flash stock firmware. Possible reasons - solutions
-not in flash mode - power off phone, while keeping pressed back buton plug usb to PC
-bad download - redownload
-bad file - download from other source
-Flashtool can't read path of downloaded file (special letters in directory's path) - place file in C:/ or D;/
-unknow errors - start flashtool with admin rights
-phone not recognized - bad drivers, use drivers from flashtool folder
Solution
I had the same problem, where only 4.0.2.A.0.42 Global would not show up in the Flashtool ftf list. Version 0.62 or 0.42 CN would show up fine.
I used the firmware from this page: http://forum.xda-developers.com/showthread.php?t=1477440
Using an older version of Flashtool (flashtool 0.6.9.1) resolved the problem for me (http://www.4shared.com/file/-rYqPPug/flashtool-0691-windows.html).
You could file a bugreport with the Flashtool developers.
marcovtwout said:
I had the same problem, where only 4.0.2.A.0.42 Global would not show up in the Flashtool ftf list. Version 0.62 or 0.42 CN would show up fine.
I used the firmware from this page: http://forum.xda-developers.com/showthread.php?t=1477440
Using an older version of Flashtool (flashtool 0.6.9.1) resolved the problem for me (http://www.4shared.com/file/-rYqPPug/flashtool-0691-windows.html).
You could file a bugreport with the Flashtool developers.
Click to expand...
Click to collapse
Thanks a lot man! perfect solution.
i have an alcatel pop d3 and i am trying to restore it using sp flashtool
but when i load my scatter file only boot img and recovery img is found help please
I installed flashtool 0.9.22.3 and everything is ok but it doesn't show up the ftf file to flash it is in the .flashtool>firmware folder plz help me
zabitkha said:
I installed flashtool 0.9.22.3 and everything is ok but it doesn't show up the ftf file to flash it is in the .flashtool>firmware folder plz help me
Click to expand...
Click to collapse
Same her tng Flash Kernal On My X8 An It Wont Show The File At All :crying:
zabitkha said:
I installed flashtool 0.9.22.3 and everything is ok but it doesn't show up the ftf file to flash it is in the .flashtool>firmware folder plz help me
Click to expand...
Click to collapse
john_cena163 said:
Same her tng Flash Kernal On My X8 An It Wont Show The File At All :crying:
Click to expand...
Click to collapse
I solved the problem by manually let the FlashTool sync the devices databases from Github
1 - Connect to the internet
2- From FlashTool > Devices > Device Sync > Manual Sync
3- after it's done syncing close FlashTool and open it again..
4- it should say loaded ninety something devices (in my case 94)
5- choose flash > flashmode and choose a folder that contains any correct FTF (not corrupted FTF file) whatever the names of the files are..
you should now have your device(s) listed in the Firmwares box with the FTF files after expanding the device name..
Have a good flashing
Dr.TheMaster said:
I solved the problem by manually let the FlashTool sync the devices databases from Github
1 - Connect to the internet
2- From FlashTool > Devices > Device Sync > Manual Sync
3- after it's done syncing close FlashTool and open it again..
4- it should say loaded ninety something devices (in my case 94)
5- choose flash > flashmode and choose a folder that contains any correct FTF (not corrupted FTF file) whatever the names of the files are..
you should now have your device(s) listed in the Firmwares box with the FTF files after expanding the device name..
Have a good flashing
Click to expand...
Click to collapse
Had the same problem. Confirmed this works. Thanks!
Friends, I'm there one week direct non-stop trying to root on my Sony Xperia T3 (D5106) 18.1.A.2.25 version, do not know what else to do, I've tried all the tutorials xda forum .. all give error .. when I give in flash D5103 model, error appears here, my T3 only works on the D5106 model .. How do I get to root on my Xperia T3 D5106 ??? For God's sake = ( :crying:
You can follow the tutorials found in other threads like http://forum.xda-developers.com/xperia-t3/help/how-to-root-xperia-t3-18-1-2-25-t3007487 or http://help.howproblemsolution.com/1377446/tutorial-root-xperia-t3-firmware-18-1-a-2-25 that show how to root a D5103. It works altough your phone will complain at startup that you have the wrong version (but it still works). To circunvent this you must flash an ftf file for the D5106. If you don´t find one you can generate your own ftf with flashtool, that should be installed in c:\flashtool.
1) start flashtool and go to Devices/Check Updates. Double click on D510X then click on D5106 tab. If you find the brand of your phone, double click it and flashtool will start downloading. If you don´t find your brand, you can add it to the list in flashtool\devices\D510X\D5106\custlist.properties. In my case I added 1 line with "1286-6141=AMERICAS-LTE" without the quotes. You find this information about your phone in C:\program data\Sony\Sony PC Companion\<youremei>\default-capability.xml , almost at the end under <filesystem> <productnumber> and <cdf> <productnumber>.
Save custlist.properties and you will see your brand in flashtool. Be patient waiting for download - it will bring almost 1 GB.
2) when download is finished, flashtool will automatically decrypt the filesets and open the "Bundler". There you should mark the whole folder list and move it to the right to the "firmware content". Now you can click on "create" and your ftf will be generated in the firmwares folder.
If the process ends successfully you will have generated an ftf and a torrent file.
Follow the steps in the tutorial to flash the .14 firmware, run the rootkit to root your device and use your generated ftf to flash the .25 firmware. Flash only the Kernel and unmark the wipe Data in flashtool.
I hope this helps, since it worked for me. happy flashing
Hey @low-rider, your method worked perfectly on my D5106 Thanks:good:
anyone can help me to root my xperia t3?
What model T3 do you have?
low-rider said:
You can follow the tutorials found in other threads like http://forum.xda-developers.com/xperia-t3/help/how-to-root-xperia-t3-18-1-2-25-t3007487 or http://help.howproblemsolution.com/1377446/tutorial-root-xperia-t3-firmware-18-1-a-2-25 that show how to root a D5103. It works altough your phone will complain at startup that you have the wrong version (but it still works). To circunvent this you must flash an ftf file for the D5106. If you don´t find one you can generate your own ftf with flashtool, that should be installed in c:\flashtool.
1) start flashtool and go to Devices/Check Updates. Double click on D510X then click on D5106 tab. If you find the brand of your phone, double click it and flashtool will start downloading. If you don´t find your brand, you can add it to the list in flashtool\devices\D510X\D5106\custlist.properties. In my case I added 1 line with "1286-6141=AMERICAS-LTE" without the quotes. You find this information about your phone in C:\program data\Sony\Sony PC Companion\<youremei>\default-capability.xml , almost at the end under <filesystem> <productnumber> and <cdf> <productnumber>.
Save custlist.properties and you will see your brand in flashtool. Be patient waiting for download - it will bring almost 1 GB.
2) when download is finished, flashtool will automatically decrypt the filesets and open the "Bundler". There you should mark the whole folder list and move it to the right to the "firmware content". Now you can click on "create" and your ftf will be generated in the firmwares folder.
If the process ends successfully you will have generated an ftf and a torrent file.
Follow the steps in the tutorial to flash the .14 firmware, run the rootkit to root your device and use your generated ftf to flash the .25 firmware. Flash only the Kernel and unmark the wipe Data in flashtool.
I hope this helps, since it worked for me. happy flashing
Click to expand...
Click to collapse
hello my friend,
i have de Xperia T3 D5106, and the last Flash tool. i don't kwon how creted the tft file.
Which folder files i have to move to the firmware content? to them Created,
Please help me
MDC413I said:
hello my friend,
i have de Xperia T3 D5106, and the last Flash tool. i don't kwon how creted the tft file.
Which folder files i have to move to the firmware content? to them Created,
Please help me
Click to expand...
Click to collapse
"C:\Users\(username)\.flashTool\firmwares"
Hi,
i would like to know if there is any way to flash a ftf file yet?
With the latest Flashtool 0.9.23.2 you can already download the roms for XA1 but you cannot create a ftf file, because the device is not listed yet.
I found some ftf .files on the net but i can't flash them also with flashtool. the firmware is not listed. if i use a older version of flashtool, the firmware is listed,
but when i want flash the file, it's says no loader for the device has been found.
i have a branded firmware, and would like to flash a unbranded version of the firmware.
if i use xperia companion, i only can flash the same branded version.
i tried to trick the xperia companion, the software loading the firmware files in the background if using software repair.
i tried to replace the file with the ones downloaded with flashtool/xperifirm, but it won't work.
i
Yes. download newflasher tool from my signature
It is now. Since today or for some days, but I checked today. Already started creating ftfs for my forum.
Hello friends i can not flash stock firmware on G3223 is there a way? I have custom recovery but i erase system to have a clean installation but flasher from androxyde dosent work nor munjeni one. Any advise? I have the stock ftf Thanks
jotade said:
Hello friends i can not flash stock firmware on G3223 is there a way? I have custom recovery but i erase system to have a clean installation but flasher from androxyde dosent work nor munjeni one. Any advise? I have the stock ftf Thanks
Click to expand...
Click to collapse
Hello mate I have had that issue and it was resolved by using a fresh download of xperiafirm (via it built in button on flash tool) then click yes to use script!!
@jotade
You need add support for XA1 Ultra to Flashtool. Download this: https://drive.google.com/open?id=0B7UqjtcLWyHOMDhGTjlJLW15TlE, than unpack it. Start Flashtool and uncheck AutoSync (Devices -> Device Sync -> Auto Sync -> Off). After that copy unpacked G32XX folder into /Flashtool/devices folder.
Than You can create and flash the firmware on Your device.
There are modded by me XA1 .properties and .fsc files to match Ultra (second one has only name changed to match fws' name).
ch3mn3y said:
@jotade
You need add support for XA1 Ultra to Flashtool. Download this: https://drive.google.com/open?id=0B7UqjtcLWyHOMDhGTjlJLW15TlE, than unpack it. Start Flashtool and uncheck AutoSync (Devices -> Device Sync -> Auto Sync -> Off). After that copy unpacked G32XX folder into /Flashtool/devices folder.
Than You can create and flash the firmware on Your device.
There are modded by me XA1 .properties and .fsc files to match Ultra (second one has only name changed to match fws' name).
Click to expand...
Click to collapse
Thanks my friend but i already flash and root whitout doing that. Everything is great know. ROOT is the best
Hi guys, I've been poking around on here for the first time in many years..
Are you guys telling me that I can get a stock .ftf for my XA1 Ultra (G3221) via flash tool, if I first update flash tool into something that @munjeni maintains? Also, this new flashtool runs in x64 Ubuntu 16.04?
I would like to unpack the stock ftf, tweak it for root, repack it and flash it with flashtool - having first tried the stock ftf. I've done this before a while ago.
So far with the G3221 I unlocked the bootloader, and that's it. There are many adverts on this site on a smartphone, and it makes searching these forums difficult so I've struggled to find out what I need. Your guidance would be appreciated.
You can use both Flashtool (not sure if it supports Ultra already, but I attached, few post back, neede files to add support) and Xflasher. Both will flash the stock fine. Both works fine on Linux.
However You cannot flash modded stock using this apps. There is no way to repack it to .sins and than .ftf to make it seen and flashable by any of this 2 apps. It was possible with X10, but XA1 is not X10...
Only way to flash modded rom i use recovery. If Im right there is TWRP for XA1 Ultra already.
Sent using XT1562 - Resurrection Remix/Optimus Kernel
ERROR - Error flashing. Aborted
ch3mn3y said:
@jotade
You need add support for XA1 Ultra to Flashtool. Download this: url, than unpack it. Start Flashtool and uncheck AutoSync (Devices -> Device Sync -> Auto Sync -> Off). After that copy unpacked G32XX folder into /Flashtool/devices folder.
Than You can create and flash the firmware on Your device.
There are modded by me XA1 .properties and .fsc files to match Ultra (second one has only name changed to match fws' name).
Click to expand...
Click to collapse
Flashtool needs "loader.sin", but it isn't included in the folder you provided. Any idea what to do?
user845 said:
Flashtool needs "loader.sin", but it isn't included in the folder you provided. Any idea what to do?
Click to expand...
Click to collapse
It's not needed. It was with older devices, but not XA1.
ZUK Z2 Pro ✓ᵛᵉʳᶦᶠᶦᵉᵈ
Hello
Yesterday I tried (Xperia XZ2 Compact H8324) to flash on the new Android 9.
My device was built in Hong Kong.
I went like this:
First I downloaded the current German Android 9 Stock Rome via Xperifirm. H8324_Customized DE_1313-6204_52.0.A.3.84_R2B
Before the flash, I created the * .ftf file in flash tool 0.9.25.0, as shown in a Youtube video. The whole thing worked fine.
Then I put my device into Flash mode and integrated the latest drivers into my PC.
Before I could start the flash process, I had to move the *. Fsc script from the folder "devices \ H83XX" in the folder "my devices" and rename in the current firmware. Since he gave me the message when starting the flash process that no update script would be available.
Then the flash process started asking if he should skip certain things stored in the script. Of course I confirmed that.
The flash process ran without any further error message and ended with the message that the flash was successful.
However, after starting the Xperia, the message "Your device is corrupted - it can not be trusted" was displayed. The device shuts down after 5 seconds.
Fortunately, I was able to recover my original firmware through the PC Companion.
Can someone tell me where I might have made a mistake on the way and how can I fix this? I would like to have Android 9, but that has not arrived in Hong Kong yet.
This is my first tutorial, hope you enjoy it and take you further.
Thank you first to juandiazmora
So you get Android 9 on your smartphone without any regional restrictions.
The following programs are required: Xperifirm, flashtool 0.9.25.0
1. Download the Rome at Xperifirm which is compatible with your device and you want it. For me, the firmware was unpacked directly by Xperifirm otherwise uses Flashtool Tools> Bundles> FILESET Decrypt
!!! Important with the downloaded files the "fwinfo.xml delete" !!!
2. In the Flash tool go to Tools> Bundles> Create
2.1 There you choose the folder in which the firmware is located.
2.2 Then select your device at Device.
2.3 When branding enter your country version. In my case Germany.
2.4 In version your firmware version you want to install.
2.5 Now important and careful. With folders list you add all files except * .ta files to the firmware content.
2.6 Then click Create and wait.
3. Adapt Flashtool. Go to the folders "Users" \ flashTool \ devices \ H82XX and the
"User". \ Flash tool \ devices \ H83XX
3.1 Copies the 52.fsc from the H82XX to the H83XX
Deletes the 51.1.fsc
3.2 Then copy the complete folder H83XX into the folder "User" \. FlashTool \ mydevices
4. Connect the mobile phone in Flash mode to the PC. Do not forget to install the appropriate driver. Flashtool also provides drivers and Xperia Companion.
4.1 If everything is ready then go to step 5.
*
5. Flashing
5.1 Click on the flash symbol in the flash tool.
5.2 Select flash mode
5.3 For Source folder, select the folder with the previously created firmware file in * .ftf.
5.4 Select Device for Device Filter.
5.5 At Firmwares, select your created firmware.
5.6 For Wipe Sin, select APPSLOG / USERDATA
5.7 Select Disable final verification.
5.8 Flash
6. When flashing, he asks if he should use the 52.fsc.
Simply confirm everything then works well.
For me it all worked out but of course I take no guarantees. Everything at your own risk.
Double that. I havent flashed pie too, requesting a little guide how to do it properly to have full stock firmware.
I think you should use a fsc for 52 firmware, not just remane the 51.1. On github page is available the data for create that specific file. Also you can use xperifirm to download the firmware easily and safely
52.fsc
juandiazmora said:
I think you should use a fsc for 52 firmware, not just remane the 51.1. On github page is available the data for create that specific file. Also you can use xperifirm to download the firmware easily and safely
Click to expand...
Click to collapse
Hi, I need help on the flashscript thingie.
Don't have a clue where to get it from.
Thanks in advance.
I'm with Customized CE1 in my H8314 and I'm still in Oreo. It would be possible do this steps with my same firmware without doing wipe? Only deleting the country restricion.
Regards
Why can't we just flash using the downloaded and unpacked firmware from Xperiafirm? Why this need to exclude some specific .ta files and disable final verification checks?
Quarzkopf said:
Hello
Yesterday I tried (Xperia XZ2 Compact H8324) to flash on the new Android 9.
My device was built in Hong Kong.
I went like this:
First I downloaded the current German Android 9 Stock Rome via Xperifirm. H8324_Customized DE_1313-6204_52.0.A.3.84_R2B
Before the flash, I created the * .ftf file in flash tool 0.9.25.0, as shown in a Youtube video. The whole thing worked fine.
Then I put my device into Flash mode and integrated the latest drivers into my PC.
Before I could start the flash process, I had to move the *. Fsc script from the folder "devices \ H83XX" in the folder "my devices" and rename in the current firmware. Since he gave me the message when starting the flash process that no update script would be available.
Then the flash process started asking if he should skip certain things stored in the script. Of course I confirmed that.
The flash process ran without any further error message and ended with the message that the flash was successful.
However, after starting the Xperia, the message "Your device is corrupted - it can not be trusted" was displayed. The device shuts down after 5 seconds.
Fortunately, I was able to recover my original firmware through the PC Companion.
Can someone tell me where I might have made a mistake on the way and how can I fix this? I would like to have Android 9, but that has not arrived in Hong Kong yet.
This is my first tutorial, hope you enjoy it and take you further.
Thank you first to juandiazmora
So you get Android 9 on your smartphone without any regional restrictions.
The following programs are required: Xperifirm, flashtool 0.9.25.0
1. Download the Rome at Xperifirm which is compatible with your device and you want it. For me, the firmware was unpacked directly by Xperifirm otherwise uses Flashtool Tools> Bundles> FILESET Decrypt
!!! Important with the downloaded files the "fwinfo.xml delete" !!!
2. In the Flash tool go to Tools> Bundles> Create
2.1 There you choose the folder in which the firmware is located.
2.2 Then select your device at Device.
2.3 When branding enter your country version. In my case Germany.
2.4 In version your firmware version you want to install.
2.5 Now important and careful. With folders list you add all files except * .ta files to the firmware content.
2.6 Then click Create and wait.
3. Adapt Flashtool. Go to the folders "Users" \ flashTool \ devices \ H82XX and the
"User". \ Flash tool \ devices \ H83XX
3.1 Copies the 52.fsc from the H82XX to the H83XX
Deletes the 51.1.fsc
3.2 Then copy the complete folder H83XX into the folder "User" \. FlashTool \ mydevices
4. Connect the mobile phone in Flash mode to the PC. Do not forget to install the appropriate driver. Flashtool also provides drivers and Xperia Companion.
4.1 If everything is ready then go to step 5.
*
5. Flashing
5.1 Click on the flash symbol in the flash tool.
5.2 Select flash mode
5.3 For Source folder, select the folder with the previously created firmware file in * .ftf.
5.4 Select Device for Device Filter.
5.5 At Firmwares, select your created firmware.
5.6 For Wipe Sin, select APPSLOG / USERDATA
5.7 Select Disable final verification.
5.8 Flash
6. When flashing, he asks if he should use the 52.fsc.
Simply confirm everything then works well.
For me it all worked out but of course I take no guarantees. Everything at your own risk.
Click to expand...
Click to collapse
@Quarzkopf I know this thread is a bit old but I ran into similar "Your device is corrupted..." error when trying to flash US customization to my UK Xperia 1 ii. I was wondering how you got resolved this to a clean flash without this error at the end? Wasn't clear from instructions. Much appreciate your help