Develop Bugs

JellyTime Opinions

Hello!
Im wondering about JellyTime, Is it good or bad/very buggy?
Since im very intrested about it i want others opinion.
Also im new to this rooting and new ROM installs.
Thanks!

Well, it is a beta Rom, so it will have bugs. I use it as my main rom knowing it has some minor flaws. If you need a full running device you might want to read the thread a little before flashing this. Most of us flashing this are "Flashaholics" and don't mind flashing a new version everyday if needed. I'd say flash it to see what it's like, and then make your own decision. Only you will know if you like it. This goes for any Rom.
Edit:
Welcome to the forum!

TheJokah said:
Well, it is a beta Rom, so it will have bugs. I use it as my main rom knowing it has some minor flaws. If you need a full running device you might want to read the thread a little before flashing this. Most of us flashing this are "Flashaholics" and don't mind flashing a new version everyday if needed. I'd say flash it to see what it's like, and then make your own decision. Only you will know if you like it. This goes for any Rom.
Edit:
Welcome to the forum!
Click to expand...
Click to collapse
Ohhh okay ^^ is it possible to install the rom at the sametime as i root? sorreh im newb at this :3:highfive:

After you root, make a backup of your rom. Before flashing (download rom to sd card-remember where it was stored), reboot in recovery.
Wipe data/factory reset.
Wipe dalvik.
Format all partitions (except sd card).
Install from sd card.
Flash rom (search for the download)
Reboot.
The above is sorta the correct way of doing it afterwards. Most of us don't do it.
Wait 5-10 minutes.
Reboot.
Configure all you need to configure.
Install your apps.
Reboot.
If you want to know the issues of a rom, read the op(first page) and read the last 5-10 pages.
All ics - jb roms have bugs. Won't be long till they are fixed.
Gb roms are stable on the most part.
Search for 4ext touch recovery, it's the prefered one.
Sent from a dream.

TheJokah said:
Well, it is a beta Rom, so it will have bugs. I use it as my main rom knowing it has some minor flaws. If you need a full running device you might want to read the thread a little before flashing this. Most of us flashing this are "Flashaholics" and don't mind flashing a new version everyday if needed. I'd say flash it to see what it's like, and then make your own decision. Only you will know if you like it. This goes for any Rom.
Edit:
Welcome to the forum!
Click to expand...
Click to collapse
Teichopsia said:
After you root, make a backup of your rom. Before flashing (download rom to sd card-remember where it was stored), reboot in recovery.
Wipe data/factory reset.
Wipe dalvik.
Format all partitions (except sd card).
Install from sd card.
Flash rom (search for the download)
Reboot.
The above is sorta the correct way of doing it afterwards. Most of us don't do it.
Wait 5-10 minutes.
Reboot.
Configure all you need to configure.
Install your apps.
Reboot.
If you want to know the issues of a rom, read the op(first page) and read the last 5-10 pages.
All ics - jb roms have bugs. Won't be long till they are fixed.
Gb roms are stable on the most part.
Search for 4ext touch recovery, it's the prefered one.
Sent from a dream.
Click to expand...
Click to collapse
Ive installed JellyTime but when ive installed the rom it just says loading and is keeping to load. nothing happens for 20 mins.
any idéa what can cause this?

Valentia007 said:
Ive installed JellyTime but when ive installed the rom it just says loading and is keeping to load. nothing happens for 20 mins.
any idéa what can cause this?
Click to expand...
Click to collapse
Either a bad download or a bad wipe procedure.
Sent from a dream.

Teichopsia said:
Either a bad download or a bad wipe procedure.
Sent from a dream.
Click to expand...
Click to collapse
I got it to work now, BUT how do i get google play? <.< ive downloaded it but it dont work.. so how do i get to my Paid apps?
Edit: Also IF i want to have my old HTC Rom do i just use the Root program again? or do i have to download it from their site?

Valentia007 said:
I got it to work now, BUT how do i get google play? <.< ive downloaded it but it dont work.. so how do i get to my Paid apps?
Click to expand...
Click to collapse
Alright buddy, last one. After this you nees to start reading and searching for your own answers. Almost anything you can think of has already been posted.
It's called gapps. It's a zip file with several google apps. Flash the same as when you flash a rom. No wipe necessary.
Sent from a dream.

Teichopsia said:
Alright buddy, last one. After this you nees to start reading and searching for your own answers. Almost anything you can think of has already been posted.
It's called gapps. It's a zip file with several google apps. Flash the same as when you flash a rom. No wipe necessary.
Sent from a dream.
Click to expand...
Click to collapse
Okay thanks for all the help man! appreciate it
I tried to install it the same tho but it says the Zip file dont exists. But ill figure this one out

Valentia007 said:
Okay thanks for all the help man! appreciate it
I tried to install it the same tho but it says the Zip file dont exists. But ill figure this one out
Click to expand...
Click to collapse
If you have problems just pm (private message) me.
Sent from a dream.

Teichopsia said:
If you have problems just pm (private message) me.
Sent from a dream.
Click to expand...
Click to collapse
Thanks man ive sorted it out tho :3 thanks for all the help ^^

jellytime is moving very fast towards stability...
Even now its beta 110 could be used as a daily driver if you ignore some minor things..Bluetooth is the only major problem in it..other than that,it is smooth and really good

TOTAL NOOB here been reading for months now [in the background] and just joined as i think ive finally worked up the courage to brick my HD. :laugh:
I did see a question asking about "best roms" am after an easy stable and fully working combination tho, would love jellybean and fully understand its still in beta. I think more noobs would attempt stuff if it wasnt so damn confusing with regards options and bolt ons.

Ive been Useing JellyTime since yesterday and i love it, the only complaint i have at this moment is that when i lock the screen and unlock it after more than 5 min it takes up to 5-10 seconds for it to start. Maby fixed in new Beta 10. ill try install it later today or tomorrow.

Jimpy0 said:
TOTAL NOOB here been reading for months now [in the background] and just joined as i think ive finally worked up the courage to brick my HD. :laugh:
I did see a question asking about "best roms" am after an easy stable and fully working combination tho, would love jellybean and fully understand its still in beta. I think more noobs would attempt stuff if it wasnt so damn confusing with regards options and bolt ons.
Click to expand...
Click to collapse
The Desire HD/Inspire 4G are virtually un-brickable as long as you are not ENG-OFF. Once you start flashing roms it all will become like second nature. Everything will start to get easier(more confidence comes too ) Just keep doing what you are doing (reading the threads). I wish some people did this more before posting.

Valentia007 said:
Ive been Useing JellyTime since yesterday and i love it, the only complaint i have at this moment is that when i lock the screen and unlock it after more than 5 min it takes up to 5-10 seconds for it to start. Maby fixed in new Beta 10. ill try install it later today or tomorrow.
Click to expand...
Click to collapse
This is kernel related issue..also found in virtuous infinity sense 4 rom..
Bluetooth also is broken in beta 10..I still miss the smoothness of beta 7..that kinnda smoothness is yet to be seen on this new kernel

saeedyasir91 said:
This is kernel related issue..also found in virtuous infinity sense 4 rom..
Bluetooth also is broken in beta 10..I still miss the smoothness of beta 7..that kinnda smoothness is yet to be seen on this new kernel
Click to expand...
Click to collapse
One of the fun things tho is that when i have my headset in my phone the "lock screen" is opening as soon i press the button, and without the headset it takes 5-10 seconds like i posted earlier :3

1st step grabbed h/kit - more reading :cyclops:
just a quickie as well do i need to do the catchpa thing everytime i post ?

Jimpy0 said:
1st step grabbed h/kit - more reading :cyclops:
just a quickie as well do i need to do the catchpa thing everytime i post ?
Click to expand...
Click to collapse
You need to use catchpa for about the first 10 posts. then it should disapear.

This ROM is outstanding. I started with Beta 8 and it was great–at least for the first few days before Beta 9 came out. And now that Beta 10 is out, I'm going to flash that ASAP.
Then great thing about this ROM is that Randomblame just can't seem to give himself any downtime, although he does find time to spend with his family. As long as the ROM works and he isn't going crazy from it, that's alright with me.
Sent using Jelly Time: Sweet, Sugary Goodness!

SOLVED Please, help... NFC turns on and off continusly... (ViperOS)

Hi,
Until yesterday i had LineageOS and everything worked fine.
I installed ViperOS and everything ok too, but without root. But then i made a new installation with superSU this time, and I dont know why NFC turns on and off constantly, even the menu settings that normally shows NFC is gone, I can see NFC state just in quick settings.
I dont think that is ViperOS rom problem, because nobody reported that issue.
I made the wipes cache, davilk, data and system few times, and problem continues. Plus, there are more things that continue from previous installations, and I dont know why because i made clean installations. For ex. it asks for patron before start android always after making clean installations...
Because of that, i think that for everything back to normal state, maybe there is a way to make wipes deeply that i dont know... also for NFC come to normal work, is that so?
Please, give me any help... Thanks

I solved it doing this:
I have installed rom stock by twrp, next one:
https://forum.xda-developers.com/mot...l-sim-t3620551
Then i installed ViperOS. NFC is working ok again.
Regards

xuncall said:
I solved it doing this:
I have installed rom stock by twrp, next one:
https://forum.xda-developers.com/mot...l-sim-t3620551
Then i installed ViperOS. NFC is working ok again.
Regards
Click to expand...
Click to collapse
Glad to hear you solved your issue, but your question should have been in the Viper OS thread.

Jimi Mack said:
Glad to hear you solved your issue, but your question should have been in the Viper OS thread.
Click to expand...
Click to collapse
Thanks, but i dont agree. As i said, ViperOS was not the main aspect of my problem, it was a problem with the phone.

[CLOSED] [WIP OFFICIAL]AICP 13.1 [8.1][cheeseburger]

THREAD CLOSED​
MOVED TO Official AICP 13.1 [8.1] [cheeseburger]​

Ill take this

And this too

And another

This is mine too

One more for good luck!

Thanks for sharing! Flashing now.

Clean flashed 11/05 build but Wifi won't stay on. Tap the switch, it toggles to on then jumps back to off right away (and stays off). Restarting multiple times does not allow wifi to stay ON. Starting in Safe Mode, wifi also has the same problem. Maybe a kernel issues?
Anyway, Logcat zipped is here. Maybe someone can figure it out?

Is this worth it? Has the dev at least got the device?
---------- Post added at 11:42 PM ---------- Previous post was at 11:41 PM ----------
poincare said:
Clean flashed 11/05 build but Wifi won't stay on. Tap the switch, it toggles to on then jumps back to off right away (and stays off). Trying to pull logcat...
Click to expand...
Click to collapse
Does that on LOS 15 too, restart then wifi will probably come back.

poincare said:
Clean flashed 11/05 build but Wifi won't stay on. Tap the switch, it toggles to on then jumps back to off right away (and stays off). Restarting multiple times does not allow wifi to stay ON.
Logcat zipped is here. Maybe someone can figure it out?
Click to expand...
Click to collapse
Are you encrypted or decrypted? I clean flashed on encrypted and ended up in bootloop.

gvaram said:
Are you encrypted or decrypted? I clean flashed on encrypted and ended up in bootloop.
Click to expand...
Click to collapse
I nuked my whole device, format data -reboot- etc.., etc., then clean flashed it. It seems to encrypt if you click on Encrypt Phone in the settings > security.

poincare said:
I nuked my whole device, format data -reboot- etc.., etc., then clean flashed it. It seems to encrypt if you click on Encrypt Phone in the settings > security.
Click to expand...
Click to collapse
For clean flash there is no need to format data. But yeah, if you formatted data you are decrypted. Thanks for the replay. OP should mention this, so people will not end up in bootloop.
Edit: Installed on decrypted. Wifi is working after reboot.

gvaram said:
For clean flash there is no need to format data. But yeah, if you formatted data you are decrypted. Thanks for the replay. OP should mention this, so people will not end up in bootloop.
Edit: Installed on decrypted. Wifi is working after reboot.
Click to expand...
Click to collapse
I'm on the leaked OOS beta (rooted), does this have any features enabled that would make it worth switching over?

djsubterrain said:
I'm on the leaked OOS beta (rooted), does this have any features enabled that would make it worth switching over?
Click to expand...
Click to collapse
It's not OOS. :highfive::highfive:

Is there any reliable fix for WiFi right now?

Thanks for this new amazing ROM, I just want to know if it work on encrypted device, I don't want to format data or made it and then re-encrypt.

Good smooth Rom. Awesome work keep it up!
WiFi works for me.
Just one thing which don't work for me, the home button works completely not. Bug from my side?

djsubterrain said:
I'm on the leaked OOS beta (rooted), does this have any features enabled that would make it worth switching over?
Click to expand...
Click to collapse
Ordinary Oreo rom.
CrunchMilk said:
Is there any reliable fix for WiFi right now?
Click to expand...
Click to collapse
After 1st restart wifi works.
VampireHeart said:
Thanks for this new amazing ROM, I just want to know if it work on encrypted device, I don't want to format data or made it and then re-encrypt.
Click to expand...
Click to collapse
No, decrypted devices only.

secXces_debaki said:
Good smooth Rom. Awesome work keep it up!
WiFi works for me.
Just one thing which don't work for me, the home button works completely not. Bug from my side?
Click to expand...
Click to collapse
Nope, same here, a mention of this in the OP might have been nice, cos this tells us nothing:
General Oreo bugs.
You tell...
Click to expand...
Click to collapse
Even Button Mapper Pro won't enable the home button.
Slider seems to work ok though.
@DarkExistence Here's some logs if it'll help.

delete dis

Need help with twrp

Hey guys well i bircked my phone i can reinstall everything but the thing is i have music and pictures on my pixel 2 xl but i didn't transfer anything before i messed up. So now im in recovery mode and before i was able to otg it and transfer but now i seem not to be able to mount it is there any way i can transfer my files through twrp and thanks.

gokou46 said:
Hey guys well i bircked my phone i can reinstall everything but the thing is i have music and pictures on my pixel 2 xl but i didn't transfer anything before i messed up. So now im in recovery mode and before i was able to otg it and transfer but now i seem not to be able to mount it is there any way i can transfer my files through twrp and thanks.
Click to expand...
Click to collapse
Can you boot into the OS? If not, do you know how to fastboot a factory image without wiping data?

nope i sure dont im kind of new to these.

gokou46 said:
nope i sure dont im kind of new to these.
Click to expand...
Click to collapse
Then you need to read this thread......
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
And then the pic is a guide I made to flash the factory image without wiping data. Just a little FYI going forward. Twrp is kinda borked right now, it won't decrypt data properly with lock screen security enabled, so you have to set it to swipe or none before you can effectively use twrp. Stick to it my friend, you'll get it figured out :good:

So after like 20 installs i was able to get it up and running again so this week i'll root and rom the phone again and i'll follow your guide so i can get the boost mod to work thank you so much for all your help.

gokou46 said:
So after like 20 installs i was able to get it up and running again so this week i'll root and rom the phone again and i'll follow your guide so i can get the boost mod to work thank you so much for all your help.
Click to expand...
Click to collapse
Well done my friend! See, told ya you'd get it. Feel free to ask anytime for help ???

Got it to work what kernal do you reccommend in me getting

gokou46 said:
Got it to work what kernal do you reccommend in me getting
Click to expand...
Click to collapse
This one ??
https://forum.xda-developers.com/pixel-2-xl/development/taimen-flash-kernel-1-00-t3702057

Question Touchscreen not working

Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?

persifele said:
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
Click to expand...
Click to collapse
Did you contacted the assistance? Seems a bad driver or kernel problem.

zSyntex said:
Did you contacted the assistance? Seems a bad driver or kernel problem.
Click to expand...
Click to collapse
no because i dont know how much it would cost and the phone isnt mine either so if possible i dont want to spend money

persifele said:
no because i dont know how much it would cost and the phone isnt mine either so if possible i dont want to spend money
Click to expand...
Click to collapse
We couldn't provide support for the hardware, mostly because you said that you've tried to reset the device and flash the stock ROM again.
If this doesn't fix the hardware issue, the assistance is the only way.
Probably a failure batch etc.

to be completely honest i flashed the stock rom by a backup i did before flashing lineage os, so if there's a guide on how to flash one ui 5.1 in order to have a clean installation it would be rlly helpful

persifele said:
to be completely honest i flashed the stock rom by a backup i did before flashing lineage os, so if there's a guide on how to flash one ui 5.1 in order to have a clean installation it would be rlly helpful
Click to expand...
Click to collapse
Simply download the latest firmware from SamLoader (Bifrost) and use Odin in order to flash it.
Tell me if you couldn't flash

I tried installing the latest firmware with odin, everything went fine but nothing, touch still doesn't work, i think tomorrow i'll take it to someone to fix it.

persifele said:
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
Click to expand...
Click to collapse
what model of a32 is it? SM-A325F or??
One ui 5.1 firmware cannot be downgraded. I currently daily drive crdroid from nazim on one ui 5.1 firmware. my touch has never had issues. May be a hardware issue. Maybe a custom kernel would solve it. I built one for A325F that works on one ui 5.1 firmware. Give it a try from here. Its permissive btw. Just flash it in twrp. Although take a backup of boot before flashing incase something goes wrong

Captain_cookie_200 said:
what model of a32 is it? SM-A325F or??
One ui 5.1 firmware cannot be downgraded. I currently daily drive crdroid from nazim on one ui 5.1 firmware. my touch has never had issues. May be a hardware issue. Maybe a custom kernel would solve it. I built one for A325F that works on one ui 5.1 firmware. Give it a try from here. Its permissive btw. Just flash it in twrp. Although take a backup of boot before flashing incase something goes wrong
Click to expand...
Click to collapse
Hi, I tried to flash from twrp but it just gives me a series of "unable to unlock /dev/block/mmcblk0p14" and so on, btw yes its a A325F.

persifele said:
Hi, I tried to flash from twrp but it just gives me a series of "unable to unlock /dev/block/mmcblk0p14" and so on, btw yes its a A325F.
Click to expand...
Click to collapse
its fine. those are normal. if the flash suceeds at last that is all that matters

Captain_cookie_200 said:
its fine. those are normal. if the flash suceeds at last that is all that matters
Click to expand...
Click to collapse
The problem is that after flashing it goes in a bootloop where it says that "this phone's bootloader is unlocked, press power button" i do it and it starts the galaxy logo with above the writing "the software you are using isnt official, you may have problems with security and features" and it gets stuck there, rn i flashed the original firmware with odin and the phone is working but touch still isn't.
EDIT: i forgot to add that when i flashed with odin everything was going fine until the phone's screen went from green to red, i've never seen this so idk if i should be worried or not (phone is still running normally).

persifele said:
The problem is that after flashing it goes in a bootloop where it says that "this phone's bootloader is unlocked, press power button" i do it and it starts the galaxy logo with above the writing "the software you are using isnt official, you may have problems with security and features" and it gets stuck there, rn i flashed the original firmware with odin and the phone is working but touch still isn't.
EDIT: i forgot to add that when i flashed with odin everything was going fine until the phone's screen went from green to red, i've never seen this so idk if i should be worried or not (phone is still running normally).
Click to expand...
Click to collapse
oh weird . you are using one ui 5.1 right? whats the firmware name or version. Also those things def look like hardware issue. you should get it checked.

Captain_cookie_200 said:
oh weird . you are using one ui 5.1 right? whats the firmware name or version. Also those things def look like hardware issue. you should get it checked.
Click to expand...
Click to collapse
yes i'm on android 13 one ui 5.1, the firmware is A325FXXU3DWB8_A325FOXM3DWB8_ITV. I got it checked and they said that it cant be fixed because i cant downgrade from android 13 to another one, i could try installing crdroid like you and if you could send me a guide it would be amazing, thanks again.

persifele said:
yes i'm on android 13 one ui 5.1, the firmware is A325FXXU3DWB8_A325FOXM3DWB8_ITV. I got it checked and they said that it cant be fixed because i cant downgrade from android 13 to another one, i could try installing crdroid like you and if you could send me a guide it would be amazing, thanks again.
Click to expand...
Click to collapse
Just flash twrp for this thing from here. Follow steps on that thread to decrypt your storage and stuff. Then download crdroid gsi. Extract it. flash img file to system partition in twrp. Afterwards wipe dalvik, cache, internal storage
(internal storage is not necessary). You should be able to boot into twrp sucessfully.
I also have some workarounds and the stuff i use for my daily driving in this thread here.
If you need any further help i'll be here to assist.

Captain_cookie_200 said:
Just flash twrp for this thing from here. Follow steps on that thread to decrypt your storage and stuff. Then download crdroid gsi. Extract it. flash img file to system partition in twrp. Afterwards wipe dalvik, cache, internal storage
(internal storage is not necessary). You should be able to boot into twrp sucessfully.
I also have some workarounds and the stuff i use for my daily driving in this thread here.
If you need any further help i'll be here to assist.
Click to expand...
Click to collapse
Oh um i am sorry looks like thread doesnt contain instructions to that. I'll write em here myself
When you boot into twrp after flashing go to advanced and go to terminal
type
multidisabler
run it two times. Then go to format. Then press format data and type yes. Once its done reboot back into twrp again. Then flash crdroid as i said in my post above. and format the things i said. you should be able to boot into crdroid normally.

Captain_cookie_200 said:
Oh um i am sorry looks like thread doesnt contain instructions to that. I'll write em here myself
When you boot into twrp after flashing go to advanced and go to terminal
type
multidisabler
run it two times. Then go to format. Then press format data and type yes. Once its done reboot back into twrp again. Then flash crdroid as i said in my post above. and format the things i said. you should be able to boot into crdroid normally.
Click to expand...
Click to collapse
I followed everything you said, flashed crdroid but nothing, touch still doesnt work if not for when im twrp, i tried to flash kernel again and it still didn't so i don't know what to do anymore.

persifele said:
I followed everything you said, flashed crdroid but nothing, touch still doesnt work if not for when im twrp, i tried to flash kernel again and it still didn't so i don't know what to do anymore.
Click to expand...
Click to collapse
So uh looks like you have no options left. I just want to make sure. could you list the exact methods you used to flash the fw. Along with where u got the fw from? Lets see if the fw itself is broken or something.
Also this is very unrelated and time wasting. but you could try download one ui 5 firmware. Then extract super.img from ap. unsparse it and extract vendor.img and flash it to vendor partition using twrp. Then decrypt by typing
multidisabler twice in terminal as said in my previous post. Check if maybe an older version one ui 5 firmware has this issue fixed. one ui 5's kernel boots so one ui 5 vendor should work on 5.1 as well. It may not work but worth a try. you could also try doing this with android 12 firmware if that fixes it. if you do not have a linux machine availible i'll do it for you and upload the files for both firmwares here. Otherwise if its a hardware issue get your phone replaced or try getting the screen replaced. if still nothing happens ig switching to a new phone would be the only optiion.

So, to flash the firmware I used odin, the fw was from sammobile.
For trying to extract super.img and so on idk how to actually do it so if you could explain it would be really helpful. Btw trying to flash android 12 firmware is impossible because samsung made it so,
thank you again for the help.

persifele said:
So, to flash the firmware I used odin, the fw was from sammobile.
For trying to extract super.img and so on idk how to actually do it so if you could explain it would be really helpful. Btw trying to flash android 12 firmware is impossible because samsung made it so,
thank you again for the help.
Click to expand...
Click to collapse
i use samfw mostly for my firmwares. anyways. You need a linux machine nearby. ubuntu or arch. any distro based on them would work.
first you need to unsparse the super.img
for that we use
simg2img super.img super-raw.img
then we can use lpunpack or mount it to get our vendor.
we flash it using twrp and then we run multidisabler twice like we did when we first flashed gsi.

As you said above if you could do it for me it'd be awesome because i don't have a pc with linux rn.