Develop Bugs

Anyone for Fire Phone Screen Protectors?

Anyone for Fire Phone Screen Protectors?

Just spotted one at 0.24mm!
senseijuan said:
Anyone for Fire Phone Screen Protectors?
Click to expand...
Click to collapse
Hmm.. They are getting really popular and I guess you've got to go with one even if it does have Gorilla Glass it still not gonna take a drop directly to the screen. Obviously theres the question of camera results changing, opacity, fitting, responsiveness, cut outs etc and now even the face sensors are a brand new issue.
I've been keeping an eye on amazon and theres plenty around just a case of searching through and seeing who is considering what!
Thickness must be an issue when considering whether the glass will affect the responsiveness of the screen or sensors, I was just on Facebook and spotted that Orzly have one at 0.24 mm thickness.
Haven't had a chance to use any on the device yet but I'll repost here when I have.

Any recommendations?

Spartan Tempered Glass
I purchased a couple of the Spartan Tempered Glass screen protectors from Xtreme Guard, @ ~$4 a piece. While they looked real nice on the phone they had the side effect of triggering the proximity sensor. I had to take it off to make the device usable as a phone... The second you begin a call the screen goes black, it made it impossible to hang up or use the dial pad.
Not sure if there is any setting to adjust the proximity sensor, I couldn't find anything.

senseijuan said:
Anyone for Fire Phone Screen Protectors?
Click to expand...
Click to collapse
http://www.amazon.com/Aduro-SHATTER...-2&keywords=fire+phone+glass+screen+protector
For $2, this is am excellent glass screen protector as good as any other. As with most glass screen protectors for this phone, the proximity sensor is triggered, so it's impossible to hang up calls. You can attempt to escape the call using buttons.

http://www.amazon.com/gp/product/B00WXY18WK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
this protector seems to be the best available right now. It comes with a proximity Sensor window.

Picked up this Moshi screen protector for $5 at the local AT&T store:
https://www.att.com/accessories/screen-protectors/moshi-anti-glareanti-fingerprint-ivisor-screen-protector-amazon-fire-phone.html#sku=sku7270242
Currently selling for $15 at Amazon. Easy to install and working well so far.
There were still a few cases available at the AT&T store, too, more that shown as available through the online site.

amzn.com/B00LAQUKH6

I've also made the mistake of getting a Spartan tempered glass screen protector from XtremeGuard. I'm having the same issues with the proximity sensors. Screen off and unusable in calls. The home button can't wake the phone up anymore. I had to remove it. Wasted $6.

It seems that the majority of screen protectors being sold lack a hole for the proximity sensor. I only have experience with matte screen protectors but I gather this is an issue with the clear/glossy protectors as well. On one protector I used a razor to cut out a hole but then opted for the hole puncher. One properly placed hole punch worked well, though the border of the cut did not adhere well to the surface of the glass. I recommend having that hole punch to deal with the proximity sensor issue.

I purchased a glass screen protector by Volt on Amazon. It works flawlessly. Highly recommended.
Just search Amazon for "volt fire phone screen protector" and it should be the first result.

SHRAPNEL189 said:
I purchased a glass screen protector by Volt on Amazon. It works flawlessly. Highly recommended.
Just search Amazon for "volt fire phone screen protector" and it should be the first result.
Click to expand...
Click to collapse
I have the same screen protector, it works pretty good, except I notice it sometimes doesn't recognize scrolling on webpages or when I try to flick down the menu system. I believe Xtremeguard has some too, I ordered 1 as a backup but I haven't tried to dry fit it. LOL it was only 2 dollars after discount.

hmoobguy said:
I have the same screen protector, it works pretty good, except I notice it sometimes doesn't recognize scrolling on webpages or when I try to flick down the menu system. I believe Xtremeguard has some too, I ordered 1 as a backup but I haven't tried to dry fit it. LOL it was only 2 dollars after discount.
Click to expand...
Click to collapse
I haven't had the same experience. Functionality-wise, it works the same as not having a screen protector at all. I guess YMMV. I wouldn't mind a back up for $2 though LOL.

SHRAPNEL189 said:
I haven't had the same experience. Functionality-wise, it works the same as not having a screen protector at all. I guess YMMV. I wouldn't mind a back up for $2 though LOL.
Click to expand...
Click to collapse
oh, I did a dry fit on the Xtremeguard Spartan version, it appears to fit perfectly. There's a cut out for the front-facing camera, speaker and the home button. linky. Every now and then they'll be 80% or 90% off coupons
I've had a lot of success with their version, and I like it.

hmoobguy said:
oh, I did a dry fit on the Xtremeguard Spartan version, it appears to fit perfectly. There's a cut out for the front-facing camera, speaker and the home button. linky. Every now and then they'll be 80% or 90% off coupons
I've had a lot of success with their version, and I like it.
Click to expand...
Click to collapse
I wonder if they finally changed their screen protector design. I bought the same one and it would trigger my proximity sensor. If you go back to page 1 of this very thread you'll see I'm not alone. I've tried contacting XtremeGuard twice on the matter but they are ignoring my emails. I'm out $6. They're out a customer (this having been like the 10th screen protector I buy from them).

DePingus said:
I wonder if they finally changed their screen protector design. I bought the same one and it would trigger my proximity sensor. If you go back to page 1 of this very thread you'll see I'm not alone. I've tried contacting XtremeGuard twice on the matter but they are ignoring my emails. I'm out $6. They're out a customer (this having been like the 10th screen protector I buy from them).
Click to expand...
Click to collapse
The Volt screen protector I have has a cutout for the proximity sensor. No issues at all.

Also recommend volt screen protector
I used iCarez protector which caused black screen with my phone. After replacing it with Volt glass protector the black screen is gone. I am very happy with the Volt protector. It also feels like the original glass screen.

I always use iCarez screen protectors. I have a review on my website six10webdesign com / reviews. They are so easy to install and look great!

BigHulkDiesel said:
I always use iCarez screen protectors. I have a review on my website six10webdesign com / reviews. They are so easy to install and look great!
Click to expand...
Click to collapse
On that site there is only zagg glass protector????

Click on the youtube link in the top menu. It is a video review.

Do not buy tempered glass screen protectors from any random brand!

tl;dr: I put on a LOCA screen protector, but the fingerprint scanner did not work.
So when I received my S10+, I immediately went to my nearest mall to buy a tempered glass screen protector, because I was afraid that I would drop it, and crack my shiny new phone. They showed me a LOCA screen protector and they said that it supported the in-display fingerprint scanner, and because the whitestone dome glass was also LOCA, I agreed to buy it. When I got back home, first I removed the plastic screen protector, then removed any fingerprints or dust, then I carefully put on the LOCA glue in the middle, then put the glass on, tiled it left and right to make sure the glue fully touched the glass and placed it on the table, then UV cured the top, middle, and bottom, each for 15 minutes. After it was done, I carefully used a razor blade to remove excess, making sure not to remove the glue touching the glass, then powered on my S10+. The touch was working normally, so I went into settings, searched fingerprint, and tried to register my finger, but it kept saying "Press a little harder", or "Make sure your finger fully covers the fingerprint scanner", etc. I pressed harder, but nothing happened. So I went to the mall again and decided to exchange for a plastic screen protector. So if you don't want to waste money, DO NOT BUY A RANDOM BRAND SCREEN PROTECTOR. Even if they tell you its LOCA or that it supports the in-display screen protector, don't buy it unless its a Whitestone Dome Glass or another screen protector that has been confirmed to work with the fingerprint sensor, in which case go for it.

I think even with the Whitestone Dome you had to press on the fingerprint area while curing to make sure the fp scanner worked. So I'm guessing it would be the same with the non Whitestone ones.
Sent from my [device_name] using XDA-Developers Legacy app

jadaress1 said:
I think even with the Whitestone Dome you had to press on the fingerprint area while curing to make sure the fp scanner worked. So I'm guessing it would be the same with the non Whitestone ones.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
No need to press on the FP during curing with Whitestone. Just do some extra curing and first at the bottom.

XDDDD12345 said:
tl;dr: I put on a LOCA screen protector, but the fingerprint scanner did not work.
So when I received my S10+, I immediately went to my nearest mall to buy a tempered glass screen protector, because I was afraid that I would drop it, and crack my shiny new phone. They showed me a LOCA screen protector and they said that it supported the in-display fingerprint scanner, and because the whitestone dome glass was also LOCA, I agreed to buy it. When I got back home, first I removed the plastic screen protector, then removed any fingerprints or dust, then I carefully put on the LOCA glue in the middle, then put the glass on, tiled it left and right to make sure the glue fully touched the glass and placed it on the table, then UV cured it for 15 minutes. After it was done, I carefully used a razor blade to remove excess, making sure not to remove the glue touching the glass, then powered on my S10+. The touch was working normally, so I went into settings, searched fingerprint, and tried to register my finger, but it kept saying "Press a little harder", or "Make sure your finger fully covers the fingerprint scanner", etc. I pressed harder, but nothing happened. So I went to the mall again and decided to exchange for a plastic screen protector. So if you don't want to waste money, DO NOT BUY A RANDOM BRAND SCREEN PROTECTOR. Even if they tell you its LOCA or that it supports the in-display screen protector, don't buy it unless its a Whitestone Dome Glass or another screen protector that has been confirmed to work with the fingerprint sensor, in which case go for it.
Click to expand...
Click to collapse
Curing for 15mins??? Was this a personal decision on your part to cure for 15 minutes? To the second post, yes you're correct that Whitestone Dome updated their instructions to push down on the sensor in between curing sessions.
Sent from my SM-G975U using Tapatalk

nunyabiziz said:
Curing for 15mins??? Was this a personal decision on your part to cure for 15 minutes? To the second post, yes you're correct that Whitestone Dome updated their instructions to push down on the sensor in between curing sessions.
Sent from my SM-G975U using Tapatalk
Click to expand...
Click to collapse
Yes, it was my personal decision since I searched up how long to cure and the search result i saw said 15 mins so I randomly decided to do that, but also see edit, I did top, middle, bottom each for 15 mins, so should've been enough, the bottom for a bit more longer. After knowing it didn't work, cured it for 2 hours, but it still didn't work.

I tried the WhiteStone on my S10+ and it didnt work too well... even after following each step to the T. The FP was hit and miss each time, became annoying really quickly so off it came
I did think it might have been an error on installation but checking out the Amazon reviews, many people have the same issue.
I think a good idead would be a Tempered glass protector with a cutout for the FP sensor which is then covered by a TPU attached to the glass
Anyway, thats me done. Taa

I installed a ''ramdom'' brand instead of White Stone because it was much cheaper and came with 2 protectors. I did press a little at the bottom where the sensor is located. And the sensor was working, but not very reliable. Now with the new update for biometrics it has improved a lot.

My experience with the Whitestone on the S10+:
My first install I got a huge bubble. This is despite having done about 5 installs on my S9+ I upgraded from. I mistakenly dropped the pin when the glue hit the arrows instead of when the glue touched the glass. I did the cleaning of the phone and glass before curing. Note: I couldn't get the absorption pads in, so it made a huge mess in the tray.
Second install was with my "cleaned" glass. The install went much better. There were two annoying but acceptable bubbles. I only noticed them on white bg or when the screen was off. The FPS was very hot or miss. Turned out there were micro bubbles barely noticeable below the FPS and below the speaker. Apparently they were causing a problem even though it wasn't where the sensor was. It was enough to throw it off. I did the 1 minute press at install. Success rate was about 2/10.
I contacted WSD about how to do a warrenty, using Facebook messenger. I was willing to pay for the replacement. I figured the error was in my cleaning of the glass. They ended up sending out the replacement for free. No pictures or anything needed.
Third install went off without a hitch. The replacement shipped with the absorption pads installed. They now hook into the top tray instead of putting into the bottom. I did the 1 minute press and cured 2 or 3 minutes each top and bottom. Success rate is now 17/20, which is just as good or better than what I got on my 9+. The latest patches seem to help a ton.
Notes:
I'd read someone say after the latest patch to redo finger prints with a little pressure as possible. This seems to have made a big impact for me.
I've read that if you're hands are dried out, that can affect things. I definitely have more problems when my hands are dried out.
Sometimes my thumb will move slightly during the scan. This results in an almost definite fail.
Lifting my thumb too fast seems to contribute to fails. If I leave my thumb on until it clears, I have almost perfect recognition.

How to do choose tempered glass screen protector for any brand mobile
One thing that comes hand in hand with a new smartphone is screen protector. Two major materials for a screen protector can either be a plastic film or tempered glass. Tempered Glass screen protector is preferred over the plastic screen protectors because it offers better protection. So, what could be some of the criteria in choosing the best-tempered glass screen protector? To help you choose the right one, I carefully selected the 4 criteria below:
Toughness
Touch sensitivity
Edge to Edge cover
Smudge-Proof
This is some key criteria when choosing the screen protector

Maybe buy a flip case and leave the Samsung fitted protector
I considered various options then decided a working fingerprint sensor was more important to me than a glass screen protector so just bought a faux leather flip cover with magnetic clasp (£2.99 on eBay)

What I noticed with the whitestone is that it takes a few days for the fingerprint scanning to get better. Its still not as good as without a screenprotector, but on day 1 i couldnt even register my fingerprint, since then every day its a bit better.

Recently purchased the whitestone dome glass and installed it. Been using it for almost a week now and fingerprint scanner works pretty well for me (95% of the time). Was hesitant due to bad reviews but gave it a shot and I'm pleased with it. I followed the instruction video on their website and installed with no problems.

dezborders said:
I considered various options then decided a working fingerprint sensor was more important to me than a glass screen protector so just bought a faux leather flip cover with magnetic clasp (£2.99 on eBay)
Click to expand...
Click to collapse
I ended up buying the Neo Flex Screen protector and Spigan neo hybrid case absolute brilliant so glad I did. I've had them on now for about 2 months working in the building trade so my screen goes through a lot dust and all sorts and this screen protector has done brilliantly.
Sent from my SM-G975F using Tapatalk

Screenprotector problem

Im looking for a good glass screen protector. Ive bought 2 so far both having that awefull hole in the middle of the screen and the fingerscan not working

You need to get a screen protector that has glue that needs to be cured under UV light.
A whitestone dome glass screen protector comes to mind but there are others out there that are cheaper (just not as well known)...
Just make sure that you press down over the finger print area while curing so it has minimal glue to interfere with the fingerprint sensor.
Just be aware, depending on the case you use this may also cause the edges to lift. Can be expensive to have an incompatible case on...

Yea ive seen that, but im not into the whole glue thing. My brother has the same inscreen fingerprint on his oneplus 7T with a glass screenprotector without anything visueble. But he ordered one from oneplus store so idk what brand of screenprotectors would look the same

__F8triX__ said:
Yea ive seen that, but im not into the whole glue thing. My brother has the same inscreen fingerprint on his oneplus 7T with a glass screencprotector without anything visible. But he ordered one from oneplus store so idk what brand of screencprotectors would look the same
Click to expand...
Click to collapse
The whitestone dome glass screen protectors glue is not your typical type glue, if you need to remove the protector you can peel them off just like any other and it doesn'tc leave any glue on the screen and the screen looks just like the day you applied the protector.. The Whitestones are expensive so i'd watch some videos before I tried to apply. If done correctly its hard to tell you even have a protector on the phone.

blake .l said:
The whitestone dome glass screen protectors glue is not your typical type glue, if you need to remove the protector you can peel them off just like any other and it doesn'tc leave any glue on the screen and the screen looks just like the day you applied the protector.. The Whitestones are expensive so i'd watch some videos before I tried to apply. If done correctly its hard to tell you even have a protector on the phone.
Click to expand...
Click to collapse
Yea but i read alot of comments saying it crackle after a couple weeks. I dont mind spending 50 € butit has to be a good one

I am using the amFilm Ultra Glass Screen Protector that I got on Amazon. Its similar the whitestone as it has glue. But it is a lot cheaper $34 for a 2 pack. Took about a half hour to install after watching the video and it really functions well. No issues at all with the fingerprint sensor.

Question Just installed a glass screen protector and FPR won't recognize

I did the steps people have said to do like increase touch sensitivity and re add all the fingers I would use but it still won't work. I don't know who made this protector since I got it off a marketplace site and when I met with the person all he gave me was the screen protector. It was only $5 i got it for so no big deal if it's ****.
Other than that it feels good and everything else works fine.

There are some other threads on here about glass screen protectors. The majority don't work with FP, but there are some that do. Check those threads for info.

In general you need to go for the UV glued type..... All the ones with just glue on the edges will leave an air gap between screen and glass, this heavily impedes with FP functionality.....

Is the brand on Google's approved list?

s3axel said:
In general you need to go for the UV glued type..... All the ones with just glue on the edges will leave an air gap between screen and glass, this heavily impedes with FP functionality.....
Click to expand...
Click to collapse
The air gap has nothing to do with it, the Pixel 6 with its perfectly flat screen has the same problems, my wifes Spigen one has rendered her FPS useless.

MrBelter said:
The air gap has nothing to do with it, the Pixel 6 with its perfectly flat screen has the same problems, my wifes Spigen one has rendered her FPS useless.
Click to expand...
Click to collapse
Thanks, maybe the cause is not as simple as I assumed... Still my experience remains over many phones: the edges-only glued glass protectors just don't work (for me )

s3axel said:
Thanks, maybe the cause is not as simple as I assumed... Still my experience remains over many phones: the edges-only glued glass protectors just don't work
Click to expand...
Click to collapse
I'm not disputing that, i was just clarifying the Pixel 6 suffers the same problem even with a flat screen.
Never had a problem with a 1+ phone using a glass protector over the FPS even with the cheapest crap i could find so as far as i am concerned all the reasons Google are coming out with are absolute cobblers.

So should I just take this thing off or wait for a software update from Google?

I for myself have installed a TPU screen protector presently, awaiting delivery of a UV glass protector as I like those more
I'd hope Google improves the behaviour of the FPS, in how far however I don't know.....

I am currently using the below TPU screen protector and could not be happier with it. My fingerprint scanner works nearly every single time and I have not had an issue. Once the screen protector has been properly applied (I admit, I screwed it up the first time) I cannot even tell that it is on my screen visibly or by touch.
Having said that, I am a little concerned that a TPU screen protector is not as good in general as a glass one. I have not had an issue yet, but I also have not had an accidental drop or anything.
I will also say that I have registered each of my thumbs twice. I will get an occasional "longer" read, and by longer, maybe a half a second longer. However, I have noticed that when that happens, my thumb is slightly out of the read circle. When my thumb is dead center, it reads it every time really quickly.
I am not all that excited about a UV glass protector as I have read horror stories of discoloration and some users not being able to get them off.
Supposedly Google has released their approved screen protectors list. I am not about to spend 50 bucks on a Zagg. The one for Panzer was more reasonable, but it disappeared off their website. The Otterbox is another TPU and I like the one I have:
Amazon.com

I might just take this off and use nothing. I didn't use a protector for my s7 edge or s10+ and didn't get a single scratch. I only got it because I wanted to preserve the oilyaphobic coating. This thing only cost me $5 in the end

Did peeps make sure to use the increased screen sensitivity setting for use with screen protectors?

KedarWolf said:
Did peeps make sure to use the increased screen sensitivity setting for use with screen protectors?
Click to expand...
Click to collapse
yes, it makes zero difference.

Typically with curved screens, you need a full-screen adhesive in order for the FPR to work after installation. Either that, or one with edge adhesive with an area over the reader that also sticks to the screen, but I personally think those are kinda ugly. For the regular P6, my girlfriend ordered a brand called "TOCOL" for a glass protector, which is working great all around.
If/when Whitestone Dome releases one for the P6P, that will be the only really good option. It's either that, or buy an edge adhesive style one, buy LOCA glue and a UV lamp, and DYI it. Only way you're going to have glass and a working FPR.
I'm using a TPU protector and a case. TPU has come a long way tbh, the dry install ones I got feel like a naked screen and give me some piece of mind in regard to small scratches. The case does the rest as far as drop protection. Victus Glass is pretty good for shatter resistance generally, but crap for scratches.
OP, I would remove that one if you want to use the Fingerprint Reader. There isn't a software update that's going to solve that problem unfortunately. I'd just use a decent TPU for now and if you really want glass after you try it still pray for Whitestone Dome. There's another thread on here dedicated to working protectors, I'd check that out and pick one.
Pixel 6 Pro screen protector
Hi all, I have a few questions around tempered glass screen protectors for curved screens like the Pixel 6 Pro, I was wondering if people had any answers to: Are there any known brands that do good quality curved tempered glass screen...
forum.xda-developers.com

orlans21 said:
I did the steps people have said to do like increase touch sensitivity and re add all the fingers I would use but it still won't work. I don't know who made this protector since I got it off a marketplace site and when I met with the person all he gave me was the screen protector. It was only $5 i got it for so no big deal if it's ****.
Other than that it feels good and everything else works fine.
Click to expand...
Click to collapse
If you prefer the 9H glass protectors, you'll have to find a glass protector that is "Google certified" to work with fingerprint reader.
These are glued to the screen to make 100% positive contact with the glass protector.
I'm guessing you have a 9H glass protector like mine that has a very small air gap between the screen and the protector. Even with the enhanced fingerprint reader setting, my fingerprint reader doesn't pick up anything.
The TPU flexible protectors supposedly work well, but I like the 9H glass protectors.
The Google Certified 9H glass protectors that I've found are between $15 - $39 per protector, and many of them are "out of stock" at the moment.

MrBelter said:
The air gap has nothing to do with it, the Pixel 6 with its perfectly flat screen has the same problems, my wifes Spigen one has rendered her FPS useless.
Click to expand...
Click to collapse
Yeah it's only the Pro model that has curved screens and requires UV glue protectors, which there is currently none available until Whitestone Dome releases. I managed to get this and it works perfectly but it's already out of stock [3 Pack]Google Pixel 6 Pro Screen Protector,Akcoo Liquid UV Tempered Glass [Full Screen Adhesive][Edge to edge coverage][Compatible with fingerprint sensor] for Pixel 6 Pro 6.7 inch https://www.amazon.com/dp/B09KC72DW...abc_YW4QX456AX8GJ33BV928?_encoding=UTF8&psc=1

orlans21 said:
So should I just take this thing off or wait for a software update from Google?
Click to expand...
Click to collapse
Have you tried to delete the finger print and add a new one?

lucky_strike33 said:
Have you tried to delete the finger print and add a new one?
Click to expand...
Click to collapse
yeah, i got rid of the protector. it was garbage

Accessories Screen protectors

Thank god we finally have a flat screen Android flagship device! This means that searching for the perfect screen protector is easy, right? Right?!
Nope. Tried 2 already:
Nillkin H+Pro, 0,2mm temperes glass. Thin enough to work with the fingerprint sensor but covers only the display portion, none of the bezels. Because of this, it gets the rainbow effect on the sides.
Spigen ez fit rtc. Tempered glass. Pretty good coverage (could be better) but the thickness interferes with the fp sensor, it works very slow with this one.
So...where to buy "the one to rule them all". Full coverage, edge to edge (maybe with black borders) and sufficient compatibility with the fp sensor. Share your experiences!

I use https://www.caseologycases.com/products/galaxy-s22-screen-protector-snap-fit and registered the FP after applying the glass. I am satisfied. 9 off 10 attempts work.

xxxPLETTIxxx said:
I use https://www.caseologycases.com/products/galaxy-s22-screen-protector-snap-fit and registered the FP after applying the glass. I am satisfied. 9 off 10 attempts work.
Click to expand...
Click to collapse
I'm 90% sure that this is the same as the Spigen one. Fp works but is slower. It is cheaper though!

I tried to get a tempered glass installed, but the Samsung store person informed me that the ultrasonic fingerprint reader is a hit and miss so I went with a GadgetShieldz scratch guard as of now. But I'm keen on understanding others' experiences on tempered glass.

I personally don't like tempered glass ones, I'm more concerned about scratches than it falling. So I went with Samsung's own screen protector, got it at my local store and asked them to put it on there.

I prefer matte screen protectors hence I got this one: https://a.aliexpress.com/_vBWviH
I like it very much, it's practically edge to edge, I'd say about .5mm gap.

My experience with glass screen protectors is that, unless they're bonded with a light cured adhesive, the fingerprint scanner stops working reliably after a few hours. Re-registering the fingerprints or increasing touch sensitivity in settings does not significantly improve the situation. Outside of the fingerprint sensor issue, this generation of tempered glass screen protectors, most of which use a snap-on frame to guide their installment, work very well and seem to be case friendly.

For me, these are the best:
- Screen protector: https://www.spigen.com/collections/...otector-neo-flex-solid?variant=40414744346671
- Case: https://www.spigen.com/collections/...s22-5g-case-liquid-air?variant=40498618499119

aaqd said:
I personally don't like tempered glass ones, I'm more concerned about scratches than it falling. So I went with Samsung's own screen protector, got it at my local store and asked them to put it on there.
Click to expand...
Click to collapse
The most important would be is your mid/long term experience with it.
Simply indicating what did you choose in the end is pointless in my opinion.

I hate GeekSquad but, they do at least one thing right: they install good screen protector. Just go to BestBuy and ask for a custom screen protector. They will install a ClearPlex protector with a special machine and it has a lifetime warranty. Cost: 30$ CAD. No problem with fingerprint sensor... Plus: if you ever find scratches, you can use a heatgun to repair it. The plastic will "self-repair".

Nico3d3 said:
I hate GeekSquad but, they do at least one thing right: they install good screen protector. Just go to BestBuy and ask for a custom screen protector. They will install a ClearPlex protector with a special machine and it has a lifetime warranty. Cost: 30$ CAD. No problem with fingerprint sensor... Plus: if you ever find scratches, you can use a heatgun to repair it. The plastic will "self-repair".
Click to expand...
Click to collapse
I use the same phone cover that can self-heal the scratches and it really works, the scratches disappear within a few minutes. I got it from Gadgetshieldz for just $12 and it is giving good protection also fingerprint works fine! This S22 screen protector is better than the Samsung protectors.

I used the Whitestone and two cracked in 2 weeks.
They take a month to respond never buying again

dinamo1975 said:
For me, these are the best:
- Screen protector: https://www.spigen.com/collections/...otector-neo-flex-solid?variant=40414744346671
- Case: https://www.spigen.com/collections/...s22-5g-case-liquid-air?variant=40498618499119
Click to expand...
Click to collapse
I have Spigen's EZ-fit tempered glass on my S22 and can't really say I like it. The fingerprint reading is very hit-and-miss. And this even after I deleted fingerprints made before installing the protector and new ones recorded after. Using it from the AOD screen nearly never works. Once active it seems to be less problematic than for AOD, but not well enough to be called "good".

wkearney99 said:
I have Spigen's EZ-fit tempered glass on my S22 and can't really say I like it. The fingerprint reading is very hit-and-miss. And this even after I deleted fingerprints made before installing the protector and new ones recorded after. Using it from the AOD screen nearly never works. Once active it seems to be less problematic than for AOD, but not well enough to be called "good".
Click to expand...
Click to collapse
Dinamo mentioned a different product. It is not tempered glass but a very soft TPU with sprayed adhesive. Hopefully it works fine cause I just ordered it. I think Samsung screen protectors in Galaxy s10 time was exactly the same.

Hello, I have tried to put 2 different screen protectors on my phone and with both of them I have a problem of not sticking on the edges!! any of you have the same problem? one of them is the Spigen's EZ-fit!!! Thanks