Deal all,
I have a unit with specifications:
MCU version：
MTCD_LM_V1.63_2
Jun 12 2016 10:48:48
Android version：
5.1.1
Kernel version：
3.0.101+
[email protected] #28
Wed Jun 22 18:06:36 CST 2016
Build number：
rk3188-userdebug 24062016.09:46:06
RAM 1 Gb ROM 16 Gb
my unit can't read some bluetooth devices.
for the MCU update the version is compatible with my unit, so that my unit can be connected to a bluetooth device.
thank you for the information and instructions. :good:
try updating with attached mcu file..
julien_blanche said:
try updating with attached mcu file..
Click to expand...
Click to collapse
The unit must be rooted to install it ? Thx Jb
[email protected] said:
The unit must be rooted to install it ? Thx Jb
Click to expand...
Click to collapse
No, root is not needed. Just put the dmcu image root of the usb drive or sd card and flash it from settings menu.
julien_blanche said:
No, root is not needed. Just put the dmcu image root of the usb drive or sd card and flash it from settings menu.
Click to expand...
Click to collapse
I have updated from the settings menu, but it didn't work. can you explain me the stages of the update process.
[email protected] said:
I have updated from the settings menu, but it didn't work. can you explain me the stages of the update process.
Click to expand...
Click to collapse
Hi,
1-Extract the dmcu image file to a usb drive
2-Connect the usb drive to your head unit
3-Copy dmcu image file to your internal storage
4-Go to settings->system->mcu updates
hope it helps.
Dear julien_blanche, I installed the file was attached in that topic, and it seems it wasfor another model - the problem is that all buttons does not work on my radio and wheel buttons also. Please, can you provide me how to resolve it?
Related
Need to get back to stock but have no access to the stock backup anymore.
Last thing I could dig up was a screenshot of its Phone Status in stock ROM.
Code:
[B]Model number[/B]
Moto G5
[B]Software Channel [/B]
reteu
[B]Android Version[/B]
7.0
[B]Android security patch level[/B]
February 1, 2017
[B]Baseband Version[/B]
M8937_07.07.02.48R CEDRIC_EMEADSDS_CUST
[B]Kernel version[/B]
3.18.31-perf-gc345393
[email protected] #1
Fri Mar 3 18:28:14 CST 2017
[B]Build number[/B]
NPP25.137-45
Yet I only found NPP25.137-33 builds. Any help is highly appreciated!
No_Signal said:
Need to get back to stock but have no access to the stock backup anymore.
Last thing I could dig up was a screenshot of its Phone Status in stock ROM.
Yet I only found NPP25.137-33 builds. Any help is highly appreciated!
Click to expand...
Click to collapse
Just use that build and upgrade.
p8tgames said:
Just use that build and upgrade.
Click to expand...
Click to collapse
But that would be considered a downgrade, NPP25.137-45 -> NPP25.137-33. According to this post by TheIFIxItMan.
I purchased a new unit 4 days ago but having unlocked developer mode there does not seem to be an option to select USB debugging.
Due to this I would like advice to install a rooted Oreo like "update_8_0_Oreo_PX5_v_1.1_MALAY_22_03_2018_MTCD_MTCE"
the question is can I update to this?
what is correct files to install?
how to get to recovery can some one share their experience?
are these units generic?
Android security patch level:
October 5, 2017
Kernal version:
4.49+
[email protected] #134
Build number:
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180306.120830 test-keys
MCU version:
MTCE_XRC_V2.80_1
CPU:
8 core 64-bit CPU Coretex-A53 @ 1.5G
Memory:
3891 MB
follow the instructions and you can install malaysk's rom
https://forum.xda-developers.com/an...-malaysk-roms-px5-2-4-gb-8-0-android-t3762724
Hi Guys,
i am a new owner of a MTCE Android Head-Unit and interested in upgrading my rom to a custom rom. Especially in hal9k, but I'm open to that.
The problem I have is, I am a little scared, that I can never go back to the stock rom, if anything is even worse than now. And I just buyed it, and could easily return it till 2 weeks from now. If I flash a custom ROM and cant go back, I'm sure, I can't return it easily.
Therefore I am searching for the STOCK ROM for my unit.
So far, I didn't found it. Maybe I was just searching at the wrong section. Or it is burried deep down in a long thread. So if someone could help me finding it, it would be very nice.
Build-number
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180126.155501 test-keys
MCU:
MTCE_XRC_V2.94_1
Thank you in advance.
I'm in the exactly same situation.
Bad luck for us. I didn't find any XRC stock rom, and my seller is just ignoring my messages.
If you finally find something please report. I will do the same.
Have a look here: https://forum.xda-developers.com/showpost.php?p=75173763&postcount=2
There are a list of stock roms that supposed to be totally compatible among every PX5 model.
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
bovcan said:
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
Click to expand...
Click to collapse
Thank you very much!.
Im having a XRC2 MCU versión 2.96a
¿Do you think that this Roms you posted are also compatible with XRC2 MCU?
Install stock firmware starting from a custom ROM - Malaysk
Hello,
i'd like to know the procedure to install back the stock firmware starting from a custom rom (hal9k, Malaysk)
i have a Rockchip Px5 MTCE device
Thanks
p
edding7 said:
Thank you very much!.
Im having a XRC2 MCU versión 2.96a
¿Do you think that this Roms you posted are also compatible with XRC2 MCU?
Click to expand...
Click to collapse
Post your complete mcu version here.
psestito said:
Hello,
i'd like to know the procedure to install back the stock firmware starting from a custom rom (hal9k, Malaysk)
i have a Rockchip Px5 MTCE device
Thanks
p
Click to expand...
Click to collapse
You can use any mtce stock rom. Flash it via USB or SD card.
le_mi said:
Post your complete mcu version here.
You can use any mtce stock rom. Flash it via USB or SD card.
Click to expand...
Click to collapse
Thanks for answer, the complete version is:
MTCE_XRC2_V2.96a_2
good night, I have an android radio bought on aliexpress, is the seller of the podofo store, anuque panlelo also sells it as model S1.
The data are the following:
System: K6_01_IH_V2.0.1_20181012
Kernel: 3.4.67
MCU: CM_18.02.07_09.28
APP: MT1002_V1.0.9
Compilation number: ALPS KK1.MP1.V2.11
The manufacturer says it's Android 6, but I think it's a lie and it's Kit Kat.
My question is whether this radio could be updated to a newer version of Android, maybe 7.1.2 or Android 8.0
Thank you.
This is link: https://es.aliexpress.com/item/Podo...057.html?spm=a2g0s.9042311.0.0.274263c0Rgy53o
jesusmata said:
good night, I have an android radio bought on aliexpress, is the seller of the podofo store, anuque panlelo also sells it as model S1.
The data are the following:
System: K6_01_IH_V2.0.1_20181012
Kernel: 3.4.67
MCU: CM_18.02.07_09.28
APP: MT1002_V1.0.9
Compilation number: ALPS KK1.MP1.V2.11
The manufacturer says it's Android 6, but I think it's a lie and it's Kit Kat.
My question is whether this radio could be updated to a newer version of Android, maybe 7.1.2 or Android 8.0
Thank you.
This is link: https://es.aliexpress.com/item/Podo...057.html?spm=a2g0s.9042311.0.0.274263c0Rgy53o
Click to expand...
Click to collapse
Not an MTCx unit.
marchnz said:
Not an MTCx unit.
Click to expand...
Click to collapse
Thanks.
Then, dont can update?
I think I bought the same one from Amazon, Podofo logo on boot.
System: K6_01_IH_V2.0.1_20181012
Kernel: 3.4.67
Compilation number: ALPS KK1.MP1.V2.11
If an update is not possible, is there any alternative roms I could use? The one that was provided with the unit is buggy af. Any tips on how to reboot this thing into recovery or download mode would be very welcomed.
Just found out rooting is possible with kingroot app, I was also able to reboot it into recovery and download mode. Volume +/- and power buttons did not work in recovery, so did touchscreen, it does not power down when you remove the key from ignition, i had to poke reset. fastboot screen lasted only a couple secs, i did not have anything connected.
Anyone have update files for android radio (isudar) px6, android 10? I'm looking for update zip file and mcu
Fradawnem said:
Anyone have update files for android radio (isudar) px6, android 10? I'm looking for update zip file and mcu
Click to expand...
Click to collapse
hi.do you have order number px6 device from isudar?