Develop Bugs

CHUWI Hi9 Air 64GB MT6797 X20 Deca Core 10.1 Inch 2K Screen Android 8 Dual 4G Tablet

CHUWI Hi9 Air 64GB MT6797 X20 Deca Core 10.1 Inch 2K Screen Android 8..0 Dual 4G Tablet
Specifications
Model CHUWI Hi9 Air
CPU MTK6797 Helio X20 Deca Core 20nm
A72*2 2.3 GHz
A53*4 1.4 GHz
A53*4 1.85 GHz
GPU ARM Mali-T880 780MHz
System Android 8.0
RAM 4GB DDR3
Capacity 64GB EMMC
Screen 10.1 Inch IPS Capacitive Screen
Resolution 2560*1600
299 PPI Pixel Density
OGS One Glass Solution Fully Laminated
Camera Front is 5.0MP Rear is 13.0MP
Microphone Built-in
Speaker Built-in
WIFI 802.11 a/b/g/n/ac(support 2.4GHz and 5.0 GHz)
Bluetooth 4.2
GPS Support
G-sensor Support
Brand(Network)
GSM: (Please see pictures below)
WCDMA: (Please see pictures below)
LTE:1/2/3/4/5/7/8/12/17/20/28/38/39/40/41
OTG Support
TF Card Support (Maximum support 128G)
Audio AAC,AMR,MP3,OGG,WAV,ACC,M4A,FLAC
Picture JPEG,GIF,BMP,PNG,JPG
Video 3GP,AVI,MKV,MP4,M4V,WEBM,MPEG4
Language Multi-language
I/O Port 1 x Micro USB port
1 x 3.5mm Earphone port
1 x TF card slot(Max Support 128G)
2 x Micro SIM Card slot
Battery 8000mAh
Weight 550g
Size 241.7*172*7.9mm
In Box
1 x CHUWI Hi9 Air Tablet PC
1 x USB Cable
1 x Charger
1 x Adapter (the adapter depends on the country of the buyer.)
Home page https://en.chuwi.com/
Image of Front
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image of Back
Image of Buttons
Videos
Chuwi Hi9 Air, Unboxing, Review.
Review by @Alberto96
How to Update
Android Security Updates go to Settings >System >System Update >Check for update
Wireless Update (OTA) go to Settings >System >About Tablet >Wireless Update >Check for updates >Download >Install now >OK and System reboot.
Backup NVRAM/IMEI http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Downloads
Tutorial
Flash Tool and MTK Drivers for Windows
Minimal ADB and Fastboot
DA file (place in same directory as flash_tool.exe)
Stock Rom Build number O00623 release-keys 20180506 Unavailable
Stock Rom Build number O00623 release-keys 20180604
Stock Rom Build number O00623 release-keys 20180809
OTA Wireless Update Stock Rom Build number O00623 release-keys 20181010 Settings>System>About tablet>Wireless Update>Local updates>Select file>Install Now
Stock Rom Build number O00623 release-keys 20181122
TWRP created by @Alberto96 Download twrp_3.2.2-0_Hi9Air.zip (Works with Stock Rom 20180604)
Download SuperSU TWRP Zip
Download Magisk TWRP Zip
How to Flash Stock Rom
Download and extract stock ROM
Download and extract flashtool and install mtk driver (disable driver signature enforcement)
Get rid of any chinese characters in directory names
Download da file to flashtool directory
Open flashtool and open da file and open scatter file in stock ROM directory
Click download
Plug in powered off tablet
Wait for ok
Flash not working? Troubleshoot
Ignore any errors
Use flashtool in link
Get rid of any chinese characters in directory names
Open and close flashtool a few times before you click download
How to Root
There are three ways to root.
1. Install twrp then install supersu with zip.
2. Install twrp then install magisk with zip.
3. Flash magisk modified boot.img.
How to install Twrp https://www.xda-developers.com/how-to-install-twrp/
TWRP Custom Recovery created by @Alberto96
SuperSU Download SuperSU TWRP Zip
Install supersu or magisk with zip file using twrp> install
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download Magisk TWRP Zip
MTK Drivers and ADB required
How to install magisk with modified boot.img ;
Backup your data, tablet will be wiped
download patched_boot.img Stock Rom Build number O00623 release-keys 20180506
OR patched_boot.img Stock Rom Build number O00623 release-keys 20180604
OR patched_boot.img Stock Rom Build number O00623 release-keys 20180809
to adb directory in PC
enable developer options, settings, system, about tablet, build number, tap until developer
connect cable to pc
settings, system, developer options, enable oem unlocking
settings, system, developer options, enable usb debugging
allow usb devices
adb reboot bootloader or shutdown and then press power + volume up, select fastboot
fastboot oem unlock
press volume up (yes)
fastboot flash boot patched_boot.img
OKAY
fastboot reboot OR cycle power to reboot, erasing device is normal
restore tablet (copy your data)
Install latest Magisk Manager
run magisk manager
Check for Root with Root Checker
Your Hi9 Air is rooted with Magisk!
Time to Boot 30s
Available space first boot 56.5 GB
7.47/64 GB MB Used
Pre-installed bloat NONE!
How to take a screenshot
Press Power + Volume Down at the same time.
Support. Install latest build before requesting support.
Submit a support ticket with Chuwi here
Known Issues
(Solved) Screen brightness slider doesn't work
(Solved) Settings > Security & Location > Data Protection > Message ( Data Protection has stopped )
(Solved) Battery only charges to 98% with supplied charger and cable.
(Solved) FM Radio not working. Reported by @moksone [/URL]
(Solved) Power button wake up unresponsive. Factory reset or hold power button until reboots. Reported by @moksone
(Solved) Screen is brighter in the center like a rectangle shape. Reported by @moksone Replaced by Banggood
(Solved) Tablet randomising MAC address. Reported by @Yesfan001 (Chuwi aware) Entering serial number and permanent WiFi MAC address
(Solved) Random reboots, freezes.
(Solved) Uncertified Android Device
(Solved) After Reboot Wifi disabled
(Never to be solved) Netflix only works at qHD 960x540
Issues with 4G + Bluetooth
Chuwi Hi9 Air to Chromecast with Google Home App, screen on it's side (Chuwi aware)
(Solved) O00623 release-keys 20180905 Update Bug Settings>System>About tablet>"Wireless Update" replaced with com.adups.fota.MyApplication and disabled. (Chuwi aware)
O00623 release-keys 20180905 Update Bug no.2 Play Store>Settings>Play Protect certification>Device is not certified. If you clear play store data and cache play protect certification disappears.
How to enable Split Screen
Open two apps
Tap and hold android menu or overview button, select second app
You can drag the middle point
Apps tested and working
Advanced Power Menu [ROOT]
Buffer
Control Screen Orientation
Duo
Find My Device
Fitbit
GMD Immersive (hides soft keys)
IFTTT
MacroDroid
Mr. Number
Netflix (qHD 960x540)
Open Camera
Phone Check
Prey
Rolo
Shazam
Signal
Skype
Uber
Waze
Whatsapp
YouTube (Up to 1440p)
Accessories
Cases
Benchmarks
Antutu Pass 1
Antutu Pass 2
3DMark Ice Storm Extreme and Sling Shot Extreme
Geekbench Single Core
Geekbench Multi-core
Geekbench Compute
Geekbench Battery
Androbench (Storage Benchmark)
GPS
Home Screen
Teamviewer
Wifi
2G/3G/4G/LTE Cat 6 Bands (Support for LTE:1/2/3/4/5/7/8/12/17/20/28/38/39/40/41)
Stock Apps
Treble Supported but A-System partition only
Battery Performance Normal Use 7-8 hours
Updates
09/04/2018 I Ordered / pre-ordered
13/04/2018 New video
06/05/2018 Received my Chuwi Hi9 Air yesterday Saturday 05/05/18
10/05/2018 Review posted to youtube see above
11/05/2018 More pictures and info
25/05/2018 Link to cases
04/06/2018 Added links to downloads
05/06/2018 Added how to flash, how to install magisk and updated known issues
18/06/2018 Added alternate download link and updated known issues
20/06/2018 Added TWRP
01/09/2018 Added links to Build 20180809
03/11/2018 Added O00623 release-keys 20180905 Update Bugs
08/11/2018 Download OTA 20181010
28/11/2018 Download 20181122
28/11/2018 All CHUWI tablets with Helio X20, X23, X27(or higher verison) will be updated to Android 9.0 in 2019
14/02/2020 New link to download twrp

Development
Chuwi Hi9 Air Treble supported but A-Only system partition
How to flash a Generic System Image (GSI) on Project Treble supported devices
How to install a GSI (treble) image on Chuwi Hi9 Air thanks to @Emoclaw
LineageOS 15.1 GSI for CHUWI Hi9 Air by @Alberto96
Gearlabs ROM for Chuwi Hi9 Air by @Alberto96 Download Gearlabs ROM v.3
Treble experimentations Chuwi Hi9 Air
How to Install Treble AOSP Android 9 on Chuwi Hi9 Air.
How to Install or Upgrade Android 10 GSI custom ROMs on Chuwi Hi9 Air by @santosst

Looks good. What about Chuwi quality?

jpm_fan said:
Looks good. What about Chuwi quality?
Click to expand...
Click to collapse
I still have my Chuwi V89 from three years ago, still going strong!!!
Edit Sold my V89 ?

With treble support this should be interesting

Chuwi Hi9 Air Preview https://youtu.be/QmikIkAM-vw

Chuwi Hi9 Air is sold exclusively by Banggood.
They sent out the following message today.
Dear customers,
Thanks for choosing Banggood and our products.
We’re sorry to inform you that the preorder for the item [Original Box CHUWI Hi9 Air 64GB MT6797 X20 Deca Core 10.1 Inch 2K Screen Android 8 Dual 4G Tablet] was delayed due to a delay in the manufacturing process.
We’re will do our best to find a solution as soon as possible.
If you don't have the urgency to receive the product, and can wait for your order, after the delivery, you will also receive Banggood Points in your account.
The amount of Banggood Points will be calculated as following:
Less than 7 days delay: 50 BG points
More than 7 days delay: 100 BG points
In case you do not want to wait for the delivery and want to request a full refund of your order, please click on the following link:
https://www.banggood.com/index.php?com=account&t=ordersList
Thank you for your understanding and your cooperation.
Best regards,
Customer Service.

Chuwi Press Release http://en.chuwi.com/news.html
Dear Loyal Customers,
Thank you so much for preorderlng our Hi9 Air on Banggood, please note the price will go back to the suggested retail price of $239 soon.
Congratulations to our dear customers who pre-ordered on Banggood, because you are the first ones to experience the Hi9 Air with Android Oreo.
Our production lines are fully in operation due to the high demand of Hi9 Air, however, we're still a little bit behind schedule as promised.
We want to deliver you the perfect using experience while keeping our strict quality control of every piece of Hi9 Air.
All the pre-orders of Hi9 Air will be delivered to Banggood in a week and start to ship to your front door on 28th April.
We highly appreciate your support and patience.
Sincerely Chuwi
19th April 2018

My Chuwi Hi9 Air shipped this morning, expected delivery 12th May with free shipping.

Still b/o for me ?
Well, my order from 4/15 still on b/o as of today. Hoping for any cell connectivity since the band 4 "disappeared" from earlier announcements! I travel a lot so should be good in row.
Currently running row ROM on nvidia shield tablet but battery life has become terrible in the last few updates. At least it gets hspa+ in USA and LTE elsewhere on the planet. And the big + was never had to wait on ATT to bless an update!
Going to use this Chuwi to replace a pipo m6 pro w/custom rom Itravel with.
Let us know all about it as soon as you get it!
Edit: Now they say shipping 5/15.....maybe I should get interest on the cash I gave them 4/15.....???
Will hold tight. I have time to cancel if the first hands on reviews are terrible!

Received my Chuwi Hi9 Air yesterday Saturday 05/05/18

uncleabubear said:
Received my Chuwi Hi9 Air yesterday Saturday 05/05/18
Click to expand...
Click to collapse
Review please [emoji3]
Enviado desde mi SM-G955F mediante Tapatalk

uncleabubear said:
Received my Chuwi Hi9 Air yesterday Saturday 05/05/18
Click to expand...
Click to collapse
Hi! I just started looking into Chuwi products. I'm anxious to hear your review of the Hi9! I also would like to know why did you choose the Hi9 and not the Hi10?
Thank you!

coffee-turtle said:
Hi! I just started looking into Chuwi products. I'm anxious to hear your review of the Hi9! I also would like to know why did you choose the Hi9 and not the Hi10?
Thank you!
Click to expand...
Click to collapse
Hi, I’m still running some benchmarks, I will post a review soon.
One important point to note, this is the Chuwi Hi9 Air not Hi9. Big difference!

uncleabubear said:
Hi, I’m still running some benchmarks, I will post a review soon.
One important point to note, this is the Chuwi Hi9 Air not Hi9. Big difference!
Click to expand...
Click to collapse
I didn't note that difference, thank you for pointing that out. I have to modify my searches!

deleted

Wireless Update (OTA) (Latest 20180507-1856 Minor bug fixes) Settings >System >About Tablet >Wireless Update >Check for updates >Download >Install now >OK and System reboots. (Screen brightness bug not fixed)

an update!
uncleabubear said:
Wireless Update (OTA) (Latest 20180507-1856 Minor bug fixes) Settings >System >About Tablet >Wireless Update >Check for updates >Download >Install now >OK and System reboots. (Screen brightness bug not fixed)
Click to expand...
Click to collapse
Well, if I should ever receive mine I am glad to see they may update a few things! Ordered 4/15 still not shipped. Thanks much for your unboxing on YT. Hopefully the updates won't disable any wifi or cellular bands!

uncleabubear said:
Chuwi Hi9 Air, Unboxing, Review, Gaming and Root https://youtu.be/6jnJSHE5lck
Click to expand...
Click to collapse
You say in the video that there will be no custom rom flashing due to A-Only, how does that correspond with the fact that A-only system.imgs are available?
AOSP: [https://forum.xda-developers.com/pr...development/experimental-phh-treble-t3709659] RR: [https://forum.xda-developers.com/pr...pment/resurrection-remix-phh-treble-t3767688]
And is the Android Security Patch updated in the new OTA?

7inchTab said:
Well, if I should ever receive mine I am glad to see they may update a few things! Ordered 4/15 still not shipped. Thanks much for your unboxing on YT. Hopefully the updates won't disable any wifi or cellular bands!
Click to expand...
Click to collapse
I checked, all the bands are still there! The LTE is apparently up to cat 6.

Half-gsi - 8.1/9.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
R4 features :
-Disabled logers
-More free memory
-More RAM
-Faster booting
-No trash
-Longer battery live
-Better than stock and stable ROM
-Prerooted - Installed last Magisk
And more features and updates .
Fixed all bug's !!
More information in last topic with last editions : CLICK HERE FOR ENTER LAST THREAD
Installation :
If you are installed not latest stock ROM you can't install my ROM . You need to install last stock rom for correct work .73 .
If you are installed last stock rom you can download zip file with R4 now .
Make backup of actual ROM with boot and recovery .
Let's start :
-Now you have installed last .73 , if not install now. That's was last moment for do that .
-If you are already installed last version stock rom .73 earlier - make a refresh : Install with wipe all .73 (you can save you data and don't wipe data)
-Download flasher with adb here : ADB
-Download and unpack to external sd card R4 ROM - RESTORE PATH : YOUR_XPERIASD CARDTWRPBACKUPSYOUR_DEVICE_ID
-Make backup your ROM
-Turn off device
-Now you can refresh or update your device
-After update/refresh device to last .73 don't allow to turn on device !!!! On finish in the flashtool you see ending , earlier than flashtool finish press vol+ and don't release to moment of blue led . Now you can click on flasher in unzipped ADB folder and release vol+ button . Flasher install new boot and recovery img .
-Ready
-Press two buttons - Vol- and power and wait to enter to recovery (If you see sony logo release vol- and power buttons)
-If you are in recovery choice you language , and enter to restore mode .
-Select folder with my ROM and restore (restore full : boot , system , recovery , not only system . New kernel is patched for new system !!)
-After restore turn off and wait one minute , after one minute turn on your device and wait for boot . Boot animation is off !!
-First boot is max 30 minutes , device can stay on sony logo at this time .
-Minimal battery percentage for do that is more than 50% !!
If you do anything wrong , repeat all !! If not you can hard brick your device .
If you like or download my system , please press Thanks
If you want to buy me a coffee for my work you can use PayPal Thanks [/B]
[url]https://paypal.me/marek10747[/URL]
My Facebook group :
Facebook support group , for all devices !!
NEW UPDATE IS AVAILABLE HERE : DOWNLOAD [url]https://mega.nz/#F!YQNmyCCI!sRrDdqeey7IN4-t3aCLWAw[/URL] Copy link and paste in browser if you can't click on link . Last 8.1 R8 update . Download all files and restore in recovery !! .
R9 8.1 - 2/4/19 - Last for this moment . Next updates soon !!
[url]https://mega.nz/#F!QREiWSQA!aWY-O4ti83BGnFqVsrmNjA[/URL]
IMPORTANT NEWS :
(published: 9/4/19)
Two great updates is coming soon !! Updated is IMS , RIL , System is ready for all mods (deodex !!) , reworked build.prop with new tweaks , better kernel , faster internet , battery capacity is unlocked in software to 3450 from 2300 !! , fixed touch screen and other tweaks in new system !! System to be published soon , patch to be published in the same day (patch is for older system , patch is without boot !! , you must download first boot.img and flash before patch !! )
UPDATE :
30/April/2019
Now is available deodex with system updates for .101 rom .
File you must install via recovery . This update make some apps unstable !! . Before patch your stock system please make backup .
Please wipe only cache and dalvik , DON'T wipe data !! After install your system and apps will to be update to 8.1.1 with april patches . DOWNLOAD HERE
Update 2: Bug with unstable apps was fixed . For correct and stable working all you need my last boot.img (I publish boot.img soon with know/how about update stock system to half gsi)
Update to last ENGINEER edition :
1.Update system to last .101 , turn on device configure if you have new device .
2.Flash boot and recovery primary published for this device from me .
3.Download Deodex and Boot patched .
4.Install new V5 or latest boot.img and flash boot in recovery .
5.Install deodex zip file in recovery .
6.Reboot .
Now you can download build prop editor in play store and change flavor from user to eng or userdebug and reboot .
If you have stock rom this deodex zip and boot.img upgrade your device to last stable rom . If you have android 9 , you can back to stable android 8.1 . This deodex zip is only for last .101 rom !! Soon I publish next upgrade for XA1 unlocking new frequency in EU region ONLY . In this upgrade you must edit manifest file inside and write your model . This update to be for ... flashtool and only for classic variant without plus and ultra . This update unlock frequency in EU and is not tested in US and other variants !! In EU this upgrade make better signal and fix other problems .
May Update is cooming soon !!
1/MAY/19
New update is cooming soon !!
What's new , you can find in bulid.prop . - CLICK HERE
Possibly I share cumulative update with critical patches soon !!
Update is avalaible here .
NEW RECOVERY WITH FIXED UNMOUNTING SYSTEM IS NOW READY !! TWRP 3.2.3.0 IS NOW READY FOR DOWNLOAD.
THIS RECOVERY HAVE ONE FUNNY BUG : CAN'T INSTALL GAAPS . OTHER FUNCTIONS WORKING CORRECT !!
DOWNLOAD HERE
RECOVERY 3.3.0.0 FOR XPERIA XA1 IS NOW READY TO DOWNLOAD . RECOVERY DON'T HAVE BUG'S - WORKING CORRECT !!!!
DOWNLOAD HERE
V2 WITH ADDED BUSYBOX FOR ZIP'S WHAT WANT TO MOUNT SYSTEM FROM SCRIPT NOT MANUALLY .
THIS TWRP IS FOR NORMAL PEOPLES NOT DEVELOPERS . FIRST 3.3.0.0 IS DEVELOPER ONLY , BUT 3.3.0.0 V2 IS FOR ALL USERS.
DOWNLOAD HERE
UPDATE !! : If you want to use VoWifi you need to download Google dialer . In settings you can find connection's and calling via wifi !! Volte sometimes working if your provider allow for volte . For updates and install apps please use apk pure app Possible soon I publish Engineering build for power users and dev's !!
R8 and latest have support for :
-Latest magisk (installed)
-L speed
PATCH :
How to install patch :
-Manual mount system in recovery
-Install patch
-Reboot
If you don't mount system , recovery show the error and don't patch the system !!
Patch is in the same folder where is system for download . Soon I publish new boot.img with fix's bug's in system . Please update boot.img after my publish .
Planned is unlock all bands of this devices for make one device with all bands (other variants form family G31XX too , with support 700mhz for us) :
Networks
G3121 (Xperia XA1)
UMTS HSPA+: 850 (Band V), 900 (Band VIII), 1900 (Band II), 2100 (Band I) MHz
GSM GPRS/EDGE: 850, 900, 1800, 1900 MHz
LTE Bands: 1, 2, 3, 5, 7, 8, 20
G3123 (Xperia XA1)
UMTS HSPA+: 850 (Band V), 900 (Band VIII),1700 (Band IV), 1900 (Band II), 2100 (Band I) MHz
GSM GPRS/EDGE: 850, 900, 1800, 1900 MHz
LTE Bands: 2, 4, 5, 7, 12, 13, 17, 28, 29, 66
G3125 (Xperia XA1)
UMTS HSPA+: 850 (Band V), 900 (Band VIII), 1900 (Band II), 2100 (Band I) MHz
GSM GPRS/EDGE: 850, 900, 1800, 1900 MHz
LTE Bands: 1, 3, 5, 7, 8, 28, 38, 39, 40, 41M
G3112 (Xperia XA1 Dual)
UMTS HSPA+: 850 (Band V), 900 (Band VIII), 1900 (Band II), 2100 (Band I) MHz
GSM GPRS/EDGE: 850, 900, 1800, 1900 MHz
LTE Bands: 1, 2, 3, 5, 7, 8, 20
G3116 (Xperia XA1 Dual)
UMTS HSPA+: 850 (Band V), 900 (Band VIII), 1900 (Band II), 2100 (Band I) MHz
GSM GPRS/EDGE: 850, 900, 1800, 1900 MHz
LTE Bands: 1, 3, 5, 7, 8, 28, 38, 39, 40, 41M
After unlock my version of XA1 have :
(Xperia XA1 UNLOCKED)
UMTS HSPA+: 700 (Band XII), 850 (Band V), 900 (Band VIII),1700 (Band IV), 1900 (Band II), 2100 (Band I) MHz
GSM GPRS/EDGE: 700, 850, 900, 1800, 1900 MHz
LTE Bands: 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 20, 28, 29, 38, 39, 40, 41M ,66
UMTS HSPA+: 5
GSM GPRS/EDGE: 5
LTE Bands: 18
IMPORTANT INFORMATION :
If you want to use my android you must install first gboard and other launcher than stock . You can't wipe data because you get bug's after wipe data !!
Next generation of half gsi with fixed bugs is coming soon !!
I'm looking for users with ultra and plus variants , with last oreo installed . I do half gsi for plus and ultra variant .
​
XDA:DevDB Information
HALF-GSI (8.1/9.0) XA1 all without plus/ultra, ROM for the Sony Xperia XA1
Contributors
MAREK10747, MAREK10747
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Installed last stock rom .73
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2019-04-09
EDIT: If you want to clean up your Xperia with or without install Half GSI you can use now my script removeing trashes . This script I make some time ago for quick make Half GSI from any device with android 6.0+ . This script working too on pie or android Q !! . If you want to know more , what this script remove , you can download zip file and edit updater script in last folder in meta inf . This script you install via recovery , script working on xperia and other devices correct . Click here for download .
If you like my work press thanks or donate me
LAST UPDATE FOR XA1 :
Published 19/may/2019
DOWNLOAD:
DEODEXED
ODEXED
UPDATED BOOT AND RECOVERY TO LAST BUSYBOX 1.30.1 IS READY TO DOWNLOAD. FLASHING ONLY VIA FASTBOOT .
DOWNLOAD HERE
This rom have all my updates to this moment:
-Fixed system bug's
-Fixed kernel bug's
-Updated recovery to last recovery - This recovery have support for treble with low editon , next edition for correct working treble soon .
Instalation:
1.Make backup of your system,boot,recovery
2.Insert your sd card/otg device to pc
3.Find folder twrp and open : Sample of folders: J:\TWRP\BACKUPS\YOUR_DEVICE_ID/NEW_FOLDER_WITH_MY_FILES_TO_RESTORE
4.Copy downloaded files to folder (system first and second file , boot , recovery/fotakernel
5.Insert your sd card/otg device to phone
6.Restore system,boot,and recovery/fotakernel
That's all . Now if you restore files wipe cache and dalvik . Don't wipe data , if you wipe data possibly you get bootloop or brick.
Sometimes system have bug with play store . If you have problem with playstore please install via recovery Gapps for 8.0/arm64/pico . After flash zip with gapps all bug's with play store to be fixed .
EDIT: user's say about big screen problem ... I have problem with my screen and I must use extreme density ... Default density for this device is 320 . If you want to back to normal density please change my density in build.prop to default 320 and reboot . That's all , after change and reboot device back to standard density . This not bug , but my own setting for my screen . Sorry for that .
SUPPORT FOR XA1 IS END NOW . MY ROM IS ACTUALLY WITHOUT SUPPORT AND THIS ROM DON'T HAVE CRITICAL BUG'S . NOW I HAVE MEIZU M6T AND I DON'T BACK TO XA1 . THANKS FOR USING MY ROM ON YOUR DEVICE .
​

Reserved

My TWRP ask for the password to encrypt data. Help me please.
Sorry, my English is not good

hungbui97hp said:
My TWRP ask for the password to encrypt data. Help me please.
Sorry, my English is not good
Click to expand...
Click to collapse
Ignore it and swipe button and continue .

MAREK10747 said:
Ignore it and swipe button and continue .
Click to expand...
Click to collapse
But I don't have sdcard or otg @@

hungbui97hp said:
But I don't have sdcard or otg @@
Click to expand...
Click to collapse
You must buy sdcard min.8gb

MAREK10747 said:
You must buy sdcard min.8gb
Click to expand...
Click to collapse
i flashed boot.img for g3416 twrp asks for password .i got struck in this screen.

Rom is for classic xa1 not plus and ultra !! Ask janjan for port for plus and ultra variant

how to go back to stock kernel

rhul334 said:
how to go back to stock kernel
Click to expand...
Click to collapse
Via flashtool . If you have my system installed dont try to flash stock kernel . After flash stock kernel you show very more errors and bootloop possible . My kernel is optimized for my system, on stock system you use my kernel , but you cant use on my system stock Kernel

i flashed kernel for g416 from another thread.now flash tool shows "error unable to open bundle"
---------- Post added at 01:16 PM ---------- Previous post was at 12:44 PM ----------
can i flash this half gsi rom in my g3416 ?

rhul334 said:
i flashed kernel for g416 from another thread.now flash tool shows "error unable to open bundle"
---------- Post added at 01:16 PM ---------- Previous post was at 12:44 PM ----------
can i flash this half gsi rom in my g3416 ?
Click to expand...
Click to collapse
No it's only for standard xa1 not plus or ultra

Sony Xperia XA1 plus 3426
Can a port be made available for Sony Xperia XA1 plus 3426, cause this has better battery capacity of all the XA1 PHONES AND is dual sim compatible. Thanks

makefriends85 said:
Can a port be made available for Sony Xperia XA1 plus 3426, cause this has better battery capacity of all the XA1 PHONES AND is dual sim compatible. Thanks
Click to expand...
Click to collapse
Ask janjan , maybe he do port for plus and ultra .

How can I install latest Stock ROM (.73) ? I cannot find any info about it online. My G3121 has unlocked bootloader so I haven't received any updates in two months. I am curently on the stock rom. I also dont have TWRP. Couldn't install it unfortunately. Any help would be appreciated

AltugOS said:
How can I install latest Stock ROM (.73) ? I cannot find any info about it online. My G3121 has unlocked bootloader so I haven't received any updates in two months. I am curently on the stock rom. I also dont have TWRP. Couldn't install it unfortunately. Any help would be appreciated
Click to expand...
Click to collapse
You can use flashtool (This destroys all data on your phone-make sure to back up)
1. Download flashtool, use torrent if you can, (or you can just wait 40 minutes for normal download)
2. Install drivers (c/flashtool/drivers/driver.exe) install drivers the 2 first can't remember the names
3. Launch flashtool
4. Press xperiafirm in the top screen
5. In the left select your xa1 variant
6. Find firmware for your region
7. Download it
8. Load script
9. Click on the thunder icon top left select flashmode
10. Select your firmware
11. Press wipe (userdata and cust-reset)
12. Press flash
13. Flashtool will show you how to do rest of it
hope this will help you, maybe some of this has changed its some time since I have updated my xa1
UPDATE:
I found a detailed toturial how to do this.
https://www.hardreset.info/devices/sony/sony-xperia-xa1/faq/firmware-flash/

Where i can find .73 version for europe? xperifirm have only .50

Report
i just installed R4 Version. when i try to open developer options, the settings app close, and it says that's stoped.

Last update of 8.1 r8 is available to download . For download click on actual link in the thread . (read thread and find new link for download )

Actually XA1 with my last rom support the same apps as Pixel XL . If you have problems with apps update in play store write to me pm . That was not system bug , but updater's bug if you use updater or if you don't do full update and you have stock system or boot etc.

[BSKO] Galaxy S10 (SM-G97xF) OFFICIAL OneUI2/10 (NO ROOT/CUSTOM ROM TALK!!!)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL S10e / S10 / S10+, SM-G97xF, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the S10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the G97xFXXS3ASII build! (Radio/CP & CSC must be on ASIE) -> Link can be found HERE
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )
How to install the UPDATE.ZIP to your S10 (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
S10+:
Beta1 (14 Oct) ASII -> ZSJ8: G975F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta1 (24 Oct) ASIG -> ZSJF (You must be on the Indian ASIG-build (AP/BL: ASIG, CP/CSC: ASIE)): G975F_ASIG_ZSJF
Beta2 (25 Oct) ZSJ8 -> ZSJF: G975F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G975F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G975F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G975F_ZSK3_ZSK9
Beta5 (18 Nov) ZSK9 -> ZSKF: G975F_ZSK9_ZSKF (thanks to @Robert Smali)
Beta6 (21 Nov) ZSKF -> ZSKJ: G975F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G975F_ZSKJ_ZSKL (Thanks to SamMobile)
Stable/Final (28 Nov) ZSKL -> BSKO: G975F_ZSKL_BSKO
S10:
Beta1 (14 Oct) ASII -> ZSJ8: G973F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta2 (25 Oct) ZSJ8 -> ZSJF: G973F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G973F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G973F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G973F_ZSK3_ZSK9 (thanks to @runtime_Err0r)
Beta5 (18 Nov) ZSK9 -> ZSKF: G973F_ZSK9_ZSKF (thanks to @runtime_Err0r)
Beta6 (21 Nov) ZSKF -> ZSKJ: G973F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G973F_ZSKJ_ZSKL (thanks to @runtime_Err0r)
Stable/Final (28 Nov) ZSKL -> BSKO: G973F_ZSKL_BSKO
S10e:
Beta1 (14 Oct) ASII -> ZSJ8: G970F_ASII_ZSJ8
Known BUG: https://forum.xda-developers.com/showpost.php?p=80532611&postcount=161
Beta2 (25 Oct) ZSJ8 -> ZSJF: G970F_ZSJ8_ZSJF
Needs to be installed with the "SD-Card method"!
EMERGENCY UPDATE (29 Oct) ZSJF -> ZSJL: G970F_ZSJF_ZSJL
Beta3 (07 Nov) ZSJL -> ZSK3: G970F_ZSJL_ZSK3
Beta4 (15 Nov) ZSK3 -> ZSK9: G970F_ZSK3_ZSK9
Beta5 (18 Nov) ZSK9 -> ZSKF: G970F_ZSK9_ZSKF (thanks to @Robert Smali)
Beta6 (21 Nov) ZSKF -> ZSKJ: G970F_ZSKF_ZSKJ
Beta7 (25 Nov) ZSKJ -> ZSKL: G970F_ZSKJ_ZSKL (Thanks to SamMobile)
Stable/Final (28 Nov) ZSKL -> BSKO: G970F_ZSKL_BSKO
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Bixby - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!

henklbr said:
In this thread, we'll post the UPDATE.ZIP files (when available).
Click to expand...
Click to collapse
Glad to find you again on these subforums mate! :victory:
Felt the need to thank you and all the guys making beta updates possible worldwide!
Regards

@henklbr thanks we are all counting on you!!!

Beta has been delayed.
https://www.sammobile.com/news/galaxy-s10-one-ui-2-0-beta-delayed/

iamnotkurtcobain said:
Beta has been delayed.
https://www.sammobile.com/news/galaxy-s10-one-ui-2-0-beta-delayed/
Click to expand...
Click to collapse
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R

corsicanu said:
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
Click to expand...
Click to collapse
Wow...

Hi, I know it's not on the compatible list but I have this feeling that it might be compatible.
G975FXXU3ASIG
CSC G975FOWO3ASIG
G975F/DS
Thanks

rmarcus said:
Hi, I know it's not on the compatible list but I have this feeling that it might be compatible.
G975FXXU3ASIG
CSC G975FOWO3ASIG
G975F/DS
Thanks
Click to expand...
Click to collapse
Read the first post...
No: it's NOT compatible!

corsicanu said:
Idk what to say... Someone at phonearena is probably already running on beta 1
https://www.facebook.com/PhoneArena/photos/a.10150238082179598/10157512410184598/?type=3&__tn__=-R
Click to expand...
Click to collapse
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!

henklbr said:
We saw this too at SamMobile; we asked PhoneArena for more info: NO reaction at all!
No-one at our office has the possibility to install the update yet, neither are people from the German Samsung community!
Click to expand...
Click to collapse
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!

corsicanu said:
I'm aware of the fact they are the only one to come with this and 0 useful information attached, but the "Update: We reached out to Samsung and the company confirmed to us that the beta program has indeed been delayed. No new date has been provided yet." is doubtful too imho since this was posted on Samsung forums, furtherly thinking at this picture being posted more recently than the korean delay announcement.
Don't get me wrong, i'm not trying to start a riot or something, i just still think and hope they will deliver beta today at some point in Germany.
All the best!
Click to expand...
Click to collapse
I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea...

henklbr said:
I'm afraid the Beta has indeed been delayed, because we (SamMobile) got the news from Samsung Korea...
Click to expand...
Click to collapse
Did they mention at any point worldwide beta was delayed or only korean? I'm trying to understand why did Samsung Germany posted those things while it was already conclusioned as delayed..

corsicanu said:
Did they mention at any point worldwide beta was delayed or only korean? I'm trying to understand why did Samsung Germany posted those things while it was already conclusioned as delayed..
Click to expand...
Click to collapse
No: they did not...
So: have a little more patience, that's all we can say...

So only those with the October security patch could use the update.zip?

Monigote97 said:
So only those with the October security patch could use the update.zip?
Click to expand...
Click to collapse
Yes, and multi csc oxm

henklbr said:
No: they did not...
So: have a little more patience, that's all we can say...
Click to expand...
Click to collapse
Speaking of phonearena, they were probably working on this:
https://www.phonearena.com/news/And...0-Hands-on-with-all-the-new-features_id119559

Now we know

Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!

kazim.asghar said:
Hi OP. Have you captured the update URL? If you have, Can you please share the URL so other people can also try to pull the update!
Click to expand...
Click to collapse
Read the 2nd Paragraph of message #1:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. @CyberJ0hn )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
There is NO URL yet! When it's available, you can find it in this thread (maybe)...

I don't really get your reasoning on creating this thread.
You create a full readme on how to update and which devices but without the actual download and then you refrain people asking for updates. This is basically calling these questions upon yourself.
Even worse, you act like some community manager that has to handle thousands of requests day by day by your impolite responses. What did you actually expect what would happen?
Nevertheless, nice guide. Can't wait till beta releases for our devices!

[BSL7] Galaxy Note10+ (SM-N975F) OFFICIAL OneUI2/10 beta (NO ROOT/CUSTOM ROM TALK!!!)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the INTERNATIONAL Note10+, SM-N975F, only!!!
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
If you "can't wait" for the UPDATE.ZIP, pull it yourself and post it here!
Samsung is starting a Beta-program Android 10/OneUI 2 for the Note10-series. In this thread, we'll post the UPDATE.ZIP files (when available).
REMEMBER: don't install these files if you want to have a STABLE phone! As this is a BETA, it's possible the firmware isn't BUG-free!
The UPDATE.ZIP files are pulled from a GERMAN (DBT)-device; be sure your device is on the N975FXXU1ASJ2 build! (Radio/CP & CSC must be on: ASIC (Radio/CP) & ASJ2 (CSC))
The UPDATE.ZIP can be installed on devices with the following CSC's:
SM-N975F OXM multi-CSC:
ACR AFG AFR ARO ATO AUT BGL BNG BTC BTU CAC CAM CAU CHO COO CPW DBT DKR DOO ECT EGY EON EUR FWD GLB GTO ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MXO MYM NEE NPL NZC OPS ORX PAK PEO PHE PHN ROM SEB SEE SEK SER SIN SIO SKZ SLK SMA SMP STH TEL THL TNZ TPA TPH TTT TUN TUR VAU VNZ XEF XEH XEO XEU XEZ XFA XFE XFV XME XFG XNZ XSA XSP XTC XXV
How to install the UPDATE.ZIP to your Note10+ (by @madvinegar ); YouTube-video by SStech
ADB-method:
1. Download SDK platform tools from here https://developer.android.com/studio/releases/platform-tools
2. Extract them on your desktop.
3. Inside the extracted folder put the update.zip
4. Inside this folder, holding left shift, right click the mouse and select "open command prompt here". The command prompt will open.
5. Shutdown the phone.
6. Holding power+bixby+volume up buttons, enter into recovery mode.
7. Select "update via ADB". (you scroll down using the volume buttons and select using the power button).
8. Connect the phone to the PC using original samsung USB cable.
9. In the command prompt run the following command:
./adb devices
10. Wait to see that the daemon has started and that your device is found.
11. If you device is found, run the following command:
./adb sideload update.zip
The update process will start. You will see a percentage counting. First it will verify, then patch etc. Do not move the cable, disconnect the phone or power off the PC.
Once the process is completed (it takes some time) the phone will boot itself, update the apps and log into your home screen.
SD-card method:
1. Download the bin file and rename it to update.zip (by going to file options in win10 you can select to view the file extensions. This makes the renaming process much easier and safer, and avoids renaming the file to update.zip.zip)
2. Copy it to the root directory of your SDcard.
3. Shut down your phone.
4. Hold simultaneously Power+bixby+volume up buttons to get into stock recovery.
5. Using your volume keys navigate to "update via SdCard" and press power button to select it.
6. Again using volume keys navigate to the file "update.zip" and press power button to select it.
7. Update will start. Leave it till it completes. It will take some time.
8. Phone will reboot by itself and load android.
This will not trip KNOX if done by the method i told
NOTE: THESE UPDATE.ZIP's ARE ONLY FOR DEVICES WITH MULTI-CSC OXM!!!
You can check this, to type in your dialer *#1234#, and check if OXM is in the CSC-build...
Note10+:
Beta1 (28 Oct) ASJ2 -> ZSJF : N975F_ASJ2_ZSJF
You need to be at this build: AP : N975FXXS1ASJ2 - CP : N975FXXS1ASIC - CSC : N975FOXM1ASJ2
Beta1 (08 Nov) ASJG -> ZSK4 : N975F_ASJG_ZSK4 (thanks to @dr.ketan)
You need to be at this build: AP : N975FXXS1ASJG - CP : N975FXXS1ASJ2 - CSC : N975FOXM1ASJ2
Beta1 (14 Nov) ASJM -> ZSK4 : N975F_ASJM_ZSK4 (thanks to SamMobile)
You need to be at this build: AP : N975FXXS1ASJM - CP : N975FXXS1ASJ4 - CSC : N975FOXM1ASJC
Beta2 (18 Nov) ZSK4 -> ZSK8 : N975F_ZSK4_ZSK8 (thanks to @dr.ketan)
Beta2 (18 Nov) ZSJF -> ZSK8 : N975F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N975F_ZSK8_ZSKN (Thanks to GalaxyClub)
Beta4 (06 Dec) ZSKN -> ZSL4 : N975F_ZSKN_ZSL4 (Thanks to GalaxyClub)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N975F_ZSL4_ZSL7 (Thanks to SamMobile)
Stable (13 Dec) ZSL7 -> BSL7 : N975F_ZSL7_BSL7 (Thanks to Cyber John )
Note10:
Beta1 (28 Oct) ASJ2 -> ZSJF : N970F_ASJ2_ZSJF
Beta2 (18 Nov) ZSJF -> ZSK8 : N970F_ZSJF_ZSK8 INSTALL VIA SD-CARD METHOD!
Beta3 (29 Nov) ZSK8 -> ZSKN : N970F_ZSJ8_ZSKN (Thanks to SamMobile)
Beta4 (06 Dec) ZSKN -> ZSL4 : N970F_ZSKN_ZSL4 (Thanks to SamMobile)
Beta5 (11 Dec) ZSL4 -> ZSL7 : N970F_ZSL4_ZSL7 (Thanks to Cyber John )
Stable (13 Dec) ZSL7 -> BSL7 : N970F_ZSL7_BSL7 (Thanks to Cyber John )
RENAME THE FILE TO update.zip
NOTE: after installing the update, CLEAR your cache by going into recovery (VolUP - Power)
If you want to run the BETA-firmware flawlessly, do a FACTORY-reset afterwards... (not necessary, but... )
UPDATING to Beta is your own choice, and I don't take responsibility if something is going wrong!
If you're NOT officially registered, you WON'T receive OTA: you'll have to update everytime MANUALLY with above method!!!
If you want to DOWNGRADE back to Pie: download the latest Pie-firmware for your own CSC, flash AP BL CP & CSC_OXM -> your device will reset afterwards which is mandatory!

In previous BETA releases being able to connect devices such as your watch has been very hit and miss.
There was a thread somewhere about Android 10 and it not connecting to the Active 2 watch. Just something to keep in mind if you are considering updating to the BETA and have such devices

Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"

megatooth said:
Note 10 android beta delayed until 24.10, maybe.
"SAMSUNG LIVE CHAT <SAMSUNG LIVE CHAT
MICHAELA YORKS / CHATE ID: 22459678 MICHAELA YORKS / CHATE ID: 22459678
have lost.
14:23
Welcome! small
Wait a minute, it's about to go Los_13: 21 For the Note10 / Note10 + will be the
Beta program expected from
Good day Marcel Racky. My name the 24.10. be empowered. 14:23
1st Michaela Yorks. I like to help
welter! 14:21 Um, let's just say it
on 21.10
14'24, 7
So hello again, here I am
was just kicked c looks like
that now off with the rest of the information When does the rollout start?
to the beta program for note 10 at German time?
and the 10 plus comes the 14:24
tomorrow? if so when does it start?
rollout ?? Because I suspect that belongs to the more up-to-date information
the start is delayed as it stands at 24.10.
the s10 series 14:24
14:22
For this we are not current
It's us Marcel. Unfortunately, information had before ..
we have a connection error, 14:24
We also turn our customers
have lost. Okay, good to know that's too bad
14:23 again delayed"
Click to expand...
Click to collapse
Yes: was mentioned in my 1st post (1st line)

Wonder if it's to do with the whole fingerprint with screen protector issue that's going on at the minute. Maybe they want to get that in the beta and that's why it's delayed.

Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk

annson08 said:
Wouldn't flashing the update.zip file directly via the recovery menu work? nor not trip knox? When pie beta was released last year for the note9, flashing the update file directly worked. I remember I was at the airport that time and just couldn't wait to get home to flash it so I did everything there with only a charging port available around.
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
We had to flush update.zip via adb on s10 last week.
Anyway, old news, my new n10 is coming Thursday on potential beta day too lol

henklbr said:
6. Holding power+volume up buttons, enter into recovery mode.
Click to expand...
Click to collapse
Note 10 Plus has no Power Button, Probably the Bixby button is meant?

6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.

woodchild said:
Note 10 Plus has no Power Button, Probably the Bixby button is meant?
Click to expand...
Click to collapse
How do you Power-ON your Note10 when it's OFF?

megatooth said:
6. Odin v3.13.3 must be on ,connect cable (original) to your phone then holding VOLUME DOWN + VOLUME UP than connect cable in PC USB = enter into recovery mode.
Click to expand...
Click to collapse
You're saying? ? ?
You DON'T go to "recovery mode" when you're doing this (you'll enter in ODIN-mode!)

More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!

megatooth said:
More specific: odin on, phone off, attach cable to phone, push VOLUME UP + VOLUME DOWN same time, attach cable to usb pc . Voilà!
Click to expand...
Click to collapse
"My" method is much easier, don't you agree?

henklbr said:
How do you Power-ON your Note10 when it's OFF?
Click to expand...
Click to collapse
Yes, that´s right No Power off Button but Bixby Button is Power On button if device off My Mistake

henklbr said:
"My" method is much easier, don't you agree?
Click to expand...
Click to collapse
Yes. It is. Because "my method" is for flash with odin
Another mistake

megatooth said:
Yes. It is. Because "my method" is for flash with odin
Another mistake
Click to expand...
Click to collapse
"My" method can also be used to flash with Odin:
Choose: Boot to Bootloader
And "what" do you mean with "Another mistake"?

henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
I think he means that in relation to my post # 14. I wrote "My mistake"

henklbr said:
And "what" do you mean with "Another mistake"?
Click to expand...
Click to collapse
My mistake !

NOTICE
When, I say WHEN, the BETA is released today, keep following in mind:
Continuously "asking" "where's the UPDATE.ZIP" is NOT DONE!
Be aware, it's NOT very easy to pull the UPDATE.ZIP, and is done by persons in their free time! ( i.e. Cyber John )
Read message #1: all instructions are there!
Not complying with above results in reporting to the Mod's!
Keep this thread CLEAN!!!

three uk devices are sold unlocked apparently, does this mean i dont need to play around with the csc to get the beta to bite??

Development Android 14 Beta 2 OTAs

Android 14 Beta 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This build of Android 14 is best suited for developers and other advanced users. By providing access to Android 14 at an early stage, app developers and other early adopters in our Community are able to start creating even better software experiences. That said, we DO NOT recommend flashing this ROM if you have little to no experience in software development, if you expect to use the device as a daily driver, or if you have no experience flashing custom ROMs.
Changelog
Fixes the issue that red screen flashes when creating a new calendar
Fixes the issue that WLAN malfunctions in certain scenarios
Fixes the issue that red screen is seen when switching from Guest mode to Owner mode in certain scenarios
Known Issues
Pressing the Home key is not responsive on the Lock screen camera page
Locked screen doesn't light up when receiving incoming calls
While both SIM 1 and SIM 2 receive an incoming call successively, the call from SIM 2 won't hang up
Fingerprint may not be added again after being deleted
Device cannot be powered off with the password verification page displaying abnormally in certain scenarios
Preview interface freezes when taking picture with the camera in WhatsApp
Caution!
You should understand there is a risk of BRICKING your phone, read the instructions carefully, and be 100% sure of what you are doing. Please always backup your important data before flashing.
Please note:
These instructions are only for the OnePlus 11. Please ensure the battery level is above 30% and a minimum of 4GB of storage space is available.
Carrier version devices (T-mobile/Verizon) aren't compatible with the Beta builds.
MP version – Stable official version
Beta version – or former Developer Preview version
OBT Version – Open Beta version
MP and OBT to Beta upgrade guide—via Local Install (EU&IN ONLY)
Note: This upgrade method only works for IN and EU versions. NA users please refer to another upgrade guide below. This upgrade method will erase all the contents of the phone, please be sure to backup first.
Download the latest ROM upgrade zip package from the specified server.
Copy the ROM upgrade package to the phone storage.
Go to Settings -> About device -> Version -> Click Build number 7 times and enter the password, now you are in the developer mode.
Go back to Settings -> About device -> Up to date -> Click the top right button -> Local install -> Click on the corresponding installation package -> Extract -> Upgrade -> System upgrade completed to 100%.
After the upgrade is complete, click Restart.
Update successful.
MP and OBT to Beta upgrade guide—via Local Install (NA ONLY)
Note: This upgrade method only works for NA version. IN, and EU users please refer to the upgrade guide above. This upgrade method will erase all the contents of the phone, please be sure to backup first.
Download the latest ROM upgrade zip package from the specified server.
Copy the Upgrade package to the phone storage.
Install this APK . You'll need it to update. Then, open the app -> tap the top right gear icon -> find the upgrade package and tap it -> wait to finish the installation -> tap reboot
After the upgrade is complete, click Restart.
Update successful.
Beta to MP rollback guide - via Local Install (EU&IN ONLY)
Note: This downgrade method only works for EU and IN versions. NA users please refer to another rollback guide.
Note: This rollback method will erase all the contents of the phone, please be sure to backup first. Some applications may be lost after upgrading since the Developer Preview version is underdeveloped, you can restore the lost applications by updating to the latest MP version via Local OTA update.
Download the latest ROM rollback zip package from the specified server.
Copy the ROM rollback package to the phone storage.
Go to Settings -> About device -> Version -> Click Build number 7 times and enter the password, now you are in the developer mode.
Go back to Settings -> About device -> Up to date -> Click the top right button -> Local install -> Click on the corresponding rollback package -> Extract -> Upgrade -> System upgrade completed to 100%.
After the rollback is complete, click Restart.
Rollback successful.
Beta to MP rollback guide - via Local Install (NA ONLY)
Note: This downgrade method only works for NA version. IN, and EU users please refer to the rollback guide above.
Note: This rollback method will erase all the contents of the phone, please be sure to backup first. Some applications may be lost after upgrading since the Developer Preview version is underdeveloped, you can restore the lost applications by updating to the latest MP version via Local OTA update.
Download the latest ROM rollback zip package from the specified server.
Copy the Rollback package to the phone storage.
Install this apk. You'll need it to rollback. Then, open the app -> tap the top right gear icon -> find the downgrade package and tap it -> wait to finish the installation -> tap reboot
After the rollback is complete, click Restart.
Rollback successful.
Please note that if you are not able to click "Local install", you can try the following step to fix it:
Disconnect all Wi-Fi and Mobile data
Go to Settings -> Apps -> App management -> Click the top right button -> Show system -> Search "Software update" in the search bar and tap "Software update" -> Storage usage -> Clear data
Keep all networks disconnected and repeat the upgrade or rollback guide
Ready to get started on the Android 14 Beta 2?
OnePlus 11 NA Version
OnePlus 11 IN Version
OnePlus 11 EU Version
OnePlus 11 GLO Version
Want to go back to Android 13.1? Download the Rollback package from the links below:
OnePlus 11 NA Version
OnePlus 11 IN Version
OnePlus 11 EU Version
OnePlus 11 GLO Version
Or Want to go back to Android 13? Download the Rollback package from the links below:
OnePlus 11 NA Version
OnePlus 11 IN Version
OnePlus 11 EU Version
OnePlus 11 GLO Version
This is an early Android 14 build to give developers an early chance to test their apps with an upcoming Android version. As such, its main purpose is not to collect bugs. If you want to provide feedback about any bugs you face with this build, you can use the official built-in feedback tool by Google.

Steve0007 said:
Android 14 Beta 2
This build of Android 14 is best suited for developers and other advanced users. By providing access to Android 14 at an early stage, app developers and other early adopters in our Community are able to start creating even better software experiences. That said, we DO NOT recommend flashing this ROM if you have little to no experience in software development, if you expect to use the device as a daily driver, or if you have no experience flashing custom ROMs.
Changelog
Fixes the issue that red screen flashes when creating a new calendar
Fixes the issue that WLAN malfunctions in certain scenarios
Fixes the issue that red screen is seen when switching from Guest mode to Owner mode in certain scenarios
Known Issues
Pressing the Home key is not responsive on the Lock screen camera page
Locked screen doesn't light up when receiving incoming calls
While both SIM 1 and SIM 2 receive an incoming call successively, the call from SIM 2 won't hang up
Fingerprint may not be added again after being deleted
Device cannot be powered off with the password verification page displaying abnormally in certain scenarios
Preview interface freezes when taking picture with the camera in WhatsApp
Caution!
You should understand there is a risk of BRICKING your phone, read the instructions carefully, and be 100% sure of what you are doing. Please always backup your important data before flashing.
Please note:
These instructions are only for the OnePlus 11. Please ensure the battery level is above 30% and a minimum of 4GB of storage space is available.
Carrier version devices (T-mobile/Verizon) aren't compatible with the Beta builds.
MP version – Stable official version
Beta version – or former Developer Preview version
OBT Version – Open Beta version
MP and OBT to Beta upgrade guide—via Local Install (EU&IN ONLY)
Note: This upgrade method only works for IN and EU versions. NA users please refer to another upgrade guide below. This upgrade method will erase all the contents of the phone, please be sure to backup first.
Download the latest ROM upgrade zip package from the specified server.
Copy the ROM upgrade package to the phone storage.
Go to Settings -> About device -> Version -> Click Build number 7 times and enter the password, now you are in the developer mode.
Go back to Settings -> About device -> Up to date -> Click the top right button -> Local install -> Click on the corresponding installation package -> Extract -> Upgrade -> System upgrade completed to 100%.
After the upgrade is complete, click Restart.
Update successful.
MP and OBT to Beta upgrade guide—via Local Install (NA ONLY)
Note: This upgrade method only works for NA version. IN, and EU users please refer to the upgrade guide above. This upgrade method will erase all the contents of the phone, please be sure to backup first.
Download the latest ROM upgrade zip package from the specified server.
Copy the Upgrade package to the phone storage.
Install this APK . You'll need it to update. Then, open the app -> tap the top right gear icon -> find the upgrade package and tap it -> wait to finish the installation -> tap reboot
After the upgrade is complete, click Restart.
Update successful.
Beta to MP rollback guide - via Local Install (EU&IN ONLY)
Note: This downgrade method only works for EU and IN versions. NA users please refer to another rollback guide.
Note: This rollback method will erase all the contents of the phone, please be sure to backup first. Some applications may be lost after upgrading since the Developer Preview version is underdeveloped, you can restore the lost applications by updating to the latest MP version via Local OTA update.
Download the latest ROM rollback zip package from the specified server.
Copy the ROM rollback package to the phone storage.
Go to Settings -> About device -> Version -> Click Build number 7 times and enter the password, now you are in the developer mode.
Go back to Settings -> About device -> Up to date -> Click the top right button -> Local install -> Click on the corresponding rollback package -> Extract -> Upgrade -> System upgrade completed to 100%.
After the rollback is complete, click Restart.
Rollback successful.
Beta to MP rollback guide - via Local Install (NA ONLY)
Note: This downgrade method only works for NA version. IN, and EU users please refer to the rollback guide above.
Note: This rollback method will erase all the contents of the phone, please be sure to backup first. Some applications may be lost after upgrading since the Developer Preview version is underdeveloped, you can restore the lost applications by updating to the latest MP version via Local OTA update.
Download the latest ROM rollback zip package from the specified server.
Copy the Rollback package to the phone storage.
Install this apk. You'll need it to rollback. Then, open the app -> tap the top right gear icon -> find the downgrade package and tap it -> wait to finish the installation -> tap reboot
After the rollback is complete, click Restart.
Rollback successful.
Please note that if you are not able to click "Local install", you can try the following step to fix it:
Disconnect all Wi-Fi and Mobile data
Go to Settings -> Apps -> App management -> Click the top right button -> Show system -> Search "Software update" in the search bar and tap "Software update" -> Storage usage -> Clear data
Keep all networks disconnected and repeat the upgrade or rollback guide
Ready to get started on the Android 14 Beta 2?
OnePlus 11 NA Version
OnePlus 11 IN Version
OnePlus 11 EU Version
OnePlus 11 GLO Version
Want to go back to Android 13.1? Download the Rollback package from the links below:
OnePlus 11 NA Version
OnePlus 11 IN Version
OnePlus 11 EU Version
OnePlus 11 GLO Version
Or Want to go back to Android 13? Download the Rollback package from the links below:
OnePlus 11 NA Version
OnePlus 11 IN Version
OnePlus 11 EU Version
OnePlus 11 GLO Version
This is an early Android 14 build to give developers an early chance to test their apps with an upcoming Android version. As such, its main purpose is not to collect bugs. If you want to provide feedback about any bugs you face with this build, you can use the official built-in feedback tool by Google.
Click to expand...
Click to collapse
Eu op11 with oos13.1 eu Update to a14beta 2 eu