Related
I am sure this bit of the question has been asked before so perhaps someone could cut and paste the procedure but I need to unlock this SX56 AT&T phone because I use T-Mobile AND travel abroad quite a lot.
The IMEI number is 350314000995655
(I couldn't find the SX56 model number or the correct ROM code or the Radio number in your pop-down menu so I entered it on the next line)
Unlock procedure
Sorry for last postingjavascript:emoticon('')
Embarassed: Siemens told me that I need an IMEI Number and that AT&T would provide me with an unlock code for this unit with that IMEI number (which obviously they won't)javascript:emoticon(':evil:')
Evil or Very Mad
Is the procedure (for my unit) to ask for an unlock code and then enter it or is it to download
* SD Card Reader
* 1x64Mb+ SD card
* XDATools
* XDA-Developers Special Edition ROM 1.2
1. Backup the existing bootloader and operating system using card reader
2. Extract the XDA-Developers Special Edition ROM 1.2 using Winzip
3. Write the NK.nbf-file (in the directory English) to your Device
4. Running the Programs -> Phone -> XDAUnlock file will remove the SIMlock...
5. after this time, the original ROM could be restored as desired.
And if I need to, can I do all this with Infra Red and sync or with the cradle which connects it to the computer? I cant find any reference to my ROM or Radio numbers in the pull down menu here and am a bit confused by this.javascript:emoticon(':?')
Confused
No, flashing the ROM will not unlock your device. Search for the wallaby unlocker, or check the wiki, as it is there, sticky and has been mentioned before.
Completing unlock process and flashing
I was directed to the flash upgrade program to unlock the device at the XDA-Wallaby Home Page and did flash but nowhere was I given the option to unlock: However the flashing process failed in an unusual and probably not important way: It completed successfully but I have lost the stylus and couldnt figure out how to stop the battery by pushing a fine screwdriver into the hole shown on the host computer screen. All that now shows on the screen is COMPLETED and a number of close-together vertical lines at the far right quarter inch of the screen.
Is there some trick to turning the battery off with some special tool or have I in fact completed the procedure and simply don't know that I have or what to do next? (get to a screen where I can run the XDAUnlock program which I transferred over to the SX56 before flashing the ROM?)
I wonder if I should or need to take the battery off if I Have lost that tool which does this by pushing into the hole on the lower quarter of the unit?
A bit of self-help going on here
So I DO appear to have flashed the ROM and the XDA ROM now appears on the screen although with no real backlight: The DO YOU WANT TO UNLOCK also appears but when YES is pressed, nothing happens. In fact one can see the unit taking the command but nothing further happens and the question just hangs on the screen.
Is this unlocking a command which takes a long time to execute? Or should I cancel out of it and carry on with bringing up the screen and can I execute it later on? Or have I done something major wrong and is there any way of rectifying? Sometimes if I press YES hard enough, the backlight appears for a half second (and the YES command pulsates once) and then goes off. But the question about unlocking still hangs on the screen.
Is this something to do with the program not being able to unlock an AT&T lock? Or has the screen lost sensitivity in some way and if so, (last resource here, improbably necessary) is there a source for Wallaby screens?
FOr the benefit of anyone trying this
NOTE:
After a night of the YES command taking and then not doing anything, I tried MOVING the over-screen by trying to drag it to another position
This didnt work. BUT tapping on the blue bar resulted in a message telling me that the unit was now unlocked. And the 7-8 black vertical lines to the right of the screen now have reduced to one, a quarter of an inch in
(Mind you, tapping on the ok button on THAT screen still mysteriously does nothing. This is a ROM which works in a VERY interesting, unusual and unexpected way!!)
new problem - report of invalid sim
now i am having another problem and am not sure i shoudn't start another thread
'
I did repalce the screen and the unit now starts up and reports invalid sim.
Is there any solution or should I re-flash the rom again and see if that works, hope for the best?
hello i bought a 6315 on ebay, i want to use it in latin america, gsm 1900, i need to unlcok it, room version is A.20.10 i wanted to download the special rom, but the link doesnt work and room folder on ftp is emty, i know is an old phone,can someone help me please unlock it? [email protected]
licensedtoquill said:
now i am having another problem and am not sure i shoudn't start another thread
'
I did repalce the screen and the unit now starts up and reports invalid sim.
Is there any solution or should I re-flash the rom again and see if that works, hope for the best?
Click to expand...
Click to collapse
I found the same happened to me first time and a soft reset did the trick. It may also be that the "Hard Reset" will be needed. I seem to recall that this was what I had to do with a couple of them. If your stylus is missing, a push pin and a bit of control will do. Just shove it in the micro hole at the bottom left of the device and hold it for a few seconds then let it go. If it does not restart on its own, follow that with a "soft reset" by pressing the point of the stylus (or a ball point pen) into the larger hole at the bottom left of the unit.
For the upgrade/unlock rom . . . the best one to which I have access is at:
http://www.landjtech.com/Secure/OutSetting/SX56/xdaunlock2.zip
Hope it helps
Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
please help me
Does a HardReset would help me in this???
The phone has Windows Mobile 5,
The ROM version is 1.15.515.1
Radio Version 4.1.13.42_02.89.90
And it doesn't seem to has any upgrade, so I don't believe it was a mistake in the installation or something. What do you think???
What do I need to eliminate this error and he ask me for the UnlockCode that I have??? That is all!!! PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!
I just did a HARD reset form the FAQ, and now I have from Original but i still get DATA CRASHES message..
For info it was in spanish now....
PLEASE HELP ME!!!
hell.cu said:
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Where did you see the post to fix this? Maybe we can help you with the directions if we read the post.
it was for the wizard device...... i already contact jogw99 haven't receive reply from him.
BTW it was because they want to unlock the device for 3rd party applications and something goes wrong. I only want to unlock the device for Any SIM use.
AND I HAVE THE CODE........... The deal is that i don't know why it came like that. I haven't touched at all....
PLEASE need help !!!
No one????
Is this so difficult. I am really stuck in here... What happends???
Hi, once again, so many people in this fourm and no one could help me???
I just need to know what steps do i need to follow to get the DATA CRASHES error go away!!!
PLEASE!!!!!!!!
hell.cu said:
Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Sorry, i was out for a while.
is your problem already fixed ?
Not yet. Please could you help me???
hell.cu said:
Not yet. Please could you help me???
Click to expand...
Click to collapse
The following should solve your problem.
Good luck !
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.
wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy
hell.cu said:
wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy
Click to expand...
Click to collapse
For CID unlock, try this.
Try the USPL-CID BYPASS to see what happend.
When the screen turn white, choos the rom you want.
OMG!! At last it's working!!
Tried it for several times but now this method works.
For people who couldn't manage the unlock methode try to enter 6 instead of 5 digits after step 1.
Go to the registry, HKCU\System\State\PHONE, and wrote down the first 6 digits of the value of the IMSI entry.
1. type *7465625*638*# to set
2. type the first 6 digits of the value of the IMSI entry here.
3. type your new NCK (12345678), then OK
3. type *#7465625# to check your lock (network lock still enabled)
4. type #7465625*638*# and type your NCK (12345678)
5. enjoy.
old news was posted a few days ago
joeblack2k said:
old news was posted a few days ago
Click to expand...
Click to collapse
Yes but for many people/roms it didn't work. When you do that registry search you'll have the right code immediately.
Samsung M8800
hubo2000 said:
Yes but for many people/roms it didn't work. When you do that registry search you'll have the right code immediately.
Click to expand...
Click to collapse
Hi, guys I can see u had lots of work done on unlocking the Omnia but i did the mistake of buying the M8800 for my girlfriend and cant find the way to unlock it so she can put her simcard...since these codes work for the Omnia, is there a way to adapt them to work on my phone?many thanks and great work u ve done
BICKLARS said:
Hi, guys I can see u had lots of work done on unlocking the Omnia but i did the mistake of buying the M8800 for my girlfriend and cant find the way to unlock it so she can put her simcard...since these codes work for the Omnia, is there a way to adapt them to work on my phone?many thanks and great work u ve done
Click to expand...
Click to collapse
I found this method by searching the forums and googling. I'm not a big geek in this sorry.
this does not work on t*omnia
i have the device running on mobily is saudi arabia. if i input 420032 i get "inncorrect mcc/mnc"
can you use this on vzw omnia i910?
yes, PLEASE, is there a method for the i910
1,000,000 Thx to hubo!
I always had the message "failed to set....". With our describtion i entered 6 numbers and it worked!!!! - lol
Happy ))))
Thx a lot
Neutronsis
P.S.: sorry for worse english, its not my favorite language
help please
Hi guys, i need some help please
it's kind of funny and i'm sure u'll laugh hhhhh
i tried that code *7465625*638*00000000*00000000# on a samsung SGH E250 that was already unlocked... and it was locked on the carrier that was already inside "SFR France", i use that phone when i visit my workers to not make them seem less richer than me so that we can be on the same level at work "u see what i mean" and i have a lot of contacts there.
i tried the #7465625*638*00000000# but it tells me wrong password!! hhh Could you help me to unlock it please??
thank you very much
Unlock your Omnia
I have installed Total Commander - but cannot find the registry. Can someone help me out, please. Not ever used Total Commander before.
I tried on my omnia, and it worked, the network lock disabled (I tried the second description).
But my simlock is still enabled, how can I disable it??
hubo2000 said:
OMG!! At last it's working!!
Tried it for several times but now this method works.
For people who couldn't manage the unlock methode try to enter 6 instead of 5 digits after step 1.
Go to the registry, HKCU\System\State\PHONE, and wrote down the first 6 digits of the value of the IMSI entry.
1. type *7465625*638*# to set
2. type the first 6 digits of the value of the IMSI entry here.
3. type your new NCK (12345678), then OK
3. type *#7465625# to check your lock (network lock still enabled)
4. type #7465625*638*# and type your NCK (12345678)
5. enjoy.
Click to expand...
Click to collapse
I dont have any entry like this in my reg. My phone is not currently active. I want to re-program my omnia i910 from verizon service to GCI wireless in alaska, any ideas?
thanks for code
first time here and would like to thank hubo 2000 after stage 2 of ur method i still got cannot set message so i ignored that and typed in stage 3 code wow got the lock status then followed the rest of ur method and im'e now the proud owner of unlocked omnia i900 ,thanks again
Unlock it using code.
Hello XDA!
A quick thanks to those reading/interested and I apologize in advance if this belongs in the development section. I don't have permission to post their yet (perhaps with good reason!). After much searching, I've come to the conclusion there is, as yet, no free method of network unlocking the Galaxy Wonder GT-I8150.
I want to find a method to do this, test it, and then automate the process through a shell script and/or batch file. If it doesn't cost too much, I'll even try and make an app for it. I have two reasons for doing this: I own this model of phone (surprise!) and more importantly, I want to expand my portfolio of little computer projects because I want a job in IT, and I want it now.
So this thread will serve as a knowledge base and brainstorming place. Please -anyone with ideas about how to go about this - let me know!
Here's what I'm trying at the moment: based on a similar method used to unlock the HTC Sensation (and some other models), I'm going through the mmcblk virtual partitions after copying them to a .txt file (filetype is binary, .txt is just so my girl's Mac opens them with a text editor). Using a grep command with a regular expression I'm pulling every single 8 character long string of only digits and exporting the result to another txt file.
I then search the mmcblkXpXX file for these 8 long strings one at a time, trying to read through what I can of the binary file for giveaways like "isim_auth_key" or what not.
I started yesterday so I'm only up to mmcblk0p06.
If you have a network unlocked version of this phone, I might end up needing certain files to compare, but I won't ask unless I think I'm onto something.
Finally, if anyone has found an NV_data.bin, bml5 file (or equivalent) for this model, tell me what it's called! Or where I need to extract it from.
Thanks in advance,
GrayedFox
Info
Here are some links to information about unlocking various models of phones, using slightly different methods, for those interested. None apply directly to the gt-i8150 but I'm trying to tweak them just as a starting point.
http://forum.xda-developers.com/showthread.php?t=828534
http://forum.xda-developers.com/showpost.php?p=17148825&postcount=334
http://forum.xda-developers.com/showthread.php?t=1693491
http://forum.xda-developers.com/showthread.php?t=1335548
http://forum.xda-developers.com/showthread.php?t=1064978
Here is some information from my mmcblk0p06 file... wrapped in spoilers.
PERSO: Failure to write: %sPerso Command can be handled only on a provisioned session or when Card is not present on slotmits/perso.txt
[first mention of a person.txt file I've found]
EFS file read successfully [this implies there IS an efs file somewhere…]
EFS: Creating ISN file
EFS store sequence number
EFS: ISN file not present
AMSS\products\7x30\core\securemsm\smetest\test_crypto\src\sectestcipher.c
if anyone knows how to access that perso.txt file listed, please post the linux command here!
I'm afraid to say I'm running out of ideas here I've pulled every single mmcblk file on the phone - on stock rom and on cyanogenmod - looking for some sort of reference to a network unlock key but it's just not there. I even got Vodafone to send me my unlock key and have been searching the files for the exact key but it's no where on the phone.
I've even data dumped each of these files too - with an authenticated and nonauthenticated sim (network unlocked and network locked) sim and searched using a hex editor. I will have to move on to another project soon, but perhaps this will serve as an informing post for some: let it be known, there are absolutely NO references to an unencrypted network unlock key for this model of phone on stock rom.
Not in any of the mmcblkXpXX files (where most unlock keys are found for other phones) - and I've searched hard.
if anyone has further suggestions I'll remain subbed to this thread. Peace.
Probably they save a lock code, and the unclock is calculated with that lock code and IMEI.
GrayedFox said:
I'm afraid to say I'm running out of ideas here I've pulled every single mmcblk file on the phone - on stock rom and on cyanogenmod - looking for some sort of reference to a network unlock key but it's just not there. I even got Vodafone to send me my unlock key and have been searching the files for the exact key but it's no where on the phone.
I've even data dumped each of these files too - with an authenticated and nonauthenticated sim (network unlocked and network locked) sim and searched using a hex editor. I will have to move on to another project soon, but perhaps this will serve as an informing post for some: let it be known, there are absolutely NO references to an unencrypted network unlock key for this model of phone on stock rom.
Not in any of the mmcblkXpXX files (where most unlock keys are found for other phones) - and I've searched hard.
if anyone has further suggestions I'll remain subbed to this thread. Peace.
Click to expand...
Click to collapse
Hello
while searching for sim unlock i found this method for galaxy s4 mini could you check if it work with our wonder device?
here -> http://forum.xda-developers.com/showthread.php?t=1693491
Regards
Hello!
I need help regarding a Redmi Note 8 that no longer accepts the correct pattern and is locked.
I'm looking for a solution that would allow me to either unlock my phone without data loss, or make a backup of the phone's internal storage on an sd card/pc before hard resetting.
The device is not rooted and I don't have custom recovery installed. USB Debugging is on, but my laptop is not authorized.
With Adb, the device is detected but unauthorized. It seems to be detected normally in fastboot mode. I was able to get my laptop to detect it in recovery mode by clicking on "Connect with MIAssistant" while it was plugged in, but only in sideload mode. I also somehow managed to get into safe mode, but I used the stock screen lock, so unless there's something else that can be done in that mode, it doesn't seem useful in this situation.
I tried the actual MIAssistant software but it tells me to update my device before connecting. From what I found, this is because it doesn't even work with phones running Android 6.0 Marshmallow or above, so that seems to be a dead-end, unfortunately. Downloaded from here, updated to version 3.2.1.3111. If there's a newer version that could support my device, even an untranslated one, I would love to know, but I couldn't find a working one.
I had some ideas that could potentially solve my problem, but couldn't find a way to actually execute them, so here they are in case someone out there who knows more than me could help me with one of them.
1, Is there any way I could authorize my laptop for USB Debugging without being able to accept the prompt on screen?
2, Is there a way to make a backup of the internal storage of my phone in fastboot/sideload mode?
3, Is there a way to get adb to detect this device normally in recovery mode, instead of in sideload mode?
4, Is there a way to get my device into mtp/ptp mode instead of charging mode when connected to a PC without USB Debugging so I can copy my files?
5, Here's a thread I found that seems promising, although it's old. Could I somehow use this, or a similar method on Redmi Note 8? The Recovery Mode is much more limiting on this device, unfortunately, so I can't exactly follow this tutorial. Are there alternatives that can be done in adb fastboot/sideload mode, perhaps?
6, If I am forced to hard reset, is there any software out there that could recover at least some of the deleted data afterwards, or is everything lost in case of a reset?
I am open to new ideas not listed above, as well. I am not a very advanced user so I probably missed some things.
Thank you so much for any answer in advance!
zoey_96 said:
Hello!
I need help regarding a Redmi Note 8 that no longer accepts the correct pattern and is locked.
Click to expand...
Click to collapse
do you have the default recovery ? or a custom one ?
zoey_96 said:
Is there any way I could authorize my laptop for USB Debugging without being able to accept the prompt on screen?
Click to expand...
Click to collapse
No
loopypalm said:
do you have the default recovery ? or a custom one ?
Click to expand...
Click to collapse
Default, which doesn't have many options on Xiaomi. :/
loopypalm said:
No
Click to expand...
Click to collapse
Sad to hear that. Are there any alternative options that could solve my problem? I'd really rather not factory reset.
zoey_96 said:
Default, which doesn't have many options on Xiaomi. :/
Click to expand...
Click to collapse
if you had twrp or similar your problem would be solved ...
zoey_96 said:
Are there any alternative options that could solve my problem?
Click to expand...
Click to collapse
not as far as i know, ask in ADB thread if you find any
Updated with extra info in case anyone else has any ideas.
Even if you can copy your files to PC, they are problably unusable because of encryption.
That is why you need that pattern
For security this is exactly what you want, if your phone is lost or stolen.
Elinx said:
Even if you can copy your files to PC, they are problably unusable because of encryption.
That is why you need that pattern
For security this is exactly what you want, if your phone is lost or stolen.
Click to expand...
Click to collapse
Do you mean that the reason it doesn't accept the correct pattern anymore is for security? I would have thought it would still accept the correct one, at least after several tries of the same thing. Being completely locked out even when you know the correct password is a little strange to me.
zoey_96 said:
Hello!
I need help regarding a Redmi Note 8 that no longer accepts the correct pattern and is locked.
I'm looking for a solution that would allow me to either unlock my phone without data loss, or make a backup of the phone's internal storage on an sd card/pc before hard resetting.
The device is not rooted and I don't have custom recovery installed. USB Debugging is on, but my laptop is not authorized.
With Adb, the device is detected but unauthorized. It seems to be detected normally in fastboot mode. I was able to get my laptop to detect it in recovery mode by clicking on "Connect with MIAssistant" while it was plugged in, but only in sideload mode. I also somehow managed to get into safe mode, but I used the stock screen lock, so unless there's something else that can be done in that mode, it doesn't seem useful in this situation.
I tried the actual MIAssistant software but it tells me to update my device before connecting. From what I found, this is because it doesn't even work with phones running Android 6.0 Marshmallow or above, so that seems to be a dead-end, unfortunately. Downloaded from here, updated to version 3.2.1.3111. If there's a newer version that could support my device, even an untranslated one, I would love to know, but I couldn't find a working one.
I had some ideas that could potentially solve my problem, but couldn't find a way to actually execute them, so here they are in case someone out there who knows more than me could help me with one of them.
1, Is there any way I could authorize my laptop for USB Debugging without being able to accept the prompt on screen?
2, Is there a way to make a backup of the internal storage of my phone in fastboot/sideload mode?
3, Is there a way to get adb to detect this device normally in recovery mode, instead of in sideload mode?
4, Is there a way to get my device into mtp/ptp mode instead of charging mode when connected to a PC without USB Debugging so I can copy my files?
5, Here's a thread I found that seems promising, although it's old. Could I somehow use this, or a similar method on Redmi Note 8? The Recovery Mode is much more limiting on this device, unfortunately, so I can't exactly follow this tutorial. Are there alternatives that can be done in adb fastboot/sideload mode, perhaps?
6, If I am forced to hard reset, is there any software out there that could recover at least some of the deleted data afterwards, or is everything lost in case of a reset?
I am open to new ideas not listed above, as well. I am not a very advanced user so I probably missed some things.
Thank you so much for any answer in advance!
Click to expand...
Click to collapse
Howdy bro (I also have a Xiaomi Redmi Note 8).
I've been almost two intense weeks reading and watching the XDA forum, trying somehow and I did not find the way to unlock it .... Besides that I have the Bootloader disabled it makes me more difficult, because for that I need to format my phone and is what I do not want .... Already today is my last day of searching and I think I will have to leave my memories behind and Format my cell phone.
I leave you a thread of a user that explains well the process of why you can not:
A Comprehensive Guide to getting Past the Android Pattern Lock Screen
So, here's the situation I’m in. Also I am 99% sure I got something wrong so please tell me. I’m past the pattern lock screen so ADB won’t directly work to unlock the lock screen. If I was at a pattern lock screen, I could use ADB to unlock the...
forum.xda-developers.com
and several more of the many threads that I searched, maybe it will help someone:
[Xiaomi] How to unlock phone after forgetting the password.
Hello, today it happened that I forgot a password to my phone. I've tried to restore it by logging in into my xiaomi account and my google account. Unfortunately it only offers to wipe my data, which I want to avoid at all costs. I have Poco F2...
forum.xda-developers.com
[Android][Guide]Hacking And Bypassing Android Password/Pattern/Face/PI
- DISCLAIMER - This Is For Educational Purposes Only You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices Files And Tutorials Are...
forum.xda-developers.com
[Android][Guide]Hacking And Bypassing Android Password/Pattern/Face/PI
- DISCLAIMER - This Is For Educational Purposes Only You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices Files And Tutorials Are...
forum.xda-developers.com
[GUIDE] Unlock bootloader without losing user data.
Hi, I am writing this guide because many people followed other guides in the forum and lost their data. This is the proper way of unlocking the bootloader without losing your data. 0 - Read the whole guide before proceeding and proceed at your...
forum.xda-developers.com
[GUIDE] Redmi K20 Pro - Unlock & Root Information, Links, Tools and Instructions
Like many, I was overwhelmed with information when trying to unlock, flash, and root my phone. After many failures, I decided to compile the good information all in one place. I hope this helps. If it does, please consider buying me a beer...
forum.xda-developers.com
Recovery without data loss
Hi Community, you are my last salvation. I am owner of Pixel 4a 5g since half a year and now it cannot boot anymore. I see only the google-"G" and the loading bar nothing else. I can start the Boatloader but before i do a factory reset i need to...
forum.xda-developers.com