Related
*Copied from CM10 FAQ by RaphaelH1427.
ATTENTION: THESE BUILDS WITH KERNEL 3.0 ARE EXPERIMENTAL! QUARX IS NOT RESPONSIBLE FOR BRICKED PHONES, WORLD WAR, ALIEN INVASION, YOUR GIRLFRIEND CHEATING ON YOU OR ANYTHING!
Welcome to the support thread of Quarx's CM10.1!
[CM10.1] Android Jelly Bean 4.2 (By Quarx)
What is this thread for:
Here you can report all your problems of the Quarx's CM10.1 that you have and ask for help to see if it's solvable by others methods that doesn't include posting to the original rom thread.
This thread will be easier for him than look for all reports spreaded in the many pages of his thread, but remember, avoid flood!
Before adding your problem(s):
- Be sure to use the latest version of CM10.1! (Check here!)
- Be sure that your report is not already reported by someone, so use the search button.
Take a look here if you wanna know how to install the ROM, and few things like that: FAQ & FAQ 2 from CM10. :good:
BUG LIST:
Kernel 2.6: BT-Headset is a bit buggy, BT will not work if FM is enabled, some problems with 3G, video recording is not good.
Kernel 3.0: Low speed of USB mass-storage, display do not always wake after sleep, suspend not working correctly.
WHAT WORKS?
Kernel 2.6: Almost everything.
Kernel 3.0: SD-Card, Bluetooth, Torch, Leds, USB (all modes), HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
WHAT DOESN'T WORKS?
Kernel 2.6: BT-Tethering, USB-Tethering
Kernel 3.0: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
TIPS:
-Coming from CM7/CM9/CM10? Wipe Data!
-ALL BUILDS WITH KERNEL 3.0 UNTIL FURTHER NOTICE FROM QUARX ARE BUILDS FOR TESTING PURPOSES, SO IT'S NOT READY FOR DAILY USE!
-Need extra internal space? Use an Minimal Gapps! Download here. (Thanks to xinrag for the tip!)
Remember to not have a screenlock with more than 3x3 if u update from previous build , i had and couldnt put it in ...
Did a factory reset then , flashed 4.2 and gapps 4.2 , booted up first run.
Talk to speech crashes several times at first startup , baseband no good (im in Norway), very weak signal
zer0grav1ty said:
Remember to not have a screenlock with more than 3x3 if u update from previous build , i had and couldnt put it in ...
Did a factory reset then , flashed 4.2 and gapps 4.2 , booted up first run.
Talk to speech crashes several times at first startup , baseband no good (im in Norway), very weak signal
Click to expand...
Click to collapse
Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use.
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
zer0grav1ty said:
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
Click to expand...
Click to collapse
I also cannt find wifi,,,
Tjunkustc said:
I also cannt find wifi,,,
Click to expand...
Click to collapse
Searching does not work, but you can connect manually. works for me.
Are minimal GAPPS 4.2 out there yet?
@Gafanhotz Good idea to creat a new thread for 4.2 :good:
mitchum67 said:
Searching does not work, but you can connect manually. works for me.
Click to expand...
Click to collapse
For me too....
Sent from my MB526 using xda app-developers app
SD CARD can't be mount
zer0grav1ty said:
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
Click to expand...
Click to collapse
SD CARD can't be mount. me too . Defy MB525
yangvincent said:
SD CARD can't be mount. me too . Defy MB525
Click to expand...
Click to collapse
Quarx will solve that in the next build don't worry. It's not working for anyone. It's just a Demo rom so please wait until master quarx releases a daily usable rom.
Sent from my MB526 using xda premium
New unofficial version
After install some times in nany ways and settings I confirmed that new 4.2 version is good for defy hardware and custom kernel.
I still worry when Quarx2k implements the CM feautures if this is bug the rom.
But now...
1 - With or without gapps (4.2 or 4.1.2) the initial settings show erros.
2 - GSM signal is very weak, but phone tottaly functional.
3 - Widgets are not full sized on screen ( all go to left on screen).
4 - Phone with lot of memory and flows very good.
Where can I download gapps 4.2?
I hope the data dropouts i have in CM10 will be solved in CM10.1 but dont have my hopes up to high because they been there so long now that i dont even know when they started, might have been already on CM9 but im not sure.
Another thing that worries me a bit is that the system space is not big enough while internal storage atleast for me is on over 1GB, possible to make the system space bigger?
Cheers?
morteza-25 said:
Where can I download gapps 4.2?
Click to expand...
Click to collapse
Read the first post of CM10.1 of Quarx2k in Development Section
FlashTec80 said:
I hope the data dropouts i have in CM10 will be solved in CM10.1 but dont have my hopes up to high because they been there so long now that i dont even know when they started, might have been already on CM9 but im not sure.
Another thing that worries me a bit is that the system space is not big enough while internal storage atleast for me is on over 1GB, possible to make the system space bigger?
Cheers?
Click to expand...
Click to collapse
We can't resize system rom, because we have locked bootloader & i think 2ndboot will not help. Solution - unistall not need system apps, hint: unistall CMWallpapers - it will free about 10MB in SROM
Could this app solve the SD problem?
http://forum.xda-developers.com/showthread.php?t=1652079
Gafanhotz said:
Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use.
Click to expand...
Click to collapse
can you send me the facebook link? thanks!
sorry for off topic
Why quarx named cm 10.1 as unofficial build but cm 10 is also not official but he dint named it as unofficial builds.
mothy1025 said:
sorry for off topic
Why quarx named cm 10.1 as unofficial build but cm 10 is also not official but he dint named it as unofficial builds.
Click to expand...
Click to collapse
What's the point of this question??
You are in a stupid confusion!
Both are UNOFFICIAL ( Who cares though )
I don't want a tapatalk sig!
Hello,
I post here because I'm not allowed to post in the developpement forum, not enough post...
Yesterday I migrate from [4.3.1][TeamCanjica] CyanogenMod 10.2 to [4.4.2][TeamCanjica] CyanogenMod 11.0, no problem during installation of the ROM, everything okay from this part.
I have an external 32GB sdcard in the phone, and I use the option to swap the internal and external SD card. When an application can be move on sdcard, I put it on it to keep internal memory free.
I personalize my phone putting my favorites applications and widgets in the launcher (Trebuchet or Google, same problem), good. The problem is, when I reboot the phone, all the shortcut of application installed on sdcard disappears, only the shortcut of application on internal memory stay. I have to reconfigure my shorcut after every boot. When I was on CM 10.2, I never get this problem and I use the same config of swapping internal and external sdcard.
The second problem is more annoying. When I receive a phone call, I have a black screen for around 5-8 second. During this time I can do nothing... after this delay the screen appears, and I can answer to the call. Not very fun to be in front of his phone and can't be able to answer !
Don't know if someone have similary problem.
Regards,
Stéphane
PS : sorry for English mistakes, I try to do my best.
I get similar problems with latest tc ROM. Posted a question on the developer forum.
Sent from my GT-I8160 using XDA Free mobile app
Hello V4lve,
So I'm not alone to get these problems, hope the developer will pay attention on it.
It seems we are not the only one to get problem with the version 20140520 of this ROM.
Just have to wait.
Thanks.
Hi, I was thinking about installing CM 11 TC (i'm on CM 10.2) and your post it's been very useful
Somebody says there's no bugs in CM 11 but it seems it is not working perfect yet. I'll wait for next version of CM 11 or even CM 10.2.
Thanks
What's your opinion by now about cm11?
Well...there is no rom that perfect,but the dev are working hard to make those issues gone
So,if u don't like it don't use it (unless,if u want to be a bughunter,u can help the devs)
P.S :sorry for bad english....
[Q&A] [ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4
Q&A for [ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
cavas 4 CM 11 0.19
when will you update the new cm 11 0.19 version for canvas 4 a210??
NeroD said:
Hey Guys Some Good news...!!! I have managed to Port another Kitkat Rom for canvas 4... This time its better than cm11 as its PAC-ROM.. Coming Soon. No ETA. Stay Tuned.
---------- Post added at 02:42 PM ---------- Previous post was at 02:35 PM ----------
Hey Guys Some Good news...!!! I have managed to Port another Kitkat Rom for canvas 4... This time its better than cm11 as its PAC-ROM.. Coming Soon. No ETA. Stay Tuned.
Click to expand...
Click to collapse
canvas 4 a10
0.19 version works fine on my micromax canvas 4 a210. hope to get the cm updates directly on the phone
no.. cm11 0.19 version is not at all stable... i have switched back to 0.17 v of cm11
no.. cm11 0.19 version is not at all stable... i have switched back to 0.17 v of cm11
no network after flashing this rom
Btw,
I haven't flagged gapps, could that be the reason??
network problem
This rom is really nice but i am not able to get network on both the sim cards
Initially i thought it's because of imei no
So i restored imei no using Mobile uncle tools but still no luck..
I flashed the stock rom and restored the imei no again, it all works fine..
Just make sure if i have done everything right, i flashed this rom again but no luck
Tried almost 3 times..
Everything it failed, i reverted back to stock and flashed this again..
Everytime, stock rom works fine..
Note:
I have not flashed gapps..
Notification bar keep popping these messages,
Restricted access changed
All voice services are blocked
Data service is blocked
I turned off 3g but no luck..
Between,
I could not find 'updater-script' in Meta Inf >com>Google location
But i could find in, Meta inf>com>Google>android location
And i have replaced with the file given by you..
Am i doing anything wrong??
Yeah I installed 0.19
I just flashed CM11 0.19 on MMX c4 today, it was my first kitkat rom though and just loved it but there was a sim card bug. It would throw "Restricted Voice Data Access" & "Restricted Data Access" for sim1 & sim2 respectively. And on some one of the thread it was suggested to restore the imei number through mobile uncle tools if not shown in settings>about phone>status; I also dialed *#06# which only showed 1 imei number. But then too, I m unable to register to a network. Due to which I again switched to MIUI v5 Please guyz help me to get out of this plzzz !!
Installed ROM but I have some bugs
1 Multi Sim doesn't work even though i tried the commands in emulator. Please work on this as soon as possible.
2. Could not do USB data transfer, only charging and USB debugging options are available. Rather i dont know how to do data transfer.
3. In camera, I can take pictures but could not record video. The app crashes when tried to capture a video.
4. You can include android market in the ROM.
Tested this ROM on my C4
Hi folks,
I installed this ROM and tested it. This is my first custom ROM installation. But the steps that you had mentioned were clear enough which helped me to install without any hurdles. But please add an instruction to install gapps in the end of installation. For a beginner like me doesnt know how to install play store to get other apps.
I also go the same bugs as reported in bug list:
1. Only one SIM works and it hurts. I am staying in a different state than my hometown. I keep going to my home town often. And so I bought this dual sim mobile, So this custom ROM is a bit negative for me. I hope the developers will work on it soon. Thanks in advance.
2. Video mode in Camera doesn't worked for me.
3. Tried installing whatsapp with ART runtime. I tried many times but I could not. Then I found that its the problem with runtime. Later I changed to the old runtime, rebooted and installed whatsapp without errors. After this I edited the runtime to ART and re-booted it.
4. USB debugging is working fine but I could not data transfer through USB.
maazkazi91 said:
no.. cm11 0.19 version is not at all stable... i have switched back to 0.17 v of cm11
Click to expand...
Click to collapse
Brothers, Severe Sim card problems...... I cant get network on any of the roms not even on the stock !!! please guyz save me !!!!!
I am confused what to do !! please help me out !!! and btw can anyone paste the download link for CM11 0.17 rom ?? Thankx
suggestion
bro gionee elife e3 got kitkat canvas 4 has same specs please port the rom for canvas 4
HI guys!
i am trying to buy a canvas 4 device for porting various roms from scratch
so please be patient
and no ETA
bugs status?
so as ROM is updated to 0.19,,are there any bugs fixed for now,,
i use single sim,,so multiple sim problem doesnt mean anything for me BUT we got 13mp cam,,and can't use it for videos,,thats huge flaw man...plz try something about it...and btw great work on ROM,thnkx
cant flash this rom
when i m flashing ur rom ver .19 showing instalation aborted.....
i m using ur suggected cwm recovery
can u tell me wats the prob????
---------- Post added at 10:57 AM ---------- Previous post was at 10:23 AM ----------
cant flash this rom
when i m flashing ur rom ver .19 showing instalation aborted.....
i m using ur suggected cwm recovery
can u tell me wats the prob????
install cm 11 on my canvas 4 some probs please resolve
i install cm 11 ver .19
my phone is not getting data connection when i reboot the the phone its getting and when i reboot again its not going to connect with my mobile data...
google play is not installing apps say insufficient storage.
to fix this prob i uninstall google play updates but now my play store is not connecting say check ur connection but my net connection is working...
tell me what to do...
Installation aborted
I'm all new to this, but I'm getting installation aborted, without specific error code.
Followed steps same as Page1
Help in instructions.
I am sorry for asking such a foolish question but i am a beginner in this field that's why i want to ask that moreover the instructions are provided above, but i want to confirm that do we have to install the rom and gapps separately? i mean first we have to install rom, then run it for the first time and then install the gapps zip?? Am I correct??
Help Me...!!
hello,
This rom is simply superb....great work bro.....this is very first time i am installing any custom rom to my canvas 4.....i have successfully installed this rom and followed the instructions carefully...every thing is working fine but when i connect my mobile to my pc its not working as MASS STORAGE device..in fact my pc is not at all recognizing it as a mass storage so i am not been able to transfer any file from my pc....please help me to solve this.....other bugs are i)video recording and ii)hotspot.....
I hope somebody here will help me to solve this problem
Thank You.....
Is there any update to CM11 canvas 4? Or anyone please suggest other working ROM for Canvas 4?
i am getting error..
it got aborted...
help me to install it.
Hi,
Anybody has any information about this --> http://www.cmxlog.com/13/lt03lte/ ??
OMG.
Oh man, i am envious on p605, now. I hope p600 will also get official support with working camera and screen mirroring...
Issues
itsita said:
Hi,
Anybody has any information about this --> http://www.cmxlog.com/13/lt03lte/ ??
OMG.
Click to expand...
Click to collapse
It is great news.
I tried 25.03.2016 nightly as I wanted to have some themes on my Tablet. Here are some issues I encountered.
Sim card was not recognized.
Gapps setup failed to start and showed error.
Others I could not test as I was unable to move forward from setup error.
I am back on AOSP 6.01. Works great, rarely display driver fails.
Will try in fortnight time, may be remaining bugs will squashed by then!
drchohan said:
It is great news.
I tried 25.03.2016 nightly as I wanted to have some themes on my Tablet. Here are some issues I encountered.
Sim card was not recognized.
Gapps setup failed to start and showed error.
Others I could not test as I was unable to move forward from setup error.
I am back on AOSP 6.01. Works great, rarely display driver fails.
Will try in fortnight time, may be remaining bugs will squashed by then!
Click to expand...
Click to collapse
Thanks for testing!
The gapps issue is known for all CM devices right now so hopefully it will be fixed soon.
For the sim issue i saw some ril patches merged today so again i guess it's not device specific
I looked through the git of the developer who merged our device and it looks promising... he merged all the sources from the last p607 5.1.1
Wish we could thank him!
Sent from my SM-P605 using Tapatalk
CM13 2016.03.30 Nightly Test
itsita said:
Thanks for testing!
The gapps issue is known for all CM devices right now so hopefully it will be fixed soon.
For the sim issue i saw some ril patches merged today so again i guess it's not device specific
I looked through the git of the developer who merged our device and it looks promising... he merged all the sources from the last p607 5.1.1
Wish we could thank him!
Sent from my SM-P605 using Tapatalk
Click to expand...
Click to collapse
Experience of latest Nightly 30.03.2016
Sim Card does not get recognized.
I got the Gapps working by following this method http://forum.xda-developers.com/showpost.php?p=66094943&postcount=207
Gapps used were http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
OpenGapps does NOT work.
Super User and Xposed Works well.
Themes work.
I am using it for last few hours. ROM is stable and just works except telephony.
Looking forward to have working Telephony!
Thanks to CM for supporting our Note.
Awesome, i will start to test soon as possible
Experience on Update 04.04.2016
Telephony is still working for me. (sim card is not recognized).
I have reverted back to AOSP Rom P605 http://forum.xda-developers.com/galaxy-note-10-2014/development/rom-android-6-marshmallow-t3254901
I wanted themes on my tablet, so tried this Layers Manager https://play.google.com/store/apps/details?id=com.lovejoy777.rroandlayersmanager
It works well on tablet. But before Layers Manager is installed Tablet has to rooted and Busy Box installed. I used this busybox application. https://play.google.com/store/apps/details?id=me.timos.busyboxonrails
Layer themes can be seen here http://forum.xda-developers.com/android/themes/0-themes-official-mega-rro-themes-t3011075
Hope it helps.
For time being I think I would be staying on AOSP.
I hope it helps!
SIM does not work
I install CM 13 on my P605 but my SIM card is death and I lost my IMEI
As we all are encountering the same problem with the SIM card I guess I can conclude it's not because of some stupid mistake of mine
But where can one report bugs in the nightlies? The cyanogenmod JIRA says very clearly that no Nightlies bug reports are to be added to the CYAN project and the NIGHTLIES projects only accepts regressions from the last snapshot... So where to report bugs like ours?
Does cm13 support ntfs filesystem for micro sd-cards?
Yesterday install the version of 13th and I was surprised functioning for good , is the rom less lag 've had in this tablet.Parece the rom progresses quickly , I hope that is compatible soon with Screen Mirroring, S Pen, SIM card and SD Card as it will be the best ROM by far above the rest ...
No choice but to wait a little longer , sorry for my English and because there is already an official thread at XDA ? ...
SL2
Any news about the SIM card issue? Is anybody here using the LTE successfully his/her lt03lte with CM13?
OlafLostViking said:
Any news about the SIM card issue? Is anybody here using the LTE successfully his/her lt03lte with CM13?
Click to expand...
Click to collapse
I installed it yesterday - it was working surprisingly well. From what I could tell, it was working except for the following issues:
1. Can't remap the 'menu' hardware button
2. Camera not working/installed
3. Sim card not working
External SD card, wifi, google apps etc all working nicely.
OlafLostViking said:
Any news about the SIM card issue? Is anybody here using the LTE successfully his/her lt03lte with CM13?
Click to expand...
Click to collapse
I did a clean install of the cm-13.0-20160426-NIGHTLY-lt03lte.zip build but unfortunately the SIM card is still not recognised [emoji22]
Had a brief play and found it running smoothly but I need the SIM to work so it's back to AOSP 6.0.1 for now.
Sent from my SM-P605 using XDA-Developers mobile app
Tried a clean install of the 20160429 Nightly... still no SIM card detection chaps... wonder if @Schischu has committed any of his RIL work to their builds?
I have tried this ROM (cm-13.020160501-NIGHTLY) nothing majorly wrong with it except:
1. I don't have a sim card to test 4g/3g connectivity, so can't test phone/message/GPS functions as well. So these parts are unknown.
2. The quick view drawer (in home screen when you hold from top and swipe down to bring out system/profile/recent notification drawer), it display nothing except basic information like time/date profile head bubble. It will not display ANY notifications even you have new email etc. It always display "No notifications"
3. No lock screen, at all. So you can't preview any information like above. When you press home button it brings up your home screen straight away. If you have pattern lock / pin lock, yes you will have a lock screen normally, however again it will not have any notifications even you have new ones.
4. No USB connection option. On my Oneplus One (bacon) with CM13, when you connect USB cable to the PC, you can choose USB function from "charging" to something like "data transfer" etc. However, on my P605 (lt03lte) it displays nothing (since it can't display any notification). Even after enable USB debugging mode (which is called Android debugging in CM13), enable Debugging notify, changing "Select USB configuration" from "charging" to any other modes, none of above work. This is huge problem for me because this simply means I can't transfer any files from my PC to tablet and the mirco sd card.
5. For some reason all data from my micro sd card are not accessible, or I should say are not naturally supported. When you try to view eg. photos from micro sd card, and open "Gallery" provided, it will shows "0 images/videos available". However, it can be accessed when you go to Settings>Storage & USB>Portable Storage and you will see the micro sd card there. So you can copy files from system storage to micro sd.
6. It takes longer time to boot up compared to my Oneplus One and will have completely black screen (scary long waiting time, estimated about 15 seconds long) when you downloaded and flashed newer ROM. So be patient if you are updating. I experienced that "black screen" every time when I update my ROM or reinstalling through TWRP.
7. Camera not working, not a big issue for me but maybe for some people.
All processes I never experienced any softbrick.
I am not sure if it is just me or everyone is experiencing the same things. I will be glad if someone could point me the right direction to fix any of the above issues...
Other than above it is an awesome ROM, definitely cleaner compared to stock ROM.
If you wish to update to Marshmallow on your P605, I strongly recommend Schischu's Marshmallow ROM from xda-developers. (Google search: p605 marshmallow) It is very stable for me and seems no faults.
I am currently still sticking with "cm-13.020160501-NIGHTLY" ROM and hoping it will fix above issues when updates,
Feel free to ask me any questions,
im finding that i lose root when i upgrade everytime. and when that happens, if i charge with the device and switch it off, the battery icon stays there without disappearing
Ikaruga 斑鳩 said:
If you wish to update to Marshmallow on your P605, I strongly recommend Schischu's Marshmallow ROM from xda-developers. (Google search: p605 marshmallow) It is very stable for me and seems no faults.
Click to expand...
Click to collapse
While I agree that Schischu did good work you should mention that some things aren't working with his ROM, either. My main problem is encryption, for example. The CM is the very first custom ROM I found that is capable of encrypting the tablet (mandatory for a mobile device with personal data of me and other people, in my opinion).
With this rate of updates, soon we will have the best and final rom for our tabletas.He tested rom Schischu , but CM works much the better.You you need to solve the SIM , SD card and S Pen.Solo have to wait , yours would that opened in an official XDA thread to be attentive to feedback from users who are testing ...
SL2
Edit:
This is our maintainer! @Rashed97
Hi Rashed, above are some observations regarding a few bugs in the ROM, which i guess you are aware of.
Thank you for your work!
Well, I'm here again. I create this thread for better manager with both CM12.1 and 13. I need to hear many devs here and not devs.
The first question is, you think is possible to build CM12.1 for T211 ?
The second question, What the error you got when you try to build it ?
In my opinion is possible, but very hard, I don't try yet for 2 reason: First is my CPU limitation, it can't supports OS x64, (if you think I'm lie, You can check my laptop to get 100% assurance). The second reason is the new Run Time Machine ART, on lollipop and marshmallow, touchwiz on 4.4.2 is not compatible with art and obvious I will need the source code KK to build it....
If I begin to build I will need any person here can make all work on computer, I will try to help and give my best. To build cyanogenmod, we need to use x64 ubuntu.
I can't make this work alone, especially for Tab 3 T211 with the different hardware.... I need a help.
I don't put the T210, because I don't have this device. So I can make rom with total stability.... but I think is not to hard if I made CM12.1 for T211 to port it on T210, the difference between is call parts....
I think it is good idea that all will work together on the development for this Device.
But without gr8nole s help we will have no chance ,he has stoped the work on CM11 .
bierma32 said:
I think it is good idea that all will work together on the development for this Device.
But without gr8nole s help we will have no chance ,he has stoped the work on CM11 .
Click to expand...
Click to collapse
You Have tried to build CM12.1 for T210 ? What the problems you find ? Why Gr8nole stopped ?