[ROM][9.0][CAF] RevengeOS 2.5 | Gemini [OFFICIAL][09/01] - Xiaomi Mi 5 ROMs, Kernels, Recoveries, & Other Dev

[ROM][9.0][CAF] RevengeOS 2.5 | Gemini [OFFICIAL][09/01] - Xiaomi Mi 5 ROMs, Kernels, Recoveries, & Other Dev

Reserved
Rom changelog:
https://revengeos.com/changelog
Device Changelog:
09/01/19
- Scrolling screenshot
- Merged Tag LA.UM.7.3.r1-08200-sdm845.0
- Reworked schedtune boost
08/11/19
- Fixed audio issues reported by some users
- Fixed fingerprint sometimes not waking up device
- Fixed some issues with LMKD
- Upstreamed f2fs to latest stable
- Revamped thermals
07/28/19
- Updated bluetooth, cne, dpm, gatekeeper, graphics, vulkan, keystore, media, perf, peripheral manager, post processing, power off alarm, sensors, thermal, time services, tui & wfd blobs from LA.UM.7.5.r1-04800-8x96.0
- Updated Ant+ and audio blobs from LA.UM.7.5.r1-04000-8x96.0
- Updated audio configs, vendor fcm, sec_config, qti permission & whitelist from LA.UM.7.5.2.r1-03300-8x96.0
- Merged LA.UM.7.5.2.r1-03300-8x96.0 into wlan driver & hals
07/09/19
- Kernel rebased on LA.UM.7.5.r1-05300-8x96.0
- Added blobs required for 60 fps video recording
06/19/19
-updated perf and thermal stack from op3: PKQ1.181203.001
-updated GPS, CNE & Post processing blobs from daisy 9/PKQ1.180917.001/V10.0.7.0.PDLMIXM
-kernel: merged LA.UM.7.5.r1-05300-8x96.0
06/11/19
-Minimum required firmware version: 8.11.22
-updated graphics & media blobs from op3 - PKQ1.181203.001
-Fixed brightness not increasing above 40% for some users
-Tweaked thermal configs
-Removed unused blobs
05/15/19
-updated graphics blobs from from LA.UM.7.5.r1-03700-8x96.0
-updated thermal blobs from op3 OPR1.170623.032

Reserved
Xiaomi Mi5 | Revenge OS | Android 9.0 Pie ROM
https://www.youtube.com/watch?v=khbhAo_7EnE

screenshot plz...

marivani said:
screenshot plz...
Click to expand...
Click to collapse
check post #3

Do you have GSI for this ROM?

Nice, Revenge on XDA?

screwfox said:
Do you have GSI for this ROM?
Click to expand...
Click to collapse
Nope
why do you want GSI when we already have device specific ROM?

Hi, only because I'm wanting to test out the mi5 treble project.

Ant+
I've installed the ROM and all is good, apart from Ant+. I use this to connect to a heart rate monitor and cadence meter. I've attached the screenshot from Ant Tester. Is there any chance of getting Ant+ included in a future release? Much appreciated.

havoc
Had to go back to HavocOS until Ant+ support is there. See attached.

screwfox said:
Hi, only because I'm wanting to test out the mi5 treble project.
Click to expand...
Click to collapse
In that case you can try the GSI links provided in treble thread
screwfox said:
I've installed the ROM and all is good, apart from Ant+. I use this to connect to a heart rate monitor and cadence meter. I've attached the screenshot from Ant Tester. Is there any chance of getting Ant+ included in a future release? Much appreciated.
Click to expand...
Click to collapse
QTI Bluetooth hal no longer needs ANT+. That's why i removed it. Contact me in telegram, if possible so that i can share test builds with ANT service

love this rom. minimalist and fast.

dothunt said:
love this rom. minimalist and fast.
Click to expand...
Click to collapse
Glad to hear you liked it
Revenge v2.5 with new kernel is under testing.
Testers are calling it the best pie build
Will push ota after few hours

Very nice ROM. Everything is working good. Battery is acceptable for 3 yo battery. But there are bugs in newest 2.5 version, only mismatch texts and icons in settings. Hope will get fixed in next version. I was dirty flashing from 2.4.

I have the same bug. Entire settings menu icons are mismatched and wrongly name. Is it cause i dirty flashed? Does people who cleaned flash have this problem?

sarnz said:
I have the same bug. Entire settings menu icons are mismatched and wrongly name. Is it cause i dirty flashed? Does people who cleaned flash have this problem?
Click to expand...
Click to collapse
highbud said:
Very nice ROM. Everything is working good. Battery is acceptable for 3 yo battery. But there are bugs in newest 2.5 version, only mismatch texts and icons in settings. Hope will get fixed in next version. I was dirty flashing from 2.4.
Click to expand...
Click to collapse
It's because of dirty flashing. Clean flash is recommended for version changes. You can also fix by deleting
/data/system/package_cache through twrp file manager.
Cheers

RadixCube said:
It's because of dirty flashing. Clean flash is recommended for version changes. You can also fix by deleting
/data/system/package_cache through twrp file manager.
Cheers
Click to expand...
Click to collapse
Deleting /data/system/package_cache works. Thank you very much

highbud said:
Very nice ROM. Everything is working good. Battery is acceptable for 3 yo battery. But there are bugs in newest 2.5 version, only mismatch texts and icons in settings. Hope will get fixed in next version. I was dirty flashing from 2.4.
Click to expand...
Click to collapse
Also dirty flashed,and have no problem.

help, i don't have internet when connecting via wifi, but when i tried to use wifi in safe mode there's no problem

Related

crDroid Pie for herolte

CrDroid Pie for herolte
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download crDroid from here
https://crdroid.net/herolte
Bugs :
You tell me
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.

XDA:DevDB Information
crDroid 4.0 for herolte, ROM for the Samsung Galaxy S7
Contributors
turbolukex5
Source Code: [url]https://github.com/crDroidAndroid[/URL]
Kernel Source Code: [url]https://github.com/ivanmeler/android_kernel_samsung_universal8890[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 4.0
Beta Release Date: 2018-02-16
Created 2018-02-10
Last Updated 2018-02-16

Yay! What's the story on the camera? Is the same fix (forcing API1) from the nougat builds packed in here as well?

harisyks said:
Yay! What's the story on the camera? Is the same fix (forcing API1) from the nougat builds packed in here as well?
Click to expand...
Click to collapse
No... all builds are merged with los15. 1
So the bugs and the quality are the same like los 15.1

Does crDroid have some kind of AOD included?
Wysłane z mojego SM-G930F przy użyciu Tapatalka

harisyks said:
Yay! What's the story on the camera? Is the same fix (forcing API1) from the nougat builds packed in here as well?
Click to expand...
Click to collapse
Pls apply this fix like in the 3.8 version! People like me with sony lenses cant use trhis rom due the crap images taken by third party apps!

Could someone tell me how to do either of the two following things in this rom:
Force 3-dot menu button in apps
or
Change the functions of the multitasking button
I can't seem to find a setting for either and this makes some apps almost unusable (most importantly to me, Titanium Backup)

Changelog | crDroid 4.0 | 04-03-2018
- Fixed HW encoding/decoding (finally) & Improved stability of OMX
- Fixed most of the remaining random reboot issues
- Updated media profiles and codecs config (More file formats should play now)
- Fixed charging with device powered off
- Added support for korean device variants
- NFC chip firmware now updates to latest provided firmware from drivers
- Improvements to audio and ril hal (Check Ivan Meler's github if you really want to know)
- system partition now mounts early in boot proces (Should speed up boot a bit)
- Fixed delay when turning on torch
- Fingerprint sensor doesnt look for fingerprint while screen is off anymore(Moar battery and it was unreliable)
- Synced with crDroid source

04-03-2017_r2
- exFAT support for SD cards has been added
Head over to website on OP for download

turbolukex5 said:
Changelog | crDroid 4.0 | 04-03-2018
- Fingerprint sensor doesnt look for fingerprint while screen is off anymore(Moar battery and it was unreliable)
Click to expand...
Click to collapse
Hello Luke,
could you please share this fix with the devs of LOS? The ticket is created in JIRA. Thank you so much.

12-03-2018
New build online
https://drive.google.com/open?id=10MJi-jNBoqceQh_wXvOa6u1g376_rB1G
I'll post changelog later when I update my new download portal and link to it in this thread.

turbolukex5 said:
12-03-2018
New build online
https://drive.google.com/open?id=10MJi-jNBoqceQh_wXvOa6u1g376_rB1G
I'll post changelog later when I update my new download portal and link to it in this thread.
Click to expand...
Click to collapse
Since installing this build all my google apps keep stopping/crashing...
Even when not using them

ibok said:
Since installing this build all my google apps keep stopping/crashing...
Even when not using them
Click to expand...
Click to collapse
Did you dirty Flash?

ibok said:
Since installing this build all my google apps keep stopping/crashing...
Even when not using them
Click to expand...
Click to collapse
clean flash then. dirty flashes are not officially supported.

ibok said:
Since installing this build all my google apps keep stopping/crashing...
Even when not using them
Click to expand...
Click to collapse
have you try to wipe also System partition before flashing a new version ?

turbolukex5 said:
Changelog | crDroid 4.0 | 04-03-2018
- Fixed HW encoding/decoding (finally) & Improved stability of OMX
- Fixed most of the remaining random reboot issues
- Updated media profiles and codecs config (More file formats should play now)
- Fixed charging with device powered off
- Added support for korean device variants
- NFC chip firmware now updates to latest provided firmware from drivers
- Improvements to audio and ril hal (Check Ivan Meler's github if you really want to know)
- system partition now mounts early in boot proces (Should speed up boot a bit)
- Fixed delay when turning on torch
- Fingerprint sensor doesnt look for fingerprint while screen is off anymore(Moar battery and it was unreliable)
- Synced with crDroid source
Click to expand...
Click to collapse
The fingerprint sensor still unlocks while screen is off. Not sure if everyone is seeing this.
Sweet work BTW!
Edit: I guess it sleeps after a minute or so?
Sent from my SM-G930W8 using XDA Labs

I'm having keyboard problems, it won't switch back to letters if you entered 2nd stage (symbols and numbers) and haven't entered any number.

Any chance you could build an updated version of crDroid 3.8? Given the instability and bugs that LOS15 still has

new website design and new build published at link in OP - changelog come soon

Hi dev, great work, I flash your rom and is all good. Thank you very much !
Sent from my [device_name] using XDA-Developers Legacy app

I'm forget gps issue, but I read in Los thread that is a common problem

[TREBLE][ROM][CAF] RevengeOS 2.2 | Z2 PLUS [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an aftermarket firmware based on CAF (CodeAurora). We are dedicated to fast, stable and mininal customization rom, honesty and communication with our users, and openness with our code,Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device!
Z2 Plus
Build 17/02
ROM changelog
- AMOLED dark theme
- Gradients theming support
- 13 fresh themes available now
- Added Qs tiles row and coloum customisation
- Faster theme update time
- Bluetooth battery indicator
- Added On-call vibration option
Device specific changelog
- V2F migrated
- RIL fixed
- full vndk enabled
- fixed dark gcam video
- added vectors for zuk doze
- spectrum support
- BubbleWrap r3 HMP kernel
Build 7/04
?Source Changelog
- Switch to Retro Music Player
- Fixed weather disappearing after theme change
- Added Auto brightness toggle
- Changed Brightness slider drawable.
- Perfomance enhancements
- Smart Charging
?Device Changelog
- Updated to latest BubbleWrap
- rebased over zukdevs trees
- encryption fixed
-Download the ROM
-Backup each and every partition from TWRP Recovery(optional)
-Make a full wipe (system, data, cache, dalvik)
-Flash RevengeOS Package
- Gapps are included in this ROM
-Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
XDA:DevDB Information
RevengeOS, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Rasenkai99
Source Code: https://github.com/RevengeOS/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP-CAF
Version Information
Status: Stable
Created 2019-02-21
Last Updated 2019-02-21

If it's Your First Time flashing a Treble ROM/ coming from ZUI /Never flashed factory2vendor , you are good to go
If you are coming from treble ROMs with /factory renamed as /vendor (old treble ROMs) , then needs this :
•
Vendor2factory
•
Treble TWRP with /factory support
Steps to follow
1. Flash Vendor2factory zip
2. Flash new TWRP
3. Reboot to recovery
4. Flash new build
•USERS SHOULD MIGRATE TO /FACTORY Supported new TWRP else you get error 7
In case of Custom Kernels ; old ones are no longer supported , those will kick out you to fastboot,
which are updated recently with /factory are usable
AS ALWAYS I WOULD RECOMMEND NOT CHANGING STOCK KERNEL WITH OTHER CUSTOM KERNEL SINCE MY ROMS GO BEST WITH BUBBLEWRAP

reserved -2

reserved for review. ty.

I'm kinda noob on rom threads. I can flash roms almost without problems but don't know what is caf. Can someone explain me "caf"?

nonamesry said:
I'm kinda noob on rom threads. I can flash roms almost without problems but don't know what is caf. Can someone explain me "caf"?
Click to expand...
Click to collapse
CAF means Code Aurora Forum.
https://www.codeaurora.org
ROMs based on CAF are supposed to be better optimised for a specific processor.
http://en.miui.com/thread-902127-1-1.html

broken fast charge
is fast charging broken in every PIE bases OS??? cant even getting 10w charging in any pie based os. Not even in this one.

sign spoofing supported?

Does Miracast work with CAF rom?

ashwinonm said:
Does Miracast work with CAF rom?
Click to expand...
Click to collapse
Is there any pie rom which support miracast?? Btw this rom does not support wireless display

why this ROM is about 800 mb

Mradul01 said:
why this ROM is about 800 mb
Click to expand...
Click to collapse
Bcz it has included gapps

Can I flash other kernel with EAS? Or only hmp?

Thank you @dev & official maintainer, for another amazing rom. We as Zuk users are delighted to have so many custom rom development. About to install.
One question - In this present proliferation of EAS based kernels, why is HMP being used..?

Is zuk z2 gets 2 4g Sims on lte network at a time???

Pavan420 said:
Is zuk z2 gets 2 4g Sims on lte network at a time???
Click to expand...
Click to collapse
Try setting airtel as data sim. See if jio still works. Reply here

Problem
I installed revenge os in my zuk z2 plus, But my u-touch not working. How to customise this. Pls help.

Dev, will you update rom with new bubblewrap kernel?

JV Spartacus said:
Try setting airtel as data sim. See if jio still works. Reply here
Click to expand...
Click to collapse
I don't have Airtel but I've Vodafone but when I set Vodafone as data sim Jio goes no service but in ss both are in network at a time that's why I'm asking

Pavan420 said:
I don't have Airtel but I've Vodafone but when I set Vodafone as data sim Jio goes no service but in ss both are in network at a time that's why I'm asking
Click to expand...
Click to collapse
Its a bug i think.

[9.0_r37][X00TD] LineageOs 16.0 [UNOFFICIAL] Optimized

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0.x (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's special about my build:
Sometimes I pick a few patches from the Lineage Gerrit before they are approved and merged into our trees.
The device trees will also be improved overtime with various improvements from mixed sources (for example better presets, different HAL solutions and so on).
Added Touchscreen gestures (Something similar like Zenmotions )
Added statusbar battery styles
Added Expanded volume pannel
Added SIM Enable/Disable switch
What's working:
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Video Playback
Audio (Record and Playback)
Fingerprint
Sensors
Flash
Notification LED
Enforced
What's not working:
You Tell me
Instructions:
Before installing ROM Zip make sure your running latest pie stable firmware 16.2017.1903.050-20190401
If not then download & flash latest pie stable firmware first from here PIE_20190401_firmware.zip ( Thanks to @Subinsmani )
Installation:
Download & Place ROM & Gapps in your internal storage/virtual SD
Boot into TWRP
Wipe System, Data, Dalvik, Cache.
Flash the latest Firmware if you were not in it yet.
Flash the ROM and GApps.
Reboot and Enjoy.
Downloads:
ROM - AFH Folder
Gapps - https://opengapps.org/ (ARM64 9.0 Nano Recommended)
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
If it is a random reboot, grab /proc/last_kmsg (do not bother getting a logcat unless you can get it just before the reboot, a logcat after a reboot is useless).
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log (only applies to SELinux enforcing builds).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
XDA : DevDB Information
LineageOS 16.0, ROM for the Asus ZenFone Max Pro M1 X00T
Credits:
This is a very important note: I am NOT the original developer of the device trees I'm using. Despite I do my best to fix bugs, improve security, stabilty and the performance of the ROM, it's not thanks to me that this is up and running now.
Please, be sure to thank and donate to the developers behind the device trees.
@krasCGQ For his KUD trees
@SagarMakhar & @Shivam Kumar Jha for Initial LineageOs Bringup
@Subinsmani For help building during initial builds & every knowledge he shared with me
@kylothow for XDA thread template idea.
Contributors:
@rahul9999 , @krasCGQ , @Subinsmani
Source Code: https://github.com/LineageOS
ROM OS Version: 9.0.x Pie
ROM Kernel: Linux 4.4.x
Based On: LineageOS
Version Information
Status: Stable

Changelog :-
All new builds will be appeared here in my AFH Folder - LineageOs 16.0 X00T
New build is up..
16.05.2019
May Security patch
LineageOs upstream changes.
Synced with Latest Kud Changes
Kernel related derp fixed
Added channel bonding for 2.4GHz WiFi
Added Use EIS v2.0
More vendor blobs updated and some were removed unused blobs(will increase performance)
DRM Issue fixed
Sound increased compared to last build (Without any mod) thanks to @Subinsmani
Built in Gcam removed.
Some people might be face cracking sound on speaker, decrease 2 sound levels for now as solution.
Built in Gcam has been removed, as some people are facing issues with that. Use any Gcam as per your choice now.
29.04.2019
Enforcing Selinux (Thanks to @SagarMakhar & @Subinsmani )
Updated blobs from pie stable firmware (Thanks to @Subinsmani )
Widevine L1 Fixes (Thanks to @SagarMakhar )
Reintroduce touchescreen gestures (Thanks to @SagarMakhar )
Built in Gcam 6.2 (Thanks to @Subinsmani )
Added Always-On-Display Support
Notes :
Clean Flash is heavily recommended to avoid any major issues, as I'm using different device tree.
If you're using OpenGapps & found FC while trying to use Gcam then use this old open_gapps-arm64-9.0-nano-20190413.zip
If you're getting FC / Green tint while using Gcam front camera then change base model for front cam & try again.
15.04.2019
Using KUD Trees ( Thanks to @krasCGQ )
Merged April Security Patch
LineageOs upstream changes
Touchscreen gestures (Something similar like Zenmotions )
Updated build fingerprint from stable Pie update
Added SIM Enable/Disable switch
Fixed Whatsapp video call issues
Added statusbar battery styles
Added Expanded volume pannel
Kernel upstreamed to 4.4.178
Merged latest CAF tag LA.UM.7.2.r1-06700-sdm660.0 in Kernel

Reserved 2

LineageOs is here

What is the difference between this and sagar?

Most Awaited ROM !!
Finally.

Awesome..

Do I need to flash latest pie official firmware first?

DinIslamJoy said:
Do I need to flash latest pie official firmware first?
Click to expand...
Click to collapse
yes, as stated in OP above.

Just installed on ZB602KL (Indonesian Version) so far working really well! Thank you!

speed.fastest said:
Just installed on ZB602KL (Indonesian Version) so far working really well! Thank you!
Click to expand...
Click to collapse
Even the in-call sound and speaker working well?

efilah said:
Even the in-call sound and speaker working well?
Click to expand...
Click to collapse
Yes both works well i just tested it.

speed.fastest said:
Just installed on ZB602KL (Indonesian Version) so far working really well! Thank you!
Click to expand...
Click to collapse
From Pie / Oreo ?

gusbalaa said:
From Pie / Oreo ?
Click to expand...
Click to collapse
From Oreo 338 Firmware with Lineage 15.1 Official, i just do format system, data, cache, dalvik, and then flash firmware on this thread, flash this rom, flash gapps and done, magisk works too

speed.fastest said:
From Oreo 338 Firmware with Lineage 15.1 Official, i just do format system, data, cache, dalvik, and then flash firmware on this thread, flash this rom, flash gapps and done, magisk works too
Click to expand...
Click to collapse
Any bugs you find ?

gusbalaa said:
Any bugs you find ?
Click to expand...
Click to collapse
Not yet, im using it daily, battery seems good too.

speed.fastest said:
Not yet, im using it daily, battery seems good too.
Click to expand...
Click to collapse
How it is compared to other heavily loaded custom roms?
Is OTG working? How's the sound output via headphones and speakers?
And any other you want to mention?
Thanks.

ankshious said:
How it is compared to other heavily loaded custom roms?
Is OTG working? How's the sound output via headphones and speakers?
And any other you want to mention?
Thanks.
Click to expand...
Click to collapse
I personally dont like bloated rom so im not try it, but compared to Official Oreo this seems to have same stability level. Sound with speaker is good, with headphone is acceptable but not great. Sadly i dont have any OTG to test. And google camera (GCam_6.2.024_N7P_test1.1) working greats! Photo sample from google camera & Battery performance attached below.

There's no update since last week, as there's no source or device changes..
Next update will be probably after any source / device side changes.

This Rom is enforcing or permissive?

[ROM][10.0][AOSP][4.9] RevengeOS 3.2 Q | REDMI S2/Y2 [YSL] [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device!
YSL with 4.9 kernel "NEW"
YSL with 3.18 kernel "OLD"
What's Working
Everything
BUGS:
Tell to me
Download the ROM
- Backup each and every partition from TWRP Recovery(optional)
- Make a full wipe (system, vendor, data, cache, dalvik)
- Flash RevengeOS Package
- Flash gapps
- Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Like my Work?
Buy me a Beer or Coffee
Donate
XDA:DevDB Information
RevengeOS, ROM for the Xiaomi Redmi S2
Contributors
Its_Vixano, mahajant99
Source Code: https://github.com/mahajant99/kernel_xiaomi_msm8953-ysl
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: any MIUI pie
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 20200515-0831
Stable Release Date: 2020-02-13
Created 2020-02-15
Last Updated 2020-11-16

ss??

kollolshahriar521 said:
ss??
Click to expand...
Click to collapse
Here

Treble Enabled?

chmuhammadsohaib said:
Treble Enabled?
Click to expand...
Click to collapse
yes... only gsi rom, not oem gsi

Baim alif said:
yes... only gsi rom, not oem gsi
Click to expand...
Click to collapse
Sorry, but difference between both?

Thanks For The Rom
Good Rom

chmuhammadsohaib said:
Sorry, but difference between both?
Click to expand...
Click to collapse
oem gsi
ported oem firmware ( miui, OnePlus, one ui, zen ui, etc) as GSI
gsi
Generic System Image ROMs are basically generic custom rom you can flash on any Project Treble compatible. ( revenge OS, evo x, havoc etc)

Great rom thanks for sharing.

Can someone post a screenshot of "Running Services" after installing this ROM?
I just want to see the available RAM without any apps installed.

Changelog of 20200302-1324
ROM changelog :
- Added longshots
- Improved blur stability
- Added initial OTA support
- Initial redesigned ui
Device changelog :
- Switched to Qwerty oc kernel
- Fixed usb tethering
- Fixed ir
- Fixed systemui crash when you change volume mode
- Improved stability
enjoy

got same bugs as lineage OS 17.1?

how can i flash gsi on xiaomi s2 device??

This rom works stably, requires more fullscreen gestures, the existing cesiumOs rom

changelog of 20200315-1139
Rom changelog :
- March security patches
- Revenge Quick Settings
- Dark theme based on time
- Full screen gestures
- Dual SIM ringtones
- MicroG support
- Blur effect on QS
Device changelog :
- Nuked vendor.lineage.power hal
- Follow Android 10 Doze changes on switchbar
- Added backlight dimmer support
- Changed VNDK version
enjoy

Oxygen os for s2/Y2
Plz create an oxygen os rom for our redmi s2/y2
If already created , then plz mention the thread for me...

thanks for the rom! very stable compare to others, all bugs presented in stock lineage are fix based on my experience using this :fingers-crossed:
and may i ask if there is a compatible gcam i can use on this rom? since stock camera is so basic and the quality is kinda low.

jeremeel2015 said:
thanks for the rom! very stable compare to others, all bugs presented in stock lineage are fix based on my experience using this :fingers-crossed:
and may i ask if there is a compatible gcam i can use on this rom? since stock camera is so basic and the quality is kinda low.
Click to expand...
Click to collapse
you can try to use trcam
is pretty stable now on ysl

Working good for daily use, thanks.
GCam 6.1.0.21 working correctly on my device
I am using Orange Fox Recovery, years I uses only TWRP, but now I have OrangeFoy on every devices, is very good.

is it rooted ??

[ROM][10.0] RevengeOS 3.2 | Redmi Note 8 (ginkgo) [UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device!
Ginkgo
What's Working
Wi-Fi
RIL
Mobile data
VoLTE
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint
Sound / vibration
Cast screen
Hardware composer
BUGS:
Tell me!
Download the ROM
- Backup each and every partition from TWRP Recovery(optional)
- Make a full wipe (system, vendor, data, cache, dalvik)
- Flash RevengeOS Package
- Flash gapps
- Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Like my Work?
Buy me a Beer or Coffee
Donate
Device Kernel Source:
https://github.com/azrim/kernel_xiaomi_ginkgo
XDA:DevDB Information
RevengeOS for Xiaomi Redmi Note 8, ROM for the Redmi Note 8
Contributors
Source Code: https://github.com/RevengeOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest MIUI 11
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-04-08
Created 2020-03-01
Last Updated 2020-05-02
XDA:DevDB Information
[ROM][10.0] RevengeOS 3.2 | Redmi Note 8 (ginkgo) [UNOFFICIAL], ROM for the Redmi Note 8
Contributors
MirRooted
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2020-05-02
Last Updated 2020-05-02

CHANGELOGS:
2020/05/02
• Initial build by azrim89
• Using SiLonT kernel for default kernel
• Using Corvus Tree (yeah, don't ask me about HWC **** *graph still high with fixed hwc trees lel)
• Cts fixed
• Selinux Permissive
• audio improvements
• better statusbar padding
• add wireguard kernel module backend
2020/04/08
• Merged April 2020 security patch.
• Moved to Stormbreaker Kernel (thanks @FatalPy).
• Improvements on camera stuff.
• Improvements on display stuff.
• Others minors fixes.
• Synced with latest RevengeOS sources.
2020/03/19
• Bring back WiFi-Display Support.
• Changed Netflix properties (Fix HD).
• Merge tag 'LA.UM.8.1.r1-14500-sm8150.0' in kernel.
• Updated vendor blobs from latest MIUI 20.3.17.
• Removed AOSP Surfaceflinger.
• Synced with latest RevengeOS sources.
2020/03/06
• Updated to March 2020 security patch.
• Updated blobs from latest MIUI 20.3.5
• Enabled LMKD.
• Added a boosting control for the camera-daemon.
• Boosted performance by skipping EAS.
• Improved CPU clock for SM6125 devices.
• Enabled call recording.
• First attempt to fix device wide angle and macro cameras (will be unstable yet).
• Minor Sepolicy updates.
• Synced with latest RevengeOS source.
2020/02/29
• Initial build.
• February security patch.
• Deleted firmware check (good bye to ask for flash firmware first).
• Updated display flags from latest stock.
• Fix status bar padding.
• Enable VoLTE/VoWiFi for many carriers.
• Improved performance.
• Improved battery backup.
• Improved audio output.
• Improved vibration feedback (should be the same as stock).
• Ramdom reboots are fixed.
• And more bugs fixed that I can't remember.

RESERVED

Screenshots?

wasim814 said:
Screenshots?
Click to expand...
Click to collapse
*we don't do that here*

I tried this ROM and when I installed it on TWRP I also installed the GAPPS but when the boot system didn't have the GAPPS installed. I do not know if it is a ROM error but I do not spend with others.

ssamurai said:
*we don't do that here*
Click to expand...
Click to collapse
Since when?

wasim814 said:
Since when?
Click to expand...
Click to collapse
if you check the majority of the posts that talk about ROMs they don't have screenshot I realy don't know why so you have to search in youtube or google to see how they look like

wasim814 said:
Screenshots?
Click to expand...
Click to collapse
Added!

ssamurai said:
if you check the majority of the posts that talk about ROMs they don't have screenshot I realy don't know why so you have to search in youtube or google to see how they look like
Click to expand...
Click to collapse
Lol

Still not updated this rom? ?

Ahmad5544 said:
Still not updated this rom?
Click to expand...
Click to collapse
Just released it few days ago, I don't want to built and release every day, I'm working on it in my free time, also I'll wait to RevengeOS Team to merge the March 2020 security patch

please wait until the release
Ahmad5544 said:
Still not updated this rom?
Click to expand...
Click to collapse

New build of RevengeOS is out!
Check the first post for link and second post for changelog.

DqrKn3Zz said:
New build of RevengeOS is out!
Check the first post for link and second post for changelog.
Click to expand...
Click to collapse
wide doesn't work still but macro does , there is an improvement in camera quality(at least for me there is) however i feel minor stutters when switching between apps and scrolling is not always smooth hope you can take this into account and fix the problems, as always thanks for your work i will be supporting you along the way have a great day :good:

DqrKn3Zz said:
New build of RevengeOS is out!
Check the first post for link and second post for changelog.
Click to expand...
Click to collapse
When we locked then after some time system don't response fingerprint, power button totally freezed..
How to solve this issue. I also enabled always on display
Also slow charging

New build is up!

New build for Redmi Note 8 (Ginkgo) is live on AFH!

Deleted

New build is up!
I will take over this project from now

Develop Bugs

welcome