Related
Earlier today, i was going to install drivers for chainfire3D on my 4.1.2 stock rom on my N7100 international.
After the drivers installed my phone got stuck in the welcome screen (the first one that shows up after starting the phone).
It should be said that I'm pretty new to rooting, flashing, etc. But of course I wouldn't let that, or any number of warning messages during the installation stop me.
So my question is, how do I do (if possible) a full factory reset? I can't get the phone connected via Kies, naturally, and I can't find a firmware file for my region (Norway).
If I could find a firmware file for my region, could I just install it via Odin? If so, where can I find one? Closest I've come is a Greece firmware on samsung-updates.com
h4g3n said:
Earlier today, i was going to install drivers for chainfire3D on my 4.1.2 stock rom on my N7100 international.
After the drivers installed my phone got stuck in the welcome screen (the first one that shows up after starting the phone).
It should be said that I'm pretty new to rooting, flashing, etc. But of course I wouldn't let that, or any number of warning messages during the installation stop me.
So my question is, how do I do (if possible) a full factory reset? I can't get the phone connected via Kies, naturally, and I can't find a firmware file for my region (Norway).
If I could find a firmware file for my region, could I just install it via Odin? If so, where can I find one? Closest I've come is a Greece firmware on samsung-updates.com
Click to expand...
Click to collapse
Here is the link to the latest NEE Rom http://www.hotfile.com/dl/194963553/038c101/N7100XXDMB2_N7100OXXDMB1_NEE.zip.html, flash it with Odin.
Aha! Thanks a lot!
When I click download I just get sent back to the model/region chooser.
Edit: Saw the new download link now. Thanks Again!
h4g3n said:
When I click download I just get sent back to the model/region chooser.
Click to expand...
Click to collapse
Link should be good now, posted the wrong one first (didn`t log in)
Finally got it running again after flashing original rom!
Thank you gee2012 for the info. This was a load off my chest!
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I would also like to know the answer to this question as I have a New Zealand international model but the rom is old. Can I flash the UK version which is the most uptodate. (I have the wifi version).
Thanks
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
colint3 said:
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
Click to expand...
Click to collapse
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
deviant_cryptic said:
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
Click to expand...
Click to collapse
I just downloaded the firmware and used Odin. It didn't wipe the sdcard it just updated the apps. Its worked well ever since.
I have since updated to N5110XXCMK1 using the same method.
Regards
Colin
Thanks. I used the same method to flash 4.2.2 on my device. I am also now on xxcmk1.
Sent from my GT-N5110 using Tapatalk
flash counter
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
miguel0706 said:
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
Click to expand...
Click to collapse
1. My flash counter did not change when I flashed 4.2.2 using Odin.
But it did when I used auto cf root afterwards to root the phone.
2. Nope I haven't tried.
Sent from my GT-N5110 using Tapatalk
More...
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
miguel0706 said:
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
Click to expand...
Click to collapse
have you found the answer?
yeeahnick said:
have you found the answer?
Click to expand...
Click to collapse
Not yet? Now im just waiting for the update to kitkat
i am having this prob too. does my gt-i9300 need to be rooted to flash a stock firmware from different country?
qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
LHNothing said:
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
Click to expand...
Click to collapse
Update: flashing went great, just had to remove the .md5 at the end of the ROM file. Everything seems to be in order.
Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
I used the Pit mapping for the T210. The recovery partition is "mmcblk0p10." I checked the partition info on my T210R using Partition Table by Lakshman. The T210R also has its Recovery partition on "mmcblk0p10," so I expect it to work no problem. And TWRP Odin flashables tend to be compatible with several 7.0 variants.
Click to expand...
Click to collapse
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Greaper88 said:
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Click to expand...
Click to collapse
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
code72 said:
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
Click to expand...
Click to collapse
You can try The Nolekat Rom. It is fest Best Customrom for our Tab.
Sooooo.....
Did it work? Im curious as I got the T2105 tab for my kid and the darn thing is really slow for running Spider- Man Unlimited and some other apps
I want to put Cyanogenmod on it or some other rom with less crap
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
juggalofr33k said:
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
Click to expand...
Click to collapse
Your Bootloop prob is like the same as we have on The other device.
Flash a recovery with The Kitkat KK extension.
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
juggalofr33k said:
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
Click to expand...
Click to collapse
Yes, thats bootloop into recovery.
I prefere CWM or PhilzTouch on all my device.
Right on. Ill give those recoveries a shot. I have used CWM in the past (HTC Aria), but ive been using TWRP since i got the Galaxy Nexus. Ill give them both a try and report back in a few days... My internet connection sucks ass, so it takes hours to download a rom...
code72 said:
Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
Click to expand...
Click to collapse
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
thethakuri said:
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
Click to expand...
Click to collapse
thanks for report thethakuri... i tried to do this too, but for me it doesnt work ... after i installed the 4.4.2, i had a black screen on boot and my tablet dont charge offline... so, i turned to 4.1.2... can you give me any sugesttion?
Update from me: Just upgraded my US SM-T2105 Kids tablet to the UK KK version as well (T210XXBOA3_T210BTUBOA2_Home.tar.md5). Did not work with Odin 3.11 but worked with 3.07 as mentioned above.
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
idefix_sin said:
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
Click to expand...
Click to collapse
Did you ever find a fix for the screen issue? I'm going to give this a shot this weekend my daughter really wants pokemon go on her tablet!
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
idefix_sin said:
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
Click to expand...
Click to collapse
thanks.. by the way did use a recovery? or just flash T210XXBOA3_T210BTUBOA2_Home.tar.md5 with oden?
Hi.
Will update to 4.4.2 would enable the move app to sd card?
Thank you.
any solution to remove kids feature
Root the device and uninstall using root uninstaller.
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Files]
3gb - G930UUEU9CSA3 Google Drive Link
3mb - Odin 3.13.1 Google Drive Link
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
sm g930u v9 bootloader
just wondering if somone could try to make a way for the v9 bootloader now eng boot ?hopefully someone fiqures it out cause im stuck at this point everything fails for me when trying to put on a custom recovery
Nelson456 said:
just wondering if somone could try to make a way for the v9 bootloader now eng boot ?hopefully someone fiqures it out cause im stuck at this point everything fails for me when trying to put on a custom recovery
Click to expand...
Click to collapse
can someone please check this out if their is a downgrade method etc boot recovery for v9 i would appreciate it this is insane i regret when i hit the ota update button
SethGandy said:
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Files]
3gb - G930UUEU9CSA3 Google Drive Link
3mb - Odin 3.13.1 Google Drive Link
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
It has worked for me, thank you very much.
.Details of my Galaxy s7:
-G930P
-Had the February 2019 update, Bootloader v9.
Thank you and luck to others.:laugh:
Can I flash this firmware on a G930a unlocked S7??
Neoguto said:
Can I flash this firmware on a G930a unlocked S7??
Click to expand...
Click to collapse
Should work just fine
Nice work...
Installed this with all tools in thread. Appears to take the image, updates Android to 32% then shows "Erasing". Reboots, says something about rebooting for Sim Updates, does this for a few mins. Then updates Android apps and boom, new stock phone no provider junk on it. Very nice. If I find any issues after the phone setup, I will post update, but if nothing, appears this is now a Stock unlocked phone.
Phone - SM-930P Sprint
Had most recent April Update
No longer on sprint, it's on GoogleFi now, but was unlocked by provider
Is this rootable or did I just take my Marshmellow S7 and destroy it's rootability??? FML why oh why didn't I ask this before doing it...
Hi i have one s7..i want to change to a new rom.whi h rom is better for gaming??(oreo,nougat,marshmalow ,kitkat).ty
Ap958571 said:
Hi i have one s7..i want to change to a new rom.whi h rom is better for gaming??(oreo,nougat,marshmalow ,kitkat).ty
Click to expand...
Click to collapse
I'd say oreo, the newer the better for the sake of actually being able to obtain the apks from the google play store.
I was able to run most games just fine with this rom. :good:
Is this specifically for TMobile users? It's just that i noticed it was TMB-$(version_info).
I guess my question is, does it matter if i use this on a Straight Talk phone, or should i suck it up and spend a day downloading the VMU rom from SAMMOBILE?
More specificity, if it matters. Previously i upgraded from stock Straight Talk rom that came with the phone to VMU, with the SM-G930U firmware. I'm looking to upgrade from Nougat to Oreo now though.
Currently my phone is running VMU-G930UUES4CRG3-20180809155130
SethGandy said:
Should work just fine
Click to expand...
Click to collapse
probably a dumb noob question, but do i have to request a carrier unlock on a 930A before i do this? it is currently carrier locked.
also, after doing whatever is required, will it get OTA unlocked updates?
EDIT: i went ahead and got my s7 unlocked with the ATT code. on trying to flash i got an SHA256 error. after some google i checked the bootloader is "8". is this why? update checker says i'm up to date with Dec 3 2018 security updates...
I'm sorry but is these Snapdragon S7 variants likely to have a Android 9 Rom in the future?
I know it's idiotic btw hope some responses would be left.
SethGandy said:
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
Click to expand...
Click to collapse
This is the first time I've done this and other guides seems to say the opposite. Can someone confirm which I should use if I don't want to do a clean install?
Thanks
Will WiFi calling still work after installing this on a T-Mobile S7? Thank You.
SethGandy said:
[Info]
Make sure to flash with Odin3 v3.13.1.
I'd tried 3.12.x and had no luck. :silly:
Was able to flash my S7 from Verizon to unlocked with this.
Flashing with HOME_CSC will wipe your phone, only do this if you want a clean install.
The non-home CSC should leave all the user files untouched.
I've uploaded this because updato was miserably slow,
just don't want others to jump through as many hoops as I did to get it.
Good luck and thanks for stopping by! :fingers-crossed:
[Contents of firmware zip]
AP_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930UUEU9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930UUEU9CSA3_CP11792902_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYM_G930UOYM9CSA3_CL14970140_QB21779605_REV02_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
Hi, im newbie here
I have g930v G930VVRU4API3 , an its alredy unlocked
I want update it to oreo, can i use this firmware??
Thx
kdkhimura said:
Hi, im newbie here
I have g930v G930VVRU4API3 , an its alredy unlocked
I want update it to oreo, can i use this firmware??
Thx
Click to expand...
Click to collapse
I have the same setup and it worked for me.
whatubeggin said:
I have the same setup and it worked for me.
Click to expand...
Click to collapse
any problem after u update ur phone??
change the samsung s7 logo at startup
Hello, I'm French I do not speak English well. I am looking for someone who can help me change the logo Samsung S7 powered by android at boot time.
Thanks in advance.
Bring aosp 9 plis
Hi all,
I am trying to reflash the unbranded firmware back on my unlocked S20 Ultra with Odin 3.14.4. I was able to flash the T-mo version, and currently my phone is tmo branded, so that worked, but everytime I try to flash back i get the SHA256 error. I do not know if it is because I am trying to flash the wrong firmware or I am doing something else wrong.
Can anyone point me in the right direction?
Thanks everyone.
chris5h said:
Hi all,
I am trying to reflash the unbranded firmware back on my unlocked S20 Ultra with Odin 3.14.4. I was able to flash the T-mo version, and currently my phone is tmo branded, so that worked, but everytime I try to flash back i get the SHA256 error. I do not know if it is because I am trying to flash the wrong firmware or I am doing something else wrong.
Can anyone point me in the right direction?
Thanks everyone.
Click to expand...
Click to collapse
Ensure you don't any other usb devices plugged into the pc.
Thank you for the reply, that is not the issue though. Tested re flashing the Tmo firmware that is currently on it and it flashed ok. Its just tryign to reflash to the original unbranded that fails.
Got the answer. I needed to use the patched version of Odin
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
chris5h said:
Got the answer. I needed to use the patched version of Odin
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
I am considering doing this to get the June security update. Any issues with using the "other" version of Odin? Is your phone still official. Also curious is stock advance messaging still works.
Thanks.
v/r
"D"
d_ganggreen said:
I am considering doing this to get the June security update. Any issues with using the "other" version of Odin? Is your phone still official. Also curious is stock advance messaging still works.
Thanks.
v/r
"D"
Click to expand...
Click to collapse
So I installed and it went back to the stock firmware. No longer do I have the tmobile bootscreen or additional software. What I am concerned with though is I tried an OTA update and I get: Your current software version isn't supported. Visit a service center.
What can I do about this?
d_ganggreen said:
So I installed and it went back to the stock firmware. No longer do I have the tmobile bootscreen or additional software. What I am concerned with though is I tried an OTA update and I get: Your current software version isn't supported. Visit a service center.
What can I do about this?
Click to expand...
Click to collapse
If you used HOME_CSC, that might be your culprit.
I had this issue when I flashed TMO firmware on the unlocked phone. With me being lazy, I didn't want to start from scratch and flashed HOME_CSC to experience this exact issue. As soon as I flashed with full wipe, this issue was solved.
Stank0 said:
If you used HOME_CSC, that might be your culprit.
I had this issue when I flashed TMO firmware on the unlocked phone. With me being lazy, I didn't want to start from scratch and flashed HOME_CSC to experience this exact issue. As soon as I flashed with full wipe, this issue was solved.
Click to expand...
Click to collapse
That was the issue. I factory reset from the phone itself and all is good now. I do NOT have the native advanced messaging though
d_ganggreen said:
That was the issue. I factory reset from the phone itself and all is good now. I do NOT have the native advanced messaging though
Click to expand...
Click to collapse
You mean Samsung messenger?
Stank0 said:
You mean Samsung messenger?
Click to expand...
Click to collapse
Yes, that was the reason I initially put the tmo firmware on. So the samsung messages app had RCS. With the stock, I have lost it.
chris5h said:
Got the answer. I needed to use the patched version of Odin
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
Thanks so much for this information! I was confused as to why it wasn't working. This worked like a charm!
chris5h said:
Hi all,
I am trying to reflash the unbranded firmware back on my unlocked S20 Ultra with Odin 3.14.4. I was able to flash the T-mo version, and currently my phone is tmo branded, so that worked, but everytime I try to flash back i get the SHA256 error. I do not know if it is because I am trying to flash the wrong firmware or I am doing something else wrong.
Can anyone point me in the right direction?
Thanks everyone.
Click to expand...
Click to collapse
Hi Chris
I'm from Pakistan and just flashed one UI 5 firmware of t mobile on my at&t s20 ultra and now my sim is not working by giving me a notification (sim 1 not allowed)
also tried to downgrade to an AT&T one UI 4 version but giving me the same SHA256 error
thanks in advance