Hi! Just installed a custom ROM in my phone and I've been searching for the Camera2 API Enabler but I can't find it in Magisk :<
koen_happy said:
Hi! Just installed a custom ROM in my phone and I've been searching for the Camera2 API Enabler but I can't find it in Magisk :<
Click to expand...
Click to collapse
Download a build prop editor and Google what lines you need to add to enable camera2 API... There doesn't need to be a magisk module for everything
koen_happy said:
Hi! Just installed a custom ROM in my phone and I've been searching for the Camera2 API Enabler but I can't find it in Magisk :<
Click to expand...
Click to collapse
Flash RN5 Camera Patch magisk module, it will enable camera2api
Try Camera All-in-One for MIUI
Related
Hi all,
Can some help me with the best modules that i can apply through magisk on my mi A1.
Camera2 API enabler. ARCore.
Is substratum supported in our device. If yes can I get a link for it.
gunmanrishi said:
Is substratum supported in our device. If yes can I get a link for it.
Click to expand...
Click to collapse
Yes, flash magisk and just download substratum on the play store.
should i install AEX 4.6 ( Noughat ) on my land compared to the Android 8.1 oreo roms which have lots of problems with the front cam portrait mode ?
even if i install AEX 4.6 plz someone tell which is the best version of GCAM should i flash and also link of the magisk module (if required)
P.S. - Noobie Question
ayonavo said:
should i install AEX 4.6 ( Noughat ) on my land compared to the Android 8.1 oreo roms which have lots of problems with the front cam portrait mode ?
even if i install AEX 4.6 plz someone tell which is the best version of GCAM should i flash and also link of the magisk module (if required)
P.S. - Noobie Question
Click to expand...
Click to collapse
7.1.2 will work fine with front and rear potrait and video recording too.
The version which is most stable and i use is "GcamMod5 from arnova v1.6"
And rom i use is lineageos official
Smooth best in performance too!
Rom is your choice but 7.1.2 based roms are best for modded gcam!
Did you flashed any fix to enable HAL 3 Or just directly flashed the GCAM ?
aakashmaji16 said:
7.1.2 will work fine with front and rear potrait and video recording too.
The version which is most stable and i use is "GcamMod5 from arnova v1.6"
And rom i use is lineageos official
Smooth best in performance too!
Rom is your choice but 7.1.2 based roms are best for modded gcam!
Click to expand...
Click to collapse
Did you flashed any fix to enable HAL 3 Or just directly flashed the GCAM ?
ayonavo said:
Did you flashed any fix to enable HAL 3 Or just directly flashed the GCAM ?
Click to expand...
Click to collapse
You need to enable camera2api aka hal3
please tell me how to activate it ? can we do it using magisk module fix ?
aakashmaji16 said:
You need to enable camera2api aka hal3
Click to expand...
Click to collapse
please tell me how to activate it ? can we do it using magisk module fix ?
ayonavo said:
please tell me how to activate it ? can we do it using magisk module fix ?
Click to expand...
Click to collapse
I don't know about magisk module fix
But i do it like this:
1. Install the app from playstore called "build.prop editor"
2. Give root access to the app
3. Tap edit icon. Go to the last line and add without quotes "persist.camera.HAL3.enabled=1"
4. Save it and reboot. Done.
I'm sure that module of magisk must contain this line and add it to the correct file
So what i said is manually enabling it.
Flashing that module will reduce your work!
ayonavo said:
please tell me how to activate it ? can we do it using magisk module fix ?
Click to expand...
Click to collapse
add this code to ur build prop file usin a root file explorer like es and reboot :-
persist.camera.HAL3.enabled=1
or search for camera 2 api magisk module on google and flash it
and for ROM I'd suggest viper os v3.1.1 Android v7.1.2
most stable and customizable rom available for our land in my view ?
Use viper os 7.1.2 aroma best rom .
TBH I think GCAM performance in 7.1.2 better than 8.1
aakashmaji16 said:
7.1.2 will work fine with front and rear potrait and video recording too.
The version which is most stable and i use is "GcamMod5 from arnova v1.6"
And rom i use is lineageos official
Smooth best in performance too!
Rom is your choice but 7.1.2 based roms are best for modded gcam!
Click to expand...
Click to collapse
I'm using the same but getting blurry photos on portrait also changed some settings but getting greenish photos now..
Please share your Gcam settings.
Anyone has tried gcam?
How about camera2api features based on camera2 probe?
arinanda19 said:
Anyone has tried gcam?
How about camera2api features based on camera2 probe?
Click to expand...
Click to collapse
camera2api disabled by default .
we need root to enable it.wait for twrp to release.
there is another method (not sure if work).i will try and report when i get this device.
Gcam works great
I have this question before unlocking the bootloader only for the Gcam, after enabling the camera2api, the other updates continue to work properly ?, is there no risk of Bootloop?
Following a similar issue, is the problem that when enabling the camera2api the front camera stops working? if so, is it possible to deactivate the camera2api by PC with ADB? what would the command be?
Thank you in advance
Benito_Steve said:
I have this question before unlocking the bootloader only for the Gcam, after enabling the camera2api, the other updates continue to work properly ?, is there no risk of Bootloop?
Following a similar issue, is the problem that when enabling the camera2api the front camera stops working? if so, is it possible to deactivate the camera2api by PC with ADB? what would the command be?
Thank you in advance
Click to expand...
Click to collapse
The best thing would be to enable Camera2API via this magisk module. That way you don't have to edit build.prop every time you want to enable or disable Camera2API or applied a system update. You can easily enable/disable Camera2API via magisk manager.
ray.77141 said:
The best thing would be to enable Camera2API via this magisk module. That way you don't have to edit build.prop every time you want to enable or disable Camera2API or applied a system update. You can easily enable/disable Camera2API via magisk manager.
Click to expand...
Click to collapse
I installed Magisk. Confirmed it is rooted.
When I downloaded the module and enabled in magisk. It didn't enable the camera2api. I have no idea why.
MIUI Vsion: 9.5.6.0 (OEIMIFA)
Magisk: v16
What's ROM you runing?
e_mc_square said:
I installed Magisk. Confirmed it is rooted.
When I downloaded the module and enabled in magisk. It didn't enable the camera2api. I have no idea why.
MIUI Vsion: 9.5.6.0 (OEIMIFA)
Magisk: v16
What's ROM you runing?
Click to expand...
Click to collapse
Don't know about MIUI. I am on Resurrection Remix May 26 build with opengapps (nano) and this module is working perfectly for me.
I am using Google Camera Mod by BSG.
Please go through this thread where you can achieve without root
https://forum.xda-developers.com/redmi-note-5-pro/help/how-to-camera2api-google-camera-t3796631
Hi, I've recently installed miui global beta 8.6.14 on my RN5 pro. Will magsik v16 work on this rom?
Yes it perfectly working in miui 10 ROM but if u want magsik hide u have to active fingerprint using terminal emulator
varunkumar007 said:
Yes it perfectly working in miui 10 ROM but if u want magsik hide u have to active fingerprint using terminal emulator
Click to expand...
Click to collapse
Howm can I do?
Follow this thread to pass safety net of magisk it helps to hide magisk root
https://forum.xda-developers.com/redmi-note-5-pro/how-to/passing-safetynet-using-tez-whyred-t3800575
zakariya tomal said:
Hi, I've recently installed miui global beta 8.6.14 on my RN5 pro. Will magsik v16 work on this rom?
Click to expand...
Click to collapse
I am using magisk 16.3, it have not any problem
With dev 8.6.21 can use magisk 16.4
Could you elaborate the requirement of safetynet and magisk hide? I'm a tyro here.
Please elaborate .I m also having same problem
Usually the only reason why magisk SafetyNET fails is that Xposed is installed in SYSTEM or in SYSTEM-LESS mode. If you want to pass SafetyNET, you have to remove xposed from the device itself, bc xposed is a framework modification and the framework is included in the SYSTEM, any modification of it would trigger SafetyNET Fingerprint check. Just like rooting a Samsung and triggering Knox, only safteynet fail can be reversed unlike Knox.
Hello, i tried to install Magisk and xposed, but i have bootloop ...
How to fix it, it is possible to install them on miui 10 last stable ?
Link for magisk, xposed framework ?
varunkumar007 said:
Yes it perfectly working in miui 10 ROM but if u want magsik hide u have to active fingerprint using terminal emulator
Click to expand...
Click to collapse
Can you please send an active fingerprint.