5457#*240# takes me to the WCDMA Service Menu ..i can set the wcdma channel to user and it remains But when i try setting the LTE channel to band 3 it dosent remain its always back to LTE band 5 pref....i tried the user that too didnt work...how do i get it to choose band 3 only...
Teardrop45 said:
5457#*240# takes me to the WCDMA Service Menu ..i can set the wcdma channel to user and it remains But when i try setting the LTE channel to band 3 it dosent remain its always back to LTE band 5 pref....i tried the user that too didnt work...how do i get it to choose band 3 only...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2303331
Build.prop enable Network Mode in mobile networks
Sent from my LG-E980 using Tapatalk 2
anyone own a Three branded G4? i assume your still on 5.1
can you let me know the software version of your handset?
i just got a used one, im on three network and wanted to make sure its on latest, im in V10h-234-20
Build: LMY47D
is is software a three branded one?
Yes it is
thanks mate
do you know how i can test band 20 (800Mhz) ? i believe it will only be selected if no 1800Mhz 4G/3G is available
i want to test VoLTE indoor
bigup7 said:
thanks mate
do you know how i can test band 20 (800Mhz) ? i believe it will only be selected if no 1800Mhz 4G/3G is available
i want to test VoLTE indoor
Click to expand...
Click to collapse
Dialler > 277634#*# opens the hidden menu
Field Test > Modem Settings > LTE BAND SELECTION > Tap Band 20.
If you're in the range of the 800 MHz the phone switch to it and will ONLY use it (until restart) or until you toggle WCDMA / LTE in the normal settings.
If you're getting No signal, go to manual network selection (do not change to WCDMA/LTE, leave it on LTE) and search for networks. If you don't see 3 RAT 4G, well, you don't have 800 Mhz.
michalpro said:
Dialler > 277634#*# opens the hidden menu
Field Test > Modem Settings > LTE BAND SELECTION > Tap Band 20.
If you're in the range of the 800 MHz the phone switch to it and will ONLY use it (until restart) or until you toggle WCDMA / LTE in the normal settings.
If you're getting No signal, go to manual network selection (do not change to WCDMA/LTE, leave it on LTE) and search for networks. If you don't see 3 RAT 4G, well, you don't have 800 Mhz.
Click to expand...
Click to collapse
Hi
Do you have a link for the 10H firmware?
radii said:
Hi
Do you have a link for the 10H firmware?
Click to expand...
Click to collapse
No, I can see it was released 10 days ago but no link to kdz yet. Not sure if worth updating or waiting for MM
michalpro said:
No, I can see it was released 10 days ago but no link to kdz yet. Not sure if worth updating or waiting for MM
Click to expand...
Click to collapse
i have a modified G4 (using your guide including the very last update changes), the OTA function can't find an update....likely MM not too far away.
radii said:
i have a modified G4 (using your guide including the very last update changes), the OTA function can't find an update....likely MM not too far away.
Click to expand...
Click to collapse
OTA usually doesn't work on modified / rooted ROMS, so it's expected behaviour
ps. just checking. I can select band 20 and 4g works. if i select band 3 (1800) it keeps finding signal and unable to lock despite there being 1800 signal. does selecting band 3 work for you? is there a way of setting 4g only - so it works 800+1800 only ? (i know no volte on 1800)
michalpro said:
Dialler > 277634#*# opens the hidden menu
Field Test > Modem Settings > LTE BAND SELECTION > Tap Band 20.
If you're in the range of the 800 MHz the phone switch to it and will ONLY use it (until restart) or until you toggle WCDMA / LTE in the normal settings.
If you're getting No signal, go to manual network selection (do not change to WCDMA/LTE, leave it on LTE) and search for networks. If you don't see 3 RAT 4G, well, you don't have 800 Mhz.
Click to expand...
Click to collapse
hi, i have seen your previous guide on how to flash a G4 to work with 3's VoLTE
Is this still the case if i want to use VoLTE on a none 3 purchased handset ? guessing simply flashing the 3 stock ROM is not going to work?
Hi guys i wanna know that if there is any way possible to lock op3 on band 40 only i.e 2300mhz band and prevent it from switching on to low speed 850mhz band. I am on stock oxygen os 3.2.4.any help will be appreciated. Thanks
How to know - to which band our phone is connected
JumboMan said:
How to know - to which band our phone is connected
Click to expand...
Click to collapse
There is an app called netvelocity by jio. It tells the info regarding the band and other info as well
Dial *#*#4636#*#* go into phone information >> press the 3 dots menu >> choose radio bands ..
Choose band 40 from the list ....
I am using Jio as well .. It does change the band to 2300 MHz and I get about 40Mbps Instead of abysmal 2 Mbps on 850 MHz !
You need to do that every time you boot your phone .
anirudhnyg said:
Dial *#*#4636#*#* go into phone information >> press the 3 dots menu >> choose radio bands ..
Choose band 40 from the list ....
I am using Jio as well .. It does change the band to 2300 MHz and I get about 40Mbps Instead of abysmal 2 Mbps on 850 MHz !
You need to do that every time you boot your phone .
Click to expand...
Click to collapse
Setting the band 40 in this option will result in setting the same band for both sims ...
i m using normal 2g/3g sim in sim1 slot and jio sim in sim2 slot..
after selecting band 40 in that settings will result in no network for sim1(normal reliance sim)..
so , how to rectify that..??
hijagdeep said:
Setting the band 40 in this option will result in setting the same band for both sims ...
i m using normal 2g/3g sim in sim1 slot and jio sim in sim2 slot..
after selecting band 40 in that settings will result in no network for sim1(normal reliance sim)..
so , how to rectify that..??
Click to expand...
Click to collapse
Try putting Jio in Sim slot 1
I have an Airtel sim in slot 2 I still have signal In Airtel even after choosing band 40. .
---------- Post added at 07:15 PM ---------- Previous post was at 07:15 PM ----------
PS : Probably because Airtel has 2300 MHz network too ..
anirudhnyg said:
Try putting Jio in Sim slot 1
I have an Airtel sim in slot 2 I still have signal In Airtel even after choosing band 40. .
---------- Post added at 07:15 PM ---------- Previous post was at 07:15 PM ----------
PS : Probably because Airtel has 2300 MHz network too ..
Click to expand...
Click to collapse
it worked thanxxx ..
that option will only change band for sim1 ...
but how to get back to default band without restarting phone...??
Post Edited
after some times , signal for normal sim2 gone , have to restart my mobile to get network in normal sim
You can't really choose your own band.
We have some parameters in the Network, that decide the priority of which frequency band you connect to.
Generally, where Signal, quality and load allow, we let you connect to higher frequency.
anirudhnyg said:
Dial *#*#4636#*#* go into phone information >> press the 3 dots menu >> choose radio bands ..
Choose band 40 from the list ....
I am using Jio as well .. It does change the band to 2300 MHz and I get about 40Mbps Instead of abysmal 2 Mbps on 850 MHz !
You need to do that every time you boot your phone .
Click to expand...
Click to collapse
I did that that but its not setting my jio sim's frequency on 2300mhz. Its still on 850mhz. On which rom are u? I am on oxygen os 3.2.4 and this trick isn't working for me sadly:crying:
Are you able to use VoLte on Jio?
ankushgautam said:
I did that that but its not setting my jio sim's frequency on 2300mhz. Its still on 850mhz. On which rom are u? I am on oxygen os 3.2.4 and this trick isn't working for me sadly:crying:
Click to expand...
Click to collapse
I am on Sultan CM 13 .
Yes VOLTE works in Jio and OP3
anirudhnyg said:
Dial *#*#4636#*#* go into phone information >> press the 3 dots menu >> choose radio bands ..
Choose band 40 from the list ....
I am using Jio as well .. It does change the band to 2300 MHz and I get about 40Mbps Instead of abysmal 2 Mbps on 850 MHz !
You need to do that every time you boot your phone .
Click to expand...
Click to collapse
What app do you have to check the band connected. I also have jio but i do not get such high speeds.
Funk Wizard said:
What app do you have to check the band connected. I also have jio but i do not get such high speeds.
Click to expand...
Click to collapse
There is an app named netvelocity.. Just google jiostore and download it from there.. But problem for me is thay the bands are not getting locked for me from *#*#4636#*#*. The connection does get reset after selecting band 40 but netvelocity app shows 850mhz band and speed remains same as well. Only when i go outdoors then my op3 gets connected to band 40 nd i get full 4g speed of around 30-40 Mbps
ankushgautam said:
There is an app named netvelocity.. Just google jiostore and download it from there.. But problem for me is thay the bands are not getting locked for me from *#*#4636#*#*. The connection does get reset after selecting band 40 but netvelocity app shows 850mhz band and speed remains same as well. Only when i go outdoors then my op3 gets connected to band 40 nd i get full 4g speed of around 30-40 Mbps
Click to expand...
Click to collapse
Yeah that's right it tends to fluctuate that's the reason of low speeds.
ankushgautam said:
There is an app named netvelocity.. Just google jiostore and download it from there.. But problem for me is thay the bands are not getting locked for me from *#*#4636#*#*. The connection does get reset after selecting band 40 but netvelocity app shows 850mhz band and speed remains same as well. Only when i go outdoors then my op3 gets connected to band 40 nd i get full 4g speed of around 30-40 Mbps
Click to expand...
Click to collapse
In my one plus three, it doesn't show any band information
See the screenshot attached
Sent from my One Plus Three using xda premium
hijagdeep said:
In my one plus three, it doesn't show any band information
See the screenshot attached
Sent from my One Plus Three using xda premium
Click to expand...
Click to collapse
You need to enable it by clicking on More (top right corner)
If you don't have the More option then download the Netvelocity enterprise apk
Selecting band 40 from *#*#4636#*#* didn't work for me
Stuck on 850 Mhz.
ushpiy said:
You need to enable it by clicking on More (top right corner)
If you don't have the More option then download the Netvelocity enterprise apk
Selecting band 40 from *#*#4636#*#* didn't work for me
Stuck on 850 Mhz.
Click to expand...
Click to collapse
Same here.. Can't go on to band 40 even after selecting it and band 850 is giving almost 2g speeds... Everytym i have to go outside my house to download any big file.. Someone needs to solve this for us... I don't want to hate my oneplus 3 for this
selecting band 40 won't make you stop connecting to band 5,
and sadly there's no way we can lock our LTE connection to certain band yet, neither to set the preference
i understand your frustation, since my provider is also using band 5 & 40 for the LTE. If you are in rural/suburban area, it will connect to 850Mhz most of the time, since lower freq has a better penetration and coverage range.
2300Mhz mostly used in city & building, since it can give better throughput
otonieru said:
selecting band 40 won't make you stop connecting to band 5,
and sadly there's no way we can lock our LTE connection to certain band yet, neither to set the preference
i understand your frustation, since my provider is also using band 5 & 40 for the LTE. If you are in rural/suburban area, it will connect to 850Mhz most of the time, since lower freq has a better penetration and coverage range.
2300Mhz mostly used in city & building, since it can give better throughput
Click to expand...
Click to collapse
That's exactly what's happening and i am getting almost 2g speeds on 850mhz...really frustrating... Anyways i hope soon there is a solution to this problem... I just wish i could remove 850mhz band from my phone... Grrrrr
ushpiy said:
You need to enable it by clicking on More (top right corner)
If you don't have the More option then download the Netvelocity enterprise apk
Selecting band 40 from *#*#4636#*#* didn't work for me
Stuck on 850 Mhz.
Click to expand...
Click to collapse
My app have more option...and I have even enabled advanced mode , but didnt get band information....
Do u able to access band info in your OnePlus3..?
Is there any APP/way to choose 2.4Ghz WiFi band instead of 5 GHz?
I have a Samsung A50 with stock Android 9.
I wonder the same. help please