Samsung Galaxy Buds and Developer Options > Bluetooth Audio Codec > AAC Issues - Moto Z2 Force Questions & Answers

Hey everyone,
So, I purchase the Samsung Galaxy Buds. I like these little things.
Overall, the sound is good, bass is there (not great but good for wireless), and the portability is awesome. I've had stellar battery life. My only problem... some video and audio latency in some games and videos.
I've done some research and found that the Bluetooth codec has a lot to do with latency and such. I've enabled Developer Options, scrolled to Bluetooth Audio Codec, and selected another option... but the option doesn't stick. No matter what I pick, SBC continues to stay selected. Even though the bud support SBC, AAC, and Scalable. So, how can I get the AAC codec to be selected?
Also, I don't suppose there is a way to get the Scalable codec installed. I hear it does really well with these buds.
Thanks!

Scalable is a codec engineered by Samsung, so my Galaxy can use SBC/AAC/SC with the Buds. As for your question, you have to consider the legality behind porting Scalable. Assuming Samsung's policy prohibits redistribution and modification, no one will touch it. There's likely a reason behind the lack of a Scalable module (magisk) or flashable (afaik).
Z2 can use AAC on LOS, no clue about stock fw. One other thing, did you update the firmware for the Galaxy Buds?

Related

[APP] noozy 1.1.14 classic (4.+)

noozy 1.1.14 classic​
An audiophile grade music transport designed to enhance the listening experience for the on-the-go audiophile. The “noozy” features a premium audio player that lets you experience the best possible sound quality from your music library.
Introducing the advanced sound engineering from “Noozxoide Laboratories“. The noozy exclusive special effect VSP “EIZO-rewire M Series” delivers software-layered 32bit floating-point processing power bringing the superior and aggressive sound that ever made. The new VSP processing and mixing each FX separately, you can fully take control of your content effects.
“ESX acoustic engine” for headphone deliver fake-Crossfeed effect, automatic basic toning and acoustic restoration, added premium deeper bass enhancer “MaxxBass II UltraLinear” giving more speaker sizes and psycho-acoustic bass effect up to 1.8 octave that can merely punch a hole on the floor. It’s an earth-shattering bass enhancer FX taken from “EIZO-rebirth TX” Cinema Edition and special tuned for music content.
“Crystalyzer” and “Soundfield Attack” give you more detailed and deliver ultra-higher resolution possible. Which makes crystal-clear and re-mastering the world full of symphony of sounds. The “NuVocal UltraLinear” re-shape the vocal/phases sound clearer, acting acoustic restoration.
The state-of-the-art AVLS system normalizing from song to song without even needed to pre-analyze the song volume-level, also act as a smart overload protection system.
In this “Classic” edition, DFX Switcher allows you to use either Internal or External audio filter network, so that you can experience two different kinds of VSPs. If you are tired listening to the aggressive sound for a very long hours, there are several VSP series available in the market which you can use them as an External DFX network for your new sound modeling again. So you get nothing less than exceptional sound performance, every time. Now doesn’t that sound great?
Click to expand...
Click to collapse
Yesterday I See In The Google Play, Support For DSP Manager, ViPER FX And ViPER XHiFi, Working Very Well On My SIII Mini With PAC Rom (By Maclaw Studio)
PLEASE USE PROFESSIONAL HEADPHONE OR PRACTICAL SPEAKERS TO EXPERIENCE IT. RECOMMENDED TO USE HEADPHONE AMPLIFIER
AGGRESSIVE SOUND CAN DAMAGE TO YOUR EARS WHEN LISTENING TO A VERY LONG HOUR IN EXTREME SETTINGS. STOP USING IT IF YOU ARE FEELING UNCOMFORTABLE
READ THE GRAPHICAL USER MANUAL PROVIDED. THIS PRODUCT HAS LIMITED HARDWARE COMPATIBILITY
(tech: this app uses emulation technologies to communicate with the compatible libraries as a medium (alsa driver) and interprets directly to the DAC chip and doesn't require external libs, it simply took over it, brought to you by "Noozxoide SoundXEMU" sound-cross-emulation)
Supported Formats: MP3, OGG, (AAC, M4A), FLAC-16
DAC-2-EMU (M): S-Master HX (100%), BurrBrown (100%), Sabre (100%), Wolfson (100%)
I Can't Attach The APK, I Think ´Cause I'm Newbie ... So Here's The Playstore Link. Sorry For That.
play.google.com/store/apps/details?id=com.dogsbark.noozy&hl=en
Ne ayak
GT-I8190 cihazımdan Tapatalk kullanılarak gönderildi

Mi Max Sound Problems

How are people dealing with the audio problems on the Mi Max? It is affecting the Global MIUI 7&8 and the China MIUI 8 ROM. Xiaomi has done nothing despite many complaining on the MIUI forums for months. Even the latest ROM has the same problems.
The output through the headphone jack is half the volume it should be. You can easily listen to YouTube at full volume and it's not even loud. Also the sound quality is appalling with quiet vocals and heavy bass even without using the system EQ (which crashes anyway in MIUI 7). There is also a noticeable hissing/static though headphones for a few seconds before and after a system sound plays, but listening to music doesn't have the same problem.
Considering its a standard Qualcomm DAC used in many phones its terrible what Xiaomi has done to mess up the output. My Mediatek powered phone from 2012 sounds so superior and with the Mi Max being a media consumption aimed phone it's a real poor effort.
I believe the phone is taking a low internal DAC output (caused by a bug) and amplifying it hence the distorted sound and low max volume. It's the only thing I'm extremely disappointed with and wondered how others are handling the issue?
By ditching MIUI...!?
Does the Mi Max not have these issues running CM etc?
I'm sure many are currently using MIUI and I won't be ditching it at least until the years warranty is up, also want to see what MIUI 9 is like based on Nougat.
F27 said:
Does the Mi Max not have these issues running CM etc?
I'm sure many are currently using MIUI and I won't be ditching it at least until the years warranty is up, also want to see what MIUI 9 is like based on Nougat.
Click to expand...
Click to collapse
Except some low volume issues which are fixed now haven't heard of much complains...
nijel8 said:
Except some low volume issues which are fixed now haven't heard of much complains...
Click to expand...
Click to collapse
https://www.google.co.uk/search?q=m...i+max+sound+problems+site:en.miui.com&start=0
F27 said:
How are people dealing with the audio problems on the Mi Max? It is affecting the Global MIUI 7&8 and the China MIUI 8 ROM. Xiaomi has done nothing despite many complaining on the MIUI forums for months. Even the latest ROM has the same problems.
The output through the headphone jack is half the volume it should be. You can easily listen to YouTube at full volume and it's not even loud. Also the sound quality is appalling with quiet vocals and heavy bass even without using the system EQ (which crashes anyway in MIUI 7). There is also a noticeable hissing/static though headphones for a few seconds before and after a system sound plays, but listening to music doesn't have the same problem.
Considering its a standard Qualcomm DAC used in many phones its terrible what Xiaomi has done to mess up the output. My Mediatek powered phone from 2012 sounds so superior and with the Mi Max being a media consumption aimed phone it's a real poor effort.
I believe the phone is taking a low internal DAC output (caused by a bug) and amplifying it hence the distorted sound and low max volume. It's the only thing I'm extremely disappointed with and wondered how others are handling the issue?
Click to expand...
Click to collapse
I can confirm the low headphone volume bug exists for some media/music player apps on the miui 8 global rom. However, there's an easy workaround. Open Google play music app and play an audio file in that app. Increase the headphone volume from that app beyond the 'Warning: high volume can damage hearing' volume level. Leave the headphone volume at the highest setting. Close Google play music app. The next time you play audio in your preferred media player (other than Google play music), it should already be fixed. If you don't have Google play music, you can download it from Google Play store.
F27 said:
https://www.google.co.uk/search?q=m...i+max+sound+problems+site:en.miui.com&start=0
Click to expand...
Click to collapse
That wasn't necessary... I am well aware of all things about Mi Max from day one.
And you were asking about CM so...
I thought my new earphones were faulty when I used them in my Mi Max. I was going to give them away but then I read about sound problems on Mi Max. Both my xiaomi phones have poor sound quality, mi4 always had poor quiet sound.
The low volume has been fixed for me on g8
There's some cracking but that's sorted by clean cache in the play music app there's also a equaliser in the app settings
This is a workaround for get high volume during listening to music by using IEM/Headphone. Only work with poweramp v3 alpha build 703/704
(Please Google it for APK. It's free in Poweramp forum)
Install poweramp v3 alpha, go to setting > resampler.
Select resampler type > SoX
Resampler cutoff frequency ratio > 97% ~ 99%
Dither > Improved e-weighted noise shaping (Poweramp indicate it slow but actually it fast enough)
Tap back button and select Hi-Res Output and then turn on Wired headset/aux (it will upsampled lossy format thus higher volume and audio quality improved a little bit. Another thing is make sure the 24-bit Snapdragon DAC is activated during listening session).
WARNING: Lower the volume at 20% or lower before activating Hi-Res output during playback. Trust me you'll thanks me later xD
If you can hear distorted sound at high volume, go to replay gain (RG), set preamp for songs without RG info to -7dB. (Just to make sure the sound is not clipping).
The Mi Max audio quality is pretty good even the DAC is just an integrated DAC.
In the screenshot is DSD128 playback. Working but it was downsampled. As for 24bit/96kHz source, it will upsampled to 192kHz.
Thank you for the replies. I have tried upping to volume in Google Play Music and it did increase the volume in other apps by around 20% so it's a start and thank you for the tip but it's still not really near the quality and loudness it should be for a stock Qualcomm 652 DAC. I will give the V3 Poweramp beta trick a try. I am currently using the Poweramp Pro to listen to music and the Mi Max sounds poor.
Basically Xiaomi need to go through how MIUI is handling audio and overhaul it imo, and hopefully version 9 won't need any of these work arounds because I've never had trouble on other budget phones... or I'm off to another ROM!
F27 said:
Thank you for the replies. I have tried upping to volume in Google Play Music and it did increase the volume in other apps by around 20% so it's a start and thank you for the tip but it's still not really near the quality and loudness it should be for a stock Qualcomm 652 DAC. I will give the V3 Poweramp beta trick a try. I am currently using the Poweramp Pro to listen to music and the Mi Max sounds poor.
Basically Xiaomi need to go through how MIUI is handling audio and overhaul it imo, and hopefully version 9 won't need any of these work arounds because I've never had trouble on other budget phones... or I'm off to another ROM!
Click to expand...
Click to collapse
If you want more loudness still, louder than what the stock MIUI 8 can give you, I suggest you install music players with a 'pre-amp'. Neutron is one of my favorites among 'audiophile' grade music players (though I like BSPlayer more due to its multimedia capabilities). You can download the trial version of 'Neutron' at Google playstore (or purchase the full version if you are satisfied with the player.) Here are screenshots of Neutron music player where the pre-amp was adjusted (above zero) so as to increase the Mi Max's maximum attainable headphone volume (without buying an external portable headphone amp). Please note that too high a pre-amp setting can cause audio clipping which results to bad sound quality.
As to sound quality, yes the Mi Max headphone sound quality is really poor out of the box (MIUI 8). I have an Audio technica ATH-M50s/LE headphones which I used to listen to FLAC music on my previous Huawei Mate 7 phone. The sound quality was just ethereal. It's like listening to live musicians. I missed the headphone sound quality on my Mate 7 [DTS enabled] using the Audio technica as my headphones and BSPlayer as my preferred player (highlights the Audio Technica's strengths). Anyway, when I changed to the Mi Max, I used the same Audio Technica headphones only to be disappointed. I found out the Mi Max can't quite match the Mate 7's music reproduction [headphone DTS enabled] using the same music player (BSPlayer) or any music player for that matter. Fortunately, the Mi Max comes with headphone settings and a built in equalizer. Did a little experimentation and came up with the following settings that managed to somehow 'resemble' what my previous Mate 7 phone was able to deliver with regard to sound quality. Please note your mileage may vary depending on the quality of the headphones you use and your preferred media or music player:
1. Set Mi sound enhancer to 'ON'. Choose 'Mi headphones'.
2. Set the equalizer as follows:
These settings should improve the Mi Max's sound quality tremendously... Well, at least from my experience --- using the same Audio technica headphones and BSPlayer music player as audio player. I've saved the custom equalizer settings above as 'Mate7' because it reminds me of the sound quality of my previous Mate 7 phone. It's not a perfect match, but at least it comes close. Please note you really need good quality over-the-ear headphones if you want to overcome the Mi Max's 'poor headphone audio' shortcomings. Alternate headphones that I have thoroughly listened to and would also highly recommend are the B&W P7 and Sennheiser Momentums. I would have bought the B&W P7 had I not auditioned the Audio Technica side-by-side it and the Sennheiser Momentums. If you are serious about audio but can't give up the Mi Max for another phone with better audio components, then the recommendations above are about as good as the Mi Max can get.
don brian said:
If you want more loudness still, louder than what the stock MIUI 8 can give you, I suggest you install music players with a 'pre-amp'. Neutron is one of my favorites among 'audiophile' grade music players (though I like BSPlayer more due to its multimedia capabilities). You can download the trial version of 'Neutron' at Google playstore (or purchase the full version if you are satisfied with the player.) Here are screenshots of Neutron music player where the pre-amp was adjusted (above zero) so as to increase the Mi Max's maximum attainable headphone volume (without buying an external portable headphone amp). Please note that too high a pre-amp setting can cause audio clipping which results to bad sound quality.
As to sound quality, yes the Mi Max headphone sound quality is really poor out of the box (MIUI 8). I have an Audio technica ATH-M50s/LE headphones which I used to listen to FLAC music on my previous Huawei Mate 7 phone. The sound quality was just ethereal. It's like listening to live musicians. I missed the headphone sound quality on my Mate 7 [DTS enabled] using the Audio technica as my headphones and BSPlayer as my preferred player (highlights the Audio Technica's strengths). Anyway, when I changed to the Mi Max, I used the same Audio Technica headphones only to be disappointed. I found out the Mi Max can't quite match the Mate 7's music reproduction [headphone DTS enabled] using the same music player (BSPlayer) or any music player for that matter. Fortunately, the Mi Max comes with headphone settings and a built in equalizer. Did a little experimentation and came up with the following settings that managed to somehow 'resemble' what my previous Mate 7 phone was able to deliver with regard to sound quality. Please note your mileage may vary depending on the quality of the headphones you use and your preferred media or music player:
1. Set Mi sound enhancer to 'ON'. Choose 'Mi headphones'.
2. Set the equalizer as follows:
These settings should improve the Mi Max's sound quality tremendously... Well, at least from my experience --- using the same Audio technica headphones and BSPlayer music player as audio player. I've saved the custom equalizer settings above as 'Mate7' because it reminds me of the sound quality of my previous Mate 7 phone. It's not a perfect match, but at least it comes close. Please note you really need good quality over-the-ear headphones if you want to overcome the Mi Max's 'poor headphone audio' shortcomings. Alternate headphones that I have thoroughly listened to and would also highly recommend are the B&W P7 and Sennheiser Momentums. I would have bought the B&W P7 had I not auditioned the Audio Technica side-by-side it and the Sennheiser Momentums. If you are serious about audio but can't give up the Mi Max for another phone with better audio components, then the recommendations above are about as good as the Mi Max can get.
Click to expand...
Click to collapse
FYI, the audio quality pretty impressive with IEM (Audio Technica ATH-IM50 and Trinity Audio Engineering Delta). You feel the sound is not quite loud enough because of internal amp suck. Mi Max can't handle high impedance headphone like yours (ATH-M50X). To overcome your problem, you have to pair your Mi Max with portable amp such as fiio e11k.
btw, didnt you noticed your source is clipping too much across low freq??
Actually the 'Neutron' screenshots did not show any headphones attached. The music was played on Mi Max's loudspeakers which can't reproduce low frequency so you can't hear the clipped low frequency sounds. The recording is actually only piano, vocals and cymbals. The low frequency is from instrument feedback (low frequency hum). On my ATH-M50s/LE headphones, that volume level would have been half as much since 100% is already too loud, eliminating the low frequency clipping. I don't need an external amp for my headphones. They're loud enough for me except for some Chesky recordings.
At the end of the day we shouldn't need to do any of these fixes and tweaks to make the sound from the Mi Max reasonable, Xiaomi should fix it but it seems they have very poor customer service when it comes to feedback and bugs. This Qualcomm DAC chipset is in many phones yet they don't have sound quality and loudness issues. I don't expect perfection but the Mi Max out of the box sounds worse than by budget Mediatek powered phone from 4 years ago!
i modded the mixer_paths files to make the sound louder. My roms all include this already. You need to make sure in your build.prop that fluence is enabled by making sure there is a line that says ro.qc.sdk.audio.fluencetype=fluence and make sure the two lines persist.audio.fluence.voicecall and persist.audio.fluence.speaker are set to true. Then flash this in twrp or replace your three mixer paths files in system/etc with the ones in the zip file.
https://drive.google.com/file/d/0B5I_q70mNuR4c1pxODNpTk12Y2M/view?usp=sharing
AeroMiku said:
FYI, the audio quality pretty impressive with IEM (Audio Technica ATH-IM50 and Trinity Audio Engineering Delta). You feel the sound is not quite loud enough because of internal amp suck. Mi Max can't handle high impedance headphone like yours (ATH-M50X). To overcome your problem, you have to pair your Mi Max with portable amp such as fiio e11k.
btw, didnt you noticed your source is clipping too much across low freq??
Click to expand...
Click to collapse
Try out Foobar2000 (available on the Play Store, free & open source) instead of Neutron & you can skip the entire default sound processing with usage of the Open SL sound output & you will find a built in DSP section mostly sufficient. I am against modifying sound picture to much & as much as I sow in GSM Arena review the output sound picture is almost perfect & thick behind iPhone 6s (I plan to buy Max now). Rest is mostly influenced by quality of sound source & used headphones. For more well use dedicated external DAC & Amp.
---------- Post added at 11:43 AM ---------- Previous post was at 11:37 AM ----------
ajsmsg78 said:
i modded the mixer_paths files to make the sound louder. My roms all include this already. You need to make sure in your build.prop that fluence is enabled by making sure there is a line that says ro.qc.sdk.audio.fluencetype=fluence and make sure the two lines persist.audio.fluence.voicecall and persist.audio.fluence.speaker are set to true. Then flash this in twrp or replace your three mixer paths files in system/etc with the ones in the zip file.
https://drive.google.com/file/d/0B5I_q70mNuR4c1pxODNpTk12Y2M/view?usp=sharing
Click to expand...
Click to collapse
Would actually rather increase (in small steps) output volume
In <!-- Play Scenario --> section for headphones & speaker if I whose you.
Don't exaggerate with it!
Best regards.
I did the opposite and reduced headphone volume to get rid of the hissing. I had the same problem on the Note 3 Pro, on MIUI 8 and CM13/CM14, so it's down to how the Qualcomm mixers are configured. By reducing gain and turning off companders you're dropping the noise floor. The drawback is that headphone volume is low, so this hack only works well with low impedance IEMs like Xiaomi Pistons.
1. Get rooted, open up all mixer_path_*.xml files in /system/etc.
2. Change HPHL Volume and HPHR Volume to a low value like 2.
3. Change any Comp* Switch values to 0.
4. Change RX HPH Mode to CLS_H_HIFI
5. Reboot and enjoy.
My own solution - Use VLC. Fixes the volume problem well - after you set the Audio Output to ES
skerry2006aj said:
My own solution - Use VLC. Fixes the volume problem well - after you set the Audio Output to ES
Click to expand...
Click to collapse
Use Foobar2000 instead, VLC is bad when it comes to music.

Is there a way to use the high quality DAC for the speaker by default?

There was a post where someone suggested using the AIMP player, I haven't been able to find it again (to give the proper credit), but it started because someone noticed how sound played different depending on what app played the sound or music.
It seems AIMP uses the Snapdragon 24-bit DSP (or DAC?) , which delivers a high quality output, I was actually surprised when I heard the difference.
My question is where or what could be changed so the default audio output uses the high quality DSP? So videos games and even ringtones and notifications (seriously it sounds much better) use it as well.
There is a great mod that activates the headspeaker when playing media, and even allows using both speakers with a stereo configuration, so perhaps using the DSP by default is also doable.
it was me who suggested the AIMP player in a previous post. i would however like to inform you that audio output using the OpenSL ES API instead of the default AudioTrack output will give you the raw audio of the DAC. Media Players which have this option will definitely sound much better. To my knowledge i have seen only VLC media player to support this feature (you have to change the output in setting unlike in AIMP). Custom sound mods are software level implementations which will just give you an amplified sound irrespective of quality. PowerAMP and MX has this option too but doesnt seem to work.
For better audio quality through speakers the default AudioTrack API works better.
asrone96 said:
it was me who suggested the AIMP player in a previous post. i would however like to inform you that audio output using the OpenSL ES API instead of the default AudioTrack output will give you the raw audio of the DAC. Media Players which have this option will definitely sound much better. To my knowledge i have seen only VLC media player to support this feature (you have to change the output in setting unlike in AIMP). Custom sound mods are software level implementations which will just give you an amplified sound irrespective of quality. PowerAMP and MX has this option too but doesnt seem to work.
For better audio quality through speakers the default AudioTrack API works better.
Click to expand...
Click to collapse
Oh it was you, awesome recommendation indeed! Now normal audio output sounds muffled to me, the DAC audio quality is certainly much better.
Thank you, will look into it!
Avan7 said:
Oh it was you, awesome recommendation indeed! Now normal audio output sounds muffled to me, the DAC audio quality is certainly much better.
Thank you, will look into it!
Click to expand...
Click to collapse
Sure man, ZUK has done something which modifies the audio quality before getting into our ears. I am sure its the audio driver. If someone can change that we should get a better audio quality.
Ummm I'm so unlucky, I've my JACK bricked :silly:. And I'm finding some way to route audio through USB using "USB-C to 3.5mm converter", same as Le2. I could not find a decent type-C headphone. I use Bluetooth reciever, and it's not even close to 3.5 mm jack. Any clue ? I'VE bought Poweramp, and it's useless now.
For those who use PowerAmp, update to latest build, i.e. 704 from official forum. Zuk Z2 does support HiRes Audio Output. Latest Play Store beta channel only have 703 build, which doesn't support HiRes Audio output in N.
kima09 said:
For those who use PowerAmp, update to latest build, i.e. 704 from official forum. Zuk Z2 does support HiRes Audio Output. Latest Play Store beta channel only have 703 build, which doesn't support HiRes Audio output in N.
Click to expand...
Click to collapse
When I enable hi-res output, it fails. I don't think it is working.
kima09 said:
For those who use PowerAmp, update to latest build, i.e. 704 from official forum. Zuk Z2 does support HiRes Audio Output. Latest Play Store beta channel only have 703 build, which doesn't support HiRes Audio output in N.
Click to expand...
Click to collapse
Can't find build 704. Will you please post a link?
asrone96 said:
it was me who suggested the AIMP player in a previous post. i would however like to inform you that audio output using the OpenSL ES API instead of the default AudioTrack output will give you the raw audio of the DAC. Media Players which have this option will definitely sound much better. To my knowledge i have seen only VLC media player to support this feature (you have to change the output in setting unlike in AIMP). Custom sound mods are software level implementations which will just give you an amplified sound irrespective of quality. PowerAMP and MX has this option too but doesnt seem to work.
For better audio quality through speakers the default AudioTrack API works better.
Click to expand...
Click to collapse
Latest version of MX Player (1.9.5 & 1.9.7) support change of audio output method. Although no big difference with movie files, maybe difference can be felt when listening to flac audio.
Incrovantilist said:
Latest version of MX Player (1.9.5 & 1.9.7) support change of audio output method. Although no big difference with movie files, maybe difference can be felt when listening to flac audio.
Click to expand...
Click to collapse
MX player doent work. it works with vlc and aimp only
asrone96 said:
MX player doent work. it works with vlc and aimp only
Click to expand...
Click to collapse
Maybe true, coz I found no difference even in movies with uncompressed 6 channel & 5.1 audio. But option exists, so we have hope for it to be working in future releases.
Update for Poweramp 704_universal - Doesn't work properly yet. No observable difference in quality even with flac. I've been using the 704 version for quite a while now, also on 3 different phones. None of the three have supported high res properly. On my OPX it usually caused the app to crash. Maybe with the long awaited update to v3 might make it work properly.
Incrovantilist said:
Maybe true, coz I found no difference even in movies with uncompressed 6 channel & 5.1 audio. But option exists, so we have hope for it to be working in future releases.
Update for Poweramp 704_universal - Doesn't work properly yet. No observable difference in quality even with flac. I've been using the 704 version for quite a while now, also on 3 different phones. None of the three have supported high res properly. On my OPX it usually caused the app to crash. Maybe with the long awaited update to v3 might make it work properly.
Click to expand...
Click to collapse
yeah...those options make no difference ...only AIMP works for now...in the beta release of AIMP there is an option to change audio output too
d3vyarth said:
Can't find build 704. Will you please post a link?
Click to expand...
Click to collapse
If, like me, your preferred player is Poweramp, you can make it sound like AIMP's OpenSL output. besides enabling OpenSL as output method, open this file /data/data/com.maxmpz.audioplayer/shared_prefs/com.maxmpz.audioplayer_preferences.xml, find the string osl_headset_float and set its value to true and save it.Then force close PowerAMP and open again, the audio quality will match that of AIMP. But anyways, if you are really a audiophile, using VLC (opensl output ofc) gives the best possible quality, just saying
samsungrockz said:
If, like me, your preferred player is Poweramp, you can make it sound like AIMP's OpenSL output. besides enabling OpenSL as output method, open this file /data/data/com.maxmpz.audioplayer/shared_prefs/com.maxmpz.audioplayer_preferences.xml, find the string osl_headset_float and set its value to true and save it.Then force close PowerAMP and open again, the audio quality will match that of AIMP. But anyways, if you are really a audiophile, using VLC (opensl output ofc) gives the best possible quality, just saying
Click to expand...
Click to collapse
Yes I use Poweramp, thanks for the workaround
Audio breaks when i use open sl audio output. Do you ever face this problem or my mobile is defective.
@abhishek said:
Audio breaks when i use open sl audio output. Do you ever face this problem or my mobile is defective.
Click to expand...
Click to collapse
force stop vlc and open again... It works...
d3vyarth said:
Ummm I'm so unlucky, I've my JACK bricked :silly:. And I'm finding some way to route audio through USB using "USB-C to 3.5mm converter", same as Le2. I could not find a decent type-C headphone. I use Bluetooth reciever, and it's not even close to 3.5 mm jack. Any clue ? I'VE bought Poweramp, and it's useless now.
Click to expand...
Click to collapse
I have the converter as well as ZUK Z2 (with my wife), I'll check if audio through USB-C works and if the hardware output works or not (provided my wife doesn't get cranky over my testing )

Hi-Res output Snapdragon 625

Tested on the lousy zenfone 3 zoom (stock 3.5mm audio sucks inspite of DAC chip because of the poor engine optimization) and it worked like a champ but i believe other devices with SN 625 may benefit from it and they are A LOT, (use 709 build ONLY) other builds won't work as good, i tested them all.
Please do make a feedback on which other device this worked.
Snapdragon 845 devices (e.g. Sony XZ2) – improved Hi-Res Output detection
Sony XZ/XZ1 – improved Hi-Res Output detection
Lenovo X3 – reenabled 24bits
OnePlus (1st edition) – disabled DVC for Hi-Res output due to forced speaker playback
added new per-output option – No Duck – for cases when notification causes issues. Activated by default for Hi-Res output for some Snapdragon 625 devices (Asus Zenfone 3)
HTCs @ 7.0 – improved Hi-Res Output stability
Nexus 6P – fixed notification coloring
Enjoy Hi-Res music all.
Direct download, use poweramp unlocker to activate it.
sam.fisher190 said:
Tested on the lousy zenfone 3 zoom (stock 3.5mm audio sucks inspite of DAC chip because of the poor engine optimization) and it worked like a champ but i believe other devices with SN 625 may benefit from it and they are A LOT, (use 709 build ONLY) other builds won't work as good, i tested them all.
Please do make a feedback on which other device this worked.
Snapdragon 845 devices (e.g. Sony XZ2) – improved Hi-Res Output detection
Sony XZ/XZ1 – improved Hi-Res Output detection
Lenovo X3 – reenabled 24bits
OnePlus (1st edition) – disabled DVC for Hi-Res output due to forced speaker playback
added new per-output option – No Duck – for cases when notification causes issues. Activated by default for Hi-Res output for some Snapdragon 625 devices (Asus Zenfone 3)
HTCs @ 7.0 – improved Hi-Res Output stability
Nexus 6P – fixed notification coloring
Enjoy Hi-Res music all.
link for pros:
<Mod edit>
APK for noobs i'll upload it when the server wakes up
Click to expand...
Click to collapse
Can't see any difference on the audio on Poweramp with this option set for active. The audio quality really sucks on this device.
Mrkblo said:
Can't see any difference on the audio on Poweramp with this option set for active. The audio quality really sucks on this device.
Click to expand...
Click to collapse
Did you toggle the 'Wired headset/AUX" ? and was your test with headphones or via the loud speaker? and what your headphones are?
This release 709 worked for me gloriously! the only problem that it's not free and needs some work that you can find on youtube or i would post a fellow up about the odds of activating it but i just needed a conformation that it at least made a difference by utilizing the DAC chip on board!!
sam.fisher190 said:
Did you toggle the 'Wired headset/AUX" ? and was your test with headphones or via the loud speaker? and what your headphones are?
This release 709 worked for me gloriously! the only problem that it's not free and needs some work that you can find on youtube or i would post a fellow up about the odds of activating it but i just needed a conformation that it at least made a difference by utilizing the DAC chip on board!!
Click to expand...
Click to collapse
I've downloaded the apk you uploaded and followed the screenshots. It made zero difference to the sound quality. Poweramp DVC is great on other devices, but on my zenfone it sucks, the audio is distorted, the only way to tolerate the audio quality is by disabling it. Best player I could find so far for my zenfone is Phonograph.
Mrkblo said:
I've downloaded the apk you uploaded and followed the screenshots. It made zero difference to the sound quality. Poweramp DVC is great on other devices, but on my zenfone it sucks, the audio is distorted, the only way to tolerate the audio quality is by disabling it. Best player I could find so far for my zenfone is Phonograph.
Click to expand...
Click to collapse
The zenfone 3 zoom have an amazing sound quality and believe me the bass is insane via a good headphones, you just need to find a solution to make use of it's potentials, if you want to go throw troubleshooting provide some more information like the exact model and what software build you are currently running... you are right about the distortion i was very upset with the sound quality at the beginning but poweramp made the DAC work properly.
sam.fisher190 said:
The zenfone 3 zoom have an amazing sound quality and believe me the bass is insane via a good headphones, you just need to find a solution to make use of it's potentials, if you want to go throw troubleshooting provide some more information like the exact model and what software build you are currently running... you are right about the distortion i was very upset with the sound quality at the beginning but poweramp made the DAC work properly.
Click to expand...
Click to collapse
I wouldn't say that the sound quality on the zenfone 3 zoom is amazing. This DTS audio thing is terrible and makes sound awful. I've installed an even older version of poweramp and tried your solution, and it made a difference with my JBL T210 (not the best one around, surely). However, using Poweramp with DVC on an old Galaxy S6 that I have laying around is still miles better. Sound quality is my only complaint about this phone, that's why I was hoping for a custom rom for this thing.
Mrkblo said:
I wouldn't say that the sound quality on the zenfone 3 zoom is amazing. This DTS audio thing is terrible and makes sound awful. I've installed an even older version of poweramp and tried your solution, and it made a difference with my JBL T210 (not the best one around, surely). However, using Poweramp with DVC on an old Galaxy S6 that I have laying around is still miles better. Sound quality is my only complaint about this phone, that's why I was hoping for a custom rom for this thing.
Click to expand...
Click to collapse
Yeah you're absolutely right that DTS is a marketing thing and it sucks, you just keep trying on that poweramp 709 build only and try downloading it from APKPURE or somewhere else because the one that i provided was patched with lucky patcher and i hoped it would work with a non-rooted device to skip the activation process but apparently that is not the case, after i reflashed the phone and got rid of the root access i had to install poweramp unlocker and i have to reinstall the the main app every 2 days because without the root i can't seem to be able to activate it, keep digging, i know what a good DAC sounds like, it's not an HTC native level but it's miles ahead of the stock drivers and even better than viper4android module on magisk.
sam.fisher190 said:
Yeah you're absolutely right that DTS is a marketing thing and it sucks, you just keep trying on that poweramp 709 build only and try downloading it from APKPURE or somewhere else because the one that i provided was patched with lucky patcher and i hoped it would work with a non-rooted device to skip the activation process but apparently that is not the case, after i reflashed the phone and got rid of the root access i had to install poweramp unlocker and i have to reinstall the the main app every 2 days because without the root i can't seem to be able to activate it, keep digging, i know what a good DAC sounds like, it's not an HTC native level but it's miles ahead of the stock drivers and even better than viper4android module on magisk.
Click to expand...
Click to collapse
No worries about that. I've purchased the app years ago. The only thing now is that I can't allow it to update. Thanks for the hint, the sound is clearly better now.
sam.fisher190 said:
...because the one that i provided was patched with lucky patcher and i hoped it would work with a non-rooted device to skip the activation process but apparently that is not the case,...
Click to expand...
Click to collapse
THREAD CLOSED! Download file removed!
XDA Forum Rules (excerpt):
...
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
...
Click to expand...
Click to collapse

EDM listeners, are you satisfied with the sound quality?

I can’t quite get my Sony WH-XB900N wireless bluetooth headphones to sound right with the Mi 10T. They sounded great with my last phone, the Nougat-restricted HTC U11 Eyes, which topped-out at AptX (and with all my other tech).
With the older phone, adjusting the equalizer in any third-party app affects sound output accordingly. With the Mi 10T, adjusting third-party equalizers has absolutely zero effect on sound. In fact, when I attempt to engage the equalizer in Blackplayer, it displays a pop-up saying something along the lines of “Can’t use this until you disable built-in equalizer”. The built-in equalizer has its own quirks (which I’ll get to), and there’s no way to turn it off AFAIK. Disabling/uninstalling Mi Sound and Audio Effects (via ADB) doesn’t restore third-party equalizer functionality.
With the exception of Classical, the built-in equalizer’s presets are all rubbish IMO. Far too muddy or boomy in terms of bass. Adjusting it manually doesn’t really make things better either. I’m allowed only boomy bass or no bass, and waspy treble or no treble.
Toggling on “Adjust sound to earphones” and selecting Colour Edition or Youth Edition certainly helps (the rest only degrade sound quality further) – but neither is perfect. Colour Edition produces tight, clean bass but waspy treble. Youth edition produces crystal clear treble but boomy bass (arrgh!).
After much experimentation, the best combination I found is as follows.
AptX HD > LDAC (listening to 44.1/320 MP3 tracks).
Youth Edition.
Starting with the default preset, adjust the right-most three sliders to about a third of what they are in the Classical preset.
Adjust the left-most two sliders down just a smidge.
But I’m still not satisfied. I was looking forward to a superior musical experience using the Mi 10T, seeing as how its codec support tops-out at LDAC – but I’m left disappointed.
What else haven’t I tried?
For me, its okay. AAC support is welcoming

Categories

Resources