Hi
how can i change csc code without root the device?
KingMKH said:
Hi
how can i change csc code without root the device?
Click to expand...
Click to collapse
You have to choose the correct ROM first. So if your phone is SM-A505F you need that ROM. Not recommended to use other ROMs like SM-A505 FN, G etc.
Once you have the correct ROM (must be newer than your current) use Odin 3.13 or newer to flash your phone . before flashing do back up and then remove all accounts!!! Then remove your SIM and memocard and do hard reset. Connect to Odin in download mode and flash. Wait till its completely finished and boot up your phone. 1st boot can take up to 10 minutes, once you see the Start screen insert the SIM card from desired region and let the phone restart again.
My phone for some reason picked up CAC product code (Uzbekistan). Flashed latest ROM inserted my Vodafone SIM and after restart my phone was on BTU (UK unbranded).
is flashing different CSC ROM will trip Knox
I my case this method for FN version did not worked any different way to do it?
Adooni said:
is flashing different CSC ROM will trip Knox
Click to expand...
Click to collapse
No it wont trip knox as long as you are flashing official samsung firmware.
OK I investigate a bit today
looks like I was able to change CSC from ROM to FTM (Freanch Orange) using brand Orange from Poland (OPV) - all was done with JUN patch the same patch level files
I would like to change from ROM to XEO (Poland unbranded) and for this I did not found any way to work
Adooni said:
OK I investigate a bit today
looks like I was able to change CSC from ROM to FTM (Freanch Orange) using brand Orange from Poland (OPV) - all was done with JUN patch the same patch level files
I would like to change from ROM to XEO (Poland unbranded) and for this I did not found any way to work
Click to expand...
Click to collapse
I think that it's somehow let you change the CSC only one time... I recalling that I was able to do it on my A50 and A70 but only one time...
in my case it is more like I can change to branded CSC like orange or T-Mobile ( did this few time) but it not give me Poland as a country
I cannot change to unbranded CSC like XEO - it always show ROM as active CSC (softwanre CSC it is showing XEO) but for example news I have from Romania
Adooni said:
in my case it is more like I can change to branded CSC like orange or T-Mobile ( did this few time) but it not give me Poland as a country
I cannot change to unbranded CSC like XEO - it always show ROM as active CSC (softwanre CSC it is showing XEO) but for example news I have from Romania
Click to expand...
Click to collapse
typically it will remain as whatever sim you have in the phone.. there are tricks u can do.. id search some more as theres many csc related threads.. also make sure that csc u want is actually included on the device already since if it doesnt exist then well you cant use it until u get the right csc..
Rexton270 said:
I think that it's somehow let you change the CSC only one time... I recalling that I was able to do it on my A50 and A70 but only one time...
Click to expand...
Click to collapse
Please how did you change your A70 CSC
Adooni said:
OK I investigate a bit today
looks like I was able to change CSC from ROM to FTM (Freanch Orange) using brand Orange from Poland (OPV) - all was done with JUN patch the same patch level files
I would like to change from ROM to XEO (Poland unbranded) and for this I did not found any way to work
Click to expand...
Click to collapse
Please I want to change my A705FN/DS CSC, please teach me how to do it.
---------- Post added at 01:51 PM ---------- Previous post was at 01:42 PM ----------
Adooni said:
OK I investigate a bit today
looks like I was able to change CSC from ROM to FTM (Freanch Orange) using brand Orange from Poland (OPV) - all was done with JUN patch the same patch level files
I would like to change from ROM to XEO (Poland unbranded) and for this I did not found any way to work
Click to expand...
Click to collapse
I want to change my A705FN/DS CSC, TEACH how to go about it.
jonakwofie13 said:
Please how did you change your A70 CSC
Click to expand...
Click to collapse
You didn't say what region you want. In my case I was after UK (BTU) or Germany (DBT).
Do hard reset (sim and memory card remove). Turn on phone without sim and wait until it says No sim inserted. Insert the sim from region or country you want to have on your phone.
Make sure you have multi CSC ROM. In my case it was ok. Changed from CAC to BTU.
Rexton270 said:
You didn't say what region you want. In my case I was after UK (BTU) or Germany (DBT).
Do hard reset (sim and memory card remove). Turn on phone without sim and wait until it says No sim inserted. Insert the sim from region or country you want to have on your phone.
Make sure you have multi CSC ROM. In my case it was ok. Changed from CAC to BTU.
Click to expand...
Click to collapse
I'm in Africa specifically Ghana. But I don't have LTE only in my network mode so wanted to switch to a different CSC.
jonakwofie13 said:
I'm in Africa specifically Ghana. But I don't have LTE only in my network mode so wanted to switch to a different CSC.
Click to expand...
Click to collapse
There's no LTE/4G only mode. So if this is what you want no need for flashing different ROM.
jonakwofie13 said:
I'm in Africa specifically Ghana. But I don't have LTE only in my network mode so wanted to switch to a different CSC.
Click to expand...
Click to collapse
This from my settings. International model/no branding
Rexton270 said:
This from my settings. International model/no branding
Click to expand...
Click to collapse
Thanks bro
I did not successed in changing CSC from ROM to XEO - I tryied all ways I found in web
Adooni said:
I did not successed in changing CSC from ROM to XEO - I tryied all ways I found in web
Click to expand...
Click to collapse
You need multi CSC ROM. First time boot up without sim and memory card. When boot finished will tell you insert sim. I think Samsung set up phones to allow ONLY one change and only first time...
Rexton270 said:
You need multi CSC ROM. First time boot up without sim and memory card. When boot finished will tell you insert sim. I think Samsung set up phones to allow ONLY one change and only first time...
Click to expand...
Click to collapse
I have same problem. Which multirom rom should I use for my version and where to find it? Im located in Serbia.
Thanks
Related
Hello
i don't know if this question was asked before i tried to search but nothing
i came from xperia xz and flashing was just as easy as downloading the FTF and flashing in flash mod
i bought my S9 that was stuck at 1 Dec 2018 software and no new updates are available (even with smart switch) to download so my best solution is to update it manually using ODIN
i used to have a galaxy gear watch and s5 and flashing was also simple but i came across a thread that said something about CSC Version and i am sacred that i may brick the phone while trying to update it
can someone point me in the right directions ?
my CSC : G960FOXM2CRLI
Service provider SW ver.
SAOMC_SM-G960F_OXM_KSA_PP_0002
KSA/EGY, EGY/XSG
baseband version
G960FXXU2CRLI
build number
PPR1.180610.011.G960FXXU2CRLI
and i live in egypt but the phone was sold is KSA if that's matters
any help please ?
thanks in advance
iSpammer said:
Hello
i don't know if this question was asked before i tried to search but nothing
i came from xperia xz and flashing was just as easy as downloading the FTF and flashing in flash mod
i bought my S9 that was stuck at 1 Dec 2018 software and no new updates are available (even with smart switch) to download so my best solution is to update it manually using ODIN
i used to have a galaxy gear watch and s5 and flashing was also simple but i came across a thread that said something about CSC Version and i am sacred that i may brick the phone while trying to update it
can someone point me in the right directions ?
my CSC : G960FOXM2CRLI
Service provider SW ver.
SAOMC_SM-G960F_OXM_KSA_PP_0002
KSA/EGY, EGY/XSG
baseband version
G960FXXU2CRLI
build number
PPR1.180610.011.G960FXXU2CRLI
and i live in egypt but the phone was sold is KSA if that's matters
any help please ?
thanks in advance
Click to expand...
Click to collapse
If there are no updated KSA firmwares for your S9, flash any CSC for the G960F, Germany (DBT ) has the latest June update
If you have KSA sim card need to flash KSA firmware with only Home CSC also and if you have EGY sim card and will come OTA downloads
KSA/KSA,KSA/XSG
PUMA007 said:
If you have KSA sim card need to flash KSA firmware with only Home CSC also and if you have EGY sim card and will come OTA downloads
KSA/KSA,KSA/XSG
Click to expand...
Click to collapse
Does not matter what SIM is in the phone
I have O2U SIM (United Kingdom) and DBT Firmware (Germany)
*Detection* said:
Does not matter what SIM is in the phone
I have O2U SIM (United Kingdom) and DBT Firmware (Germany)
Click to expand...
Click to collapse
And me i have XSG phone from dubai and i have SEE firmware and sim card and OTA update com ewry mounth
PUMA007 said:
And me i have XSG phone from dubai and i have SEE firmware and sim card and OTA update com ewry mounth
Click to expand...
Click to collapse
Well yes you need CSCs to match for OTA, but it is not necessary for normal usage, once my region releases the latest update I will flash back for OTA
so it's normal to flaash any firmware even if the CSC doesn't match? only the phone model number right? flashing on ODIN like thr normal way kust like the s5? nothing else need to be done ? like enabling/disabling stuff on developper options ? OEM unlock? sorry for my noobies questions
iSpammer said:
so it's normal to flaash any firmware even if the CSC doesn't match? only the phone model number right? flashing on ODIN like thr normal way kust like the s5? nothing else need to be done ? like enabling/disabling stuff on developper options ? OEM unlock? sorry for my noobies questions
Click to expand...
Click to collapse
Normal if your own region CSC has not updated their firmware yes, but you will not receive OTA updates until the CSCs match and will have to flash manually each update
There is a big thread about it so I'm not going to go into it in detail here, quick search should find what you need
Nothing else needed, boot to download mode and flash with Odin 3.13.1
Thank you
iSpammer said:
Thank you
Click to expand...
Click to collapse
Have a read through here, should help explain a few things
https://forum.xda-developers.com/galaxy-s9/help/changing-csc-s9-t3884699
Hi,
c
You have to use the same model to flash in Odin. 976B is not 976N.
You can flash the KOO firmware for 976N which is the unbranded version (I bought it myself at a Samsung shop in Seoul).
I tried to flash with 976B and got errors. I flashed with KOO 976N but srill i have brand of KT when i start the phone also some settings of KT.
No idea why KT still stays after flashing
minipac13 said:
I tried to flash with 976B and got errors. I flashed with KOO 976N but srill i have brand of KT when i start the phone also some settings of KT.
No idea why KT still stays after flashing
Click to expand...
Click to collapse
Right, because 976B is not the phone you have. You can't use a different model firmware.
Sounds like you need to change the CSC to KOO after boot up.
I used CSC for KOO byr still no lick
Let me know which CSC maybe i am doing something wrong
minipac13 said:
I used CSC for KOO byr still no lick
Let me know which CSC maybe i am doing something wrong
Click to expand...
Click to collapse
You said you flashed KOO firmware. That is not the same thing as switching CSC after booting up.
There is a phone menu to change the CSC. You need to do this, which will change the CSC setting on the EFS partition which is what you need to do.
Woow thank you for that. Now this is new and i didn't know it. Can you help me and let me know where to change CSC.
Thanks
*#272*IMEI# not working... i don't want to root also
minipac13 said:
*#272*IMEI# not working... i don't want to root also
Click to expand...
Click to collapse
you can try this:
https://forum.xda-developers.com/ga...de-how-to-change-s9-s9-csc-model-csc-t3870836
Kalm_Traveler said:
you can try this:
https://forum.xda-developers.com/ga...de-how-to-change-s9-s9-csc-model-csc-t3870836
Click to expand...
Click to collapse
no use and help from link since this was for combination firmware.
did you change ur CSC ? which method?
minipac13 said:
no use and help from link since this was for combination firmware.
did you change ur CSC ? which method?
Click to expand...
Click to collapse
The SM-N976N has 4 CSC options built-in. KOO is the unbranded Samsung code. There are 3 for the 3 major carriers in Korea: SK Telecom, kt Olleh, and LG U+
No I did not change my CSC because I bought my phone in a Samsung store in Seoul.
I have KT one , when i switch one says 5G and under screen KT.
also in setting. I am trying to find the way to change the CSC from KTC to KOO
Active KTC
Edit
Ohhh no way that bad
For me only Samsung pay ,5G, start up the phone, phone can't recognize my number rather than that everything else is perfect.
I am trying to find way to change CSC to KOO, hopefully will work
minipac13 said:
Ohhh no way that bad
For me only Samsung pay ,5G, start up the phone, phone can't recognize my number rather than that everything else is perfect.
I am trying to find way to change CSC to KOO, hopefully will work
Click to expand...
Click to collapse
Do you mean your N10+ doesn't connect to the 5G network even if it's present and working in your zone?
Yes i don't see 5G at all even covered in my country. Always LTE+
Weird.. where are you from?
Our model is 5G, I suppose SM-976B only is suitable for 5G networks over asian countries, hope someone could tell me I'm wrong...
vysus said:
Weird.. where are you from?
Our model is 5G, I suppose SM-976B only is suitable for 5G networks over asian countries, hope someone could tell me I'm wrong...
Click to expand...
Click to collapse
I don't know the specs of the B variant, but my N variant 5g worked in Korea just fine. Haven't been able to test it in the USA yet because T-Mobile doesn't have any 5g towers in my state yet.
In my country, UAE according to bands only N976N working since the are on same 5G band.
N976B isn't working with UAE network (5G). I bought and sold N976B.
Also now N976N is not working coz of carrier, KT from Korea.
I've tried to debrand my phone by flashing open market firmware (XEO, Poland). I downloaded the newest version of Odin, flashed it but now my CSC under settings says OPV/OPV, OPV/EUX/OPV. OPV is my carrier's CSC, I'm wondering what that EUX is. I've looked it up on Google and it seems like I'm not alone, seems like Samsung changed something and older methods no longer work. The question is - will I still receive updates released for my carrier or I'm screwed for good? Phone INFO app says my active CSC is OPV. I'm running S20+ 5G (G986B) Exynos variant.
Same problem here, I've flashed it with XEO POLAND G986BXXU1ATBM firmware using Odin3 v3.14.1_3B_PatcheD, few minutes later it showed "PASS" and nothing changed. Same branded firmware after reboot..
It seems, that many more 'branded' CSCs are now part of Multi-CSC. For me, this is DTM (T-Mobile DE). It osed to not be part of multi-CSC but it is now part of OXM.
This means, that you can not force it anymore, as you already ARE having the exact same firmware with the 'branded' CSC. Just checked, OPV is in deed part of OXM now.
In the Ultra Section is a thread showing the CSCs belonging to OXM: https://forum.xda-developers.com/ga...galaxy-s20-ultra-g988b-firmwares-5g-t4060443/
I have not yet found out / gotten an answer from anybody how to change CSC. Samkey also is not supporting the S20 series ATM - dont know, if this will change.
Monnq said:
I've tried to debrand my phone by flashing open market firmware (XEO, Poland). I downloaded the newest version of Odin, flashed it but now my CSC under settings says OPV/OPV, OPV/EUX/OPV. OPV is my carrier's CSC, I'm wondering what that EUX is. I've looked it up on Google and it seems like I'm not alone, seems like Samsung changed something and older methods no longer work. The question is - will I still receive updates released for my carrier or I'm screwed for good? Phone INFO app says my active CSC is OPV. I'm running S20+ 5G (G986B) Exynos variant.
Click to expand...
Click to collapse
What I have worked out is that when you flash a multi-CSC firmware file you end running the CSC one letter earlier in the alphabet out of the. Available multi-CSC list
E.g. I had a VOD branded S105G and flashed BTU firmware, and ended up with TEL CSC
I also tried flashing BTU on an H3G branded A70 and ended up with EVF CSC
The original branded product CSC also never changes
---------- Post added at 11:32 AM ---------- Previous post was at 11:30 AM ----------
Andrino said:
Same problem here, I've flashed it with XEO POLAND G986BXXU1ATBM firmware using Odin3 v3.14.1_3B_PatcheD, few minutes later it showed "PASS" and nothing changed. Same branded firmware after reboot..
Click to expand...
Click to collapse
Enable Developer mode and set OEM Unlock to ON before trying to change CSC via ODIN Flash
This should not be necessary? Doesn't that trip Knox, despite original Samsung Firmware?
corwin_amber said:
It seems, that many more 'branded' CSCs are now part of Multi-CSC. For me, this is DTM (T-Mobile DE). It osed to not be part of multi-CSC but it is now part of OXM.
This means, that you can not force it anymore, as you already ARE having the exact same firmware with the 'branded' CSC. Just checked, OPV is in deed part of OXM now.
In the Ultra Section is a thread showing the CSCs belonging to OXM: https://forum.xda-developers.com/ga...galaxy-s20-ultra-g988b-firmwares-5g-t4060443/
I have not yet found out / gotten an answer from anybody how to change CSC. Samkey also is not supporting the S20 series ATM - dont know, if this will change.
Click to expand...
Click to collapse
Since now it's part of Multi CSC, does that mean I will receive updates faster? I can see other polish carrier's CSC are listed as single so I assume they are kind of separate firmware, am I right?
Honestly I do not know, if the respective CSC will be getting OTAs at the same time.
However, you can always flash manually with HOME_CSC, that is true.
corwin_amber said:
This should not be necessary? Doesn't that trip Knox, despite original Samsung Firmware?
Click to expand...
Click to collapse
Enable OEM unlock does not trip Knox. As long as you flash official Samsung firmware files in Odin Knox is never tripped
My own personal experience on S10 and above is you cannot flash a different CSC with OEM Unlock disabled
(Flash completes successfully but CSC doesn't change)
When changing from one e.g. branded csc to multi csc with the S10+, this worked fine without enabling oem unlock. Well, anyway. Flashing OXM multi CSC over OXM multi CSC will not change anything, right?
corwin_amber said:
When changing from one e.g. branded csc to multi csc with the S10+, this worked fine without enabling oem unlock. Well, anyway. Flashing OXM multi CSC over OXM multi CSC will not change anything, right?
Click to expand...
Click to collapse
I found that you have to be on a single CSC before flash to multi-CSC and also you don't always end up on the CSC you expected
e.g. Flash BTU on a VOD product and you end up on TEL CSC (one letter in alphabet below VOD) and not on BTU
did everyone succesed DEBRAND ?
i v got s20 ultra OPV(orange) and need XEO (official)
tak, poprzez samkey
Yes, with samkey
@0kti if you have any credits remain let me know please ( I will buy it )
I found link to our android com pl forum , thanks
Nope. Buy on ebay. It's cheap. 3 credits.
Tapatalk - SM-G986B
one credit please, somebody will share ?
raphaelx69 said:
one credit please, somebody will share ?
Click to expand...
Click to collapse
really lmao.. its literally a few bucks... chimera tool works great also but is a mpre expensive subscription but dont gotta kee0 buyin credits
Hi All,
I have read that to debrand a Samsung Galaxy S20 phone (mine is SM-G981B) you can't just do a straight flash with Odin using debranded firmware and that you instead need to first change the CSC using SamKey. However my issue is that the CSC for the carrier my phone is currently on (United Kingdom EE) seems to be the same as debranded firmware (United Kingdom BTU). You can see here: sammobile.com/samsung/galaxy-s20/firmware/SM-G981B/BTU they both have the same CSC (G981BOXM1ATCT).
I also came across this guide: samsungsfour.com/tutorials/how-to-install-stock-rom-on-galaxy-s20-s20-plus-s20-ultra-s20-5g.html for debranding, however without any other sources to back it up, I am a bit reluctant to try it out in case it causes any issues.
Any help with this would be greatly appreciated thanks.
Rave7 said:
Hi All,
I have read that to debrand a Samsung Galaxy S20 phone (mine is SM-G981B) you can't just do a straight flash with Odin using debranded firmware and that you instead need to first change the CSC using SamKey. However my issue is that the CSC for the carrier my phone is currently on (United Kingdom EE) seems to be the same as debranded firmware (United Kingdom BTU). You can see here: sammobile.com/samsung/galaxy-s20/firmware/SM-G981B/BTU they both have the same CSC (G981BOXM1ATCT).
I also came across this guide: samsungsfour.com/tutorials/how-to-install-stock-rom-on-galaxy-s20-s20-plus-s20-ultra-s20-5g.html for debranding, however without any other sources to back it up, I am a bit reluctant to try it out in case it causes any issues.
Any help with this would be greatly appreciated thanks.
Click to expand...
Click to collapse
Mate, all you need to do is change the csc to BTU in order to debrand. EVR and BTU csc are part of the same multi csc, however change your csc to BTU if you do not want any carrier bloatware or boot image etc.
So the only way to debrand is to use samkey? There is not a free/not payed alternative?
west2cool said:
Mate, all you need to do is change the csc to BTU in order to debrand. EVR and BTU csc are part of the same multi csc, however change your csc to BTU if you do not want any carrier bloatware or boot image etc.
Click to expand...
Click to collapse
Thank you very much, I'll give that a go.
denzel09 said:
So the only way to debrand is to use samkey? There is not a free/not payed alternative?
Click to expand...
Click to collapse
Denzel09, you can buy a single SamKey credit on eBay for £2.25 just to let you know. Search for SamKey, sort by cheapest and set "Item Location" to Worldwide.
Hello community!
I recently bought a Samsung Galaxy S20+ (SM-G985F) which is carrier branded and sim locked. I am looking to remove the carrier branding by using a unbranded firmware. I am trying to find an unbranded firmware that will not affect the functionalities of the phone ( VoLTE, VoWiFi etc..) . Would this be done by finding a firmware with same PDA but different CSC?
Current Branded Firmware:
Version G985FXXU3ATG4 / G985FOWA3ATG4 / G985FXXU3ATG4
Product Code: PGU
Would this firmware work?
Product code LUX
PDA G985FXXU3ATG4
CSC G985FOXM3ATG9
Thanks in advance for your help!
@servenaya
if you have a sim card of Guatemala and you want to keep VoLTE, VoWiFi etc.. for this country
install Version PDA G985FXXU3ATG4-CSC G985FOXM3ATG9
and change your CSC to GTO ( with préconfiguration for TIGO_CGU , PCW_PA and Claro_DR )
LUX have only préconfiguration for Luxemburg ( Proximus , POST , Tango , Telenet , Orange B and LUX )
regards
yakapa40 said:
@servenaya
if you have a sim card of Guatemala and you want to keep VoLTE, VoWiFi etc.. for this country
install Version PDA G985FXXU3ATG4-CSC G985FOXM3ATG9
and change your CSC to GTO ( with préconfiguration for TIGO_CGU , PCW_PA and Claro_DR )
LUX have only préconfiguration for Luxemburg ( Proximus , POST , Tango , Telenet , Orange B and LUX )
regards
Click to expand...
Click to collapse
@yakapa40, thank you! This information is very helpful. I do have a Claro Guatemalan sim and even though the carrier does not support VoLTE, or VoWifi, I would like to keep this features in case they implement them in the future. I did find a firmware with the recommended PDA and CSC (Country South East Europe, Product code: SEE, PDA: G985FXXU3ATG4, CSS: G985FOXM3ATG9). Would this firmware work? From what understand, I would have to first flash this firmware, then change de CSC with Samkey to GTO and lastly, factory restore the phone. Is this correct?
Also, would you recommend using Samkey to perform a carrier unlock before changing the CSC or could I do it later on? I read that Samkey only works for phones that dont ask for unlock code. Mine does ask for a code when I insert another carrier's sim.
Thanks in advance for your help!
save all your data
install new firmware
you have a free apk here to change the CSC:
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
yakapa40 said:
save all your data
install new firmware
you have a free apk here to change the CSC:
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
Click to expand...
Click to collapse
@yakapa40, Thank you once again. Just want to make sure that the firmware mention before is the best one to use? I have attached the software information from my phone. Please let me know your opinion.
yes all is ok with your firmware
PGU:
GTO:
yakapa40 said:
yes all is ok with your firmware
PGU:
GTO:
Click to expand...
Click to collapse
@yakapa40 Thank you for your help. You are extremely knowledgeable on this topic! To be honest, I just realize how little I know about flashing even though I've been doing it since 2012. I feel like I understand firmware flashing less than I did before.
I just have a last question. If I flash the firmware with a CSC NEE, and than do the CSC change to GTO, which CSC will be used for future OTA updates? What I mean is, if there is a new NEE firmware will I get it, or will I have to wait for a new GTO update? Sorry, I am little confused with all of this.
G985F OXM is a multi CSC so if you flash the firmware with a CSC NEE , you will get XEF CSC by default
, and when you change to GTO you will get GTO OTA updates
https://forum.xda-developers.com/galaxy-s20/how-to/s20-g985f-firmwares-t4060279
yakapa40 said:
G985F OXM is a multi CSC so if you flash the firmware with a CSC NEE , you will get XEF CSC by default
, and when you change to GTO you will get GTO OTA updates
https://forum.xda-developers.com/galaxy-s20/how-to/s20-g985f-firmwares-t4060279
Click to expand...
Click to collapse
@yakapa40, I was finally able to flash the phone. I followed the steps and got the GTO CSC and the unbranded firmware working! Thank you for helping me throughout the whole process. The only down side was that I still lost the VoLTE and VoWifi options. When I look at the Sim Card Status menu, the IMS registration Status is "not registered". :crying: