Last week I brought a Morotola Xoom on ebay, it had 4.0 installed but I wasn't that impressed with it having got used to stock 4.1 on my phone.
I came across the great guide at http://forum.xda-developers.com/showthread.php?t=1477024 and used this along with http://wiki.cyanogenmod.org/w/Install_CM_for_wingray to unlock, root and install cyanogenmod 10.1 on it.
It was mostly a stress free install (although I managed to miss renaming the stock files that the post says causes Stock Recovery to overwrite CWM but it seems to still work OK.
My issue now is that I don't seem to have all the Google apps. It has gmail but not maps or market. I assumed that gmail isn't part of cyanogenmod so the 'gapps-jb-20130812-signed' file has installed (I think that file is the correct version).
It's not too clear from the instructions they read to me that you install the main CM zip and then Google apps without needing to re-boot in between, is this correct? I've tried a completely fresh install and also wiping the cache partition but no luck. But have not tried re-booting after installing the CM then installing Google Apps in a second boot, worth a try I guess.
Am I just making a simple noob error here? Thanks in advance for any advice.
A update, I've just tried formatting and re-installing again, only this time allowing a reboot into android prior to trying to install Google apps. One thing I've learnt is that the gmail app is part of the base install. Installing google apps appears to go ok but upon rebooting they aren't there. My next test is to try yet another clean install and an old version of gapps (gapps-jb-20120719-signed).
Chris
Motorola Xoom issues with 'Motorola fast-boot' replacing 'clockwork-recovery'
A further update... It's not gone well, it'd defaulted back to Motorola fast-boot protocol support not clockwork-recovery (after me initially forgetting to rename the files even though it's worked for many re-boots until now).
I've then tried to run back through the guidance at http://forum.xda-developers.com/showthread.php?t=1477024 to re-unlock and re-install clockwork-recovery.
However, it's not gone great, for a start it took me a while to work out to turn on usb debugging in Cyanogenmod 10.1 (see http://wiki.cyanogenmod.org/w/Doc:_developer_options) so adb can see it. After a couple of hours of messing about I've managed to get clockwork-recovery back on it.
However when booted into clockwork-recovery I got a 'error: device not found' from 'adb remount'. So I was not able to rename the files to prevent the Motorola fast-boot overwrite of clockwork-recovery eventually happening. When android is booted and it isn't in recovery I get a 'remount failed: Operation not permitted' response to adb remount. Is there another way to rename '/system/recovery-from-boot.p' and '/system/etc/install-recovery.sh' without having to do it do it at that first boot, it is interesting that clockwork-recovery survived several boots.
I've decided not to risk the install of a potentially unsupported zip of Google apps when my recovery situation isn't solid.
Hmm a fun morning, I've lost times now at how many times I've had to reroot it. I've managed to get the Google play store apk and have tried using that (in addition to installing the gapps zip) it is loading but complaining of no network connection.
With regard to renaming the files ' /system/recovery-from-boot.p' and 'system/etc/install-recovery.sh' I've not managed this, when the tablet reboots into clockwork recordery its connection with adb is dropped. I've also tried doing them in terminal when booted and they don't seem to be there.
There doesn't seem to be anyone else commenting on this so I'll just plod along blindly :silly:
c_dunne said:
A further update... It's not gone well, it'd defaulted back to Motorola fast-boot protocol support not clockwork-recovery (after me initially forgetting to rename the files even though it's worked for many re-boots until now).
I've then tried to run back through the guidance at http://forum.xda-developers.com/showthread.php?t=1477024 to re-unlock and re-install clockwork-recovery.
However, it's not gone great, for a start it took me a while to work out to turn on usb debugging in Cyanogenmod 10.1 (see http://wiki.cyanogenmod.org/w/Doc:_developer_options) so adb can see it. After a couple of hours of messing about I've managed to get clockwork-recovery back on it.
However when booted into clockwork-recovery I got a 'error: device not found' from 'adb remount'. So I was not able to rename the files to prevent the Motorola fast-boot overwrite of clockwork-recovery eventually happening. When android is booted and it isn't in recovery I get a 'remount failed: Operation not permitted' response to adb remount. Is there another way to rename '/system/recovery-from-boot.p' and '/system/etc/install-recovery.sh' without having to do it do it at that first boot, it is interesting that clockwork-recovery survived several boots.
I've decided not to risk the install of a potentially unsupported zip of Google apps when my recovery situation isn't solid.
Click to expand...
Click to collapse
Well, I'm with this problem too. I'm trying to solve this problem by myself, but no success at all. It do FC on google play every time it try to update. Every Google App (besides GMail) is doing FC with this CM build.
I tried to:
- Reinstall google apps
- Install another version (compatible with Android 4.2.2)
- Do the wipes again
- Install google play from an outside source (it doen't come with it).
But no success.
Any ideas?
miraidensetsu sorry for my delay in responding, I'm surprised that no other responses to this tread have been made. An update I've now resorted back to the stable release cm-10.0.0. Given it's nearly a year old I'd hope there'll be a stable release of 4.2 out soon.
Initially I had issues with the stock keyboard crashing all the time. But after searching about this I've installed the Google keyboard app and disabled the stock one.
READ ME FIRST I am more than willing to help you guys, so if you have questions, please ask me via my facebook page, as I get notifications there instantly. http://facebook.com/vacationlandtech
Also of note, I no longer have a LG G2, and it has been a long time since I made this, if you can be as descriptive as possible when asking questions, that would help a lot. Also, because it has been quite a while since I've been in the G2 community, I'm not up to speed on anything newer than early November, 2014. I don't have experience with ZVE+, CM12+, CloudyG3, etc. so if you have problems with new ROMs and software, get help from the people who make/support those ROMs and software.
Good luck!!
So I've been helping around the forums with people trying to install CyanogenMod on the Sprint LG G2 (LS-980). I have done this successfully and will outline my steps to do so below. A small caveat – I've only gotten this to work the way I'll outline below. I've tried getting CyanogenMod after the LS980ZVA/C/D OTA and no matter what I do I cannot get it to work. That being said, let's get to it.
Edit: I've added videos!!
Part 1: http://youtu.be/NRwlxeUprZE
Part 2: http://youtu.be/7rohyf_W13k
Part 3: http://youtu.be/Uw3J5ZTb3ro
*REMEMBER* - Always create Nandroid backups before flashing a ROM or doing anything, really.
Required Materials (some of these files (LS980ZV8_13.TOT) are over 2GB, FYI):
EDIT: I have put all the required files into a .ZIP archive and uploaded it to Mega
There has been a report that that the CyanogenMod .zip in my file is corrupt. You can still download the file I uploaded, just get CyanogenMod from the link below.
Update: I uploaded *just* the LS980ZV8_13.TOT file to Mega. Here is the link (beware it's not zipped, it's over 3GB).
Code:
* LS980ZV8_13.TOT - [URL]http://storagecow.eu/Xda/LG%20G2/Stock/Sprint/LS980ZV8_13.zip[/URL]
* LGLS980_20130904_LGFLASHv151.dll - [URL]http://storagecow.eu/Xda/LG%20G2/Stock/Sprint/LGLS980_20130904_LGFLASHv151.dll[/URL]
* LG Flash Tool - [URL]http://storagecow.eu/Xda/LG%20Software/TOT%20FlashTool/Setup_LGFlashTool_1.8.1.1023.exe[/URL]
* MegaLock.dll - [URL]http://storagecow.eu/Xda/LG%20Software/TOT%20FlashTool/MegaLock.dll[/URL]
* IOroot25 - [URL]http://downloads.codefi.re/autoprime/LG/ioroot/ioroot.zip[/URL]
* LG G2 (Verizon) USB Driver - [URL]http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00520120427[/URL]
* GApps - [url]https://s.basketbuild.com/gapps[/url]
Now, back up any files you want to keep from your phone. This process will remove EVERYTHING from your phone INCLUDING Internal Storage! Also install the USB Driver.
Let's get to it (please read all instructions before doing anything):
Resetting to Stock
Required files: LG Flash Tool, MegaLock.DLL, LS980ZV8_13.TOT, USB Drivers.
1. Install LG Flash Tool , but don't launch it yet!
2. Copy MegaLock.DLL to the root of the installation directory of LG Flash Tool.
3. Launch LG Flash Tool.
4. Check “Manual Mode”
5. Browse to the .DLL file you downloaded by clicking the “...” button to the right of the first text box.
6. Browse to the .TOT file (it'll have to be unzipped) by doing the same thing for the 2nd box.
7. Click okay, then click the green arrow at the top right of the window.
8. Wait for one of the boxes to turn green and say “Ready”
9. Turn off your phone.
10. Plug in the phone to your computer while holding the Vol+ key to put your phone in download mode.
11. Open Device Manager on your computer by pressing Win+R and typing “devmgmt.msc” without the quotes, then pressing enter.
12. Scroll down to “Ports” and expand it.
13. There will be an Android entry, right click it and select “Properties”
14. Select the Port Settings tab, and select Advanced.
15. Change the port number to 41.
16. You may have to unplug and reconnect your phone.
17. The box that said ready should now have some messages inside it (ie. “Waiting for connection.” and stuff about phone checks).
18. Allow the flash tool to do its job, after anywhere between 10 minutes and half an hour the phone will be done resetting. In my experience, the flash tool will always say there was an error after the phone reboots, this is because the phone reboots into Android, but the flash tool has done everything it needs, don't worry!
19. You can now unplug your phone and close LG Flash Tool.
20. Your phone is now on stock LG firmware LS980ZV8!
** - If you're going on to flash CyanogenMod, get through the initial set up, let the phone activate, but don't worry about getting apps or settings, they'll be gone after we flash CM.
Rooting
Required files: IOroot25, USB Drivers
** - I'm going to write this as if you've just reset to stock firmware.
1. Navigate to Settings > About Phone > Software Information
2. Tap on Build Number 7 times, or until there is a pop-up stating that “You are now a developer!”
3. Go back to Settings
4. Go into Developer Settings
5. Enable USB Debugging
6. Plug your phone into your computer.
** - If there is a RSA Fingerprint pop-up, accept it and check Remember this fingerprint
7. Navigate to Ioroot (you may have to extract/unzip the files) and execute root.BAT
8. Follow the on-screen instructions.
** - Note that Ioroot automatically backs up your EFS partition, make sure to keep these files in a safe location, as they can come in handy if something goes wrong.
9. After Ioroot is finished, you can close the program, unplug your phone and disable USB debugging.
10. You're now rooted, you may verify by downloading a Root Checker app from the Google Play Store.
Installing a Custom Recovery
Required Files: None
1. On your phone, navigate to the Google Play Store.
2. Search for FreeGee and install it.
3. Open FreeGee and allow it to download the device list.
4. After the download is finished, you will see a changelog list, close this.
5. Tap on install TWRP (or CWM if you're more comfortable with ClockWork Mod).
** - I recommend TeamWin Recovery Project for newer users because it is more end-user friendly, touch-capable, etc.
6. Wait for FreeGee to do its thing, then you have a custom recovery installed.
7. If you want to, let FreeGee reboot you into Recovery in order to verify.
Installing CyanogenMod 11
Required Files: CyanogenMod 11 ZIP, USB Drivers
** - Get the CyanogenMod 11 ZIP from https://download.cyanogenmod.org/?device=ls980 I recommend using the latest SNAPSHOT – get the NIGHTLY only if there are problems with the SNAPSHOT.
1. Place the CM 11 ZIP on the root directory of your internal storage.
2. Power off your phone (without it plugged in).
3. Turn on your phone holding PWR+VOL-Down until the screen says “Recovery mode”
** - The screen may say something about a factory reset, in this case press the power button 3 times and you'll be brought into recovery.
4. Tap on install
5. Scroll down to the CM 11 ZIP and tap it
6. Follow the instructions and when prompted to wipe the dalvik and cache, select yes.
** - you may have to do an advanced wipe and select everything except for internal storage, but do this only if CyanogenMod doesn't install properly.
7. You now have CyanogenMod 11 on your phone!
**- You will have to install GApps in order to access the Google Play Store and other Google Apps. You can download it using the browser on your phone or by transferring the .zip file to the root of your phone.
**- To install GApps just boot into recovery, select Install, and navigate to the GApps .zip. Swipe to install.
If you have any questions or any issues, just let me know. Not everything is accurate as I don't have access to Windows right now so I'm going based off memory. I plan on reinstalling Windows 8.1 Professional and making a video to go along with this. If at any point throughout this walkthrough you find inaccurate information or something goes wrong, let me know and I'll help out/update the article. Good luck!
Thanks so much for your sharing this. I have downgrade my phone from ZVD to ZV7 and get it rooted and CM11 installed. However, I found CM11 is not stable and my GPS module didn't work now. Could you recommend a everyday-use ROM with tethering capability? Many thanks.
damiloveu said:
Thanks so much for your sharing this. I have downgrade my phone from ZVD to ZV7 and get it rooted and CM11 installed. However, I found CM11 is not stable and my GPS module didn't work now. Could you recommend a everyday-use ROM with tethering capability? Many thanks.
Click to expand...
Click to collapse
I use CyanogenMod 11 as my everyday ROM, never have any issues (besides some personal preferences). To confirm that you have a good stable build, check your build number and info. I will post mine below for you to compare to.
To check your build number navigate to Settings > About Phone
Code:
Model Number.................LG-LS980
CyanogenMod Version..........11-20140804-SNAPSHOT-M9-ls980
Android Version..............4.4.4
Baseband Version.............M8974A-AAAANAZM-1.0.190034
Kernel Version...............3.4.0-CM+
[email protected] #1
.............................Sun Aug 3 22:34:14 PDT 2014
I used this download for my CM: Direct Download from CyanogenMod
official.xian said:
I use CyanogenMod 11 as my everyday ROM, never have any issues (besides some personal preferences). To confirm that you have a good stable build, check your build number and info. I will post mine below for you to compare to.
To check your build number navigate to Settings > About Phone
Code:
Model Number.................LG-LS980
CyanogenMod Version..........11-20140804-SNAPSHOT-M9-ls980
Android Version..............4.4.4
Baseband Version.............M8974A-AAAANAZM-1.0.190034
Kernel Version...............3.4.0-CM+
[email protected] #1
.............................Sun Aug 3 22:34:14 PDT 2014
I used this download for my CM: Direct Download from CyanogenMod
Click to expand...
Click to collapse
I am using the same ROM as yours. I will flash back to Stock ROM and if the GPS still doesn't work, I have to contact LG to get a replace one.
damiloveu said:
I am using the same ROM as yours. I will flash back to Stock ROM and if the GPS still doesn't work, I have to contact LG to get a replace one.
Click to expand...
Click to collapse
Sounds good. I can confirm that my GPS works fine on this ROM so... Good luck. Let me know if you have any questions!
Can U help me with this....
I have LG G2 LS980ZVC Rooted device, and SuperUser is installed.
I want to migrate from stock ROM to CyanogenMod ROM.
But I want the device to work as of the LG G2 D802 (International).
As I will be using it in INDIA (GSM 850/900/1800/1900).
I am very much new to Android and confused to pick the ROM and about the installation procedure.
Seek expert advice about this concern.
Plz suggest... ( attach Hyper link of threads / Videos about the procedure of installation and ROM download link while replying).
Thanks in Advance.......
AJ, I will do some research as to unlocking this phone. I am a bit busy right now but I'll reply by the end of the day.
This phone is already unlocked and works fine with Indian SIM
This phone is already unlocked and works fine with any Indian SIM. I Just want to migrate to CyanogenMod ROM.
official.xian said:
AJ, I will do some research as to unlocking this phone. I am a bit busy right now but I'll reply by the end of the day.
Click to expand...
Click to collapse
I can't find any information regarding unlocking on CyanogenMod specifically, but maybe you could do the same steps at: http://forum.xda-developers.com/showthread.php?t=2655133 after you follow my instructions to install CyanogenMod.
:Confused
This phone is already unlocked and works fine with any Indian SIM.
I am Just confused to pick between these two CyanogenMod ROMs :
1. (ls980 LG G2 (Sprint))
https://download.cyanogenmod.org/?device=ls980
https://download.cyanogenmod.org/get/jenkins/78482/cm-11-20140804-SNAPSHOT-M9-ls980.zip
OR
2. (d802 LG G2 (Intl))
https://download.cyanogenmod.org/?device=d802
https://download.cyanogenmod.org/get/jenkins/78458/cm-11-20140804-SNAPSHOT-M9-d802.zip
And any guidelines to install the CynogenMod ROM, as I am New to this.
Thanks in Advance. .
official.xian said:
I can't find any information regarding unlocking on CyanogenMod specifically, but maybe you could do the same steps at: http://forum.xda-developers.com/showthread.php?t=2655133 after you follow my instructions to install CyanogenMod.
Click to expand...
Click to collapse
Never, I repeat NEVER flash or install ANYTHING that is not specifically for your phone!! This is the fastest way to brick your device, possibly permanently. I understand that you have already unlocked your phone, but you've done so on a stock ROM. What I was saying is follow my instructions to install CyanogenMod (the LS980 version) on your phone, then (re)unlock it following the instructions at the thread I linked to. I'm not sure how to unlock on CM11, but it can be done: LG G2 LS980 GSM UNLOCKED!: http://youtu.be/r8XCpm046-k
damiloveu said:
Thanks so much for your sharing this. I have downgrade my phone from ZVD to ZV7 and get it rooted and CM11 installed. However, I found CM11 is not stable and my GPS module didn't work now. Could you recommend a everyday-use ROM with tethering capability? Many thanks.
Click to expand...
Click to collapse
I did try and after a lot of got it to work CM11, you only need ZV8 modem/radio.
Had problems with the GPS even try a lot of apps none of them got it to work, then change the gps.conf file for the orginal LG conf and worked great. The only ROM that the GPS worked since the start was PA all of the others are based on CM so the file wont work, at least for me.
The gps.conf file its on "etc" folder.
CM really its great but to me Omni and most of all that i try in this days (trying to get a good GPS just to play Ingress) Its PA
Good luck
emi_fer said:
I did try and after a lot of got it to work CM11, you only need ZV8 modem/radio.
Had problems with the GPS even try a lot of apps none of them got it to work, then change the gps.conf file for the orginal LG conf and worked great. The only ROM that the GPS worked since the start was PA all of the others are based on CM so the file wont work, at least for me.
The gps.conf file its on "etc" folder.
CM really its great but to me Omni and most of all that i try in this days (trying to get a good GPS just to play Ingress) Its PA
Good luck
Click to expand...
Click to collapse
I've never had an issue with CyanogenMod. If you wipe before you install and don't do anything funky with it you shouldn't have a problem. Following my instructions CyanogenMod works flawlessly (for me at least).
official.xian said:
I've never had an issue with CyanogenMod. If you wipe before you install and don't do anything funky with it you shouldn't have a problem. Following my instructions CyanogenMod works flawlessly (for me at least).
Click to expand...
Click to collapse
Always Wipe data/Factory reset when change to a different ROM, as i said the only one that worked for me its PA because uses the stock gps.conf thats all
emi_fer said:
Always Wipe data/Factory reset when change to a different ROM, as i said the only one that worked for me its PA because uses the stock gps.conf thats all
Click to expand...
Click to collapse
How long ago did you have problems?
official.xian said:
So I've been helping around the forums with people trying to install CyanogenMod on the Sprint LG G2 (LS-980). I have done this successfully and will outline my steps to do so below. A small caveat – I've only gotten this to work the way I'll outline below. I've tried getting CyanogenMod after the LS980ZVA/C/D OTA and no matter what I do I cannot get it to work. That being said, let's get to it.
*REMEMBER* - Always create Nandroid backups before flashing a ROM or doing anything, really.
Required Materials (some of these files (LS980ZV8_13.TOT) are over 2GB, FYI):
Code:
* LS980ZV8_13.TOT - [URL]http://storagecow.eu/Xda/LG%20G2/Stock/Sprint/LS980ZV8_13.zip[/URL]
* LGLS980_20130904_LGFLASHv151.dll - [URL]http://storagecow.eu/Xda/LG%20G2/Stock/Sprint/LGLS980_20130904_LGFLASHv151.dll[/URL]
* LG Flash Tool - [URL]http://storagecow.eu/Xda/LG%20Software/TOT%20FlashTool/Setup_LGFlashTool_1.8.1.1023.exe[/URL]
* MegaLock.dll - [URL]http://storagecow.eu/Xda/LG%20Software/TOT%20FlashTool/MegaLock.dll[/URL]
* IOroot25 - [URL]http://downloads.codefi.re/autoprime/LG/ioroot/ioroot.zip[/URL]
* LG G2 (Verizon) USB Driver - [URL]http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00520120427[/URL]
Now, back up any files you want to keep from your phone. This process will remove EVERYTHING from your phone INCLUDING Internal Storage! Also install the USB Driver.
Let's get to it (please read all instructions before doing anything):
Resetting to Stock
Required files: LG Flash Tool, MegaLock.DLL, LS980ZV8_13.TOT, USB Drivers.
1. Install LG Flash Tool , but don't launch it yet!
2. Copy MegaLock.DLL to the root of the installation directory of LG Flash Tool.
3. Launch LG Flash Tool.
4. Check “Manual Mode”
5. Browse to the .DLL file you downloaded by clicking the “...” button to the right of the first text box.
6. Browse to the .TOT file (it'll have to be unzipped) by doing the same thing for the 2nd box.
7. Click okay, then click the green arrow at the top right of the window.
8. Wait for one of the boxes to turn green and say “Ready”
9. Turn off your phone.
10. Plug in the phone to your computer while holding the Vol+ key to put your phone in download mode.
11. Open Device Manager on your computer by pressing Win+R and typing “devmgmt.msc” without the quotes, then pressing enter.
12. Scroll down to “Ports” and expand it.
13. There will be an Android entry, right click it and select “Properties”
14. Select the Port Settings tab, and select Advanced.
15. Change the port number to 41.
16. You may have to unplug and reconnect your phone.
17. The box that said ready should now have some messages inside it (ie. “Waiting for connection.” and stuff about phone checks).
18. Allow the flash tool to do its job, after anywhere between 10 minutes and half an hour the phone will be done resetting. In my experience, the flash tool will always say there was an error after the phone reboots, this is because the phone reboots into Android, but the flash tool has done everything it needs, don't worry!
19. You can now unplug your phone and close LG Flash Tool.
20. Your phone is now on stock LG firmware LS980ZV8!
** - If you're going on to flash CyanogenMod, get through the initial set up, let the phone activate, but don't worry about getting apps or settings, they'll be gone after we flash CM.
Rooting
Required files: IOroot25, USB Drivers
** - I'm going to write this as if you've just reset to stock firmware.
1. Navigate to Settings > About Phone > Software Information
2. Tap on Build Number 7 times, or until there is a pop-up stating that “You are now a developer!”
3. Go back to Settings
4. Go into Developer Settings
5. Enable USB Debugging
6. Plug your phone into your computer.
** - If there is a RSA Fingerprint pop-up, accept it and check Remember this fingerprint
7. Navigate to Ioroot (you may have to extract/unzip the files) and execute root.BAT
8. Follow the on-screen instructions.
** - Note that Ioroot automatically backs up your EFS partition, make sure to keep these files in a safe location, as they can come in handy if something goes wrong.
9. After Ioroot is finished, you can close the program, unplug your phone and disable USB debugging.
10. You're now rooted, you may verify by downloading a Root Checker app from the Google Play Store.
Installing a Custom Recovery
Required Files: None
1. On your phone, navigate to the Google Play Store.
2. Search for FreeGee and install it.
3. Open FreeGee and allow it to download the device list.
4. After the download is finished, you will see a changelog list, close this.
5. Tap on install TWRP (or CWM if you're more comfortable with ClockWork Mod).
** - I recommend TeamWin Recovery Project for newer users because it is more end-user friendly, touch-capable, etc.
6. Wait for FreeGee to do its thing, then you have a custom recovery installed.
7. If you want to, let FreeGee reboot you into Recovery in order to verify.
Installing CyanogenMod 11
Required Files: CyanogenMod 11 ZIP, USB Drivers
** - Get the CyanogenMod 11 ZIP from https://download.cyanogenmod.org/?device=ls980 I recommend using the latest SNAPSHOT – get the NIGHTLY only if there are problems with the SNAPSHOT.
1. Place the CM 11 ZIP on the root directory of your internal storage.
2. Power off your phone (without it plugged in).
3. Turn on your phone holding PWR+VOL-Down until the screen says “Recovery mode”
** - The screen may say something about a factory reset, in this case press the power button 3 times and you'll be brought into recovery.
4. Tap on install
5. Scroll down to the CM 11 ZIP and tap it
6. Follow the instructions and when prompted to wipe the dalvik and cache, select yes.
** - you may have to do an advanced wipe and select everything except for internal storage, but do this only if CyanogenMod doesn't install properly.
7. You now have CyanogenMod 11 on your phone!
If you have any questions or any issues, just let me know. Not everything is accurate as I don't have access to Windows right now so I'm going based off memory. I plan on reinstalling Windows 8.1 Professional and making a video to go along with this. If at any point throughout this walkthrough you find inaccurate information or something goes wrong, let me know and I'll help out/update the article. Good luck!
Click to expand...
Click to collapse
I am in the process of resetting everything back to stock. However, I was reading other articles and it mentioned that you must choose the correct files that correspond to either the 16gigs or 32 gigs. In this set of instructions however, it only provides users with one zv8 file for download. I just don't want to mess something up by using the incorrect files. Would appreciate someone's help. Thanks
Robles23 said:
I am in the process of resetting everything back to stock. However, I was reading other articles and it mentioned that you must choose the correct files that correspond to either the 16gigs or 32 gigs. In this set of instructions however, it only provides users with one zv8 file for download. I just don't want to mess something up by using the incorrect files. Would appreciate someone's help. Thanks
Click to expand...
Click to collapse
I have seen what you're talking about elsewhere but I don't believe that this applies in this situation. I have the 32GB LS980, and haven't had an issue, still have all my storage space. From everything that I've gathered from the internet when learning how to do everything a wrote the size doesn't matter. If you're still concerned I can do some more digging, but I don't think you'll have a problem.
official.xian said:
I have seen what you're talking about elsewhere but I don't believe that this applies in this situation. I have the 32GB LS980, and haven't had an issue, still have all my storage space. From everything that I've gathered from the internet when learning how to do everything a wrote the size doesn't matter. If you're still concerned I can do some more digging, but I don't think you'll have a problem.
Click to expand...
Click to collapse
Very much appreciate your answer brother. I also have a 32gb model. No need to do more research. I will try this method ones I get home from work today. Ones again, I appreciate your repay and tutorial.
Robles23 said:
Very much appreciate your answer brother. I also have a 32gb model. No need to do more research. I will try this method ones I get home from work today. Ones again, I appreciate your repay and tutorial.
Click to expand...
Click to collapse
Glad to help. If you feel unsure about anything I'm also working on a video to upload to YouTube as well (after I finish it I'll edit the OP) that goes over the process. Good luck.
official.xian said:
Glad to help. If you feel unsure about anything I'm also working on a video to upload to YouTube as well (after I finish it I'll edit the OP) that goes over the process. Good luck.
Click to expand...
Click to collapse
Hell yeah I will love to watch and follow that tutorial. I will wait for it. Thank you!
I just downloaded to my XT1575 and I don't know which directory it downloaded to? Any ideas?
glfngmble said:
I just downloaded to my XT1575 and I don't know which directory it downloaded to? Any ideas?
Click to expand...
Click to collapse
/data/data/org.lineageos.updater/app_updates
jhedfors said:
/data/data/org.lineageos.updater/app_updates
Click to expand...
Click to collapse
Thank You.
There is no folder /app_updates. There is just a folder named "files", but this folder is completely empty.
By the way: I got this file structure on my G4: \Android\data\org.lineageos.updater\files.
I had to manually download the package and install it manually in recovery, but the updater says still to update the current version.
rigattoni said:
There is no folder /app_updates. There is just a folder named "files", but this folder is completely empty.
By the way: I got this file structure on my G4: \Android\data\org.lineageos.updater\files.
I had to manually download the package and install it manually in recovery, but the updater says still to update the current version.
Click to expand...
Click to collapse
/data/data/org.lineageos.updater/app_updates
The updater does not recognize what version is installed, just if the update is in the folder.
jhedfors said:
/data/data/org.lineageos.updater/app_updates
The updater does not recognize what version is installed, just if the update is in the folder.
Click to expand...
Click to collapse
If this is reduced to this single folder I can say that my G4 has no folder with this name.
The download completed and the updater asks for updating the unit.
The G4 restarts into recovery mode and nothing happens. Manual search for the downloaded files have not been successful.
I restarted my G4 and searched manually with root rights (just to be sure the files are not hidden in non root search) and I could not find any update file.
The lineage updater still shows to update the phone, even that there whether is a folder named "/data/org.lineageos.updater/app_updates"
nor a file in the "\data\org.lineageos.updater\files.
So... is this an issue with the updater, ROM or is this just not implemented complete?
I have no issues to manually install anything by console or TWRP or what ever else.
Once again: The update file(s) seem to be lost in transit. They are not stored on the system.
The updater still shows the install button even if there is nothing to install.
rigattoni said:
If this is reduced to this single folder I can say that my G4 has no folder with this name.
The download completed and the updater asks for updating the unit.
The G4 restarts into recovery mode and nothing happens. Manual search for the downloaded files have not been successful.
I restarted my G4 and searched manually with root rights (just to be sure the files are not hidden in non root search) and I could not find any update file.
The lineage updater still shows to update the phone, even that there whether is a folder named "/data/org.lineageos.updater/app_updates"
nor a file in the "\data\org.lineageos.updater\files.
So... is this an issue with the updater, ROM or is this just not implemented complete?
I have no issues to manually install anything by console or TWRP or what ever else.
Once again: The update file(s) seem to be lost in transit. They are not stored on the system.
The updater still shows the install button even if there is nothing to install.
Click to expand...
Click to collapse
Are you sure you are looking in the right folder? Your stated path shows :
"\data\org.lineageos.updater"
Was that just a typo?
This where it is in my device:
"/data/data/org.lineageos.updater/app_updates" (note the nested "data" in "data")
Also, I think that if it shows "install" it means that it has been downloaded (and exist), otherwise it would show "download".
jhedfors said:
Are you sure you are looking in the right folder? Your stated path shows :
"\data\org.lineageos.updater"
Was that just a typo?
This where it is in my device:
"/data/data/org.lineageos.updater/app_updates" (note the nested "data" in "data")
Also, I think that if it shows "install" it means that it has been downloaded (and exist), otherwise it would show "download".
Click to expand...
Click to collapse
Shame on me... I searched with root rights and could not find the folder.... Seems I need new glasses.
But the folder is there and yes, the download is in there.
So single issue is, why the updater does not call the update automatically for flashing the update.
rigattoni said:
Shame on me... I searched with root rights and could not find the folder.... Seems I need new glasses.
But the folder is there and yes, the download is in there.
So single issue is, why the updater does not call the update automatically for flashing the update.
Click to expand...
Click to collapse
Hmmm... TWRP should be able to handle the script created by the updater. You may want to check on the G4 forum to see if others have the same issue.
jhedfors said:
Hmmm... TWRP should be able to handle the script created by the updater. You may want to check on the G4 forum to see if others have the same issue.
Click to expand...
Click to collapse
the guys in the G4 forum are mostly connected to the unofficial version. a complete manual installation is required.
But there are some rumors in the German forum, who are using the official LineAgeOS version, where the updater script is not working.
I´ll wait for the next update in a week... may be it´s just a minor issue which will be fixed soon.
is it possible to change that path?
The path *HAS* been changed.
It's now downloading OTA updates to /data/lineageos_updates
Which a pain in the ass, because TWRP already doesn't automatically handle the script as expected on my Note3, and, I'd already gotten used to having to go to /data/data/org.lineageos.updates.
Hrmph.
darrylhadfield said:
The path *HAS* been changed.
It's now downloading OTA updates to /data/lineageos_updates
Which a pain in the ass, because TWRP already doesn't automatically handle the script as expected on my Note3, and, I'd already gotten used to having to go to /data/data/org.lineageos.updates.
Hrmph.
Click to expand...
Click to collapse
Thank you!!!! :victory::victory::victory: It works!!
rarmz said:
Thank you!!!! :victory::victory::victory: It works!!
Click to expand...
Click to collapse
Happy to help!
Now, if I can just get the attention of whoever the device maintainer is, for the Note3, to figure out the TWRP scripting issue...
Hi folks,
I got my RN5 AI Global a couple of days ago and I want to give Lineage OS a spin. Then I read about this dreaded feature of Google called "ARB" - a developer's nightmare!
My current version is 9.5.17 on my phone. When I change into settings I can see that 9.5.19 has been downloaded and is ready for installation, the only action I have to do is reboot. Since 9.5.19 carries ARB feature, I do not power down my phone in order not to install this fix.
So guys, here is my question: Is there any way I can prevent this update from installing on my phone?
Best wishes,
DFahren
Don't install it?
Just power down and go straight to fastboot (power+voldown) then use mi unlock to unlock then flash lineage after doing twrp.
Not that it would matter too much having 9.5.19 since you can bypass it blocking fastboot commands with the arbypass.img file
Nice idea. However my Mi account is not (yet) eligible for unlocking .... This will take 14 days, I suppose.
Delete the update from internal storage/downloaded_rom
And also turn off automatic updates so you don't get it again.
"If you are on MIUI 9, then:
- Go to Settings
- About Phone
- System Updates
- Click on 3 dots above right
- Turn Off both "Download Automatically" and "Download using Mobile Data"."
And you should be able to reboot your device.
Ok, what you are basically saying is: open a CMD on Windows, issue an "adb shell" and in this shell do a "cd xxx/storage/downloaded_rom; rm *", right?!
I have to do this because I do not see this folder downloaded_rom when using MIUI's filemanager. Correct?
Cheers, Dfahren
corkiejp said:
Delete the update from internal storage/downloaded_rom
And also turn off automatic updates so you don't get it again.
"If you are on MIUI 9, then:
- Go to Settings
- About Phone
- System Updates
- Click on 3 dots above right
- Turn Off both "Download Automatically" and "Download using Mobile Data"."
And you should be able to reboot your device.
Click to expand...
Click to collapse
@dfahren
Maybe try a different file manager than stock.
Someone else reported on another forum that they deleted the downloaded update.
Not sure how exactly, I will message them and find out how.
dfahren said:
Ok, what you are basically saying is: open a CMD on Windows, issue an "adb shell" and in this shell do a "cd xxx/storage/downloaded_rom; rm *", right?!
I have to do this because I do not see this folder downloaded_rom when using MIUI's filemanager. Correct?
Cheers, Dfahren
Click to expand...
Click to collapse
corkiejp said:
@dfahren
Maybe try a different file manager than stock.
Someone else reported on another forum that they deleted the downloaded update.
Not sure how exactly, I will message them and find out how.
Click to expand...
Click to collapse
I deleted the update zip file using solid explorer.
Sent from my Redmi Note 5 using Tapatalk
....deleted ....
gsmyth said:
I deleted the update zip file using solid explorer.
Click to expand...
Click to collapse
Yeah, that's also a good way to get rid of the update.
I used ADB with installed drivers. However path to the update was ..../sdcard/downloaded_rom , but that's a minor. Just wanted to let you guys know.