LineageOS-11.0 for the Xiaomi Redmi 1S [UNOFFICIAL][DISCONTINUED]

LineageOS-11.0 for the Xiaomi Redmi 1S [UNOFFICIAL][DISCONTINUED] - Xiaomi Redmi 1S

Thanks mate for keeping the Beast Alive.
Surely try it.
Edited: flashing successful but phone is not boot up.
Error message pop-up encryption unsuccessful reset phone

mharis0786 said:
Thanks mate for keeping the Beast Alive.
Surely try it.
Edited: flashing successful but phone is not boot up.
Error message pop-up encryption unsuccessful reset phone
Click to expand...
Click to collapse
Thank you for testing it out.
However, I have personally tested it (it's my daily ROM) and it has booted up fine.
Do you have encryption on from the previous ROM?
Try formatting System, data, cache, dalvik and internal storage, and then try installing.

malvigagan said:
Thank you for testing it out.
However, I have personally tested it (it's my daily ROM) and it has booted up fine.
Do you have encryption on from the previous ROM?
Try formatting System, data, cache, dalvik and internal storage, and then try installing.
Click to expand...
Click to collapse
I performed a full wipe(system,cache,Dalvik cache, Data, Internal storage) before flashing this rom & flashed this rom using adb sideload in twrp.
I tried to reset the phone when encrypyion unsuccessful message appears but still no success.
I flashed firmware 8.2.1.0 zip before flashing this.

Hey there ,thank you for making this ROM it works flawlessly on my old 1s, installed error free all working perfectly very smooth and stable can't thank you enough keep it up ....

mharis0786 said:
I performed a full wipe(system,cache,Dalvik cache, Data, Internal storage) before flashing this rom & flashed this rom using adb sideload in twrp.
I tried to reset the phone when encrypyion unsuccessful message appears but still no success.
I flashed firmware 8.2.1.0 zip before flashing this.
Click to expand...
Click to collapse
Please try flashing MIUI 9.2.1.0 firmware before flashing, and please report to me after you've flashed. Thank you for testing.

clockstoper said:
Hey there ,thank you for making this ROM it works flawlessly on my old 1s, installed error free all working perfectly very smooth and stable can't thank you enough keep it up ....
Click to expand...
Click to collapse
You're welcome

malvigagan said:
Please try flashing MIUI 9.2.1.0 firmware before flashing, and please report to me after you've flashed. Thank you for testing.
Click to expand...
Click to collapse
Link please..!

mharis0786 said:
Link please..!
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=673956719939818079
thanks to @hemantbeast sur

malvigagan said:
https://androidfilehost.com/?fid=673956719939818079
thanks to @hemantbeast sur
Click to expand...
Click to collapse
this time phone boot up properly but whenever I select language in language selection part
This error pop-up "Unfortunately, Setup wizard has stopped"
Appears only when I flashed gapps alongwith the rom.
Tried both open gapps & delta gapps 4.4.
Without flashing gapps phone boots up at homescreen with no issue.

mharis0786 said:
this time phone boot up properly but whenever I select language in language selection part
This error pop-up "Unfortunately, Setup wizard has stopped"
Appears only when I flashed gapps alongwith the rom.
Tried both open gapps & delta gapps 4.4.
Without flashing gapps phone boots up at homescreen with no issue.
Click to expand...
Click to collapse
Try flashing immediately after ROM install in TWRP.

malvigagan said:
Try flashing immediately after ROM install in TWRP.
Click to expand...
Click to collapse
Confirmed Working..!

mharis0786 said:
Confirmed Working..!
Click to expand...
Click to collapse
Glad I resolved your issue

Enable KVM on our kernel?
Hi @malvigagan,
If possible could you please enable KVM support for our kernel?
Or could you provide a guide to do so and compile the kernel.

abhishekraj said:
Hi @malvigagan,
If possible could you please enable KVM support for our kernel?
Or could you provide a guide to do so and compile the kernel.
Click to expand...
Click to collapse
I'm sorry, but is there another kernel for other device with KVM? Because I don't seem to find it. Ask @hemantbeast surr he does a lot of kernel stuff.

KVM support
malvigagan said:
I'm sorry, but is there another kernel for other device with KVM? Because I don't seem to find it. Ask @hemantbeast surr he does a lot of kernel stuff.
Click to expand...
Click to collapse
Hmm I don't know any kernel for our device but Samsung galaxy s8 has a kernel with KVM enabled and nowadays all Xioami, Realme etc. devices comes with KVM enabled.
Apparently we have to add this to the config-
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ARM_HOST=y
I will try setting up my computer for development and try this.
Do you have an instructions for how to compile the kernel on my machine? Is it similar to compiling normal Linux kernel or I will have to setup cross compilers?

abhishekraj said:
Hmm I don't know any kernel for our device but Samsung galaxy s8 has a kernel with KVM enabled and nowadays all Xioami, Realme etc. devices comes with KVM enabled.
Apparently we have to add this to the config-
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ARM_HOST=y
I will try setting up my computer for development and try this.
Do you have an instructions for how to compile the kernel on my machine? Is it similar to compiling normal Linux kernel or I will have to setup cross compilers?
Click to expand...
Click to collapse
@abhishekraj, I have asked @hemantbeast bro, he's already implemented KVM on Phantom Kernel.
You can check, according to him it has been implemented, but not present in any KK kernel because device can handle KitKat easily, but this ROM has kernel based off his Phantom source which has KVM enabled

Please add. Screenshots malvi

Alan Jose said:
Please add. Screenshots malvi
Click to expand...
Click to collapse
Soon.

I can't find the link for this rom

Related

[ROM][4.4.4] CyanogenMod 11.0 for A3000-H [23/10/2015]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
NOT WORKING
Camera
WORKING
GPS
WiFi
Audio
Boots
SELinux
Sensors
Vibration
Bluetooth
HWComposer
Offmode charging
sw video en/decoding (not hw)
Internal and external sdcards
RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)
NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports
DOWNLOAD
Instructions:
ordinarystar said:
Pre-equisites to flash:
1. Correct Firmware
1.1 First verify your build version by installing Terminal Emulator from Play Store and then type the following:
getprop ro.product.board
if the output is a3000_prc_3gfull, proceed to number 2.
1.2 if the output is not a3000_prc_3gfull, you will have to first flash another firmware which can be downloaded at:
https://drive.google.com/file/d/0B5yhZ9sXUH_GMWhCQllhbkZRbUk/edit
Firmware flashing instructions can be referred here:
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
2. My version of CWM installed
2.1 Now you should install the CWM. You need a rooted device to proceed. Assuming you followed 1.1 and 1.2, your device is already rooted.
You will need:
2.1.1 Install mobileuncle MTK Tools from PlayStore or download apk from thread below: http://forum.xda-developers.com/showthread.php?t=2697236
2.1.2 My CWM, download the zip file and extract the recovery.img. Put the recovery.img in your microSD card.
http://olivier.hubdroid.com/a3/cwm/cwm_a3-20141220.zip
2.2 Open up mobileuncle MTK Tools, and select install recovery. It will detect the recovery.img in your microSD card (top in the list).
Tap on it to install. DO NOT tap on others in the list. Just click OK to install. If you have already downloaded my rom with it placed in your microSD card,
you may proceed to boot into recovery, or you can press cancel and shut down your device.
The pre-equisites is now completed!
Steps to flash:
1. Download my rom from http://olivier.hubdroid.com/a3/cm-11.0/ - select a preferred release. latest release recommended.
2. Download gapps from http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693 - select gapps for kit kat 4.4.4
2. Boot up recovery: hold power button and volume up button, as it booted up release power button. Use volume up button to browse to "recovery mode" and press volume down to proceed recovery mode.
3. Do the following:
2.1 Factory reset
2.2 Clear cache
2.3 Clear dalvik cache (Advanced > clear dalvik cache)
2.4 install from zip, select the rom and install
2.5 install gapps.
2.6 when done, reboot to system
The installation is now completed!
Click to expand...
Click to collapse
I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated.
My builds can be found here.
SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)
CREDITs
chrmhoffmann
kashifmin
Grarak
xplodwild
Dr-Shadow
superdragonpt
EnerJon
kupyxa4444
XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-26
Last Updated 2015-10-23

Changelog
BUILD STATUS
Willing to contribute? Just drop me a PM, send me pull requests on GitHub or join my IRC channel on freenode: #cm-a3!
Please don't clutter the thread, post your bug reports here instead. Thanks!
CHANGELOG
Code:
[B][U]29/07/2015:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Fixed automatic rotation
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Removed scsi_wait_scan module
[*][/list]
[B][U]02/02/2015:[/U][/B]
[list][*]Fixed sw encoding and decoding ([B][COLOR="Lime"]YouTube videos etc work now![/COLOR][/B])
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Reverted to LZMA compression (for TWRP)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Misc patches for ext4, crypto
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added support for kernel mode NEON
[*][/list]
[B][U]28/12/2014:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Switched to LZ4 compression (instead of LZMA)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added overall stats for all available cores
[*]Fixed battery capacity (item in framework-res)
[*][/list]
[B][U]26/12/2014:[/U][/B]
[list][*]Switched back to deodexed build on community request
[*]Removed recovery-from-boot.p (we don't really want this)[/list]
[B][U]20/12/2014:[/U][/B]
[list][*]Fixed Internal sdcard[/list]
[B][U]17/12/2014:[/U][/B]
[list][*]Fixed HWComposer
[*]Odexed build for better performance[/list]
[B][U]16/12/2014:[/U][/B]
[list][*]Fixed NVRAM
[*]Fixed Bluetooth
[*]Fixed RIL[/list]
[B][U]26/11/2014:[/U][/B]
[list][*]Initial public release.[/list]

Successfully flashed over A3000_A422_013_25_140624.
Felt like holding a nexus 7!
Thanks a lot man!

Thanks
Thanks Olivier for your enormous efforts, you are working alone , You rock
successfully installed it over A3000_A422_013_025_140926_WW_CALL_FUSE
Using this build "cm-11-20141127-UNOFFICIAL-a3"
I'm testing it , and i'm going to report the bugs i find via the bug report
Again , thanks

This is the best post on XDA so far.
Thank you for your effort @Olivier

Think you Sir...is it support Call function ?
i will try it soon...

Hesham Sleem said:
Think you Sir...is it support Call function ?
i will try it soon...
Click to expand...
Click to collapse
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***

nut27455 said:
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
Click to expand...
Click to collapse
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??

Hesham Sleem said:
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Click to expand...
Click to collapse
No. Guys, it's clearly stated in the OP that RIL/radio (and hence calls/SMS) is broken!

New user
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??

Magiiic said:
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Click to expand...
Click to collapse
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)

MirXas said:
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
Click to expand...
Click to collapse
Any solve to this problem's?

Magiiic said:
Any solve to this problem's?
Click to expand...
Click to collapse
Wait for future builds.
Stop asking questions in this thread, there is a seperate Q&A thread especially for this.

Really great work
Only the camera to go and I'll use this I promise
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app

Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Sent from my Lenovo A3000-H
MOD EDIT: Not a great sense posting some other ROM LINK here

afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
STOP spaming the same everywhere ! The RIL bug is not in the kernel, it's in the ROM itself.
Click to expand...
Click to collapse

Members,
It is not so difficult to be sensible and considerate.
1) Kindly stop asking questions here. Use the Q&A.
2) If you find something not to your liking, find something which you like or produce what you like by yourself
THREAD CLEANED.

OP thankyou for this works very well with my F version ,never seen HD video load so fast

afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Click to expand...
Click to collapse
Yes, the CM11 kernel is based off my HodorKernel. Apparently the kernel isn't the problem here - you could flash it on any fused Stock ROM and everything would work.
To those who wanted ETAs: At the moment, I'm a bit busy with exams and other devices. Bugfixing is progressing rather slowly, not only due to time constraints but also because I'm working on this alone and it's not easy to work on mtk devices.

keep up the good work.
you can make it buddy.

[ROM][UNOFFICIAL][8.1.x][20180605]CarbonROM | cr-6.1 [walleye]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pre-Disclaimer
Unoffical CarbonROM builds for Pixel 2 (aka walleye). I am new to this so don't expect miracles. Neither me, CarbonROM team or xda are responsible for any bricked devices. You are doing this at your own risk.
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
About CarbonROM
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Disclaimer
While every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Features
https://carbonrom.org/
Support
1) Search. Search, search, search.
2) Ask here, be respectful and have a good time.
Notice
A few Google apps including Google Play Store are baked in. No need to flash gapps.
Pre-Requistes
Make sure you have a backup of all your important data.
Resources
TWRP for Pixel 2 (walleye)
Latest factory Images for Pixel 2 (walleye)
Install Instructions - Coming from Stock
1. Flash the newest factory images on both slots. (yes you will loose your Data). Boot into Android once.
2. Move ROM + TWRP.zip to your internal storage
3. Boot the TWRP.img
Check what Slot you're on (Reboot Menu)
Go to WIPE, and swipe for “Factory Reset” or ADVANCE (dalvik & data)
Flash the ROM zip followed by TWRP.zip
4. Reboot to system. DO NOT Flash Magisk right away. Boot into the rom once.
Enjoy CarbonROM
Install Instructions - Not Coming from Stock
1. Move ROM + TWRP.zip to your internal storage
2. Boot the TWRP.img
Check what Slot you're on (Reboot Menu)
Go to WIPE, and swipe for “Factory Reset” or ADVANCE (dalvik & data)
Flash the ROM zip followed by TWRP.zip
3. Reboot to system. DO NOT Flash Magisk right away. Boot into the rom once.
Enjoy CarbonROM
Downloads
Unofficial Carbon ROM (walleye) 20180605
Reporting Bugs?
Logcats are needed. I will see what I can do. Do note I am still on the learning curve so fixes will take some time. Do not expect instant fixes.
Donations
Donate to CarbonROM
Remember, every penny you send to them goes right back into the rom. It's used for hardware, server costs, etc - all the things that help them make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
Donate to Me.
All donations will go towards buying a daily driver phone with a decent camera. The Moto E4 just doesn't cut as the Pixel 2 doesn't get much breathing room between rom flashing.
Credits & Thanks
Carbon Team
AquariOS Team
AICP Team
@fhem
@calebcabob
@Myself5
@nitin.chobhe
@MSF Jarvis
And all other open source Devs/Teams who share their work! Thank you for helping me and not getting irritated at my noob questions.
Sources
Rom :- https://github.com/carbonrom
Kernel :- https://github.com/munchycool/android_kernel_google_wahoo
Device :- https://github.com/munchycool/device_google_walleye & https://github.com/munchycool/device_google_wahoo
Vendor :- https://github.com/munchycool/proprietary_vendor_google
XDA : DevDB Information
Unofficial CarbonROM, ROM for the Google Pixel 2 (walleye)
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Alpha
Created 2018-04-26
Last Updated 2018-06-05

Changelog - June 5, 2018
Updated Sources
June 2018 blobs and gapps
FlashKernel inbuilt
Changelog - May 10, 2018
Updated Sources
May 2018 patch
Enabled Smartpixels

First
Thanks for bringing this to all of us bud, will test it out after work!
Beans

Reserved 001.

Great, thanks!
Sent from Pixel 2 Nephilim Rom

What is this TWRP.zip every rom is talking about? Isn't it enough to boot TWRP.img?

redsmith said:
What is this TWRP.zip every rom is talking about? Isn't it enough to boot TWRP.img?
Click to expand...
Click to collapse
yes, if you just want to boot twrp and flash rom zip that would work. if you need twrp installed so you dont have to boot into twrp using a computer every time then you need to flash twrp zip after every rom flash.
if you follow official twrp flashing instructions you will understand what I am trying to say.

I have the ROM up and running. So far so good. Really nice! Thanks for doing a walleye build!

jascolli said:
I have the ROM up and running. So far so good. Really nice! Thanks for doing a walleye build!
Click to expand...
Click to collapse
glad you like it

Nice, glad you kept building.l! Appreciate the share

razrlover said:
Nice, glad you kept building.l! Appreciate the share
Click to expand...
Click to collapse
Enjoy

Thank you very much!
Will test after work
---------- Post added at 08:42 AM ---------- Previous post was at 07:51 AM ----------
Will this ROM ever become official in the near future?

Colday96 said:
[/COLOR]Will this ROM ever become official in the near future?
Click to expand...
Click to collapse
it's built from official sources with help from official developers of various custom rom teams.

munchy_cool said:
it's built from official sources with help from official developers of various custom rom teams.
Click to expand...
Click to collapse
Hey bro,
Data transfer tool restoring Google cloud back up on set up?
Appreciate it

razrlover said:
Hey bro,
Data transfer tool restoring Google cloud back up on set up?
Appreciate it
Click to expand...
Click to collapse
Not sure on that buddy. Never got to test as my Pixel 2 hasn't been setup as daily for a week now. Using my Moto E4 while I learn stuff.

munchy_cool said:
Not sure on that buddy. Never got to test as my Pixel 2 hasn't been setup as daily for a week now. Using my Moto E4 while I learn stuff.
Click to expand...
Click to collapse
Cool man.
@jascolli, can you verify data transfer tool installed,
Did you restore Google account on set up?
Thanks
It anyone else running verify that?

razrlover said:
Cool man.
@jascolli, can you verify data transfer tool installed,
Did you restore Google account on set up?
Thanks
It anyone else running verify that?
Click to expand...
Click to collapse
Data transfer tool did successfully install. I did did not restore though, I did a fresh set up.

jascolli said:
Data transfer tool did successfully install. I did did not restore though, I did a fresh set up.
Click to expand...
Click to collapse
Thanks bro

munchy_cool said:
Not sure on that buddy. Never got to test as my Pixel 2 hasn't been setup as daily for a week now. Using my Moto E4 while I learn stuff.
Click to expand...
Click to collapse
What about custom kernel support? Is it possible to use ElementalX Kernel with your ROM?

xFirefly93 said:
What about custom kernel support? Is it possible to use ElementalX Kernel with your ROM?
Click to expand...
Click to collapse
I think you should be fine. Dont flash root right away though, boot into Android once. In case of any issues a dirty flash should be good.
install rom - boot into android - install kernel - boot into android - install magisk.

[ROM and MICROG][UNOFFICIAL][11.0] Lineage OS 18.1 - Xiaomi A2 Lite

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11/R, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the changelog for a full list of changes & features.
Disclaimer:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What's working:
Boots
RIL
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
Sensors
Flash
LED
GPS
Known issues:
You tell me
Installation:
Download the latest build from here
Download LinkBoi00's version of TWRP here
Reboot to bootloader (adb reboot bootloader)
Fastboot into TWRP recovery (fastboot boot twrp*.img)
Do a factory reset in TWRP
Flash the latest build of Lineage OS
Boot into your new phone
Optional:
Most of us will want the basic functionality like Google Play, Maps and others, therefore I recommend downloading Gapps. You choose your own, but I recommend OpenGapps. They are among the few that can survive OTA updates.
If you do this, I recommend booting into the new LineageOS first, then reboot to recovery, do a factory reset and then only flash the gapps. If you don't do this, the gapps won't install properly
Credits:
Lyceris-chan (most of this is possible due to him)
LinkBoi00
ItsVixano
LineageOS
The wider Android community
Ending words:
This is a follow-up to the Lineage 17.1 ROM that I was working on. You cannot just upgrade from it to this via the system updater, you have to go through the process above. As said before, this is mostly possible due to Lyceris-chan, go support him. If you have any errors or questions feel free to ask in the thread. As for official status, might happen, probably not, I don't have enough time to make the push. As for MicroG, I plan to publish a build too, keep an eye out on xda. If I failed to credit you, make yourself known.
Sources:
Device: https://github.com/a-huk/device_xiaomi_daisy/tree/lineage-18.1
Kernel: https://github.com/Daisy-R-sources/kernel_xiaomi_sleepy
Vendor: https://github.com/a-huk/vendor_xiaomi_daisy/tree/lineage-18.1
Old builds:
If for some reason you need older builds, they can be found here: https://github.com/a-huk/otaserver/releases
Donate:
By no means is it mandatory, I do this because I find it interesting. But it takes a lot of time and also requires me to have a powerful server, so if you could spare some change, I would be grateful.
Donate
MicroG:
If you know what this is, then feel free to install it. This is the same ROM as above, but "debloated" of Google Services that are replaced with open-source alternatives. It mainly works the same, but most daily users will prefer the "normal version". This ROM has its own separate OTA engine, so it should receive updates over it too. You can download it here. The install process is very similar, just don't install Gapps at the end.

Thanks for the rom, is enforcing like lineage 17.1?.

Thanks for this new rom. Great work on the previous one (Lineage 17.1)

Txatxiquesi said:
Thanks for the rom, is enforcing like lineage 17.1?.
Click to expand...
Click to collapse
Not on this version, but next OTA so in like a week or so, it should.

reujea0 said:
Not on this version, but next OTA so in like a week or so, it should.
Click to expand...
Click to collapse
Is enforcing to get more security and asked for a password when start up android? If I update on next OTA, can I get this function without erase all my data?

I get bootloop on first reboot after flashing the ROM. I followed your installation guide.

rootsdroid said:
I get bootloop on first reboot after flashing the ROM. I followed your installation guide.
Click to expand...
Click to collapse
I installed it without any error or bootloop. Are you doing clean install? Is your twrp version new?( I used 3.5.0_9.1.) What was your current rom?

mustaphakosar said:
I installed it without any error or bootloop. Are you doing clean install? Is your twrp version new?( I used 3.5.0_9.1.) What was your current rom?
Click to expand...
Click to collapse
Clean install over previous clean official V11.0.18.0.QDLMIXM.
i used twrp-3.4.0_9-rc6_2-unofficial-daisy.img only to boot into recovery and follow the steps.
Can you help me? Thanks

rootsdroid said:
Clean install over previous clean official V11.0.18.0.QDLMIXM.
i used twrp-3.4.0_9-rc6_2-unofficial-daisy.img only to boot into recovery and follow the steps.
Can you help me? Thanks
Click to expand...
Click to collapse
Maybe you should try this twrp https://forum.xda-developers.com/t/...-twrp-recovery-for-xiaomi-mi-a2-lite.4178901/
After formatting data, wipe everything except sdcard. I put necessary files on sdcard.
And after the step that you install the rom, install twrp installer, too. And before rebooting system, don't forget to change your slot(from reboot menu), and reboot to recovery again. Than i installed gapps and magisk and rebooted system. Everything gone well.

mustaphakosar said:
I installed it without any error or bootloop. Are you doing clean install? Is your twrp version new?( I used 3.5.0_9.1.) What was your current rom?
Click to expand...
Click to collapse
Maybe that was unlucky, but try it again.

rootsdroid said:
Is enforcing to get more security and asked for a password when start up android? If I update on next OTA, can I get this function without erase all my data?
Click to expand...
Click to collapse
No, if you want to encrypt, you will have to wipe your data. But I think that you can do a twrp backup and restore after the encrypting

reujea0 said:
Maybe that was unlucky, but try it again.
Click to expand...
Click to collapse
Sure, always do what the developer says. I just told what i did and what worked for me. But maybe it's just what you said.

mustaphakosar said:
Maybe you should try this twrp https://forum.xda-developers.com/t/...-twrp-recovery-for-xiaomi-mi-a2-lite.4178901/
After formatting data, wipe everything except sdcard. I put necessary files on sdcard.
And after the step that you install the rom, install twrp installer, too. And before rebooting system, don't forget to change your slot(from reboot menu), and reboot to recovery again. Than i installed gapps and magisk and rebooted system. Everything gone well.
Click to expand...
Click to collapse
Thanks friend! Now all is working!

reujea0 said:
No, if you want to encrypt, you will have to wipe your data. But I think that you can do a twrp backup and restore after the encrypting
Click to expand...
Click to collapse
Thanks for the info

reujea0 said:
Maybe that was unlucky, but try it again.
Click to expand...
Click to collapse
I tried twice, but only the @mustaphakosar solution worked for me

rootsdroid said:
I tried twice, but only the @mustaphakosar solution worked for me
Click to expand...
Click to collapse
In fact you had everything required at the beginning. Glad you succeded.

reujea0 said:
No, if you want to encrypt, you will have to wipe your data. But I think that you can do a twrp backup and restore after the encrypting
Click to expand...
Click to collapse
Encryption working ?
Can you send me a screenshot.

Very happy with the new ROM. Good job!

Thanks for providing this new version, I did a clean install today. Everything seems to work fine except the default browser - no matter if I use mobile data or wi-fi, it can't open any page

@reujea0 Thanks for the rom and all your efforts.
Which opengapps package do you recommend ?
And which is the biggest package we could safely flash to avoid twrp' s error 70 ?

[ROM] [12.1] [TREBLE] [UNOFFICIAL] [Gapps/Vanilla] CherishOS V3.9.5 for Nokia 8 [NB1] [DISCONTINUED FOR A13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CherishOS is an AOSP based rom focusing on a Unique UI with many customizations.
Known bugs
- Loudspeaker is loud and creates some echo in calls
- TWRP recovery does not decrypt internal storage with a pin set, this is TWRP's fault, but does not affect OTAs, cancel when prompted for pin it will say its incorrect. [fixed with latest twrp]
- Offline charging animation does not work [FIXED in 3.5.2]
- SIM2 mobile data does not work (for dual sim users) but the sim itself works fine [FIXED in 3.5.2]
- gyro sensor creates a drift in some games [FIXED in 3.6]
- requires flashing atomix zip for WPA2 hotspot to work (attached) < now included, needs test. [no longer required]
- you tell me
Please ensure T-virus-2.0 is installed before attempting to flash this rom! follow this guide here: https://forum.xda-developers.com/t/nokia-8-nb1-full-rom-installation-guide.4349525/
Selinux status: Enforcing
Download
ROM
Release CherishOS 3.9 [12.1] [Gapps/Vanilla] [Unofficial] · megafire91/NB1-CherishOS_Releases
CherishOS for NB1 treble only [T-virus 2.0 required] Changelog: https://t.me/CherishOS/1120 Device changelog: Changed to LOS camera to resolve not saving issues Audio visualiser now working Offlin...
github.com
Recovery
TWRP:
Release TWRP 3.6.2 A12.1 for NB1 · Niemandausduisburg/android_device_nokia_A1N-NB1-TWRP-new
TWRP 3.6.2 A12.1 for Nokia 8 (NB1) Flashable bootimage & flashable zip availible. Known Features xD: - MTP / ADB don't work sometimes. To fix disable & re-enable MTP in Mount-options. - ADB sidelo...
github.com
The Zip installer is used for easier access when flashing roms, the img is there in case you have forgotten to flash the zip and have lost recovery.
Flashing instructions
Clean Flash:
1. Take a full backup of both your data and internal storage as it may be wiped.
2. Download the ROM from above link and flash the recovery zip
3. Download the recovery zip of your choosing and flash it if not already on latest twrp.
4. boot into recovery and either remove rom pin or wipe internal to have it accessible to copy rom zip over (due to the decryption bug) or just use external sd card to flash.
5. flash the rom zip and recovery zip again right after the rom zip before rebooting , it will reboot you to recovery automatically in other slot. (optional) cherish recovery included.
6. Flash any mods you may want
7. run factory reset from recovery, or wipe /data and /dalvik if you don't want internal wiped.
8. reboot to system and enjoy!
(flashing Atomix zip is only needed if you flash the .img to fix hotspot, but not with the zip)
Installing an OTA (Dirty flash):
1. Download the ROM from above link
2. flash the rom zip and recovery zip and let it reboot into recovery.
3. wipe Dalvik cache only
4. flash any mods you had previously flashed.
5. reboot to system and enjoy!
(flashing Atomix zip is only needed if you flash the .img to fix hotspot, but not with the zip)
Device support:
https://t.me/HMD_Nokia_8
Credits
Me for building the rom
@emufan4568 for the NB1 device and vendor tree, atomix kernel and TWRP.
Rany42 for all his help and contribution and for using his device trees, he doesn't have an XDA account.
@oaid for contribution to vendor tree and atomix kernel and countless hours of bug fixing
@CherishOS team for the amazing ROM
@THMSP for T-virus
all users in our telegram groups that helped us contribute and find bugs as well as sent us logs.
if i missed anyone in credits please let me know and ill add you to this list.
coffee:
Pay Marcel Dos Santos using PayPal.Me
Go to paypal.me/marceldossantos91 and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.
paypal.me
if you do decide to donate, thank you, appreciate it more than you know.
Sources:
CherishOS: https://github.com/CherishOS
Device trees: https://github.com/GPUCode, https://github.com/c79

Reserved

in case anyone is wondering, the rom is considered stable and mostly everything works, but please when reporting bugs, attach a log, thanks!

Thanks!!!

build updated
Happy flashing!

In your instructions
I'm guessing step one should be make sure device bootloader Unlocked
And t virus is installed

johndaog said:
In your instructions
I'm guessing step one should be make sure device bootloader Unlocked
And t virus is installed
Click to expand...
Click to collapse
Yes you are correct. Ive updated the post accordingly, however it is always to be assumed any rom besides stock needs T-virus to work as it requires the treble base.

Thanks for making this! Out of curiosity, is this rom using the latest A11 DDV by @emufan4568 you mentioned in another thread?

r100 said:
Thanks for making this! Out of curiosity, is this rom using the latest A11 DDV by @emufan4568 you mentioned in another thread?
Click to expand...
Click to collapse
Yes, its using all the ddv blobs and hal's, and everything has been upgraded. All A12 roms for NB1 going forward will use them

Just flashed this ROM. Buttery smooth. Thanks a lot for your time and efforts.
Couple of possible bugs
1) Do not change the display cut out from default- it blanks the whole screen without any way to change back other than by factory resetting.
2) I can't connect to Internet when I turn on expressvpn. Might be just me though.
This just proves that the Nokia 8 is still a very capable device in 2022.
Can't really get a logcat for the first one but will look into the second one to see if there's a workaround for the VPN issue.

And just in case anyone is wondering, banking apps work just fine. Safetynet passes and Selinux is indeed enforcing

Latest Gcam seems to be a hit and miss for some modes. I'll share if there's a better one out there more suited to the Nokia 8
**Edit: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1434/
This one seems good and stable for me

Xda2022 said:
Just flashed this ROM. Buttery smooth. Thanks a lot for your time and efforts.
Couple of possible bugs
1) Do not change the display cut out from default- it blanks the whole screen without any way to change back other than by factory resetting.
2) I can't connect to Internet when I turn on expressvpn. Might be just me though.
This just proves that the Nokia 8 is still a very capable device in 2022.
Can't really get a logcat for the first one but will look into the second one to see if there's a workaround for the VPN issue.
Click to expand...
Click to collapse
Hi all, found a fix for the VPN not connecting. I found that I had to be on a TCP protocol for it to work. I had issues with a UDP connection. Didn't have this issue on Pie so assume it's to do with this ROM, but nonetheless here's the solution if you've got the same problem.

Xda2022 said:
Hi all, found a fix for the VPN not connecting. I found that I had to be on a TCP protocol for it to work. I had issues with a UDP connection. Didn't have this issue on Pie so assume it's to do with this ROM, but nonetheless here's the solution if you've got the same problem.
Click to expand...
Click to collapse
I just tested UDP now with windscribe and i connected without any issues. Likely the issue is your vpn providers app not fully compatible with A12 yet.

marceldossantos91 said:
I just tested UDP now with windscribe and i connected without any issues. Likely the issue is your vpn providers app not fully compatible with A12 yet.
Click to expand...
Click to collapse
Interesting... I guess it's a fix for anyone on Express VPN.

new cherish build up, QC is finally fixed with this update. happy flashing

marceldossantos91 said:
new cherish build up, QC is finally fixed with this update. happy flashing
Click to expand...
Click to collapse
Probably me being a bit stupid, but how do you update? I don't see an update menu- does this need a microsd card to flash over twrp for every update?

Xda2022 said:
Probably me being a bit stupid, but how do you update? I don't see an update menu- does this need a microsd card to flash over twrp for every update?
Click to expand...
Click to collapse
You have to dirty flash through twrp. I am looking into how i can integrate an OTA updater but for now dirty flash procedure

build is updated, the only change is that the H/W lights for keys should now work.
Happy flashing!

Nice one Marcel!

CherishOS V4.8 [13] [Gapps/Vanilla] [NB1] [Unofficial]

Hello forum, hello developers,
I am very happy that the Nokia 8 still finds support here.
For the work done and providing this great ROM my heartfelt thanks! Everything works wonderful. In my opinion even better than the Anfroid 12 version.
Perfect. I am very happy with it.
Because of this great work, hopefully my Nokia will work well for a while,

Kasi1906 said:
Hello forum, hello developers,
I am very happy that the Nokia 8 still finds support here.
For the work done and providing this great ROM my heartfelt thanks! Everything works wonderful. In my opinion even better than the Anfroid 12 version.
Perfect. I am very happy with it.
Because of this great work, hopefully my Nokia will work well for a while,
Click to expand...
Click to collapse
hey, thank you i am glad you are happy with it, always nice to see things like this, appreciated.

4.2 build is up, happy flashing, changelog in git page

marceldossantos91 said:
4.2 build is up, happy flashing, changelog in git page
Click to expand...
Click to collapse
Thank you for the timely security update! My gratitude is still very high. The ROM works perfectly. So far I have not had any problems.

I have an unlocked bootloader
I don't have twrp
I wish it will be updated
where to begin?
sew up twrp? which version?
infect with a virus through nost?
instructions are not clear

satanvade said:
I have an unlocked bootloader
I don't have twrp
I wish it will be updated
where to begin?
sew up twrp? which version?
infect with a virus through nost?
instructions are not clear
Click to expand...
Click to collapse
Hi, you can follow the guide in the Q & A section linked above or in our telegram support group, but the basic idea is:
Unlock bootloader + critical
Flash Tvirus 2.0, which includes twrp 3.6 already (there is however a 3.7 update available, which supports decryption in A12/13, but 3.6 can flash fine)
Flash the rom
Wipe data
Reboot to system
If you need further support, we are more responsive in our support group

It is a beautifully crafted system. Some issues make it a deal breaker for me though.
1. Pop up about something is wrong contact manufactruer every time you boot up.
2. Android auto will not launch. Car detects phone and phone detects car but nothing will launch.
3. No face unlock

guorium said:
It is a beautifully crafted system. Some issues make it a deal breaker for me though.
1. Pop up about something is wrong contact manufactruer every time you boot up.
2. Android auto will not launch. Car detects phone and phone detects car but nothing will launch.
3. No face unlock
Click to expand...
Click to collapse
Hey.
1. don't worry about this error, it does no harm in any way, we hid it before but sources have patched against our patch, we're trying to find a new way to hide it.
2. are you using Gapps or vanilla version? I will look into this
3. Face unlock is a feature that usually gets added on at some point, it's starting to get added in some A13 roms now, please be patient it will get added

marceldossantos91 said:
Hey.
1. don't worry about this error, it does no harm in any way, we hid it before but sources have patched against our patch, we're trying to find a new way to hide it.
2. are you using Gapps or vanilla version? I will look into this
3. Face unlock is a feature that usually gets added on at some point, it's starting to get added in some A13 roms now, please be patient it will get added
Click to expand...
Click to collapse
I flashed vanilla first then flashed Gapps in one go. Rebooted to CherishOS afterward. Updated android auto app through google play store. I also had this issue with Pexiel Experience A12. It can be hard to test as a car stereo is needed. Thanks!

guorium said:
I flashed vanilla first then flashed Gapps in one go. Rebooted to CherishOS afterward. Updated android auto app through google play store. I also had this issue with Pexiel Experience A12. It can be hard to test as a car stereo is needed. Thanks!
Click to expand...
Click to collapse
Would there be any chance you can post a log? So i can look into it, as i dont have an android auto compatible car to test with, would be most helpful if you could.
Feel free to join our support group & talk to me

marceldossantos91 said:
Would there be any chance you can post a log? So i can look into it, as i dont have an android auto compatible car to test with, would be most helpful if you could.
Feel free to join our support group & talk to me
Click to expand...
Click to collapse
Sadly I don't have a forest around me. Hard to find a log. Jks. I will find log later.

guorium said:
Sadly I don't have a forest around me. Hard to find a log. Jks. I will find log later.
Click to expand...
Click to collapse
thanks

marceldossantos91 said:
thanks
Click to expand...
Click to collapse
Thanks for looking into this. Nokia 8 somehow spams the crap out of the log. Got the log with logcat[NO ROOT] app on wireless debugging mode. The file is very long but I believe the useful bit is at 12-16 01:10:31.019. I roughly plugged it into the car stereo at 12-16 01:10:30. Guess it takes a while for system to detect it.

guorium said:
Thanks for looking into this. Nokia 8 somehow spams the crap out of the log. Got the log with logcat[NO ROOT] app on wireless debugging mode. The file is very long but I believe the useful bit is at 12-16 01:10:31.019. I roughly plugged it into the car stereo at 12-16 01:10:30. Guess it takes a while for system to detect it.
Click to expand...
Click to collapse
thank you for the log i will look into it and see if i can resolve it in updated builds

marceldossantos91 said:
thank you for the log i will look into it and see if i can resolve it in updated builds
Click to expand...
Click to collapse
No problema. PE A12 has the same problema. Must be easy to miss.

4.4 build is up, happy flashing

marceldossantos91 said:
4.4 build is up, happy flashing
Click to expand...
Click to collapse
Thank you!
Enjoy

Kasi1906 said:
Thank you!
Enjoy
Click to expand...
Click to collapse
tysm appreciate it

4.6 build is up, happy flashing!

Develop Bugs

welcome