Develop Bugs

[Guide] From a (soft) Brick to a Marshmallow (Taiwan 6.0.1)

How to fully fix au Japanese HTC Butterfly 3 with Taiwan’s ROM
[ROM verified working in US on all gsm networks and Europe (other networks may place sim lock ie. Middle East, South America)]
**Read over entire guide before starting**
**I am not responsible for any damage done to your phone. (Guide is basically without flaw, but still)**
**It is recommended you leave sim card out until point you stop, turn off phone, insert, then reboot.**
Shout out to mars3712 for uploading the file images check him out and donate:
https://www.androidfilehost.com/?w=profile&uid=24052804347819348
and another shout out to moizjazz for helping me diagnose my problem that many have been experiencing (banner error due to CID and MID[this prevents HTC updates from installing and/or installing zips])
Pre-req.s htc drivers and adb 1.3 drivers
1. Enable adb debugging on phone
2. Download this file and unzip: https://drive.google.com/file/d/0BwjkdhnznIw6THQxdHFIcWUxRms/view?usp=sharing
3. add this zip with it and unzip contents into same directory https://www.androidfilehost.com/?fid=24352994023706379
4. hold shift and then right click blank space in folder and select open command window here
5. Type: adb reboot download
6. Type: fastboot oem get_identifier_token
7. Right click terminal and left click and hold from First "<" to last ">"
8. Press enter, paste into wordpad or text editor
9. Delete all <bootloader> s and space afterwards
10. Log into www.htcdev.com
11. Copy the token to http://www.htcdev.com/bootloader/unlock-instructions/page-2
12. Proceed with instructions until you get the email.
13. Download Unlock_code.bin and put it with all other files (in b3twrp)
14. Type into terminal Fastboot flash unlocktoken Unlockcode.bin
15. You will be prompted to allow unlock, with volume rocker move to yes and press power button
16. During reboot hold all three buttons and when phone shuts off let go of vol+
17. You will be in download mode again
18. Type these commands
a. Fastboot flash boot boot.img
b. Fastboot flash recovery recovery.img
c. Fastboot flash system system.img
d. Fastboot oem writecid HTC__621
e. fastboot oem writemid 0PL220000
[Good time to make twrp backup on SD card]
[You can stop here if you are content with lollipop; skip to bottom for gps fix]
f. fastboot oem lock
19. Reboot and upgrade to marshmallow without dealing with banner errors and RUU
At this point the Tiawan rom has two software malfunctions, no gps and no nfc, however, there is a patch you can flash for gps
Marshmallow update has gps fixed and nfc detected, but unusable.
-video- https://www.youtube.com/watch?v=LEAH...SD4YsS3P4WqrPA
-Straight up link- http://1drv.ms/1nKdi4e
This dude is awesome for having the gps fix, like his video.
P.S. There is now a way to root or add xposed installer to Marshmallow because twrp 3.0 for recovery has been made for this device running marshmallow
[Edit]: Now there is twrp!!!!! (see bottom!!!!)
**I have tested this method twice and confirmed that even with some updated download mode firmware, updates will always be possible**
*This method rocks!*
Also (to end this goose chase), if any of you want the zips for some reason, here are the links to the best servers:
Japan: https://www.androidfilehost.com/?fid=24052804347822774 Credit goes to - Krocko
Taiwan: https://www.androidfilehost.com/?fid=24352994023706373 Credit goes to- mars3712
Big ANNOUNCEMENT! An actual twrp recovery image has been compiled and uploaded!(In china)
Here's my reuploaded copy! (Won't take 10 minutes to download) Thanks to mrquyen1993 for sharing this update and a HUGE thanks to... I actually dont know...
https://drive.google.com/file/d/0B6qqU5WVQ2khMVRMSUhOUWY3WU0/view?usp=sharing
Phone, SMS, and data work perfectly! I had issues with sms due to damaged SIM card(weirdest thing ever).
Hello, I believe a simlock solution has been found. add attached misc.img to your b3 adb directory and open terminal and enter command fastboot flash misc misc.img in bootloader mode. If that doesn't work try it in download mode. I can't test if this is a successful fix or not because I didn't have this problem.

So when I flash this rom, I will get a completely clean rom with no bloatware, root and TWRP?
And if I have root I can use your method to be able to text again?

Twrp is still only flashable to recovery and and all gsm cell service works, but other than that you're correct. These are the stock flashable images. (You need to decompress the file)
Sent from my HTC_B830x using XDA-Developers mobile app

Works like a charm, thanks a lot!

So if I follow your steps, I can convert my Japan version to Taiwan version? Does NFC and GPS work?

Can you post a copy of your updated boot.img somehow?

NP. Srry I Just saw this now.
[deleted]

Half correct
frosticfire said:
So if I follow your steps, I can convert my Japan version to Taiwan version? Does NFC and GPS work?
Click to expand...
Click to collapse
Only gps will work and you have to follow the bottom link. Follow the instructions.txt in the zip.

Sim card problem
My phone keeps showing "SIM network subset unlock PIN" , it reboots after i entered the pin, it goes back to the same page after it reboots. Any solutions?
This only happens when there's a SIM card being inserted.

Troubleshooting
bernard090 said:
My phone keeps showing "SIM network subset unlock PIN" , it reboots after i entered the pin, it goes back to the same page after it reboots. Any solutions?
This only happens when there's a SIM card being inserted.
Click to expand...
Click to collapse
Have you tried:
-soft factory reset(in settings)
-factory reset and/or wiping cache in download mode
-factory reset and/or wiping cache in recovery
-wiping system, data, and cache in twrp prior to flashing boot, recovery, and system
-reverting to backup
-trying simlock toggle in recovery/weird mode with vol+ and power on boot
-Checking sim support/trying different sim
These are steps I would take (in the order least to most in depth[not this order])
Sounds like a problem with your sim card from your specific provider. The phone with Tiawan has an international apn-configs.xml

TWRP for B3 By BOA ai-dev
Tutorial Chinese
TWRP-Recovery Rom taiwan
TWRP-Recovery Rom Japan
Rom stock B3 HTV31 Au ver 1.11.970.0 - new
Boa rom cook pay
After updating Marshmallow , you do not need to fix gps.
Sorry, my english very bad
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bug:
1. NFC.
2. Power.

This is some awesome stuff!
mrquyen1993 said:
TWRP for B3 By BOA ai-dev
Tutorial Chinese
TWRP-Recovery Rom taiwan
TWRP-Recovery Rom Japan
Rom stock B3 HTV31 Au ver 1.11.970.0 - new
Boa rom cook pay
After updating Marshmallow , you do not need to fix gps.
Sorry, my english very bad
Bug:
1. NFC.
2. Power.
Click to expand...
Click to collapse
I'm going to test these files!
[Edit] I have now confirmed twrp works. If you can, please have the creator make a thread in android development!

@ boa19861105
http://forum.xda-developers.com/member.php?u=1580110
Sent from my HTC_B830x using XDA-Developers mobile app

Birkyjon said:
Have you tried:
-soft factory reset(in settings)
-factory reset and/or wiping cache in download mode
-factory reset and/or wiping cache in recovery
-wiping system, data, and cache in twrp prior to flashing boot, recovery, and system
-reverting to backup
-trying simlock toggle in recovery/weird mode with vol+ and power on boot
-Checking sim support/trying different sim
These are steps I would take (in the order least to most in depth[not this order])
Sounds like a problem with your sim card from your specific provider. The phone with Tiawan has an international apn-configs.xml
Click to expand...
Click to collapse
I've tried every single method you have listed but to no avail, any other suggestions?

Butterfly 3 android 6 sense 8
https://m.facebook.com/story.php?story_fbid=1083701208319409&id=241474159208789
Sent from my HTC_B830x using XDA-Developers mobile app

So... will SMS Work?
Hi, the whole reason to do this for me is to get SMS working in the UK on this phone. Will this fix it? Also will this root the phone, as the KLGadget guy on Youtube seems to think that you can flash the Taiwan Rom without Root, but I have had no luck (keeps saying SC CARD NOT MOUNTED when I try his method) thanks.

nickbarr said:
Hi, the whole reason to do this for me is to get SMS working in the UK on this phone. Will this fix it? Also will this root the phone, as the KLGadget guy on Youtube seems to think that you can flash the Taiwan Rom without Root, but I have had no luck (keeps saying SC CARD NOT MOUNTED when I try his method) thanks.
Click to expand...
Click to collapse
you should have a PC, Laptop and follow my instructions.
however I write in Vietnamese, you can use gg translate
Link
Sorry my english very bad

mrquyen1993 said:
you should have a PC, Laptop and follow my instructions.
however I write in Vietnamese, you can use gg translate
Link
Sorry my english very bad
Click to expand...
Click to collapse
Thanks, but I am not sure you have answered my questions.

Rom stock taiwan can fix sms,
I use adb to flash rom, it should not need sd

mrquyen1993 said:
Rom stock taiwan can fix sms,
I use adb to flash rom, it should not need sd
Click to expand...
Click to collapse
thanks. I will follow the original instructions.

Rejoice! Cyanogen OS 13 OTA is out for the Swift

To get it just download the OTA and install it, unless you're rooted, in which case you'll need to install the zip from here. Keep in mind that it takes some time for the update to get on that site, so if it's still not there check back in a day or two

Got OS 13 this morning for my Swift but have issues. At the time the update installed SIM 1 was enabled but SIM 2 was disabled. (i.e.both slots had SIM cards in them but only only card one was enabled). Post update SIM 1 works in either slot but SIM 2 will not work in either slot and cannot be enabled (Swift tells me ther is no SIM in the slot). If both SIMs are physically in place neither works and the phone tells me both slots are empty. Has the update killed SIM2? (Possibly because it was disabeld when the update happened?) I have no other SIM to try populating both slots appart from the non-functioning one.

grahamu said:
Got OS 13 this morning for my Swift but have issues. At the time the update installed SIM 1 was enabled but SIM 2 was disabled. (i.e.both slots had SIM cards in them but only only card one was enabled). Post update SIM 1 works in either slot but SIM 2 will not work in either slot and cannot be enabled (Swift tells me ther is no SIM in the slot). If both SIMs are physically in place neither works and the phone tells me both slots are empty. Has the update killed SIM2? (Possibly because it was disabeld when the update happened?) I have no other SIM to try populating both slots appart from the non-functioning one.
Click to expand...
Click to collapse
Try removing the sims and battery, sometimes my Swift doesn't detect the SIMs aswell

I have the same problem, I have tried the affected sim in a spare phone and it works fine. Also I tried a new sim and both are recognised in the swift so next step factory reset and hope it sorts the problem.

brokebloke said:
I have the same problem, I have tried the affected sim in a spare phone and it works fine. Also I tried a new sim and both are recognised in the swift so next step factory reset and hope it sorts the problem.
Click to expand...
Click to collapse
Please let us know if the reset fixes the problem.

Same issue with mine after update (doesn't detect either SIM - S1 was enabled and S1 disabled before the update) - fingers crossed it'll sort itself out.
Removing and reseating the sims and battery made no difference, fwiw

Apparently a factory reset is the official fix, according to their twitter account:
https://twitter.com/Wileyfox/status/730670536108462080

I don't see many differences with the update but there is still time to see how it will hold up.
One thing I did notice right away is that I can't get the SD card to be used as adopted storage. After the format it remains as corrupted (64GB microSDHC class 10). It doesn't have any problem to be used as portable storage. I should check with one CM13 ROM if the card is the problem or it could be something a clean COS13 install will fix.
Other than that, everything works great. Now on Tap is good, there is no longer "Advanced mode" inside About phone, security update is May 1st. Some minor UI changes here and there. Overall- very good.

I can confirm that a factory reset made the SIMs get detected again.
Now just to get this phone back the way I like it! (sigh!)

Pak0St said:
I don't see many differences with the update but there is still time to see how it will hold up.
One thing I did notice right away is that I can't get the SD card to be used as adopted storage. After the format it remains as corrupted (64GB microSDHC class 10). It doesn't have any problem to be used as portable storage. I should check with one CM13 ROM if the card is the problem or it could be something a clean COS13 install will fix.
Other than that, everything works great. Now on Tap is good, there is no longer "Advanced mode" inside About phone, security update is May 1st. Some minor UI changes here and there. Overall- very good.
Click to expand...
Click to collapse
No Advanced mode! Can you still edit the positions of the onscreen nav buttons ie swap home, back etc?

rebane2001 said:
To get it just download the OTA and install it, unless you're rooted, in which case you'll need to install the zip from here. Keep in mind that it takes some time for the update to get on that site, so if it's still not there check back in a day or two
Click to expand...
Click to collapse
there are 3 images on the cyngn.com/support website.
cm-13.0-ZNH0EAS2NH-crackling-signed-fastboot-2306277a34.zip
cm-13.0-ZNH0EAS2NH-crackling-signed-9c92ed2cde.zip
cm-13.0-ZNH0EAS2NH-crackling-boot-debuggable-dec9fc75ff.img
which one is the correct one for a rooted swift

ts-ascii said:
there are 3 images on the cyngn.com/support website.
cm-13.0-ZNH0EAS2NH-crackling-signed-fastboot-2306277a34.zip
cm-13.0-ZNH0EAS2NH-crackling-signed-9c92ed2cde.zip
cm-13.0-ZNH0EAS2NH-crackling-boot-debuggable-dec9fc75ff.img
which one is the correct one for a rooted swift
Click to expand...
Click to collapse
cm-13.0-ZNH0EAS2NH-crackling-signed-9c92ed2cde.zip did it for me

leetron said:
No Advanced mode! Can you still edit the positions of the onscreen nav buttons ie swap home, back etc?
Click to expand...
Click to collapse
I bet the advanced mode features are still there, swapping navbuttons was available atleast for me

any idea how to get root back without unlocking bootloader again and installing TWRP. I don't want to loose my data thrugh the wipe

my devise is bricked
after update my device briked ..now only working fastboot only ...any one plz help . boot loader also disabled :crying:

@leetron , absolutely! They just removed the extra step there. I believe, now everything is enabled by default.
Shame you can't modify the recent button behaviour with the extra goodies yet.

(first of all sorry about my bad english) any one please help me to recover my phone ...i try some way but i lost recovery mode by pressing volume down & power button but not working .only one flash of wileyfox come and gone. switch on is not working ..same like flashing the screen & gone dark. only working cyanogen fastboot mode by pressing volume up + power button......what i do i am not a tech no guy but a fan of cynogenmod..plz help any one.......

ts-ascii said:
any idea how to get root back without unlocking bootloader again and installing TWRP. I don't want to loose my data thrugh the wipe
Click to expand...
Click to collapse
Your bootloader should still be unlocked, you just need to reinstall TWRP, which doesn't delete your data
akkuvijay said:
after update my device briked ..now only working fastboot only ...any one plz help . boot loader also disabled :crying:
Click to expand...
Click to collapse
Go to fastboot by holding down volume up and plugging in an USB cable and flash a new recovery using these steps (you need fastboot to work on your computer):
1. Download recovery.img from here
2. Open Command Prompt and type in the following:
Code:
fastboot -i 0x2970 erase recovery
3. Then type in
Code:
fastboot -i 0x2970 flash recovery recovery.img
4. Then using fastboot, boot into recovery and using USB file transfer method copy this file to your device
5. Now wipe your device and install the zip
Then your device should work again

rebane2001 said:
Your bootloader should still be unlocked, you just need to reinstall TWRP, which doesn't delete your data
Go to fastboot by holding down volume up and plugging in an USB cable and flash a new recovery using these steps (you need fastboot to work on your computer):
1. Download recovery.img from here
2. Open Command Prompt and type in the following:
Code:
fastboot -i 0x2970 erase recovery
3. Then type in
Code:
fastboot -i 0x2970 flash recovery recovery.img
4. Then using fastboot, boot into recovery and using USB file transfer method copy this file to your device
5. Now wipe your device and install the zip
Then your device should work again
Click to expand...
Click to collapse
sir thanks for replay ... there is an error like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

akkuvijay said:
sir thanks for replay ... there is an error like this
Click to expand...
Click to collapse
You need to install the google usb driver

Help! Sensors turned off!

Hello everyone. I was with Android 7 on my ZS570KL and returned to 6 for a tutorial found on the internet and worked, but all the sensors of the device were disabled (screen rotation, gyroscope, approximation, fingerprint [only registers up to 93% and gives error], and all the others). How do I reactivate? I came back to Android 7, formatted the device several times, and nothing solves!

What tutorial and why?
No information = no help

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I do not remember where I found the tutorial and the files, but the process is this:
1. Download http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZS570KL/UL-Z016-WW-4.12.40.1698-user.zip
2. Download https://mega.nz/#!tp9DSQ4b!3wdDLsh3BBtPju8G74xlDjLJ9QywFaoLs1T11mMt3QQ
3. Unzip FlashTools64_20161125.zip
4. Unzip UL-Z016-WW-4.12.40.1698-user.zip and move out files under firmware-update to FlashTools folder
5. Put downgrade.bat, boot.img, recovery.img to FlashTools folder
6. Reboot phone to bootloader and click downgrade.bat
The reason was to swap the conventional root SU through the Magisk. I tried to reinstall 7 just by replacing the original recovery available here in XDA, but the process was not going to restart, so I followed that one to try to return and reinstall everything. It worked, I got back to 6, but I did not know everything. It looks like a computer without the drivers installed.

I'd downgrade again, if it was me, this time I'd install a stock Rom (MM) from ASUS. Then test everything again. If everything is good to go then I'd root and upgrade.
Changing the OS in the middle doesn't help if you have a problem.
Especially if it just builds upon the foundations of the previous OS...
Did you flash a complete N rom or do an update?

The ROMs I try are exactly those of the Asus site. I tried the downgrade again to version 4.12.40.1698 and realized something when I flash in recovery mode. The following error messages appear:
Unmount of /firmware failed: no such volume
Mount: failed to mount /dev/block/bootdevice/by-name/mdtp at /firmware: No such file or directory
Unmount of /firmware failed, no such volume
What is it? How to solve?

I need the original kernel and recovery of the latest firmware released, can anyone make it available?

AndreSantoro84 said:
I need the original kernel and recovery of the latest firmware released, can anyone make it available?
Click to expand...
Click to collapse
These recovery images are from nenebear59, thanks to him !
Z016-WW-5.14.44.2212_recovery :
For 2.15GHz CPU
For 2.4GHz CPU

Thank you very much! Now I need the "persist.img" file, of the same rom, can you make it available? I thank you!

I downloaded the source code kernel from the Asus site, and the compressed file has a sensor folder. I downloaded the kernel zip file to my memory card and tried to install via recovery, however the following message appears: E: footer is wrong / E: signature verification failed. How do I get install by recovery or via flash in cmd?

I followed this tutorial (https://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061) and managed to recover the fingerprint reader, but the others are still turned off. I really need the correct file! Somebody help me, please!

I got it! I used the persist.img of the global rom of the Xiaomi Mi Mix and the sensors came back! Apparently it's a universal file that caters to any device. You can close the topic!

Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!

equinoks said:
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
Click to expand...
Click to collapse
Really??

Ryder. said:
Really??
Click to expand...
Click to collapse
sorry from nougat to marshmallow

There isn't android lollipop for the asus zenfone 3 series. They came out with marshmallow.

AndreSantoro84 said:
I got it! I used the persist.img of the global rom of the Xiaomi Mi Mix and the sensors came back! Apparently it's a universal file that caters to any device. You can close the topic!
Click to expand...
Click to collapse
HELLO! I'm having a similar issue. 5 times my Zs570kl end up stuck in Asus logo boot screen after being charging all night (with alarming overheating) . I had to wipe the device with factory reset every time to get it working again. Last time, when finally booted up, all sensor were off, and I couldn't make them work no matter how much I try factory reseting again. I think i could try to install the persist.img file you mention, could you help me to find it? Thanks so much in advance for your help.
Asus Z016D (ZS570KL) 2.15 SKU WW_user_5.15.44.2562 build

equinoks said:
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
Click to expand...
Click to collapse
Come on. To downgrade, you need to download the official rom from the Asus website (version WW-4.12.40.1698 - do not forget to check if your device is 2.15 or 2.4 ghz). Downloaded, need to put the rom inside a micro sd card (can not be internal storage, need to be in sd). In addition, it must be with the original recovery (the version is indifferent), if it is in TWRP it will not work. Once you have done this, you will have access to recovery mode, go to the "install zip from sd card" option, locate the zip file of the rom and install it, and just wait. Having problems, report here.

cazadormoron said:
HELLO! I'm having a similar issue. 5 times my Zs570kl end up stuck in Asus logo boot screen after being charging all night (with alarming overheating) . I had to wipe the device with factory reset every time to get it working again. Last time, when finally booted up, all sensor were off, and I couldn't make them work no matter how much I try factory reseting again. I think i could try to install the persist.img file you mention, could you help me to find it? Thanks so much in advance for your help.
Asus Z016D (ZS570KL) 2.15 SKU WW_user_5.15.44.2562 build
Click to expand...
Click to collapse
Hello! To reinstall the sensors is very simple (both work to find out the way, but then it gets simple hahaha). Download the adb files (it is available here in the forum, and inside the folder put the persist.img that I will make available here.) Access the fastboot mode on the device, connect to the computer, and open the command prompt inside the folder. Open the CMD, type the following command line: fastboot flash persist persist.img and press enter. The file will be rewritten and after that the sensors will be reconfigured. Restart the device. Having problems, report here.

Solved!
AndreSantoro84 said:
Hello! To reinstall the sensors is very simple (both work to find out the way, but then it gets simple hahaha). Download the adb files (it is available here in the forum, and inside the folder put the persist.img that I will make available here.) Access the fastboot mode on the device, connect to the computer, and open the command prompt inside the folder. Open the CMD, type the following command line: fastboot flash persist persist.img and press enter. The file will be rewritten and after that the sensors will be reconfigured. Restart the device. Having problems, report here.
Click to expand...
Click to collapse
THANK YOU ANDRE!!! I'm really really happy to tell you that everything worked PERFECTLY. I wasn't sure if I need to unlock the bootloader and flash root first, so I tried to do it. I've been able to unlock the bootloader, but for some reason, when I flash the bootroot.img following the instructions from this post - https://forum.xda-developers.com/ze...v-liftoff-zs570klpro-official-unlock-t3557276 -, I get the asus logo boot loop. Anyway, without the root I flash the persist file and, as you said, all the sensors were reconfigured.
Again, muito muito obrigado!!!

cazadormoron said:
THANK YOU ANDRE!!! I'm really really happy to tell you that everything worked PERFECTLY. I wasn't sure if I need to unlock the bootloader and flash root first, so I tried to do it. I've been able to unlock the bootloader, but for some reason, when I flash the bootroot.img following the instructions from this post - https://forum.xda-developers.com/ze...v-liftoff-zs570klpro-official-unlock-t3557276 -, I get the asus logo boot loop. Anyway, without the root I flash the persist file and, as you said, all the sensors were reconfigured.
Again, muito muito obrigado!!!
Click to expand...
Click to collapse
If you want to root, flash the twrp and then supersu zip from twrp

Question HELP - Realmeflash.exe "cannot find central directory"

Hello everyone !
I am French and my English is very bad so I will use Google translation to communicate with you!
This is what is happening.
Without doing it on purpose, I flashed the original boot with the unofficial TWRP one!
Since then, I can no longer use my phone and I no longer enter the RUI3 interface.
I used Realmeflash.exe to reinstall the firmware and it gives me an error message "cannot find central directory".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you know how to solve this problem?
Thank you for your help !

I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you

kamubendi said:
I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you
Click to expand...
Click to collapse
Thank you very much friend

@kamubendi
I posted the problem on this page too !
https://c.realme.com/in/post-details/1525231625514856448
If it can help for the future

I share the extraction of the firmware : RMX3363GDPR_12_C.06_2022042721590000
https://drive.google.com/drive/folders/1QpeyOBuavwC3gq25jfKnNaXqmVBMAwt-?usp=sharing

use this flash tool. put the ofp file in same folder run exe & select region start flash https://github.com/italorecife/OppoRealme-OFP-Flash

urstrulynaveen said:
use this flash tool. put the ofp file in same folder run exe & select region start flash https://github.com/italorecife/OppoRealme-OFP-Flash
Click to expand...
Click to collapse
I already tried !
According to Google the .exe is infected with a virus, but I used it anyway, because I know it can be a false positive.
During use, the flash does a lot of "Success" but also "Failed", because of data protection on certain files!
Arrived at "service.img", the flash stops and nothing advances!

I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot
fastboot getvar current-slot
fastboot --set-active=a or b
fastboot reboot

urstrulynaveen said:
I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot
fastboot getvar current-slot
fastboot --set-active=a or b
fastboot reboot
Click to expand...
Click to collapse
I choose slot A to do the flashing and then I have to activate slot B ?

Yup after flashing success

urstrulynaveen said:
Yup after flashing success
Click to expand...
Click to collapse
Hi, I got my phone back from this scam repairman!
He damaged my phone even more than I left him!
Could you send me a screenshot of your c:\adb\dir please!
I no longer have recovery mode and the repairman told me a lot of things that I supposedly did during the flashing to get rid of his bull****!!
Thank you.

@urstrulynaveen Otherwise I tried what you told me and I got this!

ToutanVrac said:
@urstrulynaveen Otherwise I tried what you told me and I got this!
View attachment 5618219
Click to expand...
Click to collapse
Ur already in slot a change it to b. Firmware may flashed in slot b

urstrulynaveen said:
Ur already in slot a change it to b. Firmware may flashed in slot b
Click to expand...
Click to collapse
I already did, I have this command line that appears instead !
When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !
In general, I have 50% success and 50% failed !
The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.

ToutanVrac said:
I already did, I have this command line that appears instead !
View attachment 5618873
When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !
View attachment 5618879
In general, I have 50% success and 50% failed !
The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.
Click to expand...
Click to collapse
Every partition flashes in both slots except super partition. Super partition only flashes in inactive slot, that's why u need to change the slot. Super partition flashing takes around 25 to 30 minutes you need to be patient. & After flashing check slot and change it

urstrulynaveen
Thank you very much for helping me, it motivates me not to give up !
Did you receive a lot of failed during flashing ?

@urstrulynaveen
Problem solved...everything works! !
I'm in the interface and everything seems fine at the moment.
The flashing problem was what you said for the "super" file, but the main problem was above all the fact that I wasn't using a USB port on the motherboard !
Were you able to root the phone ?

ToutanVrac said:
@urstrulynaveen
Problem solved...everything works! !
I'm in the interface and everything seems fine at the moment.
The flashing problem was what you said for the "super" file, but the main problem was above all the fact that I wasn't using a USB port on the motherboard !
Were you able to root the phone ?
Click to expand...
Click to collapse
Can you explain to me how to do it with pictures and writing and I will be very thankful to you

nighetspy said:
Can you explain to me how to do it with pictures and writing and I will be very thankful to you
Click to expand...
Click to collapse
It's very easy !
1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options
The files will install one by one and you may get a lot of errors!
Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new !

ToutanVrac said:
It's very easy !
1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options
The files will install one by one and you may get a lot of errors!
Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new !
Click to expand...
Click to collapse
Finally, after two weeks of trouble, the problem was solved, thank you very much

Question Red Warning and UnWorking Lockscreen. HELP

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, dear owners of this beautiful device.
After an unsuccessful attempt to get root, such a warning appeared, plus the ability to lock the screen disappeared. As a result, I didn't get root either and problems arose)
Could you show the instructions how to fix everything step by step and get root? Thanks)

Hey, so I have the same problem as you. I was installing the patched boot.img file when I rebooted, but there was no magsik app. After I tried to flash the same file again, except I put in some vbmeta file because some website said so, now my phone's files are corrupted. I got into fastboot mode and put through recovery mode, and did a data wipe and one final reboot, but even that did work because it said my phone is corrupt. The last thing I will try is to install TWRP, remove the old data, and install the update to restore the previous ROM files. I'll let you know if anything works. Just try ur methods and let me know if they worked. Sure is an expensive paperweight if it doesn't work...

redmgicUSER8 said:
Hey, so I have the same problem as you. I was installing the patched boot.img file when I rebooted, but there was no magsik app. After I tried to flash the same file again, except I put in some vbmeta file because some website said so, now my phone's files are corrupted. I got into fastboot mode and put through recovery mode, and did a data wipe and one final reboot, but even that did work because it said my phone is corrupt. The last thing I will try is to install TWRP, remove the old data, and install the update to restore the previous ROM files. I'll let you know if anything works. Just try ur methods and let me know if they worked. Sure is an expensive paperweight if it doesn't work...
Click to expand...
Click to collapse
did anything happen?

Stusick said:
Did anything happen?
Click to expand...
Click to collapse
Nothing yet... I'm trying to contact the support team. They can only do so much remotely

i have this error also what should i do?
the phone not boot up
the red warning are stuck

yakir150 said:
i have this error also what should i do?
the phone not boot up
the red warning are stuck
Click to expand...
Click to collapse
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot

[email protected] said:
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
Click to expand...
Click to collapse
okay i try it and still no luck the same problem

yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
Download global V3.19 rom from: https://rom.download.nubia.com/Europe&Asia/NX729J/V319/NX729J.zip
Download QPST and QFIL flash tool from: https://www.mediafire.com/file/220h5xaxi1gd55m/QPST_2.7.496.zip/file. Install the driver (provided in the download) and these two programs.
You could then flash this rom V3.19 using QFIL flash tool. If you can flash this rom successfully your phone will work.

[email protected] said:
Download global V3.19 rom from: https://rom.download.nubia.com/Europe&Asia/NX729J/V319/NX729J.zip
Download QPST and QFIL flash tool from: https://www.mediafire.com/file/220h5xaxi1gd55m/QPST_2.7.496.zip/file. Install the driver (provided in the download) and these two programs.
You could then flash this rom V3.19 using QFIL flash tool. If you can flash this rom successfully your phone will work.
Click to expand...
Click to collapse
my phone is eu and using 4.18
can i use 3.19?
it's ok?

yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
For QFIL, use Flat Build and in the configuration use ufs. Good luck!

yakir150 said:
my phone is eu and using 4.18
can i use 3.19?
it's ok?
Click to expand...
Click to collapse
Your version V4.18 will be replaced by V3.19. This V3.19 version can be flashed through edl mode. I could not find V4.18 in this format. The two roms are very similar. They are both global roms.

[email protected] said:
Your version V4.18 will be replaced by V3.19. This V3.19 version can be flashed through edl mode. I could not find V4.18 in this format. The two roms are very similar. They are both global roms.
Click to expand...
Click to collapse
okay i will try and let you know
thank you very much

yakir150 said:
okay i try it and still no luck the same problem
Click to expand...
Click to collapse
If QFIL does not work, you need to do side load the rom multiple times again then it might work!

turn off the red rm8 notification (Your device is broken. It is unreliable and may not work)
- enter command on PC: adb reboot "dm-verity enforcing"
- on phone for rooted device with termux: reboot "dm-verity enforcing"

izsdeaman said:
turn off the red rm8 notification (Your device is broken. It is unreliable and may not work)
- enter command on PC: adb reboot "dm-verity enforcing"
- on phone for rooted device with termux: reboot "dm-verity enforcing"
Click to expand...
Click to collapse
The command on PC shows "Too many arguments." The Termux one works. Thanks!

[email protected] said:
Your boot loader must be unlock
Reboot to recovery, choose English when you see "Wipe data" type
adb reboot sideload
Once your phone boots into sideload mode (When you see the two error line at the bottom of the screen) type
adb sideload NX729J-update.zip
When the transfer is successful ( with a transfer of 2.0 display) you can wipe the data twice with the first and second options and reboot the phone. If you are lucky, the phone will boot
Click to expand...
Click to collapse
Tahnk you very very very much.