Develop Bugs

Cannot connect to a 802.1x EAP wifi network

Hi. i am using the latest Cynageon mod RC5 release rom and i am trying to connect to a 802.1x EAP security wifi connection here at work that uses PEAP method and i am unable to authenticate and connect to this wireless network.
Any suggestions?
it works on an android device running older then 3.0 as i checked on my HTC desire. It also works fine on my ipad and ipod touch devices.
I have also tried a Galaxy note that runs standard touchwizard Rom with no rooting and i even tried a Nexus 4 and all do not work

jonneymendoza said:
Hi. i am using the latest Cynageon mod RC5 release rom and i am trying to connect to a 802.1x EAP security wifi connection here at work that uses PEAP method and i am unable to authenticate and connect to this wireless network.
Any suggestions?
it works on an android device running older then 3.0 as i checked on my HTC desire. It also works fine on my ipad and ipod touch devices.
I have also tried a Galaxy note that runs standard touchwizard Rom with no rooting and i even tried a Nexus 4 and all do not work
Click to expand...
Click to collapse
wrong forum but try to turn off router and turn on again...if won't work it's because of CM RC5

One-X-master said:
wrong forum but try to turn off router and turn on again...if won't work it's because of CM RC5
Click to expand...
Click to collapse
It is a work router so cant simply access and tweak it at work place.
Also, i cant connect using other roms and devices

I had a similar problem and a router reset sorted it.

jonneymendoza said:
It is a work router so cant simply access and tweak it at work place.
Also, i cant connect using other roms and devices
Click to expand...
Click to collapse
if you can't restart the router then sorry you can't do anything against it .... unless you restart it nothing could work for getting a connection

One-X-master said:
if you can't restart the router then sorry you can't do anything against it .... unless you restart it nothing could work for getting a connection
Click to expand...
Click to collapse
How come ipads, ipods and older 2.3 android devices work?

jonneymendoza said:
How come ipads, ipods and older 2.3 android devices work?
Click to expand...
Click to collapse
don't know...can u send me a picture of your WiFi settings?

One-X-master said:
don't know...can u send me a picture of your WiFi settings?
Click to expand...
Click to collapse
I will try and send later but what info are u after?

jonneymendoza said:
I will try and send later but what info are u after?
Click to expand...
Click to collapse
If u enabled 5g WiFi or not....if not its due to router so you should reset it...just restarting....if not use mobile network
Gesendet von meinem HTC One X mit Tapatalk 2

jonneymendoza said:
How come ipads, ipods and older 2.3 android devices work?
Click to expand...
Click to collapse
Yes youre correct my HOX with 4.1.1 and Tablet with CM 10.1 cannot enter the network because they will see the security as WPA. But you can install an app called advanced wifi config. Just edit another access point and rename it to your work wifi name. And then edit the security as 802.1x, PEAP, your domain, username, etc. And then use your luck so that your phone will connect to the wifi automatically because you cannt do it manual
Sent from my HTC One X using xda app-developers app

frequent wifi disconnect

i get frequent wifi disconnects .dmsg says "deauth frame received reson code 7" if i set pinging to a address it works fine..any help pls.

i
Lasantha said:
i get frequent wifi disconnects .dmsg says "deauth frame received reson code 7" if i set pinging to a address it works fine..any help pls.
Click to expand...
Click to collapse
unselect poor wifi signal from wifi advance setting.
OR
repair ur firmware by PCC
both of them If ur wifi router s working fine...
:good:

Sadly nothing worked router good as HTC s and laptops work fine
Sent from my D5503 using Tapatalk

Tab Pro 8.4 connects to wifi on 2.4 and not 5, any way to get it to use 5?

I have a Netgear Knighthawk router and the main network is one name that utilizes both 2.4 and 5 and as long as the connecting device supports it, it should connect on that band.
My Nexus 5 and wife's S4 which are right next to my Tab are connected on the 5 band.
Any ideas on how I can force the Tab Pro to connect mm on 5?
Thanks

I can't remember in detail but I had mine connected to 5ghz but switched to 2.4 a while back.
If your tab can't see the network or is having a prob connecting to it, then enable broadcast if its disabled
Sent from my SM-T320 using Tapatalk

Try changing the 5GHz channel your router is using.
Sent from my M80TA using Tapatalk

cloud71 said:
I can't remember in detail but I had mine connected to 5ghz but switched to 2.4 a while back.
If your tab can't see the network or is having a prob connecting to it, then enable broadcast if its disabled
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
My network only has one name but it is both 2.4 & 5 so when I connect its only one option.
dodo99x said:
Try changing the 5GHz channel your router is using.
Sent from my M80TA using Tapatalk
Click to expand...
Click to collapse
I will try this, I have been messing with the channels for the 2.4 but forgot to do that with 5.
Thanks

If your using both 2.4 and 5 at same time, that might be your problem. Change the name of one of them. Xxxx5. Or something
Sent from my SM-T320 using Tapatalk

cloud71 said:
If your using both 2.4 and 5 at same time, that might be your problem. Change the name of one of them. Xxxx5. Or something
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
I would really like to keep it as one network, I have had it like this since I set it up and have had zero issues. All AC devices connect to 5 and N to 2.4, this is the first time it may be an issue but my wife's S4 connects to 5 with no issues currently.

Raistlin1 said:
I have a Netgear Knighthawk router and the main network is one name that utilizes both 2.4 and 5 and as long as the connecting device supports it, it should connect on that band.
My Nexus 5 and wife's S4 which are right next to my Tab are connected on the 5 band.
Any ideas on how I can force the Tab Pro to connect mm on 5?
Thanks
Click to expand...
Click to collapse
It seems your tab pro might be defective and not able to connect to 802.11ac, it can only connect to 802.11n which on your routher is running on 2.4GHz.

I had an issue with wifi one, for some reason it wasn't connecting right after some investigations. I enabled ssid broadcast and it worked again. I'm figuri g it was the rom being glitchy.
So try enabling broadcast if its disabled and see it that works
Sent from my SM-T320 using Tapatalk

silvscorp said:
It seems your tab pro might be defective and not able to connect to 802.11ac, it can only connect to 802.11n which on your routher is running on 2.4GHz.
Click to expand...
Click to collapse
Tested out my Tab by connecting to my guest 5ghz network and tab connected fine. My router let's you combine the main network 2.4 and 5 into one name but guest network must be two separate names for the 2.4 and 5.
cloud71 said:
I had an issue with wifi one, for some reason it wasn't connecting right after some investigations. I enabled ssid broadcast and it worked again. I'm figuri g it was the rom being glitchy.
So try enabling broadcast if its disabled and see it that works
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
ssid broadcast was already enabled

Raistlin1 said:
Tested out my Tab by connecting to my guest 5ghz network and tab connected fine. My router let's you combine the main network 2.4 and 5 into one name but guest network must be two separate names for the 2.4 and 5.
Click to expand...
Click to collapse
Are you sure that your guest network 5Ghz is running with 802.11ac and not A/N mode?

There are some incompatibility with tab pro and some routers.
I'm using tp-link wdr4600, 2.4ghz and 5ghz works fine. A friend, using different router, has the same problem as you, and sometimes the connection drops.

Raistlin1 said:
I have a Netgear Knighthawk router and the main network is one name that utilizes both 2.4 and 5 and as long as the connecting device supports it, it should connect on that band.
My Nexus 5 and wife's S4 which are right next to my Tab are connected on the 5 band.
Any ideas on how I can force the Tab Pro to connect mm on 5?
Thanks
Click to expand...
Click to collapse
Have you loaded a ROM other than USA? I'll look for the link, or search for posts by me, but i had a similar problem with an S4, and it turned out to be some countries outside US use different frequencies that keep it from connecting at 5ghz. Just needed to change a couple of settings in some files and all was good, or load a USA ROM.
Sent from my SM-T320 using Tapatalk

I haven't loaded any ROMS, running stock version that came with Tab from my US Best Buy purchase and I also did the OTA update.
I haven't checked if my Tab is running on N or AC when connected to my guest 5ghz network, I will have to check that soon. I will also need to find someone who has an AC network and a different router so I can test it out there, but I have a feeling this may be a little difficult for me to do.
Edit: So I checked my router and the 5GHz guest network is automatically set for a/n/ac and there is no option to change it. When viewing my Tab on the connected devices screen I cannot tell if it's connected as n or ac, how can I find this out? Any way to find this out via the Tab?

Raistlin1 said:
I haven't loaded any ROMS, running stock version that came with Tab from my US Best Buy purchase and I also did the OTA update.
I haven't checked if my Tab is running on N or AC when connected to my guest 5ghz network, I will have to check that soon. I will also need to find someone who has an AC network and a different router so I can test it out there, but I have a feeling this may be a little difficult for me to do.
Edit: So I checked my router and the 5GHz guest network is automatically set for a/n/ac and there is no option to change it. When viewing my Tab on the connected devices screen I cannot tell if it's connected as n or ac, how can I find this out? Any way to find this out via the Tab?
Click to expand...
Click to collapse
you can get a app called "network signal info" and install on your tab and other phones. in the app it can tell you what frequency you are connected at.

silvscorp said:
you can get a app called "network signal info" and install on your tab and other phones. in the app it can tell you what frequency you are connected at.
Click to expand...
Click to collapse
Tried that app out but all I could see on the statistics was that I was connected to the 5.something Ghz band, this was while I was on my guest 5Ghz specific wifi. I did not see anything about being "N" or "AC". Maybe I am not fully understanding this, but I thought AC was always in the 5Ghz band, is that not correct?

Wifi+Bluetooth Simultaneously

So I've had my Tab S 8.4 for about a month and I've noticed that Wifi and Bluetooth don't play nice together. If I have wifi on andthen turn on Bluetooth, the wifi just disconnects from the network and says it can't find any networks.
Is there any possible fix for this or have I gotten a dodgy device? I've looked around the net and tried changing my wifi channel to no avail. Some article said something about 2.4GHz vs 5GHz and only using 5GHz for wifi but I think my router's too old for that.

Roukie said:
So I've had my Tab S 8.4 for about a month and I've noticed that Wifi and Bluetooth don't play nice together. If I have wifi on andthen turn on Bluetooth, the wifi just disconnects from the network and says it can't find any networks.
Is there any possible fix for this or have I gotten a dodgy device? I've looked around the net and tried changing my wifi channel to no avail. Some article said something about 2.4GHz vs 5GHz and only using 5GHz for wifi but I think my router's too old for that.
Click to expand...
Click to collapse
Have you used Sidesync? Disable that (or clear app data and cache) and try again. Worked for me.

You're a legend man!

Roukie said:
You're a legend man!
Click to expand...
Click to collapse
Maybe he is who wrote the solution first, not me

Wifi Prob with D-Link Router

I have D-Link DIR-605L (802.11n) router at home and everything was working fine. Suddenly since past few days, my N3N is not getting connected to wifi router properly. I have to disable and enable wifi on phone 4-5 times atleast and then it connects automatically. On the same router other android, iphone and windoes phones and laptops connects properly to same router.
I thought there is prob with my phone, but the same phone works properly in office. It connects and works with no issues on office wifi.
I have already tried below mentioned troubleshooting steps
- factory reset router and phone both
- tried various security settings (WEP, WPA, WPA2 etc)
- upgrading os on phone and router both
- enable 802.11g mode, mix mode etc.
What could be issue? and any way we can fix this.

arinjayw said:
I have D-Link DIR-605L (802.11n) router at home and everything was working fine. Suddenly since past few days, my N3N is not getting connected to wifi router properly. I have to disable and enable wifi on phone 4-5 times atleast and then it connects automatically. On the same router other android, iphone and windoes phones and laptops connects properly to same router.
I thought there is prob with my phone, but the same phone works properly in office. It connects and works with no issues on office wifi.
I have already tried below mentioned troubleshooting steps
- factory reset router and phone both
- tried various security settings (WEP, WPA, WPA2 etc)
- upgrading os on phone and router both
- enable 802.11g mode, mix mode etc.
What could be issue? and any way we can fix this.
Click to expand...
Click to collapse
Any help team pls?

Try changing wifi connection security to WEP or WPA etc
Sent from my SM-N750 using XDA Free mobile app

Evil Eye said:
Try changing wifi connection security to WEP or WPA etc
Sent from my SM-N750 using XDA Free mobile app
Click to expand...
Click to collapse
I have tried all. Even without any security settings i face this issue.
My phone was with Samsung service center for 4 days and they said there is no WiFi issue at all. They are able to connect to other DLink routers with no issues. I also got my Dlink router checked, and all other devices are able to connect to my Wifi router with no issue... ant understand what could be the issue

Wow.. that's kinda strange..
Sent from my SM-N750 using XDA Free mobile app

Yes it is.. am last one month i have been trying many things.... its just all so weird .....

i am also hving same prblm with my note 3 neo..did u get any soln for it? if yes then do let me know.