hello, for anyone who has Mi 9 SE Global Version (EEA), can you help me?
Can you make clean back up file because I need stock ROM file but there isnt any official link to download that
i want go back from Xiaomi.eu ROM to Stock.
Thank you
Update: other forum says Mi 9 SE update have arrived. Can anyone give me the Ota link? Or upload the Ota file for me?
hugeota.d.miui.com/V10.2.11.0.PFBCNXM/miui_GRUS_V10.2.11.0.PFBCNXM_a2557d7524_9.0.zip
morgs640 said:
hugeota.d.miui.com/V10.2.11.0.PFBCNXM/miui_GRUS_V10.2.11.0.PFBCNXM_a2557d7524_9.0.zip
Click to expand...
Click to collapse
This rom Is China. CN =China EU=Europa.
My bad I was half asleep at the time obviously. Can you not use this to go back to Xiaomi.eu rom still?
morgs640 said:
My bad I was half asleep at the time obviously. Can you not use this to go back to Xiaomi.eu rom still?
Click to expand...
Click to collapse
Thank you for your response. But what I want is go back to the stock global rom. I'm trying to find global rom download link, but no results.
Delete
Related
I want to flash the miui pro rom on my whyred.....but on their website the installation instructions has a truck load of steps including flashing official rom through Miflash,then flashing dummy.img etc.
My question is do I need to follow all the steps as I already using a custom rom?
Thanks in advance
No one could help???that's disappointing.....
I was running beta global MIUI 10 and bricked my device trying to flash MIUI pro. Be careful!
coco1476 said:
I was running beta global MIUI 10 and bricked my device trying to flash MIUI pro. Be careful!
Click to expand...
Click to collapse
Thank you so much for replying......I'll be careful.......
himu995 said:
I want to flash the miui pro rom on my whyred.....but on their website the installation instructions has a truck load of steps including flashing official rom through Miflash,then flashing dummy.img etc.
My question is do I need to follow all the steps as I already using a custom rom?
Thanks in advance
Click to expand...
Click to collapse
i downloaded latest global HM 9.6.5 GLOBAL CHINA STABLE RECOVERY ROM (1.65GB) and flashed it with Twrp...
DONE
DON"T flash older roms! , the anti rolback is activated, you will brick your device for good!
if you not sure and afraid to brick just delete "firmware-update" folder from the miuipro zip file. then you are ready to flash , no mather which firmware you are .
YasuHamed said:
i downloaded latest global HM 9.6.5 GLOBAL CHINA STABLE RECOVERY ROM (1.65GB) and flashed it with Twrp...
DONE
DON"T flash older roms! , the anti rolback is activated, you will brick your device for good!
Click to expand...
Click to collapse
Maybe I flashed an older rom which is why I bricked my device. Do you have a link to that rom, I can't find it
I will search and send u
YasuHamed said:
I will search and send u
Click to expand...
Click to collapse
Perfect thanks
You should be fine as long as you dont flash older miui versions. You can flash miui pro, but the fwless (removed arb) versions. You can find them on a seperate site not from miuipro official site. Miuipro(.)net
coco1476 said:
Perfect thanks
Click to expand...
Click to collapse
http://en.miui.com/download-342.html#508
only download http://bigota.d.miui.com/V9.6.4.0.O...ProGlobal_V9.6.4.0.OEIMIFD_44e6a174cf_8.1.zip
awerqw22 said:
You should be fine as long as you dont flash older miui versions. You can flash miui pro, but the fwless (removed arb) versions. You can find them on a seperate site not from miuipro official site. Miuipro(.)net
Click to expand...
Click to collapse
can u please give me the link?that would be a big help.
Flash Xiaomi.eu rom instead, it's better and easy to install.
Dear all,
Greetings,
I wonder if I can install the Indian rom provided on the eu.miui.com to my chinese version of Redmi 6 pro .. Chinese is bloating the phone and I can't use the phone like this. I am aware of eu xiaomi roms but i'm looking for official builds provided by xiaomi itself.
Thanks
Yes you can install it . No problem:good:
RaghavTeck said:
Yes you can install it . No problem:good:
Click to expand...
Click to collapse
Hlw....u said no prblm.but some guys in miui forum,they told cant install indian rom on chinese version Redmi 6 pro. Which one i'll trust??
Sorry for bad english.TIA
Yes, the phone hardware is same and you can install miui indian ROM safely but also remember that it is always safe to stay on stock country ROM.
Also if you return to indian ROM, you will not get miui 10 update
:good:
RaghavTeck said:
Yes, the phone hardware is same and you can install miui indian ROM safely but also remember that it is always safe to stay on stock country ROM.
Also if you return to indian ROM, you will not get miui 10 update
:good:
Click to expand...
Click to collapse
you ? % sure about it? thx
99.9% sure Cause if YOU wrongly flash it , please don't point at me and i will help
Someone has succeeded in this operation?
Someone has succeeded in this operation?
mohawahba said:
Dear all,
Greetings,
I wonder if I can install the Indian rom provided on the eu.miui.com to my chinese version of Redmi 6 pro .. Chinese is bloating the phone and I can't use the phone like this. I am aware of eu xiaomi roms but i'm looking for official builds provided by xiaomi itself.
Thanks
Click to expand...
Click to collapse
I'll prefer Indian rom over the Chinese one.. Cause it constantly freezes while using.. And yes its safe as LNG as you know what you are doing.. Let is know when you do it..
sandz66 said:
I'll prefer Indian rom over the Chinese one.. Cause it constantly freezes while using.. And yes its safe as LNG as you know what you are doing.. Let is know when you do it..
Click to expand...
Click to collapse
thanks for your response. what is LNG?
and have you tried it? is there any chance to brick the phone bcz of ANTI ROLLBACK?
mohawahba said:
thanks for your response. what is LNG?
and have you tried it? is there any chance to brick the phone bcz of ANTI ROLLBACK?
Click to expand...
Click to collapse
Hello, did you try to flash India ROM to your chinese phone?
Were you successful?
Thank you!
alx000 said:
hello, did you try to flash india rom to your chinese phone?
Were you successful?
Thank you!
Click to expand...
Click to collapse
nope i sold it
alx000 said:
Hello, did you try to flash India ROM to your chinese phone?
Were you successful?
Thank you!
Click to expand...
Click to collapse
I've bought R6pro CN version with Indian global
Miui installed.
Now when I check my product name
fastboot getvar product
It says - sacura_ India
I must unlock bootloader if I want to get OTA update. Without unlocked bootloader I would brick my phone.
I think that you can install Indian rom only if you unlock bootloader.
mohawahba said:
Dear all,
Greetings,
I wonder if I can install the Indian rom provided on the eu.miui.com to my chinese version of Redmi 6 pro .. Chinese is bloating the phone and I can't use the phone like this. I am aware of eu xiaomi roms but i'm looking for official builds provided by xiaomi itself.
Thanks
Click to expand...
Click to collapse
Please can I see the about and baseband of your phone because my own baseband started with .TA and I heard it is a fake ROM and installing any update will brick it.
alx000 said:
Hello, did you try to flash India ROM to your chinese phone?
Were you successful?
Thank you!
Click to expand...
Click to collapse
Yes I flash it indian ROM on cn ROM succesfully
---------- Post added at 05:33 PM ---------- Previous post was at 05:28 PM ----------
Rana0007 said:
Hlw....u said no prblm.but some guys in miui forum,they told cant install indian rom on chinese version Redmi 6 pro. Which one i'll trust??
Sorry for bad english.TIA
Click to expand...
Click to collapse
Indian ROM can easily install on cn ROM. But advantage go to cn ROM , they get latest update first
Hi everyone,
I have a Mix 3 Global, unlocked with custom TWRP, rooted and happy with EU rom,
but I unsuccessfully tried to revert to Global stock rom .zip from TWRP with error
Someone has a solution?
Thanks in advance
stefano alegnini said:
Hi everyone,
I have a Mix 3 Global, unlocked with custom TWRP, rooted and happy with EU rom,
but I unsuccessfully tried to revert to Global stock rom .zip from TWRP with error
Someone has a solution?
Thanks in advance
Click to expand...
Click to collapse
Did you format data in twrp? You need to do this to remove encryption when going between Chinese and global otherwise it won't boot.
If you can find the global firmware files you can use miflash
Mackay53 said:
Did you format data in twrp? You need to do this to remove encryption when going between Chinese and global otherwise it won't boot.
If you can find the global firmware files you can use miflash
Click to expand...
Click to collapse
Yes I formatted data in TWRP, but nothing... during install global.zip it stops with error.
I can't use MIflash tool because there is no Global fastboot rom
stefano alegnini said:
Yes I formatted data in TWRP, but nothing... during install global.zip it stops with error.
I can't use MIflash tool because there is no Global fastboot rom
Click to expand...
Click to collapse
What's the error?
I don't remember, I'm happy now with EU rom
stefano alegnini said:
I don't remember, I'm happy now with EU rom
Click to expand...
Click to collapse
Do you think it's better than the global? I am on global locked and unrooted but I am considering EU rom. I hope in better notifications and Gcam compatability
Sent from my Mi MIX 3 using Tapatalk
Galeanatur said:
Do you think it's better than the global? I am on global locked and unrooted but I am considering EU rom. I hope in better notifications and Gcam compatability
Click to expand...
Click to collapse
You'll get working notifications and Gcam, rest is the same
Mackay53 said:
You'll get working notifications and Gcam, rest is the same
Click to expand...
Click to collapse
I'm trying since 2 days.. I hope in a better battery life!!!
The EU rom has more options in the system preferences
10.3.7.0
https://bigota.d.miui.com/V10.3.7.0...0.PFQEUXM_20190814.0000.00_9.0_d75b3ef45d.tgz
New links will be posted here.
Thanks!
Where did you gain access to it?
Also my phone already has build V10.3.8.0, is it available to download?
Does any one have ota eea link?
Whats mean EEA rom ?
I guess its european rom
nn
[GS] said:
Whats mean EEA rom ?
Click to expand...
Click to collapse
.
It's not Android 10, It's PIE, but maybe with new security patch.
hi guys need to return to stock here, can I do that with this? have tried with mi flash tool and says finished but never changes from "flashing" status and reboot normal just drops back to fastboot mode. Any tips be welcome - thanks!
technotika said:
hi guys need to return to stock here, can I do that with this? have tried with mi flash tool and says finished but never changes from "flashing" status and reboot normal just drops back to fastboot mode. Any tips be welcome - thanks!
Click to expand...
Click to collapse
Searxh for this thread :[ROM][OFFICIAL][FASTBOOT]Xiaomi Mi A3 (laurel_sprout)
PS: im in phone and i can't send link
[GS said:
;80492669]Searxh for this thread :[ROM][OFFICIAL][FASTBOOT]Xiaomi Mi A3 (laurel_sprout)
PS: im in phone and i can't send link
Click to expand...
Click to collapse
Thanks for that, managed to get it sorted eventually ?
i just broke my Asus Rog 2 wondering if i buy CN Version if i can flash Global rom like we could with ASUS ROG 2... or anyone with phone should i skip and buy ASUS ROG 3 which is coming out shortly.
I understand NFC not in CN Version
hashcheck said:
i just broke my Asus Rog 2 wondering if i buy CN Version if i can flash Global rom like we could with ASUS ROG 2... or anyone with phone should i skip and buy ASUS ROG 3 which is coming out shortly.
I understand NFC not in CN Version
Click to expand...
Click to collapse
yes！
johnny886 said:
yes！
Click to expand...
Click to collapse
So just download latest update and put in root of storage?
As with ROG2 had to change vendor fingerprint via root first just want to check i can flash straight to Global with out all the bricking that is happening. aso do you find it a good build quality?
hashcheck said:
So just download latest update and put in root of storage?
As with ROG2 had to change vendor fingerprint via root first just want to check i can flash straight to Global with out all the bricking that is happening. aso do you find it a good build quality?
Click to expand...
Click to collapse
https://forum.xda-developers.com/nu.../unbrick-tool-nubia-red-magic-5gmade-t4127957
I have a Chinese Device.
I just downloaded the Global ROM and installed via system update.
All working well.
samussamus1 said:
I have a Chinese Device.
I just downloaded the Global ROM and installed via system update.
All working well.
Click to expand...
Click to collapse
Hello samus,
where do I download the Global Rom?
Thanks in Advance!
samussamus1 said:
I have a Chinese Device.
I just downloaded the Global ROM and installed via system update.
All working well.
Click to expand...
Click to collapse
Are you sure its so simple? Did you unlock bootloader?
tott2003 said:
Are you sure its so simple? Did you unlock bootloader?
Click to expand...
Click to collapse
Hi Tott
Yes it really is this simple, I'll share the latest link for 4.13 below.
Be warned: The download speed is very slow today as this is a brand new release and everyone is downloading at once.
http://rom.download.nubia.com/Europe/NX659J/V413/NX659J-update.zip
Also, no, bootloader does NOT have to be unlocked.
-
Sam
samussamus1 said:
Hi Tott
Yes it really is this simple, I'll share the latest link for 4.13 below.
Be warned: The download speed is very slow today as this is a brand new release and everyone is downloading at once.
http://rom.download.nubia.com/Europe/NX659J/V413/NX659J-update.zip
Also, no, bootloader does NOT have to be unlocked.
-
Sam
Click to expand...
Click to collapse
Hi Sir Sam,
Is there any special technique for me to successfully flash Global ROM in my RM5G CN ROM? Tried this version as well but I'm stuck in 25% and an error message keeps popping up saying that the installation was aborted (something like that). Is there any setting I have to turn on or off for this to work?
I'm currently on CNCommon_v6.23
TIA
cavjr08 said:
Hi Sir Sam,
Is there any special technique for me to successfully flash Global ROM in my RM5G CN ROM? Tried this version as well but I'm stuck in 25% and an error message keeps popping up saying that the installation was aborted (something like that). Is there any setting I have to turn on or off for this to work?
I'm currently on CNCommon_v6.23
TIA
Click to expand...
Click to collapse
The reason its failing is because you have a later version of the rom already.
6.23 is more up to date than 4.13
If you wish to change to a lower rom you would need to flash via the recovery menu.
If it still fails, you can use the fastboot bypass method to install TWRP and flash from there instead.
If you use the bypass method you dont unlock you bootloader. And flashing the official rom via twrp will overwrite twrp after a successful flash. Making it stock once more.
Patrick Morgan said:
The reason its failing is because you have a later version of the rom already.
6.23 is more up to date than 4.13
If you wish to change to a lower rom you would need to flash via the recovery menu.
If it still fails, you can use the fastboot bypass method to install TWRP and flash from there instead.
If you use the bypass method you dont unlock you bootloader. And flashing the official rom via twrp will overwrite twrp after a successful flash. Making it stock once more.
Click to expand...
Click to collapse
Thanks for the information Sir, I was able to flash the NON-EU v.3.12 via UnbrickTool from Sir @JerryLin last night, and now I feel very blessed! :laugh:
Thanks!
hashcheck said:
i just broke my Asus Rog 2 wondering if i buy CN Version if i can flash Global rom like we could with ASUS ROG 2... or anyone with phone should i skip and buy ASUS ROG 3 which is coming out shortly.
I understand NFC not in CN Version
Click to expand...
Click to collapse
Why u discuss Rog 2 in this section, this is for Radmagic 5G
Go to Rog 2 questions and answer and ASK tks!