Related
First of all, I have no idea where should this be posted as I am a total noobie to this forum and there is way too many categories.
I have a big problem. I installed Framaroot, used the first option (Boromir?) and have rooted my phone successfully. I tried to use *#*#supersu#*#* but nothing came up, the digits just disappeared, so I installed SuperSU from the market. I didn't do much on it, just changed the theme and hid it from my apps. I were rooted and happy for about a month, then however I got angered by SuperSU because I had to restart Hex Editor every time to get the root permissions (I were editing Terraria save files). The anger made me want to uninstall SuperSU, hoping it would just grant all the perms to the editor. First of all I disabled SuperSU, and when I realised it actually disabled the whole root, I enabled it again (unsure if it worked), I assumed everything is working, but I still wanted to get rid of the permission thing, so I pressed something like 'clean up to switch to a different superuser', and restarted my phone. I come back, and I have no root, so I went into Framaroot and used all the options, each returning that SuperSU and superuser binaries were installed. I restarted my phone, grabbed SuperSU from the Play store, just to find out that 'SuperSU binaries were not installed and SuperSU cannot install them, this is a problem!'. I then went on Framaroot, uninstalled root with all 3 options, restarted, then installed all, restarded, and the problem is still occuring. I am running Android Jelly Bean on Alcatel 4030X.
I have completely no PC access, so any USB roots or things like that are a no go. Please help!
Hi
since no-one has replied it may be because you have no paragraphs so it shows a disorganised mind....giggles
#########
Since you claim you used framaroot to install we now try to get root again
system settings security enable unknown sources
install framaroot ....if you lost it....to sdcard
install it
run it
choose first root exploit as you say that worked
if success you must reboot
###########
What you need to do if you have chainfire's superuser installed next time
go to app drawer
click on the red and yellow su icon
click on settings
change the default from .....ask each time to grant
reboot phone to test permission for apps is now auto granted. Especially test Hex Editor
###########
Altho you don't ask....there are 2 ways of updating chainfire's app
playstore ....click on update for app
open it
it will give you a dialog box to update
choose normal............it attempts to autoupdate
b) install a custom recovery and choose TWRP or CWM or CTR etc and try to update thru custom recovery
good luck
I have rooted my Mi Max with original MI OS and most of the applications can run with root access but my important application that can change the font was not passed the root permission and as well as adblock application.
I did run with root checker application and it shows that my phone has proper root access but when I applied the font changer application and got error that no root access. I have used latest superSU and busybox, I have no idea to fix up and I have tried to google it but can not find it.
Please let me know if you got experience with that, thanks in advance.
It's been a while since I last rooted my 7t. Current oos 10.3.6. Magisk manager v8.0.3. Magisk was 20.4 I think.
So fetch rewards app detected root. I went to add the app to the magisk hide, cleared fetch rewards storage and still root was detected. Tried to run the rename option in the magisk settings but it appears to hang during the process. Phone screen timed out and when I get back into it, the hide magisk manager status pop up was still there. Rebooted the phone, went back to magisk manager. While magisk manager shows it's still installed, magisk is not. Safety net checks still passed.
To reinstall magisk, I need to get the patched oos image, correct?
Thanks
Hi
Think from the magisk manager app you would just install to inactive slot and reboot?
Refer to the Magisk root for 7T thread for patched boot image and instructions.
When I installed a root checker, it showed that I'm still rooted.
All this started when I used the Magisk function to repackage magisk's file name in an attempt to hide it from Fetch Rewards.
noodlenoggan said:
When I installed a root checker, it showed that I'm still rooted.
All this started when I used the Magisk function to repackage magisk's file name in an attempt to hide it from Fetch Rewards.
Click to expand...
Click to collapse
Ok I don't know what I'm missing but I can't seem to find that fetch rewards app in my play store to install and test at my end. Second, Magisk isn't installed according to you manager screenshot... So I'm at a loss. But their are threads better able to assist your efforts to have Magisk root up and running first cause I not knowledgeable enough to state why your root check detects root yet the manager does not indicate root installed.
But I'll hopefully be of more help and provide you this:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
So I'll copy and paste from the link above:
HOW TO UPDATE a ROM and KEEP ROOT:
Before all Disable all magisk modules
Be sure to use Canary Magisk Manager and Canary Magisk (debug)
You can update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
So from thier I'd assume you need only the following:
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
But I am unsure so please verify b4 attempting.
Or may be someone else can confirm here?
Good luck and please consider letting me know how you made out. Thanks
I jumped on the xda magisk support forum and was able to sort out the whole mess I was in.
The android app is called Fetch - Receipts Scanner by Fetch Rewards. It's in Google store.
Hopefully for anyone else that is in the same situation will find their solution as I did below.
What I learned from the Magisk forum and closer examination of my phone were:
- Magisk and Magisk Manager are two separate components. Magisk handles the root and Magisk Manager handles additional root related features. Magisk Manager is not required to have a rooted phone continued to be rooted. I was not aware of this.
- When the repackaging routine was started, Magisk Manager did indeed repackaged and installed itself. There was not indication that the process completed successfully as the spinning progress icon did not stop. I had renamed it MagMan as part of the repackaging routing and was expecting the original icon Magisk icon to show for MagMan. Sorry, I had not read the Magisk Manager instructions and simply made a lot of assumptions of the repackaged process. What happened was that I assumed Magisk Manager would just switch over the new name as part of the repackaging routine. Also I didn't pay close enough attention that the new repackaged app, MagMan, which was literally next to Magisk Manager mainly because it had a generic Android icon instead of the Magisk Manager icon and was overlooked. This whole entire time, I was focusing on the original Magisk Manager app and icon but all of the functionality of Magisk Manager now resided in MagMan. I've uninstalled the original Magisk Manager app and now use the repackaged version.
The Fetch Rewards app was added to the Magisk Hide section via MagMan and it's now working properly.
Thanks for following up.
noodlenoggan said:
Thanks
Click to expand...
Click to collapse
Sweet - glad you have success. Enjoy
I just did more or less the same thing... Hid Magisk manager... Forgot... Flashed full update no prob... Installed new Magisk Manager (along with the previously hidden install of Magisk manager).
Then finally figured out to uninstall the hidden Magisk manager... Then, Magisk manager and was able to install Magisk Root. All good now lol. Glad your up and running.
This worked for me yesterday, but make sure to reboot the phone after doing the "hide magisk" option in Magisk Manager settings. The name also does not have to be "MagMan" it can be anything of your choice.
I also noticed that the proxy app (with blank icon) might not open but if it fails to open just force close it and try again, that seemed to make it open for me.
noodlenoggan said:
I jumped on the xda magisk support forum and was able to sort out the whole mess I was in.
The android app is called Fetch - Receipts Scanner by Fetch Rewards. It's in Google store.
Hopefully for anyone else that is in the same situation will find their solution as I did below.
What I learned from the Magisk forum and closer examination of my phone were:
- Magisk and Magisk Manager are two separate components. Magisk handles the root and Magisk Manager handles additional root related features. Magisk Manager is not required to have a rooted phone continued to be rooted. I was not aware of this.
- When the repackaging routine was started, Magisk Manager did indeed repackaged and installed itself. There was not indication that the process completed successfully as the spinning progress icon did not stop. I had renamed it MagMan as part of the repackaging routing and was expecting the original icon Magisk icon to show for MagMan. Sorry, I had not read the Magisk Manager instructions and simply made a lot of assumptions of the repackaged process. What happened was that I assumed Magisk Manager would just switch over the new name as part of the repackaging routine. Also I didn't pay close enough attention that the new repackaged app, MagMan, which was literally next to Magisk Manager mainly because it had a generic Android icon instead of the Magisk Manager icon and was overlooked. This whole entire time, I was focusing on the original Magisk Manager app and icon but all of the functionality of Magisk Manager now resided in MagMan. I've uninstalled the original Magisk Manager app and now use the repackaged version.
The Fetch Rewards app was added to the Magisk Hide section via MagMan and it's now working properly.
Thanks for following up.
Click to expand...
Click to collapse
This worked for me yesterday on Android 9 (OP5T), but make sure to reboot the phone after doing the "hide magisk" option in Magisk Manager settings. The name of the proxy app also does not have to be "MagMan" it can be anything of your choice.
I also noticed that sometimes the proxy app didn't open and if this occurred I just force closed it and then it seemed to work. Anyways good luck hope it works for someone else
How to root and pass SafetyNet on Sony Xperia 10 III (XQ-BT52)Tested on firmware 62.0.A.3.163.
Disclaimer:
This guide assumes you're familiar with the concepts of rooting, Magisk, SafetyNet, fastboot, adb and so on. I will explain why things are done but if I explained everything it would become too long.
This guide is limited to getting root and apps working on the stock Sony ROM. It doesn't cover installing other ROMs.
You can mess up your phone if you don't know what you're doing. This is not a beginner's guide.
Before you do anything else, do these preparations:
Make sure your device is updated to the latest firmware. Getting updates after you unlock the bootloader will be more complicated.
Use XperiFirm to grab a copy of your current firmware (after you've updated it). It can run on Linux too, either via Mono or in a virtual machine. It's basically just a downloader, it doesn't need any fancy hardware access.
Screenshot everything under Settings > System.
Open the dialer and enter *#*#7378423#*#*. Screenshot everything in the service submenus.
Unlock developer options (tap Settings > About > Build number 7 times) then find it under Settings > System > Advanced. Activate USB debugging. Activate OEM unlocking.
Install the Android SDK Platform Tools. On Linux they're most likely in a package provided by your distro.
Copy the screenshots to your PC because the phone will be reset at some point.
Boot into fastboot by turning the phone off, then connect it to PC via USB, and press POWER and VOLUME UP together. The phone led will turn blue. On PC run fastboot devices and make sure it lists your phone and has the serial number you got from the service menu.
Unlocking the bootloader:
This is the point of no return as far as warranty is concerned!
This will factory reset the phone! Make sure you got everything you needed off it.
Obtain the unlock code (you will need the IMEI of the 1st SIM slot).
Boot into fastboot, check again that fastboot devices lists the phone.
Issue the unlock command using the code you got earlier: fastboot oem unlock 0x<unlock code here>
Reboot the phone (you can say fastboot reboot). It will say "can't check for corruption" and "erasing" a couple of times but will eventually boot up to the factory setup.
Enabling Magisk & root:
Download the latest Magisk apk to the phone and install it. Right now that means v24+.
Open boot_X-FLASH-ALL-8A63.sin from the original firmware with any archive manager (it's a tar.xz), 7zip will work fine.
Extract boot.000, rename it to boot.img and put it on the phone.
Open the Magisk app, next to "Magisk" tap "install", choose "Select and patch a file", pick the "boot.img" file.
Download the patched img to PC (will be next to boot.img called something like magisk_patched-24100_MKPRJ.img).
Boot into fastboot, check again that fastboot devices lists the phone.
Flash the patched boot image: fastboot flash boot magisk_patched-24100_MKPRJ.img
Must say OKAY. Can then reboot the phone (you can say fastboot reboot).
Open the Magisk app again, it should say "installed" now next to "Magisk". Also the Superuser and Modules buttons should now be enabled.
Go into Magisk settings and activate "Hide the Magisk app". This is NOT MagiskHide, it does not hide Magisk from other apps, it hides the Magisk Manager app from other apps. More on this later.
Go into Magisk settings and activate Zygisk. This is a built-in replacement for Riru going forward.
Reboot!
Install a root checker app and verify that you get a prompt from Magisk to give root and that the checker says it got root.
Important changes about Magisk:
Riru is now obsolete. It has been replaced by a feature built-into Magisk called Zygisk (which is essentially Riru running in Zygote). It is strongly recommended to go into Magisk settings and activate Zygisk (even if you don't use Riru modules). Do not install Riru anymore. All modules that needed Riru should have Zygisk versions by now unless they're abandoned.
Magisk no longer maintains a module repository, To find and install modules install Fox's Magisk Module Manager. It's a dedicated module management app that supports the old Magisk repo as well as new ones. Inside Magisk you can still enable/disable/remove/install manually and can also update if the module has an update URL, so you can do without Fox if you get your modules directly from their XDA or GitHub pages.
MagiskHide has been replaced by a new feature called Deny list (it's in Magisk settings). It's much more powerful because the apps & processes added to the deny list will be completely excluded from anything based on Magisk so it's impossible for them to detect leaks anymore. On the downside, excluded apps can't be affected by any Magisk or LSPosed modules (LSPosed will grey out such apps and say "it's on the deny list".) This feature should be used sparingly (see below) because Magisk still does a good job of evading detection.
Passing SafetyNet:
Install YASNAC to check your SafetyNet status. At this point you're probably not passing either Basic or CTS check.
Go into Magisk settings. Enable "Enforce deny list". Enter "Configure deny list", find Google Services, check it, expand it, and select only the process ending in .gms and the one ending in .gms.unstable.
Reboot. Check YASNAC. At this point you should be passing Basic check but probably not CTS.
Install Universal SafetyNet Fix (aka USNF) by kdrag0n in Magisk. (Some GIS ROMs already include what this module does, so if you install a GIS ROM you may not need it.) This module hijacks the CTS verification and drops an error which causes the Google service to fall back to Basic verification, which we already fixed in the previous step.
Reboot. Check YASNAC. At this point you should be passing both Basic and CTS. That's it!
You may need to clear storage & cache for Google Play & Services. Go to Settings > Apps & notifications > See all apps, select "All apps", find them in the list, clear storage/cache and reboot. After that try searching for a restricted app such as Netflix on the Play store, if it shows up in results you're all good.
Remember to also add to deny list other apps that try to detect if you're using root, like banking apps.
Other SafetyNet related fixes:
People using non-stock GIS ROMs will probably need module MagiskHide Props Config by Didgeridoohan. This will install a props command line util that you can use (as root) to force Basic attestation, apply extra Magisk hiding techniques, spoof device fingerprint, change the way fingerprinting is checked, or even impersonate another device altogether. Install, reboot, enter adb shell, type su to go root (will need to grant root to shell on the phone when prompted), then run props and follow the options.
People running extra-stubborn banking apps (or other apps that try to detect root extra-hard) that don't work even when added to the Magisk deny list can try module Shamiko by LSPosed. This module adds extra hiding techniques for the apps on the deny list. Please note that Shamiko will disable the Magisk "enforce deny list" option but that's ok, that's an extra feature, the deny list is in effect even without it.
Working apps and modulesPlease note that this list is limited to stuff that I personally use. I can't and won't install other stuff to test it.
Root apps:
AFWall(+): Works, but configure it to use its own internal busybox and iptables. Applying rules fails occasionally and you need to retry.
Call Recorder by skvalex: Recording works out of the box, no fiddling required with either headset of mic recording.
JuiceSSH, Termux etc. and other terminal apps: No issues getting root with su.
Busybox: you can install zgfg's module which exposes Magisk's internal Busybox to the rest of the system (bonus: will be updated with Magisk); or you can install osm0sys's module which contains a standalone separate Busybox. As of now both of them provide Busybox 1.34.
MyBackup Pro: Works fine. Used it to transfer 15k+ SMS messages from Android 8.
Solid Explorer: Can access root partitions without issues.
Tasker: No issues.
Titanium Backup: Works but will hang when restoring APKs whose target API doesn't support the ROM's Android version (ie. APKs you can't install directly either).
OAndBackupX: Modern alternative to Titanium, works perfectly.
XPERI+: Version 6 works well and allows you to remap the assistant button and has another couple of features. Version 7 crashes.
Magisk modules:
AFWall Boot AntiLeak
Backup
Builtin BusyBox
Magisk Bootloop Protector
MagiskHide Props Config
Shamiko
SQLite for ARM aarch64 devices
Systemless Hosts (comes with Magisk, enable it in settings)
Universal SafetyNet Fix
Zygisk LSPosed
LSPosed modules:
App Settings Reborn: Works well. May require a couple of reboots before the targeted apps start showing the modifications.
Disable Flag Secure: com.varuns2002 is working, sort of. Please read the module's page. Apps got wise to rooted devices ignoring FLAG_SECURE so now they use hardware DRM or detect screenshots and show you something else (Netflix). So it works only in older versions of apps, or apps that haven't bothered to detect screenshots.
GravityBox [R]: Everything I tried works perfectly.
Physical Button Master Control: The module works as intended, the companion config app has some issues, hopefully they'll be solved soon.
XPrivacyLua: Works perfectly. No issues with SafetyNet.
Not working:
...
Other tested and working Root Apps:
AdAway
Fox's Magisk Module Manager
Franco Kernel Manager
Termux
Not testet yet:
Call Recorder
FolderSync
Total Commander
Vanced Manager
WireGuard
Other tested and working Magisk modules:
1Controller - 1 Module to support all Controllers
Call Recorder - SKVALEX
F-Droid Privileged Extension
Move Certificates (version by Androidacy)
Other tested and working LSPosed modules:
BubbleUPnP AudioCast
Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5EEA 13.0.3Global 13.0.1Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.
Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.
Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!
Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.
thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks
Can i update ota to 13.0.2 after rooted? Just update and root again?
Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2
How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?
thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.
vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img
kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet