Related
When I finish restore my back up, I reboot my phone and it get brick (JUGG 5.0)!!! I cannot even press any button to turn the screen on!! Already try with different charger, battery and sim card also!! Does someone have any idea please!!
Try the long power button press. Press the power button and hold it for like 10 seconds (Maybe more, it always feels more then 10 seconds). The phone should vibrate 3 times and then you release.
If that doesn't work, then see if you can get into download mode and get Odin to recognize your phone.
I already try, I press it nearly 1 minute, but the screen doesn't turn on!
what exactly are you doing? you were making a backup in cwm, it finished and then you rebooted?
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
gunbreak said:
I flash a new Rom, but I don't like it. So I use Darkside Superwipe to wipe all cache and data of that Rom so that I can do the back up. After the back up process is finished,(I see everything runs well). I reboot the phone and it gets brick.
Click to expand...
Click to collapse
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
xcrazydx said:
I am not quite understanding. You made backup, or did you restore a backup that you previously made? Anyways, If the phone wont boot try to put in in dl mode and odin it back to stock.
Click to expand...
Click to collapse
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
gunbreak said:
Oh I understand u, I restore my back up. How can I put it in the mode that you say? I can't even turn the screen on can you please help me!
Click to expand...
Click to collapse
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
xcrazydx said:
Before you try to odin it, can you get into cwm by holding the volume up, down, and power. Release power when first samsung logo appears. stay holding vol buttons until cwm pops up. can you get into this?
Click to expand...
Click to collapse
No, it doesn't work. All the buttons freeze now
You most likely are hard bricked, but you still have a slight chance to get into download mode. Not sure how you managed a brick by restoring a backup, but I'll try to help.
Ok, you are going to need the drivers for your phone. http://www.mediafire.com/file/6onrjbyd46j4lhj/T-Mobile_t989_GSII_ADB_Drivers.zip
You need odin as well, download it. http://www.mediafire.com/?u868rqz4qn0ta34
These links were provided by KonstantinKeller
Go here http://www.sammobile.com/firmware/ and make an account. I use sammobile because it contains everything in one shot. No need to get radio and crap from other places. After you make an account go to firmware section and type t989 in the search box. download the t989uvkid. ASSUMING YOU HAVE AMERICAN T989
After you have completed the download you are going to need to unzip it with 7zip to extract the tar.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
Press Volume UP and start ODIN (Run as Admin on Vista and 7, just to be safe)
Click PDA and locate the MD5 file you extracted earlier.
WAIT FOR ODIN TO RECOGNIZE YOUR PHONE. THE COM PORT WILL TURN YELLOW AND HAVE A NUMBER
MAKE SURE NOTHING BUT AUTO REBOOT IS CHECKED!!!!!!!
Press 'Start' and be patient. It will take a few minutes because it is a large file.
phone will reboot automatically.
If you can't get the phone to be recognized try different usb ports or a different computer if you have another. This may not work at all, considering it sounds like you are hard bricked. Good luck!
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
gunbreak said:
I should download T989UVKID or T989UVKL1? I think my phone get android 2.3.6
Click to expand...
Click to collapse
it won't matter. if you want the newest grab kL1
Window told me "no driver found" after I already installed the samsung driver!
gunbreak said:
Window told me "no driver found" after I already installed the samsung driver!
Click to expand...
Click to collapse
Delete that driver setup and use kies. http://www.samsung.com/us/kies/
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
gunbreak said:
I think it already died, no driver found again. I try in device manager, it appears as Samsung Android ADB interface, but nothing appears on my screen it's such a hard brick....
Click to expand...
Click to collapse
Just do this and see if it goes into DL mode.
Plug the USB cable into your computer, without plugging it into your phone.
Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding buttons when the ''Warning'' appears.
If not, you have 2 options
Send to this guy for jtag repair for $50 http://mobiletechvideos.mybigcommerce.com/
OR warranty it through samsung
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
gunbreak said:
I should warranty it through Samsung or ask for replacement phone through Tmobile? (I have insurance in my plan). I wonder if Tmobile find out my phone is rooted and I have to pay for the replacement phone. Do you have any idea?
Click to expand...
Click to collapse
You can go to the tmobile store and tell them it wont turn on. you wont need your insurance plan, the phone carries a warranty against defects for 1 year. Just play dumb and say it wont turn on and demand a new phone.
Do u have any idea if Tmobile check the phone or not?
gunbreak said:
Do u have any idea if Tmobile check the phone or not?
Click to expand...
Click to collapse
They can't tell anything if it's hard bricked. You're fine man, Get a new one.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
USB seems disconnected during loading system to note 8 n5110 and as a result, it stocks at "Firmware upgrade encourtered an issue. Please select recovery mode in Kies and try again". It showed no response to power key and home key. Is there any hope to reload the boot and related files to the device again for unbrick and how? Thanks a lot.
dlwei said:
USB seems disconnected during loading system to note 8 n5110 and as a result, it stocks at "Firmware upgrade encourtered an issue. Please select recovery mode in Kies and try again". It showed no response to power key and home key. Is there any hope to reload the boot and related files to the device again for unbrick and how? Thanks a lot.
Click to expand...
Click to collapse
So are you able to power the device on and off currently? Are you able to get into download mode?
CCallahan said:
So are you able to power the device on and off currently? Are you able to get into download mode?
Click to expand...
Click to collapse
I cannot power on and off the device. I can get into download mode, but odin cannot find the device in this mode.
dlwei said:
I cannot power on and off the device. I can get into download mode, but odin cannot find the device in this mode.
Click to expand...
Click to collapse
Just curious but how are you turning it on? Physically connecting the battery?
Make sure you have the Samsung device driver installed on the PC. Also might try it on another PC if you have that option and see if Odin can connect to device.
If Odin will not work might try using Heimdall: http://forum.xda-developers.com/showthread.php?t=755265
CCallahan said:
Just curious but how are you turning it on? Physically connecting the battery?
Make sure you have the Samsung device driver installed on the PC. Also might try it on another PC if you have that option and see if Odin can connect to device.
If Odin will not work might try using Heimdall: http://forum.xda-developers.com/showthread.php?t=755265
Click to expand...
Click to collapse
As I said, I cannot turn it on or off. It is on when it has power. Yes, you are right, the battery is solided on the device, so I cannot take the battery off.
I have samsung decive driver installed on my PC. Without going into download mode, the PC and Odin at least can find the device, although PC only recognized it as a moderm.
dlwei said:
As I said, I cannot turn it on or off. It is on when it has power. Yes, you are right, the battery is solided on the device, so I cannot take the battery off.
I have samsung decive driver installed on my PC. Without going into download mode, the PC and Odin at least can find the device, although PC only recognized it as a moderm.
Click to expand...
Click to collapse
Might try Heimdall and see if you have any luck with that. Link is in my previous post. Otherwise, not sure what you can do besides taking the tablet in for repair.
**Gave you your first "Thanks" just to get you started. **
CCallahan said:
Might try Heimdall and see if you have any luck with that. Link is in my previous post. Otherwise, not sure what you can do besides taking the tablet in for repair.
**Gave you your first "Thanks" just to get you started. **
Click to expand...
Click to collapse
It finally works using another PC. :highfive::highfive::highfive::highfive::highfive::highfive::highfive:
I'm facing the same issue , how did u get into download mode
Download Mode
Verymalignant said:
I'm facing the same issue , how did u get into download mode
Click to expand...
Click to collapse
First, Tablet needs to be switched off. Then, press "Power" and "Volume Down" buttons together. Once the screen lightens, release the buttons and follow the instructions on the screen.
In case you need to go to recovery mode, press "Power" and "Volume Up" buttons together (also the tablet must be switched off first).
I bricked mine trying to go back to stock rom ?
hello friends. i flashed tethered cyanogen mod 11 with bumped twrp recovery. dont know what happened. the installation was smooth. however after i wished to flash another custom rom i couldnt get into recovery. it gave me oot sector verify secure boot error. i tried download mode to flash stock with lg flash tool 2014. but it is also not detecting the device in any com41.. adv is detecte but nothing else. i researched and could make it that i accidentaly deleted my "laf" partition. so i need a link to any guide of how to restore that.
thanks all. but in need of help :crying::crying::crying::crying:
[email protected] said:
hello friends. i flashed tethered cyanogen mod 11 with bumped twrp recovery. dont know what happened. the installation was smooth. however after i wished to flash another custom rom i couldnt get into recovery. it gave me oot sector verify secure boot error. i tried download mode to flash stock with lg flash tool 2014. but it is also not detecting the device in any com41.. adv is detecte but nothing else. i researched and could make it that i accidentaly deleted my "laf" partition. so i need a link to any guide of how to restore that.
thanks all. but in need of help :crying::crying::crying::crying:
Click to expand...
Click to collapse
I think you flashed the boot.img instead of just booting it. have you tried doing the button thing to get into recovery
powerdown(pull out battery)
press and hold volume- and power untill you see the lg logo, then release and press and hold volume- and power, then chose yes and yes(with volume+, volume - and the power button) and you should be in twrp
Yeah tried the button combo. But instead of twrp or factory reset it gives boot certification error. Secure boot verify.
same thing what did you do to fix this??
[email protected] said:
Yeah tried the button combo. But instead of twrp or factory reset it gives boot certification error. Secure boot verify.
Click to expand...
Click to collapse
markslo112 said:
same thing what did you do to fix this??
Click to expand...
Click to collapse
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
suljo94 said:
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
Click to expand...
Click to collapse
can't do neither of that, if i try download mode the phone shows the same error and turns off. The PC recognizes the phone as "Qualcomm HS-USB QDLoader 9008(COM5). The screen on the phone however is turned off.
markslo112 said:
can't do neither of that, if i try download mode the phone shows the same error and turns off. The PC recognizes the phone as "Qualcomm HS-USB QDLoader 9008(COM5). The screen on the phone however is turned off.
Click to expand...
Click to collapse
you are screwed because you need to send it in(not really fixable)
suljo94 said:
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
Click to expand...
Click to collapse
suljo94 said:
you are screwed because you need to send it in(not really fixable)
Click to expand...
Click to collapse
Yeah I know...I will send it in tomorrow, but I doubt they will repair it for free because I messed with it and they will probably see I did something I shouldn't do to the phone. What should I say when I turn it in? Probably best if I say I tried to update it and something went wrong?
Hi, I tried to flash 20b through twrp tonight.
I did factory reset, then flashed the bootstack, then flashed the system. But after that, my phone won't power on. I tried to remove the battery, holding power button for a long time, or power+volumn down.
The phone just does not respond at all. Can anybody help? Thanks!
souvenir1977 said:
Hi, I tried to flash 20b through twrp tonight.
I did factory reset, then flashed the bootstack, then flashed the system. But after that, my phone won't power on. I tried to remove the battery, holding power button for a long time, or power+volumn down.
The phone just does not respond at all. Can anybody help? Thanks!
Click to expand...
Click to collapse
take the battery out and put it back in and try to power it on. Repeat a few times, if that doesn't help we'll try other things.
Still_living714 said:
take the battery out and put it back in and try to power it on. Repeat a few times, if that doesn't help we'll try other things.
Click to expand...
Click to collapse
Thank you Still_living714, I tried this multiple times, but it does not work. Anything else I can try?
souvenir1977 said:
Thank you Still_living714, I tried this multiple times, but it does not work. Anything else I can try?
Click to expand...
Click to collapse
have you tried putting it into download mode?
Still_living714 said:
have you tried putting it into download mode?
Click to expand...
Click to collapse
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
souvenir1977 said:
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
Click to expand...
Click to collapse
hmm very weird. I had a similar problem were the phone wouldn't boot unless I had it plugged into the charger or my computer,give that a try.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
souvenir1977 said:
If you are talking about holding volume button up and plug into computer, I tried that and the phone does not respond either...
Click to expand...
Click to collapse
when I had that problem I figured out that it was the battery that was making the phone act weird. Since LG sent me another battery when they had the promotion I used the other spare and that fixed it for me.
This happens right after I flashed the new system, I doubt it is the batter problem. If I plugged into the computer it still won't power on.
(If I remove the battery and plug into computer, the screen of the phone does show some symbol, probably regarding missing memory).
Let me try to see if I use kdz flash to reinstall the system. Thanks for the help.
souvenir1977 said:
This happens right after I flashed the new system, I doubt it is the batter problem. If I plugged into the computer it still won't power on.
(If I remove the battery and plug into computer, the screen of the phone does show some symbol, probably regarding missing memory).
Let me try to see if I use kdz flash to reinstall the system. Thanks for the help.
Click to expand...
Click to collapse
well it's hard to say but without the phone being able to boot there's not anything you can do.....
you are right, flashing need the download mode....
You're getting adnroidserial xxxx in device manager when you connect it to pc?
i think you bricked phone
jkjambo said:
You're getting adnroidserial xxxx in device manager when you connect it to pc?
i think you bricked phone
Click to expand...
Click to collapse
No it just shows regular LGE com port and I am not able to flash anything. You are right, it's hard bricked I am not sure what went wrong with my twrp flashing procedure though. Will contact with LG for repair.
souvenir1977 said:
No it just shows regular LGE com port and I am not able to flash anything. You are right, it's hard bricked I am not sure what went wrong with my twrp flashing procedure though. Will contact with LG for repair.
Click to expand...
Click to collapse
that's what i mean , lge serial xxx , don't remeber exactly . it's in qhsusb mode , hardbricked ...
there is some indian guys who do that , some for free, some for little amount of money ...
search for lg g3 unbrick Qhsusb 9008... don't waste time on tutorials , non of them works with D851 ... i'm in same boat (again ) and tried everything .. nothing works , unless you're connected to lg servers directly , search for people which fixs them
http://forum.xda-developers.com/lg-...1-d855-qhsusbbulk-t3101435/page2#post60751870
here you go.
this guy helped me for free , you can contact with him
Thanks! Currently my phone is at LG service since it is still in warranty. I will definitely try that next time (knock on wood...)
jkjambo said:
http://forum.xda-developers.com/lg-...1-d855-qhsusbbulk-t3101435/page2#post60751870
here you go.
this guy helped me for free , you can contact with him
Click to expand...
Click to collapse
souvenir1977 said:
Thanks! Currently my phone is at LG service since it is still in warranty. I will definitely try that next time (knock on wood...)
Click to expand...
Click to collapse
This is why You don't flash the boot chain unless you absolutely must. I was running 20B with the old boot chain (other than rpm, that was updated) and it ran just fine. If you get a bad flash on the boot chain your sol.
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
I did that to an HTC U11 once - Never got it recovered, had to toss it...
Never dared relock a bootloader since...
I had the same thing happen to me.
The only thing that worked for me is to boot recovery and wipe system. Good luck
Jhoopes517 said:
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
Click to expand...
Click to collapse
i have the same problem let me know if you figure out a way around this !
For all of you having this issue, simply use the msm for your respective device by unplugging your phone, select power off, enter edl mode with cable plugged in and run the tool. I know another solution, but please PM me if this one doesn't work.
I had this issue as well, but you better not have messed with the sensitive partitions without a backup, otherwise there's no way to repair it.
razercortex said:
For all of you having this issue, simply use the msm for your respective device by unplugging your phone, select power off, enter edl mode with cable plugged in and run the tool. I know another solution, but please PM me if this one doesn't work.
Click to expand...
Click to collapse
i cannot figure out how to run the msm tool properly it always throws an error message
KidSudo6969 said:
i cannot figure out how to run the msm tool properly it always throws an error message
Click to expand...
Click to collapse
what is the error message? Maybe you dont have the correct one.
Jhoopes517 said:
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
Click to expand...
Click to collapse
Here is the msm tool
This was fixed via MSM. But I had another issue come up where MSM doesn't work.
Jhoopes517 said:
This was fixed via MSM. But I had another issue come up where MSM doesn't work.
Click to expand...
Click to collapse
What do you mean doesnt work? What did it do?
its not responding at all. no boot loop, no logo, no nothing. just a blackscreen no matter how long i charge it or hold the buttons down.
Aleena1217 said:
its not responding at all. no boot loop, no logo, no nothing. just a blackscreen no matter how long i charge it or hold the buttons down.
Click to expand...
Click to collapse
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
ekin_strops said:
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
Click to expand...
Click to collapse
after installing driver it recognized it in EDL mode. Im also JUST seeing that this is for the 9 and not the 9 pro. im guessing thats the issue? ii cant believe i missed that
Aleena1217 said:
after installing driver it recognized it in EDL mode. Im also JUST seeing that this is for the 9 and not the 9 pro. im guessing thats the issue? ii cant believe i missed that
Click to expand...
Click to collapse
Yes, it's for the Pro, but the procedure is the same. A good thing is that EDL works. Now just grab the MSM Tool for your model and flash it.
ekin_strops said:
Yes, it's for the Pro, but the procedure is the same. A good thing is that EDL works. Now just grab the MSM Tool for your model and flash it.
Click to expand...
Click to collapse
thank you so much. msm is downloading now. while I have you, do you have a link for the 9 pro conversion files? id really like to get that xpan update finally...
ekin_strops said:
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
Click to expand...
Click to collapse
im sorry i just realized i jumped in the middle of a different thread. This happened while trying to flash tmobile oneplus 9 pro to global firmware and after trying to enter recovery mode. Im guessing it happened because the files are for one plus 9, so im looking for the files for a 9 pro conversion but only am finding msm tool downloads for conversion instead of flashbin files.
Aleena1217 said:
im sorry i just realized i jumped in the middle of a different thread. This happened while trying to flash tmobile oneplus 9 pro to global firmware and after trying to enter recovery mode. Im guessing it happened because the files are for one plus 9, so im looking for the files for a 9 pro conversion but only am finding msm tool downloads for conversion instead of flashbin files.
Click to expand...
Click to collapse
Before I jump to conclusions, could you explain exactly which model you have and what is your goal?
ekin_strops said:
Before I jump to conclusions, could you explain exactly which model you have and what is your goal?
Click to expand...
Click to collapse
i have the le 2127 from tmobile because i didnt know any better. i dont want to root or do anything crazy. I just want to be able to flash to global or eu firmware so i can upgrade as oneplus releases the updates and not be a year behind on tmobiles schedule. I have the sim and bootloader unlocked successfully. I started to flash to the one plus 9 firmware because i somehow missed that it did not say pro. So now my phone in unresponsive except for QDL 9008 mode. MSM tool recognizes it and begins to update it but then gets a param preload "device not image match" message in red and stops. So once i figure out how to get past that and get this set to factory, i want to properly flash it to global or eu, whichever is available, and upgrade it to the latest version.
Aleena1217 said:
i have the le 2127 from tmobile because i didnt know any better. i dont want to root or do anything crazy. I just want to be able to flash to global or eu firmware so i can upgrade as oneplus releases the updates and not be a year behind on tmobiles schedule. I have the sim and bootloader unlocked successfully. I started to flash to the one plus 9 firmware because i somehow missed that it did not say pro. So now my phone in unresponsive except for QDL 9008 mode. MSM tool recognizes it and begins to update it but then gets a param preload "device not image match" message in red and stops. So once i figure out how to get past that and get this set to factory, i want to properly flash it to global or eu, whichever is available, and upgrade it to the latest version.
Click to expand...
Click to collapse
Are you getting the mismatch on the global/eu MSM or are you trying to flash back to stock T-Mobile? You're getting a mismatch because you're most likely using the wrong version of a firmware (msm).