hELLO..
I have had a moto g5 with oreo and magisk installed I tried to unistall magisk from magisk app after reboot it told me that startup failed then flashed an nougat rom and it worked perfectly but without imei numbers so i deleted cache from twrp recovery and tried to install the same software again but it gave me the error at the end ..what should I know now to fix the mobile knowing that when i try to select recoverymode it tells me ersing and then takes m back to fastboot
note the first time i just opened a bat file with the software that installed the software automatically..
the bat file told me that
<bootloader> slot-count not found
<bootloader> slot suffixes not found
<bootloader>has-slot:fsg not found
hELLO..
I have had a moto g5 with oreo and magisk installed I tried to unistall magisk from magisk app after reboot it told me that startup failed then flashed an nougat rom and it worked perfectly but without imei numbers so i deleted cache from twrp recovery and tried to install the same software again but it gave me the error at the end ..what should I know now to fix the mobile knowing that when i try to select recoverymode it tells me ersing and then takes m back to fastboot
note the first time i just opened a bat file with the software that installed the software automatically..
the bat file told me that
<bootloader> slot-count not found
<bootloader> slot suffixes not found
<bootloader>has-slot:fsg not found
Click to expand...
Click to collapse
Code:
<bootloader> slot-count not found
<bootloader> slot suffixes not found
<bootloader>has-slot:fsg not found
This is a totally normal output
You either have an error elsewhere or you are trying to flash wrong firmware
If you have a working bootloader there's no need to flash gpt or bootloader parts of the firmware if you are flashing the same android version - if you are upgrading android versions you will need to flash these
The commands are
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Firmware can be download from https://mirrors.lolinet.com/firmware/moto/cedric/official/
Related
I flashed stock firmware onto my phone (the last file on https://firmware.center/firmware/Motorola/Moto Z2 Force/Stock/XT1789-04/) to unbrick my phone using this batch file:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase ddr
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
I was able to successfully boot up the phone but the wifi and mobile data does not work. I cannot turn on the wifi and it does not give me the option to turn on mobile data even when my sim card is inserted. Any ideas on how to fix this would help.
Additional info: It was previously bricked because I deleted app_process32 from system/bin. It worked fine until I also uninstalled systemless xposed. I tried to flash Lineage OS but that just removed TWRP and still put me in a bootloop so then I did what I described above.
I remember the post where you said you had deleted that file, I believe you said you were on TMO. If so, flash this one, it newer than the oreo you flashed. Most likely the downgrade that is causing your problems.
Do a factory reset from stock recovery
I remember the post where you said you had deleted that file, I believe you said you were on TMO. If so, flash this one, it newer than the oreo you flashed. Most likely the downgrade that is causing your problems.
Click to expand...
Click to collapse
Thank you so much! You saved me $375 :')
fingerprint option not showing in security&location section after oreo update..pls help how to enable
sivashanmuganathan said:
fingerprint option not showing in security&location section after oreo update..pls help how to enable
Click to expand...
Click to collapse
What is the model of your device?
elios2580 said:
what is the model of your device?
Click to expand...
Click to collapse
model- moto z2 play
varient - xt1710-10
android-8.0.0
build number- ops27.76-12-25
sivashanmuganathan said:
model- moto z2 play
varient - xt1710-10
android-8.0.0
build number- ops27.76-12-25
Click to expand...
Click to collapse
maybe you can try doing a re-flash, remember make a backup of everything before in TWRP,
https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot erase cache
fastboot erase userdata
fastboot flash oem oem.img
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
If you do not get any results you can try with the latest version of the oreo android
https://mirrors.lolinet.com/firmware/moto/albus/official/RETAIL/ALBUS_RETAIL_8.0.0_OPSS27.76-12-25-3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
my friend I endeed like you and I fixed.
you need to follow different threads.
first you need to unlock the bootloader to downgrade to nougat and make EFS backup.
download twrp form here: https://forum.xda-developers.com/z2-play/development/twrp-3-2-0-0-moto-z2-play-albus-t3715660
on fastboot install twrp, enter twrp recovery(I dont allow modifications on first boot) and make a EFS backup.
connect to pc to copy the EFS backup to safe place.
download this nougat firmware: https://androidfilehost.com/?fid=962187416754466195
then you need to downgrade to that firmware on fastboot:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase carrier
fastboot erase DDR
fastboot reboot
once the phone boots to system check if you have 4g lte, imei and fingerprint now works.
now, you need to follow the steps for installing OTA form this trhead: https://forum.xda-developers.com/z2-play/how-to/official-oreo-z2-play-t3784660
when complete and finally boot you notice that you dont have signal this is normal go and check your imei and everthing be there, poweroff and enter recovery and make factory reset.
when boot everthing works signal and fingerprint scanner.
if you want to lock your bootloader you need to download full oreo firmware from this thread: https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
at least install the full oreo firmware on fastboot with this commands:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash boot boot.img
fastboot oem lock
the phone restarts automatically and you will have full oreo firmware with fingerprint and signal with locked bootloader.
I hope you understand my bad english.
give thanks to:
sevenstar75
HTCDevil
raphamfc
Junior Passos
Has this same issue after upgrading to Android Oreo on the Z2 play - fingerprint scanner stopped working. Tried a factory reset but still no go.
What I ended up doing was going back into fastboot, and doing a system wipe before flashing these files:
Code:
$ fastboot -w
wiping userdata...
Erase successful, but not automatically formatting.
File system type raw not supported.
wiping cache...
Erase successful, but not automatically formatting.
File system type raw not supported.
erasing 'userdata'...
OKAY [ 0.151s]
erasing 'cache'...
OKAY [ 0.005s]
finished. total time: 0.156s
Also I have the XT1710-06 model (Latin America), and needed to flash ALL of the files. Radio works fine for me (T-Mo).
After doing the wipe and then flashing all files, the fingerprint reader now works.
Hi, I have bricked my phone when I tried to flash my stockboot en recovery img files. What happens is that everytime I reboot the phone, it automatically reboots to the bootloader. I can access twrp.
I tried to flash stock firmware myself, but I flashed XT1921-3 instead of XT1922-3 because I couldnt find the right version. Nothing changed. I also tried to flash a GSI ROM and nothing changes there as well. Can someone help me out?
I managed to get my hands
You will have to pass the last stock in 9.0 for your G6 play, I did it in mine and I go back I was with an equal problem
i am used this version for my cellphone XT1922-5_ALJETER_RETBR_9.0_PPP29.55-25_cid50_subsidy-DEFAULT_regulatory-XT1922-5-BRAZIL-MANAUS_CFC you used similar version
in fastboot my solucion
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
Worked like a charm for my Xt1922-3 RETEU.
Hello friends, came out OTA update for my moto z2 Brazilian version, but I have twrp and magisk installed. Do I need to remove both and reinstall the original oreo firmware or can I upgrade normally?
ps: sorry i'm kinda noobie
EDIT: resolved: method posts below :victory:
You should leave it as without any modification. And install the update. Source: Own experience
dark-basic said:
You should leave it as without any modification. And install the update. Source: Own experience
Click to expand...
Click to collapse
so if i install stock recovery and remove magisk completely can i upgrade without problems?
viniisiilvaa said:
so if i install stock recovery and remove magisk completely can i upgrade without problems?
Click to expand...
Click to collapse
after some internet research, i did the update as follows.
MOTO Z2 PLAY MODEL XT1710-07 (I don't know if it works on other models)
1 - be in the version "RETBR OPSS27.76-12-25-23"
2 - completely removed magisk
3 - original re-flash recovery from last rom OREO from fastboot (XT1710-07_ALBUS_RETBR_8.0.0_OPSS27.76-12-25-23_cid50 ...) to remove TWRP
4 - Download Pie rom (XT1710-07_ALBUS_RETBR_9.0_PPS29.133-30_cid50 ...)
5 - Flash from fastboot with the following commands (I did not wipe not to lose the files)
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
took about 15-25 minutes and went back to normal operation. :victory::victory::victory:
PS: I am not responsible if your phone has a problem after this process. :good:
Hi there guys,
I need help with my phone. I've flashed TWRP on it so i would be able to flash a custom ROM. Everything went fine and i was able to install the custom ROM without errors. Now, everytime i start my phone it only shows the "No Command" screen with an open belly Droid. The only way i'm able to boot it is going to fastboot mode and booting into Factory Mode.
I tried flashing the stock rom with several different methods, and all ends in the same, the "no command" screen on boot.
It's now flashed with the stock rom but i can't get it to boot normally. I've tried Formatting /data, /cache, everything in my hands. What should i do?
how, exactly, did you flash twrp?
using the instructions provided on twrp website
and what procedure did you use to re-flash stock?
i tried using fastboot and also the "Rescue and Smart Assistant" app, both ended up with the same results
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
try doing this
hi there,
that's what i did when i mentioned that i flashed using fastboot...
sergiobaiao said:
hi there,
that's what i did when i mentioned that i flashed using fastboot...
Click to expand...
Click to collapse
these exact commands in this exact order?
yes, exactly
then unfortunately im out of ideas