Hi folks,
in this thread (https://forum.xda-developers.com/g5/development/treble-project-treble-cedric-t3820451) it was recommended to flash a LOS 15 treble build before any GSI. (I guess this was necessary for some drivers like camera to work?)
How do you have to proceed if you want to install a Pie GSI? A LOS 16 treble build doesn't exist.
Is it even necessary and what would happen if I would just flash a Pie GSI?
Thanks in advance
You can easily flash Pixel sgsi with los15.1 there will not be any problem but for Q GSI we need pie treble so we have to wait for pie treble so then we can flash Q GSI.
Related
Can I flash treble gsi in mediatek devices ?
I have mt6739 chipset with android 8.1 and treble is enable by manufacturer default
Sorry for my bad English
If you have separate vendor and system partitions you can try it.
Just be sure to take backup before that.
General rule of thumb:
Find how to install custom recovery for your device (like Twrp)
and then proceed full backup from it and install the GSI custom image to system and probably some custom kernel.
Be sure to not wipe your recovery or atleast install it before reboot to be sure you always can go back and restore your backup.
Thanks bro
I have installed twrp by hovatek auto mtk twrp porter tool
But I have doubt that is it support treble or not
Also what is treble recovery ?
I have flashed resurrection remix it work freaking awesome
Bugs:
1.No volte as gsi not support volte
2.Hotspot not start
2.Magisk not working
Beside this rom is working very smooth
chandan2000 said:
I have installed twrp by hovatek auto mtk twrp porter tool
But I have doubt that is it support treble or not
Also what is treble recovery ?
Click to expand...
Click to collapse
Treble recovery have support for /vendor partition
I have mediatek 6739 device with me I have flashed many gsi like Cr droid havoc os lineage os ect before a year but as of now I want to flash Cr droid on my device I could not flash any gsi it shows flashing completed but doesn't boot into system. Any idea
My device is yu ace 5014
Android version 8.1
Which android version is possible to flash gsi
Ganeshtechy said:
I have mediatek 6739 device with me I have flashed many gsi like Cr droid havoc os lineage os ect before a year but as of now I want to flash Cr droid on my device I could not flash any gsi it shows flashing completed but doesn't boot into system. Any idea
My device is yu ace 5014
Android version 8.1
Which android version is possible to flash gsi
Click to expand...
Click to collapse
Hi,
cause of this Device is not highly frequent on our Planet. There are no custom Rom direct for this Phone. If you want to try a GSI Rom. You need to please consider that the GSI Roms need Drivers to for the integratet Hardware of the Phone. I dont think that a A11 GSI will really work. The Phone have Stock A8.1.0 and if you find GSI with A8.1.0 that will stable work...you are lucky guy...a GSI A9.0 with minimal bugs...you will be more then just lucky i think. But up to A10 or A11 will not practical work for sure but hey check out by trying
solong
speedson
speedson said:
Hi,
cause of this Device is not highly frequent on our Planet. There are no custom Rom direct for this Phone. If you want to try a GSI Rom. You need to please consider that the GSI Roms need Drivers to for the integratet Hardware of the Phone. I dont think that a A11 GSI will really work. The Phone have Stock A8.1.0 and if you find GSI with A8.1.0 that will stable work...you are lucky guy...a GSI A9.0 with minimal bugs...you will be more then just lucky i think. But up to A10 or A11 will not practical work for sure but hey check out by trying
solong
speedson
Click to expand...
Click to collapse
Android 10 is working but no volte I use JIO so volte is needed can I know where volte modem files are placed in ROMs !
can someone help I have unisoc t310 and i flashed gsi lineage 17.1 on a android 11 tablet but it wont boot lineage it just goes to bootloader, i made sure that vendor_oem was untouched and the rest was erased to make room for lineage
can i get pie vendor to install sgsi dec patch if possible
to install any GSI you should simply use Oreo base/vendor, I've already seen local users have success using LOS 15.1 as base. Not sure where you got the impression that Pie vendor is necessary (if usable in this case at all).
Hello guys. Can i install treble gsi rom, if i have android 7. I understand that no, apparently I do not vendor.
lyoks said:
Hello guys. Can i install treble gsi rom, if i have android 7. I understand that no, apparently I do not vendor.
Click to expand...
Click to collapse
Sadly you can't 'cause treble was added on Oreo for the 1st time. You must upgrade to android 8.x (with treble support, as not every device with oreo support treble) and than you can do "anything" you want.
The biggest problem is /vendor partition. If your OEM doesn't have added it you will have lots of troubles and you won't be able to flash any treble ROMs
The fact of the matter is that there is no way to upgrade to android 8.0. It is unlikely that a vendor will work from another phone zte 9 vite, i have zte blade A6.
I've found a way to flash new Android Q beta 3 GSI on any phone that support project treble officially or unofficially and after doing all the steps the phone didn't boot into OS it was just keeps rebooting into bootloader does any one know what is the problem or how to solve it ?
Android Q thread : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Android Q GSIs download link : https://mirrors.lolinet.com/firmware/gsi/
basem bebarse said:
I've found a way to flash new Android Q beta 3 GSI on any phone that support project treble officially or unofficially and after doing all the steps the phone didn't boot into OS it was just keeps rebooting into bootloader does any one know what is the problem or how to solve it ?
Android Q thread : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Android Q GSIs download link : https://mirrors.lolinet.com/firmware/gsi/
Click to expand...
Click to collapse
which base rom did you flash
Sonisudhanshu said:
which base rom did you flash
Click to expand...
Click to collapse
The Treble Lineage OS 15.1 ROM
Which of these GSI's work in cedric? And how does the installation?
BatatinhaDoce said:
Which of these GSI's work in cedric? And how does the installation?
Click to expand...
Click to collapse
Generic A-only
installation for A-Only :
Install img into system partition
Flash permissiver_v2.zip or make your boot partition selinux permissive
Flash FixZygote.zip
Reboot
basem bebarse said:
The Treble Lineage OS 15.1 ROM
Click to expand...
Click to collapse
I think this will require treble lineage os 16.0
Try asking codezero but with patience
Sonisudhanshu said:
I think this will require treble lineage os 16.0
Try asking codezero but with patience
Click to expand...
Click to collapse
I think you're right but in Android Q original thread he said
Requirements :
Treblized device with 8.1 or P vendor
So i think treble Lineage OS 15.1 should be working to
basem bebarse said:
I've found a way to flash new Android Q beta 3 GSI on any phone that support project treble officially or unofficially and after doing all the steps the phone didn't boot into OS it was just keeps rebooting into bootloader does any one know what is the problem or how to solve it ?
Android Q thread : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Android Q GSIs download link : https://mirrors.lolinet.com/firmware/gsi/
Click to expand...
Click to collapse
Google said only devices that support treble officially can install Android Q. Project Treble with a Q-compatible vendor isn't here yet for cedric. Nor is the current Oreo vendor suited for flashing the Q GSI
Hi does GSI Rom works ? On our Daisy ?
Thks
I want to install aosp 10 phhusson ROM
GSI works on most of phones that support treble, so Daisy too. Don't know how to install android 10 GSI tho