Related
I will not be monitoring this thread, I have a T-Mobile T999 but wanted to share this with the SGS3 community at large. Feel free to post results, and any additional mods (ie. Getting it to work with ASOP Rom's) in my original thread
For some reason, beyond my comprehension, Samsung have this great app, but have yet to open it up to the SGS3. I have been resorting to downloading it and installing it on my HTC HD2 (Running CM9) backing it up with Titanium, and then copying the backup over to my SGS3, and restoring the backup. A bit round about, but works.
The App, for those that don't know, allows you, with a Samsung high-end TV or BR-Player, use the app to not only as a remote, but as a second mirrored screen, with audio. Great for trips to the kitchen, bathroom, outside, or in another room (although range is limited by your router).
[Supported TV Models]
- Samsung Smart TV released in 2011:
Models greater or equal to LED 7000, PDP 8000
- Samsung Smart TV released in 2012:
Models greater or equal to LED ES7500,(Models greater or equal to LED ES7000 in Europe, Models greater or equal to PDP E8000 Models(E7000 Models in North America)
[Supported Phone]
While technically only SGS2, it works with SGS3 stock rooted rom, but should work on most with a stock base. It will not work on CM9/10 and ASOP ROM's but you could give it a try and let me know.
Here is the actual app, I extracted it from my Titanium backup figuring someone could use it until Samsung get around to updating the Market to let you just download it. The only thing I can't get to work is Bluetooth power on. I can pair with my TV, but it just doesn't show up until I have turned it on. I also had an issue with it working over the the 5Ghz 802.11n band, but with 3.1.9 that doesn't seem to be an issue anymore.
Version 3.1.9 - 39MB - Confirmed Working for me with 2011 PDP51D8000 Model
Version 3.2.0 - 40MB - Also Confirmed working
The Full description from Google Play:
[About the Application]
This application is Wi-Fi remote control for Samsung Smart TV. If both your phone and TV are connected to the same wireless Router, your phone will link to the TV automatically where you can use your phone like a remote control. The TV can also transfer live feeds to your phone.
[Main Features]
- Dual View
Enjoy TV and other multimedia right from your mobile device that’s connected to Samsung Smart TV. You can even send what you’re watching on your mobile device to TV and watch it from TV.
- Bluetooth PowerOn {I will add, never got this to work, despite pairing TV}
You can use your mobile device to turn on your TV using Bluetooth (available for certain TV and mobile devices only).
- Remote
Your mobile device can work as remote for your Samsung TV or BD products. Full remote screen is provided by default, and three tabs are provided at the bottom of the screen to help you control connected devices with ease. On screen keyboard shows up automatically when you need to enter text.
- Game Controller
With this feature, your mobile device can control games on TV. Full and Simple modes are available. Turn on Gyro function on your mobile device, and control games by tilting your mobile device.
- Movie Note (Models BD-E5900 or above, HTE4000or above (US only))
You can get information of DVD/BD title on your mobile, while you watching movies.
Ratings, synopsis, cast and director's information will be provided.
- Audio Settings (Models HT- E4000 or above)
You can control your speaker system by your phone.
Sound mode, distance of each speaker and sound level(dB) can be changed.
- Remote Scheduler (Models BD-E8000 series, STB-E7000 series EU/Australia/New Zealand Only)
Recording TV shows through your TV when you're outside.
- Settings
You can fine-tune control for TV and BD by adjusting gesture sensitivity in your mobile device.
[How to set up]
1.Check if Wireless Remote Control or Network Remote Control is enabled in your TV’s System or Setup menu. If you don’t see either of them in the menu, Samsung Smart View App can’t be used in your mobile device.
2.Connect wireless/wired router to TV LAN port, or connect Samsung Wireless LAN adapter to TV USB port.
3.Connect your phone to wireless/wired router.
Thank you,, just what I wanted
Nokia7Vista said:
Thank you,, just what I wanted
Click to expand...
Click to collapse
Very glad I could help. Just wanted to share back...
Thanks...missed this app..al is working well also bluetooth is working fine to start en turn off tv
Verstuurd van mijn GT-I9300 met Tapatalk
What about the 3.2.1 version? Can anyone share it?
Thanks, i didnt even know such an app exists
Anyone? I cannot download it with the sgs3, but could be done with a sgs2. Please share the 3.2.1 version.
Hello,
I have an issue with the App. I can´t see, what there stands. The Display always turns on and off.
I´m using Omega v34.
Edit: I´ve connected it with TV. It is working fine. But the Display turn on and off issue still exists.
App is working with Omega v34. But for me only the remote control and the gaming control.
NO dual view and the other stuff. My TV is UE46C7700.
Screen off and on issue is after device reboot gone.
mikescorei said:
What about the 3.2.1 version? Can anyone share it?
Click to expand...
Click to collapse
mikescorei said:
Anyone? I cannot download it with the sgs3, but could be done with a sgs2. Please share the 3.2.1 version.
Click to expand...
Click to collapse
dcade said:
App is working with Omega v34. But for me only the remote control and the gaming control.
NO dual view and the other stuff. My TV is UE46C7700.
Screen off and on issue is after device reboot gone.
Click to expand...
Click to collapse
I can no longer access the new file on my old HD2, it no longer shows up. Tehrefore I can't post 3.2.1 but the viersions here work, and nothing major in 3.2.1 that would require an update and if you look online, it says nothing new. So while 3.2.1 may be nice to upgrade too, I can't see any requirement to do so, if the version you have works.
Just read teh comments on the 3.2.1 version of the app, looks like 3.2.1 doesn't work more than it works. Numerous comments about it breaking dual view, or issues with Flicker. So if 3.2.0 or 3.1.9 work for you, then stay with them
Dual View is only guarenteed to work on Samsung TouchWiz based ROM's. I have it working on both my GIII (Now ith Jelly Bean) and Galaxy Tab 10.1. Custom ROM's may not include all the components that are required to make this work. I doubt anything in 3.2.1 will change this, and make it work for some who aren't working now. Both the TV and the phone have to be compatible or you just get a very large file for a remote control.
Also in the main thread, see link in OP, there is an even earlier version for those to try who are having problems...
works great
bluetooth power on : (selected model tv only.. 7000 and 8000 series have this. others , wouldnt know)
first start app you would turn off bluetooth and wifi and let the app complain about the missing radio and quit app (clean memory in taskmanager to be sure)
now pair your tv > within 50cm reach of the TV (security feature)
turn off bluetooth
start app and wait for it to nag about missing bluetooth. turn on bluetooth with the prog and see in the popup if your tv is listed as paired. if not do the pairing again. (it needs a few tries sometimes) press back and now see if it shows your tv and press bluetooth power on icon and wait for the tv to respond and after that to connect to wifi and connect to your phone.. takes about 40 secs or so.
3.20 works best for s3 i9300 on stock rom
app requires DRM , decryption service and samsung movieplayer and offcourse a samsung build.prop
3.21 porting to s3 > not so easy, you may want to read a little more about the crappiness of it.
edit: using version 3.20 still works great with 4.1.2 luxemburg stock rom rooted with CMW philz touch, modded bootloader, led-mod and signed multiwindowmod, apex 2.4 pro launcher. BT power-on works. in multi-window with other app works. if u dont see controls in fullscreen turn off gesture control and or taskbar hiding or just press where the button supposed to be normally. version 3.22 from market doesnt work, only remotecontrol.
working on perfect on 4.1.2
I am paired but still doesn't show up to power on.
nygmam said:
I am paired but still doesn't show up to power on.
Click to expand...
Click to collapse
did you allow the app on tv ? and for older models turn on external control thing in tv menu.
da_jojo said:
did you allow the app on tv ? and for older models turn on external control thing in tv menu.
Click to expand...
Click to collapse
I have the 2011 PDP51D8000 Model TV, and have looked at all menu options, but still can't seem to get power on to work. Not a big deal, would be nice, but I can live without it. Just glad Dual view works flawlessly on both my SGS3 and Galaxy Tab 10.1.
Finally!
I've been looking a long time to get my remote back. Thanks a lot for this!
I can also confirm that this app works fine with Samsungs C8705.
Too bad i got a UE37ES5500 TV and it doesn't support this option.
It works on Galaxy S5
Tested and Working perfectly on Galaxy S5
Can't fint TV.
This app can't find my TV (C8705) any more and I'm using a Nexus 4 with Lollipop. I think it stopped working before I got Lollipop but I'm not sure. I've set a DMZ between my device and TV in my firewall, so that can not be the problem.
Any ideas?
You can download our free trial apk and install it to fire TV, all of sudden, your fire TV is also a Chromecast receiver.
Please refer to this thread:
http://forum.xda-developers.com/har...p-youmap-chromecast-receiver-android-t3161851
Download this apk: [apk, updated on Jan-17-2016, now version 1.4.0, it will expire on Feb-29-2016]
http://www.youmap.com/YouMapCastReceiver.apk
Instructions: (good for fire TV box and stick)
(1) Enable ADB and USB Debugging - go to Amazon TV, Settings, System, Developer Options > tun on ADB Debugging and USB Debugging
(2) Now, you need to find the ip address of the FireTV device, System > About
(3) Now from another PC, you can use adb command to install the YouMap Chromecast apk.
adb connect your-ip-address-of-firetv
adb install YouMapCastReceiver.apk
(4) reboot fire TV, and it's ready for casting.
Have fun !
Haven't had a chance to try but looking forward to it. I'll edit the post when I do...
Notice no option to buy full version yet. Is there an estimate on what it'll cost?
Update--Sorry. Got some questions right from the start. Usb debugging ejects the usb drive and makes it unusable. Lots of people use an external drive on aftv so this might be a problem.
It works for sure, however, I'm not sure if I'm utilizing it correctly? I was hoping it would mirror my display, but it doesn't appear to, not even if i enable mirroring on aftv. Maybe it's not suppose to...
But, so far the only thing I've gotten it to do is to cast youtube and we can already do that without losing usb functionality. Please correct me if I'm missing something. Thanks.
The USB thing is only one time for installation. Once installed, you don't need USB connection at all. Our app will auto start every time when you boot fire TV.
It can mirror screens, install Google Chromecast app on your device that you want to mirror. Click Screen Mirroring from left side, that's it.
huisinro said:
The USB thing is only one time for installation. Once installed, you don't need USB connection at all. Our app will auto start every time when you boot fire TV.
It can mirror screens, install Google Chromecast app on your device that you want to mirror. Click Screen Mirroring from left side, that's it.
Click to expand...
Click to collapse
Awesome! Works great BTW. Is it possible to set it up on multiple aftvs and AFTV stick?
yes, you can install it on multiple receivers, you may need to name them differently to differientiate them. Our app has a setting page to specify the name. However, on Fire TV, the setting page won't show up, we are working on a amazon version, that should install directly from Amazon store. it will take some time for that release though.
You can access the Youmap settings page on a Fire TV. From the home page scroll down to Settings, then goto Applications and down to Manage Installed Applications. Then scroll down to Youmap Chromecast Receiver, select it and then select Launch application. That will take you to the Youmap settings.
Ahh, Thanks, darren1. I didn't know that
Its a restriction on all sideloaded apps. they can't be launched straight from the Fire TV home screen. When you release an official version through their appstore anyone purchasing it would be able to launch it from the homescreen.
Well I like it. The chromecast app should be a welcome edition too except I need to reinstall play services. Forgot I had uninstalled it to fix play store crash on launch. But your app is working well. Its more reliable than normal YouTube casting because it doesn't care whether my AFTV is Ethernet, 2.4ghz or 5ghz. Normally I can't connect my phone if its on 2.4 while my AFTV is on 5. Not a lot of time testing but so far lag seems minimal.
It works on my firetv connected straight to router , but it doesnt work on my aftv stick ,complains about port 8008 and uses 8010, but chromecast on my sg3 still doesnt detect it and its on the same network
Sometimes, you need to use google chromecast app Screen Mirroring to search for the device, once it finds the device, it will work. Also try to reboot your router, and on your sending device, try to turn off/on the wifi.
Got play services reinstalled and very impressed with performance and ease of use once its set.
I did have one issue but not sure its related. Both times I used chromecast, my AFTV switched from 5 GHz to 2.4ghz. Doesn't usually drop the signal like that. And it wouldn't normally be an issue but I use mysql and that sometimes won't work properly if all my devices aren't hardwired or on 5ghz.
Do you think this is related to chromecast or should I troubleshoot elsewhere? I know normal screen casting doesn't work for me if the devices are on different frequencies. This one does but wonder if the reason for that is its somehow able to auto change it.
Our youmap receiver does NOT require google play services.
About wifi 2.4 vs 5GHz band, our app does not change that, it uses whatever wifi is currently on. Ethernet is usually much more stable, though.
This works great on my firestick and firetv! Before, I had a few apps that were cast ready (I originally had chromecast) that showed the cast icon. I could no longer cast once I got aftv, the icons didn't even show up in my apps anymore even though I knew it was available. I just watched on my phone only. I dl'd this app to my phone and sideloaded it to my ftvs and ftv via another useful app via my phone. I gave each device a separate name and rebooted. (Oh, and ticked the box to start up with device) Now, my cast icons show up in my favorite apps, and I am able to cast! I am Soo freaken happy!! It also shows both my cast channels.
Sent from my iPad using Tapatalk
I noticed in the other thread that it said the app listed would expire today. Since I don't have the play store installed how can I go about getting the paid version or at least continue to use this version?
Will post an update to keep this trial going
The apk has been updated, now expires on August-31-2015.
it fixed the chrome tab mirroring issue, and improved the device discovery. Please give it a try.
Now it works great on the firetv. But tell me please are you planning to bring the app to amazons appstore or how will your licencing work, when you can't install googles playstore on a non-rooted device?
right, the licensing issue is the last thing we are working on for Amazon store. We are checking if Amazon has similar apis as google play app licensing, still no definite answer yet. If Amazon does not provide such api, we can do it ourselves by entering a license key, not the best way.
Rincewind2011 said:
Now it works great on the firetv. But tell me please are you planning to bring the app to amazons appstore or how will your licencing work, when you can't install googles playstore on a non-rooted device?
Click to expand...
Click to collapse
For some reason we don't understand yet, chrome tab mirroring works only on fire TV box, not on fire TV stick, all other features are same on both.
This is a trial version of our popular Android VNC Server for fire TV Box and Stick. With this app, you can view and control fire TV using a VNC client or a web browser that is running on another computer or mobile device.
Trial apk download:
http://www.youmap.com/VMLiteVNCServer-firetv-trial.apk
This app is also available from Amazon store as a paid app for $5.99.
It's very easy to use on fire TV, just simply click Start button.
Instructions:
(1) Enable ADB Debugging - go to Amazon TV Box or Stick, Settings, System, Developer Options > tun on ADB Debugging
(2) side load the apk from above link
(3) Launch the app from System > Applications > Manage Installed Applications > VMLite VNC Server, then click Start button, and it will display ip address and port number to connect. You only need to do this once, the vnc server is configured to auto start after subsequent reboots.
(4) Download a vnc client (TightVNC is recommended) to your PC, or use android vnc client on android devices, or use builtin vnc viewer on MAC, or simply use a browser to view and control fire TV.
That's it, and have fun!
Forgot to mention, why you would need this?
(1) use computer display. mouse, keyboard to remote control fireTV. Very good for developers, I personally use vnc server to develop our apps on fireTV. No need for extra display.
(2) Use android phone with this app, act as a remote control, also with display for quick positioning.
huisinro said:
Forgot to mention, why you would need this?
(1) use computer display. mouse, keyboard to remote control fireTV. Very good for developers, I personally use vnc server to develop our apps on fireTV. No need for extra display.
(2) Use android phone with this app, act as a remote control, also with display for quick positioning.
Click to expand...
Click to collapse
When I try to install this app on my Fire TV (4k), it says something to the effect of "This app can only be installed on the Amazon Fire TV".
I have ADB debugging on, and I've made sure that there are no parallel ADB connections.
Any ideas?
It's doesn't work.
When I start the App, they says Update needed.
Not working on the ATV2 running 5.0.4. "This trial version works only on Amazon fire TV"
The pro version complains that it's not licensed, presumably because Google Play services aren't available.
Haven't been in this forum in awhile and missed this. I tried it and it said something it doesn't work or something like that. So what I'd like to know....is this because the trial apk expired? If I purchase the app from amazon will it work on my rooted gen 1 AFTV? and if I update to OS 5 I assume it will also work there too...
any update on this?
is there a working version for firetv
i'll pay but dont want to have that license issue on a firetv that doesnt have the google play services
Hi @huisinro,
Can you upload again the apk test, please?
fastest way for PC / Mac / Linux.. do it with scrcpy
Download latest release release
connect to your stick tv from adb connect for example:
adb connect 192.168.1.105:5555
Click to expand...
Click to collapse
connected to 192.168.1.105:5555
Click to expand...
Click to collapse
After that run scrcpy.exe on windows.. or jar on mac... you will see the display
(this also works for any adb connected android)
Thanks scrcpy devs
I am able to upload the apps to the fire stick but cannot seem to open them completely. I downloaded the wukong remote app, have a bluetooth keyboard hooked up to my Samsung un65h7150 which seems to have a pretty fast processor and also have the directv tablet app on the stick as well. I can sign in with directv but have great difficulty navigating with fire stick remote and the keyboard as well. I can get as far as highlighting a channel but to open it up never happens- no enter buttons work neither on the wukong 'try now'
Any help would be appreciated.
QUOTE=vulcan195;63789983]Does this work on the latest Fire TV box running Fire OS 5?[/QUOTE][/QUOTE]
tjmethod said:
I am able to upload the apps to the fire stick but cannot seem to open them completely. I downloaded the wukong remote app, have a bluetooth keyboard hooked up to my Samsung un65h7150 which seems to have a pretty fast processor and also have the directv tablet app on the stick as well. I can sign in with directv but have great difficulty navigating with fire stick remote and the keyboard as well. I can get as far as highlighting a channel but to open it up never happens- no enter buttons work neither on the wukong 'try now'
Any help would be appreciated.
QUOTE=vulcan195;63789983]Does this work on the latest Fire TV box running Fire OS 5?
Click to expand...
Click to collapse
[/QUOTE][/QUOTE]
You need to side-load the app to your phone or tablet, open app and connect to your Firestick IP, once connected It will automatically install the wukong app on your firestick . Once you see the app under your main\apps you are good to go.
Hi thanks I thought it just wasn't completely compatible. I did download the 'appstofire', app from GP, opened it up after I had the wukong and direct tablet already downloaded (from gp) and then opened the appstofire app, selected those apps to upload then got an error to select setup. I then put in my IP and then was able to upload or transfer the wukong and directv apps to the stick. So you're saying they need to be sideloaded instead of how I'm doing it- I did see an app called fire tv stick side load app somewhere on here- I'll try that when I get in- hopefully this works since the 'appstofire' app didn't - thanks for your help :good:
Uninstall sideloaded apps. Go to playstore and download wukong app on your phone\tablet, lunch it and search for your box IP,select it and will attempt to connect, once connected it will automatically install wukong app on your fire TV. When this is all done you should be able to see the pointer on your screen and navigate through using your preferred type of build in modes ( touchpad, dpad, mouse or keyboard)
Hi not sure what I am doing wrong but once uninstalling the apps from the firestick and downloading the wukong app for 'kodi' instead of any other then launching it and selecting ip, it asks last 2 numbers which I put in and hit search and I get no device found which dosen't make sense. I have unkown sources on and usb degug on set, it tries to initialize but fails and says 1 minute to resolve but goes to a tutorial troubleshoot page without connecting?
bula1ca said:
Uninstall sideloaded apps. Go to playstore and download wukong app on your phone\tablet, lunch it and search for your box IP,select it and will attempt to connect, once connected it will automatically install wukong app on your fire TV. When this is all done you should be able to see the pointer on your screen and navigate through using your preferred type of build in modes ( touchpad, dpad, mouse or keyboard)
Click to expand...
Click to collapse
Hi I know what you were explainging was a pretty simple, quick access to the application but I seem to be experiencing a problem connecting to it on my firestick. Once installing the app on my phone for example and then trying to access it on the stick, it shows ‘smart tv’ which is checked and ‘my devices’ which has a rectangular green box that is labeled ‘connect’ but not ‘firetv’. When tapping ‘connect', I get ‘initializing’ then failed to initialize showing the troubleshooting page suggesting developer options and usb debugging which are all on. The only other problem that I thought may be the issue was having all connections the same which they are now on the same wifi extender that has the best signal. This didn’t change anything. I then checked the IP address on the firestick which is 192.168.1.12 and it when hitting ‘Input IP to search’, it asks for the last 2 digits but when entering the 12, I quickly get ‘no devices found please try again. I then checked the IP on my tv and found its IP’s last 2 digits are 22 not 12 which I don’t see how I would change these or even if this would be the problem since it is the firestick that I am trying to get recognized. Besides, even though ‘smart tv’ shows up in the ‘New Devices’, Wukong is not functional with the actual tv either. The other suggestion they give was to install the server onto the tv but once copying that fires on to a flash drive then plugging it into my Samsung smart tv, I cant even access the file on the tv.
If you or anyone can shed any light on my situtuation - it would be appreciated
[/QUOTE]
You need to side-load the app to your phone or tablet, open app and connect to your Firestick IP, once connected It will automatically install the wukong app on your firestick . Once you see the app under your main\apps you are good to go.[/QUOTE]
I'm also stuck
When I use Wukong Remote, it doesn't detect my Fire TV. I have ADB debugging and Unknown Source both on. Might there be another setting I am missing so my Firestick can be detected?
How to Cast Your Screen and what are the Wired and Wireless Solutions to Share Your Screen?
Hi,
App: https://play.google.com/store/apps/details?id=com.ionitech.airscreen&hl=de
PC: Google Chrome
[email protected]
[working] connecting ur android phone to ur android tv
brie12 said:
How to Cast Your Screen and what are the Wired and Wireless Solutions to Share Your Screen?
Click to expand...
Click to collapse
To cast ur screen wirelessly to an android tv
1. Go to settings
2. Search for " Cast " (w/out the quotes)
3. Click on it
4. Find the name of ur tv and connect.
IMPORTANT:
U and ur tv must be connected to the same wireless network otherwise it wont work
For Sony TV's u can download the official app from the playtore: Video and TV Sideviewer
it will give u a virtual remote, a mouse interface and many more features.
Using this method-
Click on the inputs button of HDMI on the remote
scroll down to screen mirroring and then repeat the steps that i mentioned above in the post.
Most of the TV's use this kind of setup only to cast ur androids screen to the TV.
Hope this has helped u.
Peace.
Wireless Mirroring
# Using Google Home App
# Using Cast Option from Notification Toggle Menu