Non-original screen stopped working after Oreo update - Moto G5S Questions & Answers

Hey there, I have this problem. I see others had it as well but I could not find any clear/reliable instructions in those threads. Currently I can interact with my phone only through an USB mouse.
Because I'd like to remain on the official update channel, is there any way to do it?
Otherwise, if I have to flash another ROM, where can I find a reliable (original?) Nougat image, and how do I prevent bricking? (I flashed other ROMs in the past and have some knowledge of the process, but it was always cyanogenmod/lineageos. This time I think I might brick something with the downgrade).
Thank you very much in advance!

MarkHopper said:
Hey there, I have this problem. I see others had it as well but I could not find any clear/reliable instructions in those threads. Currently I can interact with my phone only through an USB mouse.
Because I'd like to remain on the official update channel, is there any way to do it?
Otherwise, if I have to flash another ROM, where can I find a reliable (original?) Nougat image, and how do I prevent bricking? (I flashed other ROMs in the past and have some knowledge of the process, but it was always cyanogenmod/lineageos. This time I think I might brick something with the downgrade).
Thank you very much in advance!
Click to expand...
Click to collapse
I'm working on ParallelScreens Kernel for Oreo ARM and ARM64, wait a few days (OTA might not work afterwards though) and then flash it through TWRP.
Sent from my Moto G5S using XDA Labs

JarlPenguin said:
I'm working on ParallelScreens Kernel for Oreo ARM and ARM64, wait a few days (OTA might not work afterwards though) and then flash it through TWRP.
Click to expand...
Click to collapse
Wonderful! Meanwhile thanks to Gabriel @montanalabtesters I installed a 9.0–based ROM with ParallelScreens Depending on how it performs I might roll back to stock 8.1 with your kernel once it's out

MarkHopper said:
Wonderful! Meanwhile thanks to Gabriel @montanalabtesters I installed a 9.0–based ROM with ParallelScreens Depending on how it performs I might roll back to stock 8.1 with your kernel once it's out
Click to expand...
Click to collapse
Yep, I'm working on it. Maybe I'll do it the day after tomorrow, I'm not sure yet.
Sent from my Moto G5S using XDA Labs

Any updates on this @JarlPenguin? I also have the same problem, tried downgrading to Nougat, a few custom roms, but still, the screen stops working after a while.

fbmiranda7 said:
Any updates on this @JarlPenguin? I also have the same problem, tried downgrading to Nougat, a few custom roms, but still, the screen stops working after a while.
Click to expand...
Click to collapse
It's fixed on all up to date Pie ROMs and LineageOS 15.1.

Related

[All working except call audio and BT] [Nougat] [MM and LP bootloader] Desolation ROM

Hello XDA, I have been working on an Aosp-ish nougat rom for our beloved trltetmo. It has nearly no features yet, since it's an AOSP ROM. I'm a Nexus dev, and just recently started working on the trltetmo because I bought one. I had a marshmallow rom and kernel(but tend not to release stuff to anyone to avoid drama and the eta requests).
Downloads: https://www.androidfilehost.com/?a=show&w=files&flid=111459
I have uploaded my work to GitHub: http://github.com/TrlteNougat
For now until I get my gpu back, you have to flash this kernel for MM bootloader support: https://www.androidfilehost.com/?fid=529152257862667083
Known issues:
- Camera is wonky. It's going to be difficult to fix
- The phone acts like it's a dual sim phone, no usability is sacrificed, it just shows two APN settings and the carrier on Dialer
Features:
None yet, it's AOSPish
What is being worked on:
Bluetooth
Call audio (mixer_path issues)
The kernel source is up: https://github.com/TrlteNougat/kernel_samsung_trlte/commits/n7.0
Manifest located here: https://github.com/TrlteNougat/manifest
Nice! Subscribed.
Test build
https://www.androidfilehost.com/?fid=24723757092306996
This one doesn't reboot randomly. Still has ril and Bluetooth errors. Sound doesn't work. Camera does.
I m not dev. But great to see work on 7 ...cheers to all devs...hoping for a stable one soon thx again
I'm keeping my eye on this thank you
Sent from my SM-N910T using Tapatalk
Ril is now partially working. I can send and receive texts. Calls cause a soft reboot, but shouldn't be hard to fix. Still no data connection yet, but that'll be fixed soon enough. Wifi connects but doesn't access internet for some reason. I haven't looked into that any.
Because why not
improper bootloader and in some cases modem can cause Wi-Fi to behave similar to how you have described. I'm not a TMO user but I think there should be several versions newer than OK2
if you have any desire to return to 5.1.1 or keep the option open to do it in the future, you may want to steer clear of the newest 2 or so bootloaders as they may prohibit further downgrading. if TMO is anything like Sprint, anything PE2 and older should still permit downgrades. newer versions I have not tested or seen any info on the topic.
[QRCODE][/QRCODE]ok I did a quick check and you are in fact on a 5.1.1 modem. I don't know if you've updated your bootloader but I get the feeling you would know if you have or not lol
all TMO MM firmware is newer than the Sprint firmwares (PB5, PC1, PD1, PE1, PE2) that I know to not prohibit downgrades, so you're on your own there.
if you believe the test builds to be compatible with the Sprint model, I'd be happy to help test as time allows for it
Sterist said:
[QRCODE][/QRCODE]ok I did a quick check and you are in fact on a 5.1.1 modem. I don't know if you've updated your bootloader but I get the feeling you would know if you have or not lol
all TMO MM firmware is newer than the Sprint firmwares (PB5, PC1, PD1, PE1, PE2) that I know to not prohibit downgrades, so you're on your own there.
if you believe the test builds to be compatible with the Sprint model, I'd be happy to help test as time allows for it
Click to expand...
Click to collapse
910T can be downgradable to DOK2 but not below that (unless you use work around and flash 910T2 firmware, which will allow you to go to 4.4.4 BL , and still can come back to latest) but thats a different story, regardless of that , however , you can anytime switch among DOK2 to PE3 to PG2 in any order. I think android N for 910T should be tested on EPG2 and not on DOK2 , atleast should give it a try on EPG2. I think the dev @USA-RedDragon , already must have tried all bootloaders and basebands , i m just replying to above posts.
Manan79 said:
910T can be downgradable to DOK2 but not below that (unless you use work around and flash 910T2 firmware, which will allow you to go to 4.4.4 BL , and still can come back to latest) but thats a different story, regardless of that , however , you can anytime switch among DOK2 to PE3 to PG2 in any order. I think android N for 910T should be tested on EPG2 and not on DOK2 , atleast should give it a try on EPG2. I think the dev @USA-RedDragon , already must have tried all bootloaders and basebands , i m just replying to above posts.
Click to expand...
Click to collapse
I tried EPE3 on mm but got too frustrated with the issues. So I've been weary to try it again. But you do have a point that I should try with newer bl/modem combos. I've got a mm rom compatible with epe3, so I might as well flash that. The Odin files are on my desktop staring me down
Side note, the logs point to something bring wrong wkth the code and not a bl/modem -> rom compatibility. But I could be wrong. Never hurts to try
USA-RedDragon said:
I tried EPE3 on mm but got too frustrated with the issues. So I've been weary to try it again. But you do have a point that I should try with newer bl/modem combos. I've got a mm rom compatible with epe3, so I might as well flash that. The Odin files are on my desktop staring me down
Click to expand...
Click to collapse
to make it easier ,why dont you just flash EPG2 BL and CP using odin (as opposed to entire MM rom) .and see if it fixes any of the issues with current N build.
Manan79 said:
to make it easier ,why dont you just flash EPG2 BL and CP using odin (as opposed to entire MM rom) .and see if it fixes any of the issues with current N build.
Click to expand...
Click to collapse
I'll do that. Progress is still ongoing with all this. But this week I've been busy with an Android Dev's biggest bane: a full-time job ?
USA-RedDragon said:
Side note, the logs point to something bring wrong wkth the code and not a bl/modem -> rom compatibility. But I could be wrong. Never hurts to try
Click to expand...
Click to collapse
sure ,i do understand that I do want to ask , how about xda devs who work for CM14 unofficial? i dont see much active devs on this thread, i would have thought all the note 4 devs who worked on CM13 unofficial would jump on this to help you out
Manan79 said:
sure ,i do understand that I do want to ask , how about xda devs who work for CM14 unofficial? i dont see much active devs on this thread, i would have thought all the note 4 devs who worked on CM13 unofficial would jump on this to help you out
Click to expand...
Click to collapse
Eh. I have other devs at my disposal. Most don't use XDA, and I tend to not either, but this(like any major version bump on a Samsung) is a big endeavor, so I made the thread for people to jump in if they wanted
USA-RedDragon said:
Eh. I have other devs at my disposal. Most don't use XDA, and I tend to not either, but this(like any major version bump on a Samsung) is a big endeavor, so I made the thread for people to jump in if they wanted
Click to expand...
Click to collapse
got it thx, let me know if you want me to test 910T builds, however i do need sim to be working for incoming/outgoing calls , cant live without that rest all i can test.

BLN-L24 links have bad key in the Honor 6x Repository thread

Need to rollback, or be advised of any custom ROMS that work..
Try Elite ROM from ROM section. it should work fine.
I personally would not recommend installing Elite ROM as it is more hassle than it is worth when you try to switch ROMs. It re/debrands your device and even after restoring a nandroid your audio will not work nor will your camera function properly. What files have bad keys? I put a lot of those up and the keys should work fine....
@shashank1320 check the links in the BLN-L24 section....something got messed up when you copied my links as mine work.
@ghostair is your device bricked? IMO none of the ROMs for this phone are worth installing on a main phone because there is too much functionality lost, no disrespect to the devs. Elite ROM does have the least amount of bugs but it is a hassle as I mentioned earlier. My main gripe about it is when installing and uninstalling apps you must restart the device in order for the apps to be added or removed from the app drawer....its a major annoyance.
BLN-L24C567B110 Thanks to @Dazed No More
boot - https://mega.nz/#!ceRkHQoA!L8MECn8Ul...8JwO7ZuVEEr8mk
recovery - https://mega.nz/#!sOZAUJTZ!QKKROoWkI...UPNDwL79ZI1yQI
BLN-L24C567B360 Thanks to @Dazed No More
boot - https://mega.nz/#!hDQB3RCT!YTH2j1IhJ...y_prJHEgHdSrxg
recovery - https://mega.nz/#!Fa4DBbxS!XDIczpXcr...TApUtNvcOMEDnc
TWRP 3.1.1 didn't work for me, nor did EliteROM or his version of TWRP.
ghostair said:
TWRP 3.1.1 didn't work for me, nor did EliteROM or his version of TWRP.
Click to expand...
Click to collapse
Is your device bricked? You say you want to rollback, but have you started the process....what firmware are you on?
Dazed No More said:
....
@shashank1320 check the links in the BLN-L24 section....something got messed up when you copied my links as mine work.
.
Click to expand...
Click to collapse
Let me check mate. Thanks for pointing that out.
No it's not bricked, actually I am on TWRP 3.1.1-0, it was only EliteROM's version that didn't work. I haven't even been able to use the phone at all, for a week, and am currently on LineageOS 13 as it was only release that works for my model it seems.
ghostair said:
No it's not bricked, actually I am on TWRP 3.1.1-0, it was only EliteROM's version that didn't work. I haven't even been able to use the phone at all, for a week, and am currently on LineageOS 13 as it was only release that works for my model it seems.
Click to expand...
Click to collapse
Im confused....your original post says you need to rollback but you say you are currently on LOS 13?? Rolling back refers to downgrading from Android 7.0 (Nougat) to 6.0.1 (MM) but you are already on MM if you are running LOS 13. You also say your device is not bricked but then in the next sentence say you havent been able to use it at all for a week.....and lastly you say LOS 13 was the only release to work for your model yet every single ROM in the development forum can be flashed to the BLN-L24, I know because I have done it.
What exactly are you trying to accomplish here? Your posts are contradictory and make no sense. Id be glad to help but you gotta give me something to work with here.
Im assuming you did not make a full backup in TWRP before flashing any ROMs, in which case you have learned a valuable lesson....always have a backup. But since you dont we will get you back to EMUI which I assume is what you mean when you say roll back.
Dazed No More said:
Im confused....your original post says you need to rollback but you say you are currently on LOS 13?? Rolling back refers to downgrading from Android 7.0 (Nougat) to 6.0.1 (MM) but you are already on MM if you are running LOS 13. You also say your device is not bricked but then in the next sentence say you havent been able to use it at all for a week.....and lastly you say LOS 13 was the only release to work for your model yet every single ROM in the development forum can be flashed to the BLN-L24, I know because I have done it.
What exactly are you trying to accomplish here? Your posts are contradictory and make no sense. Id be glad to help but you gotta give me something to work with here.
Click to expand...
Click to collapse
I understand, I probably should have just used, "go back," to EMUI. Since LOS 13 isn't usable in the least, as I can't make calls, and it drops LTE.
If they work then how? I followed everything, flashing vendor.img with fastboot, then flashing the respective zip?
I'd rather not go back to EMUI, it's why I haven't been able to actually "use it as a phone," since purchase.
Why would you not want to go back to EMUI? Its smooth and everything works. EMUI is the reason you havent been able to use it as a phone?? There is not one single ROM for this device that works entirely and has full functionality. You're always going to be missing something whether its the camera, LTE, calls, etc.
You're going to have to go back to EMUI so you can update to Anrdoid 7.0 (be sure to make a full backup) and then flash away all the ROMS you like and you will see they are all broken in some way. This is most definitely not the phone to use if you are looking for polished ROMs.
My last tip before departing......download the flashable vendor zip if you still want to mess around with the ROMs, it makes life much easier. Its in one of the threads in that forum I think AOKP

Quick question about unlocking and rooting.

Besides a few apps, why root the 5T? I have rooted every phone I have ever had, but the 5T has most of what I want.
That being said, I am a flashaholic and am having withdrawals. If I do root and flash a custom rom, is EVERYTHING working or are there still issues being worked on?
thanks for any insight.
Same here. There are a few things I would like by rooting but I don't want to loss some things that only cone with oxygen os. Like the super quick face unlock. Hopefully Oreo comes out soon.
warblad13 said:
Same here. There are a few things I would like by rooting but I don't want to loss some things that only cone with oxygen os. Like the super quick face unlock. Hopefully Oreo comes out soon.
Click to expand...
Click to collapse
i flashed the beta version they released..
nixie2121 said:
i flashed the beta version they released..
Click to expand...
Click to collapse
How is it? is the navigation bar while in screensaver mode still white?
nixie2121 said:
Besides a few apps, why root the 5T? I have rooted every phone I have ever had, but the 5T has most of what I want.
That being said, I am a flashaholic and am having withdrawals. If I do root and flash a custom rom, is EVERYTHING working or are there still issues being worked on?
thanks for any insight.
Click to expand...
Click to collapse
I am the same sometimes. I got stock and I am happy for a few weeks but then watching development threads I start to get withdrawals and have to root and ROM again, then I go back to stock and on and on.
LiquidRemix is pretty solid and the main ROM I flash from time to time. Everything works on the latest official builds and the battery is insanely good. The camera suffers from time to time but that is expected as the code/drivers are not openly available. Other than that LR is amazing with excellent dev work and support.

Is there a Custom ROM for Huawei 7X/Mate SE?

Would like to use a clean version of Android instead of the EMUI version that is loaded on all their phones.
Seeing how these phones are identical, figured what would work for one would work with the other.
Thanks for giving me any insight.
Coming from the Galaxy Note 4 - hoping I'm not making a mistake with this phone that is enroute.
+1
Nothing happening on this phone I guess.
Jimi Mack said:
Nothing happening on this phone I guess.
Click to expand...
Click to collapse
Guess you haven't bothered looking at the ROMs and development section. While alot of ROMs are not what I would deem "daily material", their is working going on to get ROMs on this device.
Sent from my BND-L24 using Tapatalk
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Learning about this phone, why the A only roms?
AsItLies said:
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
Click to expand...
Click to collapse
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
I don't mind emui except that the power-saver regularly kills tasker, ad-blocking vpns, etc. I've tried everything to exempt them from power saving but no go. The battery life is outstanding though (I usually only lose 15% after a full day's usage), so for average users it's a bonus.
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Hey thanks for pointing me in the right direction. I have not installed a custom ROM in a long time.
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
JakeBuck said:
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
Click to expand...
Click to collapse
Nothing terribly serious. I didn't use it for long, but the camera option for selfie shutter 'palm to camera' didn't work. Also the recently taken shots didn't show in the bottom gallery (I read this is fixed now). And the navigation arrows at the bottom seemed to not be persistent somehow (after a reboot this was okay).
It's easy to go back to stock, except if you haven't backed everything up, have to reconfigure, add / subtract apps etc.
I'd suggest searching for the openKirin website, they seem to be doing the most development. Also follow their directions, they worked for me and pretty easy.
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Scythe69 said:
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Click to expand...
Click to collapse
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
zackzuse said:
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
Click to expand...
Click to collapse
No, you don't need a custom bootloader.
You only need unlocked bootloader and unlocked frp.
TWRP is not supported on OpenKirin ROMs (especially on 7x twrp won't work).
You just need to flash the .img file through bootloader and then reboot to recovery and do a factory data reset.
Can anyone give me some advice: I have the Mate SE, currently on EMUI 8.0.0.332 (security update available but not installed), with TWRP and Magisk. I would love to install a custom ROM, but the OpenKirin site says TWRP isn't supported. Can I still install one of those builds and just expect no support if something goes wrong, or should I find some way to return to full stock before flashing? And if I need stock recovery, where can I find a download for it? I haven't had any luck on searching here yet.
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
youssef alonso said:
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
Click to expand...
Click to collapse
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
awlonsky said:
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
Click to expand...
Click to collapse
Pretty much any GSI works so long as you have updated to EMUI 8 sometime in the past.

Is there more ROMs?

I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Mkami said:
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Click to expand...
Click to collapse
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
veekay said:
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
Click to expand...
Click to collapse
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
veekay said:
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Click to expand...
Click to collapse
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
daitalos said:
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
Click to expand...
Click to collapse
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Mkami said:
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
Click to expand...
Click to collapse
Have you tried just reloading the latest stock firmware from scratch?
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
veekay said:
Have you tried just reloading the latest stock firmware from scratch?
Click to expand...
Click to collapse
Would that work? If I did that I would still be able to download and install TWRP and have a root? Because of it being PIE
UndeadAnarchy said:
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
Click to expand...
Click to collapse
I am going to do more research on these projects because I really wish there was more ROMs its quite an amazing tablet but the potential with the stock ROM lacks a lot
Mkami said:
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Click to expand...
Click to collapse
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
daitalos said:
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
Click to expand...
Click to collapse
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
Sorry,but I don't understand what do you mean " without stock rom and only twrp"...
you can install a Gsi rom, with two ways
Via TWRP, or Via Fastboot : https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ (Tab S4 is a-only arm64)
for any other question, it is better to ask in the thread : https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
(read carefully in OP & you can post,every single question there for your device,and you will get certainly help from the developer or from any other user..)
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
You are going to have to just wipe it and start over from square one, unless you made a TWRP backup before starting all of this.
Download and flash the latest stock rom from recovery and then you can load twrp again.
I was looking at the possibility of using GSI's on some devices, and while they can offer new life to older devices, they're not entirely stable all the time unless you're willing to make your own changes. I know Lineage has made some excellent progress, but it's not fullproof yet and I wouldn't try it unless you're willing to not use your device as a daily use device.
I had an extra T-Mobile Revvlry which is basically a rebranded Moto g7 Play that I installed the Lineage GSI image and it works fairly well. However, this is more the exception to the rule and Moto devices, I feel, are far simpler in design vs certain Samsung devices. It also had a ton of trial and error involved for me to get it up and running properly.
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
slipnslider said:
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
Click to expand...
Click to collapse
Read very carefully without rush ! for " WETA Kernel + Encryption disabler " etc
especially, read the user comments carefully, and ask on the thread for any questions you have..
https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278 (Pie version)
https://forum.xda-developers.com/showpost.php?p=79483624&postcount=2
https://forum.xda-developers.com/galaxy-tab-s4/how-to/guide-sm-t83x-twrp-magisk-t4059227
( Newest Odin v3.14.4 is there : https://dl2018.sammobile.com/Odin3-v3.14.4.zip )
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
slipnslider said:
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
Click to expand...
Click to collapse
samsung,maybe at the end of july to give the upgrade to android 10....it is very likely to happen I think
yes,all Gsi Roms still have various problems unfortunately...
my opinion is: stay to stock rom for now....you can "uninstall" many applications if you want & without root, via "samsung package disabler"(paid) from playstore, or with this way:
https://beebom.com/how-remove-bloatware-android-without-root/
also,you can Install "NiceLock Downloader Companion App" ,to add some features on your device : https://forum.xda-developers.com/galaxy-note-9/themes/nicelock-module-download-links-module-t3923844
with this way I operate my device until now..

Categories

Resources