Zenfone 3 Deluxe brick edl only - Asus ZenFone 3 Deluxe Questions & Answers

Zenfone 3 Deluxe brick edl only - Asus ZenFone 3 Deluxe Questions & Answers

hello everyone, I humbly ask for your help, I have had this phone for 2 days, following an update, I find the phone practically dead, connecting it to my PC recognizes it as a Qualcomm driver, and it is already a good sign .... I downloaded Qfil to rifleshare the firmware and I don't complete it by giving me some errors, can I have your opinion? could you help me thank you.
ATTACH THE LOG OF THE FOLLOWING ERROR
16:49:50: INFO: Looking for file 'BTFM.bin'
16:49:50: INFO: Looking for file 'keymaster.mbn'
16:49:50: INFO: Looking for file 'keymaster.mbn'
16:49:50: INFO: Looking for file 'cmnlib.mbn'
16:49:50: INFO: Looking for file 'cmnlib.mbn'
16:49:50: INFO: Looking for file 'cmnlib64.mbn'
16:49:50: INFO: Looking for file 'cmnlib64.mbn'
16:49:50: INFO: Looking for file 'splash.img'
16:49:50: INFO: Looking for file 'gpt_main4.bin'
16:49:50: INFO: Looking for file 'gpt_backup4.bin'
16:49:50: INFO: Looking for file 'gpt_main5.bin'
16:49:50: INFO: Looking for file 'gpt_backup5.bin'
16:49:50: INFO:
Total to be tansferd with <program> or <read> is 3.88 GB
16:49:50: INFO: Sending <configure>
16:49:50: INFO: TARGET SAID: 'Binary build date: Jun 17 2016 @ 10:09:02'
16:49:50: INFO: TARGET SAID: 'Chip serial num: 3066003435 (0xb6bf7feb)'
16:49:50: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
16:49:50: INFO: TARGET SAID: 'VIP - Validated Image Programming is enabled - Validation is enabled.'
16:49:50: INFO: TARGET SAID: 'Image Total Size = 0xE4 (228)'
16:49:50: INFO: TARGET SAID: 'HeaderIs80Bytes = 0x0'
16:49:50: INFO: TARGET SAID: 'image_info.sw_type = 0x3 (DeviceProgrammer *insists* on this)'
16:49:50: INFO: TARGET SAID: 'image_info.sw_version = 0x0'
16:49:50: INFO: TARGET SAID: 'image_info.header_len_1 = 0x28'
16:49:50: INFO: TARGET SAID: 'image_info.code_ptr_1 = 0xF54AC112'
16:49:50: INFO: TARGET SAID: 'image_info.code_len_1 = 0x6F636E65'
16:49:50: INFO: TARGET SAID: 'image_info.x509_chain_ptr = 0x1782EE58'
16:49:50: INFO: TARGET SAID: 'image_info.x509_chain_len = 0xA3E3F20'
16:49:50: INFO: TARGET SAID: 'image_info.signature_ptr = 0x5CB92A76'
16:49:50: INFO: TARGET SAID: 'image_info.signature_len = 0x5455223D'
16:49:50: INFO: TARGET SAID: 'image_info.header_ptr_1 = 0x85E14DA0'
16:49:50: INFO: TARGET SAID: 'AuthenticateImage() Returning FALSE, secboot_authenticate() returned 0x2 (not E_SECBOOT_SUCCESS=0x0)'
16:49:50: INFO: TARGET SAID: 'ERROR 1: Line 1140: AUTHENTICATE_IMAGE_FAILURE'
16:49:50: INFO: TARGET SAID: 'Failed to authenticate Digital Signature, resetting validation state'
16:49:50: INFO: TARGET SAID: 'ERROR 11: Line 790: DIGITAL_SIGNATURE_DID_NOT_PASS'
16:49:50: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
16:49:50: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
16:49:50: INFO: Something failed. The target rejected your <configure>. Please inspect log for more information
Writing log to 'C:\Users\pp\AppData\Roaming\Qualcomm\QFIL\COMPORT_5\port_trace.txt', might take a minute
Log is 'C:\Users\pp\AppData\Roaming\Qualcomm\QFIL\COMPORT_5\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download

Related

Unbrick LG G4 Brick hs-usb Qdloader 9008 Without Box H815 H818 H818N H818P H819 LS991

http://gsmmarhaba.com/threads/unbrick-lg-g4-brick-hs-usb-qdloader-9008-without-box.612/

Incomplete files. I need files for non-fused devices. With files for fused devices cant write to mmc.

Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
READBACKMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice
RAWPROGRAM file path: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\rawprogram0.xml
PATCH file path:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\patch0.xml
Programmer Path:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\prog_emmc_firehose_8992_lite.mbn
Start Download
Program Path:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\prog_emmc_firehose_8992_lite.mbn
COM Port number:38
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:38
Sending NOP
FireHose Log: Binary build date: Mar 3 2015 @ 19:29:19
FireHose Log: fh.attrs.Verbose is set to 0
FireHose Log: Chip serial num: 12649871 (0xc1058f)
FireHose Log: Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
FireHose NOP sent successfully
Sending Configuration
Device Type:eMMC
Platform:8x26
FireHose Log: Host's hash buffer size not provided or 0; using 8192
FireHose Log: fh.attrs.MaxPayloadSizeToTargetInBytes > FIREHOSE_CHANNEL_BUFFER_SIZE
FireHose Log: Calling hotplug_poll_device('MMC')
Invalid response NAK
Set TxBuffer 0x2000, RxBuffer 0x1000
Firehose configure packet sent successfully!
ReadBackMode:No_Readback
Disable read back
Total Bytes To Program 0x71316A0
Download Image
PROGRAM: Replace the partition sectors number 0x2b000 to file size in sector 0x2566d
PROGRAM: Partition 0, Sector: 32768, Length: 153197 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\NON-HLOS.bin
FireHose Log: start 32768, num 153197
FireHose Log: Finished sector address 185965
PROGRAM: Written Bytes 0x4acda00 (64)
Program Size: 74.80 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x4a
PROGRAM: Partition 0, Sector: 229376, Length: 74 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\pmic.mbn
FireHose Log: start 229376, num 74
FireHose Log: Finished sector address 229450
PROGRAM: Written Bytes 0x9400 (64)
Program Size: 0.04 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x511
PROGRAM: Partition 0, Sector: 230400, Length: 1297 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sbl1.mbn
FireHose Log: start 230400, num 1297
FireHose Log: Finished sector address 231697
PROGRAM: Written Bytes 0xa2200 (64)
Program Size: 0.63 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x449
PROGRAM: Partition 0, Sector: 232448, Length: 1097 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\tz.mbn
FireHose Log: start 232448, num 1097
FireHose Log: Finished sector address 233545
PROGRAM: Written Bytes 0x89200 (64)
Program Size: 0.54 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x38
PROGRAM: Partition 0, Sector: 234496, Length: 56 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sdi.mbn
FireHose Log: start 234496, num 56
FireHose Log: Finished sector address 234552
PROGRAM: Written Bytes 0x7000 (64)
Program Size: 0.03 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 235520, Length: 185 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\hyp.mbn
FireHose Log: start 235520, num 185
FireHose Log: Finished sector address 235705
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x176
PROGRAM: Partition 0, Sector: 236544, Length: 374 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\rpm.mbn
FireHose Log: start 236544, num 374
FireHose Log: Finished sector address 236918
PROGRAM: Written Bytes 0x2ec00 (64)
Program Size: 0.18 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x487
PROGRAM: Partition 0, Sector: 237568, Length: 1159 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\emmc_appsboot.mbn
FireHose Log: start 237568, num 1159
FireHose Log: Finished sector address 238727
PROGRAM: Written Bytes 0x90e00 (64)
Program Size: 0.57 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x511
PROGRAM: Partition 0, Sector: 241664, Length: 1297 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sbl1.mbn
FireHose Log: start 241664, num 1297
FireHose Log: Finished sector address 242961
PROGRAM: Written Bytes 0xa2200 (64)
Program Size: 0.63 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x4a
PROGRAM: Partition 0, Sector: 243712, Length: 74 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\pmic.mbn
FireHose Log: start 243712, num 74
FireHose Log: Finished sector address 243786
PROGRAM: Written Bytes 0x9400 (64)
Program Size: 0.04 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x449
PROGRAM: Partition 0, Sector: 244736, Length: 1097 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\tz.mbn
FireHose Log: start 244736, num 1097
FireHose Log: Finished sector address 245833
PROGRAM: Written Bytes 0x89200 (64)
Program Size: 0.54 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 246784, Length: 185 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\hyp.mbn
FireHose Log: start 246784, num 185
FireHose Log: Finished sector address 246969
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x176
PROGRAM: Partition 0, Sector: 247808, Length: 374 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\rpm.mbn
FireHose Log: start 247808, num 374
FireHose Log: Finished sector address 248182
PROGRAM: Written Bytes 0x2ec00 (64)
Program Size: 0.18 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x487
PROGRAM: Partition 0, Sector: 248832, Length: 1159 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\emmc_appsboot.mbn
FireHose Log: start 248832, num 1159
FireHose Log: Finished sector address 249991
PROGRAM: Written Bytes 0x90e00 (64)
Program Size: 0.57 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x38
PROGRAM: Partition 0, Sector: 252928, Length: 56 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sdi.mbn
FireHose Log: start 252928, num 56
FireHose Log: Finished sector address 252984
PROGRAM: Written Bytes 0x7000 (64)
Program Size: 0.03 MB
PROGRAM: Replace the partition sectors number 0x18000 to file size in sector 0x1228c
PROGRAM: Partition 0, Sector: 393216, Length: 74380 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\laf.img
FireHose Log: start 393216, num 74380
FireHose Log: Finished sector address 467596
PROGRAM: Written Bytes 0x2451800 (64)
Program Size: 36.32 MB
Total Size: 115.26 MB
Total Time: 55 Seconds
Throughput: 2.10 MB/Seconds
PATCH: Partition 0, Sector: 14, Offset 296 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 14 with 03A3DFDE
PATCH: Partition 0, Sector: 0, Offset 296 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071339 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 1 with 03A3DFDE
PATCH: Partition 0, Sector: 0, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071359 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 32 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 1 with 03A3DFFF
PATCH: Partition 0, Sector: 0, Offset 24 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 61071359 with 03A3DFFF
PATCH: Partition 0, Sector: 0, Offset 72 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-33.
FireHose Log: Patched sector 61071359 with 03A3DFDF
PATCH: Partition 0, Sector: 1, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(2,6656)
FireHose Log: crc start sector 2, over bytes 6656
FireHose Log: Patched sector 1 with C982465E
PATCH: Partition 0, Sector: 0, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-33.,6656)
FireHose Log: crc start sector 61071327, over bytes 6656
FireHose Log: Patched sector 61071359 with C982465E
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 1 with 00000000
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(1,92)
FireHose Log: crc start sector 1, over bytes 92
FireHose Log: Patched sector 1 with 7D166608
PATCH: Partition 0, Sector: 0, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 61071359 with 00000000
PATCH: Partition 0, Sector: 0, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-1.,92)
FireHose Log: crc start sector 61071359, over bytes 92
FireHose Log: Patched sector 61071359 with C1393600
Total download file size: 115.2642MB
Total download time: 55 Sec
Throughput: 2.071975MB/s
Download Succeed
Finish Download

aaya888 said:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
READBACKMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice
RAWPROGRAM file path: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\rawprogram0.xml
PATCH file path:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\patch0.xml
Programmer Path:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\prog_emmc_firehose_8992_lite.mbn
Start Download
Program Path:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\prog_emmc_firehose_8992_lite.mbn
COM Port number:38
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:38
Sending NOP
FireHose Log: Binary build date: Mar 3 2015 @ 19:29:19
FireHose Log: fh.attrs.Verbose is set to 0
FireHose Log: Chip serial num: 12649871 (0xc1058f)
FireHose Log: Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
FireHose NOP sent successfully
Sending Configuration
Device Type:eMMC
Platform:8x26
FireHose Log: Host's hash buffer size not provided or 0; using 8192
FireHose Log: fh.attrs.MaxPayloadSizeToTargetInBytes > FIREHOSE_CHANNEL_BUFFER_SIZE
FireHose Log: Calling hotplug_poll_device('MMC')
Invalid response NAK
Set TxBuffer 0x2000, RxBuffer 0x1000
Firehose configure packet sent successfully!
ReadBackMode:No_Readback
Disable read back
Total Bytes To Program 0x71316A0
Download Image
PROGRAM: Replace the partition sectors number 0x2b000 to file size in sector 0x2566d
PROGRAM: Partition 0, Sector: 32768, Length: 153197 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\NON-HLOS.bin
FireHose Log: start 32768, num 153197
FireHose Log: Finished sector address 185965
PROGRAM: Written Bytes 0x4acda00 (64)
Program Size: 74.80 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x4a
PROGRAM: Partition 0, Sector: 229376, Length: 74 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\pmic.mbn
FireHose Log: start 229376, num 74
FireHose Log: Finished sector address 229450
PROGRAM: Written Bytes 0x9400 (64)
Program Size: 0.04 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x511
PROGRAM: Partition 0, Sector: 230400, Length: 1297 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sbl1.mbn
FireHose Log: start 230400, num 1297
FireHose Log: Finished sector address 231697
PROGRAM: Written Bytes 0xa2200 (64)
Program Size: 0.63 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x449
PROGRAM: Partition 0, Sector: 232448, Length: 1097 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\tz.mbn
FireHose Log: start 232448, num 1097
FireHose Log: Finished sector address 233545
PROGRAM: Written Bytes 0x89200 (64)
Program Size: 0.54 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x38
PROGRAM: Partition 0, Sector: 234496, Length: 56 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sdi.mbn
FireHose Log: start 234496, num 56
FireHose Log: Finished sector address 234552
PROGRAM: Written Bytes 0x7000 (64)
Program Size: 0.03 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 235520, Length: 185 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\hyp.mbn
FireHose Log: start 235520, num 185
FireHose Log: Finished sector address 235705
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x176
PROGRAM: Partition 0, Sector: 236544, Length: 374 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\rpm.mbn
FireHose Log: start 236544, num 374
FireHose Log: Finished sector address 236918
PROGRAM: Written Bytes 0x2ec00 (64)
Program Size: 0.18 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x487
PROGRAM: Partition 0, Sector: 237568, Length: 1159 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\emmc_appsboot.mbn
FireHose Log: start 237568, num 1159
FireHose Log: Finished sector address 238727
PROGRAM: Written Bytes 0x90e00 (64)
Program Size: 0.57 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x511
PROGRAM: Partition 0, Sector: 241664, Length: 1297 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sbl1.mbn
FireHose Log: start 241664, num 1297
FireHose Log: Finished sector address 242961
PROGRAM: Written Bytes 0xa2200 (64)
Program Size: 0.63 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x4a
PROGRAM: Partition 0, Sector: 243712, Length: 74 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\pmic.mbn
FireHose Log: start 243712, num 74
FireHose Log: Finished sector address 243786
PROGRAM: Written Bytes 0x9400 (64)
Program Size: 0.04 MB
PROGRAM: Replace the partition sectors number 0x800 to file size in sector 0x449
PROGRAM: Partition 0, Sector: 244736, Length: 1097 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\tz.mbn
FireHose Log: start 244736, num 1097
FireHose Log: Finished sector address 245833
PROGRAM: Written Bytes 0x89200 (64)
Program Size: 0.54 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 246784, Length: 185 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\hyp.mbn
FireHose Log: start 246784, num 185
FireHose Log: Finished sector address 246969
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x176
PROGRAM: Partition 0, Sector: 247808, Length: 374 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\rpm.mbn
FireHose Log: start 247808, num 374
FireHose Log: Finished sector address 248182
PROGRAM: Written Bytes 0x2ec00 (64)
Program Size: 0.18 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x487
PROGRAM: Partition 0, Sector: 248832, Length: 1159 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\emmc_appsboot.mbn
FireHose Log: start 248832, num 1159
FireHose Log: Finished sector address 249991
PROGRAM: Written Bytes 0x90e00 (64)
Program Size: 0.57 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0x38
PROGRAM: Partition 0, Sector: 252928, Length: 56 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\sdi.mbn
FireHose Log: start 252928, num 56
FireHose Log: Finished sector address 252984
PROGRAM: Written Bytes 0x7000 (64)
Program Size: 0.03 MB
PROGRAM: Replace the partition sectors number 0x18000 to file size in sector 0x1228c
PROGRAM: Partition 0, Sector: 393216, Length: 74380 Sectors, Sector Size: 512 Bytes
File: D:\LGMOBILEAX\dump file\g4\g4 9008\g4 9008\H815_Recovery\H815_Recovery\H815_Recovery\H815_ForFusingDevice\laf.img
FireHose Log: start 393216, num 74380
FireHose Log: Finished sector address 467596
PROGRAM: Written Bytes 0x2451800 (64)
Program Size: 36.32 MB
Total Size: 115.26 MB
Total Time: 55 Seconds
Throughput: 2.10 MB/Seconds
PATCH: Partition 0, Sector: 14, Offset 296 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 14 with 03A3DFDE
PATCH: Partition 0, Sector: 0, Offset 296 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071339 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 1 with 03A3DFDE
PATCH: Partition 0, Sector: 0, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071359 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 32 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 1 with 03A3DFFF
PATCH: Partition 0, Sector: 0, Offset 24 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 61071359 with 03A3DFFF
PATCH: Partition 0, Sector: 0, Offset 72 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-33.
FireHose Log: Patched sector 61071359 with 03A3DFDF
PATCH: Partition 0, Sector: 1, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(2,6656)
FireHose Log: crc start sector 2, over bytes 6656
FireHose Log: Patched sector 1 with C982465E
PATCH: Partition 0, Sector: 0, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-33.,6656)
FireHose Log: crc start sector 61071327, over bytes 6656
FireHose Log: Patched sector 61071359 with C982465E
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 1 with 00000000
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(1,92)
FireHose Log: crc start sector 1, over bytes 92
FireHose Log: Patched sector 1 with 7D166608
PATCH: Partition 0, Sector: 0, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 61071359 with 00000000
PATCH: Partition 0, Sector: 0, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-1.,92)
FireHose Log: crc start sector 61071359, over bytes 92
FireHose Log: Patched sector 61071359 with C1393600
Total download file size: 115.2642MB
Total download time: 55 Sec
Throughput: 2.071975MB/s
Download Succeed
Finish Download
Click to expand...
Click to collapse
Hi, which exact version of QSPT did you use? I used build 437 but I have error with too long time of COM port opening.
With build 425 I had error "device is not in firehose mode". Or maybe you have changed some firehose settings?
Thanks in advance for the answer.

h818p
Validating Application Configuration
Load APP Configuration
COM:3
SAHARA:True
SAHARA:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
PATCH file path ignored: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:3
Sending NOP
FireHose Log: Binary build date: Mar 3 2015 @ 19:29:19
FireHose Log: fh.attrs.Verbose is set to 0
FireHose Log: Chip serial num: 3364918 (0x335836)
FireHose Log: Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
FireHose NOP sent successfully
Sending Configuration
Device Type:eMMC
Platform:8x26
FireHose Log: Host's hash buffer size not provided or 0; using 8192
FireHose Log: fh.attrs.MaxPayloadSizeToTargetInBytes > FIREHOSE_CHANNEL_BUFFER_SIZE
FireHose Log: Calling hotplug_poll_device('MMC')
Invalid response NAK
Set TxBuffer 0x2000, RxBuffer 0x1000
Firehose configure packet sent successfully!
ReadBackMode:No_Readback
Disable read back
Total Bytes To Program 0x29912A0
Download Image
PROGRAM: Partition 0, Sector: 229376, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\pmic.mbn
FireHose Log: start 229376, num 1024
FireHose Log: Finished sector address 230400
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Partition 0, Sector: 230400, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sbl1.mbn
FireHose Log: start 230400, num 2048
FireHose Log: Finished sector address 232448
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 232448, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\tz.mbn
FireHose Log: start 232448, num 2048
FireHose Log: Finished sector address 234496
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 234496, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sdi.mbn
FireHose Log: start 234496, num 1024
FireHose Log: Finished sector address 235520
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 235520, Length: 185 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\hyp.mbn
FireHose Log: start 235520, num 185
FireHose Log: Finished sector address 235705
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Partition 0, Sector: 236544, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rpm.mbn
FireHose Log: start 236544, num 1024
FireHose Log: Finished sector address 237568
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x461
PROGRAM: Partition 0, Sector: 237568, Length: 1121 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\emmc_appsboot.mbn
FireHose Log: start 237568, num 1121
FireHose Log: Finished sector address 238689
PROGRAM: Written Bytes 0x8c200 (64)
Program Size: 0.55 MB
PROGRAM: Partition 0, Sector: 241664, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sbl1.mbn
FireHose Log: start 241664, num 2048
FireHose Log: Finished sector address 243712
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 243712, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\pmic.mbn
FireHose Log: start 243712, num 1024
FireHose Log: Finished sector address 244736
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Partition 0, Sector: 244736, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\tz.mbn
FireHose Log: start 244736, num 2048
FireHose Log: Finished sector address 246784
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 246784, Length: 185 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\hyp.mbn
FireHose Log: start 246784, num 185
FireHose Log: Finished sector address 246969
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Partition 0, Sector: 247808, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rpm.mbn
FireHose Log: start 247808, num 1024
FireHose Log: Finished sector address 248832
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x461
PROGRAM: Partition 0, Sector: 248832, Length: 1121 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\emmc_appsboot.mbn
FireHose Log: start 248832, num 1121
FireHose Log: Finished sector address 249953
PROGRAM: Written Bytes 0x8c200 (64)
Program Size: 0.55 MB
PROGRAM: Partition 0, Sector: 252928, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sdi.mbn
FireHose Log: start 252928, num 1024
FireHose Log: Finished sector address 253952
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x18000 to file size in sector 0x12b2c
PROGRAM: Partition 0, Sector: 393216, Length: 76588 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\laf.img
FireHose Log: start 393216, num 76588
FireHose Log: Finished sector address 469804
PROGRAM: Written Bytes 0x2565800 (64)
Program Size: 37.40 MB
PROGRAM: Partition 0, Sector: 0, Length: 34 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\gpt_main0.bin
FireHose Log: start 0, num 34
FireHose Log: Finished sector address 34
PROGRAM: Written Bytes 0x4400 (64)
Program Size: 0.02 MB
PROGRAM: Partition 0, Sector: NUM_DISK_SECTORS-33., Length: 33 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\gpt_backup0.bin
FireHose Log: start 61071327, num 33
FireHose Log: Finished sector address 61071360
PROGRAM: Written Bytes 0x4200 (64)
Program Size: 0.02 MB
Total Size: 45.70 MB
Total Time: 12 Seconds
Throughput: 3.81 MB/Seconds
PATCH: Partition 0, Sector: 15, Offset 424 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 15 with 03A3DFDE
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-20., Offset 424 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071340 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 1 with 03A3DFDE
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071359 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 32 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 1 with 03A3DFFF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 24 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 61071359 with 03A3DFFF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1, Offset 72 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-33.
FireHose Log: Patched sector 61071359 with 03A3DFDF
PATCH: Partition 0, Sector: 1, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(2,7168)
FireHose Log: crc start sector 2, over bytes 7168
FireHose Log: Patched sector 1 with C75ADFEF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-33.,7168)
FireHose Log: crc start sector 61071327, over bytes 7168
FireHose Log: Patched sector 61071359 with C75ADFEF
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 1 with 00000000
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(1,92)
FireHose Log: crc start sector 1, over bytes 92
FireHose Log: Patched sector 1 with 8149E319
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 61071359 with 00000000
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-1.,92)
FireHose Log: crc start sector 61071359, over bytes 92
FireHose Log: Patched sector 61071359 with 3D66B311
Total download file size: 45.70459MB
Total download time: 12 Sec
Throughput: 3.706868MB/s
Download Succeed
Finish Download

ls991
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage
RAWPROGRAM file path: C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\patch0.xml
Programmer Path:C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\prog_emmc_firehose_8992_lite.mbn
Process Index:0
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\prog_emmc_firehose_8992_lite.mbn
22:21:30: Requested ID 13, file: "C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\prog_emmc_firehose_8992_lite.mbn"
22:21:30: 273568 bytes transferred in 0.078000 seconds (3.3448MBps)
22:21:30: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
22:21:30: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
22:21:34: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
22:21:34: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
22:21:34: INFO: Showing network mappings to allow debugging
22:21:34: INFO:
22:21:34: INFO: Trying to store 'rawprogram0.xml' in string table
22:21:34: INFO: Looking for file 'rawprogram0.xml'
22:21:34: INFO: User wants to talk to port '\\.\COM4'
22:21:34: INFO: Took 0.00000000 seconds to open port
22:21:34: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
22:21:34: INFO: If you don't want this, use --dontsorttags
22:21:34: INFO: Looking for file 'pmic.mbn'
22:21:34: INFO: Looking for file 'sbl1.mbn'
22:21:34: INFO: Looking for file 'tz.mbn'
22:21:34: INFO: Looking for file 'sdi.mbn'
22:21:34: INFO: Looking for file 'hyp.mbn'
22:21:34: INFO: Looking for file 'rpm.mbn'
22:21:34: INFO: Looking for file 'emmc_appsboot.mbn'
22:21:34: INFO: Looking for file 'laf.img'
22:21:34: INFO: Looking for file 'gpt_main0.bin'
22:21:34: INFO: Looking for file 'gpt_backup0.bin'
22:21:34: INFO:
Total to be tansferd with <program> or <read> is 39.71 MB
22:21:34: INFO: Sending <configure>
22:21:34: INFO: TARGET SAID: 'Binary build date: Mar 3 2015 @ 19:29:19'
22:21:34: INFO: TARGET SAID: 'Chip serial num: 3364918 (0x335836)'
22:21:34: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
22:21:34: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
22:21:34: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
22:21:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
22:21:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
22:21:34: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
22:21:34: INFO: In handleProgram('pmic.mbn')
22:21:34: INFO: Looking for file 'pmic.mbn'
22:21:34: INFO: =======================================================
22:21:34: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\pmic.mbn'}
22:21:34: INFO: {<program> (36.73 KB) 74 sectors needed at location 229376 on LUN 0}
22:21:34: INFO: =======================================================
22:21:35: INFO: TARGET SAID: 'start 229376, num 74'
22:21:35: INFO: FILE ACCESS SLOW!! 37.00 KB in 0.015 seconds ( 2.41 MBps) --- Overall to target 0.010 seconds (3.61 MBps)
22:21:35: INFO: {percent files transferred 0.09%}
22:21:35: INFO: TARGET SAID: 'Finished sector address 229450'
22:21:35: INFO:
22:21:35: INFO: =======================================================
22:21:35: INFO: ==================== {SUCCESS} ========================
22:21:35: INFO: =======================================================
22:21:35: INFO: {percent files transferred 0.09%}
22:21:35: INFO: In handleProgram('sbl1.mbn')
22:21:35: INFO: Looking for file 'sbl1.mbn'
22:21:35: INFO: =======================================================
22:21:35: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\sbl1.mbn'}
22:21:35: INFO: {<program> (575.50 KB) 1151 sectors needed at location 230400 on LUN 0}
22:21:35: INFO: =======================================================
22:21:35: INFO: TARGET SAID: 'start 230400, num 1151'
22:21:35: INFO: FILE ACCESS SLOW!! 575.50 KB in 0.015 seconds ( 37.47 MBps) --- Overall to target 0.156 seconds (3.60 MBps)
22:21:35: INFO: {percent files transferred 1.51%}
22:21:35: INFO: TARGET SAID: 'Finished sector address 231551'
22:21:35: INFO:
22:21:35: INFO: =======================================================
22:21:35: INFO: ==================== {SUCCESS} ========================
22:21:35: INFO: =======================================================
22:21:35: INFO: {percent files transferred 1.51%}
22:21:35: INFO: In handleProgram('tz.mbn')
22:21:35: INFO: Looking for file 'tz.mbn'
22:21:35: INFO: =======================================================
22:21:35: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\tz.mbn'}
22:21:35: INFO: {<program> (560.20 KB) 1121 sectors needed at location 232448 on LUN 0}
22:21:35: INFO: =======================================================
22:21:35: INFO: TARGET SAID: 'start 232448, num 1121'
22:21:35: INFO: FILE ACCESS SLOW!! 560.50 KB in 0.015 seconds ( 36.49 MBps) --- Overall to target 0.156 seconds (3.51 MBps)
22:21:35: INFO: {percent files transferred 2.88%}
22:21:35: INFO: TARGET SAID: 'Finished sector address 233569'
22:21:35: INFO:
22:21:35: INFO: =======================================================
22:21:35: INFO: ==================== {SUCCESS} ========================
22:21:35: INFO: =======================================================
22:21:35: INFO: {percent files transferred 2.88%}
22:21:35: INFO: In handleProgram('sdi.mbn')
22:21:35: INFO: Looking for file 'sdi.mbn'
22:21:35: INFO: =======================================================
22:21:35: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\sdi.mbn'}
22:21:35: INFO: {<program> (27.88 KB) 56 sectors needed at location 234496 on LUN 0}
22:21:35: INFO: =======================================================
22:21:36: INFO: TARGET SAID: 'start 234496, num 56'
22:21:36: INFO: FILE ACCESS SLOW!! 28.00 KB in 0.015 seconds ( 1.82 MBps) --- Overall to target 0.010 seconds (2.73 MBps)
22:21:36: INFO: {percent files transferred 2.95%}
22:21:36: INFO: TARGET SAID: 'Finished sector address 234552'
22:21:36: INFO:
22:21:36: INFO: =======================================================
22:21:36: INFO: ==================== {SUCCESS} ========================
22:21:36: INFO: =======================================================
22:21:36: INFO: {percent files transferred 2.95%}
22:21:36: INFO: In handleProgram('hyp.mbn')
22:21:36: INFO: Looking for file 'hyp.mbn'
22:21:36: INFO: =======================================================
22:21:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\hyp.mbn'}
22:21:36: INFO: {<program> (92.30 KB) 185 sectors needed at location 235520 on LUN 0}
22:21:36: INFO: =======================================================
22:21:36: INFO: TARGET SAID: 'start 235520, num 185'
22:21:36: INFO: FILE ACCESS SLOW!! 92.50 KB in 0.015 seconds ( 6.02 MBps) --- Overall to target 0.063 seconds (1.43 MBps)
22:21:36: INFO: {percent files transferred 3.18%}
22:21:36: INFO: TARGET SAID: 'Finished sector address 235705'
22:21:36: INFO:
22:21:36: INFO: =======================================================
22:21:36: INFO: ==================== {SUCCESS} ========================
22:21:36: INFO: =======================================================
22:21:36: INFO: {percent files transferred 3.18%}
22:21:36: INFO: In handleProgram('rpm.mbn')
22:21:36: INFO: Looking for file 'rpm.mbn'
22:21:36: INFO: =======================================================
22:21:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\rpm.mbn'}
22:21:36: INFO: {<program> (187.04 KB) 375 sectors needed at location 236544 on LUN 0}
22:21:36: INFO: =======================================================
22:21:36: INFO: TARGET SAID: 'start 236544, num 375'
22:21:36: INFO: FILE ACCESS SLOW!! 187.50 KB in 0.015 seconds ( 12.21 MBps) --- Overall to target 0.062 seconds (2.95 MBps)
22:21:36: INFO: {percent files transferred 3.64%}
22:21:36: INFO: TARGET SAID: 'Finished sector address 236919'
22:21:36: INFO:
22:21:36: INFO: =======================================================
22:21:36: INFO: ==================== {SUCCESS} ========================
22:21:36: INFO: =======================================================
22:21:36: INFO: {percent files transferred 3.64%}
22:21:36: INFO: In handleProgram('emmc_appsboot.mbn')
22:21:36: INFO: Looking for file 'emmc_appsboot.mbn'
22:21:36: INFO: =======================================================
22:21:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\emmc_appsboot.mbn'}
22:21:36: INFO: {<program> (635.64 KB) 1272 sectors needed at location 237568 on LUN 0}
22:21:36: INFO: =======================================================
22:21:36: INFO: TARGET SAID: 'start 237568, num 1272'
22:21:36: INFO: FILE ACCESS SLOW!! 636.00 KB in 0.015 seconds ( 41.41 MBps) --- Overall to target 0.218 seconds (2.85 MBps)
22:21:36: INFO: {percent files transferred 5.20%}
22:21:37: INFO: TARGET SAID: 'Finished sector address 238840'
22:21:37: INFO:
22:21:37: INFO: =======================================================
22:21:37: INFO: ==================== {SUCCESS} ========================
22:21:37: INFO: =======================================================
22:21:37: INFO: {percent files transferred 5.20%}
22:21:37: INFO: In handleProgram('laf.img')
22:21:37: INFO: Looking for file 'laf.img'
22:21:37: INFO: =======================================================
22:21:37: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\laf.img'}
22:21:37: INFO: {<program> (37.62 MB) 77036 sectors needed at location 393216 on LUN 0}
22:21:37: INFO: =======================================================
22:21:37: INFO: TARGET SAID: 'start 393216, num 77036'
22:21:39: INFO: FILE ACCESS SLOW!! 7.70 MB in 0.187 seconds ( 41.15 MBps) --- Overall to target 2.012 seconds (3.82 MBps)
22:21:39: INFO: {percent files transferred 24.58%}
22:21:41: INFO: FILE ACCESS SLOW!! 15.93 MB in 0.218 seconds ( 73.07 MBps) --- Overall to target 4.025 seconds (3.96 MBps)
22:21:41: INFO: {percent files transferred 45.31%}
22:21:43: INFO: FILE ACCESS SLOW!! 23.66 MB in 0.390 seconds ( 60.66 MBps) --- Overall to target 6.037 seconds (3.92 MBps)
22:21:43: INFO: {percent files transferred 64.77%}
22:21:45: INFO: FILE ACCESS SLOW!! 31.86 MB in 0.437 seconds ( 72.90 MBps) --- Overall to target 8.050 seconds (3.96 MBps)
22:21:45: INFO: {percent files transferred 85.42%}
22:21:46: INFO: Overall to target 9.438 seconds (3.99 MBps)
22:21:46: INFO: {percent files transferred 99.92%}
22:21:46: INFO: TARGET SAID: 'Finished sector address 470252'
22:21:46: INFO:
22:21:46: INFO: =======================================================
22:21:46: INFO: ==================== {SUCCESS} ========================
22:21:46: INFO: =======================================================
22:21:46: INFO: {percent files transferred 99.92%}
22:21:46: INFO: In handleProgram('gpt_main0.bin')
22:21:46: INFO: Looking for file 'gpt_main0.bin'
22:21:46: INFO: =======================================================
22:21:46: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\gpt_main0.bin'}
22:21:46: INFO: {<program> (17.00 KB) 34 sectors needed at location 0 on LUN 0}
22:21:46: INFO: =======================================================
22:21:46: INFO: TARGET SAID: 'start 0, num 34'
22:21:46: INFO: FILE ACCESS SLOW!! 17.00 KB in 0.015 seconds ( 1.11 MBps) --- Overall to target 0.010 seconds (1.66 MBps)
22:21:46: INFO: {percent files transferred 99.96%}
22:21:46: INFO: TARGET SAID: 'Finished sector address 34'
22:21:46: INFO:
22:21:46: INFO: =======================================================
22:21:46: INFO: ==================== {SUCCESS} ========================
22:21:46: INFO: =======================================================
22:21:46: INFO: {percent files transferred 99.96%}
22:21:46: INFO: In handleProgram('gpt_backup0.bin')
22:21:46: INFO: Looking for file 'gpt_backup0.bin'
22:21:46: INFO: =======================================================
22:21:46: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\gpt_backup0.bin'}
22:21:46: INFO: {<program> (16.50 KB) 33 sectors needed at location 0 on LUN 0}
22:21:46: INFO: =======================================================
22:21:47: INFO: TARGET SAID: 'start 61071327, num 33'
22:21:47: INFO: FILE ACCESS SLOW!! 16.50 KB in 0.015 seconds ( 1.07 MBps) --- Overall to target 0.010 seconds (1.61 MBps)
22:21:47: INFO: {percent files transferred 100.00%}
22:21:47: INFO: TARGET SAID: 'Finished sector address 61071360'
22:21:47: INFO:
22:21:47: INFO: =======================================================
22:21:47: INFO: ==================== {SUCCESS} ========================
22:21:47: INFO: =======================================================
22:21:47: INFO: {percent files transferred 100.00%}
22:21:47: INFO: ==============================================================
22:21:47: INFO: Files used and their paths
22:21:47: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
22:21:47: INFO: 2 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\rawprogram0.xml'
22:21:47: INFO: 3 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\pmic.mbn'
22:21:47: INFO: 4 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\sbl1.mbn'
22:21:47: INFO: 5 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\tz.mbn'
22:21:47: INFO: 6 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\sdi.mbn'
22:21:47: INFO: 7 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\hyp.mbn'
22:21:47: INFO: 8 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\rpm.mbn'
22:21:47: INFO: 9 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\emmc_appsboot.mbn'
22:21:47: INFO: 10 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\laf.img'
22:21:47: INFO: 11 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\gpt_main0.bin'
22:21:47: INFO: 12 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\gpt_backup0.bin'
22:21:47: INFO: _ (done)
22:21:47: INFO: | |
22:21:47: INFO: __| | ___ _ __ ___
22:21:47: INFO: / _` |/ _ \| '_ \ / _ \
22:21:47: INFO: | (_| | (_) | | | | __/
22:21:47: INFO: \__,_|\___/|_| |_|\___|
22:21:47: INFO: {All Finished Successfully}
22:21:47: INFO: Overall to target 13.042 seconds (3.05 MBps)
22:21:47: INFO: {percent files transferred 100.00%}
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
22:21:47: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=patch0.xml --search_path=C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
22:21:47: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
22:21:47: INFO: Showing network mappings to allow debugging
22:21:47: INFO:
22:21:47: INFO: Trying to store 'patch0.xml' in string table
22:21:47: INFO: Looking for file 'patch0.xml'
22:21:47: INFO: User wants to talk to port '\\.\COM4'
22:21:47: INFO: Took 0.00000000 seconds to open port
22:21:47: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
22:21:47: INFO: If you don't want this, use --dontsorttags
22:21:47: INFO: Sending <configure>
22:21:47: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
22:21:47: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
22:21:47: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
22:21:47: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
22:21:47: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
22:21:47: INFO: TARGET SAID: 'Patched sector 15 with 03A3DFDE'
22:21:47: INFO: TARGET SAID: 'Patched sector 61071340 with 03A3DFDE'
22:21:48: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFDE'
22:21:48: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDE'
22:21:48: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFFF'
22:21:48: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFFF'
22:21:48: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDF'
22:21:48: INFO: TARGET SAID: 'crc start sector 2, over bytes 7168'
22:21:48: INFO: TARGET SAID: 'Patched sector 1 with DA92707B'
22:21:48: INFO: TARGET SAID: 'crc start sector 61071327, over bytes 7168'
22:21:48: INFO: TARGET SAID: 'Patched sector 61071359 with DA92707B'
22:21:48: INFO: TARGET SAID: 'Patched sector 1 with 00000000'
22:21:48: INFO: TARGET SAID: 'crc start sector 1, over bytes 92'
22:21:48: INFO: TARGET SAID: 'Patched sector 1 with 016ABE28'
22:21:49: INFO: TARGET SAID: 'Patched sector 61071359 with 00000000'
22:21:49: INFO: TARGET SAID: 'crc start sector 61071359, over bytes 92'
22:21:49: INFO: TARGET SAID: 'Patched sector 61071359 with BD45EE20'
22:21:49: INFO: ==============================================================
22:21:49: INFO: Files used and their paths
22:21:49: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
22:21:49: INFO: 2 'C:\Users\aaya\Desktop\g4 unbrick\LS991_ARB_02_RecoveryImage\LS991_ARB_02_RecoveryImage\patch0.xml'
22:21:49: INFO: _ (done)
22:21:49: INFO: | |
22:21:49: INFO: __| | ___ _ __ ___
22:21:49: INFO: / _` |/ _ \| '_ \ / _ \
22:21:49: INFO: | (_| | (_) | | | | __/
22:21:49: INFO: \__,_|\___/|_| |_|\___|
22:21:49: INFO: {All Finished Successfully}
22:21:49: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 1.435 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
22:21:49: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC --setactivepartition=0
************************************************
22:21:49: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
22:21:49: INFO: Showing network mappings to allow debugging
22:21:49: INFO: User wants to talk to port '\\.\COM4'
22:21:49: INFO: Took 0.00000000 seconds to open port
22:21:49: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
22:21:49: INFO: If you don't want this, use --dontsorttags
22:21:49: INFO: Sending <configure>
22:21:49: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
22:21:49: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
22:21:49: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
22:21:49: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
22:21:49: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
22:21:49: INFO: Sending <setbootablestoragedrive>
22:21:49: INFO: ==============================================================
22:21:49: INFO: Files used and their paths
22:21:49: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
22:21:49: INFO: _ (done)
22:21:49: INFO: | |
22:21:49: INFO: __| | ___ _ __ ___
22:21:49: INFO: / _` |/ _ \| '_ \ / _ \
22:21:49: INFO: | (_| | (_) | | | | __/
22:21:49: INFO: \__,_|\___/|_| |_|\___|
22:21:49: INFO: {All Finished Successfully}
22:21:49: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 0.203 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Succeed
Finish Download

lg f500l kdz exrackt rawprogram0.xml fix done
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:C:\Users\aaya\Desktop\f500l recovery\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\Users\aaya\Desktop\f500l recovery
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\Users\aaya\Desktop\f500l recovery
RAWPROGRAM file path: C:\Users\aaya\Desktop\f500l recovery\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\f500l recovery\patch0.xml
Programmer Path:C:\Users\aaya\Desktop\f500l recovery\prog_emmc_firehose_8992_lite.mbn
Process Index:0
Image Search Path: C:\Users\aaya\Desktop\f500l recovery
RAWPROGRAM file path: C:\Users\aaya\Desktop\f500l recovery\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\f500l recovery\patch0.xml
Start Download
Program Path:C:\Users\aaya\Desktop\f500l recovery\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\aaya\Desktop\f500l recovery\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\aaya\Desktop\f500l recovery\prog_emmc_firehose_8992_lite.mbn
16:11:35: Requested ID 13, file: "C:\Users\aaya\Desktop\f500l recovery\prog_emmc_firehose_8992_lite.mbn"
16:11:35: 273568 bytes transferred in 0.062000 seconds (4.2080MBps)
16:11:35: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
16:11:35: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:11:38: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\aaya\Desktop\f500l recovery --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
16:11:38: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:11:38: INFO: Showing network mappings to allow debugging
16:11:38: INFO:
16:11:38: INFO: Trying to store 'rawprogram0.xml' in string table
16:11:38: INFO: Looking for file 'rawprogram0.xml'
16:11:38: INFO: User wants to talk to port '\\.\COM4'
16:11:38: INFO: Took 0.00000000 seconds to open port
16:11:38: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:11:38: INFO: If you don't want this, use --dontsorttags
16:11:38: INFO: Looking for file 'PrimaryGPT.bin'
16:11:39: INFO: Looking for file 'modem.bin'
16:11:39: INFO: Looking for file 'sbl1.bin'
16:11:39: INFO: Looking for file 'rpm.bin'
16:11:39: INFO: Looking for file 'tz.bin'
16:11:39: INFO: Looking for file 'sdi.bin'
16:11:39: INFO: Looking for file 'aboot.bin'
16:11:39: INFO: Looking for file 'rpmbak.bin'
16:11:39: INFO: Looking for file 'tzbak.bin'
16:11:39: INFO: Looking for file 'abootbak.bin'
16:11:39: INFO: Looking for file 'persist.bin'
16:11:39: INFO: Looking for file 'laf.bin'
16:11:39: INFO: Looking for file 'boot.bin'
16:11:39: INFO: Looking for file 'recovery.bin'
16:11:39: INFO: Looking for file 'factory.bin'
16:11:39: INFO: Looking for file 'sbl1bak.bin'
16:11:39: INFO: Looking for file 'hyp.bin'
16:11:40: INFO: Looking for file 'BackupGPT.bin'
16:11:40: INFO:
Total to be tansferd with <program> or <read> is 220.50 MB
16:11:40: INFO: Sending <configure>
16:11:40: INFO: TARGET SAID: 'Binary build date: Mar 3 2015 @ 19:29:19'
16:11:40: INFO: TARGET SAID: 'Chip serial num: 3364918 (0x335836)'
16:11:40: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
16:11:40: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:11:40: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:11:40: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:11:40: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:11:40: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:11:40: INFO: In handleProgram('PrimaryGPT.bin')
16:11:40: INFO: Looking for file 'PrimaryGPT.bin'
16:11:40: INFO: =======================================================
16:11:40: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\PrimaryGPT.bin'}
16:11:40: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:11:40: INFO: =======================================================
16:11:40: INFO: TARGET SAID: 'start 8000, num 1024'
16:11:40: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:11:40: INFO: {percent files transferred 0.23%}
16:11:40: INFO: TARGET SAID: 'Finished sector address 9024'
16:11:40: INFO:
16:11:40: INFO: =======================================================
16:11:40: INFO: ==================== {SUCCESS} ========================
16:11:40: INFO: =======================================================
16:11:40: INFO: {percent files transferred 0.23%}
16:11:40: INFO: In handleProgram('modem.bin')
16:11:40: INFO: Looking for file 'modem.bin'
16:11:40: INFO: =======================================================
16:11:40: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\modem.bin'}
16:11:40: INFO: {<program> (74.00 MB) 151552 sectors needed at location 0 on LUN 0}
16:11:40: INFO: =======================================================
16:11:40: INFO: TARGET SAID: 'start 30000, num 151552'
16:11:42: INFO: Overall to target 2.012 seconds (4.15 MBps)
16:11:42: INFO: {percent files transferred 4.01%}
16:11:44: INFO: Overall to target 4.024 seconds (4.11 MBps)
16:11:44: INFO: {percent files transferred 7.72%}
16:11:46: INFO: Overall to target 6.037 seconds (4.11 MBps)
16:11:46: INFO: {percent files transferred 11.48%}
16:11:48: INFO: Overall to target 8.049 seconds (4.10 MBps)
16:11:48: INFO: {percent files transferred 15.19%}
16:11:50: INFO: Overall to target 10.062 seconds (4.11 MBps)
16:11:50: INFO: {percent files transferred 18.97%}
16:11:52: INFO: Overall to target 12.074 seconds (4.11 MBps)
16:11:52: INFO: {percent files transferred 22.73%}
16:11:54: INFO: Overall to target 14.087 seconds (4.11 MBps)
16:11:54: INFO: {percent files transferred 26.51%}
16:11:56: INFO: Overall to target 16.099 seconds (4.12 MBps)
16:11:56: INFO: {percent files transferred 30.27%}
16:11:58: INFO: Overall to target 17.955 seconds (4.12 MBps)
16:11:58: INFO: {percent files transferred 33.79%}
16:11:58: INFO: TARGET SAID: 'Finished sector address 181552'
16:11:58: INFO:
16:11:58: INFO: =======================================================
16:11:58: INFO: ==================== {SUCCESS} ========================
16:11:58: INFO: =======================================================
16:11:58: INFO: {percent files transferred 33.79%}
16:11:58: INFO: In handleProgram('sbl1.bin')
16:11:58: INFO: Looking for file 'sbl1.bin'
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
16:11:58: WARNING: User requested to ONLY program num_partition_sectors 1024 of 'sbl1.bin' (512.00 KB).
To load this file completely would require 2048 sectors (1.00 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
16:11:58: INFO: =======================================================
16:11:58: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\sbl1.bin'}
16:11:58: INFO: {<program> (1.00 MB) 1024 sectors needed at location 0 on LUN 0}
16:11:58: INFO: =======================================================
16:11:58: INFO: TARGET SAID: 'start 800, num 1024'
16:11:58: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:11:58: INFO: {percent files transferred 34.01%}
16:11:59: INFO: TARGET SAID: 'Finished sector address 1824'
16:11:59: INFO:
16:11:59: INFO: =======================================================
16:11:59: INFO: ==================== {SUCCESS} ========================
16:11:59: INFO: =======================================================
16:11:59: INFO: {percent files transferred 34.01%}
16:11:59: INFO: In handleProgram('rpm.bin')
16:11:59: INFO: Looking for file 'rpm.bin'
16:11:59: INFO: =======================================================
16:11:59: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\rpm.bin'}
16:11:59: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:11:59: INFO: =======================================================
16:11:59: INFO: TARGET SAID: 'start 400, num 1024'
16:11:59: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:11:59: INFO: {percent files transferred 34.24%}
16:11:59: INFO: TARGET SAID: 'Finished sector address 1424'
16:11:59: INFO:
16:11:59: INFO: =======================================================
16:11:59: INFO: ==================== {SUCCESS} ========================
16:11:59: INFO: =======================================================
16:11:59: INFO: {percent files transferred 34.24%}
16:11:59: INFO: In handleProgram('tz.bin')
16:11:59: INFO: Looking for file 'tz.bin'
16:11:59: INFO: =======================================================
16:11:59: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\tz.bin'}
16:11:59: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:11:59: INFO: =======================================================
16:11:59: INFO: TARGET SAID: 'start 800, num 2048'
16:11:59: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.280 seconds (3.57 MBps)
16:11:59: INFO: {percent files transferred 34.69%}
16:11:59: INFO: TARGET SAID: 'Finished sector address 2848'
16:11:59: INFO:
16:11:59: INFO: =======================================================
16:11:59: INFO: ==================== {SUCCESS} ========================
16:11:59: INFO: =======================================================
16:11:59: INFO: {percent files transferred 34.69%}
16:11:59: INFO: In handleProgram('sdi.bin')
16:11:59: INFO: Looking for file 'sdi.bin'
16:11:59: INFO: =======================================================
16:11:59: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\sdi.bin'}
16:11:59: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:11:59: INFO: =======================================================
16:11:59: INFO: TARGET SAID: 'start 400, num 1024'
16:12:00: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:12:00: INFO: {percent files transferred 34.92%}
16:12:00: INFO: TARGET SAID: 'Finished sector address 1424'
16:12:00: INFO:
16:12:00: INFO: =======================================================
16:12:00: INFO: ==================== {SUCCESS} ========================
16:12:00: INFO: =======================================================
16:12:00: INFO: {percent files transferred 34.92%}
16:12:00: INFO: In handleProgram('aboot.bin')
16:12:00: INFO: Looking for file 'aboot.bin'
16:12:00: INFO: =======================================================
16:12:00: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\aboot.bin'}
16:12:00: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:12:00: INFO: =======================================================
16:12:00: INFO: TARGET SAID: 'start 1000, num 2048'
16:12:00: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.265 seconds (3.77 MBps)
16:12:00: INFO: {percent files transferred 35.37%}
16:12:00: INFO: TARGET SAID: 'Finished sector address 3048'
16:12:00: INFO:
16:12:00: INFO: =======================================================
16:12:00: INFO: ==================== {SUCCESS} ========================
16:12:00: INFO: =======================================================
16:12:00: INFO: {percent files transferred 35.37%}
16:12:00: INFO: In handleProgram('rpmbak.bin')
16:12:00: INFO: Looking for file 'rpmbak.bin'
16:12:00: INFO: =======================================================
16:12:00: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\rpmbak.bin'}
16:12:00: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:12:00: INFO: =======================================================
16:12:00: INFO: TARGET SAID: 'start 400, num 1024'
16:12:00: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:12:00: INFO: {percent files transferred 35.60%}
16:12:00: INFO: TARGET SAID: 'Finished sector address 1424'
16:12:00: INFO:
16:12:00: INFO: =======================================================
16:12:00: INFO: ==================== {SUCCESS} ========================
16:12:00: INFO: =======================================================
16:12:00: INFO: {percent files transferred 35.60%}
16:12:00: INFO: In handleProgram('tzbak.bin')
16:12:00: INFO: Looking for file 'tzbak.bin'
16:12:00: INFO: =======================================================
16:12:00: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\tzbak.bin'}
16:12:00: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:12:00: INFO: =======================================================
16:12:01: INFO: TARGET SAID: 'start 800, num 2048'
16:12:01: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.250 seconds (4.00 MBps)
16:12:01: INFO: {percent files transferred 36.05%}
16:12:01: INFO: TARGET SAID: 'Finished sector address 2848'
16:12:01: INFO:
16:12:01: INFO: =======================================================
16:12:01: INFO: ==================== {SUCCESS} ========================
16:12:01: INFO: =======================================================
16:12:01: INFO: {percent files transferred 36.05%}
16:12:01: INFO: In handleProgram('abootbak.bin')
16:12:01: INFO: Looking for file 'abootbak.bin'
16:12:01: INFO: =======================================================
16:12:01: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\abootbak.bin'}
16:12:01: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:12:01: INFO: =======================================================
16:12:01: INFO: TARGET SAID: 'start 1000, num 2048'
16:12:01: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.250 seconds (4.00 MBps)
16:12:01: INFO: {percent files transferred 36.51%}
16:12:01: INFO: TARGET SAID: 'Finished sector address 3048'
16:12:01: INFO:
16:12:01: INFO: =======================================================
16:12:01: INFO: ==================== {SUCCESS} ========================
16:12:01: INFO: =======================================================
16:12:01: INFO: {percent files transferred 36.51%}
16:12:01: INFO: In handleProgram('persist.bin')
16:12:01: INFO: Looking for file 'persist.bin'
16:12:01: INFO: =======================================================
16:12:01: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\persist.bin'}
16:12:01: INFO: {<program> (5.00 MB) 10240 sectors needed at location 0 on LUN 0}
16:12:01: INFO: =======================================================
16:12:01: INFO: TARGET SAID: 'start 14000, num 10240'
16:12:03: INFO: Overall to target 1.232 seconds (4.06 MBps)
16:12:03: INFO: {percent files transferred 38.78%}
16:12:03: INFO: TARGET SAID: 'Finished sector address 24240'
16:12:03: INFO:
16:12:03: INFO: =======================================================
16:12:03: INFO: ==================== {SUCCESS} ========================
16:12:03: INFO: =======================================================
16:12:03: INFO: {percent files transferred 38.78%}
16:12:03: INFO: In handleProgram('laf.bin')
16:12:03: INFO: Looking for file 'laf.bin'
16:12:03: INFO: =======================================================
16:12:03: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\laf.bin'}
16:12:03: INFO: {<program> (36.50 MB) 74752 sectors needed at location 0 on LUN 0}
16:12:03: INFO: =======================================================
16:12:03: INFO: TARGET SAID: 'start 18000, num 74752'
16:12:05: INFO: Overall to target 2.012 seconds (4.08 MBps)
16:12:05: INFO: {percent files transferred 42.50%}
16:12:07: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:12:07: INFO: {percent files transferred 46.29%}
16:12:09: INFO: Overall to target 6.037 seconds (4.09 MBps)
16:12:09: INFO: {percent files transferred 49.98%}
16:12:11: INFO: Overall to target 8.050 seconds (4.10 MBps)
16:12:11: INFO: {percent files transferred 53.76%}
16:12:12: INFO: Overall to target 8.876 seconds (4.11 MBps)
16:12:12: INFO: {percent files transferred 55.33%}
16:12:12: INFO: TARGET SAID: 'Finished sector address 92752'
16:12:12: INFO:
16:12:12: INFO: =======================================================
16:12:12: INFO: ==================== {SUCCESS} ========================
16:12:12: INFO: =======================================================
16:12:12: INFO: {percent files transferred 55.33%}
16:12:12: INFO: In handleProgram('boot.bin')
16:12:12: INFO: Looking for file 'boot.bin'
16:12:12: INFO: =======================================================
16:12:12: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\boot.bin'}
16:12:12: INFO: {<program> (31.00 MB) 63488 sectors needed at location 0 on LUN 0}
16:12:12: INFO: =======================================================
16:12:12: INFO: TARGET SAID: 'start 14000, num 63488'
16:12:14: INFO: Overall to target 2.013 seconds (4.13 MBps)
16:12:14: INFO: {percent files transferred 59.10%}
16:12:16: INFO: FILE ACCESS SLOW!! 16.64 MB in 0.175 seconds ( 95.09 MBps) --- Overall to target 4.025 seconds (4.13 MBps)
16:12:16: INFO: {percent files transferred 62.88%}
16:12:18: INFO: FILE ACCESS SLOW!! 24.61 MB in 0.271 seconds ( 90.81 MBps) --- Overall to target 6.037 seconds (4.08 MBps)
16:12:18: INFO: {percent files transferred 66.49%}
16:12:20: INFO: Overall to target 7.582 seconds (4.09 MBps)
16:12:20: INFO: {percent files transferred 69.39%}
16:12:20: INFO: TARGET SAID: 'Finished sector address 77488'
16:12:20: INFO:
16:12:20: INFO: =======================================================
16:12:20: INFO: ==================== {SUCCESS} ========================
16:12:20: INFO: =======================================================
16:12:20: INFO: {percent files transferred 69.39%}
16:12:20: INFO: In handleProgram('recovery.bin')
16:12:20: INFO: Looking for file 'recovery.bin'
16:12:20: INFO: =======================================================
16:12:20: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\recovery.bin'}
16:12:20: INFO: {<program> (32.00 MB) 65536 sectors needed at location 0 on LUN 0}
16:12:20: INFO: =======================================================
16:12:20: INFO: TARGET SAID: 'start 30000, num 65536'
16:12:22: INFO: Overall to target 2.012 seconds (4.07 MBps)
16:12:22: INFO: {percent files transferred 73.10%}
16:12:24: INFO: Overall to target 4.025 seconds (4.08 MBps)
16:12:24: INFO: {percent files transferred 76.84%}
16:12:26: INFO: Overall to target 6.037 seconds (4.10 MBps)
16:12:26: INFO: {percent files transferred 80.60%}
16:12:28: INFO: Overall to target 7.831 seconds (4.09 MBps)
16:12:28: INFO: {percent files transferred 83.90%}
16:12:28: INFO: TARGET SAID: 'Finished sector address 95536'
16:12:28: INFO:
16:12:28: INFO: =======================================================
16:12:28: INFO: ==================== {SUCCESS} ========================
16:12:28: INFO: =======================================================
16:12:28: INFO: {percent files transferred 83.90%}
16:12:28: INFO: In handleProgram('factory.bin')
16:12:28: INFO: Looking for file 'factory.bin'
16:12:28: INFO: =======================================================
16:12:28: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\factory.bin'}
16:12:28: INFO: {<program> (33.00 MB) 67584 sectors needed at location 0 on LUN 0}
16:12:28: INFO: =======================================================
16:12:28: INFO: TARGET SAID: 'start 20000, num 67584'
16:12:30: INFO: FILE ACCESS SLOW!! 8.11 MB in 0.095 seconds ( 85.36 MBps) --- Overall to target 2.013 seconds (4.03 MBps)
16:12:30: INFO: {percent files transferred 87.58%}
16:12:32: INFO: FILE ACCESS SLOW!! 16.38 MB in 0.222 seconds ( 73.76 MBps) --- Overall to target 4.025 seconds (4.07 MBps)
16:12:32: INFO: {percent files transferred 91.33%}
16:12:34: INFO: FILE ACCESS SLOW!! 24.65 MB in 0.330 seconds ( 74.69 MBps) --- Overall to target 6.037 seconds (4.08 MBps)
16:12:34: INFO: {percent files transferred 95.08%}
16:12:36: INFO: FILE ACCESS SLOW!! 32.97 MB in 0.346 seconds ( 95.29 MBps) --- Overall to target 8.050 seconds (4.10 MBps)
16:12:36: INFO: {percent files transferred 98.85%}
16:12:36: INFO: Overall to target 8.050 seconds (4.10 MBps)
16:12:36: INFO: {percent files transferred 98.87%}
16:12:36: INFO: TARGET SAID: 'Finished sector address 87584'
16:12:36: INFO:
16:12:36: INFO: =======================================================
16:12:36: INFO: ==================== {SUCCESS} ========================
16:12:36: INFO: =======================================================

qfil 2.0.5

f500l
16:12:36: INFO: {percent files transferred 98.87%}
16:12:36: INFO: In handleProgram('sbl1bak.bin')
16:12:36: INFO: Looking for file 'sbl1bak.bin'
16:12:36: INFO: =======================================================
16:12:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\sbl1bak.bin'}
16:12:36: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:12:36: INFO: =======================================================
16:12:36: INFO: TARGET SAID: 'start 800, num 2048'
16:12:36: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.265 seconds (3.77 MBps)
16:12:36: INFO: {percent files transferred 99.32%}
16:12:36: INFO: TARGET SAID: 'Finished sector address 2848'
16:12:36: INFO:
16:12:36: INFO: =======================================================
16:12:36: INFO: ==================== {SUCCESS} ========================
16:12:36: INFO: =======================================================
16:12:36: INFO: {percent files transferred 99.32%}
16:12:36: INFO: In handleProgram('hyp.bin')
16:12:36: INFO: Looking for file 'hyp.bin'
16:12:36: INFO: =======================================================
16:12:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\hyp.bin'}
16:12:36: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:12:36: INFO: =======================================================
16:12:37: INFO: TARGET SAID: 'start 400, num 1024'
16:12:37: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:12:37: INFO: {percent files transferred 99.55%}
16:12:37: INFO: TARGET SAID: 'Finished sector address 1424'
16:12:37: INFO:
16:12:37: INFO: =======================================================
16:12:37: INFO: ==================== {SUCCESS} ========================
16:12:37: INFO: =======================================================
16:12:37: INFO: {percent files transferred 99.55%}
16:12:37: INFO: In handleProgram('BackupGPT.bin')
16:12:37: INFO: Looking for file 'BackupGPT.bin'
16:12:37: INFO: =======================================================
16:12:37: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\f500l recovery\BackupGPT.bin'}
16:12:37: INFO: {<program> (512.00 KB) 1024 sectors needed at location 7633920 on LUN 0}
16:12:37: INFO: =======================================================
16:12:37: INFO: TARGET SAID: 'start 7633920, num 1024'
16:12:37: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.110 seconds (4.55 MBps)
16:12:37: INFO: {percent files transferred 99.77%}
16:12:37: INFO: TARGET SAID: 'Finished sector address 7634944'
16:12:37: INFO:
16:12:37: INFO: =======================================================
16:12:37: INFO: ==================== {SUCCESS} ========================
16:12:37: INFO: =======================================================
16:12:37: INFO: {percent files transferred 99.77%}
16:12:37: INFO: ==============================================================
16:12:37: INFO: Files used and their paths
16:12:37: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:12:37: INFO: 2 'C:\Users\aaya\Desktop\f500l recovery\rawprogram0.xml'
16:12:37: INFO: 3 'C:\Users\aaya\Desktop\f500l recovery\PrimaryGPT.bin'
16:12:37: INFO: 4 'C:\Users\aaya\Desktop\f500l recovery\modem.bin'
16:12:37: INFO: 5 'C:\Users\aaya\Desktop\f500l recovery\sbl1.bin'
16:12:37: INFO: 6 'C:\Users\aaya\Desktop\f500l recovery\rpm.bin'
16:12:37: INFO: 7 'C:\Users\aaya\Desktop\f500l recovery\tz.bin'
16:12:37: INFO: 8 'C:\Users\aaya\Desktop\f500l recovery\sdi.bin'
16:12:37: INFO: 9 'C:\Users\aaya\Desktop\f500l recovery\aboot.bin'
16:12:37: INFO: 10 'C:\Users\aaya\Desktop\f500l recovery\rpmbak.bin'
16:12:37: INFO: 11 'C:\Users\aaya\Desktop\f500l recovery\tzbak.bin'
16:12:37: INFO: 12 'C:\Users\aaya\Desktop\f500l recovery\abootbak.bin'
16:12:37: INFO: 13 'C:\Users\aaya\Desktop\f500l recovery\persist.bin'
16:12:37: INFO: 14 'C:\Users\aaya\Desktop\f500l recovery\laf.bin'
16:12:37: INFO: 15 'C:\Users\aaya\Desktop\f500l recovery\boot.bin'
16:12:37: INFO: 16 'C:\Users\aaya\Desktop\f500l recovery\recovery.bin'
16:12:37: INFO: 17 'C:\Users\aaya\Desktop\f500l recovery\factory.bin'
16:12:37: INFO: 18 'C:\Users\aaya\Desktop\f500l recovery\sbl1bak.bin'
16:12:37: INFO: 19 'C:\Users\aaya\Desktop\f500l recovery\hyp.bin'
16:12:37: INFO: 20 'C:\Users\aaya\Desktop\f500l recovery\BackupGPT.bin'
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
16:12:37: INFO: ==============================================================
16:12:37: INFO: NOTE: There were WARNINGS!! Repeated here, but please see log for more detail
User requested to ONLY program num_partition_sectors 1024 of 'sbl1.bin' (512.00 KB).
To load this file completely would require 2048 sectors (1.00 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
NOTE: There were WARNINGS!! Repeated above, but please see log for more detail
16:12:37: INFO: ==============================================================
16:12:37: INFO: _ (done)
16:12:37: INFO: | |
16:12:37: INFO: __| | ___ _ __ ___
16:12:37: INFO: / _` |/ _ \| '_ \ / _ \
16:12:37: INFO: | (_| | (_) | | | | __/
16:12:37: INFO: \__,_|\___/|_| |_|\___|
16:12:37: INFO: {All Finished Successfully}
16:12:37: INFO: Overall to target 58.579 seconds (3.76 MBps)
16:12:37: INFO: {percent files transferred 99.77%}
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:12:38: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=patch0.xml --search_path=C:\Users\aaya\Desktop\f500l recovery --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
16:12:38: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:12:38: INFO: Showing network mappings to allow debugging
16:12:38: INFO:
16:12:38: INFO: Trying to store 'patch0.xml' in string table
16:12:38: INFO: Looking for file 'patch0.xml'
16:12:38: INFO: User wants to talk to port '\\.\COM4'
16:12:38: INFO: Took 0.00000000 seconds to open port
16:12:38: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:12:38: INFO: If you don't want this, use --dontsorttags
16:12:38: INFO: Sending <configure>
16:12:38: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:12:38: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:12:38: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:12:38: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:12:38: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:12:38: INFO: TARGET SAID: 'Patched sector 15 with 03A3DFDE'
16:12:38: INFO: TARGET SAID: 'Patched sector 61071340 with 03A3DFDE'
16:12:38: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFDE'
16:12:38: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDE'
16:12:39: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFFF'
16:12:39: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFFF'
16:12:39: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDF'
16:12:39: INFO: TARGET SAID: 'crc start sector 2, over bytes 7168'
16:12:39: INFO: TARGET SAID: 'Patched sector 1 with 50062988'
16:12:39: INFO: TARGET SAID: 'crc start sector 61071327, over bytes 7168'
16:12:39: INFO: TARGET SAID: 'Patched sector 61071359 with 69DA7787'
16:12:39: INFO: TARGET SAID: 'Patched sector 1 with 00000000'
16:12:39: INFO: TARGET SAID: 'crc start sector 1, over bytes 92'
16:12:39: INFO: TARGET SAID: 'Patched sector 1 with EE94377E'
16:12:39: INFO: TARGET SAID: 'Patched sector 61071359 with 00000000'
16:12:39: INFO: TARGET SAID: 'crc start sector 61071359, over bytes 92'
16:12:39: INFO: TARGET SAID: 'Patched sector 61071359 with 1E727681'
16:12:39: INFO: ==============================================================
16:12:39: INFO: Files used and their paths
16:12:39: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:12:39: INFO: 2 'C:\Users\aaya\Desktop\f500l recovery\patch0.xml'
16:12:39: INFO: _ (done)
16:12:39: INFO: | |
16:12:39: INFO: __| | ___ _ __ ___
16:12:39: INFO: / _` |/ _ \| '_ \ / _ \
16:12:39: INFO: | (_| | (_) | | | | __/
16:12:39: INFO: \__,_|\___/|_| |_|\___|
16:12:39: INFO: {All Finished Successfully}
16:12:39: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 1.451 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:12:40: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC --setactivepartition=0
************************************************
16:12:40: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:12:40: INFO: Showing network mappings to allow debugging
16:12:40: INFO: User wants to talk to port '\\.\COM4'
16:12:40: INFO: Took 0.00000000 seconds to open port
16:12:40: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:12:40: INFO: If you don't want this, use --dontsorttags
16:12:40: INFO: Sending <configure>
16:12:40: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:12:40: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:12:40: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:12:40: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:12:40: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:12:40: INFO: Sending <setbootablestoragedrive>
16:12:40: INFO: ==============================================================
16:12:40: INFO: Files used and their paths
16:12:40: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:12:40: INFO: _ (done)
16:12:40: INFO: | |
16:12:40: INFO: __| | ___ _ __ ___
16:12:40: INFO: / _` |/ _ \| '_ \ / _ \
16:12:40: INFO: | (_| | (_) | | | | __/
16:12:40: INFO: \__,_|\___/|_| |_|\___|
16:12:40: INFO: {All Finished Successfully}
16:12:40: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 0.187 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Succeed
Finish Download
Programmer Path:C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\prog_emmc_firehose_8992_lite.mbn
Image Search Path: C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release
RAWPROGRAM file path: C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\patch0.xml
Image Search Path: C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release
RAWPROGRAM file path: C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\patch0.xml
Start Download
Program Path:C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\prog_emmc_firehose_8992_lite.mbn
16:13:34: Requested ID 13, file: "C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\prog_emmc_firehose_8992_lite.mbn"
16:13:34: 273568 bytes transferred in 0.156000 seconds (1.6724MBps)
16:13:34: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
16:13:34: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:13:37: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
16:13:37: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:13:37: INFO: Showing network mappings to allow debugging
16:13:37: INFO:
16:13:37: INFO: Trying to store 'rawprogram0.xml' in string table
16:13:37: INFO: Looking for file 'rawprogram0.xml'
16:13:37: INFO: User wants to talk to port '\\.\COM4'
16:13:37: INFO: Took 0.00000000 seconds to open port
16:13:37: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:13:37: INFO: If you don't want this, use --dontsorttags
16:13:37: INFO: Looking for file 'PrimaryGPT_0.bin'
16:13:37: INFO: Looking for file 'modem_32768.bin'
16:13:37: INFO: Looking for file 'pmic_229376.bin'
16:13:37: INFO: Looking for file 'tz_232448.bin'
16:13:37: INFO: Looking for file 'sdi_234496.bin'
16:13:37: INFO: Looking for file 'hyp_235520.bin'
16:13:37: INFO: Looking for file 'rpm_236544.bin'
16:13:37: INFO: Looking for file 'aboot_237568.bin'
16:13:38: INFO: Looking for file 'sbl1bak_241664.bin'
16:13:38: INFO: Looking for file 'pmicbak_243712.bin'
16:13:38: INFO: Looking for file 'tzbak_244736.bin'
16:13:38: INFO: Looking for file 'hypbak_246784.bin'
16:13:38: INFO: Looking for file 'rpmbak_247808.bin'
16:13:38: INFO: Looking for file 'abootbak_248832.bin'
16:13:38: INFO: Looking for file 'persist_294912.bin'
16:13:38: INFO: Looking for file 'sec_376832.bin'
16:13:38: INFO: Looking for file 'laf_393216.bin'
16:13:38: INFO: Looking for file 'boot_491520.bin'
16:13:38: INFO: Looking for file 'recovery_573440.bin'
16:13:38: INFO: Looking for file 'raw_resources_770048.bin'
16:13:38: INFO: Looking for file 'raw_resourcesbak_778240.bin'
16:13:39: INFO: Looking for file 'factory_917504.bin'
16:13:39: INFO: Looking for file 'system_1048576.bin'
16:13:39: INFO: Looking for file 'system_1312904.bin'
16:13:39: INFO: Looking for file 'system_1576912.bin'
16:13:39: INFO: Looking for file 'system_1837192.bin'
16:13:39: INFO: Looking for file 'system_1841240.bin'
16:13:39: INFO: Looking for file 'system_2101200.bin'
16:13:39: INFO: Looking for file 'system_2361480.bin'
16:13:39: INFO: Looking for file 'system_2365528.bin'
16:13:39: INFO: Looking for file 'system_2625488.bin'
16:13:39: INFO: Looking for file 'system_2885768.bin'
16:13:39: INFO: Looking for file 'system_2889816.bin'
16:13:40: INFO: Looking for file 'system_3149776.bin'
16:13:40: INFO: Looking for file 'system_3410056.bin'
16:13:40: INFO: Looking for file 'system_3414104.bin'
16:13:40: INFO: Looking for file 'system_3674064.bin'
16:13:40: INFO: Looking for file 'system_3936208.bin'
16:13:40: INFO: Looking for file 'system_4198352.bin'
16:13:40: INFO: Looking for file 'system_4722640.bin'
16:13:40: INFO: Looking for file 'system_4984784.bin'
16:13:40: INFO: Looking for file 'system_5246928.bin'
16:13:40: INFO: Looking for file 'system_5509072.bin'
16:13:40: INFO: Looking for file 'system_5771216.bin'
16:13:40: INFO: Looking for file 'system_6033360.bin'
16:13:41: INFO: Looking for file 'system_6295504.bin'
16:13:41: INFO: Looking for file 'system_6557648.bin'
16:13:41: INFO: Looking for file 'system_6815744.bin'
16:13:41: INFO: Looking for file 'system_6819792.bin'
16:13:41: INFO: Looking for file 'system_7077888.bin'
16:13:41: INFO: Looking for file 'system_7340032.bin'
16:13:41: INFO: Looking for file 'system_7602176.bin'
16:13:41: INFO: Looking for file 'system_7604360.bin'
16:13:41: INFO: Looking for file 'system_7608408.bin'
16:13:41: INFO: Looking for file 'system_8126464.bin'
16:13:41: INFO: Looking for file 'system_8128648.bin'
16:13:41: INFO: Looking for file 'system_8132696.bin'
16:13:41: INFO: Looking for file 'system_8650752.bin'
16:13:41: INFO: Looking for file 'system_8912896.bin'
16:13:41: INFO: Looking for file 'system_9175040.bin'
16:13:41: INFO: Looking for file 'system_9437184.bin'
16:13:41: INFO: Looking for file 'system_9699328.bin'
16:13:41: INFO: Looking for file 'system_9703376.bin'
16:13:41: INFO: Looking for file 'BackupGPT_61070336.bin'
16:13:41: INFO:
Total to be tansferd with <program> or <read> is 3.11 GB
16:13:41: INFO: Sending <configure>
16:13:42: INFO: TARGET SAID: 'Binary build date: Mar 3 2015 @ 19:29:19'
16:13:42: INFO: TARGET SAID: 'Chip serial num: 3364918 (0x335836)'
16:13:42: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
16:13:42: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:13:42: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:13:42: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:13:42: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:13:42: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:13:42: INFO: In handleProgram('PrimaryGPT_0.bin')
16:13:42: INFO: Looking for file 'PrimaryGPT_0.bin'
16:13:42: INFO: =======================================================
16:13:42: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\PrimaryGPT_0.bin'}
16:13:42: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:13:42: INFO: =======================================================
16:13:42: INFO: TARGET SAID: 'start 8000, num 1024'
16:13:42: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:13:42: INFO: {percent files transferred 0.02%}
16:13:42: INFO: TARGET SAID: 'Finished sector address 9024'
16:13:42: INFO:
16:13:42: INFO: =======================================================
16:13:42: INFO: ==================== {SUCCESS} ========================
16:13:42: INFO: =======================================================
16:13:42: INFO: {percent files transferred 0.02%}
16:13:42: INFO: In handleProgram('modem_32768.bin')
16:13:42: INFO: Looking for file 'modem_32768.bin'
16:13:42: INFO: =======================================================
16:13:42: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\modem_32768.bin'}
16:13:42: INFO: {<program> (75.00 MB) 153600 sectors needed at location 0 on LUN 0}
16:13:42: INFO: =======================================================
16:13:42: INFO: TARGET SAID: 'start 30000, num 153600'
16:13:44: INFO: FILE ACCESS SLOW!! 7.95 MB in 0.249 seconds ( 31.91 MBps) --- Overall to target 2.012 seconds (3.95 MBps)
16:13:44: INFO: {percent files transferred 0.26%}
16:13:46: INFO: FILE ACCESS SLOW!! 16.25 MB in 0.312 seconds ( 52.08 MBps) --- Overall to target 4.025 seconds (4.04 MBps)
16:13:46: INFO: {percent files transferred 0.53%}
16:13:48: INFO: FILE ACCESS SLOW!! 24.34 MB in 0.375 seconds ( 64.90 MBps) --- Overall to target 6.037 seconds (4.03 MBps)
16:13:48: INFO: {percent files transferred 0.78%}
16:13:50: INFO: FILE ACCESS SLOW!! 32.50 MB in 0.375 seconds ( 86.67 MBps) --- Overall to target 8.049 seconds (4.04 MBps)
16:13:50: INFO: {percent files transferred 1.03%}
16:13:52: INFO: Overall to target 10.062 seconds (4.03 MBps)
16:13:52: INFO: {percent files transferred 1.29%}
16:13:54: INFO: Overall to target 12.074 seconds (4.05 MBps)
16:13:54: INFO: {percent files transferred 1.55%}
16:13:56: INFO: Overall to target 14.087 seconds (4.06 MBps)
16:13:56: INFO: {percent files transferred 1.81%}
16:13:58: INFO: Overall to target 16.099 seconds (4.07 MBps)
16:13:58: INFO: {percent files transferred 2.07%}
16:14:00: INFO: Overall to target 18.112 seconds (4.07 MBps)
16:14:00: INFO: {percent files transferred 2.33%}
16:14:00: INFO: Overall to target 18.392 seconds (4.08 MBps)
16:14:00: INFO: {percent files transferred 2.37%}
16:14:00: INFO: TARGET SAID: 'Finished sector address 183600'
16:14:00: INFO:
16:14:00: INFO: =======================================================
16:14:00: INFO: ==================== {SUCCESS} ========================
16:14:00: INFO: =======================================================
16:14:00: INFO: {percent files transferred 2.37%}
16:14:00: INFO: In handleProgram('pmic_229376.bin')
16:14:00: INFO: Looking for file 'pmic_229376.bin'
16:14:00: INFO: =======================================================
16:14:00: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\pmic_229376.bin'}
16:14:00: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:00: INFO: =======================================================
16:14:01: INFO: TARGET SAID: 'start 400, num 1024'
16:14:01: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:14:01: INFO: {percent files transferred 2.38%}
16:14:01: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:01: INFO:
16:14:01: INFO: =======================================================
16:14:01: INFO: ==================== {SUCCESS} ========================
16:14:01: INFO: =======================================================
16:14:01: INFO: {percent files transferred 2.38%}
16:14:01: INFO: In handleProgram('tz_232448.bin')
16:14:01: INFO: Looking for file 'tz_232448.bin'
16:14:01: INFO: =======================================================
16:14:01: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\tz_232448.bin'}
16:14:01: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:14:01: INFO: =======================================================
16:14:01: INFO: TARGET SAID: 'start 800, num 2048'
16:14:01: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.250 seconds (4.00 MBps)
16:14:01: INFO: {percent files transferred 2.41%}
16:14:01: INFO: TARGET SAID: 'Finished sector address 2848'
16:14:01: INFO:
16:14:01: INFO: =======================================================
16:14:01: INFO: ==================== {SUCCESS} ========================
16:14:01: INFO: =======================================================
16:14:01: INFO: {percent files transferred 2.41%}
16:14:01: INFO: In handleProgram('sdi_234496.bin')
16:14:01: INFO: Looking for file 'sdi_234496.bin'
16:14:01: INFO: =======================================================
16:14:01: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\sdi_234496.bin'}
16:14:01: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:01: INFO: =======================================================
16:14:01: INFO: TARGET SAID: 'start 400, num 1024'
16:14:02: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.125 seconds (4.00 MBps)
16:14:02: INFO: {percent files transferred 2.43%}
16:14:02: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:02: INFO:
16:14:02: INFO: =======================================================
16:14:02: INFO: ==================== {SUCCESS} ========================
16:14:02: INFO: =======================================================
16:14:02: INFO: {percent files transferred 2.43%}
16:14:02: INFO: In handleProgram('hyp_235520.bin')
16:14:02: INFO: Looking for file 'hyp_235520.bin'
16:14:02: INFO: =======================================================
16:14:02: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\hyp_235520.bin'}
16:14:02: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:02: INFO: =======================================================
16:14:02: INFO: TARGET SAID: 'start 400, num 1024'
16:14:02: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.172 seconds (2.91 MBps)
16:14:02: INFO: {percent files transferred 2.45%}
16:14:02: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:02: INFO:
16:14:02: INFO: =======================================================
16:14:02: INFO: ==================== {SUCCESS} ========================
16:14:02: INFO: =======================================================
16:14:02: INFO: {percent files transferred 2.45%}
16:14:02: INFO: In handleProgram('rpm_236544.bin')
16:14:02: INFO: Looking for file 'rpm_236544.bin'
16:14:02: INFO: =======================================================
16:14:02: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rpm_236544.bin'}
16:14:02: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:02: INFO: =======================================================
16:14:02: INFO: TARGET SAID: 'start 400, num 1024'
16:14:02: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:14:02: INFO: {percent files transferred 2.46%}
16:14:02: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:02: INFO:
16:14:02: INFO: =======================================================
16:14:02: INFO: ==================== {SUCCESS} ========================
16:14:02: INFO: =======================================================
16:14:02: INFO: {percent files transferred 2.46%}
16:14:02: INFO: In handleProgram('aboot_237568.bin')
16:14:02: INFO: Looking for file 'aboot_237568.bin'
16:14:02: INFO: =======================================================
16:14:02: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\aboot_237568.bin'}
16:14:02: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:14:02: INFO: =======================================================
16:14:02: INFO: TARGET SAID: 'start 1000, num 2048'
16:14:03: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.249 seconds (4.02 MBps)
16:14:03: INFO: {percent files transferred 2.49%}
16:14:03: INFO: TARGET SAID: 'Finished sector address 3048'

16:14:03: INFO: =======================================================
16:14:03: INFO: ==================== {SUCCESS} ========================
16:14:03: INFO: =======================================================
16:14:03: INFO: {percent files transferred 2.49%}
16:14:03: INFO: In handleProgram('sbl1bak_241664.bin')
16:14:03: INFO: Looking for file 'sbl1bak_241664.bin'
16:14:03: INFO: =======================================================
16:14:03: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\sbl1bak_241664.bin'}
16:14:03: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:14:03: INFO: =======================================================
16:14:03: INFO: TARGET SAID: 'start 800, num 2048'
16:14:03: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.250 seconds (4.00 MBps)
16:14:03: INFO: {percent files transferred 2.52%}
16:14:03: INFO: TARGET SAID: 'Finished sector address 2848'
16:14:03: INFO:
16:14:03: INFO: =======================================================
16:14:03: INFO: ==================== {SUCCESS} ========================
16:14:03: INFO: =======================================================
16:14:03: INFO: {percent files transferred 2.52%}
16:14:03: INFO: In handleProgram('pmicbak_243712.bin')
16:14:03: INFO: Looking for file 'pmicbak_243712.bin'
16:14:03: INFO: =======================================================
16:14:03: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\pmicbak_243712.bin'}
16:14:03: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:03: INFO: =======================================================
16:14:03: INFO: TARGET SAID: 'start 400, num 1024'
16:14:04: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:14:04: INFO: {percent files transferred 2.54%}
16:14:04: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:04: INFO:
16:14:04: INFO: =======================================================
16:14:04: INFO: ==================== {SUCCESS} ========================
16:14:04: INFO: =======================================================
16:14:04: INFO: {percent files transferred 2.54%}
16:14:04: INFO: In handleProgram('tzbak_244736.bin')
16:14:04: INFO: Looking for file 'tzbak_244736.bin'
16:14:04: INFO: =======================================================
16:14:04: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\tzbak_244736.bin'}
16:14:04: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:14:04: INFO: =======================================================
16:14:04: INFO: TARGET SAID: 'start 800, num 2048'
16:14:04: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.249 seconds (4.02 MBps)
16:14:04: INFO: {percent files transferred 2.57%}
16:14:04: INFO: TARGET SAID: 'Finished sector address 2848'
16:14:04: INFO:
16:14:04: INFO: =======================================================
16:14:04: INFO: ==================== {SUCCESS} ========================
16:14:04: INFO: =======================================================
16:14:04: INFO: {percent files transferred 2.57%}
16:14:04: INFO: In handleProgram('hypbak_246784.bin')
16:14:04: INFO: Looking for file 'hypbak_246784.bin'
16:14:04: INFO: =======================================================
16:14:04: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\hypbak_246784.bin'}
16:14:04: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:04: INFO: =======================================================
16:14:04: INFO: TARGET SAID: 'start 400, num 1024'
16:14:04: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:14:04: INFO: {percent files transferred 2.59%}
16:14:04: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:04: INFO:
16:14:04: INFO: =======================================================
16:14:04: INFO: ==================== {SUCCESS} ========================
16:14:04: INFO: =======================================================
16:14:04: INFO: {percent files transferred 2.59%}
16:14:04: INFO: In handleProgram('rpmbak_247808.bin')
16:14:04: INFO: Looking for file 'rpmbak_247808.bin'
16:14:04: INFO: =======================================================
16:14:04: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rpmbak_247808.bin'}
16:14:04: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:04: INFO: =======================================================
16:14:05: INFO: TARGET SAID: 'start 400, num 1024'
16:14:05: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:14:05: INFO: {percent files transferred 2.60%}
16:14:05: INFO: TARGET SAID: 'Finished sector address 1424'
16:14:05: INFO:
16:14:05: INFO: =======================================================
16:14:05: INFO: ==================== {SUCCESS} ========================
16:14:05: INFO: =======================================================
16:14:05: INFO: {percent files transferred 2.60%}
16:14:05: INFO: In handleProgram('abootbak_248832.bin')
16:14:05: INFO: Looking for file 'abootbak_248832.bin'
16:14:05: INFO: =======================================================
16:14:05: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\abootbak_248832.bin'}
16:14:05: INFO: {<program> (1.00 MB) 2048 sectors needed at location 0 on LUN 0}
16:14:05: INFO: =======================================================
16:14:05: INFO: TARGET SAID: 'start 1000, num 2048'
16:14:05: INFO: FILE ACCESS SLOW!! 1.00 MB in 0.015 seconds ( 66.67 MBps) --- Overall to target 0.265 seconds (3.77 MBps)
16:14:05: INFO: {percent files transferred 2.63%}
16:14:05: INFO: TARGET SAID: 'Finished sector address 3048'
16:14:05: INFO:
16:14:05: INFO: =======================================================
16:14:05: INFO: ==================== {SUCCESS} ========================
16:14:05: INFO: =======================================================
16:14:05: INFO: {percent files transferred 2.63%}
16:14:05: INFO: In handleProgram('persist_294912.bin')
16:14:05: INFO: Looking for file 'persist_294912.bin'
16:14:05: INFO: =======================================================
16:14:05: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\persist_294912.bin'}
16:14:05: INFO: {<program> (5.00 MB) 10240 sectors needed at location 0 on LUN 0}
16:14:05: INFO: =======================================================
16:14:05: INFO: TARGET SAID: 'start 14000, num 10240'
16:14:07: INFO: Overall to target 1.217 seconds (4.11 MBps)
16:14:07: INFO: {percent files transferred 2.79%}
16:14:07: INFO: TARGET SAID: 'Finished sector address 24240'
16:14:07: INFO:
16:14:07: INFO: =======================================================
16:14:07: INFO: ==================== {SUCCESS} ========================
16:14:07: INFO: =======================================================
16:14:07: INFO: {percent files transferred 2.79%}
16:14:07: INFO: In handleProgram('sec_376832.bin')
16:14:07: INFO: Looking for file 'sec_376832.bin'
16:14:07: INFO: =======================================================
16:14:07: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\sec_376832.bin'}
16:14:07: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:14:07: INFO: =======================================================
16:14:07: INFO: TARGET SAID: 'start 4000, num 1024'
16:14:07: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.171 seconds (2.92 MBps)
16:14:07: INFO: {percent files transferred 2.81%}
16:14:07: INFO: TARGET SAID: 'Finished sector address 5024'
16:14:07: INFO:
16:14:07: INFO: =======================================================
16:14:07: INFO: ==================== {SUCCESS} ========================
16:14:07: INFO: =======================================================
16:14:07: INFO: {percent files transferred 2.81%}
16:14:07: INFO: In handleProgram('laf_393216.bin')
16:14:07: INFO: Looking for file 'laf_393216.bin'
16:14:07: INFO: =======================================================
16:14:07: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\laf_393216.bin'}
16:14:07: INFO: {<program> (30.50 MB) 62464 sectors needed at location 0 on LUN 0}
16:14:07: INFO: =======================================================
16:14:07: INFO: TARGET SAID: 'start 18000, num 62464'
16:14:09: INFO: Overall to target 2.012 seconds (4.05 MBps)
16:14:09: INFO: {percent files transferred 3.06%}
16:14:11: INFO: Overall to target 4.024 seconds (4.09 MBps)
16:14:11: INFO: {percent files transferred 3.32%}
16:14:13: INFO: Overall to target 6.037 seconds (4.08 MBps)
16:14:13: INFO: {percent files transferred 3.58%}
16:14:15: INFO: Overall to target 7.456 seconds (4.09 MBps)
16:14:15: INFO: {percent files transferred 3.76%}
16:14:15: INFO: TARGET SAID: 'Finished sector address 80464'
16:14:15: INFO:
16:14:15: INFO: =======================================================
16:14:15: INFO: ==================== {SUCCESS} ========================
16:14:15: INFO: =======================================================
16:14:15: INFO: {percent files transferred 3.76%}
16:14:15: INFO: In handleProgram('boot_491520.bin')
16:14:15: INFO: Looking for file 'boot_491520.bin'
16:14:15: INFO: =======================================================
16:14:15: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\boot_491520.bin'}
16:14:15: INFO: {<program> (26.00 MB) 53248 sectors needed at location 0 on LUN 0}
16:14:15: INFO: =======================================================
16:14:15: INFO: TARGET SAID: 'start 14000, num 53248'
16:14:17: INFO: Overall to target 2.013 seconds (4.10 MBps)
16:14:17: INFO: {percent files transferred 4.02%}
16:14:19: INFO: Overall to target 4.025 seconds (4.03 MBps)
16:14:19: INFO: {percent files transferred 4.27%}
16:14:21: INFO: Overall to target 6.037 seconds (4.06 MBps)
16:14:21: INFO: {percent files transferred 4.53%}
16:14:21: INFO: Overall to target 6.412 seconds (4.05 MBps)
16:14:21: INFO: {percent files transferred 4.58%}
16:14:21: INFO: TARGET SAID: 'Finished sector address 67248'
16:14:21: INFO:
16:14:21: INFO: =======================================================
16:14:21: INFO: ==================== {SUCCESS} ========================
16:14:21: INFO: =======================================================
16:14:21: INFO: {percent files transferred 4.58%}
16:14:21: INFO: In handleProgram('recovery_573440.bin')
16:14:21: INFO: Looking for file 'recovery_573440.bin'
16:14:21: INFO: =======================================================
16:14:21: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\recovery_573440.bin'}
16:14:21: INFO: {<program> (27.50 MB) 56320 sectors needed at location 0 on LUN 0}
16:14:21: INFO: =======================================================
16:14:21: INFO: TARGET SAID: 'start 30000, num 56320'
16:14:23: INFO: FILE ACCESS SLOW!! 7.89 MB in 0.126 seconds ( 62.62 MBps) --- Overall to target 2.012 seconds (3.92 MBps)
16:14:23: INFO: {percent files transferred 4.82%}
16:14:25: INFO: Overall to target 4.025 seconds (4.01 MBps)
16:14:25: INFO: {percent files transferred 5.08%}
16:14:27: INFO: Overall to target 6.037 seconds (4.06 MBps)
16:14:27: INFO: {percent files transferred 5.35%}
16:14:28: INFO: Overall to target 6.755 seconds (4.07 MBps)
16:14:28: INFO: {percent files transferred 5.44%}
16:14:28: INFO: TARGET SAID: 'Finished sector address 86320'
16:14:28: INFO:
16:14:28: INFO: =======================================================
16:14:28: INFO: ==================== {SUCCESS} ========================
16:14:28: INFO: =======================================================
16:14:28: INFO: {percent files transferred 5.44%}
16:14:28: INFO: In handleProgram('raw_resources_770048.bin')
16:14:28: INFO: Looking for file 'raw_resources_770048.bin'
16:14:28: INFO: =======================================================
16:14:28: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\raw_resources_770048.bin'}
16:14:28: INFO: {<program> (3.50 MB) 7168 sectors needed at location 0 on LUN 0}
16:14:28: INFO: =======================================================
16:14:28: INFO: TARGET SAID: 'start 2000, num 7168'
16:14:29: INFO: Overall to target 0.858 seconds (4.08 MBps)
16:14:29: INFO: {percent files transferred 5.55%}
16:14:29: INFO: TARGET SAID: 'Finished sector address 9168'
16:14:29: INFO:
16:14:29: INFO: =======================================================
16:14:29: INFO: ==================== {SUCCESS} ========================
16:14:29: INFO: =======================================================
16:14:29: INFO: {percent files transferred 5.55%}
16:14:29: INFO: In handleProgram('raw_resourcesbak_778240.bin')
16:14:29: INFO: Looking for file 'raw_resourcesbak_778240.bin'
16:14:29: INFO: =======================================================
16:14:29: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\raw_resourcesbak_778240.bin'}
16:14:29: INFO: {<program> (3.50 MB) 7168 sectors needed at location 0 on LUN 0}
16:14:29: INFO: =======================================================
16:14:29: INFO: TARGET SAID: 'start 22000, num 7168'
16:14:30: INFO: Overall to target 0.842 seconds (4.16 MBps)
16:14:30: INFO: {percent files transferred 5.66%}
16:14:30: INFO: TARGET SAID: 'Finished sector address 29168'
16:14:30: INFO:
16:14:30: INFO: =======================================================
16:14:30: INFO: ==================== {SUCCESS} ========================
16:14:30: INFO: =======================================================
16:14:30: INFO: {percent files transferred 5.66%}
16:14:30: INFO: In handleProgram('factory_917504.bin')
16:14:30: INFO: Looking for file 'factory_917504.bin'
16:14:30: INFO: =======================================================
16:14:30: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\factory_917504.bin'}
16:14:30: INFO: {<program> (30.00 MB) 61440 sectors needed at location 0 on LUN 0}
16:14:30: INFO: =======================================================
16:14:30: INFO: TARGET SAID: 'start 20000, num 61440'
16:14:32: INFO: Overall to target 2.012 seconds (4.09 MBps)
16:14:32: INFO: {percent files transferred 5.92%}
16:14:34: INFO: Overall to target 4.025 seconds (4.08 MBps)
16:14:34: INFO: {percent files transferred 6.17%}
16:14:36: INFO: Overall to target 6.037 seconds (4.10 MBps)
16:14:36: INFO: {percent files transferred 6.44%}
16:14:38: INFO: Overall to target 7.332 seconds (4.09 MBps)
16:14:38: INFO: {percent files transferred 6.60%}
16:14:38: INFO: TARGET SAID: 'Finished sector address 81440'
16:14:38: INFO:
16:14:38: INFO: =======================================================
16:14:38: INFO: ==================== {SUCCESS} ========================
16:14:38: INFO: =======================================================
16:14:38: INFO: {percent files transferred 6.60%}
16:14:38: INFO: In handleProgram('system_1048576.bin')
16:14:38: INFO: Looking for file 'system_1048576.bin'
16:14:38: INFO: =======================================================
16:14:38: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1048576.bin'}
16:14:38: INFO: {<program> (128.50 MB) 263168 sectors needed at location 0 on LUN 0}
16:14:38: INFO: =======================================================
16:14:38: INFO: TARGET SAID: 'start 32000, num 263168'
16:14:40: INFO: Overall to target 2.012 seconds (4.09 MBps)
16:14:40: INFO: {percent files transferred 6.86%}
16:14:42: INFO: Overall to target 4.025 seconds (4.04 MBps)
16:14:42: INFO: {percent files transferred 7.11%}
16:14:44: INFO: Overall to target 6.037 seconds (4.05 MBps)
16:14:44: INFO: {percent files transferred 7.37%}
16:14:46: INFO: Overall to target 8.050 seconds (4.07 MBps)
16:14:46: INFO: {percent files transferred 7.63%}
16:14:48: INFO: Overall to target 10.062 seconds (4.08 MBps)
16:14:48: INFO: {percent files transferred 7.89%}
16:14:50: INFO: Overall to target 12.074 seconds (4.07 MBps)
16:14:50: INFO: {percent files transferred 8.14%}
16:14:52: INFO: Overall to target 14.087 seconds (4.08 MBps)
16:14:52: INFO: {percent files transferred 8.40%}
16:14:54: INFO: Overall to target 16.099 seconds (4.08 MBps)
16:14:54: INFO: {percent files transferred 8.66%}
16:14:56: INFO: Overall to target 18.112 seconds (4.08 MBps)
16:14:56: INFO: {percent files transferred 8.92%}
16:14:58: INFO: Overall to target 20.124 seconds (4.08 MBps)
16:14:58: INFO: {percent files transferred 9.17%}
16:15:00: INFO: Overall to target 22.136 seconds (4.09 MBps)
16:15:00: INFO: {percent files transferred 9.44%}
16:15:02: INFO: Overall to target 24.149 seconds (4.09 MBps)
16:15:02: INFO: {percent files transferred 9.70%}
16:15:04: INFO: Overall to target 26.161 seconds (4.09 MBps)
16:15:04: INFO: {percent files transferred 9.96%}
16:15:06: INFO: Overall to target 28.174 seconds (4.10 MBps)
16:15:06: INFO: {percent files transferred 10.22%}
16:15:08: INFO: Overall to target 30.186 seconds (4.10 MBps)
16:15:08: INFO: {percent files transferred 10.48%}
16:15:09: INFO: Overall to target 31.341 seconds (4.10 MBps)
16:15:09: INFO: {percent files transferred 10.63%}
16:15:09: INFO: TARGET SAID: 'Finished sector address 295168'
16:15:09: INFO:
16:15:09: INFO: =======================================================
16:15:09: INFO: ==================== {SUCCESS} ========================
16:15:09: INFO: =======================================================
16:15:09: INFO: {percent files transferred 10.63%}
16:15:09: INFO: In handleProgram('system_1312904.bin')
16:15:09: INFO: Looking for file 'system_1312904.bin'
16:15:09: INFO: =======================================================
16:15:09: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1312904.bin'}
16:15:09: INFO: {<program> (127.00 MB) 260096 sectors needed at location 0 on LUN 0}
16:15:09: INFO: =======================================================
16:15:10: INFO: TARGET SAID: 'start 32000, num 260096'
16:15:12: INFO: FILE ACCESS SLOW!! 8.13 MB in 0.110 seconds ( 73.93 MBps) --- Overall to target 2.013 seconds (4.04 MBps)
16:15:12: INFO: {percent files transferred 10.88%}
16:15:14: INFO: FILE ACCESS SLOW!! 16.29 MB in 0.220 seconds ( 74.04 MBps) --- Overall to target 4.025 seconds (4.05 MBps)
16:15:14: INFO: {percent files transferred 11.14%}
16:15:16: INFO: FILE ACCESS SLOW!! 24.59 MB in 0.267 seconds ( 92.08 MBps) --- Overall to target 6.038 seconds (4.07 MBps)
16:15:16: INFO: {percent files transferred 11.40%}
16:15:18: INFO: Overall to target 8.050 seconds (4.09 MBps)
16:15:18: INFO: {percent files transferred 11.66%}
16:15:20: INFO: Overall to target 10.062 seconds (4.10 MBps)
16:15:20: INFO: {percent files transferred 11.92%}
16:15:22: INFO: Overall to target 12.075 seconds (4.11 MBps)
16:15:22: INFO: {percent files transferred 12.18%}
16:15:24: INFO: Overall to target 14.087 seconds (4.11 MBps)
16:15:24: INFO: {percent files transferred 12.44%}
16:15:26: INFO: Overall to target 16.100 seconds (4.10 MBps)
16:15:26: INFO: {percent files transferred 12.70%}
16:15:28: INFO: Overall to target 18.112 seconds (4.10 MBps)
16:15:28: INFO: {percent files transferred 12.96%}
16:15:30: INFO: Overall to target 20.124 seconds (4.11 MBps)
16:15:30: INFO: {percent files transferred 13.22%}
16:15:32: INFO: Overall to target 22.137 seconds (4.10 MBps)
16:15:32: INFO: {percent files transferred 13.47%}
16:15:34: INFO: Overall to target 24.149 seconds (4.10 MBps)
16:15:34: INFO: {percent files transferred 13.73%}
16:15:36: INFO: Overall to target 26.162 seconds (4.11 MBps)
16:15:36: INFO: {percent files transferred 14.00%}
16:15:38: INFO: Overall to target 28.174 seconds (4.11 MBps)
16:15:38: INFO: {percent files transferred 14.26%}
16:15:40: INFO: Overall to target 30.187 seconds (4.11 MBps)
16:15:40: INFO: {percent files transferred 14.52%}
16:15:40: INFO: Overall to target 30.904 seconds (4.11 MBps)
16:15:40: INFO: {percent files transferred 14.61%}
16:15:41: INFO: TARGET SAID: 'Finished sector address 292096'
16:15:41: INFO:
16:15:41: INFO: =======================================================
16:15:41: INFO: ==================== {SUCCESS} ========================
16:15:41: INFO: =======================================================
16:15:41: INFO: {percent files transferred 14.61%}
16:15:41: INFO: In handleProgram('system_1576912.bin')
16:15:41: INFO: Looking for file 'system_1576912.bin'
16:15:41: INFO: =======================================================
16:15:41: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1576912.bin'}
16:15:41: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:15:41: INFO: =======================================================
16:15:41: INFO: TARGET SAID: 'start 32000, num 259072'
16:15:43: INFO: FILE ACCESS SLOW!! 8.16 MB in 0.110 seconds ( 74.15 MBps) --- Overall to target 2.012 seconds (4.05 MBps)
16:15:43: INFO: {percent files transferred 14.87%}
16:15:45: INFO: FILE ACCESS SLOW!! 16.38 MB in 0.200 seconds ( 81.91 MBps) --- Overall to target 4.025 seconds (4.07 MBps)
16:15:45: INFO: {percent files transferred 15.12%}
16:15:47: INFO: Overall to target 6.037 seconds (4.10 MBps)
16:15:47: INFO: {percent files transferred 15.39%}
16:15:49: INFO: Overall to target 8.050 seconds (4.11 MBps)
16:15:49: INFO: {percent files transferred 15.65%}
16:15:51: INFO: Overall to target 10.062 seconds (4.12 MBps)
16:15:51: INFO: {percent files transferred 15.91%}
16:15:53: INFO: Overall to target 12.074 seconds (4.12 MBps)
16:15:53: INFO: {percent files transferred 16.17%}
16:15:55: INFO: Overall to target 14.087 seconds (4.12 MBps)
16:15:55: INFO: {percent files transferred 16.43%}
16:15:57: INFO: Overall to target 16.099 seconds (4.12 MBps)
16:15:57: INFO: {percent files transferred 16.69%}
16:15:59: INFO: Overall to target 18.112 seconds (4.12 MBps)
16:15:59: INFO: {percent files transferred 16.95%}
16:16:01: INFO: Overall to target 20.124 seconds (4.12 MBps)
16:16:01: INFO: {percent files transferred 17.21%}
16:16:03: INFO: Overall to target 22.136 seconds (4.12 MBps)
16:16:03: INFO: {percent files transferred 17.47%}
16:16:05: INFO: Overall to target 24.149 seconds (4.12 MBps)
16:16:05: INFO: {percent files transferred 17.73%}
16:16:07: INFO: Overall to target 26.161 seconds (4.06 MBps)
16:16:07: INFO: {percent files transferred 17.94%}
16:16:09: INFO: Overall to target 28.174 seconds (4.06 MBps)
16:16:09: INFO: {percent files transferred 18.20%}
16:16:11: INFO: Overall to target 30.186 seconds (4.07 MBps)
16:16:11: INFO: {percent files transferred 18.46%}
16:16:12: INFO: Overall to target 31.075 seconds (4.07 MBps)
16:16:12: INFO: {percent files transferred 18.58%}
16:16:12: INFO: TARGET SAID: 'Finished sector address 291072'
16:16:12: INFO:
16:16:12: INFO: =======================================================
16:16:12: INFO: ==================== {SUCCESS} ========================
16:16:12: INFO: =======================================================
16:16:12: INFO: {percent files transferred 18.58%}
16:16:12: INFO: In handleProgram('system_1837192.bin')
16:16:12: INFO: Looking for file 'system_1837192.bin'
16:16:12: INFO: =======================================================
16:16:12: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1837192.bin'}
16:16:12: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:16:12: INFO: =======================================================
16:16:12: INFO: TARGET SAID: 'start 32000, num 1024'
16:16:12: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.125 seconds (4.00 MBps)
16:16:12: INFO: {percent files transferred 18.59%}
16:16:12: INFO: TARGET SAID: 'Finished sector address 33024'
16:16:12: INFO:
16:16:12: INFO: =======================================================
16:16:12: INFO: ==================== {SUCCESS} ========================
16:16:12: INFO: =======================================================
16:16:12: INFO: {percent files transferred 18.59%}
16:16:12: INFO: In handleProgram('system_1841240.bin')
16:16:12: INFO: Looking for file 'system_1841240.bin'
16:16:12: INFO: =======================================================
16:16:12: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1841240.bin'}
16:16:12: INFO: {<program> (125.00 MB) 256000 sectors needed at location 0 on LUN 0}
16:16:12: INFO: =======================================================
16:16:12: INFO: TARGET SAID: 'start 32000, num 256000'
16:16:14: INFO: FILE ACCESS SLOW!! 7.53 MB in 0.263 seconds ( 28.64 MBps) --- Overall to target 2.028 seconds (3.71 MBps)
16:16:14: INFO: {percent files transferred 18.83%}
16:16:16: INFO: FILE ACCESS SLOW!! 15.71 MB in 0.279 seconds ( 56.31 MBps) --- Overall to target 4.040 seconds (3.89 MBps)
16:16:16: INFO: {percent files transferred 19.08%}
16:16:18: INFO: FILE ACCESS SLOW!! 23.96 MB in 0.295 seconds ( 81.22 MBps) --- Overall to target 6.053 seconds (3.96 MBps)
16:16:18: INFO: {percent files transferred 19.34%}
16:16:20: INFO: Overall to target 8.065 seconds (4.00 MBps)
16:16:20: INFO: {percent files transferred 19.60%}
16:16:22: INFO: Overall to target 10.077 seconds (4.03 MBps)
16:16:22: INFO: {percent files transferred 19.87%}
16:16:24: INFO: Overall to target 12.090 seconds (4.05 MBps)
16:16:24: INFO: {percent files transferred 20.13%}
16:16:26: INFO: Overall to target 14.102 seconds (4.06 MBps)
16:16:26: INFO: {percent files transferred 20.39%}
16:16:28: INFO: Overall to target 16.161 seconds (4.05 MBps)
16:16:28: INFO: {percent files transferred 20.65%}
16:16:30: INFO: Overall to target 18.174 seconds (4.06 MBps)
16:16:30: INFO: {percent files transferred 20.90%}
16:16:32: INFO: Overall to target 20.186 seconds (4.06 MBps)
16:16:32: INFO: {percent files transferred 21.16%}
16:16:34: INFO: Overall to target 22.199 seconds (4.07 MBps)
16:16:34: INFO: {percent files transferred 21.42%}
16:16:36: INFO: Overall to target 24.211 seconds (4.07 MBps)
16:16:36: INFO: {percent files transferred 21.68%}
16:16:38: INFO: Overall to target 26.224 seconds (4.08 MBps)
16:16:38: INFO: {percent files transferred 21.95%}
16:16:40: INFO: Overall to target 28.236 seconds (4.08 MBps)
16:16:40: INFO: {percent files transferred 22.21%}
16:16:42: INFO: Overall to target 30.248 seconds (4.09 MBps)
16:16:42: INFO: {percent files transferred 22.47%}
16:16:43: INFO: Overall to target 30.576 seconds (4.09 MBps)
16:16:43: INFO: {percent files transferred 22.51%}
16:16:43: INFO: TARGET SAID: 'Finished sector address 288000'

16:16:43: INFO:
16:16:43: INFO: =======================================================
16:16:43: INFO: ==================== {SUCCESS} ========================
16:16:43: INFO: =======================================================
16:16:43: INFO: {percent files transferred 22.51%}
16:16:43: INFO: In handleProgram('system_2101200.bin')
16:16:43: INFO: Looking for file 'system_2101200.bin'
16:16:43: INFO: =======================================================
16:16:43: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2101200.bin'}
16:16:43: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:16:43: INFO: =======================================================
16:16:43: INFO: TARGET SAID: 'start 32000, num 259072'
16:16:45: INFO: FILE ACCESS SLOW!! 6.83 MB in 0.403 seconds ( 16.94 MBps) --- Overall to target 2.013 seconds (3.39 MBps)
16:16:45: INFO: {percent files transferred 22.73%}
16:16:47: INFO: FILE ACCESS SLOW!! 15.08 MB in 0.403 seconds ( 37.41 MBps) --- Overall to target 4.025 seconds (3.75 MBps)
16:16:47: INFO: {percent files transferred 22.98%}
16:16:49: INFO: FILE ACCESS SLOW!! 23.38 MB in 0.403 seconds ( 58.02 MBps) --- Overall to target 6.037 seconds (3.87 MBps)
16:16:49: INFO: {percent files transferred 23.24%}
16:16:51: INFO: FILE ACCESS SLOW!! 31.74 MB in 0.403 seconds ( 78.76 MBps) --- Overall to target 8.050 seconds (3.94 MBps)
16:16:51: INFO: {percent files transferred 23.51%}
16:16:53: INFO: Overall to target 10.062 seconds (3.98 MBps)
16:16:53: INFO: {percent files transferred 23.77%}
16:16:55: INFO: Overall to target 12.075 seconds (4.01 MBps)
16:16:55: INFO: {percent files transferred 24.03%}
16:16:57: INFO: Overall to target 14.087 seconds (4.03 MBps)
16:16:57: INFO: {percent files transferred 24.29%}
16:16:59: INFO: Overall to target 16.099 seconds (4.04 MBps)
16:16:59: INFO: {percent files transferred 24.55%}
16:17:01: INFO: Overall to target 18.112 seconds (4.05 MBps)
16:17:01: INFO: {percent files transferred 24.81%}
16:17:03: INFO: Overall to target 20.124 seconds (4.06 MBps)
16:17:03: INFO: {percent files transferred 25.07%}
16:17:05: INFO: Overall to target 22.137 seconds (4.06 MBps)
16:17:05: INFO: {percent files transferred 25.33%}
16:17:07: INFO: Overall to target 24.149 seconds (4.07 MBps)
16:17:07: INFO: {percent files transferred 25.59%}
16:17:09: INFO: Overall to target 26.162 seconds (4.08 MBps)
16:17:09: INFO: {percent files transferred 25.85%}
16:17:11: INFO: Overall to target 28.174 seconds (4.08 MBps)
16:17:11: INFO: {percent files transferred 26.12%}
16:17:13: INFO: Overall to target 30.186 seconds (4.08 MBps)
16:17:13: INFO: {percent files transferred 26.38%}
16:17:14: INFO: Overall to target 30.951 seconds (4.09 MBps)
16:17:14: INFO: {percent files transferred 26.48%}
16:17:14: INFO: TARGET SAID: 'Finished sector address 291072'
16:17:14: INFO:
16:17:14: INFO: =======================================================
16:17:14: INFO: ==================== {SUCCESS} ========================
16:17:14: INFO: =======================================================
16:17:14: INFO: {percent files transferred 26.48%}
16:17:14: INFO: In handleProgram('system_2361480.bin')
16:17:14: INFO: Looking for file 'system_2361480.bin'
16:17:14: INFO: =======================================================
16:17:14: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2361480.bin'}
16:17:14: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:17:14: INFO: =======================================================
16:17:14: INFO: TARGET SAID: 'start 32000, num 1024'
16:17:14: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.124 seconds (4.03 MBps)
16:17:14: INFO: {percent files transferred 26.49%}
16:17:14: INFO: TARGET SAID: 'Finished sector address 33024'
16:17:14: INFO:
16:17:14: INFO: =======================================================
16:17:14: INFO: ==================== {SUCCESS} ========================
16:17:14: INFO: =======================================================
16:17:14: INFO: {percent files transferred 26.49%}
16:17:14: INFO: In handleProgram('system_2365528.bin')
16:17:14: INFO: Looking for file 'system_2365528.bin'
16:17:14: INFO: =======================================================
16:17:14: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2365528.bin'}
16:17:14: INFO: {<program> (125.00 MB) 256000 sectors needed at location 0 on LUN 0}
16:17:14: INFO: =======================================================
16:17:14: INFO: TARGET SAID: 'start 32000, num 256000'
16:17:16: INFO: Overall to target 2.013 seconds (4.04 MBps)
16:17:16: INFO: {percent files transferred 26.75%}
16:17:18: INFO: Overall to target 4.025 seconds (4.09 MBps)
16:17:18: INFO: {percent files transferred 27.01%}
16:17:20: INFO: Overall to target 6.037 seconds (4.11 MBps)
16:17:20: INFO: {percent files transferred 27.27%}
16:17:23: INFO: Overall to target 8.050 seconds (4.12 MBps)
16:17:23: INFO: {percent files transferred 27.53%}
16:17:25: INFO: Overall to target 10.062 seconds (4.12 MBps)
16:17:25: INFO: {percent files transferred 27.79%}
16:17:27: INFO: Overall to target 12.075 seconds (4.13 MBps)
16:17:27: INFO: {percent files transferred 28.06%}
16:17:29: INFO: Overall to target 14.087 seconds (4.13 MBps)
16:17:29: INFO: {percent files transferred 28.32%}
16:17:31: INFO: Overall to target 16.099 seconds (4.13 MBps)
16:17:31: INFO: {percent files transferred 28.58%}
16:17:33: INFO: Overall to target 18.112 seconds (4.13 MBps)
16:17:33: INFO: {percent files transferred 28.84%}
16:17:35: INFO: Overall to target 20.124 seconds (4.13 MBps)
16:17:35: INFO: {percent files transferred 29.10%}
16:17:37: INFO: Overall to target 22.137 seconds (4.13 MBps)
16:17:37: INFO: {percent files transferred 29.36%}
16:17:39: INFO: Overall to target 24.149 seconds (4.13 MBps)
16:17:39: INFO: {percent files transferred 29.62%}
16:17:41: INFO: Overall to target 26.162 seconds (4.13 MBps)
16:17:41: INFO: {percent files transferred 29.88%}
16:17:43: INFO: Overall to target 28.174 seconds (4.13 MBps)
16:17:43: INFO: {percent files transferred 30.14%}
16:17:45: INFO: Overall to target 30.186 seconds (4.13 MBps)
16:17:45: INFO: {percent files transferred 30.40%}
16:17:45: INFO: Overall to target 30.264 seconds (4.13 MBps)
16:17:45: INFO: {percent files transferred 30.41%}
16:17:45: INFO: TARGET SAID: 'Finished sector address 288000'
16:17:45: INFO:
16:17:45: INFO: =======================================================
16:17:45: INFO: ==================== {SUCCESS} ========================
16:17:45: INFO: =======================================================
16:17:45: INFO: {percent files transferred 30.41%}
16:17:45: INFO: In handleProgram('system_2625488.bin')
16:17:45: INFO: Looking for file 'system_2625488.bin'
16:17:45: INFO: =======================================================
16:17:45: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2625488.bin'}
16:17:45: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:17:45: INFO: =======================================================
16:17:45: INFO: TARGET SAID: 'start 32000, num 259072'
16:17:47: INFO: Overall to target 2.013 seconds (4.13 MBps)
16:17:47: INFO: {percent files transferred 30.67%}
16:17:49: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:17:49: INFO: {percent files transferred 30.93%}
16:17:51: INFO: Overall to target 6.037 seconds (4.12 MBps)
16:17:51: INFO: {percent files transferred 31.19%}
16:17:53: INFO: Overall to target 8.050 seconds (4.13 MBps)
16:17:53: INFO: {percent files transferred 31.46%}
16:17:55: INFO: Overall to target 10.062 seconds (4.13 MBps)
16:17:55: INFO: {percent files transferred 31.72%}
16:17:57: INFO: Overall to target 12.075 seconds (4.13 MBps)
16:17:57: INFO: {percent files transferred 31.98%}
16:17:59: INFO: Overall to target 14.087 seconds (4.13 MBps)
16:17:59: INFO: {percent files transferred 32.24%}
16:18:01: INFO: Overall to target 16.099 seconds (4.14 MBps)
16:18:01: INFO: {percent files transferred 32.50%}
16:18:03: INFO: Overall to target 18.112 seconds (4.01 MBps)
16:18:03: INFO: {percent files transferred 32.69%}
16:18:05: INFO: Overall to target 20.124 seconds (4.01 MBps)
16:18:05: INFO: {percent files transferred 32.94%}
16:18:07: INFO: FILE ACCESS SLOW!! 87.85 MB in 1.017 seconds ( 86.38 MBps) --- Overall to target 22.137 seconds (3.97 MBps)
16:18:07: INFO: {percent files transferred 33.17%}
16:18:09: INFO: FILE ACCESS SLOW!! 96.14 MB in 1.049 seconds ( 91.65 MBps) --- Overall to target 24.149 seconds (3.98 MBps)
16:18:09: INFO: {percent files transferred 33.43%}
16:18:11: INFO: FILE ACCESS SLOW!! 104.32 MB in 1.129 seconds ( 92.40 MBps) --- Overall to target 26.162 seconds (3.99 MBps)
16:18:11: INFO: {percent files transferred 33.68%}
16:18:13: INFO: FILE ACCESS SLOW!! 110.83 MB in 1.596 seconds ( 69.44 MBps) --- Overall to target 28.174 seconds (3.93 MBps)
16:18:13: INFO: {percent files transferred 33.89%}
16:18:15: INFO: FILE ACCESS SLOW!! 118.95 MB in 1.626 seconds ( 73.16 MBps) --- Overall to target 30.186 seconds (3.94 MBps)
16:18:15: INFO: {percent files transferred 34.14%}
16:18:17: INFO: Overall to target 32.012 seconds (3.95 MBps)
16:18:17: INFO: {percent files transferred 34.38%}
16:18:17: INFO: TARGET SAID: 'Finished sector address 291072'
16:18:17: INFO:
16:18:17: INFO: =======================================================
16:18:17: INFO: ==================== {SUCCESS} ========================
16:18:17: INFO: =======================================================
16:18:17: INFO: {percent files transferred 34.38%}
16:18:17: INFO: In handleProgram('system_2885768.bin')
16:18:17: INFO: Looking for file 'system_2885768.bin'
16:18:17: INFO: =======================================================
16:18:17: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2885768.bin'}
16:18:17: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:18:17: INFO: =======================================================
16:18:17: INFO: TARGET SAID: 'start 32000, num 1024'
16:18:17: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:18:17: INFO: {percent files transferred 34.39%}
16:18:17: INFO: TARGET SAID: 'Finished sector address 33024'
16:18:17: INFO:
16:18:17: INFO: =======================================================
16:18:17: INFO: ==================== {SUCCESS} ========================
16:18:17: INFO: =======================================================
16:18:17: INFO: {percent files transferred 34.39%}
16:18:17: INFO: In handleProgram('system_2889816.bin')
16:18:17: INFO: Looking for file 'system_2889816.bin'
16:18:17: INFO: =======================================================
16:18:17: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2889816.bin'}
16:18:17: INFO: {<program> (125.00 MB) 256000 sectors needed at location 0 on LUN 0}
16:18:17: INFO: =======================================================
16:18:17: INFO: TARGET SAID: 'start 32000, num 256000'
16:18:19: INFO: Overall to target 2.012 seconds (4.05 MBps)
16:18:19: INFO: {percent files transferred 34.65%}
16:18:22: INFO: Overall to target 4.024 seconds (4.09 MBps)
16:18:22: INFO: {percent files transferred 34.91%}
16:18:24: INFO: FILE ACCESS SLOW!! 23.95 MB in 0.498 seconds ( 48.08 MBps) --- Overall to target 6.224 seconds (3.85 MBps)
16:18:24: INFO: {percent files transferred 35.14%}
16:18:26: INFO: FILE ACCESS SLOW!! 28.95 MB in 1.369 seconds ( 21.15 MBps) --- Overall to target 8.236 seconds (3.52 MBps)
16:18:26: INFO: {percent files transferred 35.30%}
16:18:28: INFO: FILE ACCESS SLOW!! 37.02 MB in 1.478 seconds ( 25.04 MBps) --- Overall to target 10.249 seconds (3.61 MBps)
16:18:28: INFO: {percent files transferred 35.55%}
16:18:30: INFO: FILE ACCESS SLOW!! 42.83 MB in 2.009 seconds ( 21.32 MBps) --- Overall to target 12.261 seconds (3.49 MBps)
16:18:30: INFO: {percent files transferred 35.74%}
16:18:32: INFO: FILE ACCESS SLOW!! 51.03 MB in 2.009 seconds ( 25.40 MBps) --- Overall to target 14.274 seconds (3.58 MBps)
16:18:32: INFO: {percent files transferred 35.99%}
16:18:34: INFO: FILE ACCESS SLOW!! 59.12 MB in 2.009 seconds ( 29.43 MBps) --- Overall to target 16.286 seconds (3.63 MBps)
16:18:34: INFO: {percent files transferred 36.25%}
16:18:36: INFO: FILE ACCESS SLOW!! 67.35 MB in 2.040 seconds ( 33.02 MBps) --- Overall to target 18.298 seconds (3.68 MBps)
16:18:36: INFO: {percent files transferred 36.51%}
16:18:38: INFO: FILE ACCESS SLOW!! 75.68 MB in 2.072 seconds ( 36.52 MBps) --- Overall to target 20.311 seconds (3.73 MBps)
16:18:38: INFO: {percent files transferred 36.77%}
16:18:40: INFO: FILE ACCESS SLOW!! 83.97 MB in 2.118 seconds ( 39.65 MBps) --- Overall to target 22.323 seconds (3.76 MBps)
16:18:40: INFO: {percent files transferred 37.03%}
16:18:42: INFO: FILE ACCESS SLOW!! 92.14 MB in 2.211 seconds ( 41.67 MBps) --- Overall to target 24.336 seconds (3.79 MBps)
16:18:42: INFO: {percent files transferred 37.28%}
16:18:44: INFO: FILE ACCESS SLOW!! 100.24 MB in 2.337 seconds ( 42.89 MBps) --- Overall to target 26.348 seconds (3.80 MBps)
16:18:44: INFO: {percent files transferred 37.54%}
16:18:46: INFO: FILE ACCESS SLOW!! 108.54 MB in 2.337 seconds ( 46.44 MBps) --- Overall to target 28.361 seconds (3.83 MBps)
16:18:46: INFO: {percent files transferred 37.80%}
16:18:48: INFO: FILE ACCESS SLOW!! 116.88 MB in 2.337 seconds ( 50.01 MBps) --- Overall to target 30.373 seconds (3.85 MBps)
16:18:48: INFO: {percent files transferred 38.06%}
16:18:50: INFO: Overall to target 32.339 seconds (3.87 MBps)
16:18:50: INFO: {percent files transferred 38.31%}
16:18:50: INFO: TARGET SAID: 'Finished sector address 288000'
16:18:50: INFO:
16:18:50: INFO: =======================================================
16:18:50: INFO: ==================== {SUCCESS} ========================
16:18:50: INFO: =======================================================
16:18:50: INFO: {percent files transferred 38.31%}
16:18:50: INFO: In handleProgram('system_3149776.bin')
16:18:50: INFO: Looking for file 'system_3149776.bin'
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
16:18:50: WARNING: User requested to ONLY program num_partition_sectors 250672 of 'system_3149776.bin' (122.40 MB).
To load this file completely would require 259072 sectors (126.50 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
16:18:50: INFO: =======================================================
16:18:50: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3149776.bin'}
16:18:50: INFO: {<program> (126.50 MB) 250672 sectors needed at location 0 on LUN 0}
16:18:50: INFO: =======================================================
16:18:50: INFO: TARGET SAID: 'start 32000, num 250672'
16:18:52: INFO: FILE ACCESS SLOW!! 7.34 MB in 0.094 seconds ( 78.13 MBps) --- Overall to target 2.013 seconds (3.65 MBps)
16:18:52: INFO: {percent files transferred 38.54%}
16:18:54: INFO: FILE ACCESS SLOW!! 15.18 MB in 0.202 seconds ( 75.15 MBps) --- Overall to target 4.025 seconds (3.77 MBps)
16:18:54: INFO: {percent files transferred 38.79%}
16:18:56: INFO: FILE ACCESS SLOW!! 23.16 MB in 0.266 seconds ( 87.08 MBps) --- Overall to target 6.038 seconds (3.84 MBps)
16:18:56: INFO: {percent files transferred 39.04%}
16:18:58: INFO: FILE ACCESS SLOW!! 31.13 MB in 0.360 seconds ( 86.46 MBps) --- Overall to target 8.050 seconds (3.87 MBps)
16:18:58: INFO: {percent files transferred 39.29%}
16:19:00: INFO: Overall to target 10.062 seconds (3.90 MBps)
16:19:00: INFO: {percent files transferred 39.54%}
16:19:02: INFO: Overall to target 12.075 seconds (3.94 MBps)
16:19:02: INFO: {percent files transferred 39.80%}
16:19:04: INFO: Overall to target 14.087 seconds (3.97 MBps)
16:19:04: INFO: {percent files transferred 40.07%}
16:19:06: INFO: Overall to target 16.100 seconds (3.99 MBps)
16:19:06: INFO: {percent files transferred 40.33%}
16:19:08: INFO: Overall to target 18.112 seconds (4.01 MBps)
16:19:08: INFO: {percent files transferred 40.59%}
16:19:10: INFO: Overall to target 20.124 seconds (4.02 MBps)
16:19:10: INFO: {percent files transferred 40.85%}
16:19:12: INFO: Overall to target 22.137 seconds (4.03 MBps)
16:19:12: INFO: {percent files transferred 41.11%}
16:19:14: INFO: Overall to target 24.149 seconds (4.03 MBps)
16:19:14: INFO: {percent files transferred 41.37%}
16:19:16: INFO: Overall to target 26.162 seconds (4.04 MBps)
16:19:16: INFO: {percent files transferred 41.62%}
16:19:18: INFO: Overall to target 28.174 seconds (4.01 MBps)
16:19:18: INFO: {percent files transferred 41.86%}
16:19:20: INFO: Overall to target 30.187 seconds (4.01 MBps)
16:19:20: INFO: {percent files transferred 42.11%}
16:19:21: INFO: Overall to target 30.483 seconds (4.02 MBps)
16:19:21: INFO: {percent files transferred 42.15%}
16:19:21: INFO: TARGET SAID: 'Finished sector address 282672'
16:19:21: INFO:
16:19:21: INFO: =======================================================
16:19:21: INFO: ==================== {SUCCESS} ========================
16:19:21: INFO: =======================================================
16:19:21: INFO: {percent files transferred 42.15%}
16:19:21: INFO: In handleProgram('system_3410056.bin')
16:19:21: INFO: Looking for file 'system_3410056.bin'
16:19:21: INFO: =======================================================
16:19:21: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3410056.bin'}
16:19:21: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:19:21: INFO: =======================================================
16:19:21: INFO: TARGET SAID: 'start 32000, num 1024'
16:19:21: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:19:21: INFO: {percent files transferred 42.17%}
16:19:21: INFO: TARGET SAID: 'Finished sector address 33024'
16:19:21: INFO:
16:19:21: INFO: =======================================================
16:19:21: INFO: ==================== {SUCCESS} ========================
16:19:21: INFO: =======================================================
16:19:21: INFO: {percent files transferred 42.17%}
16:19:21: INFO: In handleProgram('system_3414104.bin')
16:19:21: INFO: Looking for file 'system_3414104.bin'
16:19:21: INFO: =======================================================
16:19:21: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3414104.bin'}
16:19:21: INFO: {<program> (125.00 MB) 256000 sectors needed at location 0 on LUN 0}
16:19:21: INFO: =======================================================
16:19:21: INFO: TARGET SAID: 'start 32000, num 256000'
16:19:23: INFO: Overall to target 2.012 seconds (4.12 MBps)
16:19:23: INFO: {percent files transferred 42.43%}
16:19:25: INFO: Overall to target 4.024 seconds (4.12 MBps)
16:19:25: INFO: {percent files transferred 42.69%}
16:19:27: INFO: Overall to target 6.037 seconds (4.06 MBps)
16:19:27: INFO: {percent files transferred 42.93%}
16:19:29: INFO: FILE ACCESS SLOW!! 31.54 MB in 0.516 seconds ( 61.12 MBps) --- Overall to target 8.049 seconds (3.92 MBps)
16:19:29: INFO: {percent files transferred 43.16%}
16:19:31: INFO: FILE ACCESS SLOW!! 39.80 MB in 0.563 seconds ( 70.70 MBps) --- Overall to target 10.062 seconds (3.96 MBps)
16:19:31: INFO: {percent files transferred 43.41%}
16:19:33: INFO: FILE ACCESS SLOW!! 48.09 MB in 0.563 seconds ( 85.41 MBps) --- Overall to target 12.074 seconds (3.98 MBps)
16:19:33: INFO: {percent files transferred 43.67%}
16:19:35: INFO: FILE ACCESS SLOW!! 54.57 MB in 0.845 seconds ( 64.58 MBps) --- Overall to target 14.086 seconds (3.87 MBps)
16:19:35: INFO: {percent files transferred 43.88%}
16:19:37: INFO: FILE ACCESS SLOW!! 62.86 MB in 0.907 seconds ( 69.30 MBps) --- Overall to target 16.099 seconds (3.90 MBps)
16:19:37: INFO: {percent files transferred 44.14%}
16:19:39: INFO: FILE ACCESS SLOW!! 71.02 MB in 0.986 seconds ( 72.02 MBps) --- Overall to target 18.111 seconds (3.92 MBps)
16:19:39: INFO: {percent files transferred 44.39%}
16:19:41: INFO: FILE ACCESS SLOW!! 78.95 MB in 1.157 seconds ( 68.23 MBps) --- Overall to target 20.124 seconds (3.92 MBps)
16:19:41: INFO: {percent files transferred 44.64%}
16:19:43: INFO: FILE ACCESS SLOW!! 86.81 MB in 1.204 seconds ( 72.10 MBps) --- Overall to target 22.136 seconds (3.92 MBps)
16:19:43: INFO: {percent files transferred 44.89%}
16:19:45: INFO: FILE ACCESS SLOW!! 94.91 MB in 1.235 seconds ( 76.85 MBps) --- Overall to target 24.149 seconds (3.93 MBps)
16:19:45: INFO: {percent files transferred 45.14%}
16:19:47: INFO: FILE ACCESS SLOW!! 103.23 MB in 1.235 seconds ( 83.59 MBps) --- Overall to target 26.161 seconds (3.95 MBps)
16:19:47: INFO: {percent files transferred 45.40%}
16:19:49: INFO: FILE ACCESS SLOW!! 111.55 MB in 1.267 seconds ( 88.04 MBps) --- Overall to target 28.173 seconds (3.96 MBps)
16:19:49: INFO: {percent files transferred 45.66%}
16:19:51: INFO: FILE ACCESS SLOW!! 119.60 MB in 1.424 seconds ( 83.99 MBps) --- Overall to target 30.186 seconds (3.96 MBps)
16:19:51: INFO: {percent files transferred 45.92%}
16:19:53: INFO: Overall to target 31.481 seconds (3.97 MBps)
16:19:53: INFO: {percent files transferred 46.09%}
16:19:53: INFO: TARGET SAID: 'Finished sector address 288000'

16:19:53: INFO:
16:19:53: INFO: =======================================================
16:19:53: INFO: ==================== {SUCCESS} ========================
16:19:53: INFO: =======================================================
16:19:53: INFO: {percent files transferred 46.09%}
16:19:53: INFO: In handleProgram('system_3674064.bin')
16:19:53: INFO: Looking for file 'system_3674064.bin'
16:19:53: INFO: =======================================================
16:19:53: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3674064.bin'}
16:19:53: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:19:53: INFO: =======================================================
16:19:53: INFO: TARGET SAID: 'start 32000, num 259072'
16:19:55: INFO: Overall to target 2.013 seconds (4.10 MBps)
16:19:55: INFO: {percent files transferred 46.34%}
16:19:57: INFO: Overall to target 4.025 seconds (4.13 MBps)
16:19:57: INFO: {percent files transferred 46.61%}
16:19:59: INFO: Overall to target 6.038 seconds (4.13 MBps)
16:19:59: INFO: {percent files transferred 46.87%}
16:20:01: INFO: Overall to target 8.050 seconds (4.12 MBps)
16:20:01: INFO: {percent files transferred 47.13%}
16:20:03: INFO: Overall to target 10.062 seconds (4.13 MBps)
16:20:03: INFO: {percent files transferred 47.39%}
16:20:05: INFO: Overall to target 12.075 seconds (4.13 MBps)
16:20:05: INFO: {percent files transferred 47.65%}
16:20:07: INFO: Overall to target 14.087 seconds (4.14 MBps)
16:20:07: INFO: {percent files transferred 47.91%}
16:20:09: INFO: Overall to target 16.100 seconds (4.14 MBps)
16:20:09: INFO: {percent files transferred 48.18%}
16:20:11: INFO: Overall to target 18.112 seconds (4.14 MBps)
16:20:11: INFO: {percent files transferred 48.44%}
16:20:13: INFO: Overall to target 20.125 seconds (4.14 MBps)
16:20:13: INFO: {percent files transferred 48.70%}
16:20:15: INFO: Overall to target 22.137 seconds (4.14 MBps)
16:20:15: INFO: {percent files transferred 48.96%}
16:20:17: INFO: Overall to target 24.149 seconds (4.14 MBps)
16:20:17: INFO: {percent files transferred 49.22%}
16:20:19: INFO: Overall to target 26.162 seconds (4.15 MBps)
16:20:19: INFO: {percent files transferred 49.49%}
16:20:21: INFO: Overall to target 28.174 seconds (4.14 MBps)
16:20:21: INFO: {percent files transferred 49.75%}
16:20:23: INFO: Overall to target 30.187 seconds (4.15 MBps)
16:20:23: INFO: {percent files transferred 50.01%}
16:20:23: INFO: Overall to target 30.514 seconds (4.15 MBps)
16:20:23: INFO: {percent files transferred 50.05%}
16:20:23: INFO: TARGET SAID: 'Finished sector address 291072'
16:20:23: INFO:
16:20:23: INFO: =======================================================
16:20:23: INFO: ==================== {SUCCESS} ========================
16:20:23: INFO: =======================================================
16:20:23: INFO: {percent files transferred 50.05%}
16:20:23: INFO: In handleProgram('system_3936208.bin')
16:20:23: INFO: Looking for file 'system_3936208.bin'
16:20:23: INFO: =======================================================
16:20:23: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3936208.bin'}
16:20:23: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:20:23: INFO: =======================================================
16:20:23: INFO: TARGET SAID: 'start 32000, num 259072'
16:20:25: INFO: Overall to target 2.013 seconds (4.06 MBps)
16:20:25: INFO: {percent files transferred 50.31%}
16:20:27: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:20:27: INFO: {percent files transferred 50.57%}
16:20:29: INFO: Overall to target 6.038 seconds (4.12 MBps)
16:20:29: INFO: {percent files transferred 50.83%}
16:20:32: INFO: Overall to target 8.050 seconds (4.13 MBps)
16:20:32: INFO: {percent files transferred 51.09%}
16:20:34: INFO: Overall to target 10.062 seconds (4.12 MBps)
16:20:34: INFO: {percent files transferred 51.35%}
16:20:36: INFO: Overall to target 12.075 seconds (4.12 MBps)
16:20:36: INFO: {percent files transferred 51.61%}
16:20:38: INFO: Overall to target 14.087 seconds (4.13 MBps)
16:20:38: INFO: {percent files transferred 51.88%}
16:20:40: INFO: Overall to target 16.100 seconds (4.14 MBps)
16:20:40: INFO: {percent files transferred 52.14%}
16:20:42: INFO: Overall to target 18.112 seconds (4.14 MBps)
16:20:42: INFO: {percent files transferred 52.40%}
16:20:44: INFO: Overall to target 20.124 seconds (4.14 MBps)
16:20:44: INFO: {percent files transferred 52.66%}
16:20:46: INFO: Overall to target 22.137 seconds (4.14 MBps)
16:20:46: INFO: {percent files transferred 52.92%}
16:20:48: INFO: Overall to target 24.149 seconds (4.14 MBps)
16:20:48: INFO: {percent files transferred 53.19%}
16:20:50: INFO: Overall to target 26.162 seconds (4.14 MBps)
16:20:50: INFO: {percent files transferred 53.45%}
16:20:52: INFO: Overall to target 28.174 seconds (4.14 MBps)
16:20:52: INFO: {percent files transferred 53.71%}
16:20:54: INFO: Overall to target 30.187 seconds (4.14 MBps)
16:20:54: INFO: {percent files transferred 53.97%}
16:20:54: INFO: Overall to target 30.530 seconds (4.14 MBps)
16:20:54: INFO: {percent files transferred 54.02%}
16:20:54: INFO: TARGET SAID: 'Finished sector address 291072'
16:20:54: INFO:
16:20:54: INFO: =======================================================
16:20:54: INFO: ==================== {SUCCESS} ========================
16:20:54: INFO: =======================================================
16:20:54: INFO: {percent files transferred 54.02%}
16:20:54: INFO: In handleProgram('system_4198352.bin')
16:20:54: INFO: Looking for file 'system_4198352.bin'
16:20:54: INFO: =======================================================
16:20:54: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_4198352.bin'}
16:20:54: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:20:54: INFO: =======================================================
16:20:54: INFO: TARGET SAID: 'start 32000, num 259072'
16:20:56: INFO: Overall to target 2.012 seconds (4.16 MBps)
16:20:56: INFO: {percent files transferred 54.28%}
16:20:58: INFO: Overall to target 4.024 seconds (4.17 MBps)
16:20:58: INFO: {percent files transferred 54.54%}
16:21:00: INFO: Overall to target 6.037 seconds (4.16 MBps)
16:21:00: INFO: {percent files transferred 54.81%}
16:21:02: INFO: Overall to target 8.049 seconds (4.15 MBps)
16:21:02: INFO: {percent files transferred 55.07%}
16:21:04: INFO: Overall to target 10.062 seconds (4.15 MBps)
16:21:04: INFO: {percent files transferred 55.33%}
16:21:06: INFO: Overall to target 12.074 seconds (4.16 MBps)
16:21:06: INFO: {percent files transferred 55.59%}
16:21:08: INFO: Overall to target 14.086 seconds (4.16 MBps)
16:21:08: INFO: {percent files transferred 55.85%}
16:21:10: INFO: Overall to target 16.099 seconds (4.15 MBps)
16:21:10: INFO: {percent files transferred 56.11%}
16:21:12: INFO: Overall to target 18.111 seconds (4.15 MBps)
16:21:12: INFO: {percent files transferred 56.38%}
16:21:14: INFO: Overall to target 20.124 seconds (4.16 MBps)
16:21:14: INFO: {percent files transferred 56.64%}
16:21:16: INFO: Overall to target 22.136 seconds (4.15 MBps)
16:21:16: INFO: {percent files transferred 56.90%}
16:21:18: INFO: Overall to target 24.149 seconds (4.15 MBps)
16:21:18: INFO: {percent files transferred 57.16%}
16:21:20: INFO: Overall to target 26.161 seconds (4.15 MBps)
16:21:20: INFO: {percent files transferred 57.42%}
16:21:22: INFO: Overall to target 28.173 seconds (4.15 MBps)
16:21:22: INFO: {percent files transferred 57.69%}
16:21:24: INFO: Overall to target 30.186 seconds (4.15 MBps)
16:21:24: INFO: {percent files transferred 57.95%}
16:21:25: INFO: Overall to target 30.451 seconds (4.15 MBps)
16:21:25: INFO: {percent files transferred 57.98%}
16:21:25: INFO: TARGET SAID: 'Finished sector address 291072'
16:21:25: INFO:
16:21:25: INFO: =======================================================
16:21:25: INFO: ==================== {SUCCESS} ========================
16:21:25: INFO: =======================================================
16:21:25: INFO: {percent files transferred 57.98%}
16:21:25: INFO: In handleProgram('system_4722640.bin')
16:21:25: INFO: Looking for file 'system_4722640.bin'
16:21:25: INFO: =======================================================
16:21:25: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_4722640.bin'}
16:21:25: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:21:25: INFO: =======================================================
16:21:25: INFO: TARGET SAID: 'start 32000, num 259072'
16:21:27: INFO: Overall to target 2.013 seconds (4.06 MBps)
16:21:27: INFO: {percent files transferred 58.24%}
16:21:29: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:21:29: INFO: {percent files transferred 58.50%}
16:21:31: INFO: Overall to target 6.037 seconds (4.13 MBps)
16:21:31: INFO: {percent files transferred 58.76%}
16:21:33: INFO: Overall to target 8.050 seconds (4.12 MBps)
16:21:33: INFO: {percent files transferred 59.02%}
16:21:35: INFO: Overall to target 10.062 seconds (4.13 MBps)
16:21:35: INFO: {percent files transferred 59.29%}
16:21:37: INFO: Overall to target 12.075 seconds (4.14 MBps)
16:21:37: INFO: {percent files transferred 59.55%}
16:21:39: INFO: Overall to target 14.087 seconds (4.14 MBps)
16:21:39: INFO: {percent files transferred 59.81%}
16:21:41: INFO: Overall to target 16.099 seconds (4.14 MBps)
16:21:41: INFO: {percent files transferred 60.08%}
16:21:43: INFO: Overall to target 18.112 seconds (4.14 MBps)
16:21:43: INFO: {percent files transferred 60.34%}
16:21:45: INFO: Overall to target 20.124 seconds (4.15 MBps)
16:21:45: INFO: {percent files transferred 60.60%}
16:21:47: INFO: Overall to target 22.137 seconds (4.14 MBps)
16:21:47: INFO: {percent files transferred 60.86%}
16:21:49: INFO: Overall to target 24.149 seconds (4.14 MBps)
16:21:49: INFO: {percent files transferred 61.12%}
16:21:51: INFO: Overall to target 26.162 seconds (4.14 MBps)
16:21:51: INFO: {percent files transferred 61.38%}
16:21:53: INFO: Overall to target 28.174 seconds (4.14 MBps)
16:21:53: INFO: {percent files transferred 61.64%}
16:21:55: INFO: Overall to target 30.186 seconds (4.15 MBps)
16:21:55: INFO: {percent files transferred 61.91%}
16:21:55: INFO: Overall to target 30.514 seconds (4.15 MBps)
16:21:55: INFO: {percent files transferred 61.95%}
16:21:55: INFO: TARGET SAID: 'Finished sector address 291072'
16:21:55: INFO:
16:21:55: INFO: =======================================================
16:21:55: INFO: ==================== {SUCCESS} ========================
16:21:55: INFO: =======================================================
16:21:55: INFO: {percent files transferred 61.95%}
16:21:55: INFO: In handleProgram('system_4984784.bin')
16:21:55: INFO: Looking for file 'system_4984784.bin'
16:21:55: INFO: =======================================================
16:21:55: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_4984784.bin'}
16:21:55: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:21:55: INFO: =======================================================
16:21:56: INFO: TARGET SAID: 'start 32000, num 259072'
16:21:58: INFO: Overall to target 2.012 seconds (4.08 MBps)
16:21:58: INFO: {percent files transferred 62.21%}
16:22:00: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:22:00: INFO: {percent files transferred 62.47%}
16:22:02: INFO: Overall to target 6.037 seconds (4.14 MBps)
16:22:02: INFO: {percent files transferred 62.73%}
16:22:04: INFO: Overall to target 8.049 seconds (4.13 MBps)
16:22:04: INFO: {percent files transferred 62.99%}
16:22:06: INFO: Overall to target 10.062 seconds (4.13 MBps)
16:22:06: INFO: {percent files transferred 63.25%}
16:22:08: INFO: Overall to target 12.074 seconds (4.14 MBps)
16:22:08: INFO: {percent files transferred 63.52%}
16:22:10: INFO: Overall to target 14.087 seconds (4.14 MBps)
16:22:10: INFO: {percent files transferred 63.78%}
16:22:12: INFO: Overall to target 16.099 seconds (4.14 MBps)
16:22:12: INFO: {percent files transferred 64.04%}
16:22:14: INFO: Overall to target 18.111 seconds (4.14 MBps)
16:22:14: INFO: {percent files transferred 64.30%}
16:22:16: INFO: Overall to target 20.124 seconds (4.15 MBps)
16:22:16: INFO: {percent files transferred 64.57%}
16:22:18: INFO: Overall to target 22.136 seconds (4.14 MBps)
16:22:18: INFO: {percent files transferred 64.83%}
16:22:20: INFO: Overall to target 24.149 seconds (4.14 MBps)
16:22:20: INFO: {percent files transferred 65.09%}
16:22:22: INFO: Overall to target 26.161 seconds (4.14 MBps)
16:22:22: INFO: {percent files transferred 65.35%}
16:22:24: INFO: Overall to target 28.174 seconds (4.15 MBps)
16:22:24: INFO: {percent files transferred 65.61%}
16:22:26: INFO: Overall to target 30.186 seconds (4.15 MBps)
16:22:26: INFO: {percent files transferred 65.87%}
16:22:26: INFO: Overall to target 30.498 seconds (4.15 MBps)
16:22:26: INFO: {percent files transferred 65.92%}
16:22:26: INFO: TARGET SAID: 'Finished sector address 291072'

16:22:26: INFO:
16:22:26: INFO: =======================================================
16:22:26: INFO: ==================== {SUCCESS} ========================
16:22:26: INFO: =======================================================
16:22:26: INFO: {percent files transferred 65.92%}
16:22:26: INFO: In handleProgram('system_5246928.bin')
16:22:26: INFO: Looking for file 'system_5246928.bin'
16:22:26: INFO: =======================================================
16:22:26: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_5246928.bin'}
16:22:26: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:22:26: INFO: =======================================================
16:22:26: INFO: TARGET SAID: 'start 32000, num 259072'
16:22:28: INFO: Overall to target 2.012 seconds (4.07 MBps)
16:22:28: INFO: {percent files transferred 66.17%}
16:22:30: INFO: Overall to target 4.025 seconds (4.09 MBps)
16:22:30: INFO: {percent files transferred 66.43%}
16:22:32: INFO: Overall to target 6.037 seconds (4.12 MBps)
16:22:32: INFO: {percent files transferred 66.70%}
16:22:34: INFO: Overall to target 8.049 seconds (4.12 MBps)
16:22:34: INFO: {percent files transferred 66.96%}
16:22:36: INFO: Overall to target 10.062 seconds (4.13 MBps)
16:22:36: INFO: {percent files transferred 67.22%}
16:22:38: INFO: Overall to target 12.074 seconds (4.13 MBps)
16:22:38: INFO: {percent files transferred 67.48%}
16:22:40: INFO: Overall to target 14.087 seconds (4.13 MBps)
16:22:40: INFO: {percent files transferred 67.74%}
16:22:42: INFO: Overall to target 16.099 seconds (4.14 MBps)
16:22:42: INFO: {percent files transferred 68.01%}
16:22:44: INFO: Overall to target 18.111 seconds (4.14 MBps)
16:22:44: INFO: {percent files transferred 68.27%}
16:22:46: INFO: Overall to target 20.124 seconds (4.14 MBps)
16:22:46: INFO: {percent files transferred 68.53%}
16:22:48: INFO: Overall to target 22.136 seconds (4.14 MBps)
16:22:48: INFO: {percent files transferred 68.79%}
16:22:50: INFO: Overall to target 24.149 seconds (4.14 MBps)
16:22:50: INFO: {percent files transferred 69.05%}
16:22:52: INFO: Overall to target 26.161 seconds (4.14 MBps)
16:22:52: INFO: {percent files transferred 69.31%}
16:22:54: INFO: Overall to target 28.174 seconds (4.14 MBps)
16:22:54: INFO: {percent files transferred 69.58%}
16:22:56: INFO: Overall to target 30.186 seconds (4.14 MBps)
16:22:56: INFO: {percent files transferred 69.84%}
16:22:57: INFO: Overall to target 30.514 seconds (4.15 MBps)
16:22:57: INFO: {percent files transferred 69.88%}
16:22:57: INFO: TARGET SAID: 'Finished sector address 291072'
16:22:57: INFO:
16:22:57: INFO: =======================================================
16:22:57: INFO: ==================== {SUCCESS} ========================
16:22:57: INFO: =======================================================
16:22:57: INFO: {percent files transferred 69.88%}
16:22:57: INFO: In handleProgram('system_5509072.bin')
16:22:57: INFO: Looking for file 'system_5509072.bin'
16:22:57: INFO: =======================================================
16:22:57: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_5509072.bin'}
16:22:57: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:22:57: INFO: =======================================================
16:22:57: INFO: TARGET SAID: 'start 32000, num 259072'
16:22:59: INFO: Overall to target 2.013 seconds (4.04 MBps)
16:22:59: INFO: {percent files transferred 70.14%}
16:23:01: INFO: Overall to target 4.025 seconds (4.10 MBps)
16:23:01: INFO: {percent files transferred 70.40%}
16:23:03: INFO: Overall to target 6.038 seconds (4.12 MBps)
16:23:03: INFO: {percent files transferred 70.66%}
16:23:05: INFO: Overall to target 8.050 seconds (4.12 MBps)
16:23:05: INFO: {percent files transferred 70.92%}
16:23:07: INFO: Overall to target 10.062 seconds (4.13 MBps)
16:23:07: INFO: {percent files transferred 71.19%}
16:23:09: INFO: Overall to target 12.075 seconds (4.14 MBps)
16:23:09: INFO: {percent files transferred 71.45%}
16:23:11: INFO: Overall to target 14.087 seconds (4.14 MBps)
16:23:11: INFO: {percent files transferred 71.71%}
16:23:13: INFO: Overall to target 16.100 seconds (4.14 MBps)
16:23:13: INFO: {percent files transferred 71.97%}
16:23:15: INFO: Overall to target 18.112 seconds (4.14 MBps)
16:23:15: INFO: {percent files transferred 72.24%}
16:23:17: INFO: Overall to target 20.124 seconds (4.14 MBps)
16:23:17: INFO: {percent files transferred 72.49%}
16:23:19: INFO: Overall to target 22.137 seconds (4.14 MBps)
16:23:19: INFO: {percent files transferred 72.76%}
16:23:21: INFO: Overall to target 24.149 seconds (4.14 MBps)
16:23:21: INFO: {percent files transferred 73.02%}
16:23:23: INFO: Overall to target 26.162 seconds (4.14 MBps)
16:23:23: INFO: {percent files transferred 73.28%}
16:23:25: INFO: Overall to target 28.174 seconds (4.14 MBps)
16:23:25: INFO: {percent files transferred 73.54%}
16:23:27: INFO: Overall to target 30.187 seconds (4.14 MBps)
16:23:27: INFO: {percent files transferred 73.80%}
16:23:27: INFO: Overall to target 30.530 seconds (4.14 MBps)
16:23:27: INFO: {percent files transferred 73.85%}
16:23:28: INFO: TARGET SAID: 'Finished sector address 291072'
16:23:28: INFO:
16:23:28: INFO: =======================================================
16:23:28: INFO: ==================== {SUCCESS} ========================
16:23:28: INFO: =======================================================
16:23:28: INFO: {percent files transferred 73.85%}
16:23:28: INFO: In handleProgram('system_5771216.bin')
16:23:28: INFO: Looking for file 'system_5771216.bin'
16:23:28: INFO: =======================================================
16:23:28: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_5771216.bin'}
16:23:28: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:23:28: INFO: =======================================================
16:23:28: INFO: TARGET SAID: 'start 32000, num 259072'
16:23:30: INFO: Overall to target 2.012 seconds (4.06 MBps)
16:23:30: INFO: {percent files transferred 74.10%}
16:23:32: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:23:32: INFO: {percent files transferred 74.37%}
16:23:34: INFO: Overall to target 6.037 seconds (4.13 MBps)
16:23:34: INFO: {percent files transferred 74.63%}
16:23:36: INFO: Overall to target 8.050 seconds (4.13 MBps)
16:23:36: INFO: {percent files transferred 74.89%}
16:23:38: INFO: Overall to target 10.062 seconds (4.14 MBps)
16:23:38: INFO: {percent files transferred 75.15%}
16:23:40: INFO: Overall to target 12.074 seconds (4.14 MBps)
16:23:40: INFO: {percent files transferred 75.42%}
16:23:42: INFO: Overall to target 14.087 seconds (4.15 MBps)
16:23:42: INFO: {percent files transferred 75.68%}
16:23:44: INFO: Overall to target 16.099 seconds (4.15 MBps)
16:23:44: INFO: {percent files transferred 75.94%}
16:23:46: INFO: Overall to target 18.112 seconds (4.15 MBps)
16:23:46: INFO: {percent files transferred 76.20%}
16:23:48: INFO: Overall to target 20.124 seconds (4.15 MBps)
16:23:48: INFO: {percent files transferred 76.47%}
16:23:50: INFO: Overall to target 22.136 seconds (4.15 MBps)
16:23:50: INFO: {percent files transferred 76.73%}
16:23:52: INFO: Overall to target 24.149 seconds (4.15 MBps)
16:23:52: INFO: {percent files transferred 76.99%}
16:23:54: INFO: Overall to target 26.161 seconds (4.15 MBps)
16:23:54: INFO: {percent files transferred 77.25%}
16:23:56: INFO: Overall to target 28.174 seconds (4.15 MBps)
16:23:56: INFO: {percent files transferred 77.51%}
16:23:58: INFO: Overall to target 30.186 seconds (4.15 MBps)
16:23:58: INFO: {percent files transferred 77.77%}
16:23:58: INFO: Overall to target 30.483 seconds (4.15 MBps)
16:23:58: INFO: {percent files transferred 77.81%}
16:23:58: INFO: TARGET SAID: 'Finished sector address 291072'
16:23:58: INFO:
16:23:58: INFO: =======================================================
16:23:58: INFO: ==================== {SUCCESS} ========================
16:23:58: INFO: =======================================================
16:23:58: INFO: {percent files transferred 77.81%}
16:23:58: INFO: In handleProgram('system_6033360.bin')
16:23:58: INFO: Looking for file 'system_6033360.bin'
16:23:58: INFO: =======================================================
16:23:58: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6033360.bin'}
16:23:58: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:23:58: INFO: =======================================================
16:23:58: INFO: TARGET SAID: 'start 32000, num 259072'
16:24:00: INFO: Overall to target 2.013 seconds (4.09 MBps)
16:24:00: INFO: {percent files transferred 78.07%}
16:24:02: INFO: Overall to target 4.025 seconds (4.12 MBps)
16:24:02: INFO: {percent files transferred 78.33%}
16:24:04: INFO: Overall to target 6.038 seconds (4.14 MBps)
16:24:04: INFO: {percent files transferred 78.60%}
16:24:06: INFO: Overall to target 8.050 seconds (4.15 MBps)
16:24:06: INFO: {percent files transferred 78.86%}
16:24:08: INFO: Overall to target 10.062 seconds (4.14 MBps)
16:24:08: INFO: {percent files transferred 79.12%}
16:24:10: INFO: Overall to target 12.075 seconds (4.14 MBps)
16:24:10: INFO: {percent files transferred 79.38%}
16:24:12: INFO: Overall to target 14.087 seconds (4.15 MBps)
16:24:12: INFO: {percent files transferred 79.65%}
16:24:14: INFO: Overall to target 16.100 seconds (4.15 MBps)
16:24:14: INFO: {percent files transferred 79.91%}
16:24:16: INFO: Overall to target 18.112 seconds (4.15 MBps)
16:24:16: INFO: {percent files transferred 80.17%}
16:24:18: INFO: Overall to target 20.124 seconds (4.15 MBps)
16:24:18: INFO: {percent files transferred 80.43%}
16:24:20: INFO: Overall to target 22.137 seconds (4.15 MBps)
16:24:20: INFO: {percent files transferred 80.70%}
16:24:23: INFO: Overall to target 24.149 seconds (4.15 MBps)
16:24:23: INFO: {percent files transferred 80.96%}
16:24:25: INFO: Overall to target 26.162 seconds (4.15 MBps)
16:24:25: INFO: {percent files transferred 81.22%}
16:24:27: INFO: Overall to target 28.174 seconds (4.15 MBps)
16:24:27: INFO: {percent files transferred 81.48%}
16:24:29: INFO: Overall to target 30.187 seconds (4.15 MBps)
16:24:29: INFO: {percent files transferred 81.74%}
16:24:29: INFO: Overall to target 30.452 seconds (4.15 MBps)
16:24:29: INFO: {percent files transferred 81.78%}
16:24:29: INFO: TARGET SAID: 'Finished sector address 291072'
16:24:29: INFO:
16:24:29: INFO: =======================================================
16:24:29: INFO: ==================== {SUCCESS} ========================
16:24:29: INFO: =======================================================
16:24:29: INFO: {percent files transferred 81.78%}
16:24:29: INFO: In handleProgram('system_6295504.bin')
16:24:29: INFO: Looking for file 'system_6295504.bin'
16:24:29: INFO: =======================================================
16:24:29: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6295504.bin'}
16:24:29: INFO: {<program> (126.50 MB) 259072 sectors needed at location 0 on LUN 0}
16:24:29: INFO: =======================================================
16:24:29: INFO: TARGET SAID: 'start 32000, num 259072'
16:24:31: INFO: Overall to target 2.012 seconds (4.09 MBps)
16:24:31: INFO: {percent files transferred 82.04%}
16:24:33: INFO: Overall to target 4.024 seconds (4.13 MBps)
16:24:33: INFO: {percent files transferred 82.30%}
16:24:35: INFO: Overall to target 6.037 seconds (4.14 MBps)
16:24:35: INFO: {percent files transferred 82.56%}
16:24:37: INFO: Overall to target 8.049 seconds (4.14 MBps)
16:24:37: INFO: {percent files transferred 82.83%}
16:24:39: INFO: Overall to target 10.062 seconds (4.14 MBps)
16:24:39: INFO: {percent files transferred 83.09%}
16:24:41: INFO: Overall to target 12.074 seconds (4.14 MBps)
16:24:41: INFO: {percent files transferred 83.35%}
16:24:43: INFO: Overall to target 14.086 seconds (4.15 MBps)
16:24:43: INFO: {percent files transferred 83.61%}
16:24:45: INFO: Overall to target 16.099 seconds (4.15 MBps)
16:24:45: INFO: {percent files transferred 83.87%}
16:24:47: INFO: Overall to target 18.111 seconds (4.15 MBps)
16:24:47: INFO: {percent files transferred 84.14%}
16:24:49: INFO: Overall to target 20.124 seconds (4.15 MBps)
16:24:49: INFO: {percent files transferred 84.40%}
16:24:51: INFO: Overall to target 22.136 seconds (4.15 MBps)
16:24:51: INFO: {percent files transferred 84.66%}
16:24:53: INFO: Overall to target 24.148 seconds (4.15 MBps)
16:24:53: INFO: {percent files transferred 84.92%}
16:24:55: INFO: Overall to target 26.161 seconds (4.15 MBps)
16:24:55: INFO: {percent files transferred 85.19%}
16:24:57: INFO: Overall to target 28.173 seconds (4.15 MBps)
16:24:57: INFO: {percent files transferred 85.45%}
16:24:59: INFO: Overall to target 30.186 seconds (4.15 MBps)
16:24:59: INFO: {percent files transferred 85.71%}
16:24:59: INFO: Overall to target 30.451 seconds (4.15 MBps)
16:24:59: INFO: {percent files transferred 85.75%}
16:25:00: INFO: TARGET SAID: 'Finished sector address 291072'
16:25:00: INFO:
16:25:00: INFO: =======================================================
16:25:00: INFO: ==================== {SUCCESS} ========================
16:25:00: INFO: =======================================================
16:25:00: INFO: {percent files transferred 85.75%}
16:25:00: INFO: In handleProgram('system_6557648.bin')
16:25:00: INFO: Looking for file 'system_6557648.bin'
16:25:00: INFO: =======================================================
16:25:00: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6557648.bin'}
16:25:00: INFO: {<program> (126.00 MB) 258048 sectors needed at location 0 on LUN 0}
16:25:00: INFO: =======================================================
16:25:00: INFO: TARGET SAID: 'start 32000, num 258048'
16:25:02: INFO: FILE ACCESS SLOW!! 7.89 MB in 0.154 seconds ( 51.24 MBps) --- Overall to target 2.012 seconds (3.92 MBps)
16:25:02: INFO: {percent files transferred 85.99%}
16:25:04: INFO: FILE ACCESS SLOW!! 16.27 MB in 0.247 seconds ( 65.88 MBps) --- Overall to target 4.025 seconds (4.04 MBps)
16:25:04: INFO: {percent files transferred 86.26%}
16:25:06: INFO: FILE ACCESS SLOW!! 21.67 MB in 1.044 seconds ( 20.76 MBps) --- Overall to target 6.037 seconds (3.59 MBps)
16:25:06: INFO: {percent files transferred 86.43%}
16:25:08: INFO: FILE ACCESS SLOW!! 30.09 MB in 1.105 seconds ( 27.23 MBps) --- Overall to target 8.049 seconds (3.74 MBps)
16:25:08: INFO: {percent files transferred 86.69%}
16:25:10: INFO: FILE ACCESS SLOW!! 38.40 MB in 1.105 seconds ( 34.75 MBps) --- Overall to target 10.062 seconds (3.82 MBps)
16:25:10: INFO: {percent files transferred 86.95%}
16:25:12: INFO: FILE ACCESS SLOW!! 46.73 MB in 1.105 seconds ( 42.29 MBps) --- Overall to target 12.074 seconds (3.87 MBps)
16:25:12: INFO: {percent files transferred 87.21%}
16:25:14: INFO: FILE ACCESS SLOW!! 55.09 MB in 1.121 seconds ( 49.14 MBps) --- Overall to target 14.087 seconds (3.91 MBps)
16:25:14: INFO: {percent files transferred 87.47%}
16:25:16: INFO: FILE ACCESS SLOW!! 63.48 MB in 1.153 seconds ( 55.05 MBps) --- Overall to target 16.099 seconds (3.94 MBps)
16:25:16: INFO: {percent files transferred 87.74%}
16:25:18: INFO: FILE ACCESS SLOW!! 71.87 MB in 1.201 seconds ( 59.84 MBps) --- Overall to target 18.111 seconds (3.97 MBps)
16:25:18: INFO: {percent files transferred 88.00%}
16:25:20: INFO: FILE ACCESS SLOW!! 80.22 MB in 1.309 seconds ( 61.28 MBps) --- Overall to target 20.124 seconds (3.99 MBps)
16:25:20: INFO: {percent files transferred 88.26%}
16:25:22: INFO: FILE ACCESS SLOW!! 88.59 MB in 1.340 seconds ( 66.11 MBps) --- Overall to target 22.136 seconds (4.00 MBps)
16:25:22: INFO: {percent files transferred 88.52%}
16:25:24: INFO: FILE ACCESS SLOW!! 96.95 MB in 1.340 seconds ( 72.35 MBps) --- Overall to target 24.149 seconds (4.01 MBps)
16:25:24: INFO: {percent files transferred 88.79%}
16:25:26: INFO: FILE ACCESS SLOW!! 105.27 MB in 1.386 seconds ( 75.95 MBps) --- Overall to target 26.161 seconds (4.02 MBps)
16:25:26: INFO: {percent files transferred 89.05%}
16:25:28: INFO: FILE ACCESS SLOW!! 113.56 MB in 1.417 seconds ( 80.14 MBps) --- Overall to target 28.174 seconds (4.03 MBps)
16:25:28: INFO: {percent files transferred 89.31%}
16:25:30: INFO: FILE ACCESS SLOW!! 121.95 MB in 1.417 seconds ( 86.06 MBps) --- Overall to target 30.186 seconds (4.04 MBps)
16:25:30: INFO: {percent files transferred 89.57%}
16:25:31: INFO: Overall to target 31.153 seconds (4.04 MBps)
16:25:31: INFO: {percent files transferred 89.70%}
16:25:31: INFO: TARGET SAID: 'Finished sector address 290048'
16:25:31: INFO:
16:25:31: INFO: =======================================================
16:25:31: INFO: ==================== {SUCCESS} ========================
16:25:31: INFO: =======================================================
16:25:31: INFO: {percent files transferred 89.70%}
16:25:31: INFO: In handleProgram('system_6815744.bin')
16:25:31: INFO: Looking for file 'system_6815744.bin'
16:25:31: INFO: =======================================================
16:25:31: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6815744.bin'}
16:25:31: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:25:31: INFO: =======================================================
16:25:31: INFO: TARGET SAID: 'start 32000, num 1024'
16:25:31: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:25:31: INFO: {percent files transferred 89.71%}
16:25:31: INFO: TARGET SAID: 'Finished sector address 33024'
16:25:31: INFO:
16:25:31: INFO: =======================================================
16:25:31: INFO: ==================== {SUCCESS} ========================
16:25:31: INFO: =======================================================
16:25:31: INFO: {percent files transferred 89.71%}
16:25:31: INFO: In handleProgram('system_6819792.bin')
16:25:31: INFO: Looking for file 'system_6819792.bin'
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
16:25:31: WARNING: User requested to ONLY program num_partition_sectors 1024 of 'system_6819792.bin' (512.00 KB).
To load this file completely would require 19456 sectors (9.50 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
16:25:31: INFO: =======================================================
16:25:31: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6819792.bin'}
16:25:31: INFO: {<program> (9.50 MB) 1024 sectors needed at location 0 on LUN 0}
16:25:31: INFO: =======================================================
16:25:31: INFO: TARGET SAID: 'start 32000, num 1024'
16:25:32: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:25:32: INFO: {percent files transferred 89.73%}
16:25:32: INFO: TARGET SAID: 'Finished sector address 33024'
16:25:32: INFO:
16:25:32: INFO: =======================================================
16:25:32: INFO: ==================== {SUCCESS} ========================
16:25:32: INFO: =======================================================
16:25:32: INFO: {percent files transferred 89.73%}
16:25:32: INFO: In handleProgram('system_7077888.bin')
16:25:32: INFO: Looking for file 'system_7077888.bin'
16:25:32: INFO: =======================================================
16:25:32: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7077888.bin'}
16:25:32: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:25:32: INFO: =======================================================
16:25:32: INFO: TARGET SAID: 'start 32000, num 1024'
16:25:32: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:25:32: INFO: {percent files transferred 89.74%}
16:25:32: INFO: TARGET SAID: 'Finished sector address 33024'
16:25:32: INFO:
16:25:32: INFO: =======================================================
16:25:32: INFO: ==================== {SUCCESS} ========================
16:25:32: INFO: =======================================================
16:25:32: INFO: {percent files transferred 89.74%}
16:25:32: INFO: In handleProgram('system_7340032.bin')
16:25:32: INFO: Looking for file 'system_7340032.bin'
16:25:32: INFO: =======================================================
16:25:32: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7340032.bin'}
16:25:32: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:25:32: INFO: =======================================================
16:25:32: INFO: TARGET SAID: 'start 32000, num 1024'
16:25:32: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:25:32: INFO: {percent files transferred 89.76%}
16:25:32: INFO: TARGET SAID: 'Finished sector address 33024'
16:25:32: INFO:
16:25:32: INFO: =======================================================
16:25:32: INFO: ==================== {SUCCESS} ========================
16:25:32: INFO: =======================================================

16:25:32: INFO: {percent files transferred 89.76%}
16:25:32: INFO: In handleProgram('system_7602176.bin')
16:25:32: INFO: Looking for file 'system_7602176.bin'
16:25:32: INFO: =======================================================
16:25:32: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7602176.bin'}
16:25:32: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:25:32: INFO: =======================================================
16:25:32: INFO: TARGET SAID: 'start 32000, num 1024'
16:25:33: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:25:33: INFO: {percent files transferred 89.78%}
16:25:33: INFO: TARGET SAID: 'Finished sector address 33024'
16:25:33: INFO:
16:25:33: INFO: =======================================================
16:25:33: INFO: ==================== {SUCCESS} ========================
16:25:33: INFO: =======================================================
16:25:33: INFO: {percent files transferred 89.78%}
16:25:33: INFO: In handleProgram('system_7604360.bin')
16:25:33: INFO: Looking for file 'system_7604360.bin'
16:25:33: INFO: =======================================================
16:25:33: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7604360.bin'}
16:25:33: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:25:33: INFO: =======================================================
16:25:33: INFO: TARGET SAID: 'start 32000, num 1024'
16:25:33: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.124 seconds (4.03 MBps)
16:25:33: INFO: {percent files transferred 89.79%}
16:25:33: INFO: TARGET SAID: 'Finished sector address 33024'
16:25:33: INFO:
16:25:33: INFO: =======================================================
16:25:33: INFO: ==================== {SUCCESS} ========================
16:25:33: INFO: =======================================================
16:25:33: INFO: {percent files transferred 89.79%}
16:25:33: INFO: In handleProgram('system_7608408.bin')
16:25:33: INFO: Looking for file 'system_7608408.bin'
16:25:33: INFO: =======================================================
16:25:33: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7608408.bin'}
16:25:33: INFO: {<program> (125.00 MB) 256000 sectors needed at location 0 on LUN 0}
16:25:33: INFO: =======================================================
16:25:33: INFO: TARGET SAID: 'start 32000, num 256000'
16:25:35: INFO: FILE ACCESS SLOW!! 8.22 MB in 0.108 seconds ( 76.10 MBps) --- Overall to target 2.013 seconds (4.08 MBps)
16:25:35: INFO: {percent files transferred 90.05%}
16:25:37: INFO: FILE ACCESS SLOW!! 16.64 MB in 0.185 seconds ( 89.95 MBps) --- Overall to target 4.025 seconds (4.13 MBps)
16:25:37: INFO: {percent files transferred 90.31%}
16:25:39: INFO: Overall to target 6.037 seconds (4.14 MBps)
16:25:39: INFO: {percent files transferred 90.57%}
16:25:41: INFO: Overall to target 8.050 seconds (4.14 MBps)
16:25:41: INFO: {percent files transferred 90.84%}
16:25:43: INFO: Overall to target 10.062 seconds (4.14 MBps)
16:25:43: INFO: {percent files transferred 91.10%}
16:25:45: INFO: Overall to target 12.075 seconds (4.14 MBps)
16:25:45: INFO: {percent files transferred 91.36%}
16:25:47: INFO: Overall to target 14.087 seconds (4.15 MBps)
16:25:47: INFO: {percent files transferred 91.62%}
16:25:49: INFO: Overall to target 16.099 seconds (4.14 MBps)
16:25:49: INFO: {percent files transferred 91.88%}
16:25:51: INFO: Overall to target 18.112 seconds (4.15 MBps)
16:25:51: INFO: {percent files transferred 92.15%}
16:25:53: INFO: Overall to target 20.124 seconds (4.15 MBps)
16:25:53: INFO: {percent files transferred 92.41%}
16:25:55: INFO: Overall to target 22.137 seconds (4.15 MBps)
16:25:55: INFO: {percent files transferred 92.67%}
16:25:57: INFO: Overall to target 24.149 seconds (4.15 MBps)
16:25:57: INFO: {percent files transferred 92.93%}
16:25:59: INFO: Overall to target 26.162 seconds (4.15 MBps)
16:25:59: INFO: {percent files transferred 93.19%}
16:26:01: INFO: Overall to target 28.174 seconds (4.15 MBps)
16:26:01: INFO: {percent files transferred 93.45%}
16:26:03: INFO: Overall to target 30.124 seconds (4.15 MBps)
16:26:03: INFO: {percent files transferred 93.71%}
16:26:03: INFO: TARGET SAID: 'Finished sector address 288000'
16:26:03: INFO:
16:26:03: INFO: =======================================================
16:26:03: INFO: ==================== {SUCCESS} ========================
16:26:03: INFO: =======================================================
16:26:03: INFO: {percent files transferred 93.71%}
16:26:03: INFO: In handleProgram('system_8126464.bin')
16:26:03: INFO: Looking for file 'system_8126464.bin'
16:26:03: INFO: =======================================================
16:26:03: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8126464.bin'}
16:26:03: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:03: INFO: =======================================================
16:26:03: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:04: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:26:04: INFO: {percent files transferred 93.73%}
16:26:04: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:04: INFO:
16:26:04: INFO: =======================================================
16:26:04: INFO: ==================== {SUCCESS} ========================
16:26:04: INFO: =======================================================
16:26:04: INFO: {percent files transferred 93.73%}
16:26:04: INFO: In handleProgram('system_8128648.bin')
16:26:04: INFO: Looking for file 'system_8128648.bin'
16:26:04: INFO: =======================================================
16:26:04: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8128648.bin'}
16:26:04: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:04: INFO: =======================================================
16:26:04: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:04: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.124 seconds (4.03 MBps)
16:26:04: INFO: {percent files transferred 93.74%}
16:26:04: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:04: INFO:
16:26:04: INFO: =======================================================
16:26:04: INFO: ==================== {SUCCESS} ========================
16:26:04: INFO: =======================================================
16:26:04: INFO: {percent files transferred 93.74%}
16:26:04: INFO: In handleProgram('system_8132696.bin')
16:26:04: INFO: Looking for file 'system_8132696.bin'
16:26:04: INFO: =======================================================
16:26:04: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8132696.bin'}
16:26:04: INFO: {<program> (125.00 MB) 256000 sectors needed at location 0 on LUN 0}
16:26:04: INFO: =======================================================
16:26:04: INFO: TARGET SAID: 'start 32000, num 256000'
16:26:06: INFO: FILE ACCESS SLOW!! 8.02 MB in 0.158 seconds ( 50.78 MBps) --- Overall to target 2.013 seconds (3.99 MBps)
16:26:06: INFO: {percent files transferred 93.99%}
16:26:08: INFO: FILE ACCESS SLOW!! 16.43 MB in 0.220 seconds ( 74.68 MBps) --- Overall to target 4.025 seconds (4.08 MBps)
16:26:08: INFO: {percent files transferred 94.26%}
16:26:10: INFO: Overall to target 6.037 seconds (4.11 MBps)
16:26:10: INFO: {percent files transferred 94.52%}
16:26:12: INFO: Overall to target 8.050 seconds (4.12 MBps)
16:26:12: INFO: {percent files transferred 94.78%}
16:26:14: INFO: Overall to target 10.062 seconds (4.12 MBps)
16:26:14: INFO: {percent files transferred 95.04%}
16:26:16: INFO: Overall to target 12.075 seconds (4.13 MBps)
16:26:16: INFO: {percent files transferred 95.31%}
16:26:18: INFO: Overall to target 14.087 seconds (4.13 MBps)
16:26:18: INFO: {percent files transferred 95.57%}
16:26:20: INFO: Overall to target 16.099 seconds (4.12 MBps)
16:26:20: INFO: {percent files transferred 95.82%}
16:26:22: INFO: Overall to target 18.112 seconds (4.13 MBps)
16:26:22: INFO: {percent files transferred 96.09%}
16:26:24: INFO: Overall to target 20.124 seconds (4.13 MBps)
16:26:24: INFO: {percent files transferred 96.35%}
16:26:26: INFO: Overall to target 22.137 seconds (4.12 MBps)
16:26:26: INFO: {percent files transferred 96.60%}
16:26:28: INFO: Overall to target 24.149 seconds (4.13 MBps)
16:26:28: INFO: {percent files transferred 96.87%}
16:26:30: INFO: Overall to target 26.162 seconds (4.13 MBps)
16:26:30: INFO: {percent files transferred 97.13%}
16:26:32: INFO: Overall to target 28.174 seconds (4.13 MBps)
16:26:32: INFO: {percent files transferred 97.39%}
16:26:34: INFO: Overall to target 30.186 seconds (4.13 MBps)
16:26:34: INFO: {percent files transferred 97.65%}
16:26:34: INFO: Overall to target 30.249 seconds (4.13 MBps)
16:26:34: INFO: {percent files transferred 97.66%}
16:26:34: INFO: TARGET SAID: 'Finished sector address 288000'
16:26:34: INFO:
16:26:34: INFO: =======================================================
16:26:34: INFO: ==================== {SUCCESS} ========================
16:26:34: INFO: =======================================================
16:26:34: INFO: {percent files transferred 97.66%}
16:26:34: INFO: In handleProgram('system_8650752.bin')
16:26:34: INFO: Looking for file 'system_8650752.bin'
16:26:34: INFO: =======================================================
16:26:34: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8650752.bin'}
16:26:34: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:34: INFO: =======================================================
16:26:35: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:35: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.156 seconds (3.21 MBps)
16:26:35: INFO: {percent files transferred 97.68%}
16:26:35: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:35: INFO:
16:26:35: INFO: =======================================================
16:26:35: INFO: ==================== {SUCCESS} ========================
16:26:35: INFO: =======================================================
16:26:35: INFO: {percent files transferred 97.68%}
16:26:35: INFO: In handleProgram('system_8912896.bin')
16:26:35: INFO: Looking for file 'system_8912896.bin'
16:26:35: INFO: =======================================================
16:26:35: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8912896.bin'}
16:26:35: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:35: INFO: =======================================================
16:26:35: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:35: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:26:35: INFO: {percent files transferred 97.69%}
16:26:35: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:35: INFO:
16:26:35: INFO: =======================================================
16:26:35: INFO: ==================== {SUCCESS} ========================
16:26:35: INFO: =======================================================
16:26:35: INFO: {percent files transferred 97.69%}
16:26:35: INFO: In handleProgram('system_9175040.bin')
16:26:35: INFO: Looking for file 'system_9175040.bin'
16:26:35: INFO: =======================================================
16:26:35: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9175040.bin'}
16:26:35: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:35: INFO: =======================================================
16:26:35: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:35: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.140 seconds (3.57 MBps)
16:26:35: INFO: {percent files transferred 97.71%}
16:26:35: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:35: INFO:
16:26:35: INFO: =======================================================
16:26:35: INFO: ==================== {SUCCESS} ========================
16:26:35: INFO: =======================================================
16:26:35: INFO: {percent files transferred 97.71%}
16:26:35: INFO: In handleProgram('system_9437184.bin')
16:26:35: INFO: Looking for file 'system_9437184.bin'
16:26:35: INFO: =======================================================
16:26:35: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9437184.bin'}
16:26:35: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:35: INFO: =======================================================
16:26:36: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:36: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:26:36: INFO: {percent files transferred 97.72%}
16:26:36: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:36: INFO:
16:26:36: INFO: =======================================================
16:26:36: INFO: ==================== {SUCCESS} ========================
16:26:36: INFO: =======================================================
16:26:36: INFO: {percent files transferred 97.72%}
16:26:36: INFO: In handleProgram('system_9699328.bin')
16:26:36: INFO: Looking for file 'system_9699328.bin'
16:26:36: INFO: =======================================================
16:26:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9699328.bin'}
16:26:36: INFO: {<program> (512.00 KB) 1024 sectors needed at location 0 on LUN 0}
16:26:36: INFO: =======================================================
16:26:36: INFO: TARGET SAID: 'start 32000, num 1024'
16:26:36: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.141 seconds (3.55 MBps)
16:26:36: INFO: {percent files transferred 97.74%}
16:26:36: INFO: TARGET SAID: 'Finished sector address 33024'
16:26:36: INFO:
16:26:36: INFO: =======================================================
16:26:36: INFO: ==================== {SUCCESS} ========================
16:26:36: INFO: =======================================================
16:26:36: INFO: {percent files transferred 97.74%}
16:26:36: INFO: In handleProgram('system_9703376.bin')
16:26:36: INFO: Looking for file 'system_9703376.bin'
16:26:36: INFO: =======================================================
16:26:36: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9703376.bin'}
16:26:36: INFO: {<program> (58.50 MB) 119808 sectors needed at location 0 on LUN 0}
16:26:36: INFO: =======================================================
16:26:36: INFO: TARGET SAID: 'start 32000, num 119808'
16:26:38: INFO: Overall to target 2.012 seconds (4.08 MBps)
16:26:38: INFO: {percent files transferred 98.00%}
16:26:40: INFO: Overall to target 4.024 seconds (4.12 MBps)
16:26:40: INFO: {percent files transferred 98.26%}
16:26:42: INFO: Overall to target 6.037 seconds (4.13 MBps)
16:26:42: INFO: {percent files transferred 98.52%}
16:26:44: INFO: Overall to target 8.049 seconds (4.14 MBps)
16:26:44: INFO: {percent files transferred 98.78%}
16:26:46: INFO: FILE ACCESS SLOW!! 40.32 MB in 0.485 seconds ( 83.13 MBps) --- Overall to target 10.140 seconds (3.98 MBps)
16:26:46: INFO: {percent files transferred 99.00%}
16:26:48: INFO: FILE ACCESS SLOW!! 48.58 MB in 0.530 seconds ( 91.66 MBps) --- Overall to target 12.152 seconds (4.00 MBps)
16:26:48: INFO: {percent files transferred 99.26%}
16:26:50: INFO: FILE ACCESS SLOW!! 56.96 MB in 0.638 seconds ( 89.28 MBps) --- Overall to target 14.164 seconds (4.02 MBps)
16:26:50: INFO: {percent files transferred 99.53%}
16:26:51: INFO: Overall to target 14.539 seconds (4.02 MBps)
16:26:51: INFO: {percent files transferred 99.57%}
16:26:51: INFO: TARGET SAID: 'Finished sector address 151808'
16:26:51: INFO:
16:26:51: INFO: =======================================================
16:26:51: INFO: ==================== {SUCCESS} ========================
16:26:51: INFO: =======================================================
16:26:51: INFO: {percent files transferred 99.57%}
16:26:51: INFO: In handleProgram('BackupGPT_61070336.bin')
16:26:51: INFO: Looking for file 'BackupGPT_61070336.bin'
16:26:51: INFO: =======================================================
16:26:51: INFO: {<program> FILE: 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\BackupGPT_61070336.bin'}
16:26:51: INFO: {<program> (512.00 KB) 1024 sectors needed at location 7633920 on LUN 0}
16:26:51: INFO: =======================================================
16:26:51: INFO: TARGET SAID: 'start 7633920, num 1024'
16:26:51: INFO: FILE ACCESS SLOW!! 512.00 KB in 0.015 seconds ( 33.33 MBps) --- Overall to target 0.171 seconds (2.92 MBps)
16:26:51: INFO: {percent files transferred 99.59%}
16:26:51: INFO: TARGET SAID: 'Finished sector address 7634944'
16:26:51: INFO:
16:26:51: INFO: =======================================================
16:26:51: INFO: ==================== {SUCCESS} ========================
16:26:51: INFO: =======================================================
16:26:51: INFO: {percent files transferred 99.59%}
16:26:51: INFO: ==============================================================
16:26:51: INFO: Files used and their paths
16:26:51: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:26:51: INFO: 2 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rawprogram0.xml'
16:26:51: INFO: 3 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\PrimaryGPT_0.bin'
16:26:51: INFO: 4 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\modem_32768.bin'
16:26:51: INFO: 5 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\pmic_229376.bin'
16:26:51: INFO: 6 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\tz_232448.bin'
16:26:51: INFO: 7 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\sdi_234496.bin'
16:26:51: INFO: 8 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\hyp_235520.bin'
16:26:51: INFO: 9 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rpm_236544.bin'
16:26:51: INFO: 10 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\aboot_237568.bin'
16:26:51: INFO: 11 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\sbl1bak_241664.bin'
16:26:51: INFO: 12 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\pmicbak_243712.bin'
16:26:51: INFO: 13 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\tzbak_244736.bin'
16:26:51: INFO: 14 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\hypbak_246784.bin'
16:26:51: INFO: 15 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\rpmbak_247808.bin'
16:26:51: INFO: 16 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\abootbak_248832.bin'
16:26:51: INFO: 17 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\persist_294912.bin'
16:26:51: INFO: 18 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\sec_376832.bin'
16:26:51: INFO: 19 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\laf_393216.bin'
16:26:51: INFO: 20 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\boot_491520.bin'
16:26:51: INFO: 21 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\recovery_573440.bin'
16:26:51: INFO: 22 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\raw_resources_770048.bin'
16:26:51: INFO: 23 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\raw_resourcesbak_778240.bin'
16:26:51: INFO: 24 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\factory_917504.bin'
16:26:51: INFO: 25 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1048576.bin'
16:26:51: INFO: 26 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1312904.bin'
16:26:51: INFO: 27 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1576912.bin'
16:26:51: INFO: 28 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1837192.bin'
16:26:51: INFO: 29 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_1841240.bin'
16:26:51: INFO: 30 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2101200.bin'
16:26:51: INFO: 31 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2361480.bin'
16:26:51: INFO: 32 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2365528.bin'
16:26:51: INFO: 33 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2625488.bin'
16:26:51: INFO: 34 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2885768.bin'
16:26:51: INFO: 35 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_2889816.bin'
16:26:51: INFO: 36 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3149776.bin'
16:26:51: INFO: 37 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3410056.bin'
16:26:51: INFO: 38 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3414104.bin'
16:26:51: INFO: 39 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3674064.bin'
16:26:51: INFO: 40 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_3936208.bin'
16:26:51: INFO: 41 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_4198352.bin'
16:26:51: INFO: 42 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_4722640.bin'
16:26:51: INFO: 43 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_4984784.bin'
16:26:51: INFO: 44 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_5246928.bin'
16:26:51: INFO: 45 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_5509072.bin'
16:26:51: INFO: 46 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_5771216.bin'
16:26:51: INFO: 47 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6033360.bin'
16:26:51: INFO: 48 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6295504.bin'
16:26:52: INFO: 49 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6557648.bin'
16:26:52: INFO: 50 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6815744.bin'
16:26:52: INFO: 51 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_6819792.bin'
16:26:52: INFO: 52 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7077888.bin'
16:26:52: INFO: 53 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7340032.bin'
16:26:52: INFO: 54 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7602176.bin'
16:26:52: INFO: 55 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7604360.bin'
16:26:52: INFO: 56 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_7608408.bin'
16:26:52: INFO: 57 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8126464.bin'
16:26:52: INFO: 58 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8128648.bin'
16:26:52: INFO: 59 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8132696.bin'
16:26:52: INFO: 60 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8650752.bin'
16:26:52: INFO: 61 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_8912896.bin'
16:26:52: INFO: 62 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9175040.bin'
16:26:52: INFO: 63 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9437184.bin'
16:26:52: INFO: 64 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9699328.bin'
16:26:52: INFO: 65 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\system_9703376.bin'
16:26:52: INFO: 66 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\BackupGPT_61070336.bin'
(_)

__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
16:26:52: INFO: ==============================================================
16:26:52: INFO: NOTE: There were WARNINGS!! Repeated here, but please see log for more detail
User requested to ONLY program num_partition_sectors 250672 of 'system_3149776.bin' (122.40 MB).
To load this file completely would require 259072 sectors (126.50 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
User requested to ONLY program num_partition_sectors 1024 of 'system_6819792.bin' (512.00 KB).
To load this file completely would require 19456 sectors (9.50 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
NOTE: There were WARNINGS!! Repeated above, but please see log for more detail
16:26:52: INFO: ==============================================================
16:26:52: INFO: _ (done)
16:26:52: INFO: | |
16:26:52: INFO: __| | ___ _ __ ___
16:26:52: INFO: / _` |/ _ \| '_ \ / _ \
16:26:52: INFO: | (_| | (_) | | | | __/
16:26:52: INFO: \__,_|\___/|_| |_|\___|
16:26:52: INFO: {All Finished Successfully}
16:26:52: INFO: Overall to target 794.295 seconds (4.00 MBps)
16:26:52: INFO: {percent files transferred 99.59%}
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:26:52: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=patch0.xml --search_path=C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
16:26:52: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:26:52: INFO: Showing network mappings to allow debugging
16:26:53: INFO:
16:26:53: INFO: Trying to store 'patch0.xml' in string table
16:26:53: INFO: Looking for file 'patch0.xml'
16:26:53: INFO: User wants to talk to port '\\.\COM4'
16:26:53: INFO: Took 0.00000000 seconds to open port
16:26:53: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:26:53: INFO: If you don't want this, use --dontsorttags
16:26:53: INFO: Sending <configure>
16:26:53: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:26:53: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:26:53: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:26:53: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:26:53: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:26:53: INFO: TARGET SAID: 'Patched sector 15 with 03A3DFDE'
16:26:53: INFO: TARGET SAID: 'Patched sector 61071340 with 03A3DFDE'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFDE'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDE'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFFF'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFFF'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDF'
16:26:54: INFO: TARGET SAID: 'crc start sector 2, over bytes 7168'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 50062988'
16:26:54: INFO: TARGET SAID: 'crc start sector 61071327, over bytes 7168'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 69DA7787'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 00000000'
16:26:54: INFO: TARGET SAID: 'crc start sector 1, over bytes 92'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with EE94377E'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 00000000'
16:26:55: INFO: TARGET SAID: 'crc start sector 61071359, over bytes 92'
16:26:55: INFO: TARGET SAID: 'Patched sector 61071359 with 1E727681'
16:26:55: INFO: ==============================================================
16:26:55: INFO: Files used and their paths
16:26:55: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:26:55: INFO: 2 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\patch0.xml'
16:26:55: INFO: _ (done)
16:26:55: INFO: | |
16:26:55: INFO: __| | ___ _ __ ___
16:26:55: INFO: / _` |/ _ \| '_ \ / _ \
16:26:55: INFO: | (_| | (_) | | | | __/
16:26:55: INFO: \__,_|\___/|_| |_|\___|
16:26:55: INFO: {All Finished Successfully}
16:26:55: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 1.388 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:26:55: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC --setactivepartition=0
************************************************
16:26:55: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:26:55: INFO: Showing network mappings to allow debugging
16:26:55: INFO: User wants to talk to port '\\.\COM4'
16:26:55: INFO: Took 0.00000000 seconds to open port
16:26:55: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:26:55: INFO: If you don't want this, use --dontsorttags
16:26:55: INFO: Sending <configure>
16:26:55: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:26:55: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:26:55: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:26:55: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:26:55: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:26:55: INFO: Sending <setbootablestoragedrive>
16:26:55: INFO: ==============================================================
16:26:55: INFO: Files used and their paths
16:26:55: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:26:55: INFO: _ (done)
16:26:55: INFO: | |
16:26:55: INFO: __| | ___ _ __ ___
16:26:55: INFO: / _` |/ _ \| '_ \ / _ \
16:26:55: INFO: | (_| | (_) | | | | __/
16:26:55: INFO: \__,_|\___/|_| |_|\___|
16:26:55: INFO: {All Finished Successfully}
16:26:55: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 0.203 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Succeed
Finish Download
f500l all kdz exract file flashing

aaya888 said:
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
16:26:52: INFO: ==============================================================
16:26:52: INFO: NOTE: There were WARNINGS!! Repeated here, but please see log for more detail
User requested to ONLY program num_partition_sectors 250672 of 'system_3149776.bin' (122.40 MB).
To load this file completely would require 259072 sectors (126.50 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
User requested to ONLY program num_partition_sectors 1024 of 'system_6819792.bin' (512.00 KB).
To load this file completely would require 19456 sectors (9.50 MB) and SectorSizeInBytes=512.
This is usually a MISTAKE but there is a use case where you want to write only part of the image!
NOTE: There were WARNINGS!! Repeated above, but please see log for more detail
16:26:52: INFO: ==============================================================
16:26:52: INFO: _ (done)
16:26:52: INFO: | |
16:26:52: INFO: __| | ___ _ __ ___
16:26:52: INFO: / _` |/ _ \| '_ \ / _ \
16:26:52: INFO: | (_| | (_) | | | | __/
16:26:52: INFO: \__,_|\___/|_| |_|\___|
16:26:52: INFO: {All Finished Successfully}
16:26:52: INFO: Overall to target 794.295 seconds (4.00 MBps)
16:26:52: INFO: {percent files transferred 99.59%}
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:26:52: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=patch0.xml --search_path=C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
16:26:52: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:26:52: INFO: Showing network mappings to allow debugging
16:26:53: INFO:
16:26:53: INFO: Trying to store 'patch0.xml' in string table
16:26:53: INFO: Looking for file 'patch0.xml'
16:26:53: INFO: User wants to talk to port '\\.\COM4'
16:26:53: INFO: Took 0.00000000 seconds to open port
16:26:53: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:26:53: INFO: If you don't want this, use --dontsorttags
16:26:53: INFO: Sending <configure>
16:26:53: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:26:53: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:26:53: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:26:53: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:26:53: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:26:53: INFO: TARGET SAID: 'Patched sector 15 with 03A3DFDE'
16:26:53: INFO: TARGET SAID: 'Patched sector 61071340 with 03A3DFDE'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFDE'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDE'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 03A3DFFF'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFFF'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 03A3DFDF'
16:26:54: INFO: TARGET SAID: 'crc start sector 2, over bytes 7168'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 50062988'
16:26:54: INFO: TARGET SAID: 'crc start sector 61071327, over bytes 7168'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 69DA7787'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with 00000000'
16:26:54: INFO: TARGET SAID: 'crc start sector 1, over bytes 92'
16:26:54: INFO: TARGET SAID: 'Patched sector 1 with EE94377E'
16:26:54: INFO: TARGET SAID: 'Patched sector 61071359 with 00000000'
16:26:55: INFO: TARGET SAID: 'crc start sector 61071359, over bytes 92'
16:26:55: INFO: TARGET SAID: 'Patched sector 61071359 with 1E727681'
16:26:55: INFO: ==============================================================
16:26:55: INFO: Files used and their paths
16:26:55: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:26:55: INFO: 2 'C:\Users\aaya\Desktop\WindowsLGFirmwareExtract-1.2.5.0-Release\patch0.xml'
16:26:55: INFO: _ (done)
16:26:55: INFO: | |
16:26:55: INFO: __| | ___ _ __ ___
16:26:55: INFO: / _` |/ _ \| '_ \ / _ \
16:26:55: INFO: | (_| | (_) | | | | __/
16:26:55: INFO: \__,_|\___/|_| |_|\___|
16:26:55: INFO: {All Finished Successfully}
16:26:55: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 1.388 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
16:26:55: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC --setactivepartition=0
************************************************
16:26:55: INFO: Current working dir (cwd): C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\
16:26:55: INFO: Showing network mappings to allow debugging
16:26:55: INFO: User wants to talk to port '\\.\COM4'
16:26:55: INFO: Took 0.00000000 seconds to open port
16:26:55: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:26:55: INFO: If you don't want this, use --dontsorttags
16:26:55: INFO: Sending <configure>
16:26:55: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
16:26:55: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
16:26:55: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 8192
16:26:55: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 8192
16:26:55: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
16:26:55: INFO: Sending <setbootablestoragedrive>
16:26:55: INFO: ==============================================================
16:26:55: INFO: Files used and their paths
16:26:55: INFO: 1 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
16:26:55: INFO: _ (done)
16:26:55: INFO: | |
16:26:55: INFO: __| | ___ _ __ ___
16:26:55: INFO: / _` |/ _ \| '_ \ / _ \
16:26:55: INFO: | (_| | (_) | | | | __/
16:26:55: INFO: \__,_|\___/|_| |_|\___|
16:26:55: INFO: {All Finished Successfully}
16:26:55: INFO: FILE ACCESS SLOW!! 0.00 B in 0.015 seconds ( 0.00 Bps) --- Overall to target 0.203 seconds (0.00 Bps)
Writing log to 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\aaya\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Succeed
Finish Download
f500l all kdz exract file flashing
Click to expand...
Click to collapse
OMG there's a f'king HIDE function
Posting whole log like this is pain in the a$$ to scroll through this post.
And you should tell people you need paid membership on that site in 1st post.

this is annoying to the fullest

F500 unbrick files please

please help me
aaya888 said:
h818p
Validating Application Configuration
Load APP Configuration
COM:3
SAHARA:True
SAHARA:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
PATCH file path ignored: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:3
Sending NOP
FireHose Log: Binary build date: Mar 3 2015 @ 19:29:19
FireHose Log: fh.attrs.Verbose is set to 0
FireHose Log: Chip serial num: 3364918 (0x335836)
FireHose Log: Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
FireHose NOP sent successfully
Sending Configuration
Device Type:eMMC
Platform:8x26
FireHose Log: Host's hash buffer size not provided or 0; using 8192
FireHose Log: fh.attrs.MaxPayloadSizeToTargetInBytes > FIREHOSE_CHANNEL_BUFFER_SIZE
FireHose Log: Calling hotplug_poll_device('MMC')
Invalid response NAK
Set TxBuffer 0x2000, RxBuffer 0x1000
Firehose configure packet sent successfully!
ReadBackMode:No_Readback
Disable read back
Total Bytes To Program 0x29912A0
Download Image
PROGRAM: Partition 0, Sector: 229376, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\pmic.mbn
FireHose Log: start 229376, num 1024
FireHose Log: Finished sector address 230400
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Partition 0, Sector: 230400, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sbl1.mbn
FireHose Log: start 230400, num 2048
FireHose Log: Finished sector address 232448
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 232448, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\tz.mbn
FireHose Log: start 232448, num 2048
FireHose Log: Finished sector address 234496
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 234496, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sdi.mbn
FireHose Log: start 234496, num 1024
FireHose Log: Finished sector address 235520
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 235520, Length: 185 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\hyp.mbn
FireHose Log: start 235520, num 185
FireHose Log: Finished sector address 235705
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Partition 0, Sector: 236544, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rpm.mbn
FireHose Log: start 236544, num 1024
FireHose Log: Finished sector address 237568
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x461
PROGRAM: Partition 0, Sector: 237568, Length: 1121 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\emmc_appsboot.mbn
FireHose Log: start 237568, num 1121
FireHose Log: Finished sector address 238689
PROGRAM: Written Bytes 0x8c200 (64)
Program Size: 0.55 MB
PROGRAM: Partition 0, Sector: 241664, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sbl1.mbn
FireHose Log: start 241664, num 2048
FireHose Log: Finished sector address 243712
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 243712, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\pmic.mbn
FireHose Log: start 243712, num 1024
FireHose Log: Finished sector address 244736
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Partition 0, Sector: 244736, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\tz.mbn
FireHose Log: start 244736, num 2048
FireHose Log: Finished sector address 246784
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 246784, Length: 185 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\hyp.mbn
FireHose Log: start 246784, num 185
FireHose Log: Finished sector address 246969
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Partition 0, Sector: 247808, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rpm.mbn
FireHose Log: start 247808, num 1024
FireHose Log: Finished sector address 248832
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x461
PROGRAM: Partition 0, Sector: 248832, Length: 1121 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\emmc_appsboot.mbn
FireHose Log: start 248832, num 1121
FireHose Log: Finished sector address 249953
PROGRAM: Written Bytes 0x8c200 (64)
Program Size: 0.55 MB
PROGRAM: Partition 0, Sector: 252928, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sdi.mbn
FireHose Log: start 252928, num 1024
FireHose Log: Finished sector address 253952
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x18000 to file size in sector 0x12b2c
PROGRAM: Partition 0, Sector: 393216, Length: 76588 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\laf.img
FireHose Log: start 393216, num 76588
FireHose Log: Finished sector address 469804
PROGRAM: Written Bytes 0x2565800 (64)
Program Size: 37.40 MB
PROGRAM: Partition 0, Sector: 0, Length: 34 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\gpt_main0.bin
FireHose Log: start 0, num 34
FireHose Log: Finished sector address 34
PROGRAM: Written Bytes 0x4400 (64)
Program Size: 0.02 MB
PROGRAM: Partition 0, Sector: NUM_DISK_SECTORS-33., Length: 33 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\gpt_backup0.bin
FireHose Log: start 61071327, num 33
FireHose Log: Finished sector address 61071360
PROGRAM: Written Bytes 0x4200 (64)
Program Size: 0.02 MB
Total Size: 45.70 MB
Total Time: 12 Seconds
Throughput: 3.81 MB/Seconds
PATCH: Partition 0, Sector: 15, Offset 424 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 15 with 03A3DFDE
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-20., Offset 424 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071340 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 1 with 03A3DFDE
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071359 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 32 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 1 with 03A3DFFF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 24 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 61071359 with 03A3DFFF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1, Offset 72 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-33.
FireHose Log: Patched sector 61071359 with 03A3DFDF
PATCH: Partition 0, Sector: 1, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(2,7168)
FireHose Log: crc start sector 2, over bytes 7168
FireHose Log: Patched sector 1 with C75ADFEF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-33.,7168)
FireHose Log: crc start sector 61071327, over bytes 7168
FireHose Log: Patched sector 61071359 with C75ADFEF
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 1 with 00000000
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(1,92)
FireHose Log: crc start sector 1, over bytes 92
FireHose Log: Patched sector 1 with 8149E319
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 61071359 with 00000000
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-1.,92)
FireHose Log: crc start sector 61071359, over bytes 92
FireHose Log: Patched sector 61071359 with 3D66B311
Total download file size: 45.70459MB
Total download time: 12 Sec
Throughput: 3.706868MB/s
Download Succeed
Finish Download
Click to expand...
Click to collapse
Where I can find this file..my h818p is hard bricked..no charging..no anything,, please tell me what can I do.. Help me

aaya888 said:
h818p
Validating Application Configuration
Load APP Configuration
COM:3
SAHARA:True
SAHARA:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
PATCH file path ignored: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Image Search Path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
Start Download
Program Path:C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:3
Sending NOP
FireHose Log: Binary build date: Mar 3 2015 @ 19:29:19
FireHose Log: fh.attrs.Verbose is set to 0
FireHose Log: Chip serial num: 3364918 (0x335836)
FireHose Log: Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
FireHose NOP sent successfully
Sending Configuration
Device Type:eMMC
Platform:8x26
FireHose Log: Host's hash buffer size not provided or 0; using 8192
FireHose Log: fh.attrs.MaxPayloadSizeToTargetInBytes > FIREHOSE_CHANNEL_BUFFER_SIZE
FireHose Log: Calling hotplug_poll_device('MMC')
Invalid response NAK
Set TxBuffer 0x2000, RxBuffer 0x1000
Firehose configure packet sent successfully!
ReadBackMode:No_Readback
Disable read back
Total Bytes To Program 0x29912A0
Download Image
PROGRAM: Partition 0, Sector: 229376, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\pmic.mbn
FireHose Log: start 229376, num 1024
FireHose Log: Finished sector address 230400
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Partition 0, Sector: 230400, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sbl1.mbn
FireHose Log: start 230400, num 2048
FireHose Log: Finished sector address 232448
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 232448, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\tz.mbn
FireHose Log: start 232448, num 2048
FireHose Log: Finished sector address 234496
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 234496, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sdi.mbn
FireHose Log: start 234496, num 1024
FireHose Log: Finished sector address 235520
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 235520, Length: 185 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\hyp.mbn
FireHose Log: start 235520, num 185
FireHose Log: Finished sector address 235705
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Partition 0, Sector: 236544, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rpm.mbn
FireHose Log: start 236544, num 1024
FireHose Log: Finished sector address 237568
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x461
PROGRAM: Partition 0, Sector: 237568, Length: 1121 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\emmc_appsboot.mbn
FireHose Log: start 237568, num 1121
FireHose Log: Finished sector address 238689
PROGRAM: Written Bytes 0x8c200 (64)
Program Size: 0.55 MB
PROGRAM: Partition 0, Sector: 241664, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sbl1.mbn
FireHose Log: start 241664, num 2048
FireHose Log: Finished sector address 243712
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Partition 0, Sector: 243712, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\pmic.mbn
FireHose Log: start 243712, num 1024
FireHose Log: Finished sector address 244736
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Partition 0, Sector: 244736, Length: 2048 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\tz.mbn
FireHose Log: start 244736, num 2048
FireHose Log: Finished sector address 246784
PROGRAM: Written Bytes 0x100000 (64)
Program Size: 1.00 MB
PROGRAM: Replace the partition sectors number 0x400 to file size in sector 0xb9
PROGRAM: Partition 0, Sector: 246784, Length: 185 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\hyp.mbn
FireHose Log: start 246784, num 185
FireHose Log: Finished sector address 246969
PROGRAM: Written Bytes 0x17200 (64)
Program Size: 0.09 MB
PROGRAM: Partition 0, Sector: 247808, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rpm.mbn
FireHose Log: start 247808, num 1024
FireHose Log: Finished sector address 248832
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x1000 to file size in sector 0x461
PROGRAM: Partition 0, Sector: 248832, Length: 1121 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\emmc_appsboot.mbn
FireHose Log: start 248832, num 1121
FireHose Log: Finished sector address 249953
PROGRAM: Written Bytes 0x8c200 (64)
Program Size: 0.55 MB
PROGRAM: Partition 0, Sector: 252928, Length: 1024 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\sdi.mbn
FireHose Log: start 252928, num 1024
FireHose Log: Finished sector address 253952
PROGRAM: Written Bytes 0x80000 (64)
Program Size: 0.50 MB
PROGRAM: Replace the partition sectors number 0x18000 to file size in sector 0x12b2c
PROGRAM: Partition 0, Sector: 393216, Length: 76588 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\laf.img
FireHose Log: start 393216, num 76588
FireHose Log: Finished sector address 469804
PROGRAM: Written Bytes 0x2565800 (64)
Program Size: 37.40 MB
PROGRAM: Partition 0, Sector: 0, Length: 34 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\gpt_main0.bin
FireHose Log: start 0, num 34
FireHose Log: Finished sector address 34
PROGRAM: Written Bytes 0x4400 (64)
Program Size: 0.02 MB
PROGRAM: Partition 0, Sector: NUM_DISK_SECTORS-33., Length: 33 Sectors, Sector Size: 512 Bytes
File: C:\Users\aaya\Desktop\g4 unbrick\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\gpt_backup0.bin
FireHose Log: start 61071327, num 33
FireHose Log: Finished sector address 61071360
PROGRAM: Written Bytes 0x4200 (64)
Program Size: 0.02 MB
Total Size: 45.70 MB
Total Time: 12 Seconds
Throughput: 3.81 MB/Seconds
PATCH: Partition 0, Sector: 15, Offset 424 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 15 with 03A3DFDE
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-20., Offset 424 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071340 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 1 with 03A3DFDE
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 48 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-34.
FireHose Log: Patched sector 61071359 with 03A3DFDE
PATCH: Partition 0, Sector: 1, Offset 32 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 1 with 03A3DFFF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 24 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-1.
FireHose Log: Patched sector 61071359 with 03A3DFFF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1, Offset 72 Bytes, Size: 8 Bytes, Value: NUM_DISK_SECTORS-33.
FireHose Log: Patched sector 61071359 with 03A3DFDF
PATCH: Partition 0, Sector: 1, Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(2,7168)
FireHose Log: crc start sector 2, over bytes 7168
FireHose Log: Patched sector 1 with C75ADFEF
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 88 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-33.,7168)
FireHose Log: crc start sector 61071327, over bytes 7168
FireHose Log: Patched sector 61071359 with C75ADFEF
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 1 with 00000000
PATCH: Partition 0, Sector: 1, Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(1,92)
FireHose Log: crc start sector 1, over bytes 92
FireHose Log: Patched sector 1 with 8149E319
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 16 Bytes, Size: 4 Bytes, Value: 0
FireHose Log: Patched sector 61071359 with 00000000
PATCH: Partition 0, Sector: NUM_DISK_SECTORS-1., Offset 16 Bytes, Size: 4 Bytes, Value: CRC32(NUM_DISK_SECTORS-1.,92)
FireHose Log: crc start sector 61071359, over bytes 92
FireHose Log: Patched sector 61071359 with 3D66B311
Total download file size: 45.70459MB
Total download time: 12 Sec
Throughput: 3.706868MB/s
Download Succeed
Finish Download
Click to expand...
Click to collapse
Can you please send me the link and can work any qpst version?

LG G4 Bricked Qualcomm HS-USB QDLoader 9008

Hello,
I know,I know, you will say yet another topic about LG G4 and Qualcomm 9008 problem.
you have right but this problem intrigues me.
Some people proposed a solution for reviving the phone without a box by short-cutting 2 testpoint on the motherbord before connecting to the computer.
so here is what I did, unfortunately without success, but together we can find where is the problem and find a final solution for this big problem.
1- ONLY connect Smartphone USB Side like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- Shortcut with tweezers the two testpoints as described here :
3-On windows 10 x64 Launch QFIL V 2.0.0.5 with Admin Rights :
4- Connect USB Computer side :
5-Choose COM PORT and all settings like this :
6-Clik Download Button
7- unsuccessful operation, this is the log file
Validating Application Configuration
Load APP Configuration
COM:-1
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Process Index:0
Start Download
Program Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
09:28:26: Requested ID 13, file: "C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn"
09:28:26: 273568 bytes transferred in 0.360000 seconds (0.7247MBps)
09:28:26: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
09:28:26: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
09:28:30: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
09:28:30: INFO: Current working dir (cwd): C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\
09:28:30: INFO: Showing network mappings to allow debugging
09:28:30: INFO:
09:28:30: INFO: Trying to store 'rawprogram0.xml' in string table
09:28:30: INFO: Looking for file 'rawprogram0.xml'
09:28:30: INFO: User wants to talk to port '\\.\COM4'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
09:28:40: {ERROR: It took 10.00000000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Writing log to 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
port_trace.txt
Validating Application Configuration
Load APP Configuration
COM:-1
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Process Index:0
Start Download
Program Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
09:28:26: Requested ID 13, file: "C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn"
09:28:26: 273568 bytes transferred in 0.360000 seconds (0.7247MBps)
09:28:26: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
09:28:26: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
09:28:30: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
09:28:30: INFO: Current working dir (cwd): C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\
09:28:30: INFO: Showing network mappings to allow debugging
09:28:30: INFO:
09:28:30: INFO: Trying to store 'rawprogram0.xml' in string table
09:28:30: INFO: Looking for file 'rawprogram0.xml'
09:28:30: INFO: User wants to talk to port '\\.\COM4'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
09:28:40: {ERROR: It took 10.00000000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Writing log to 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
09:28:30: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
09:28:30: DEBUG: Binary build date: Sep 28 2015 @ 17:28:46
09:28:30: DEBUG: Build Version: 15.09.28.17.28.46
09:28:30: INFO: Current working dir (cwd): C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\
09:28:30: INFO: Showing network mappings to allow debugging
09:28:30: DEBUG: Les nouvelles connexions seront m‚moris‚es.
09:28:30: DEBUG:
09:28:30: DEBUG: La liste est vide.
09:28:30: DEBUG:
09:28:30: INFO:
09:28:30: INFO: Trying to store 'rawprogram0.xml' in string table
09:28:30: DEBUG: ==================================================================================
09:28:30: DEBUG: ==================================================================================
09:28:30: INFO: Looking for file 'rawprogram0.xml'
09:28:30: DEBUG: 1. Calling stat(C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml')
09:28:30: DEBUG: 2. Calling fopen('C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml') with AccessMode='rb'
09:28:30: DEBUG: Trying get filesize, calling fseek()
09:28:30: DEBUG: Found 'C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml' (5089 bytes)
09:28:30: DEBUG: 2. Calling fopen('C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml') with AccessMode='r'
09:28:30: DEBUG: Trying get filesize, calling fseek()
09:28:30: DEBUG: User set ZLPAWAREHOST to 1
09:28:30: INFO: User wants to talk to port '\\.\COM4'
09:28:40: DEBUG: port_fd=0xC8
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
09:28:40: {ERROR: OpenPort:5566 It took 10.00000000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable
So where is the problem ? Shortcutting the two points is supposed to open the FireHose port but i tested with twezzers, cooper cable...ect nothing seem to work
any Idea ?
thank you

PS: I have the Link to the files if you want them

Hello, ¿you can share the links?, I need the files for LG H810.
Thank you in advance.

I got the same problem with my H815T. It only allows me to flash the LS991 files, but I lose the imei
serestma said:
Hello, ¿you can share the links?, I need the files for LG H810.
Thank you in advance.
Click to expand...
Click to collapse
H810: https://mega.nz/#!55tACDZC!Ci1pjEr8_wr9Ng2SrPgj42MwxnGybo60de26w2gtimg

I bought a subscription from easy-firmware hoping that they have right emmc_firehose. They are scammers. I have a bricked LG G4 too and since now I have not found a way to unbrick it. Do not waste your time. For H815 the files are wrong and we also need nonfused emmc_firehose_programmer. Also the SD Card method is not working for me tried it with 10 different images and 4 different cards. I am investigating this issue and if I find a solution I will make a tutorial for all fellas that are in trouble.

AZstyle said:
Hello,
I know,I know, you will say yet another topic about LG G4 and Qualcomm 9008 problem.
you have right but this problem intrigues me.
Some people proposed a solution for reviving the phone without a box by short-cutting 2 testpoint on the motherbord before connecting to the computer.
so here is what I did, unfortunately without success, but together we can find where is the problem and find a final solution for this big problem.
1- ONLY connect Smartphone USB Side like this :
2- Shortcut with tweezers the two testpoints as described here :
3-On windows 10 x64 Launch QFIL V 2.0.0.5 with Admin Rights :
4- Connect USB Computer side :
5-Choose COM PORT and all settings like this :
6-Clik Download Button
7- unsuccessful operation, this is the log file
Validating Application Configuration
Load APP Configuration
COM:-1
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Process Index:0
Start Download
Program Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
09:28:26: Requested ID 13, file: "C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn"
09:28:26: 273568 bytes transferred in 0.360000 seconds (0.7247MBps)
09:28:26: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
09:28:26: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
09:28:30: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
09:28:30: INFO: Current working dir (cwd): C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\
09:28:30: INFO: Showing network mappings to allow debugging
09:28:30: INFO:
09:28:30: INFO: Trying to store 'rawprogram0.xml' in string table
09:28:30: INFO: Looking for file 'rawprogram0.xml'
09:28:30: INFO: User wants to talk to port '\\.\COM4'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
09:28:40: {ERROR: It took 10.00000000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Writing log to 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
port_trace.txt
Validating Application Configuration
Load APP Configuration
COM:-1
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
SEARCHPATH:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818
RAWPROGRAM file path: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml
PATCH file path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\patch0.xml
Programmer Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Process Index:0
Start Download
Program Path:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM4 -s 13:C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn 'Current working dir: C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn
09:28:26: Requested ID 13, file: "C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\prog_emmc_firehose_8992_lite.mbn"
09:28:26: 273568 bytes transferred in 0.360000 seconds (0.7247MBps)
09:28:26: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
09:28:26: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Sep 28 2015 @ 17:28:46
Build version: 15.09.28.17.28.46
09:28:30: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
09:28:30: INFO: Current working dir (cwd): C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\
09:28:30: INFO: Showing network mappings to allow debugging
09:28:30: INFO:
09:28:30: INFO: Trying to store 'rawprogram0.xml' in string table
09:28:30: INFO: Looking for file 'rawprogram0.xml'
09:28:30: INFO: User wants to talk to port '\\.\COM4'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
09:28:40: {ERROR: It took 10.00000000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable}
Writing log to 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Fail:FireHose Fail FHLoader Failrocess fail
Finish Download
09:28:30: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
09:28:30: DEBUG: Binary build date: Sep 28 2015 @ 17:28:46
09:28:30: DEBUG: Build Version: 15.09.28.17.28.46
09:28:30: INFO: Current working dir (cwd): C:\Users\Amine\AppData\Roaming\Qualcomm\QFIL\
09:28:30: INFO: Showing network mappings to allow debugging
09:28:30: DEBUG: Les nouvelles connexions seront m‚moris‚es.
09:28:30: DEBUG:
09:28:30: DEBUG: La liste est vide.
09:28:30: DEBUG:
09:28:30: INFO:
09:28:30: INFO: Trying to store 'rawprogram0.xml' in string table
09:28:30: DEBUG: ==================================================================================
09:28:30: DEBUG: ==================================================================================
09:28:30: INFO: Looking for file 'rawprogram0.xml'
09:28:30: DEBUG: 1. Calling stat(C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml')
09:28:30: DEBUG: 2. Calling fopen('C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml') with AccessMode='rb'
09:28:30: DEBUG: Trying get filesize, calling fseek()
09:28:30: DEBUG: Found 'C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml' (5089 bytes)
09:28:30: DEBUG: 2. Calling fopen('C:\G4\8992_QFIL_signing_H818\8992_QFIL_signing_H818\8992_QFIL_signing_H818\rawprogram0.xml') with AccessMode='r'
09:28:30: DEBUG: Trying get filesize, calling fseek()
09:28:30: DEBUG: User set ZLPAWAREHOST to 1
09:28:30: INFO: User wants to talk to port '\\.\COM4'
09:28:40: DEBUG: port_fd=0xC8
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
09:28:40: {ERROR: OpenPort:5566 It took 10.00000000 seconds to open port. Which is longer than 3.000. This indicates your target is not stable
So where is the problem ? Shortcutting the two points is supposed to open the FireHose port but i tested with twezzers, cooper cable...ect nothing seem to work
any Idea ?
thank you
Click to expand...
Click to collapse
qfil needs the firehose.bin i know we dont have one for the sprint varient also have u tried any debrick imgs and sd card method?

Guys just flash the ls991 files and the problem with imei is fixable by flashing some files through fastboot
Do what this says and if you bricked your phone just flash ls991 files again
Only problem which remains is sd card read and write
But you will have a full functional phone

shamescool said:
Guys just flash the ls991 files and the problem with imei is fixable by flashing some files through fastboot
Do what this says and if you bricked your phone just flash ls991 files again
Only problem which remains is sd card read and write
But you will have a full functional phone
Click to expand...
Click to collapse
Please do not mislead other people and try not to answer questions if you didn't try the fixes yourself.
Depending on the bootstack of the CPU SD method might or might nor work.
In theory you can EMMC repair with LS991 but then you will have SecureBoot problems (Error 1006). I didn't try it yet but there is a method where you force off emmc verification by shorting EMMC CMD terminal to GND. But this requires very small soldering, opening the phone and removing the motherboard. The method is tried and working on 4PDA.
EDIT: @AZstyle The firehose are scams, the only working one is the ls991 which I think is a developer one because you will get fastboot access but I can't personally flash anything in LGUP.
When I flash all partitions but bootstack I get 1006 error. I didn't try the soldering method because I have a Medusa Box on the way. I will try USB Repair and if it does not work I will just RMA.

neutrondev said:
Please do not mislead other people and try not to answer questions if you didn't try the fixes yourself.
Depending on the bootstack of the CPU SD method might or might nor work.
In theory you can EMMC repair with LS991 but then you will have SecureBoot problems (Error 1006). I didn't try it yet but there is a method where you force off emmc verification by shorting EMMC CMD terminal to GND. But this requires very small soldering, opening the phone and removing the motherboard. The method is tried and working on 4PDA.
EDIT: @AZstyle The firehose are scams, the only working one is the ls991 which I think is a developer one because you will get fastboot access but I can't personally flash anything in LGUP.
When I flash all partitions but bootstack I get 1006 error. I didn't try the soldering method because I have a Medusa Box on the way. I will try USB Repair and if it does not work I will just RMA.
Click to expand...
Click to collapse
im not misleading anyone here im just sharing my experience
yes you will get 1006 problem by flashing partitions but at least you get a fully functioning phone
the way i mentioned is actually worked for another person here in this forum please test if you still have doubt
my phone is also a refurbished h811 which has a f500l mobo on it and flashing those ls991 files made the phone alive in h811 10n but i did nt have any imei or base band no camera too(even speaker and sensors didnt work)
so i tried flashing some partitions in fastboot and then i had my imei back and also the camera
then i edited f500 tot file with winhex and my phone bricked again(obviously)so i tried flashing ls991 again and now i have a fully functioning phone which cannot be said for sd card...my phone cant write or read any sdcard and its really pissing me of
any suggest for sd card?

H810_ARecovery
¿How to use or flash this files?, tell me please.

neutrondev said:
I bought a subscription from easy-firmware hoping that they have right emmc_firehose. They are scammers. I have a bricked LG G4 too and since now I have not found a way to unbrick it. Do not waste your time. For H815 the files are wrong and we also need nonfused emmc_firehose_programmer. Also the SD Card method is not working for me tried it with 10 different images and 4 different cards. I am investigating this issue and if I find a solution I will make a tutorial for all fellas that are in trouble.
Click to expand...
Click to collapse
u are right, i already tested all this ****, its appear that the only solution is to repair the emmc boot with octopus box or medusa box
next week i'll bring my G4 to a repair store to do this operation.
and I will keep u informed with the results

AZstyle said:
u are right, i already tested all this ****, its appear that the only solution is to repair the emmc boot with octopus box or medusa box
next week i'll bring my G4 to a repair store to do this operation.
and I will keep u informed with the results
Click to expand...
Click to collapse
I bought a medusa box and did the soldering myself. It will not work -_-. I will investigate further but it might need Emmc replacement. Did you try to flash with Qfil using LS991 programmer emmc_firehose? It is very important to know

neutrondev said:
I bought a medusa box and did the soldering myself. It will not work -_-. I will investigate further but it might need Emmc replacement. Did you try to flash with Qfil using LS991 programmer emmc_firehose? It is very important to know
Click to expand...
Click to collapse
Good Remark, I can't remember if I tested with LS911 files, I tested with H815 H818p without sucess.
Do you have the files for LS911? can u share them with me please so i'll give a try.
Thanks

What about that ?
and this

serestma said:
Hello, ¿you can share the links?, I need the files for LG H810.
Thank you in advance.
Click to expand...
Click to collapse
https://mega.nz/#F!1DhXTLAa!kH8MfkbeOKcUWt3T2R6cTQ

@AZstyle Do not flash with those files because I think you will need CPU swap. I think that programmer blows fuses for US version. I did that and now I can't repair it even with MEDUSA I can flash ls991 firmware it boots but with H815 NO.

the_naxhoo said:
I got the same problem with my H815T. It only allows me to flash the LS991 files, but I lose the imei
H810: https://mega.nz/#!55tACDZC!Ci1pjEr8_wr9Ng2SrPgj42MwxnGybo60de26w2gtimg
Click to expand...
Click to collapse
No Problem If You Loosed IMEI I Can Flash IMEI For You Just Poke Me On WhatsApp Only WhatsApp !!!
7000926368
Hope I Can Help You
Sent from my LS-4004 using Tapatalk

neutrondev said:
I bought a medusa box and did the soldering myself. It will not work -_-. I will investigate further but it might need Emmc replacement. Did you try to flash with Qfil using LS991 programmer emmc_firehose? It is very important to know
Click to expand...
Click to collapse
Yes I have flashed ls991 firehose . What do you need to know?
.
Sent from my LG-H815 using XDA Labs

neutrondev said:
I bought a medusa box and did the soldering myself. It will not work -_-. I will investigate further but it might need Emmc replacement. Did you try to flash with Qfil using LS991 programmer emmc_firehose? It is very important to know
Click to expand...
Click to collapse
Medusa Pro Box Works Like Charm !!!
I Fixed 7 LG G4 With It EMMC One
And 3 LG G4 With USB One
If Someone Have Medusa Pro Box And Unable To Fix With It Thats Sure That You Might Have Not Soldered Wire Correct Or Motherboard Has Hardware Problem
Sent from my LS-4004 using Tapatalk

steadfasterX said:
Yes I have flashed ls991 firehose . What do you need to know?
.
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Dont know where i find a ls992 firehose do you?
I bricked my g5 in a freak bad usb cord accident.

Zs570kl non pro loader.img

Possible way to unbrick the zenfone 3 deluxe or any Qualcomm device all is needed is the a working device of the same model if someone with root can run this command in the terminal emulator ((dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960)) to get the files nneeded to boot into bootloader i will then burn that img to a sdcard boot into bootloader and flash with asus tool please if any one can help it will only take a second thanks i appreciate

This is the link i am relying on http://www.aryk.tech/2017/02/how-to-unbrick-debrick-qualcomm-android.html?m=1

dcraffam said:
Possible way to unbrick the zenfone 3 deluxe or any Qualcomm device all is needed is the a working device of the same model if someone with root can run this command in the terminal emulator ((dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960)) to get the files nneeded to boot into bootloader i will then burn that img to a sdcard boot into bootloader and flash with asus tool please if any one can help it will only take a second thanks i appreciate
Click to expand...
Click to collapse
Hey, I checked it out and have followed the instructions. Didn't know this was a thing and thought it would be good to have just in case a flash goes wrong.
Before you download, I'd like for you to confirm that my model was what you asked for: the ZS570KL with a 2.15GHz Snapdragon 820 CPU. If it's correct with you, then this Loader.img should be compatible with your device.
I've removed the old file and am working on a new one.
Good luck and godspeed. Please post an update, and if it works out for you, please document the steps you took to solve the issue!

Zenfone 3
Well i cant say thank you enough for at least trying the 2.15 cpu is the correct device and i still cant thank you enough i appreciate the time and effort

dcraffam said:
Well i cant say thank you enough for at least trying the 2.15 cpu is the correct device the only problem is when i burn the image to the sdcars there is a couple files that dont belong maby if you can move a couple files from your device then try agin the sdcard with files burned to it consit of [Please remove this part] so i believe it will work maby just gotta get some of the files out of there thabks in advance i really do appreciate the effortt
Click to expand...
Click to collapse
Hey! I'm currently in the process of trying to get this sorted out. I don't want to get to into the explanation of it, but would you kindly edit your post to remove that file list. There's nothing personal in it, but I'd rather the contents of my SD card be kept private.
In short, the command you gave me copied the first 165mb of my SD card and created an img file from it. The reason being, mmcblk0 is the SD card. On phones with EMMC, this would normally be the internal memory and mmcblk1 would be the SD card. However, because the Zenfone uses UFS 2.0, it's in a different place and thus acts differently. I'm trying to figure out what the right command is to create what needs to be created. Please give me a moment, and please edit your post and delete the file you downloaded!

dcraffam said:
Possible way to unbrick the zenfone 3 deluxe or any Qualcomm device all is needed is the a working device of the same model if someone with root can run this command in the terminal emulator ((dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960)) to get the files nneeded to boot into bootloader i will then burn that img to a sdcard boot into bootloader and flash with asus tool please if any one can help it will only take a second thanks i appreciate
Click to expand...
Click to collapse
So, I've got bad news, and hopefully good news.
First the bad news. From the research I have done, I believe the method that you've presented here will not work. This is because around the time when the Snapdragon 820 came out, many companies opted to use UFS over EMMC, as it's essentially the next step in flash storage evolution. EMMC and MicroSD cards were treated essentially the same way, and thus some phones were able to "boot" off the SD card using the first 165mb of the bootloader. Since UFS isn't treated the same way and has to be read differently, the ability to boot off the SD card became lost with the change of storage.
Now for the hopefully good news. I looked into your xda post history to see the other methods you tried and noticed you posted in a thread about QFIL looking for the proper files. After some investigation into the process, I've stumbled upon what I think may be what you need. I'm not entirely clear about the process, but I think I have a rough estimate of what needs to be done. I'm not home right now, so I can't confirm some of the steps, but hopefully I can guide you through it. If any confusion occurs, I'll hopefully be able to clarify it while I'm home. Please see my next comment for the process.

qfil
asianflipboy said:
So, I've got bad news, and hopefully good news.
First the bad news. From the research I have done, I believe the method that you've presented here will not work. This is because around the time when the Snapdragon 820 came out, many companies opted to use UFS over EMMC, as it's essentially the next step in flash storage evolution. EMMC and MicroSD cards were treated essentially the same way, and thus some phones were able to "boot" off the SD card using the first 165mb of the bootloader. Since UFS isn't treated the same way and has to be read differently, the ability to boot off the SD card became lost with the change of storage.
Now for the hopefully good news. I looked into your xda post history to see the other methods you tried and noticed you posted in a thread about QFIL looking for the proper files. After some investigation into the process, I've stumbled upon what I think may be what you need. I'm not entirely clear about the process, but I think I have a rough estimate of what needs to be done. I'm not home right now, so I can't confirm some of the steps, but hopefully I can guide you through it. If any confusion occurs, I'll hopefully be able to clarify it while I'm home. Please see my next comment for the process.
Click to expand...
Click to collapse
thanks for the research any thing you can do to help is greatly appreciated

A (Rough!!!) Guide to (Hopefully) Unbricking the ZS570KL from 9008 issue
So let's get started, @dcraffam.
As a *DISCLAIMER* I am not responsible for any damage this may cause your phone (Although how much more damage can really be done when it's bricked?)
This is all based on theory, as my device isn't bricked and I don't intend on attempting to fix a working device. That being said, this is good knowledge to have for the future, so I'm making this to hopefully help those who might need it in the future.
The prerequisites for this, to the best of my knowledge, are as follows:
A ZS570KL that, when plugged into a computer, produces a device in your device manager that has the number 9008 in it
A computer running Windows
9008, to my knowledge, is like Snow White waiting for Prince Charming's lips. It's essentially a brick, but with the right tools, you can kickstart it to a state where it can make a full recovery. I stumbled upon some tools that I think can get the job done, but it will be up to you to test them out. I wish you the best of luck.
The first one you should grab is:
The Qualcomm USB Drivers
https://androiddatahost.com/nbyn6
Pretty straightforward. You'll need these so your computer can properly interact with your device.
The second thing to grab is:
The Qualcomm Flash Image Loader (QFIL) Tool
https://androiddatahost.com/flkn2
This is the program that should be able to bring your phone back, your Prince Charming, if you will. It's not an installer, so just extract the files to a known folder and keep it open. You'll need to access it soon.
I obtained both of these files from this website's guide:
https://androidmtk.com/use-qualcomm-flash-image-loader-qfil
In fact, you'll be pretty much following that guide, but with a couple of changes. But before that, you'll need a couple more things.
Stock ZS570KL FRP
https://drive.google.com/open?id=1s4nas0iP_rLcnLLwh348krvLUNP57YF2
And you may or may not need this one but
ZS570KL 8996 elf file
https://drive.google.com/file/d/1GgIDDYofsyn_F__6YveofDgYsXaYFvZr/view?usp=drivesdk
These I also stumbled upon. They're the files necessary to get the QFIL tool to work, and are specifically for your phone. The first one is especially important, as that's the stock firmware that will be loaded onto your phone. Extract that into a separate folder that's easy to locate. The second one is specific to your phone, but there's already one in the FRP zip. Only use it if the one in the FRP zip doesn't work. They seem to be correct for the most part, but I found them in a weird website, so be warned. That website was:
https://addrom.com/rom-stock-asus-zenfone-3-deluxe-z016d-zs570kl/
So to recap:
Download the files
Install the drivers
Extract the files into easy to find places.
https://www.youtube.com/watch?v=JxlMntGp6vs
Now, what follows will be the edited edition of the video above. I believe it needs to be adjusted because it's, by default, in EMMC mode and not UFS mode. I'm home now, so I'm making the proper updates. Hopefully they work for you.
The instructions are as follows:
1. Open up QFIL.exe
2. On the top left, there's a button called configuration. Hit that and then Firehose Configuration.
3. A popup should appear. The important thing to change is a drop down menu that says "EMMC". Change it to "UFS" instead. Hit OK to go back to QFIL.
4. Plug your phone in, and click SelectPort on the top right of QFIL. Your phone should be there. Select it and hit OK.
5. In QFIL, hit Browse, navigate to the extracted FRP zip and select "prog_ufs_firehose_8996_ddr.elf" It should automatically select the folder as the build folder.
6. Next, hit "Load XML...", and "rawprogram0.xml" should pop up. Select that one, and then "patch0.xml"
7. If all goes well, you'll be able to hit "Download" below "Load XML." If you can't, try going through the steps with the 8996 ZS570KL elf file.
Hopefully nothing fails and your phone reboots into stock firmware. From there, I recommend updating to the latest firmware.
If this method fails you, there are some other Qualcomm image flashers that are available to try. Hopefully we can find one that works for you.
Good luck! Please let me know if you encounter any issues or if you're successful!

qfil
so i thank you agin for your research sadly the files did not work for me i have tried maby 5 or 6 qfil roms and my phone wont accept the digital signature its saying binary build date jun 17 2016 but there is no firmware that goes back that far i guess theres no hope for me unless you can try to make a back up with qpst software download and i flash or something i really dont see a save anymore but if you do find somehing else please let mee know thanks i really appreiate it

dcraffam said:
so i thank you agin for your research sadly the files did not work for me i have tried maby 5 or 6 qfil roms and my phone wont accept the digital signature its saying binary build date jun 17 2016 but there is no firmware that goes back that far i guess theres no hope for me unless you can try to make a back up with qpst software download and i flash or something i really dont see a save anymore but if you do find somehing else please let mee know thanks i really appreiate it
Click to expand...
Click to collapse
Darn, was really hoping it would work. Would you mind running it again, and then copying and saving the output text, and then post it here? I'd like to use it to research it further.
Also, what do you mean by make a backup? Do you have more information regarding this process?

qfil port_trace.txt
16:01:22: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Users\anthony\Downloads\Qualcomm_Flash_Image_Loader_v2.0.0.5\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml,rawprogram1.xml,rawprogram2.xml,rawprogram3.xml,rawprogram4.xml,rawprogram5.xml --search_path=C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=UFS
************************************************
16:01:22: DEBUG: Binary build date: Oct 31 2016 @ 22:51:02
16:01:22: DEBUG: Build Version: 16.10.31.22.51.02
16:01:22: INFO: Current working dir (cwd): C:\Users\anthony\AppData\Roaming\Qualcomm\QFIL\
16:01:22: INFO: Showing network mappings to allow debugging
16:01:22: DEBUG: New connections will be remembered.
16:01:22: DEBUG:
16:01:22: DEBUG: There are no entries in the list.
16:01:22: DEBUG:
16:01:22: INFO:
16:01:22: INFO: Trying to store 'rawprogram0.xml' in string table
16:01:22: DEBUG: ==================================================================================
16:01:22: DEBUG: ==================================================================================
16:01:22: INFO: Looking for file 'rawprogram0.xml'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\rawprogram0.xml')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\rawprogram0.xml') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\rawprogram0.xml' (5303 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\rawprogram0.xml') with AccessMode='r'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: ==================================================================================
16:01:22: DEBUG: ==================================================================================
16:01:22: INFO: Looking for file 'persist.img'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\persist.img')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\persist.img') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\persist.img' (4804840 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\persist.img') with AccessMode='rb'
16:01:22: INFO: Reading through sparse file 'persist.img' and pulling out relevant header information...
16:01:22: INFO: File persist.img is a sparse file, being split up into 1 separate XML tags
16:01:22: DEBUG:
16:01:22: INFO: Looking for file 'factory.img'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\factory.img')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\factory.img') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\factory.img' (33554432 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\factory.img') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: INFO: cache.img is a sparse image
16:01:22: DEBUG: ==================================================================================
16:01:22: DEBUG: ==================================================================================
16:01:22: INFO: Looking for file 'cache.img'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img' (6398160 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img') with AccessMode='rb'
16:01:22: INFO: cache.img is a sparse image
16:01:22: DEBUG: ==================================================================================
16:01:22: DEBUG: ==================================================================================
16:01:22: INFO: Looking for file 'cache.img'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img' (6398160 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img') with AccessMode='rb'
16:01:22: INFO: cache.img is a sparse image
16:01:22: DEBUG: ==================================================================================
16:01:22: DEBUG: ==================================================================================
16:01:22: INFO: Looking for file 'cache.img'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img' (6398160 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\cache.img') with AccessMode='rb'
16:01:22: DEBUG: ==================================================================================
16:01:22: DEBUG: ==================================================================================
16:01:22: INFO: Looking for file 'devcfg.mbn'
16:01:22: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\devcfg.mbn')
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\devcfg.mbn') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
16:01:22: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\devcfg.mbn' (40024 bytes)
16:01:22: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\devcfg.mbn') with AccessMode='rb'
16:01:22: DEBUG: Trying get filesize, calling fseek()
[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img' (139675944 bytes)
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: INFO: userdata.img is a sparse image
16:01:23: DEBUG: ==================================================================================
16:01:23: DEBUG: ==================================================================================
16:01:23: INFO: Looking for file 'userdata.img'
16:01:23: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img')
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: DEBUG: Trying get filesize, calling fseek()
16:01:23: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img' (139675944 bytes)
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: INFO: userdata.img is a sparse image
16:01:23: DEBUG: ==================================================================================
16:01:23: DEBUG: ==================================================================================
16:01:23: INFO: Looking for file 'userdata.img'
16:01:23: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img')
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: DEBUG: Trying get filesize, calling fseek()
16:01:23: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img' (139675944 bytes)
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: INFO: userdata.img is a sparse image
16:01:23: DEBUG: ==================================================================================
16:01:23: DEBUG: ==================================================================================
16:01:23: INFO: Looking for file 'userdata.img'
16:01:23: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img')
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: DEBUG: Trying get filesize, calling fseek()
16:01:23: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img' (139675944 bytes)
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: INFO: userdata.img is a sparse image
16:01:23: DEBUG: ==================================================================================
16:01:23: DEBUG: ==================================================================================
16:01:23: INFO: Looking for file 'userdata.img'
16:01:23: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img')
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: DEBUG: Trying get filesize, calling fseek()
16:01:23: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img' (139675944 bytes)
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: INFO: userdata.img is a sparse image
16:01:23: DEBUG: ==================================================================================
16:01:23: DEBUG: ==================================================================================
16:01:23: INFO: Looking for file 'userdata.img'
16:01:23: DEBUG: 1. Calling stat(C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img')
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: DEBUG: Trying get filesize, calling fseek()
16:01:23: DEBUG: Found 'C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img' (139675944 bytes)
16:01:23: DEBUG: 2. Calling fopen('C:\Program Files (x86)\Qualcomm\QPST\bin\[up_vnROM.net]_MR1.2_WW_ZS570KL-4.12.40.1781-rel-user-20170117-secured-ufs-releaseFRP\userdata.img') with AccessMode='rb'
16:01:23: INFO: userdata.img is a sparse image
16:01:24: DEBUG: XML FILE (111 bytes): CharsInBuffer=2861-111=2750
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Binary build date: Jun 17 2016 @ 10:09:02"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'Binary build date: Jun 17 2016 @ 10:09:02'
16:01:24: DEBUG: XML FILE (110 bytes): CharsInBuffer=2750-110=2640
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Chip serial num: 4294967295 (0xffffffff)"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'Chip serial num: 4294967295 (0xffffffff)'
16:01:24: DEBUG: XML FILE (234 bytes): CharsInBuffer=2640-234=2406
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke "/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke '
16:01:24: DEBUG: XML FILE (139 bytes): CharsInBuffer=2406-139=2267
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="VIP - Validated Image Programming is enabled - Validation is enabled."/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'VIP - Validated Image Programming is enabled - Validation is enabled.'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=2267-108=2159
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Image Total Size = 0xE3 (227)"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'Image Total Size = 0xE3 (227)'
16:01:24: DEBUG: XML FILE (101 bytes): CharsInBuffer=2159-101=2058
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="HeaderIs80Bytes = 0x0"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'HeaderIs80Bytes = 0x0'
16:01:24: DEBUG: XML FILE (138 bytes): CharsInBuffer=2058-138=1920
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.sw_type = 0x3 (DeviceProgrammer *insists* on this)"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.sw_type = 0x3 (DeviceProgrammer *insists* on this)'
16:01:24: DEBUG: XML FILE (101 bytes): CharsInBuffer=1920-101=1819
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.sw_version = 0x0"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.sw_version = 0x0'
16:01:24: DEBUG: XML FILE (102 bytes): CharsInBuffer=1819-102=1717
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.header_len_1 = 0x28"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.header_len_1 = 0x28'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=1717-108=1609
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.code_ptr_1 = 0xF54AC112"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.code_ptr_1 = 0xF54AC112'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=1609-108=1501
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.code_len_1 = 0x6F636E65"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.code_len_1 = 0x6F636E65'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=1501-108=1393
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.x509_chain_ptr = 0x1782EE58"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.x509_chain_ptr = 0x1782EE58'
16:01:24: DEBUG: XML FILE (107 bytes): CharsInBuffer=1393-107=1286
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.x509_chain_len = 0xA3E3F20"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.x509_chain_len = 0xA3E3F20'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=1286-108=1178
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.signature_ptr = 0x5CB92A76"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.signature_ptr = 0x5CB92A76'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=1178-108=1070
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.signature_len = 0x5455223D"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.signature_len = 0x5455223D'
16:01:24: DEBUG: XML FILE (108 bytes): CharsInBuffer=1070-108=962
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="image_info.header_ptr_1 = 0x85E14DA0"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'image_info.header_ptr_1 = 0x85E14DA0'
16:01:24: DEBUG: XML FILE (170 bytes): CharsInBuffer=962-170=792
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="AuthenticateImage() Returning FALSE, secboot_authenticate() returned 0x2 (not E_SECBOOT_SUCCESS=0x0)"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'AuthenticateImage() Returning FALSE, secboot_authenticate() returned 0x2 (not E_SECBOOT_SUCCESS=0x0)'
16:01:24: DEBUG: XML FILE (116 bytes): CharsInBuffer=792-116=676
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR 1: Line 1140: AUTHENTICATE_IMAGE_FAILURE"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'ERROR 1: Line 1140: AUTHENTICATE_IMAGE_FAILURE'
16:01:24: DEBUG: XML FILE (138 bytes): CharsInBuffer=676-138=538
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Failed to authenticate Digital Signature, resetting validation state"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'Failed to authenticate Digital Signature, resetting validation state'
16:01:24: DEBUG: XML FILE (120 bytes): CharsInBuffer=538-120=418
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR 11: Line 790: DIGITAL_SIGNATURE_DID_NOT_PASS"/>
</data>
-------------------------------------------------------------------------------------------
16:01:24: INFO: TARGET SAID: 'ERROR 11: Line 790: DIGITAL_SIGNATURE_DID_NOT_PASS'
16:01:24: DEBUG: XML FILE (79 bytes): CharsInBuffer=418-79=339
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" />
</data>
-------------------------------------------------------------------------------------------
16:01:24: DEBUG: Response was 'NAK'
16:01:24: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
16:01:24: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
16:01:24: INFO: Something failed. The target rejected your <configure>. Please inspect log for more information

@dcraffam, what's the version of QFIL that you're using? I don't see any mentions of some of the keywords I was expecting (i.e. Sahara, firehose, rawprogram0.xml)
The QFIL I linked is 2.0.1.1. I think the older one isn't compatible with UFS.

i uploaded the wrong file
asianflipboy said:
@dcraffam, what's the version of QFIL that you're using? I don't see any mentions of some of the keywords I was expecting (i.e. Sahara, firehose, rawprogram0.xml)
The QFIL I linked is 2.0.1.1. I think the older one isn't compatible with UFS.
Click to expand...
Click to collapse
i am using the version you provided 2.0.1.1 that was just a old port trace.. thanks for the help and the interest in the topic

dcraffam said:
i am using the version you provided 2.0.1.1 that was just a old port trace.. thanks for the help and the interest in the topic
Click to expand...
Click to collapse
I took a look at the updated trace. Looks good up to where the computer tries to interact with the device. It seems there's a signature validation it's failing, possibly because the source FRP file isn't official.
In Configure > Firehose configuration, is the option for validation on? If it's on, try running with it off.
When your phone is plugged in and all the files are set, does an "Advanced Options" button show up? If it does, would you mind screenshotting it and posting it on here?
Also, can you search for the log it mentions at the end of the file? No idea where it gets generated, but it's probably in a folder or a file in the same directory called log.

qfil
asianflipboy said:
@dcraffam, what's the version of QFIL that you're using? I don't see any mentions of some of the keywords I was expecting (i.e. Sahara, firehose, rawprogram0.xml)
The QFIL I linked is 2.0.1.1. I think the older one isn't compatible with UFS.
Click to expand...
Click to collapse
asianflipboy said:
I took a look at the updated trace. Looks good up to where the computer tries to interact with the device. It seems there's a signature validation it's failing, possibly because the source FRP file isn't official.
In Configure > Firehose configuration, is the option for validation on? If it's on, try running with it off.
When your phone is plugged in and all the files are set, does an "Advanced Options" button show up? If it does, would you mind screenshotting it and posting it on here?
Also, can you search for the log it mentions at the end of the file? No idea where it gets generated, but it's probably in a folder or a file in the same directory called log.
Click to expand...
Click to collapse
i have to agree with you after trying almost everything i can think of even other programs to just try to send a specific file it all fails to verify so maby the source isnt official as far as the port_trace .txt ill upload it

using the zte axon 7 edl tool it is able to communicate with my phone in edl mode once i replace the firehose prgram in the tools folder if you can get your phone in download mode there is a script to backup some partions includeing the edl boot mode efs reecovery and full maby if you backed up your edl i can restore mine from it if your willing to try it...... that is the zte axon 7 tool kit i couldnt upload the firehose programmer but the on you provided should work its simple just unzip run as admin and its really detailed with info once you open it up thanks aot if you do decide to try i feel like we are running out of ideas lol happy days:good::good:

dcraffam said:
using the zte axon 7 edl tool it is able to communicate with my phone in edl mode once i replace the firehose prgram in the tools folder if you can get your phone in download mode there is a script to backup some partions includeing the edl boot mode efs reecovery and full maby if you backed up your edl i can restore mine from it if your willing to try it...... that is the zte axon 7 tool kit i couldnt upload the firehose programmer but the on you provided should work its simple just unzip run as admin and its really detailed with info once you open it up thanks aot if you do decide to try i feel like we are running out of ideas lol happy days:good::good:
Click to expand...
Click to collapse
I tried the tool, but it was having trouble putting my phone into EDL mode. I tried various methods, like vol+ and vol- while rebooting and changing the fastboot command to send and edl reboot command but it didn't stick. I'll keep trying to get it to work though.
In any case, did you try the Xiaomi Mi Flash tool? Apparently it can work better than QFIL in certain cases.

hard bricked willow (redmi note 8t) no fastboot / no recovery

I managed to flash the wrong firmware (ginkgo fw => willow) and now the thing is bricked. the only sign of life is a COM30 device under MiFlash / QFIL.
Is there any chance I can unbrick the device myself? I do not want to open it though....

I just found this: https://forum.xda-developers.com/t/...ight-turns-on-for-a-second-using-edl.4228641/
I followed the instructions, but I also get the sahara fail. QFIL says QDLoader 9008 (COM30) - is this EDL mode?

lueromat said:
....
I followed the instructions, but I also get the sahara fail. QFIL says QDLoader 9008 (COM30) - is this EDL mode?
Click to expand...
Click to collapse
Yes, this looks like EDL on com port 30.
You only get QDloader 9008 if you have installed the drivers before, so maybe these are old versions.

Elinx said:
Yes, this looks like EDL on com port 30.
You only get QDloader 9008 if you have installed the drivers before, so maybe these are old versions.
Click to expand...
Click to collapse
sorry, confused - are you sayin this is EDL mode? this is what I see in my device manager:
Qualcomm HS-USB QDLoader 9008 (COM30)

lueromat said:
sorry, confused - are you sayin this is EDL mode? this is what I see in my device manager:
Qualcomm HS-USB QDLoader 9008 (COM30)
Click to expand...
Click to collapse
Yes, if fastboot and recovery aren't possible anymore, you can with testpoint to EDL. But it looks that your device already is in EDL mode

ok - so I don't have to open it up?
does anyone have any idea why I get the error in GFIL?
or any other comments or suggestions?
sucks to have a brick

lueromat said:
...
does anyone have any idea why I get the error in GFIL?
...
Click to expand...
Click to collapse
Try first to update the drivers

Download willow fastboot ROM and extract. Download the programmer(need decompress) and replace the original one which is in "images" folder. Run Xiaomi Flash and select the fastboot ROM folder and it gets ready.
Long press your power button more than 10s so the device could do a power cycle. Then, connect the device to the computer and start flashing immediately.
The programmer posted here is for ginkgo. But ginkgo and willow have same chipset so you can try again.
Good luck.

lueromat said:
...
or any other comments or suggestions?
...
Click to expand...
Click to collapse
Yuki1001 said:
Download willow fastboot ROM and extract. ......
Click to expand...
Click to collapse
Ofcourse, as Yuki1001 said.
Don't use the mentioned Ginkgo rom of the guide, but a fastboot Willow rom. The same as your Willow was delivered from factory or newer. The patched firehose file is the same. Maybe then the flashing will run without error.

Yuki1001 said:
Download willow fastboot ROM and extract. Download the programmer(need decompress) and replace the original one which is in "images" folder. Run Xiaomi Flash and select the fastboot ROM folder and it gets ready.
Long press your power button more than 10s so the device could do a power cycle. Then, connect the device to the computer and start flashing immediately.
Click to expand...
Click to collapse
so this worked! the xiaomi flash tool did something, and it said "flashing success" afterwards. but now nothing happens. shouldn't it be able to boot now that the correct image has been flashed? or do I now have to use QFIL?

After "flashing succes", the image should be flashed. Try to boot with long press power

Elinx said:
After "flashing succes", the image should be flashed. Try to boot with long press power
Click to expand...
Click to collapse
hmm doesn't work unfortunately. I even tried the procedure again: soo it appears that something has been flashed, but afterwards I cannot get it to boot and it still says Qualcomm HS-USB QDLoader 9008 (COM30). maybe it doesn't work with xiaomi flash tool?

lueromat said:
so this worked! the xiaomi flash tool did something, and it said "flashing success" afterwards. but now nothing happens. shouldn't it be able to boot now that the correct image has been flashed? or do I now have to use QFIL?
Click to expand...
Click to collapse
Are you sure the fastboot ROM you flashed is the correct WILLOW fastboot ROM?
Download latest willow fastboot ROM here.
As I said above, extract fastboot ROM and replace the programmer in "images" folder. Then flash again. Please give a screenshot of XiaomiFlash so I could understand your problem better.
You can also try to flash using QFIL.

lueromat said:
hmm doesn't work unfortunately. I even tried the procedure again: soo it appears that something has been flashed, but afterwards I cannot get it to boot and it still says Qualcomm HS-USB QDLoader 9008 (COM30). maybe it doesn't work with xiaomi flash tool?
Click to expand...
Click to collapse
chiming in with my experience here: try to open & disconnect the battery for about 15 seconds after flashing success.
happened with my old Mi 5s Plus, it was stuck in FORCED EDL mode, no way to recover except by battery disconnection after successful flash.

Crescendo Xenomorph said:
... try to open & disconnect the battery for about 15 seconds after flashing success.
..
Click to expand...
Click to collapse
You could be right with this, because I only had a succesfull flash/startup with disconnected battery.
I'm not sure, but it could be that this was the same behaviour with my phone. Phone didn't start after EDL flash.
I hadn't noticed it because I immediately flashed (succesfull) again, with disconnected battery.
Problem is, lueromat hasn't opened his phone for EDL and tries to prevent this.
Maybe full batterydrain will work too.
Question....... is it possible to start fastboot now?
In that case you can try to flash a fastboot rom the normal way again with flashall.bat.

Elinx said:
You could be right with this, because I only had a succesfull flash/startup with disconnected battery.
I'm not sure, but it could be that this was the same behaviour with my phone. Phone didn't start after EDL flash.
I hadn't noticed it because I immediately flashed (succesfull) again, with disconnected battery.
Problem is, lueromat hasn't opened his phone for EDL and tries to prevent this.
Maybe full batterydrain will work too.
Question....... is it possible to start fastboot now?
In that case you can try to flash a fastboot rom the normal way again with flashall.bat.
Click to expand...
Click to collapse
I own a RN8(ginkgo) and it's not easy to open the back cover. I manually went to EDL with a fastboot command and do an experiment to confirm it could flash without errors.. The result is that the phone reboot and boot up with no problems.
Maybe he could try to force reboot by sending reboot command if lueromat did a correct flashing?

@lueromat Try to send reboot command manually.
XML:
<?xml version="1.0"?>
<data>
<power value="reset" />
</data>
(The power tag could let the device reboot to system/to edl with correct value)
Create a xml file and send it to the phone manually after flashing.
Rename the xml to "reboot.xml". I wondering what will happen after you send this command(xml).
Code:
fh_loader.exe --port=\\.\COM30 --sendxml=reboot.xml --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc

Elinx said:
Problem is, lueromat hasn't opened his phone for EDL and tries to prevent this.
Maybe full batterydrain will work too.
Click to expand...
Click to collapse
Yuki1001 said:
Maybe he could try to force reboot by sending reboot command if lueromat did a correct flashing?
Click to expand...
Click to collapse
I think you guys may be on to something. I was also thinking that I somehow have to get out of EDL mode, either through waiting, or forcing. Opening the device is a PITA and I'd rather wait until the battery dies (which I guess may take weeks with the screen and all off - good I ordered the poco m3 as replacement ).
So I tried the xml command via fh_loader, but it didn't quite work - see log below. either the xml syntax is wrong, or my phone is still in "sahara-mode" - whatever that is. I tried to play around with QFIL before, maybe it's because of that.
Code:
16:34:07: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
fh_loader.exe --port=\\.\COM40 --sendxml=reboot.xml --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
16:34:07: DEBUG: Binary build date: Jun 25 2019 @ 03:16:10
16:34:07: DEBUG: Build Version: 19.06.25.03.16.10
16:34:07: INFO: Current working dir (cwd): C:\Program Files (x86)\Qualcomm\QPST\bin\
16:34:07: INFO: Showing network mappings to allow debugging
16:34:07: DEBUG: New connections will be remembered.
16:34:07: DEBUG:
16:34:07: DEBUG: There are no entries in the list.
16:34:07: DEBUG:
16:34:07: INFO:
16:34:07: INFO: Trying to store 'reboot.xml' in string table
16:34:07: DEBUG: ==================================================================================
16:34:07: DEBUG: ==================================================================================
16:34:07: INFO: Looking for file 'reboot.xml'
16:34:07: DEBUG: 2. Calling stat(reboot.xml)
16:34:07: DEBUG: 2. Calling fopen('reboot.xml') with AccessMode='rb'
16:34:07: DEBUG: Trying get filesize, calling fseek()
16:34:07: DEBUG: Found 'reboot.xml' (65 bytes) in local directory 'C:\Program Files (x86)\Qualcomm\QPST\bin\
16:34:07: DEBUG: 2. Calling fopen('reboot.xml') with AccessMode='r'
16:34:07: DEBUG: Trying get filesize, calling fseek()
16:34:07: DEBUG: User set ZLPAWAREHOST to 1
16:34:07: INFO: User wants to talk to port '\\.\COM40'
16:34:07: DEBUG: port_fd=0xE0
16:34:07: INFO: Took 0.00000000 seconds to open port
16:34:07: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:34:07: INFO: Sending <configure>
16:34:07: DEBUG: CHANNEL DATA (P0000) (H00202) ( 228 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="emmc" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>
============================================================================================================
16:34:07: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
16:34:07: DEBUG: CHANNEL DATA (64 bytes) <-- TARGET to HOST
16:34:07: DEBUG: CharsInBuffer = 64
16:34:07: DEBUG: printBuffer:6017 PRETTYPRINT Buffer is 64 bytes
16:34:07: DEBUG: printBuffer:6094 01 00 00 00 30 00 00 00 02 00 00 00 01 00 00 00 ....0...........
16:34:07: DEBUG: printBuffer:6094 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
16:34:07: DEBUG: printBuffer:6094 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
16:34:07: DEBUG: printBuffer:6094 04 00 00 00 10 00 00 00 0D 00 00 00 01 00 00 00 ................
16:34:07: DEBUG: printBuffer:6107
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
16:34:07: {ERROR: DetermineTag:6861 XML not formed correctly. Expected a < character at loc 0
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
16:34:07: {ERROR: GetNextPacket:7935 3. TAG not found or recognized
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
16:34:07: {ERROR: GetNextPacket:7945
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13:prog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work

lueromat said:
I think you guys may be on to something. I was also thinking that I somehow have to get out of EDL mode, either through waiting, or forcing. Opening the device is a PITA and I'd rather wait until the battery dies (which I guess may take weeks with the screen and all off - good I ordered the poco m3 as replacement ).
So I tried the xml command via fh_loader, but it didn't quite work - see log below. either the xml syntax is wrong, or my phone is still in "sahara-mode" - whatever that is. I tried to play around with QFIL before, maybe it's because of that.
Code:
16:34:07: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
fh_loader.exe --port=\\.\COM40 --sendxml=reboot.xml --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
16:34:07: DEBUG: Binary build date: Jun 25 2019 @ 03:16:10
16:34:07: DEBUG: Build Version: 19.06.25.03.16.10
16:34:07: INFO: Current working dir (cwd): C:\Program Files (x86)\Qualcomm\QPST\bin\
16:34:07: INFO: Showing network mappings to allow debugging
16:34:07: DEBUG: New connections will be remembered.
16:34:07: DEBUG:
16:34:07: DEBUG: There are no entries in the list.
16:34:07: DEBUG:
16:34:07: INFO:
16:34:07: INFO: Trying to store 'reboot.xml' in string table
16:34:07: DEBUG: ==================================================================================
16:34:07: DEBUG: ==================================================================================
16:34:07: INFO: Looking for file 'reboot.xml'
16:34:07: DEBUG: 2. Calling stat(reboot.xml)
16:34:07: DEBUG: 2. Calling fopen('reboot.xml') with AccessMode='rb'
16:34:07: DEBUG: Trying get filesize, calling fseek()
16:34:07: DEBUG: Found 'reboot.xml' (65 bytes) in local directory 'C:\Program Files (x86)\Qualcomm\QPST\bin\
16:34:07: DEBUG: 2. Calling fopen('reboot.xml') with AccessMode='r'
16:34:07: DEBUG: Trying get filesize, calling fseek()
16:34:07: DEBUG: User set ZLPAWAREHOST to 1
16:34:07: INFO: User wants to talk to port '\\.\COM40'
16:34:07: DEBUG: port_fd=0xE0
16:34:07: INFO: Took 0.00000000 seconds to open port
16:34:07: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
16:34:07: INFO: Sending <configure>
16:34:07: DEBUG: CHANNEL DATA (P0000) (H00202) ( 228 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="emmc" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>
============================================================================================================
16:34:07: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
16:34:07: DEBUG: CHANNEL DATA (64 bytes) <-- TARGET to HOST
16:34:07: DEBUG: CharsInBuffer = 64
16:34:07: DEBUG: printBuffer:6017 PRETTYPRINT Buffer is 64 bytes
16:34:07: DEBUG: printBuffer:6094 01 00 00 00 30 00 00 00 02 00 00 00 01 00 00 00 ....0...........
16:34:07: DEBUG: printBuffer:6094 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
16:34:07: DEBUG: printBuffer:6094 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
16:34:07: DEBUG: printBuffer:6094 04 00 00 00 10 00 00 00 0D 00 00 00 01 00 00 00 ................
16:34:07: DEBUG: printBuffer:6107
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
16:34:07: {ERROR: DetermineTag:6861 XML not formed correctly. Expected a < character at loc 0
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
16:34:07: {ERROR: GetNextPacket:7935 3. TAG not found or recognized
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
16:34:07: {ERROR: GetNextPacket:7945
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13:prog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
Click to expand...
Click to collapse
Did you send the firehose programmer before you send the reboot xml?
As the log said, may be you forgot to send programmer manually?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do a power cycle and send "prog_emmc_firehose_Sm6125_ddr.elf" using QSaharaServer.exe first:
Code:
QSaharaServer.exe -u 40 -s 13:"prog_emmc_firehose_Sm6125_ddr.elf"
The parameter "-u" is your port number(example COM40 is -u 40).
Then send xml.
Code:
fh_loader.exe --port=\\.\COM40 --sendxml=reboot.xml --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
You need to send the programmer first to switch the communication protocol to firehose then use fh_loader send reboot xml command. Sorry forgetting to tell you that you need to send programmer first. In fact, before your any operation in EDL mode, your flashtool(miflash/qifl etc..) send the programmer automatically before sending rawprogram0.xml. You can check the flash log for this.
If device reboot but still in EDL mode, may be you need to wait until the battery runs out because I don't know more usage of power command to force reboot to system.
Hope your phone could reboot and back to life.

those commands completed without problem, and after the fh command the phone is disconnected in my device manager for a second, so it appears the xml command worked. however, when it reappears in device manager it's still on com40, and I cannot boot into bootloader. maybe a different command will do it? at least it's listening. here is the log:
Code:
C:\Program Files (x86)\Qualcomm\QPST\bin>QSaharaServer.exe -u 40 -s 13:"prog_emmc_firehose_Sm6125_ddr.elf"
Binary build date: Jun 25 2019 @ 03:16:15
QSAHARASERVER CALLED LIKE THIS: 'QSaharaServer.ex'Current working dir: C:\Program Files (x86)\Qualcomm\QPST\bin
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: prog_emmc_firehose_Sm6125_ddr.elf
18:15:01: Requested ID 13, file: "C:\Program Files (x86)\Qualcomm\QPST\bin\prog_emmc_firehose_Sm6125_ddr.elf"
18:15:01: 591740 bytes transferred in 0.125000 seconds (4.5146MBps)
18:15:01: File transferred successfully
18:15:01: Sahara protocol completed
C:\Program Files (x86)\Qualcomm\QPST\bin>fh_loader.exe --port=\\.\COM40 --sendxml=reboot.xml --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
Base Version: 19.06.10.18.44
Binary build date: Jun 25 2019 @ 03:16:10
Incremental Build version: 19.06.25.03.16.10
18:15:07: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
fh_loader.exe --port=\\.\COM40 --sendxml=reboot.xml --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
18:15:07: INFO: Current working dir (cwd): C:\Program Files (x86)\Qualcomm\QPST\bin\
18:15:07: INFO: Showing network mappings to allow debugging
18:15:07: INFO:
18:15:07: INFO: Trying to store 'reboot.xml' in string table
18:15:07: INFO: Looking for file 'reboot.xml'
18:15:07: INFO: User wants to talk to port '\\.\COM40'
18:15:07: INFO: Took 0.00000000 seconds to open port
18:15:07: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
18:15:07: INFO: Sending <configure>
18:15:07: INFO: TARGET SAID: 'INFO: Binary build date: Jul 3 2019 @ 22:23:56'
18:15:07: INFO: TARGET SAID: 'INFO: Binary build date: Jul 3 2019 @ 22:23:56
'
18:15:07: INFO: TARGET SAID: 'INFO: Chip serial num: 570422912 (0x21fff680)'
18:15:07: INFO: TARGET SAID: 'INFO: Supported Functions (14):'
18:15:07: INFO: TARGET SAID: 'INFO: program'
18:15:07: INFO: TARGET SAID: 'INFO: read'
18:15:07: INFO: TARGET SAID: 'INFO: nop'
18:15:07: INFO: TARGET SAID: 'INFO: patch'
18:15:07: INFO: TARGET SAID: 'INFO: configure'
18:15:07: INFO: TARGET SAID: 'INFO: setbootablestoragedrive'
18:15:07: INFO: TARGET SAID: 'INFO: erase'
18:15:07: INFO: TARGET SAID: 'INFO: power'
18:15:07: INFO: TARGET SAID: 'INFO: firmwarewrite'
18:15:07: INFO: TARGET SAID: 'INFO: getstorageinfo'
18:15:07: INFO: TARGET SAID: 'INFO: benchmark'
18:15:07: INFO: TARGET SAID: 'INFO: emmc'
18:15:07: INFO: TARGET SAID: 'INFO: ufs'
18:15:07: INFO: TARGET SAID: 'INFO: fixgpt'
18:15:07: INFO: TARGET SAID: 'INFO: End of supported functions 14'
18:15:07: INFO: TARGET SAID: 'INFO: Calling handler for configure'
18:15:07: INFO: TARGET SAID: 'INFO: Storage type set to value eMMC'
18:15:07: INFO: TARGET SAID: 'WARN: NAK: MaxPayloadSizeToTargetInBytes sent by host 1048576 larger than supported 16384'
18:15:07: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 16384
18:15:07: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 16384
18:15:07: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
Send RESET to target with DelayInSeconds="2" ? (y|n):y
18:15:10: INFO: Sending <power>
18:15:10: INFO: TARGET SAID: 'INFO: Calling handler for power'
18:15:10: INFO: ==============================================================
18:15:10: INFO: Files used and their paths
18:15:10: INFO: 1 'C:\Program Files (x86)\Qualcomm\QPST\bin\port_trace.txt'
18:15:10: INFO: 2 'C:\Program Files (x86)\Qualcomm\QPST\bin\reboot.xml'
18:15:10: INFO: _ (done)
18:15:10: INFO: | |
18:15:10: INFO: __| | ___ _ __ ___
18:15:10: INFO: / _` |/ _ \| '_ \ / _ \
18:15:10: INFO: | (_| | (_) | | | | __/
18:15:10: INFO: \__,_|\___/|_| |_|\___|
18:15:10: INFO: {All Finished Successfully}
18:15:10: INFO: Overall to target 2.922 seconds (0.00 Bps)
Writing log to 'C:\Program Files (x86)\Qualcomm\QPST\bin\port_trace.txt', might take a minute
Log is 'C:\Program Files (x86)\Qualcomm\QPST\bin\port_trace.txt'

Sudden Death of Black Screen

Dear Developers.
A year ago, my Wileyfox Swift device, which was turned off and connected to the cable to charge, did not turn on when I checked again.
On the grounds that the problem is not in the hardware, an attempt was made to install a rom on the phone with different software download systems, but it was unsuccessful.
Right now, when trying to install ROM on the phone, it gives the following error.
Code:
Programmer Path:<Maincode>\prog_emmc_firehose_8916.mbn
Start Download
Program Path:<Maincode>\prog_emmc_firehose_8916.mbn
***** Working Folder:<AppData>\Roaming\Qualcomm\QFIL\COMPORT_3
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: '<Program Files (x86)>\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: <AppData>\Roaming\Qualcomm\QFIL\COMPORT_3
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: <Maincode>\prog_emmc_firehose_8916.mbn
15:44:30: <Maincode>\prog_emmc_firehose_8916.mbn"
15:44:30: 85224 bytes transferred in 0.063000 seconds (1.2901MBps)
15:44:30: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
15:44:30: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:16384 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:<AppData>\Roaming\Qualcomm\QFIL\COMPORT_3
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
15:44:35: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
<Program Files (x86)>\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM3 --sendxml=rawprogram_unsparse.xml --search_path=<Maincode> --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
15:44:35: INFO: Current working dir (cwd): <AppData>\Roaming\Qualcomm\QFIL\COMPORT_3\
15:44:35: INFO: Showing network mappings to allow debugging
15:44:37: INFO:
15:44:37: INFO: Trying to store 'rawprogram_unsparse.xml' in string table
15:44:37: INFO: Looking for file 'rawprogram_unsparse.xml'
15:44:39: INFO: User wants to talk to port '\\.\COM3'
15:44:39: INFO: Took 0.00000000 seconds to open port
15:44:39: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
15:44:39: INFO: If you don't want this, use --dontsorttags
15:44:39: INFO: Looking for file 'sbl1.mbn'
15:44:39: INFO: Looking for file 'sbl1.mbn'
15:44:39: INFO: Looking for file 'emmc_appsboot.mbn'
15:44:39: INFO: Looking for file 'emmc_appsboot.mbn'
15:44:39: INFO: Looking for file 'rpm.mbn'
15:44:39: INFO: Looking for file 'rpm.mbn'
15:44:39: INFO: Looking for file 'tz.mbn'
15:44:39: INFO: Looking for file 'tz.mbn'
15:44:39: INFO: Looking for file 'hyp.mbn'
15:44:39: INFO: Looking for file 'hyp.mbn'
15:44:39: INFO: Looking for file 'devinfo.bin'
15:44:39: INFO: Looking for file 'dummy.bin'
15:44:39: INFO: Looking for file 'dummy.bin'
15:44:39: INFO: Looking for file 'misc.img'
15:44:39: INFO: Looking for file 'splash.img'
15:44:39: INFO: Looking for file 'oem_1.img'
15:44:40: INFO: Looking for file 'NON-HLOS.bin'
15:44:40: INFO: Looking for file 'fs_image.tar.gz.mbn.img'
15:44:40: INFO: Looking for file 'sec.dat'
15:44:40: INFO: Looking for file 'boot.img'
15:44:40: INFO: Looking for file 'system_1.img'
15:44:40: INFO: Looking for file 'system_2.img'
15:44:40: INFO: Looking for file 'system_3.img'
15:44:40: INFO: Looking for file 'system_4.img'
15:44:40: INFO: Looking for file 'system_5.img'
15:44:40: INFO: Looking for file 'system_6.img'
15:44:40: INFO: Looking for file 'system_7.img'
15:44:40: INFO: Looking for file 'system_8.img'
15:44:41: INFO: Looking for file 'system_9.img'
15:44:41: INFO: Looking for file 'system_10.img'
15:44:41: INFO: Looking for file 'system_11.img'
15:44:41: INFO: Looking for file 'system_12.img'
15:44:41: INFO: Looking for file 'system_13.img'
15:44:41: INFO: Looking for file 'system_14.img'
15:44:41: INFO: Looking for file 'system_15.img'
15:44:41: INFO: Looking for file 'system_16.img'
15:44:41: INFO: Looking for file 'system_17.img'
15:44:41: INFO: Looking for file 'system_18.img'
15:44:41: INFO: Looking for file 'system_19.img'
15:44:41: INFO: Looking for file 'system_20.img'
15:44:41: INFO: Looking for file 'system_21.img'
15:44:41: INFO: Looking for file 'recovery.img'
15:44:41: INFO: Looking for file 'persist_1.img'
15:44:41: INFO: Looking for file 'cache_1.img'
15:44:41: INFO: Looking for file 'cache_2.img'
15:44:41: INFO: Looking for file 'cache_3.img'
15:44:41: INFO: Looking for file 'cache_4.img'
15:44:41: INFO: Looking for file 'userdata_1.img'
15:44:42: INFO: Looking for file 'userdata_2.img'
15:44:42: INFO: Looking for file 'userdata_3.img'
15:44:42: INFO: Looking for file 'userdata_4.img'
15:44:42: INFO: Looking for file 'userdata_5.img'
15:44:42: INFO: Looking for file 'userdata_6.img'
15:44:42: INFO: Looking for file 'userdata_7.img'
15:44:42: INFO: Looking for file 'userdata_8.img'
15:44:42: INFO: Looking for file 'userdata_9.img'
15:44:42: INFO: Looking for file 'userdata_10.img'
15:44:42: INFO: Looking for file 'userdata_11.img'
15:44:42: INFO: Looking for file 'userdata_12.img'
15:44:42: INFO: Looking for file 'userdata_13.img'
15:44:42: INFO: Looking for file 'userdata_14.img'
15:44:42: INFO: Looking for file 'userdata_15.img'
15:44:42: INFO: Looking for file 'userdata_16.img'
15:44:42: INFO: Looking for file 'userdata_17.img'
15:44:42: INFO: Looking for file 'userdata_18.img'
15:44:42: INFO: Looking for file 'userdata_19.img'
15:44:42: INFO: Looking for file 'userdata_20.img'
15:44:42: INFO: Looking for file 'userdata_21.img'
15:44:42: INFO: Looking for file 'userdata_22.img'
15:44:42: INFO: Looking for file 'userdata_23.img'
15:44:42: INFO: Looking for file 'userdata_24.img'
15:44:42: INFO: Looking for file 'userdata_25.img'
15:44:42: INFO: Looking for file 'userdata_26.img'
15:44:42: INFO: Looking for file 'userdata_27.img'
15:44:42: INFO: Looking for file 'userdata_28.img'
15:44:42: INFO: Looking for file 'userdata_29.img'
15:44:42: INFO: Looking for file 'userdata_30.img'
15:44:42: INFO: Looking for file 'userdata_31.img'
15:44:42: INFO: Looking for file 'userdata_32.img'
15:44:42: INFO: Looking for file 'userdata_33.img'
15:44:42: INFO: Looking for file 'userdata_34.img'
15:44:42: INFO: Looking for file 'userdata_35.img'
15:44:42: INFO: Looking for file 'userdata_36.img'
15:44:42: INFO: Looking for file 'userdata_37.img'
15:44:42: INFO: Looking for file 'userdata_38.img'
15:44:42: INFO: Looking for file 'userdata_39.img'
15:44:42: INFO: Looking for file 'userdata_40.img'
15:44:42: INFO: Looking for file 'userdata_41.img'
15:44:42: INFO: Looking for file 'userdata_42.img'
15:44:42: INFO: Looking for file 'userdata_43.img'
15:44:42: INFO: Looking for file 'userdata_44.img'
15:44:42: INFO: Looking for file 'userdata_45.img'
15:44:42: INFO: Looking for file 'userdata_46.img'
15:44:42: INFO: Looking for file 'userdata_47.img'
15:44:42: INFO: Looking for file 'userdata_48.img'
15:44:42: INFO: Looking for file 'userdata_49.img'
15:44:43: INFO: Looking for file 'gpt_main0.bin'
15:44:43: INFO: Looking for file 'gpt_backup0.bin'
15:44:43: INFO:
Total to be tansferd with <program> or <read> is 673.85 MB
15:44:43: INFO: Sending <configure>
15:44:43: INFO: TARGET SAID: 'Host's payload to target size is too large'
15:44:43: INFO: TARGET SAID: '[email protected] [email protected]'
15:44:43: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 16384
15:44:43: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 16384
15:44:43: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
15:44:43: INFO: In handleProgram('sbl1.mbn')
15:44:43: INFO: Looking for file 'sbl1.mbn'
15:44:43: INFO: =======================================================
15:44:43: INFO: {<program> FILE: '<Maincode>\sbl1.mbn'}
15:44:43: INFO: {<program> (247.07 KB) 495 sectors needed at location 131072 on LUN 0}
15:44:43: INFO: =======================================================
15:44:43: INFO: TARGET SAID: '[email protected] [email protected]'
15:44:43: INFO: TARGET SAID: 'start 131072, num 495'
15:44:43: INFO: FILE ACCESS SLOW!! 247.50 KB in 0.015 seconds ( 16.11 MBps) --- Overall to target 0.047 seconds (5.14 MBps)
15:44:43: INFO: {percent files transferred 0.04%}
15:44:43: INFO: TARGET SAID: 'Write failed Sector 131072, Errno 14'
15:44:43: INFO: TARGET SAID: 'Finished sector address 131072'
Download Fail: FireHose Fail: FHLoader Fail: Process fail
Finish Download
Of course the device does not respond at all with key combinations. There is also no response on Get Flash Information from device with software other than Qualcomm Flash Image software.
Can you help on the subject? Thank you in advance!
***
Some useful information.
* Serial code and OEM Hash Pack Locks can readable.
* It gives No Storage Drive Number error in Partition Manager operation.
* Device shows itself as MSM8909.

Develop Bugs

welcome