USB debugging mode issue with several apps - Xiaomi Mi A2 Lite Questions & Answers

Sorry for my English.
There are a few apps where you are not allowed to use USB debugging mode while working with them (Fate/Grand Order, Fortnite, some banking apps, etc).
Two days ago I've run into a problem with Fate/Grand Order. I turned on the debug mode and after that turned it off. However, the app still throws an error about USB debugging. The support team said that I should contact my manufacturer. I've found a theme on Xiaomi forum (can't post a link because of anti-spam) about this problem. Some users with POCO F1 have this problem too.
The only solution is factory reset.
Does anyone have the same problem?

ArianEpsilon said:
Sorry for my English.
There are a few apps where you are not allowed to use USB debugging mode while working with them (Fate/Grand Order, Fortnite, some banking apps, etc).
Two days ago I've run into a problem with Fate/Grand Order. I turned on the debug mode and after that turned it off. However, the app still throws an error about USB debugging. The support team said that I should contact my manufacturer. I've found a theme on Xiaomi forum (can't post a link because of anti-spam) about this problem. Some users with POCO F1 have this problem too.
The only solution is factory reset.
Does anyone have the same problem?
Click to expand...
Click to collapse
clear apps data and reboot ?? plug cable in to pc and toggle the settings??

boe323 said:
clear apps data and reboot ?? plug cable in to pc and toggle the settings??
Click to expand...
Click to collapse
I've tried this but nothing helped. I flashed 10.0.3.0 ROM and now everything works perfectly even after enabling/disabling USB debugging mode.
My friend also has Mi A2 Lite so I asked him to check this bug. He installed the game (he was using ROM 10.0.3.0) and after turning on and off debug mode everything worked fine. Then I asked him to install new 10.0.4.0 firmware and check this bug again. He got USB debug error even after disabling USB debugging.
So new February patch makes unable to play some games (such as Fate/Grand Order, Fortnite and so on) where it's not allowed to use USB debugging.

ArianEpsilon said:
Sorry for my English.
There are a few apps where you are not allowed to use USB debugging mode while working with them (Fate/Grand Order, Fortnite, some banking apps, etc).
Two days ago I've run into a problem with Fate/Grand Order. I turned on the debug mode and after that turned it off. However, the app still throws an error about USB debugging. The support team said that I should contact my manufacturer. I've found a theme on Xiaomi forum (can't post a link because of anti-spam) about this problem. Some users with POCO F1 have this problem too.
The only solution is factory reset.
Does anyone have the same problem?
Click to expand...
Click to collapse
You need to disable developer options for fortnite to work!I'm pretty sure that the other apps also require you to disable developer options

gz26 said:
You need to disable developer options for fortnite to work!I'm pretty sure that the other apps also require you to disable developer options
Click to expand...
Click to collapse
I know, as I said earlier, it doesn't work. If you try to enable and disable USB debug for the first time on 10.0.4.0 you will get an error about USB debug.
On 10.0.3.0 everything works fine. Seems USB debugging in 10.0.4.0 firmware is kinda broken. All applications detect it as turned on.

ArianEpsilon said:
Sorry for my English.
There are a few apps where you are not allowed to use USB debugging mode while working with them (Fate/Grand Order, Fortnite, some banking apps, etc).
Two days ago I've run into a problem with Fate/Grand Order. I turned on the debug mode and after that turned it off. However, the app still throws an error about USB debugging. The support team said that I should contact my manufacturer. I've found a theme on Xiaomi forum (can't post a link because of anti-spam) about this problem. Some users with POCO F1 have this problem too.
The only solution is factory reset.
Does anyone have the same problem?
Click to expand...
Click to collapse
You can unable it in Dev options.
Btw you can't run Fortnite on Mi A2 Lite, check sys requirements for the game.

wynix black said:
You can unable it in Dev options.
Btw you can't run Fortnite on Mi A2 Lite, check sys requirements for the game.
Click to expand...
Click to collapse
If I disable it nothing will change. There is a bug in 10.0.4.0 firmware. USB debugging doesn't turn off completely. I'm sorry, but did you even read my message?

Ok, I know 3 people who have the same problem. Does anyone here have the same problem with 10.0.4.0?

Related

[Q] Cant access developer options.

Hi,
I have a very strange issue and I am hoping that someone has a solution to this problem.
The tablet SM-T705 came with Build number KOT49H.T705XXU1ANG2 out of the box and it is not upgradeable.
Recently I bought a samsung galaxy tab s t705, The first thing that I wanted to do is root my new toy.
Obviously the first step in the process is to enable USB Debugging but it is a no go !
Here is what I am doing:
Settings > General > About device , Then tap the Build number 7 times.
Once I got the message that the developer mode is now enabled, I go back to the General tab but the "Developer options" are nowhere to be found.
I installed Nova launcher and tried to crate a shortcut for for the "Developer options" but all it does is throw me to the General settings tab in the settings.
I tried to factory reset the device and repeat the process but not luck.
I even tried some apps that are just shortcuts for the Developer options but it didn't help.
Any suggestions ?
I really need root (cant stand all the bloatware).
Thank you for your help !
/
16k
16k said:
Hi,
I have a very strange issue and I am hoping that someone has a solution to this problem.
The tablet SM-T705 came with Build number KOT49H.T705XXU1ANG2 out of the box and it is not upgradeable.
Recently I bought a samsung galaxy tab s t705, The first thing that I wanted to do is root my new toy.
Obviously the first step in the process is to enable USB Debugging but it is a no go !
Here is what I am doing:
Settings > General > About device , Then tap the Build number 7 times.
Once I got the message that the developer mode is now enabled, I go back to the General tab but the "Developer options" are nowhere to be found.
I installed Nova launcher and tried to crate a shortcut for for the "Developer options" but all it does is throw me to the General settings tab in the settings.
I tried to factory reset the device and repeat the process but not luck.
I even tried some apps that are just shortcuts for the Developer options but it didn't help.
Any suggestions ?
I really need root (cant stand all the bloatware).
Thank you for your help !
/
16k
Click to expand...
Click to collapse
Your on an old firmware, so that means you'll need to upgrade. Download mode does not need usb debugging. Simply put your device in download mode, flash newer firmware with odin, then root with cfautoroot. USB debugging is only needed to connect to PC while device is on. Hope this helps!
Thank!
DUHAsianSKILLZ said:
Your on an old firmware, so that means you'll need to upgrade. Download mode does not need usb debugging. Simply put your device in download mode, flash newer firmware with odin, then root with cfautoroot. USB debugging is only needed to connect to PC while device is on. Hope this helps!
Click to expand...
Click to collapse
This is the latest version based on Samsung's website and I really need to get usb debug going (not only for root).
Thanks for the help.
Which region is the device?

Minor but Irritating - Can't set usb connection default to Media Transfer

Not much of a problem, as problems go, but I'm tired of manually changing "usb for charging only" to media transfer every time I connect to my PC. In Developer Options I've set the USB Configuration to MTP but it doesn't make any difference, I still get "charge only" when I connect. Have I missed a setting somewhere? Thanks--
Unfortunately this is how marshmallow is setup to run.
There is an xposed module, and 1-2 apps here and on playstore to help with this.
Darke5tShad0w said:
Unfortunately this is how marshmallow is setup to run.
There is an xposed module, and 1-2 apps here and on playstore to help with this.
Click to expand...
Click to collapse
Thanks for the tip to a simple fix. The xposed module is Use USB for Marshmallow by FemBlack; http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
Note that there is a procedure: the module doesn't change the USB mode, it only retains the mode you set. After installing and rebooting, my phone still showed "USB for charging" when I connected and I jumped to the conclusion that the module didn't work. But then I read the developer's post and discovered my error. Works great.

Weird brick(?), phone not fully responding - data recovery before hard reset

Hi,
I have stock Marshmallow on my LG G4 and it somehow just stopped responding. At the startup there is an "android.com.phone stopped working" popup. After clicking OK, it dissapears and the phone doesn't respond for any unlocking attempts. After triple tap, the "magnifying lense" works and thats basically it. Before performing a factory reset I would like to get my data(photos, videos, possibly messages) backed up. But after connecting USB cable it is connected with "Loading only" option. I can't change it to mass storage or MTP. The phone works in background, I can see once in a while new notifications about updating apps etc. I tried using Safety Mode, same things happen.
Is there a way to change USB option remotely or perform a reset without losing all data? Since I never used USB debugging on this phone, I assume it is disabled.
Thanks for any help.
Looter11 said:
Hi,
I have stock Marshmallow on my LG G4 and it somehow just stopped responding. At the startup there is an "android.com.phone stopped working" popup. After clicking OK, it dissapears and the phone doesn't respond for any unlocking attempts. After triple tap, the "magnifying lense" works and thats basically it. Before performing a factory reset I would like to get my data(photos, videos, possibly messages) backed up. But after connecting USB cable it is connected with "Loading only" option. I can't change it to mass storage or MTP. The phone works in background, I can see once in a while new notifications about updating apps etc. I tried using Safety Mode, same things happen.
Is there a way to change USB option remotely or perform a reset without losing all data? Since I never used USB debugging on this phone, I assume it is disabled.
Thanks for any help.
Click to expand...
Click to collapse
Check out steadfasterX's thread: [TUTORIAL][LOCKED][UNLOCKED][ANY G4] DLM Backup - Full backup within download mode! at https://forum.xda-developers.com/g4/help/tutorial-backup-download-mode-t3659223
Read the OP thoroughly and post any questions there for help. He has proven very helpful to a lot of members.
Note: it is more informative and helpful when you post your model # and the exact kdz version you've got installed when seeking help.

USB-Debugging mode

Dear Community,
I am currently unable to activate the USB debugging mode on my unrooted Samsung Galaxy S9.
I have activated the developer mode.
USB debugging has alywasy been enabled in the past.
Since I wanted to use Helium, I double-checked that it is activated . but it is not.
The option is grayed out and there is a message saying "USB-Edugging mode will start as soon as usb is connected (translated from german)".
No matter waht I tried, nothing worked out.
Can you please help me out?
Best regards
Bacardi Man
I've noticed on older Samsung devices that if OEM Unlock is enabled then that will grey out USB debugging. The fix was to disable OEM unlock and reboot. Of course, if you're waiting on the 7 day thing to root that may reset the timer. I'm not sure about that since root will never be an option on my US version.
Thank you for the hint, but OEM unlock isn't activated and has never been as I am using Secure Folder (Knox).
Any other suggestions?
Bacardi Man said:
Thank you for the hint, but OEM unlock isn't activated and has never been as I am using Secure Folder (Knox).
Any other suggestions?
Click to expand...
Click to collapse
Probably won't help but worth a shot clearing CACHE from recovery
*Detection* said:
Probably won't help but worth a shot clearing CACHE from recovery
Click to expand...
Click to collapse
Good idea, but that did not work out either.
Am I really the only person with that problem?
Bacardi Man said:
Good idea, but that did not work out either.
Am I really the only person with that problem?
Click to expand...
Click to collapse
Could it be because of knox secure folder?
Tel864 said:
Could it be because of knox secure folder?
Click to expand...
Click to collapse
Maybe, but wouldn't that be made official somewhere?
I never red about it.
Maybe too simple but in Developer Options>USB configuration do you have MTP selected?
Tel864 said:
Maybe too simple but in Developer Options>USB configuration do you have MTP selected?
Click to expand...
Click to collapse
Yes, MTP Mode is selected.
Bacardi Man said:
Maybe, but wouldn't that be made official somewhere?
I never red about it.
Click to expand...
Click to collapse
Looks like it is probably KNOX causing it
https://seap.samsung.com/content/why-usb-debugging-mode-disabled-knox
https://seap.samsung.com/forum-topic/can-i-use-usb-debugging-mode-device-running-knox
Solution 3: Use USB debugging mode on a device running KNOX (For Samsung )
By default, My KNOX and KNOX Premium (through CellWe EMM) disables USB debugging on a device when it creates a secure container.
IT admins KNOX Premium (through CellWe EMM) can later enable USB debugging mode through the Admin Portal: Simply select Policies > Mobile > Samsung KNOX Device Settings > Restrictions Settings > Permit USB debugging = Yes. On the device, you need to go to Android Settings, enable Developer options, then enable USB debugging. The exact steps vary depending on your Android version, as described in Using Hardware Devices.
If you are using My KNOX, you cannot enable USB debugging mode while the container is installed. Unfortunately, you have to root your device and uninstall 'My KNOX' (enter Knox, chose Knox settings app -> More Information -> unistall Knox.), then you will be able to turn on USB debugging mode.
https://www.syncios.com/android/fix-usb-debugging-grey-out.html

Xiaomi 5A (MDG6) - How to unlock without losing data. USB debugging off

Hello everyone.
I've been digging through forum to find a solution to my problem. I have forgotten lock screen pattern to Xiaomi 5A, I would keep on going and try to enter and remember which combination I used, but every attempt is followed by 4min lock up. I've stored there a password in a notepad which I must retrieve.
I have an access to MI account. USB debugging mode is off.
I've tried few things already.
Method 1#:
https://forum.xda-developers.com/t/...ing-android-password-pattern-face-pi.2620456/ - Doesn't work, as USB debugging mode is off.
To enable usb debugging I found one method. Using MI unlock software LINK to enable fast boot and then follow with the steps from above. However on MI UNLOCK I'm showing "After you unlock the device, it will become less secure. Your personal data may be leaked or lost.". Could any one confirm that this process won't wipe the data?
Method 2#:
Secret codes - none of them work.
*#*#6484#*#*
*#*#3646633#*#*
*#*#4636#*#*
Your help will be greatly appreciated and the right solution rewarded. Please let me know if you have any ideas how to access the phone.
Thanks!
unlock your device didnt erase your data
SzatanSzarlatan said:
Hello everyone.
I've been digging through forum to find a solution to my problem. I have forgotten lock screen pattern to Xiaomi 5A, I would keep on going and try to enter and remember which combination I used, but every attempt is followed by 4min lock up. I've stored there a password in a notepad which I must retrieve.
I have an access to MI account. USB debugging mode is off.
I've tried few things already.
Method 1#:
https://forum.xda-developers.com/t/...ing-android-password-pattern-face-pi.2620456/ - Doesn't work, as USB debugging mode is off.
To enable usb debugging I found one method. Using MI unlock software LINK to enable fast boot and then follow with the steps from above. However on MI UNLOCK I'm showing "After you unlock the device, it will become less secure. Your personal data may be leaked or lost.". Could any one confirm that this process won't wipe the data?
Method 2#:
Secret codes - none of them work.
*#*#6484#*#*
*#*#3646633#*#*
*#*#4636#*#*
Your help will be greatly appreciated and the right solution rewarded. Please let me know if you have any ideas how to access the phone.
Thanks!
Click to expand...
Click to collapse
Unlocking bootloader should erase your data

Categories

Resources