Develop Bugs

[Q] Volume Boost LG G3 D851-TMO?

I have tried the options listed with editing the mixer system file and before that, tried the increase volume app from the Play Store but nothing seems to work.. WHat is the best way to increase the volume for the speaker, headphones and bluetooth??? Please advise. Thanks!

Try flashing the file from this post, thats what I did
http://forum.xda-developers.com/showpost.php?p=54521461&postcount=91

tarroyo said:
Try flashing the file from this post, thats what I did
http://forum.xda-developers.com/showpost.php?p=54521461&postcount=91
Click to expand...
Click to collapse
Yup, that works nicely, but:
1. Dont forget to change permissions on file file, or youll go into bootloop (happened to me before)
2. Im still waiting for a BT volume tweak because i dont think the mixerpath tweak works with bluetooth.

emezrahi said:
Yup, that works nicely, but:
1. Dont forget to change permissions on file file, or youll go into bootloop (happened to me before)
2. Im still waiting for a BT volume tweak because i dont think the mixerpath tweak works with bluetooth.
Click to expand...
Click to collapse
No changes need to be made for this mod.

wwwwd83 said:
I have tried the options listed with editing the mixer system file and before that, tried the increase volume app from the Play Store but nothing seems to work.. WHat is the best way to increase the volume for the speaker, headphones and bluetooth??? Please advise. Thanks!
Click to expand...
Click to collapse
Try viper. It increases volume on speaker and headphones ??

Viper?
Still_living714 said:
Try viper. It increases volume on speaker and headphones ??
Click to expand...
Click to collapse
What is Viper? Where do I get it?

Viper enhances audio on speaker and headphones. Shoot me a pm with your email and I will send you the app
wwwwd83 said:
What is Viper? Where do I get it?
Click to expand...
Click to collapse

[Update]Redmi 1s:best speaker configuration,loudest and clearest sound

Update:The new Guide has been released check it out here [Guide][Ver.2][Project Crystal X Loud]Redmi 1s Best Speaker Configuration With Proof
[/COLOR][/SIZE]Note:you must be on a custom rom to make it work, like cyanogenmod,mokee rom,carbon rom,pac rom,PA rom,etc(doesnt work on MIUI based roms)
Getting much less sound on redmi 1s even on the full volume?
yeah thats the problem everyone facing with this device.
So here are my phone speaker configurations to get the the loudest and clearest sound out of it,
Screenshots also attached,
Steps to get clear Sound:
1)Download and install Viper4android FX on redmi 1s(download link for Viper4android FX)
2)after installing open the app,and when it asks to install driver,choose the high quality,dont choose the battery saving because you will not get good sound in it,and neither choose the super quality as it will increase your battery consumption.
3)reboot the device once.
4)open Viper4Android and configure it like this:
i)click on options>UI settings>Expert
ii)in Master Power tick the Enable option
iii)in Firequalizer tick the Enable option and select preset:ROCK
iv)in Convolver tick the Enable option and in Impulse Response select the "Sony Xperia Rev2 EQ 8.Treble boost.irs"(download link for Sony Xperia Rev2 EQ 8.Treble boost.irs convolver) (Mirror link)
v)in Speaker Optimization tick the Enable option.
thats it, now you will get the clearest sound,but wait you will not get the loudest sound now,we have to do some few steps more,
Steps to get Loud Sound:
1)download and install root browser on your redmi 1s from playstore.
2)open root browser,you will see etc folder(if not go to system folder then etc folder).\ open it.
3)find mixer_paths.xml and open it.
4)look for this line in the text'<ctl name="RX4 Digital Volume" value="84" />'
5)change the value from 84 to 94 and save it.
6)Reboot once.
Now you have the best speaker on the redmi 1s
Note:after reboot if you get no volume,play any music,open viper4android in Master control untick Enable option and retick it,worked like charm
If you got some better settings than me dont hesitate to reply
leave a thanks by pressing the :good: button,it doesnt cost you anything

good work u've shared ur configurations.. will try..

thanx
dixan43 said:
good work u've shared ur configurations.. will try..
Click to expand...
Click to collapse
I Hope you will like it

99? wont it damage the speakers?

Ummm No
Eziogamer said:
99? wont it damage the speakers?
Click to expand...
Click to collapse
No,it will not damage the speakers because the settings which i 've given you for Viper4Android will control the volume,try it,you will not regret it

Settings are very nice...thanks for sharing...
I have one problem that when i receive the call, the volume is too loud that the person sitting next to me can hear then voice of the person am talking to....is there any workaround?
This problem is not due to your settings. I am having this issue from day 1 on this s device after installing the latest cm11 build.
Thanks in advance is anyone can help....
Happy New Year....
Sent from my HM 1S using XDA Free mobile app

shail00 said:
Settings are very nice...thanks for sharing...
I have one problem that when i receive the call, the volume is too loud that the person sitting next to me can hear then voice of the person am talking to....is there any workaround?
This problem is not due to your settings. I am having this issue from day 1 on this s device after installing the latest cm11 build.
Thanks in advance is anyone can help....
Happy New Year....
Sent from my HM 1S using XDA Free mobile app
Click to expand...
Click to collapse
Hello, @shail00 maybe you should try some diferrent rom if this problem irritates you,you can try carbon rom which has all the features of cm11 rom and much more additional features,or else you can wait for android l rom on which developers are working right now as the kernel source is released for rexmi 1s we can expect a better rom(having no problems) from the developers

Treble boost.irs file is not beijg downloaded because box.com is down.can u plz share the mirror url?
Sent from my HM 1SW using XDA Free mobile app

Which sound mod is best for xiaomi redmi 1s? Dolby digital plus or viper4android with dolby mobile app?

dxsyrz said:
Which sound mod is best for xiaomi redmi 1s? Dolby digital plus or viper4android with dolby mobile app?
Click to expand...
Click to collapse
both are good, Viper4Android is very complicated to get the correct settings but it has the settings which you cant get in any other sound mods. you can get the Dolby digtal plus for ease.

shail00 said:
Treble boost.irs file is not beijg downloaded because box.com is down.can u plz share the mirror url?
Sent from my HM 1SW using XDA Free mobile app
Click to expand...
Click to collapse
Added Mediafire mirror link, also box.com is running now

not able to find mixer_path.xml
I am not able to find mixer_path.XML in root browser.
Kindly guide me

androidrb said:
I am not able to find mixer_path.XML in root browser.
Kindly guide me
Click to expand...
Click to collapse
Go to system folder then etc folder now find mixer_paths.xml. and yes, make sure that you are on a custom rom

Give link to official thread of viper4android......also have you got the right from the developer about creating mirror to his links??you must ask him before(xda rulez)and i do think he hasnt allowed any 1 to create a mirror to his links...so better ask the developer about it...it would be good for you and him(the respective developer)

initial steps result in good sound I.e. settings in viper
Initial viper settings good,but don't touch mixer settings. It messed.up my phone speaker sound. During call the sound bursts terribly.

ashfaqpulsar said:
Initial viper settings good,but don't touch mixer settings. It messed.up my phone speaker sound. During call the sound bursts terribly.
Click to expand...
Click to collapse
Hmmm , Thanx for the Suggestion

I wonder why sound quality is great in miui 6 rom???
Sent from my HM 1S using XDA Free mobile app

installed 2 viper
I have installed V4A FX and HiFi, then with some xml edit, better sound..
more clear..
thank you..

yoh_1210 said:
I have installed V4A FX and HiFi, then with some xml edit, better sound..
more clear..
thank you..
Click to expand...
Click to collapse
Your Welcome Bro

Dont Set the value from 84 to 99
If u go to 99 the speaker will be loud but the sound gets horrible

Sound Issues on Moto G6 Play

Recently purchased one and bar the sound issue I am pretty much happy with it
The problem with the sound is that it is so low! I used to have an Xperia which had decent sound - on this you need to put it to the maximum settings for it to be anything like reasonable (and that still is not great)
I was beginning to think I had a dodgy hand set, but a friend purchased one too and that is exactly the same. Or is it just unlucky to have two that are broke?
I downloaded Volume Booster GOODEV, which helps a little when playing videos / output and I have also messed about with the Dolby and graphic equalizer settings
Just surprised that no reviews mentioned this issue - which made me suspect I had a broken device until I also heard my friends.
Any recommendations / any work-rounds / fixes?
Many thanks'

If you have root you can try editing mixer_paths.xml and see if that helps. If the phone has Dolby then make sure to turn off Volume Leveling.
Sent from my Moto G6 Plus using Tapatalk

Xplorer4x4 said:
If you have root you can try editing mixer_paths.xml and see if that helps. If the phone has Dolby then make sure to turn off Volume Leveling.
Sent from my Moto G6 Plus using Tapatalk
Click to expand...
Click to collapse
Any idea which values to edit? I have a G6, which I assume will have the same values. I have previously edited the mixer_paths.xml on my Moto E4, but the G6 does not have the same values.

I had the same issue on my moto G6, I rooted the device and installed magisk. Then installed the Ainur Sauron module. It works so good you won't even believe it. There's no UI just install reboot and profit.

luvcustom said:
I had the same issue on my moto G6, I rooted the device and installed magisk. Then installed the Ainur Sauron module. It works so good you won't even believe it. There's no UI just install reboot and profit.
Click to expand...
Click to collapse
dont need to remove dolby or something before installation??

blowingoff said:
dont need to remove dolby or something before installation??
Click to expand...
Click to collapse
Not required. It only needs to be disabled. I'm pretty sure that you can remove it entirely though.

luvcustom said:
I had the same issue on my moto G6, I rooted the device and installed magisk. Then installed the Ainur Sauron module. It works so good you won't even believe it. There's no UI just install reboot and profit.
Click to expand...
Click to collapse
Spaceminer said:
Not required. It only needs to be disabled. I'm pretty sure that you can remove it entirely though.
Click to expand...
Click to collapse
yes u can remove it through file explorer

Question Any Dolby magisk module?

Anybody have any Dolby magisk module for pixel 6 and 6 pro?

liver20 said:
Anybody have any Dolby magisk module for pixel 6 and 6 pro?
Click to expand...
Click to collapse
I've been wondering this too. I've tried three different ones from searching, and all I've tried simply don't work on the 6 Pro.

Yes, JamesDSP works. You can find the thread here with the download. You need to install AML 4.0 then JamesDSP 4.2 in Magisk Manager than reboot and you'll have working Dolby.
https://forum.xda-developers.com/t/jamesdsp-audio-manager-mmt-ex.3607970/

ajsmsg78 said:
Yes, JamesDSP works. You can find the thread here with the download. You need to install AML 4.0 then JamesDSP 4.2 in Magisk Manager than reboot and you'll have working Dolby.
https://forum.xda-developers.com/t/jamesdsp-audio-manager-mmt-ex.3607970/
Click to expand...
Click to collapse
How's the quality for you?

I read about how HD needs to be disabled in developer options to get JamesDSP to function, wouldn't that kinda render the entire reason why you would go for a custom sound module in the first place, well, void?

Morgrain said:
I read about how HD needs to be disabled in developer options to get JamesDSP to function, wouldn't that kinda render the entire reason why you would go for a custom sound module in the first place, well, void?
Click to expand...
Click to collapse
I don't think I disabled anything in developer options.

intp.pisces said:
How's the quality for you?
Click to expand...
Click to collapse
It's slightly louder at +3db than stock at (anything higher and the speakers just get muddy) and you can set the stereo width, equalizer and a bunch of other things but I haven't messed with it with my Pixel buds yet.

Morgrain said:
I read about how HD needs to be disabled in developer options to get JamesDSP to function, wouldn't that kinda render the entire reason why you would go for a custom sound module in the first place, well, void?
Click to expand...
Click to collapse
Any idea where?

intp.pisces said:
Any idea where?
Click to expand...
Click to collapse
It was here, in this P6 Pro sub forum. Probably in the last 20 threads or so.

Morgrain said:
It was here, in this P6 Pro sub forum. Probably in the last 20 threads or so.
Click to expand...
Click to collapse
I read all the posts on this one and I don't see it?

This works:
[6.0-12.0][Magisk]Dolby Digital Plus[upd.20211005]
Dolby Digital Plus for 9.0-12.0 OS Need selinux permissive Hi. I present the mod Dolby Digital Plus (interface and functionality is the same as that of Dolby Atmos). Theoretically should work on OS 6.0-9.0. I checked only on Oreo and Pie...
forum.xda-developers.com

General Viper4Android - Pixel 6 Pro - how to? [Root/magisk only]

Hello there.
I've been trying to get Viper4Android to work and tried the most common solutions (none worked yet)
Android 12 (Viper4Android)
Has anyone managed to get Viper4Android working on the latest beta of Android 12? The usual methods don't work (makes sense, since its a new OS). Just curious. I like Android 12 so far, but might roll back to 11 if I can't get Viper going...
forum.xda-developers.com
-> manually edit /data/adb/modules/ViPER4AndroidFX/post-fs-data.sh didn't work
-> using the automatic editing via magisk module didn't work
-> trying to use JamesDSP/audio compatibility library in between reboots installed/deinstalled didn't work
I also tried the "newest" fix version from the v4a Telegram group.
Any time I use a pair of bluetooth headsets, the options menu just states "abnormal" and v4a doesn't work.
Strangely enough, if I use the phone speakers and have NO bluetooth headset enabled, the processing works normally.
Anyone found a solution yet?
I plan to use this thread as a discussion first and once we found a viable solution that can be reproduced, I will edit this post to a guide. In the following spoiler I'll progressively add more information that will later replace the main text.
Disclaimer: The following requires root level access and knowledge in order to get a functioning audio mod working. I am not responsible for you bricking your device. Always tinker with your devices carefully.
Official v4a XDA Thread
[APP][ALL ROOT SOLUTIONS][6.0+]ViPER4Android FX 2.7
ViPER4Android FX By pittvandewitt and MrWhite214 Introduction Many users are enhancing their smartphone audio experience with the popular ViPER4Android software, but some of us have a hard time installing the driver or they don't like the look...
forum.xda-developers.com
1. Purpose
This guide serves as an installation method to get Android4Viper working on a Google Pixel 6 Pro (as of 12/2021). If not stated explicitly otherwise, do not assume that this method will work on another Android 12 device.
2. Installation method
3. Download
Viper4Android cannot be downloaded via xdalabs anymore. The installer (old 2020 version) can be either found here https://zackptg5.com/android.php#viper or as a magisk module in the new unofficial repo via Fox's Magisk Manager Module https://github.com/Fox2Code/FoxMagiskModuleManager (John abandonded the official Magisk Repo as of 12/2021).
4. Now that I have Viper4Android running... where do I find the right settings for my specific pair of headphones?
For a baseline, you can visit the GitHub page of the project AutoEQ and find the settings that fit your need https://github.com/jaakkopasanen/AutoEq/tree/master/results/crinacle
There is a general thread for Viper4Android profiles that are being shared by the community (sometimes with attached DDC & Convolver files) https://forum.xda-developers.com/t/read-op-first-official-viper4android-audio-profiles.2324454/
For a generic IRS file ("DDC") you can visit this website https://github.com/Codejune/viper4android-eq/tree/master/Kernel
If you want a specific DDC file tailored to your headphone, there are several XDA threads to chose from, where members of this community take the time and effort it takes to create those - usually these files are sold, you can expect about ~ 3€ per headphone IRS file pack. There are some floating around github or other parts of the net, but those are not always "official" and might have been shared without consent of the original creator. One creator of these files that offers them for free can be found here https://forum.xda-developers.com/t/...filters-2016-06-05-5-new-hifi-models.2372750/
For a Convolver file you can also search for them in several XDA threads (usually for free, DDC files are usually the ones being sold) - for example:
Collection of Convolver Samples (Around 390) For Viper4Android
As most of you guys must be using Viper4android so i will be posting a huge collection (Around 390) of Convolver Samples for Viper4android.. What is Impulse Response Sample (IRS)? When an IRS is loaded, V4A will process the sound to show the...
forum.xda-developers.com
5. My device bootloops after installing a magisk module (fix)
Most bootloops caused by a magisk module can be solved via safemode boot (automatically disables magisk modules).
Click to expand...
Click to collapse

Placeholder for future purposes

Morgrain said:
Hello there.
I've been trying to get Viper4Android to work and tried the most common solutions (none worked yet)
Android 12 (Viper4Android)
Has anyone managed to get Viper4Android working on the latest beta of Android 12? The usual methods don't work (makes sense, since its a new OS). Just curious. I like Android 12 so far, but might roll back to 11 if I can't get Viper going...
forum.xda-developers.com
-> manually edit /data/adb/modules/ViPER4AndroidFX/post-fs-data.sh didn't work
-> using the automatic editing via magisk module didn't work
-> trying to use JamesDSP/audio compatibility library in between reboots installed/deinstalled didn't work
I also tried the "newest" fix version from the v4a Telegram group.
Any time I use a pair of bluetooth headsets, the options menu just states "abnormal" and v4a doesn't work.
Strangely enough, if I use the phone speakers and have NO bluetooth headset enabled, the processing works normally.
Anyone found a solution yet?
I plan to use this thread as a discussion first and once we found a viable solution that can be reproduced, I will edit this post to a guide. In the following spoiler I'll progressively add more information that will later replace the main text.
Click to expand...
Click to collapse
Do you have HD audio option in Developer settings under Bluetooth enabled? If so, try turning it off.

Lughnasadh said:
Do you have HD audio option in Developer settings under Bluetooth enabled? If so, try turning it off.
Click to expand...
Click to collapse
I just tried it out and deactivated HD audio. Now it works! Marvelous! Thank you.
But... now I don't have LDAC anymore, that kinda defeats the purpose of v4a, since I want maximum music quality (I've been using both the Sony WF-XM4 (earbuds) and "normal" XM4 (NC headphones), both which rely on LDAC. Is there another workaround? Or a way to force LDAC even though the option is deactivated?

Morgrain said:
I just tried it out and deactivated HD audio. Now it works! Marvelous! Thank you.
But... now I don't have LDAC anymore, that kinda defeats the purpose of v4a, since I want maximum music quality (I've been using both the Sony WF-XM4 (earbuds) and "normal" XM4 (NC headphones), both which rely on LDAC. Is there another workaround? Or a way to force LDAC even though the option is deactivated?
Click to expand...
Click to collapse
I don't know of a workaround for that, sorry.

Alright, so I narrowed it down a bit.
The problem are both the bitrate and samplerate.
The maximum that this V4A fix currently supports is
48kHz <- down from 96 kHz
32bits/sample <- remains
330kbps <- down from 990kbps
That is still a step up from SBC (44.1Khz 16bit) - ergo if I tune that down in developer options, I can still use LDAC, even though with a reduced bitrate. I should mention that I also installed the Audio Modification Library and Ainur Narsil prior to my most previous attempt to get LDAC working, so that might be of importance.

If you search i believe in the apps section of P6P i post a thread on the correct app of Viper to use and a patch flashed in Magisk...

Here ya go?
1) flash Viper file, but dont open
2) Flash Patch File, but dont reboot
3) Open Viper, flash drivers let it reboot

AndroidAddict420 said:
Here ya go?
1) flash Viper file, but dont open
2) Flash Patch File, but dont reboot
3) Open Viper, flash drivers let it reboot
Click to expand...
Click to collapse
I took a look at your second file and that's the exact same post-fs-data.sh edit that I've already talked about in the OP post. I guess your method is the same, even though you have linked a handy app instead of manual editing (credits go to Typhus_ I guess)
I did not use any ViperFX "fix" version though. Can you confirm that your version supports high quality codec/more than 48 Khz/330kbps?

Morgrain said:
I took a look at your second file and that's the exact same post-fs-data.sh edit that I've already talked about in the OP post. I guess your method is the same, even though you have linked a handy app instead of manual editing (credits go to Typhus_ I guess)
I did not use any ViperFX "fix" version though. Can you confirm that your version supports high quality codec/more than 48 Khz/330kbps?
Click to expand...
Click to collapse
Yea, i take no credit for the work, just the find. SEARCH does wonders kid Android 12 (Viper4Android)

Viper 2.7.2.1 is working fine for me on my 6pro. I have zero problems with it.
Steps I took:
rickysidhu_ said:
These are the steps I used on my OnePlus 9 and they worked on my 6 Pro as well. Didn't need to mess with any post fs stuff:
1. Install Ainur Narsil in Magisk
2. Install AML in Magisk
3. Install V4A
4. Reboot and should be good (if not, continue to step 5)
5. Disable AML in Magisk (don't uninstall, just disable) and reboot
6. Re-enable AML, reboot and now you should be good
Click to expand...
Click to collapse
I have the latest canary magisk, latest December patch.

Why not simply using wavelet?

Utini said:
Why not simply using wavelet?
Click to expand...
Click to collapse
It's the difference between night and day... apples vs bananas... nuclear warheads vs bricks... kidding.
Wavelet is a glorified Equalizer, whilst Viper4Android is in a class of its own, enabling enthusiasts to go above and beyond to get the best music quality possible by using
- custom tailored DDCs for your specific headphone (you can ez buy headset correction IRS' in certain Telegram groups, make your own or have luck finding ones...)
- Custom tailored Convolvers (personally I'd suggest to give TubeAmplifier & Technics Preamp Extreme v.2 a first try to get a baseline, and then try out others to see if it fits your headphone pair better)
- Decent dynamic & bass system
- Clarity settings, auditory protection, et cetera...
V4A can turn a pair of headphones into a stellar object of beauty, whilst Wavelet will simply elevate your experience by ~20%.
If you can, try it out. The experience (IF ! you tailor it properly) is extraordinary. I'd also always suggest to get the best possible results by tailoring your settings according to your headset, e.g. get a baseline with
AutoEq/results/crinacle at master · jaakkopasanen/AutoEq
Automatic headphone equalization from frequency responses - AutoEq/results/crinacle at master · jaakkopasanen/AutoEq
github.com

fil3s said:
Viper 2.7.2.1 is working fine for me on my 6pro. I have zero problems with it.
Steps I took:
[...]
I have the latest canary magisk, latest December patch.
Click to expand...
Click to collapse
Can you confirm that this method (without manually editing any files) enables high quality Codecs/bitrate?
It's still relatively unclear if this is a Android 12 thing, a Pixel 6 problem or if it's caused by Viper4Android. What is clear is that it was possible in the past (I had three Pixels, was never an issue) to use high quality codecs (LDAC) with full bandwidth, meaning
Samplerate of 96.0 kHz
32 bits/sample
990kbps (the latter will probably never work, since the P6 has a bit of bluetooth connection problems, meaning after 660 the phone will only produce noise/can't get a solid connection - hopefully Google can fix this)

Morgrain said:
It's the difference between night and day... apples vs bananas... nuclear warheads vs bricks... kidding.
Wavelet is a glorified Equalizer, whilst Viper4Android is in a class of its own, enabling enthusiasts to go above and beyond to get the best music quality possible by using
- custom tailored DDCs for your specific headphone (you can ez buy headset correction IRS' in certain Telegram groups, make your own or have luck finding ones...)
- Custom tailored Convolvers (personally I'd suggest to give TubeAmplifier & Technics Preamp Extreme v.2 a first try to get a baseline, and then try out others to see if it fits your headphone pair better)
- Decent dynamic & bass system
- Clarity settings, auditory protection, et cetera...
V4A can turn a pair of headphones into a stellar object of beauty, whilst Wavelet will simply elevate your experience by ~20%.
If you can, try it out. The experience (IF ! you tailor it properly) is extraordinary. I'd also always suggest to get the best possible results by tailoring your settings according to your headset, e.g. get a baseline with
AutoEq/results/crinacle at master · jaakkopasanen/AutoEq
Automatic headphone equalization from frequency responses - AutoEq/results/crinacle at master · jaakkopasanen/AutoEq
github.com
Click to expand...
Click to collapse
Tbh I only used V4A to apply custom made .irs profiles from oratory1990. Same can be done in wavelet. Nothing more needed for my Sennheiser HD800S, HD600 and Momentum 3.
But yes, V4A has tons of more options. I just never needed those.
What I miss in wavelet are automatic profile switches based on output (speaker,bluetooth,cable).

Morgrain said:
Can you confirm that this method (without manually editing any files) enables high quality Codecs/bitrate?
It's still relatively unclear if this is a Android 12 thing, a Pixel 6 problem or if it's caused by Viper4Android. What is clear is that it was possible in the past (I had three Pixels, was never an issue) to use high quality codecs (LDAC) with full bandwidth, meaning
Samplerate of 96.0 kHz
32 bits/sample
990kbps (the latter will probably never work, since the P6 has a bit of bluetooth connection problems, meaning after 660 the phone will only produce noise/can't get a solid connection - hopefully Google can fix this)
Click to expand...
Click to collapse
Idk man it works fine for me for the most part. I can confirm that Bluetooth randomly drops out about once a day, although, I had probs with the with the stock EQ as well, like the preset would just 'cut out'
It's definitely a lot better than stock. Bass is good. No complaints here
Edit. Disregard this post. Thanks

Morgrain said:
I just tried it out and deactivated HD audio. Now it works! Marvelous! Thank you.
But... now I don't have LDAC anymore, that kinda defeats the purpose of v4a, since I want maximum music quality (I've been using both the Sony WF-XM4 (earbuds) and "normal" XM4 (NC headphones), both which rely on LDAC. Is there another workaround? Or a way to force LDAC even though the option is deactivated?
Click to expand...
Click to collapse
I just did some testing with my Pixel Buds A-series and I have V4A working via Bluetooth (as well as JamesDSP) with HD audio enabled. I am able to choose my Codec (which the best for my buds are AAC, unfortunately. No LDAC support). However, I do have ACP installed. That may be why it's working with HD audio enabled. Might want to give it a try.
I have V4A, JamesDSP, AML & ACP installed.
When installing ACP, I chose these options:
1. Skip audio_policy patching?=Yes
2. Skip notification_helper remover?=Yes
3. Skip usb policy patching for usb dacs?=No
4. Use lib workaround?=No
Maybe this will help...

? for everyone who has it "working":
a) do you have to enable legacy?
and if not
b) is it stable, or does the status go to abnormal after X number of songs, etc?
I've tried every method out there and since Android 10 I haven't gotten V4A to work consistently without enabling legacy, and I don't want keep beating my head against the wall if legacy mode is the only stable option.

Roll3r said:
? for everyone who has it "working":
a) do you have to enable compatibility?
and if not
b) is it stable, or does the status go to abnormal after X number of songs, etc?
I've tried every method out there and since Android 10 I haven't gotten V4A to work consistently without enabling compatability
Click to expand...
Click to collapse
a) No (but have to enable Legacy Mode)
b) Yes it is stable

Lughnasadh said:
a) No (but have to enable Legacy Mode)
b) Yes it is stable
Click to expand...
Click to collapse
Thanks. Edited my post to add Legacy.