[KERNEL+][Q][PIE][Treble][Nethunter][Andrax] - Lenovo ZUK Z2 (Plus) ROMs, Kernels, Recoveries, &

[KERNEL+][Q][PIE][Treble][Nethunter][Andrax] - Lenovo ZUK Z2 (Plus) ROMs, Kernels, Recoveries, &

A project by Offensive Security
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs.
AN ALTERNATIVE TO NETHUNTER
ANDRAX - A project by Weidsom Nascimento of The Cracker Technology - Advanced Pentest
ANDRAX is a penetration testing platform developed specifically for Android smartphones, ANDRAX has the ability to run natively on Android so it behaves like a common Linux distribution, But more powerful than a common distribution!
The development of ANDRAX began on 08/09/2016 (DD/MM/YYYY) only for people in Brazil.
ANDRAX has been fully redefined and reloaded on 05/10/2018 (DD/MM/YYYY) open to the international public.
ANDRAX enable to all Android device with root access enabled and a good unlocked rom become a weapon for advanced Penetration Testing.
Downloads:
For Android PIE:
[url]https://sourceforge.net/projects/nethunterkernel-z2plus-pie/files/[/URL]
For Android Q:
https://sourceforge.net/projects/nethunter-andrax-android-10/files/
GUIDE:1.Simply flash it through TWRP ,clear cache and reboot
It will take around 10-15 mins to boot..
2.For the rest guide on how to install nethunter and all ,you can easily find it on google
OR
Refer to:[url]https://forum.xda-developers.com/lenovo-zuk-z2/development/kernel-kali-nethunter-t3813746[/URL]
IF ANYONE FACES TWRP "ERROR 1" WHILE FLASHING THE ZIP FILE
Flash this TWRP(V 3.2.3) by kubersharma and flash the zip
NOTE: This TWRP is only for those ROM users who have mounted /vendor as /factory partition.
If you do not belong in this category ,simply flash vendor to factory.zip and then flash this twrp.
https://www.androidfilehost.com/?fid=11410963190603913223
Disclaimer:
This Kernel was tested only on Arrow OS 9.0 ROM only.***It works "ALMOST" almost on any ROM now.***
"I WONT BE RESPONSIBLE FOR ANY BRICKED,DAMAGED PHONES ETC. FLASH IT AT YOUR OWN RISK.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY MISUSE OF THIS KERNEL. THIS KERNEL IS TOTALLY MEANT FOR SECURITY PENTESTING."
WHATS WORKING?Wifi Injection and monitor mode
Bugs:1.HID (because currently there is no patch available for 4.4.X Kernel.So anyone interested to create the patch message me)
2.You tell me.
Credits:Offensive Security, Andrax
@Atharva Ambre[AT]
@faizauthar12
@kenny3fcb
@kubersharma
@frap129(For spectrum support)
#teamfirangi(Bubblewrap)
XDAevDB Information
Kali Nethunter, Kernel for the Lenovo ZUK Z2 (Plus)
Source Code:https://github.com/theimprobableoneATSH/nethunter
Source Code(Bubblewrap):
[url]https://github.com/theimprobableoneATSH/kernel_bubblewrap_4.4[/URL]
For Android 10:-
Source Code:https://github.com/VarshankDhiman/kernel_zuk_msm8996
Status: Stable
Beta Release Date: 2019-02-26
Latest release: 2020-04-26
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Initial Release:
-Test build : Have enabled Wifi modules for Ralink,Realtek and Atheros(partial support for ath9k_htc based chipset based i.e. monitor mode works problems faced during injecting packets)
V2 Release:
-Fixed Atheros(ath9k_htc based) partial support. Now it works completely fine with atheros chipset based cards
Eg: Tp link 722N.
-USB Modem -CDC ACM support is available for Proxmark and Similar devices
V3 Release:
-Updated to latest CAF kernel version 4.4.176 for the latest Arrow build.
-Bug fixes.
-Improved Stability

Reserved pt.2

Due to various changes in new version of kernel 4.4.X , the kernel might not work as expected or you may face bugs.Be sure to report it!

Finally Nethunter is back to life. Thank You Dev for this update. Make this kernel as stable as BubbleWrap. :good: By the way, zuk z2's internal wifi adaptor work in monitor mode or I have to use evternal wifi adaptor?

ChetanLokhande said:
Finally Nethunter is back to life. Thank You Dev for this update. Make this kernel as stable as BubbleWrap. :good: By the way, zuk z2's internal wifi adaptor work in monitor mode or I have to use evternal wifi adaptor?
Click to expand...
Click to collapse
External adapter
Internal is not supported.
Yes the next update will be available maybe by this weekend which might fix all the major issues.

Could you push repo with commit history?

Star_king12 said:
Could you push repo with commit history?
Click to expand...
Click to collapse
Yes my apologies. I didnt had any commit history i will add it shortly

hey! I'm not into this nethunter thing but i want to start, can anyone help me where can I start because I want to use this kernel!

Installation stuck when trying to install nethunter apk. Kernel installs and boots

Artap~ said:
Installation stuck when trying to install nethunter apk. Kernel installs and boots
Click to expand...
Click to collapse
You should flash this through Magisk Manager not TWRP
Under modules section and add this zip file and reboot.

Atharva Ambre[AT said:
;79011418]You should flash this through Magisk Manager not TWRP
Under modules section and add this zip file and reboot.
Click to expand...
Click to collapse
Ok ty so much

the_harsh said:
hey! I'm not into this nethunter thing but i want to start, can anyone help me where can I start because I want to use this kernel!
Click to expand...
Click to collapse
First learn linux basic commands and how to use it , become familiar with the linux OS and CLI (Debian is a good start or maybe ubuntu)then u try to learn kali linux and its tools. This kernel will help only with wifi pentesting. But u must first how to use it..
Pro tip: Dont use this kernel for any bad purpose. I and Offensive Security do not take any responsibility for any misuse . It comes with absolutely no warranty. So any misuse willl be treated as illegal. Its absolutely for security pentesting.

#Build 2 is up!
https://sourceforge.net/projects/nethunterkernel-z2plus-pie/files/
Changelog is present in post #1

Atharva Ambre[AT said:
;79016363]First learn linux basic commands and how to use it , become familiar with the linux OS and CLI (Debian is a good start or maybe ubuntu)then u try to learn kali linux and its tools. This kernel will help only with wifi pentesting. But u must first how to use it..
Pro tip: Dont use this kernel for any bad purpose. I and Offensive Security do not take any responsibility for any misuse . It comes with absolutely no warranty. So any misuse willl be treated as illegal. Its absolutely for security pentesting.
Click to expand...
Click to collapse
aye captain ! no harm will be caused to anyone. it's only for education purposes. I'll use it for penetration testing of my WiFi only! ?
---------- Post added at 06:13 AM ---------- Previous post was at 05:49 AM ----------
one guide on how to uninstall it completely would also help alot!

Atharva Ambre[AT said:
;79016407]#Build 2 is up!
https://sourceforge.net/projects/nethunterkernel-z2plus-pie/files/
Changelog is present in post #1
Click to expand...
Click to collapse
Fking love this project.

Deleted

the_harsh said:
aye captain ! no harm will be caused to anyone. it's only for education purposes. I'll use it for penetration testing of my WiFi only! ?
---------- Post added at 06:13 AM ---------- Previous post was at 05:49 AM ----------
one guide on how to uninstall it completely would also help alot!
Click to expand...
Click to collapse
Uninstall what kernel or Kali nethunter?
If u r speaking of kernel simply extract the boot.img from ur ROM zip
And den boot into twrp and select Install Image and den flash it under boot section.
Also make sure to resintall the Magisk if u r gonna need root back again(since it reverts all the changes)
Or else simply clear cache and boot

I would like the kernel testers out there for their feedback!
Any bug report etc..

Atharva Ambre[AT said:
;79021175]Uninstall what kernel or Kali nethunter?
If u r speaking of kernel simply extract the boot.img from ur ROM zip
And den boot into twrp and select Install Image and den flash it under boot section.
Also make sure to resintall the Magisk if u r gonna need root back again(since it reverts all the changes)
Or else simply clear cache and boot
Click to expand...
Click to collapse
Dirty flashing rom won't work?
BTW spectrum is working for me. I can change profiles and all, not sure how. Im on pixys and came from bubble wrap.

Related

[chroot] [kernel] [ honami ] Kali NetHunter MM

Development and support discontinued!
NetHunter - Mobile Penetration Testing Platform
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

A project by Offensive Security
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-security/kali-nethunter/wiki.
Is Kali NetHunter an Android ROM?
Kali Linux NetHunter is not a ROM but is meant to be installed over an existing stock/factory image of Android. It can also be installed over some Cyanogenmod based ROMs depending on device support. It is heavily based on using custom kernels and only supports a select number of devices. We're relying on you, the community, to port your devices for the full Kali NetHunter experience.
Supported configuration
This flashable zip includes a special Sony AOSP kernel.
It should work on every Marshmallow AOSP ROM like Cyanogenmod but I have only tested it at my AICP ROM.
Disclaimer
Do not use your mobile without permission at foreign WiFi networks or hack other people. This is illegal in most countries and you can be punished for cybercrime!
I am not responsible for everything what you do with your phone which has NetHunter installed and I am not responsible if you disregard the laws of your country. You have been warned!
Download
Download link all builds: https://androidfilehost.com/?w=files&flid=53793
Downlad link last build: https://www.androidfilehost.com/?fid=24499762635999120
XDA:DevDB Information
Kali NetHunter, Tool/Utility for the Sony Xperia Z1
Contributors
be_mler_
Source Code: https://github.com/be-mler/kali-nethunter
Version Information
Status: Testing
Current Beta Version: 1.0
Created 2016-04-08
Last Updated 2016-04-08

Thank you so much! I have been really looking forward to a port of this rom!

aquaboy11 said:
Thank you so much! I have been really looking forward to a port of this rom!
Click to expand...
Click to collapse
If there is enough interest, I can port it to all other Xperia Z devices.
PS: This is not a ROM. It's a full Kali Linux which shares the file system an the Kernel with your Android ROM.

be_mler_ said:
If there is enough interest, I can port it to all other Xperia Z devices.
PS: This is not a ROM. It's a full Kali Linux which shares the file system an the Kernel with your Android ROM.
Click to expand...
Click to collapse
That's for marshmallow..
If i want to install this on Stock 5.1 lollipop ?

UltraWelfare said:
That's for marshmallow..
If i want to install this on Stock 5.1 lollipop ?
Click to expand...
Click to collapse
You will stuck at bootloop or your device does nothing. Maybe you'll brick it I don't know. Or maybe it even works *lol*
Read -> Think -> Think again -> Don't post questions about Stock ROM in AOSP threads!

be_mler_ said:
You will stuck at bootloop or your device does nothing. Maybe you'll brick it I don't know. Or maybe it even works *lol*
Read -> Think -> Think again -> Don't post questions about Stock ROM in AOSP threads!
Click to expand...
Click to collapse
I know it will boot loop it, I was just asking in an indirect way if you could build it ...

Would that work on the Z1Compact?

be_mler_ said:
If there is enough interest, I can port it to all other Xperia Z devices.
PS: This is not a ROM. It's a full Kali Linux which shares the file system an the Kernel with your Android ROM.
Click to expand...
Click to collapse
I know, but still . AICP installs just fine, but when I try to flash nethunter over it I keep getting "error executing updater binary in zip".

puit said:
Would that work on the Z1Compact?
Click to expand...
Click to collapse
Nope, cause the Z1c has a slightly different Kernel.

Plz Port It To Xperia Z2 ..

First of all guys must check or device's wlan card support moniter mode or not....if not its use gets significantly low......however u can check that by cmd: "airmon-ng start wlan0" by normally installing and command window ...if its supported then gud lck ur gtg
Sent from my ASUS_Z00A using Tapatalk

New Build
Kernel Bugfixes:
DriveDroid compatibility patch
Kernel additions needed by some Kali tools:
FHANDLE
EXPORTFS
DEVTMPFS, DEVTMPFS_MOUNT
Kernel additions I found useful:
Filesystem support: NTFS, NFS, CIFS
Governor: SmartassH3
https://www.androidfilehost.com/?fid=24499762635998652

Sakya_sanjay said:
First of all guys must check or device's wlan card support moniter mode or not....if not its use gets significantly low......however u can check that by cmd: "airmon-ng start wlan0" by normally installing and command window ...if its supported then gud lck ur gtg
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Other than BCM4329 and BCM4330 no other internal wireless cards in Android devices support native monitor mode, that's a known fact. The OS supports monitor mode for EXTERNAL wireless cards only, and this is easily understood if you read their documentation. I don't understand the point of your post. The OS has many more useful features than just WiFi penetration.
Sent from my Xperia Z1 (AOSP) using XDA Labs

New Build
https://www.androidfilehost.com/?fid=24499762635999120
If at last/this build the speaker while phone call isn't working just delete or rename system/etc/acdbdata and reboot device

it would be amazing if you port for xperia z2 (D6503) please!

i'd been waiting this for along time,
can u port it to xperia yuga please,
or just write a guide to port it please,
i still don't understand the guide at guthub and offsec page,
i've a xperia yuga with multirom installed

Working great with Resurrection Remix MM Rom...... :good:

B!Gguy said:
Working great with Resurrection Remix MM Rom...... :good:
Click to expand...
Click to collapse
Can you please tell me if there are any bugs??
Sent from my Xperia Z1 using XDA-Developers mobile app

please make for kitkat
please make for kitkat stockroom, because my phone is z1 au version, it stuck on kitkat 4.4.2

Xperia Z2 pleaseeeee

KaliLinux NetHunter v1.0 [Kali v2.0/Backtrack 5][athene]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Kali NetHunter is an Android ROM overlay that includes a robust Mobile Penetration Testing Platform. The overlay includes a custom kernel, a Kali Linux chroot, and an accompanying Android application, which allows for easier interaction with various security tools and attacks. Beyond the penetration testing tools arsenal within Kali Linux, NetHunter also supports several additional classes, such as HID Keyboard Attacks, BadUSB attacks, [URL="https://github.com/offensive-security/kali-nethunter/wiki/NetHunter-Mana-Wireless"]Evil AP MANA attacks[/URL], and much more. For more information about the moving parts that make up NetHunter, check out our NetHunter Components page. NetHunter is an open-source project developed by Offensive Security and the community.
FIRST THINGS FIRST, SERIOUSLY:
Your warranty was void as soon as you unlocked your bootloader.
Although Kali Nethunter should be safe to use, I am not responsible for whatever happens to your device, router, or whatever networking infrastructure because of YOU misusing the available facilities of Kali.
Remember that while Kali can be absolutely safe, if you handle root access improperly, no one will help you.
Make sure you read all of the info here and have some basic knowledge about networking, kernels and Linux/Unix.
Even if you're able to find a vulnerability on a different host (often called victim) , don't misuse the advantage you have.
Report the issue to the device's owner and the OEM. Do not complain if the attacks aren't working. Security has been ramping up ever since the wikileaks incident and the Edward Snowden thing.
FEATURES:
Kali NetHunter Application
Home Screen - General information panel, network interfaces and HID device status.
Kali Chroot Manager - For managing chroot metapackage installations.
Check App Update - For checking Kali NetHunter Android App updates.
Kali Services - Start / stop various chrooted services. Enable or disable them at boot time.
Custom Commands - Add your own custom commands and functions to the launcher.
MAC Changer - Change your Wi-Fi MAC address (only on certain devices)
VNC Manager - Set up an instant VNC session with your Kali chroot.
HID Attacks - Various HID attacks, Teensy style.
DuckHunter HID - Rubber Ducky style HID attacks
BadUSB MITM Attack - Nuff said.
MANA Wireless Toolkit - Setup a malicious Access Point at the click of a button.
MITM Framework - Inject binary backdoors into downloaded executables on the fly.
NMap Scan - Quick Nmap scanner interface.
Metasploit Payload Generator - Generating Metasploit payloads on the fly.
Searchsploit - Easy searching for exploits in the Exploit-DB.
3rd Party Android Applications (WIP)
NetHunter Terminal Application
DriveDroid
USB Keyboard
Shodan
Router Keygen
cSploit
Remember that there might be many other exploits and attack features available online, the ones mentioned above are officially documented by Kali. Secondly, not much support will be possible regarding the attacking since not everyone will have the same opportunities.
DOWNLOADS
Sourceforge might show this file as Malware for obvious reasons, but open the filename and choose the directlink. I will contact their support team for this soon, meanwhile you can also check the Android File Host mirror.
1. For N Custom ROMs :
Sourceforge folder
Android Filehost
2. For stock N:
3. For MM Custom ROMs:
4. For Stock MM:
INSTALLATION
IMPORTANT NOTE: Kali NetHunter is NOT an Android ROM, but it is an overlay ( you have to flash it above android).
The builds currently provided are to be used on Nougat based custom ROMs ONLY. (which use the LineageOS kernel)
Installing it on a ROM which uses the LineageOS 14.1 kernel. (examples include all of our N custom ROMs like Lineage, AEX, AICP, AOKP, DU ) :
1. Make sure you are running the latest available build of the ROM you have installed.
2. Reboot to TWRP.
3. Make sure you backup Boot, System and Data partitions, just incase you want to remove Kali, you can restore it.
3. Wipe Cache and ART Cache (Formerly known as Dalvik Cache). Do NOT wipe your data partition.
4. Install the zip file.
5. Reboot to System.
POST INSTALLATION:
1. Open the NetHunter App and start the Kali Chroot Manager.
2. You might want to download the real packages which might be around 400-500 MB in size.
3. Set up Hacker Keyboard.
4. Configure Kali Services, such as SSH.
5. Set up custom commands.
6. Initialize the Exploit Database.
BUGS:
Please read the help thread before you point out issues here. It has been created specifically to help new users to adapt to custom roms easier. Before you post your issue, please check if it has already been reported and if a fix has already been mentioned.
SCREENSHOTS:
https://vimeo.com/132329259
https://youtu.be/yV6AzqgdBo4
IMPORTANT LINKS:
1. My build of TWRP
2. KaliLinux NetHunter Github Wiki
3. KaliLinux NetHunter Website
4. Source for athene: https://github.com/tywinlannister7/nethunter-devices
XDA:DevDB Information
KaliNethunter for athene, ROM for the Moto G4 Plus
Contributors
tywinlannister7 @keerten
Source Code: https://github.com/offensive-security/kali-nethunter
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest stock Nougat firmware
Version Information
Status: Stable
Created 2017-07-20
Last Updated 2017-07-20

Reserved

Reserved

Will it work on AOSP CAF?

aravindmj said:
Will it work on AOSP CAF?
Click to expand...
Click to collapse
It uses the LineageOS kernel, so YES. :good:

First off thank you for this second how do we add HID devices to kali

khaoticking said:
First off thank you for this second how do we add HID devices to kali
Click to expand...
Click to collapse
You're welcome.
The NetHunter HID Atacks turn any device and its OTG USB cable into a pre-programmed keyboard, able to type any given commands. HID here refers to the Human Interface Devices like your keyboard mouse touchpad etc. The mounting process should be similar like you do on any android device. If you're not sure that kali isn't detecting the device, you might want to try running this command in the terminal:
Code:
lsusb

tywinlannister7 said:
You're welcome.
The NetHunter HID Atacks turn any device and its OTG USB cable into a pre-programmed keyboard, able to type any given commands. HID here refers to the Human Interface Devices like your keyboard mouse touchpad etc. The mounting process should be similar like you do on any android device. If you're not sure that kali isn't detecting the device, you might want to try running this command in the terminal:
Click to expand...
Click to collapse
Kali doesn't detect any HID devices when trying to run the hello world duck script it won't type anything

Can you give me the link to the kernel sources...

khaoticking said:
First off thank you for this second how do we add HID devices to kali
Click to expand...
Click to collapse
The Android HID patch as mentioned by pelya has not been applied to the kernel sources. That's why there is no HID Interfaces...
If anybody knows how to custom compile a kernel then one can look at @pelya guide how to patch it..
Link to kernel source of tywinlannister https://github.com/tywinlannister7/elementalx_kernel_motorola_msm8952
Link to patched kernel sources Jleeblanch but it is not compiling he is the official maintainer of Resurrection remix for Athene "the Kali branch"
https://github.com/Jleeblanch/android_kernel_motorola_msm8952
If anybody looks into the matter we can get fully functional Kali nethunter...
Thanks in advance..:good:

Does it work on Moto g4 plus and how to remove the Kali overlay latter. Thanks

Sobhan Bhuyan said:
Does it work on Moto g4 plus and how to remove the Kali overlay latter. Thanks
Click to expand...
Click to collapse
This is in the G4 Plus forum. That usually means it works on the G4 Plus.

zeomal said:
This is in the G4 Plus forum. That usually means it works on the G4 Plus.
Click to expand...
Click to collapse
I flashed it and got an error in twrp ( named error one or something) and then there were no overlays to be seen inside. Later I knew that caller ID is not visible while calling or being called. Restored then. Pls advice. Should I flash again.

Managed to get the error message from twrp. Pls advice

Sobhan Bhuyan said:
Managed to get the error message from twrp. Pls advice
Click to expand...
Click to collapse
As it says in the TWRP error, did you boot and set up your device, then reboot to flash the Kali overlay? From the opening post, this appears to flash over existing custom ROMs.
What ROM are you attempting to flash Kali over?

Sobhan Bhuyan said:
Managed to get the error message from twrp. Pls advice
Click to expand...
Click to collapse
First of all a ROM must be installed and on top of that only nethunter should be flashed(so only it is called overlay ROM ,something has to be underneath it...:good: )

echo92 said:
As it says in the TWRP error, did you boot and set up your device, then reboot to flash the Kali overlay? From the opening post, this appears to flash over existing custom ROMs.
What ROM are you attempting to flash Kali over?
Click to expand...
Click to collapse
I m currently on ressurection remix ROM ,device XT1643
So you mean that after wiping cache I must set up device as new first then reboot and flash the overlay. Ok I will try and let you know

Sorry to bother, but what about ElementalEx kernel? Is it compatible, untested, or uncompatible?
Also, does it need a fresh ROM flash, or could it be used over an already flashed, rooted and used ROM with EX ?

Will it work for Viper OS 7.1 nougat?

What is the difference between this version and version 3.0?
'

[Z00L/T] [KERNEL LESS] Kali NetHunter - Mobile Penetration Testing Platform

A project by Offensive Security
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Kali NetHunter is an Android penetration testing platform targeted towards Nexus and OnePlus devices built on top of Kali Linux, which includes some special and unique features. Of course, you have all the usual Kali tools in NetHunter as well as the ability to get a full VNC session from your phone to a graphical Kali chroot, however the strength of NetHunter does not end there. We've incorporated some amazing features into the NetHunter OS which are both powerful and unique. From pre-programmed HID Keyboard (Teensy) attacks, to BadUSB Man In The Middle attacks, to one-click MANA Evil Access Point setups, access to the Offensive Security Exploit Database... And yes, NetHunter natively supports wireless 802.11 frame injection with a variety of supported USB NICs.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at: https://github.com/offensive-securit...nethunter/wiki.
List of included attack tools: [url]https://github.com/offensive-securit...s-and-features[/URL]
Is Kali NetHunter an Android ROM?
Kali Linux NetHunter is not a ROM but is meant to be installed over an existing stock/factory image of Android. It can also be installed over some Cyanogenmod based ROMs depending on device support. It is heavily based on using custom kernels and only supports a select number of devices. We're relying on you, the community, to port your devices for the full Kali NetHunter experience.
Bugs
1. Terminal crashes every time [See workaround]
2. Terminal doesn't opens up in Kali[See workaround]
3. cSploit crashes while updating core. [Need confirmation]
Downloads
Z00L :-
Marshmallow
Nougat
Z00T :-
Marshmallow
Nougat
Uninstaller for both Z00L & Z00T
Installation Instructions
1. Download the ZIP as per system.
2. Reboot into recovery and flash the zip.
3. It will take time. Wait for it to complete and then reboot system.
4. After system boots, open NetHunter app from drawer and grant permissions and root access. [Takes time]
5. Now on NetHunter app, slide drawer and select Chroot manager. Here you can download type of chroot you want. Minimal or full. Minimal will take 2 GB space and Full will take 5 GB approx. Download as you wish.
6. Done.
Screenshots
See Screenshots tab.:laugh:
Workaround
1. After Installation and initial setup, uninstall the preloaded terminal and install the terminal from the downloads tab. It will now open and stop crashing.
2. For opening terminal in Kali, open the terminal and select "Kali" now type "exit" [Without Quotes]. Terminal will open in [email protected]:laugh:
Tips
1. If you are having problems with root access, use SuperSu.
2. After booting up as [email protected] in terminal don't forget to hit "apt-get update" and "apt-get upgrade" [Without Quotes].
Support Development
[url]https://www.paypal.me/AayushGupta[/URL]
XDA:DevDB Information
Kali NetHunter - Mobile Penetration Testing Platform, Tool/Utility for the Zenfone 2 Laser
Contributors
aayushgupta219, madScript
Source Code: [url]https://github.com/TheImpulse/kali-nethunter[/URL]
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-08-07
Created 2017-07-24
Last Updated 2017-08-07
XDA:DevDB Information
[Z00L/T] [KERNEL LESS] Kali NetHunter - Mobile Penetration Testing Platform, ROM for the Zenfone 2 Laser
Contributors
Impulse
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2017-08-20
Last Updated 2017-09-07

Reserved
Reserved

Reserved

Great! waiting for ss. Will try soon. Hope no major bugs

kunalchitara said:
Great! waiting for ss. Will try soon. Hope no major bugs
Click to expand...
Click to collapse
Screenshots are already added and Bugs and workaround is mentioned too.

Good work... alwayz wanted to have this ROM on ZOOL....

aadi50 said:
Good work... alwayz wanted to have this ROM on ZOOL....
Click to expand...
Click to collapse
This is not a rom i think... Check OP

[email protected]@t said:
This is not a rom i think... Check OP
Click to expand...
Click to collapse
yeah it isnt ROM... whatever this is mobile penetration testing platform

Good job!! Dev I was waiting for this penetration testing platform on zool for a long time, finally you made it.

sunilpolavarapu said:
Good job!! Dev I was waiting for this penetration testing platform on zool for a long time, finally you made it.
Click to expand...
Click to collapse
Update will be made to crush bugs soon!

aayushgupta219 said:
Update will be made to crush bugs soon!
Click to expand...
Click to collapse
For Z00T please. On other post by fab the zip is not found.

ndrancs said:
For Z00T please. On other post by fab the zip is not found.
Click to expand...
Click to collapse
I will look if I can.

If someone is interested in sending me the hardware info and Kernel of Z00T, to build Kali Nethunter for Z00T, PM me the files.

Great job...the minimal chroot version installed and worked perfectly ...but full chroot unable to install ...ran out of memory ...so how can I install full chroot on my device .

joshi_1996 said:
Great job...the minimal chroot version installed and worked perfectly ...but full chroot unable to install ...ran out of memory ...so how can I install full chroot on my device .
Click to expand...
Click to collapse
Format sdcard as system partition and link it via link2sd or format sdcard as internal memory and try then. Use a high speed memory card. I use class 10 32 gb card.

aayushgupta219 said:
If someone is interested in sending me the hardware info and Kernel of Z00T, to build Kali Nethunter for Z00T, PM me the files.
Click to expand...
Click to collapse
I checked your github repo. Why you fork from cyanogenmod? Instead of Los? Just asking

ndrancs said:
I checked your github repo. Why you fork from cyanogenmod? Instead of Los? Just asking
Click to expand...
Click to collapse
Because @LuK1337 keeps files updated. I want to use Asus repo but they haven't updated it to nougat and most users are on nougat now. Also his Lineage is base for almost all other ROM's. I am currently testing the new builds. It will be available to download by the end of the week.

Impulse said:
Because @LuK1337 keeps files updated. I want to use Asus repo but they haven't updated it to nougat and most users are on nougat now. Also his Lineage is base for almost all other ROM's. I am currently testing the new builds. It will be available to download by the end of the week.
Click to expand...
Click to collapse
Thanks.
Did you mean this weekend?

ndrancs said:
Thanks.
Did you mean this weekend?
Click to expand...
Click to collapse
Today!

New Builds Up. Old users stay on old build. Z00T users test and report. Don't report known bugs. I will fix known bugs in next update. Custom Kernel will be added in next update for both users that will fix almost all bugs and will allow all features of Kali to work. Pre chrooted builds are now removed, manually download chroot now.

[EOL][KERNEL] [G93xx][2019-05-25] WirusMOD [Nethunter for Oreo]

End of Life WirusMOD Nethunter Kernel for Oreo ROMs
Samsung Galaxy S7 / Edge
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is for herolte. If you have S7 Edge go here
FEATURES:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Most features of TGPKernel
Supported ROMs:
S7 Stock O ROMs - G930F / G930FD / G930W8 / G935F / G935FD / G935W8
S7 Hybrid O ROMs (G930F/G935F) - The Galaxy Project (TGP), Ambasadii S7, SilverRom, etc
S9 Port ROMs
N8 Oreo Port ROMs
Download:
Latest version Herolte here.
Installation:
1. Flash latest TWRP twrp-3.3.0-1+ ( to see data partition with enabled disk quota)
1. TWRP Backup your ROM
3. Flash Nethunter WirusMOD
4. Magisk and busybox is needed you can choose in aroma or install it later.
5. Install Magisk Nethunter module from Magisk Manager -> Downloads (Or another version of Nethunter)
If you get crashes in Magisk Nethunter app than install from here.
6. Install kalifs-armhf-*.tar.xz by Nethunter manager
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
Now you have Nethunter on your herolte/hero2lte.
EXTRA:
1.In Utilities.7z are wifi testing tools binaries like aircrack-ng compiled from source of nexmon (Not needed for Nethunter only for test tools direct from android without Nethunter)
If you want use binaries you need to copy it to /system/bin or /system/xbin and give permissions to it rwxr-xr-x
2. DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
Old Installation steps:
1. TWRP Backup your ROM
2. Flash Nethunter.WirusMOD.G93xx.vx.x.XXXXXXXX.zip
2.1.Look at EXTRA.
3. Busybox is needed you can choose in aroma or install another version.
6. Install Magisk Nethunter module from Magisk Manager -> Downloads (Or another version of Nethunter)
If you get crashes in Magisk Nethunter app than install this version.
7. Install kalifs-armhf-*.tar.xz by Nethunter manager
8. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
9. Download Modules for your version of smartphone and copy it anywhere in your phone.
By using modules you can add features to kernel for which i hadn't memory in kernel and aren't most important like rarely used wifi card modules or file systems modules. Load only those which you need.
You can use modules by those commands insmod, rmmod, lsmod or use Module Loader this app is outdated but works fine.
Now you have Nethunter on your herolte/hero2lte.
EXTRA:
If you want to have unencrypted data partition:
1. Format data partition(you lose your data).
2 Flash Kernel with option NO ROOT
2. After flashing kernel flash "remove encryption.zip".
3. Reboot to system (First start configuration wizard).
4. Reboot to twrp and flash Magisk.
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
djb77 for his TGPkernel source
Nethunter creators for the best portable penetration testing tool.
XDA:DevDB Information
[KERNEL][G93xx][2019-05-25] WirusMOD [Nethunter for Oreo], Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-WirusMOD-Oreo
Kernel Special Features: Powered by TGPKernel
Version Information
Status: Testing
Created 2019-02-09
Last Updated 2019-06-22

CHANGELOG
2019.09.27- v1.4
Upstream to tgpkernel source Version 6.15.2[EOL]
2019.06.22- v1.3
Update source to TGPKernel Version 6.15.0
2019.05.25 - v1.2
Updated TGPkernel source to v6.14.0 (release from 2019-05-23)
Rebased source, removed loadable modules
Ramdisk compressed with xz to get more free space for drivers.
Little fixes in defconfig
2019-04-20 - v1.1
Added monitor mode patches to some wifi usb drivers.
Added possibility to disable HIDPatch (this fixes DriveDroid)
Added HIDPatchSwitch: Simple sh script to switch status of HIDPatch (Info in comments in script)
Updated TGP source to Version 6.12.8
2019-02-09 - v1.0
Initial release.

Reserved

What's different between 2 of your kali net hunter or wiresmod nethunter

I'm not sure if this is related but could this help me with the 5 GHz Wi-Fi disconnects on my phone every 10 minutes from the AP?
No other device has this issue for me, only this phone and I tried changing channels already, they all drop exactly at 10 minutes and I've given the phone permanent local IP, no lease time.
On the other hand 2.4 GHz is rock solid.

shabbir143 said:
What's different between 2 of your kali net hunter or wiresmod nethunter
Click to expand...
Click to collapse
This WirusMOD Nethunter is based on TGPKernel so it have features of TGPKernel too. Normal Nethunter is based on Stock Kernel.
GlossGhost said:
I'm not sure if this is related but could this help me with the 5 GHz Wi-Fi disconnects on my phone every 10 minutes from the AP?
No other device has this issue for me, only this phone and I tried changing channels already, they all drop exactly at 10 minutes and I've given the phone permanent local IP, no lease time.
On the other hand 2.4 GHz is rock solid.
Click to expand...
Click to collapse
No, this kernel can't help you for disconnects.

I'm going to buy a usb wifi dongle with an AR9271. By connecting it, I can use it in monitoring mode and send deauthentication packets. I understand correctly?

_Danil_ said:
I'm going to buy a usb wifi dongle with an AR9271. By connecting it, I can use it in monitoring mode and send deauthentication packets. I understand correctly?
Click to expand...
Click to collapse
Yes. You can do all what you can do in normal Kali Linux. Only you need to have htc_9271.fw in /system/etc/firmware/ in your android. ( It is included in Nethunter_Binaries.7z)

Hi! First of all, thanks a lot for your amazing job!
I'm trying to get my usb adapter tp-link tl-wn821n and I couldnt... I've installed the drivers from the tplink website, some drivers from this link and others sources with no success... any idea how to make it work?
Thanks!

maty25 said:
Hi! First of all, thanks a lot for your amazing job!
I'm trying to get my usb adapter tp-link tl-wn821n and I couldnt... I've installed the drivers from the tplink website, some drivers from this link and others sources with no success... any idea how to make it work?
Thanks!
Click to expand...
Click to collapse
I don't know which version of tp-link tl-wn821n you have. I heard that v1 - v3 are on atheros chipset. Next versions are on RTL8192.... and i don't know about compatibility v4+ versions with kali linux.
Looking at source code of which you used. I think you have v4+ so first you need to insmod modules RTL8192 than you need copy firmware.
In NetHunter_Binaries.7z are firmwares for RTL8192... in \system\etc\firmware\rtlwifi\ extract all of they direct in \system\etc\firmware
I think that android might not load drivers which are in extra folders in \system\etc\firmware\
All those things you need to do in Android not in Kali chroot.
If you have problems with inserting modules than try my kernel for Oreo Stock it have no modules, all are included in kernel. With this kernel you need only copy firmware.
My TGP based kernel is too big to have all modules included.

Svirusx said:
I don't know which version of tp-link tl-wn821n you have. I heard that v1 - v3 are on atheros chipset. Next versions are on RTL8192.... and i don't know about compatibility v4+ versions with kali linux.
Looking at source code of which you used. I think you have v4+ so first you need to insmod modules RTL8192 than you need copy firmware.
In NetHunter_Binaries.7z are firmwares for RTL8192... in \system\etc\firmware\rtlwifi\ extract all of they direct in \system\etc\firmware
I think that android might not load drivers which are in extra folders in \system\etc\firmware\
All those things you need to do in Android not in Kali chroot.
If you have problems with inserting modules than try my kernel for Oreo Stock it have no modules, all are included in kernel. With this kernel you need only copy firmware.
My TGP based kernel is too big to have all modules included.
Click to expand...
Click to collapse
Thanks for the info! I've tried to copy the files from the "rtlwifi" folder to the firmware folder but when I reboot the phone they get deleted :/ I supossed I'll try with an stock version... thanks!

maty25 said:
Thanks for the info! I've tried to copy the files from the "rtlwifi" folder to the firmware folder but when I reboot the phone they get deleted :/ I supossed I'll try with an stock version... thanks!
Click to expand...
Click to collapse
In my old phone i used this path /vendor/firmware maybe it can working for you.
I had too this problem but with copying to system/xbin. Solved by copying those files to system/bin

I just want to ask, can't hold my self.
Will it work on latest rr with android 9.x ?

SomniusX said:
I just want to ask, can't hold my self.
Will it work on latest rr with android 9.x ?
Click to expand...
Click to collapse
No, it's only for Oreo

Svirusx said:
No, it's only for Oreo
Click to expand...
Click to collapse
Yeah, figures.. just had one hope

Can you update to the latest version of TGP?
Also, what modules are included in the kernel?

_Danil_ said:
Can you update to the latest version of TGP?
Also, what modules are included in the kernel?
Click to expand...
Click to collapse
All what is in FEATURES is included, if you want look at all included in kernel modules you need to look at defconfig in kernel source.
When i get free time i try update it.

Sometimes the smartphone reboot itself. In a random time, with various actions. Sometimes in a couple of hours there can be 4 restarts.
Firmware: latest THE GALAXY PROJECT
But nethunter works fine, monitoring, injections and even interception of PMKID ?

_Danil_ said:
Sometimes the smartphone reboot itself. In a random time, with various actions. Sometimes in a couple of hours there can be 4 restarts.
Firmware: latest THE GALAXY PROJECT
But nethunter works fine, monitoring, injections and even interception of PMKID
Click to expand...
Click to collapse
Maybe try LineageOS 14.1 version this one is more stable than STOCK one. I switched to LineageOS 15.1. Later i going to publicate my new port of Nethunter kernel for LineageOS 15.1 and now i'm testing LineageOS 16.0 build which is not yet stable.

@Svirusx It may be to early to ask this, but do you have any plans to port either this or just bethunter to stock pie? https://www.google.com/amp/s/forum....t/blackdiamondfesmooth-fastv1-0-t3915483/amp/

[KERNEL][A51] NDataX Kernel for Samsung Galaxy A51 [STOCK/CUSTOM]

Reserved - Changelog

News & other.
09-02-2021: Since samsung release Android 11 source along wity OneUI 3 (will world-wide soon), NDataX will support Android 1 as well as Android 10. But, Android 10 support will EOL (end of life) when OneUI 3 is already world-wide. Why? It's difficult to maintain 2 Android version support, because we don't know what Samsung do & changes in each source.
17-02-2021: My source will be reworked. This means these current source URL will dead, or fully different. Don't worry, I'll of course link it later

Thank you for kernel.Whats antutu score

Fatih27 said:
Thank you for kernel.Whats antutu score
Click to expand...
Click to collapse
I didn't check it. It should better but not far from stock since I depends the stability for now

I need help, after flashing this onto my A51, it won't get out of the bootscreen
I'm not sure if I did something wrong but I followed all steps.

Shawny16k said:
I need help, after flashing this onto my A51, it won't get out of the bootscreen
I'm not sure if I did something wrong but I followed all steps.
Click to expand...
Click to collapse
Hi sir, sorry for making you got bootloop. What ROM you in? GSI or OneUI? Also if OneUI, which version. Thanks

hendramanu said:
Hi sir, sorry for making you got bootloop. What ROM you in? GSI or OneUI? Also if OneUI, which version. Thanks
Click to expand...
Click to collapse
OneUI 2.5, It's Android 10 TPA not sure why I'm having this issue

Shawny16k said:
OneUI 2.5, It's Android 10 TPA not sure why I'm having this issue
Click to expand...
Click to collapse
actually I think I fixed the issue, I formatted and it finally passed the boot screen, I'll let you know if anything else occurs.

Shawny16k said:
actually I think I fixed the issue, I formatted and it finally passed the boot screen, I'll let you know if anything else occurs.
Click to expand...
Click to collapse
Great to see you fix it. But format data solution is hard to do on some user, because they may keep important data and not able to backup.
Do you remove the encryption after flashing TWRP before? With formatting data & flashing DM Verity disabler. When encryption is removed then TWRP should not error of unable to mount /data

hendramanu said:
Great to see you fix it. But format data solution is hard to do on some user, because they may keep important data and not able to backup.
Do you remove the encryption after flashing TWRP before? With formatting data & flashing DM Verity disabler. When encryption is removed then TWRP should not error of unable to mount /data
Click to expand...
Click to collapse
I don't have much important data in this phone plus I've formatted this phone a lot cause of the random reboot issue I had and no I never had encryption.

Shawny16k said:
I don't have much important data in this phone plus I've formatted this phone a lot cause of the random reboot issue I had and no I never had encryption.
Click to expand...
Click to collapse
Okay sir. Thank you for using my kernel. Any problem you face?

hendramanu said:
Okay sir. Thank you for using my kernel. Any problem you face?
Click to expand...
Click to collapse
not as of yet, seems to be working fine

Will this work with other GSIs such as Pixel 2 android 11 Gsi from erfan, because I'm getting boot loop in almost all of them except phh_treble GSIs which are quite buggy

GrandmaGotGuns said:
Will this work with other GSIs such as Pixel 2 android 11 Gsi from erfan, because I'm getting boot loop in almost all of them except phh_treble GSIs which are quite buggy
Click to expand...
Click to collapse
Tested in RR GSI. It works fine. So it should work fine for other GSIs
Also what do you mean for bootloop? My kernel or GSI? Thanks!

hendramanu said:
Tested in RR GSI. It works fine. So it should work fine for other GSIs
Also what do you mean for bootloop? My kernel or GSI? Thanks!
Click to expand...
Click to collapse
Its Probably the GSI, cause OEMs do not release the source code so its a nightmare to patch em

GrandmaGotGuns said:
Its Probably the GSI, cause OEMs do not release the source code so its a nightmare to patch em
Click to expand...
Click to collapse
Do you use Android 11 firmware as base? I mean you maybe update to OneUI 3 and then flash GSI?

hendramanu said:
Do you use Android 11 firmware as base? I mean you maybe update to OneUI 3 and then flash GSI?
Click to expand...
Click to collapse
No I Didn't but tried the same thing from Lineage OS 18.1 and AOSP android 11

GrandmaGotGuns said:
No I Didn't but tried the same thing from Lineage OS 18.1 and AOSP android 11
Click to expand...
Click to collapse
No, I mean when you in stock do you update it to OneUI 3.0 (Android 11)? Or flash Android 11 firmware via odin before GSI?

Though I know that I need to change kernel's behavior from enforcing to permissive and for that I flashed Permissiver v5 but still the Boot loop

Develop Bugs

welcome