Develop Bugs

Unrevoked problems with Linux x86_64 (SOLVED)

Hi all,
I was trying to root with unrEVOked 3.1 on a 64bit Ubuntu installation and hit this problem and found a solution so I thought I'd post it up here to help any other newbies like me
Problem (running from terminal)
Code:
unrEVOked recovery reflash tool
git 7bb95e5
/usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
/usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiogconf.so
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
I assume the problem is that reflash is 32 bit and my libs are 64, so install
frozenfox.freehostia.com/cappy/getlibs-all.deb
then
Code:
getlibs libgioremote-volume-monitor.so
This will install the 32 libs / gvfs and reflash is happy.

not solved for me
Unfortunately, this doesn't solve the problem for me:
Code:
[email protected]:~/Downloads$ sudo ./reflash
unrEVOked recovery reflash tool
git version: 4f78f67
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
ERROR: n = -1, errno = 19 (No such device)
ERROR: n = -1, errno = 19 (No such device)
ERROR: n = -1, errno = 19 (No such device)
ERROR: n = -1, errno = 19 (No such device)
This was my first attempt. unrevoked reported "done" in the end, but it didn't work. Now I followed your suggestion:
Code:
[email protected]:~/Downloads$ getlibs libgioremote-volume-monitor.so
libgioremote-volume-monitor.so: gvfs
The following i386 packages will be installed:
gvfs
Continue [Y/n]? y
Downloading ...
Installing libraries ...
[email protected]:~/Downloads$ sudo ./reflash
unrEVOked recovery reflash tool
git version: 4f78f67
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
ERROR: n = -1, errno = 19 (No such device)
ERROR: n = -1, errno = 19 (No such device)
ERROR: n = -1, errno = 19 (No such device)
ERROR: n = -1, errno = 19 (No such device)
Same error messages. And again it didn't work although unrevoked reported "done".
This is on Ubuntu 10.04 64bit. Any help appreciated.

Sorry, apparently it DID work. Titanium Backup was reporting a failure with root access, but that was down to a not-working BusyBox. Titanium downloaded an alternative, crashed with force close on restart but after a second restart it worked.
So potentially the first rooting without the 32bit libraries might have worked as well?

need to:
Code:
sudo apt-get install lib32ncurses5 libgtk2.0-0 ia32-libs-gtk

SensationXL port

I did a port rcmix 2.1 (because 2.2 have 2 rosie i think its mean so much ram needed) anyway smooth and everything working without mobile network (no signal) and settings is not include mobile data i forgot something but what is it Any ideas?
Code:
21:37:06.544 Error TundConnector 1430 Communications error
21:37:06.544 Error TundConnector 1430 java.io.IOException: No such file or directory
21:37:06.544 Error TundConnector 1430 at android.net.LocalSocketImpl.connectLocal(Native Method)
21:37:06.544 Error TundConnector 1430 at android.net.LocalSocketImpl.connect(LocalSocketImpl.java)
21:37:06.544 Error TundConnector 1430 at android.net.LocalSocket.connect(LocalSocket.java)
21:37:06.544 Error TundConnector 1430 at com.android.server.NativeDaemonConnector.listenToSocket(NativeDaemonConnector.java)
21:37:06.544 Error TundConnector 1430 at com.android.server.NativeDaemonConnector.run(NativeDaemonConnector.java)
21:37:06.544 Error TundConnector 1430 at java.lang.Thread.run(Thread.java:1027)
21:37:06.544 Warning TundConnector 1430 Failed to receive response from daemon
21:37:06.544 Error TundConnector 1430 Error in NativeDaemonConnector
21:37:06.544 Error TundConnector 1430 java.io.IOException: No such file or directory
21:37:06.544 Error TundConnector 1430 at android.net.LocalSocketImpl.connectLocal(Native Method)
21:37:06.544 Error TundConnector 1430 at android.net.LocalSocketImpl.connect(LocalSocketImpl.java)
21:37:06.544 Error TundConnector 1430 at android.net.LocalSocket.connect(LocalSocket.java)
21:37:06.544 Error TundConnector 1430 at com.android.server.NativeDaemonConnector.listenToSocket(NativeDaemonConnector.java)
21:37:06.544 Error TundConnector 1430 at com.android.server.NativeDaemonConnector.run(NativeDaemonConnector.java)
21:37:06.544 Error TundConnector 1430 at java.lang.Thread.run(Thread.java:1027)
Code:
21:37:12.379 Error PowerManagerService 1430 powerstate != 0
21:37:13.814 Error rmt_storage 1710 rmt_storage wait event ioctl failed
21:37:18.463 Error DisplayListener 1430 Could not open listner socket
21:37:19.134 Error ContactMessageStore 1571 DialerService connected !

try install UNITY V9 kernel over it. if it works then, you must swap out the files in system/lib/modules folder, from the same kernel as the boot.img

I tried but not working ı thınk missing a file about mobile network, modules changed too.

I dİd İt!

adakaya1994 said:
I dİd İt!
Click to expand...
Click to collapse
the fix was? modules?

ERROR: HRESULT = 0x8024a110

Can't send update to my Lumia build 10.10.10586.29 i have always
Code:
(IUTool Version: 11:52:10/Feb 7 2014)
Log file: C:\Users\Thierry\AppData\Local\Temp\IUTool-{299338D7-E9AD-4D02-BD74-B341894FDEEF}.etl
[1] Started device 6ea0f2436b51fa6d88d745b2c8dde3d3
[1] Transferring files started
[1] Transferring files complete: 2 files
[1] Update started
[1] Installation failed (HRESULT = 0x8024a110)
[1] Failed (0x8024a110)
ERROR: 0x8024a110
Command failed. (HRESULT = 0x8024a110)

Im trying to deploy old nokia.service_ndtksvc.generic.spkg.cab
0x80188306
E_FILE_COLLISION
More than one package targeted for the same partition contained the same file.

titi66200 said:
Can't send update to my Lumia build 10.10.10586.29 i have always
Code:
(IUTool Version: 11:52:10/Feb 7 2014)
Log file: C:\Users\Thierry\AppData\Local\Temp\IUTool-{299338D7-E9AD-4D02-BD74-B341894FDEEF}.etl
[1] Started device 6ea0f2436b51fa6d88d745b2c8dde3d3
[1] Transferring files started
[1] Transferring files complete: 2 files
[1] Update started
[1] Installation failed (HRESULT = 0x8024a110)
[1] Failed (0x8024a110)
ERROR: 0x8024a110
Command failed. (HRESULT = 0x8024a110)
Click to expand...
Click to collapse
Astoria's dead. Get over it.

Sahara fail!! help! tried EVERYTHING!

Hi, i just bricked my phone and now it shows the ZUK logo briefly and then the screen goes black and the led keeps on.
i tried the whole cable trick (connecting the black and the green cable) and now the whole device's screen is black and when i try to flash a rom with QFIL i get this (log file attached):
Validating Application Configuration
Load APP Configuration
COM:10
SAHARA:True
SAHARA:C:\zuk\prog_emmc_firehose_8996_ddr.elf
SEARCHPATH:C:\zuk
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\zuk
RAWPROGRAM file path: C:\zuk\rawprogram0.xml
PATCH file path:C:\zuk\patch0.xml
Programmer Path:C:\zuk\prog_emmc_firehose_8996_ddr.elf
Process Index:0
Start Download
Program Path:C:\zuk\prog_emmc_firehose_8996_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM10 -s 13:C:\zuk\prog_emmc_firehose_8996_ddr.elf 'Current working dir: C:\Users\edoardo\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\zuk\prog_emmc_firehose_8996_ddr.elf
01:47:56: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
01:47:56: ERROR: function: sahara_main:854 Sahara protocol error
01:47:56: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
yes, i tried putting the folder in C:/ and name it like zuk. and i do have the windows drivers installed. when i open Device manager i get: "Qualcomm HS-USB QDLoader 9008"
can anybody help me???

ok, i managed to solve the problem: the thing was that i was changing cable when i got the phone on qfil mode. i managed to remove the bridge between the two cables without removing the cable and flashing. it worked!

QPST v2.7.460
Try this. The new version fixed the sahara error. I tried myself and its working.
http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/

edulus91 said:
Hi, i just bricked my phone and now it shows the ZUK logo briefly and then the screen goes black and the led keeps on.
i tried the whole cable trick (connecting the black and the green cable) and now the whole device's screen is black and when i try to flash a rom with QFIL i get this (log file attached):
Validating Application Configuration
Load APP Configuration
COM:10
SAHARA:True
SAHARA:C:\zuk\prog_emmc_firehose_8996_ddr.elf
SEARCHPATH:C:\zuk
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\zuk
RAWPROGRAM file path: C:\zuk\rawprogram0.xml
PATCH file path:C:\zuk\patch0.xml
Programmer Path:C:\zuk\prog_emmc_firehose_8996_ddr.elf
Process Index:0
Start Download
Program Path:C:\zuk\prog_emmc_firehose_8996_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.exe -p \.\COM10 -s 13:C:\zuk\prog_emmc_firehose_8996_ddr.elf 'Current working dir: C:\Users\edoardo\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\zuk\prog_emmc_firehose_8996_ddr.elf
01:47:56: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
01:47:56: ERROR: function: sahara_main:854 Sahara protocol error
01:47:56: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
yes, i tried putting the folder in C:/ and name it like zuk. and i do have the windows drivers installed. when i open Device manager i get: "Qualcomm HS-USB QDLoader 9008"
can anybody help me???
Click to expand...
Click to collapse
The same happened to me it was fixed by unlocking the bootloader again as this happens when the bootloader is relocked in my case while flashing a zui based custom rom

QFIL Sahara Error
spandu500 said:
The same happened to me it was fixed by unlocking the bootloader again as this happens when the bootloader is relocked in my case while flashing a zui based custom rom
Click to expand...
Click to collapse
My Phone IS Bricked. Automatically vibrates and blinks led with short 10-12 second interval. I have managed to get it as Qloader 9008 on pc but unable to flash using QFIL or Mi Flash tool.
Please Help!!!!

ChetanLokhande said:
My Phone IS Bricked. Automatically vibrates and blinks led with short 10-12 second interval. I have managed to get it as Qloader 9008 on pc but unable to flash using QFIL or Mi Flash tool.
Please Help!!!!
Click to expand...
Click to collapse
Well first press the vol up and power button until the the led blinks leave it immediately
If successfully done then the boot logo should flash and then the led would stop blinking
If the led still blinks try again
If the led stops blinking the go ahead
Hold the vol up and down button simultaneously and plug it to pc
It should then boot into fastboot
From there unlock it and you're good to go

edulus91 said:
Hi, i just bricked my phone and now it shows the ZUK logo briefly and then the screen goes black and the led keeps on.
i tried the whole cable trick (connecting the black and the green cable) and now the whole device's screen is black and when i try to flash a rom with QFIL i get this (log file attached):
Validating Application Configuration
Load APP Configuration
COM:10
SAHARA:True
SAHARA:C:\zuk\prog_emmc_firehose_8996_ddr.elf
SEARCHPATH:C:\zuk
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\zuk
RAWPROGRAM file path: C:\zuk\rawprogram0.xml
PATCH file path:C:\zuk\patch0.xml
Programmer Path:C:\zuk\prog_emmc_firehose_8996_ddr.elf
Process Index:0
Start Download
Program Path:C:\zuk\prog_emmc_firehose_8996_ddr.elf
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM10 -s 13:C:\zuk\prog_emmc_firehose_8996_ddr.elf 'Current working dir: C:\Users\edoardo\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\zuk\prog_emmc_firehose_8996_ddr.elf
01:47:56: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
01:47:56: ERROR: function: sahara_main:854 Sahara protocol error
01:47:56: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
yes, i tried putting the folder in C:/ and name it like zuk. and i do have the windows drivers installed. when i open Device manager i get: "Qualcomm HS-USB QDLoader 9008"
can anybody help me???
Click to expand...
Click to collapse
can you resolve this ?

darthvader0235 said:
Try this. The new version fixed the sahara error. I tried myself and its working.
http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/
Click to expand...
Click to collapse
same problem with this

Use this QPST version. it will solve your problem.
Download QPST > http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/

Sahara fail
Good Morning people.
The QPST 2.7.460 show this problem :
13: C:\Program Files\Qualcomm\QPST\bin\K33-b36_S150_161114_ROW_QPST\SW\prog_emmc_firehose_8937_ddr.mbn
01:47:56: ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes.
01:47:56: ERROR: function: sahara_main:924 Sahara protocol error
01:47:56: ERROR: function: main:303 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Device: LENOVO K6 PLUS dual chip k53b36

fernando_gomes29 said:
Good Morning people.
The QPST 2.7.460 show this problem :
13: C:\Program Files\Qualcomm\QPST\bin\K33-b36_S150_161114_ROW_QPST\SW\prog_emmc_firehose_8937_ddr.mbn
01:47:56: ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes.
01:47:56: ERROR: function: sahara_main:924 Sahara protocol error
01:47:56: ERROR: function: main:303 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Device: LENOVO K6 PLUS dual chip k53b36
Click to expand...
Click to collapse
same problem

AymenDe7 said:
same problem
Click to expand...
Click to collapse
Try to minimise the directory names..... I had the exact same problem and this solved it.

sahara fail
JashanjotSidhu said:
Try to minimise the directory names..... I had the exact same problem and this solved it.
Click to expand...
Click to collapse
Problem continue

fernando_gomes29 said:
Problem continue
Click to expand...
Click to collapse
Try to start the download immediately as soon as device goes in EDL mode.
Select all the files in QFIL before entering EDL and just click Download when the device goes in EDL.

Sahara fail 2
JashanjotSidhu said:
Try to start the download immediately as soon as device goes in EDL mode.
Select all the files in QFIL before entering EDL and just click Download when the device goes in EDL.
Click to expand...
Click to collapse
I´ve tried another way, the messenger is:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Fail to find QDLoader port after switch
Finish Download

i just switched to win 7 from win 10.. i feel win 7 is better than win 10 when it comes to flashing & stuff

Sahara fail 2
I got it, I installed an old QFIL,

Solved
The solution is very simple: just boot into fastboot mode and reboot edl (if using custom rom) and as soon as it enters click the download button on qfil. Have to be a little fast but works everytime.

BishalSC said:
The solution is very simple: just boot into fastboot mode and reboot edl (if using custom rom) and as soon as it enters click the download button on qfil. Have to be a little fast but works everytime.
Click to expand...
Click to collapse
How do you enter EDL through fastboot?

Shinichi Kudo said:
How do you enter EDL through fastboot?
Click to expand...
Click to collapse
Using the following commands...
fastboot -i 0x2b4c oem reboot-edl

Problem rooting with XiaoMiTool V2

Hello everyone,
I tried to root my Mi Mix 2 with XiaoMiTool V2 but I have got a problem during the step of pushing file magisk_20.4.zip.
In the log, I can see :
[10:07:04][PSTA ][70c729f4] Start process (781): "C:\Xiaomi\XiaomiTool2\res\tools\adb.exe" "-s" "ebf1f094" "push" "C:\Xiaomi\XiaomiTool2\res\tmp\magisk_20.4.zip" "/sdcard/magisk_20.4.zip"
[10:07:05][PROC ][55e63029] Process (781) output: adb: error: failed to copy 'C:\Xiaomi\XiaomiTool2\res\tmp\magisk_20.4.zip' to '/sdcard/magisk_20.4.zip': remote couldn't create file: No such file or directory
[10:07:05][PROC ][55e63029] Process (781) output: C:\Xiaomi\XiaomiTool2\res\tmp\magisk_20.4.zip: 1 file pushed, 0 skipped. 48.9 MB/s (5942417 bytes in 0.116s)
[10:07:05][INFO ][70c729f4] Process (781) ended with exit code: 1, output len: 268
[10:07:05][ERROR ][70c729f4] Task error: exception: Failed to push file to the device: adb: error: failed to copy 'C:\Xiaomi\XiaomiTool2\res\tmp\magisk_20.4.zip' to '/sdcard/magisk_20.4.zip': remote couldn't create file: No such file or directory : AdbPushTask -> status: RUNNING
Can you help me ??
Thanks by advance !

Do you know an other way to root it easily ?
Thanks by advance.