The J6 is doing an odd Boot loop. You see a white robot with an exclamation mark above his head for less than a second. Then you see a black screen with writing saying '#manual mode'
E: failed to mount / cache
E: can't mount cache.
Can anyone help?
Related
so everything was working fine, I had strarburst rom and then try to load zedomax kernal via recovery, so I got to recovery and did a format/system then wipe cache etc.. and then I press power by accident then everything just got screw up, so now I can still get to recovery but I get a lot of errors see below, so anything that I do I get the following ..so I try to load a stock rom/kernal via odin( everything seams smooth because it loads it up,) but phone never reboots i get stock at boot screen.. any suggestions..
CWM-based Recovery v5.0.2.3
E: fail to open/etc/recovery.fstab (no such file or directory)
E: unknown volume for patch cache/recovery/log
E: Can't mount/cache/recovery/command
E: Can't open cach/recovery/log
got it fix, figure it out after 1 hour of hard searching for info etc..
Hello folks, hopefully somebody can help me out with this issue or I may just have to bite the bullet and see what the repair costs are going to be from Acer. I have an Iconia A100 that is unlocked and rooted. I never did get around to loading a custom ROM (was waiting for the JB ROMs to get a little bit more stable) and was just running the stock ICS. It also seems that I didn't successfully load a recovery image so I now seem to be totally out of luck. I went to use my tablet while it was still on but the screen refused to turn on after pressing the home button or pressing the power button. So I decided to reset it and figured that would fix it. Now it's stuck booting to the screen with the distorted text at the top and the multiple acer logos at the bottom. I've tried a factory reset to clear the cache and that didn't help although it did say deleting user data and cache. I tried booting into recovery but found that the CWM that I thought I had installed wasn't installed and all I get is a fallen down android icon with a red exclamation over it. If I power up holding down the volume up key and then flicking the screen rotation switch I get it to display that it's in USB fastboot mode but if I type in adb devices it doesn't get listed as an attached device when hooked into my PC. One other note if I leave it at the distorted text and plug it into my PC via USB Windows 7 detects it as a MPT USB Device which it's not able to locate a driver for.
Ok, some additional information:
I was trying to get something out of the screen where I have the fallen down android with the red exclamation point over it and it seems that the default recovery is still installed in Android system recovery (3e). I can't seem to select any menu options on the screen but it does give some additional info. It looks like the eMMC may be partially or completely borked, I'm not sure which. Here's what's on the screen:
Android system recover (3e)
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Then in yellow text:
E: Can't open /dev/block/mmcblk0p5
(No such file or directory)
E: failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E: failed to mount /cache (No such file or directory)
This goes on for a bit of being unable to open various directories. Is there anyway at this point to re-lock the bootloader and erase traces of doing so? I find it hard to believe that unlocking the bootloader would cause what seems to be a hardware fault but I could be wrong.
nsafreak said:
Hello folks, hopefully somebody can help me out with this issue or I may just have to bite the bullet and see what the repair costs are going to be from Acer. I have an Iconia A100 that is unlocked and rooted. I never did get around to loading a custom ROM (was waiting for the JB ROMs to get a little bit more stable) and was just running the stock ICS. It also seems that I didn't successfully load a recovery image so I now seem to be totally out of luck. I went to use my tablet while it was still on but the screen refused to turn on after pressing the home button or pressing the power button. So I decided to reset it and figured that would fix it. Now it's stuck booting to the screen with the distorted text at the top and the multiple acer logos at the bottom. I've tried a factory reset to clear the cache and that didn't help although it did say deleting user data and cache. I tried booting into recovery but found that the CWM that I thought I had installed wasn't installed and all I get is a fallen down android icon with a red exclamation over it. If I power up holding down the volume up key and then flicking the screen rotation switch I get it to display that it's in USB fastboot mode but if I type in adb devices it doesn't get listed as an attached device when hooked into my PC. One other note if I leave it at the distorted text and plug it into my PC via USB Windows 7 detects it as a MPT USB Device which it's not able to locate a driver for.
Ok, some additional information:
I was trying to get something out of the screen where I have the fallen down android with the red exclamation point over it and it seems that the default recovery is still installed in Android system recovery (3e). I can't seem to select any menu options on the screen but it does give some additional info. It looks like the eMMC may be partially or completely borked, I'm not sure which. Here's what's on the screen:
Android system recover (3e)
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Then in yellow text:
E: Can't open /dev/block/mmcblk0p5
(No such file or directory)
E: failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E: failed to mount /cache (No such file or directory)
This goes on for a bit of being unable to open various directories. Is there anyway at this point to re-lock the bootloader and erase traces of doing so? I find it hard to believe that unlocking the bootloader would cause what seems to be a hardware fault but I could be wrong.
Click to expand...
Click to collapse
Its a typical emmc brick, there's threads all over about this. All you can do is send it to acer for repair, sorry to say.
Plug it in and let try to boot on its own for an hour or so, what you want is failsafe, blue power led on but screen off. Then send it to Acer.
Sent from my Galaxy Nexus using xda app-developers app
Hi, I am needing your help badly.
Earlier today I was running low on battery. I tried to switch it back on as I am waiting for an important message. I left it on at 1% and placed my phone back to my bag. When I checked it for messages, I saw the samsung logo and thought that phone might have rebooted.
After 30minutes, it's still stuck at samsung logo. When i arrived home I plugged it in for charging and tried to switch it off, it won't let me. So i went to recovery. Then I saw an error:
E: could not mount data/data to set up/data/media path!
E: can't mount/cache/recovery/command
E: can't mount/cache/recovery/log
E: can't open/cache/recovery/log
E: can't mount/cache/recovery/last_log
E: can't open/cache/recovery/last_log
E: can't mount/cache/recovery/last_install
E: can't open/cache/recovery/last_install
I tried to wipe cache/dalvik it was successful but it gives me the error above. I tried to reinstall RR 4.3 but i get an error that says installation aborted.
I tried to backup, it says it can't find a path.
I have not installed any app. Recent activity: installed CM Glass Theme to phone.
I am really lost on what to do now. Would really appreciate your help.
Thank you so much.
andreamae said:
Hi, I am needing your help badly.
Earlier today I was running low on battery. I tried to switch it back on as I am waiting for an important message. I left it on at 1% and placed my phone back to my bag. When I checked it for messages, I saw the samsung logo and thought that phone might have rebooted.
After 30minutes, it's still stuck at samsung logo. When i arrived home I plugged it in for charging and tried to switch it off, it won't let me. So i went to recovery. Then I saw an error:
E: could not mount data/data to set up/data/media path!
E: can't mount/cache/recovery/command
E: can't mount/cache/recovery/log
E: can't open/cache/recovery/log
E: can't mount/cache/recovery/last_log
E: can't open/cache/recovery/last_log
E: can't mount/cache/recovery/last_install
E: can't open/cache/recovery/last_install
I tried to wipe cache/dalvik it was successful but it gives me the error above. I tried to reinstall RR 4.3 but i get an error that says installation aborted.
I tried to backup, it says it can't find a path.
I have not installed any app. Recent activity: installed CM Glass Theme to phone.
I am really lost on what to do now. Would really appreciate your help.
Thank you so much.
Click to expand...
Click to collapse
another SDS?
if you can't even flash with Odin, then I hope you still have warranty
yaro666 said:
another SDS?
if you can't even flash with Odin, then I hope you still have warranty
Click to expand...
Click to collapse
Not sure about the exact issues with SDS. But I can still see it charge, only when I power on, I'm stuck on Samsung logo. Also, I no longer have warranty
This never happened before. I wiped cache and dalvik cache before I flashed the HK sound mod, it was fine, I then installed the Viper4android installer, the screen was frozen on "please wait" for a long time, I pressed and swiped the screen a few times and it suddenly showed E: Unable to mount '/cache'. I then tried to wipe cache/dalvik cache again but a few more red lines similar to the E: Unable to mount '/cache' showed up. I then pressed reboot.
The thing is my phone seems working fine and both HK sound mod and V4A work but I don't dare to wipe anything in recovery at the moment.
Can someone let me know what happened? Is my phone okay or not?
Flash stock recovery and FORMAT cache partition. After this you can return to TWRP.
Thanks it seems okay now.
Hi,
I installed clockworkmod recovery 6.0.5.1 via Odin, rooted my Samsung Galaxy s4 Mini and installed cyanogenmod 11 (from this thread http://forum.xda-developers.com/showthread.php?t=2558685). Everything went fine, but when I enabled wifi connection my device freezed and when I removed the battery it wouldn't power on again: the display didn't light up and it wouldn't even vibrate.
After a full night charge, the device turned on again, but it is stuck on the black screen with the white Samsung logo and a yellow writing saying "Set Warranty Bit: kernel".
I tried flashing the stock rom but it didn't work (https://samsung-firmware.org/download/Galaxy-S4-Mini-LTE/62n1/ITV/I9195XXUCOG1/I9195ITVCOG1/). I then tried installing another cyanogenmod, but the result didn't change, so I flashed different recoveries through Odin, but I can't get them work: I am stuck with the cwm 6.0.5.1 and can't change nor the recovery, nor the ROM.
In the download mode I can see "write protection: enable" on the top of the screen and if I enter in the cwm recovery I get on the bottom:
Code:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open /cache/recovery/last_install
Do you have any ideas on how could I get it to work?
Thank you.
you can asscess recovery? :/
InFam0us-1985 said:
you can asscess recovery? :/
Click to expand...
Click to collapse
Yes I can, but the problem is that when I try to flash a ROM to boot android the recovery says that the installation is complete, but when I reboot nothing changed. Is there an effective way to replace this recovery and install a ROM? Thank you for your time.
Well nooby stuff - did you Clear dalvik cache and cache partition? and do the system and data wipe before flashing the rom?