Develop Bugs

[ROM][UNOFFICIAL] Lineage 15.1 Manta [NEXUS10][01OCT2019][MONTHLY]

Again, credits to the great @followmsi
Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Known issues:
- Camera is not working (broken HAL1 camera and unsupported HAL2 camera)
- Headphone jack is not fully working
Instructions:
1. Flash ROM
2. Flash Gapps (I use opengapps PICO)
3. Reboot to OS
4. Profit?
5. Reboot to Recovery to install Magisk (Optional)
Download Link:
https://drive.google.com/open?id=1BL...oJRV5Vms_MZF3N
Sources:
https://github.com/KiDwayne/android_kernel_samsung_manta
https://github.com/LineageOS
Credits to:
LineageOS Team
@followmsi

Initial release:
Direct Link https://drive.google.com/open?id=1WMwEpiBSzJX8X56rEg6NUz6IhXD-kh_v
May Patch
Others are sticking to LOS
Whatever doesnt work in Nougat doesn't work in Oreo

Opening post download link doesn't work. You copy pasted the text with the .... instead of using the link
Just downloading now to install over older 15.1 build.

Thanks for taking over. Everything is working fine.

flashed on my manta to use it as a daily driver as an home automation display, seems to work pretty good, subscribing for new updates.

Thanks!

Thanks a bunch, may build runs smooth.
Gonna test this one, too.

Are there any users who installed both the 14.1 and 15 versions? How do they compare?

Is there a kink for the opengapps PICO?

The download link is not working anymore.

Markster93 said:
The download link is not working anymore.
Click to expand...
Click to collapse
Check 2nd post , link working
Sent from my Nexus 10 using Tapatalk

New Build up! Terribly sorry for the holdup.
Direct Link: https://drive.google.com/open?id=1b9B6wr4NTlP5ItCLrEbzgivw8CXTNB_f
Changelog:
-June Security Patch
-LOS side updates and optimization

Hi, Downloaded the latest ROM and it flashed fine. I then factory reset the tablet, as I'm planning to give it to my father. Unfortunately, the setup wizard keeps stopping Is there any possibility this can be fixed? It would be much appreciated!

fhyfds said:
Hi, Downloaded the latest ROM and it flashed fine. I then factory reset the tablet, as I'm planning to give it to my father. Unfortunately, the setup wizard keeps stopping Is there any possibility this can be fixed? It would be much appreciated!
Click to expand...
Click to collapse
I dirty flashed fine. Might be something at the back.
For now I am working with the LOS14.1 issues, worst case scenario, try this, clean flash previous build, setup and then dirty update. Tell me if it works! So sorry for the inconveniences.

Thanks, that worked great! Thank you for your work!

Works fine so far. But there's a folder "!ReadyToFlash\Root_Files" which includes amongst others "busybox_signed.zip" and "SR2-SuperSU-2.79....zip".
I've flashed them both successfully in TWRP but after reboot I can't see Busybox nor SuperSU and the Device is still unrooted (developer options offers root access as "only ADB" only).
Tried to root the Device again. This Time with Nexus Root Toolkit, which installs it's own SuperSU. But no effect again.
After this I found the official LineageOS 15.1 addonsu-15.1-arm-signed.zip and flashed it as well. Again to no avail.
Bootloader Mode says "Lock State: Unlocked". So what's wrong here?
And as I've now flashed so far three different versions of SuperSU and BusyBox (which I can't find anywhere although a root checker says it's installed), do I have to uninstall these files to prevent further problems caused by orphan files from these Installations?

cobalt100b said:
Works fine so far. But there's a folder "!ReadyToFlash\Root_Files" which includes amongst others "busybox_signed.zip" and "SR2-SuperSU-2.79....zip".
Click to expand...
Click to collapse
Maybe these are left-overs from a previous ROM? Better delete them and use Magisk which is known to work with this ROM.

New Update Finally Up!
Sorry caught up by work, resyncing and stuff took awhile.
Direct Link: https://drive.google.com/open?id=1eFj7mbLsGvoBle4nYS-PAHh6AUm5wYKq
Changelogs:
Huge LOS Side updates(causing delay)
September Security Patch

New Update Finally Up!
Sorry caught up by work, resyncing and stuff took awhile.
Direct Link: https://drive.google.com/open?id=1eFj7mbLsGvoBle4nYS-PAHh6AUm5wYKq
Changelogs:
Huge LOS Side updates(causing delay)
September Security Patch

KiD3991 said:
New Update Finally Up!
Sorry caught up by work, resyncing and stuff took awhile.
Direct Link: https://drive.google.com/open?id=1eFj7mbLsGvoBle4nYS-PAHh6AUm5wYKq
Changelogs:
Huge LOS Side updates(causing delay)
September Security Patch
Click to expand...
Click to collapse
Thanks for your ongoing great support! Just downloaded and flashed successfully.

Lineageos for Gigaset GS290

Hi all,
I tried to find anything in regards of using lineageos with the Gigaset GS290, but unfortunately I was not able to find any note.
Do anybody knows if there is a possibility to install lineageOS on that device?
btw. I used also the google search but there was also no result.
Many thanks in advance for any hint.
BR
Martin

McT73 said:
Hi all,
I tried to find anything in regards of using lineageos with the Gigaset GS290, but unfortunately I was not able to find any note.
Do anybody knows if there is a possibility to install lineageOS on that device?
btw. I used also the google search but there was also no result.
Many thanks in advance for any hint.
BR
Martin
Click to expand...
Click to collapse
Nothing.

McT73 said:
Hi all,
I tried to find anything in regards of using lineageos with the Gigaset GS290, but unfortunately I was not able to find any note.
Do anybody knows if there is a possibility to install lineageOS on that device?
btw. I used also the google search but there was also no result.
Many thanks in advance for any hint.
BR
Martin
Click to expand...
Click to collapse
https://mastodon.social/@gael/104914516447228584

/e/OS has been ported to the GS290 by /e/ and Gigaset, they just announced it:
/e/ announces the /e/-GS290 as the latest device available with privacy friendly /e/OS pre-installed - e Foundation - deGoogled unGoogled smartphone operating systems and online services - your data is your data
/e/ announces the /e/-GS290 as the latest device available with privacy friendly /e/OS pre-installed December 17th 2020 - /e/OS, the privacy by design operating system is pleased to announce that the best-selling GS290 by Gigaset, the major European electronics company that produces smartphones...
e.foundation
They also sell it as /e/-GS290, already flashed: https://esolutions.shop/shop/e-os-gs290/

https://build.lolinet.com/file/lineage/GS290/
I decided to add some info:
- It automagically installs the latest Firmware.
- This has working VoLTE and stuff.
- This is an clean device tree (the /e/ one is hacked together based on Volla's Ubuntu Touch device tree)
- This has been developed by the a bit famous Erfan Abdi (erfanoabdi).

Deleted

nift4 said:
https://build.lolinet.com/file/lineage/GS290/
I decided to add some info:
- It automagically installs the latest Firmware.
- This has working VoLTE and stuff.
- This is an clean device tree (the /e/ one is hacked together based on Volla's Ubuntu Touch device tree)
- This has been developed by the a bit famous Erfan Abdi (erfanoabdi).
Click to expand...
Click to collapse
@nift4, I'm very impressed with your ROM lineage-17.1-20210318-EXPERIMENTAL-GS290. At first glance, it runs like clockwork. I can't tell you the details yet. Please continue. I would be happy to donate a coffee or more...

iodemos said:
@nift4, I'm very impressed with your ROM lineage-17.1-20210318-EXPERIMENTAL-GS290. At first glance, it runs like clockwork. I can't tell you the details yet. Please continue. I would be happy to donate a coffee or more...
Click to expand...
Click to collapse
Actually, it's not by me, but by @erfanoabdi. I wrote that in the post tho.

@erfanoabdi
I flashed the latest 17.1 rom but without flashing the firmware (mine was newer, had the february 2021 update installed before switching to your rom). Now the compass does not work, would it work if I would downgrade the firmware to what is included in the zip?
Second problem:
Recovery reboots when inserting an USB cable and connecting it to a linux pc. Had to flash though /e/ recovery then switch to the lineage recovery and refrain from inserting the USB cable.
Any ideas?

My Gs290 works now with the latest 18.1 rom. really happy this is made possible! thanks sir. Erfanoabdi ! i'll buy you a coffee too!
i did notice outgoing calls are not possible no sound and hang up after 8 seconds , receiver has no sound neither.
incomming calls work fine . putting phone on speaker does not work , still on earspeaker.
i did mannage to ring a person on 3G but no ringing and no sound afterwards.
strangely a helpdeskline of a company (fixed line ) did work
don't know if i would need to flash to 17.1 rom to have calling fully possible???

areshinakya said:
@erfanoabdi
I flashed the latest 17.1 rom but without flashing the firmware (mine was newer, had the february 2021 update installed before switching to your rom). Now the compass does not work, would it work if I would downgrade the firmware to what is included in the zip?
Second problem:
Recovery reboots when inserting an USB cable and connecting it to a linux pc. Had to flash though /e/ recovery then switch to the lineage recovery and refrain from inserting the USB cable.
Any ideas?
Click to expand...
Click to collapse
I did need twrp gs290 recovery for succesful completion , other wise it looped in to "smartphone in orange state. and when connecting the smartphone in fastboot to the pc it would reboot in orange state....
also need the right driver for the gigaset GS920 chip https://www.getdroidtips.com/install-mediatek-mt65xx-usb-vcom-drivers/
(don't know if it's trustworthy) and update it with driver booster 8 (easy )
(In win10 you need to restart in advanced startupsettings and push "7" disable drive signing enforcement before doing so)
Or update "android device " in device manager with the driver.

areshinakya said:
@erfanoabdi
I flashed the latest 17.1 rom but without flashing the firmware (mine was newer, had the february 2021 update installed before switching to your rom). Now the compass does not work, would it work if I would downgrade the firmware to what is included in the zip?
Second problem:
Recovery reboots when inserting an USB cable and connecting it to a linux pc. Had to flash though /e/ recovery then switch to the lineage recovery and refrain from inserting the USB cable.
Any ideas?
Click to expand...
Click to collapse
1- yep that should work
2- known bug and will be fixed sooner or later

FlashedMeself said:
My Gs290 works now with the latest 18.1 rom. really happy this is made possible! thanks sir. Erfanoabdi ! i'll buy you a coffee too!
i did notice outgoing calls are not possible no sound and hang up after 8 seconds , receiver has no sound neither.
incomming calls work fine . putting phone on speaker does not work , still on earspeaker.
i did mannage to ring a person on 3G but no ringing and no sound afterwards.
strangely a helpdeskline of a company (fixed line ) did work
don't know if i would need to flash to 17.1 rom to have calling fully possible???
Click to expand...
Click to collapse
Does this still happen?

[ROM][SM-P900][UNOFFICIAL] Lineage 17.1 | Android 10 Q | 20210419

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions.
I'm using pico/nano gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Full wipe all
4. Flash firmware and gapps
Work
almost all
Known Issues
- camera
Links
LineageOS Builds
6. 20210419: april security patch: https://drive.google.com/file/d/1-Lxf_C_K7saHJPgzJj_tSv8J5FfPS468/view?usp=sharing
5. 20201221: december security patch: https://drive.google.com/file/d/1tYzL31kIA9dA3Cpe66h2AUD57kT9r5eY/view?usp=sharing
4. 20200910: latest sources, update kernel, huge audio update (youtube): https://drive.google.com/file/d/1hyn-Q3mkQPjVr2zOBFT2aDEFdR7kkkRJ/view?usp=sharing
3. 20200826: update mixer (mic): https://drive.google.com/file/d/1gOIimcp1rf7BvexhTSOoGURN_oDWq0nT/view?usp=sharing
2. 20200825: update cpu build settings, update power profile, huge kernel update, better clean install: https://drive.google.com/file/d/14XhE-O8Yic8tbJZPcafh8y8w23sDkFno/view?usp=sharing
1. 20200824: init build: https://drive.google.com/file/d/1r7mSz2BIeA2B0pqvUW24dOwO0FC0OWtu/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM
Android: 10.0
Recovery
Use official version from: https://twrp.me/samsung/samsunggalaxynotepro122exynoswifi.html
Root
Install latest magisk from: https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
Sources
Sources: https://github.com/Lineageos
Device: https://github.com/Valera1978/android_device_samsung_v1awifi
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos5420
Vendor: https://github.com/Valera1978/android_vendor_samsung_v1awifi
Thanks
Thanks to LineageOS team

As you promised in your technical preview version , thanks a lot :good: will install it and give feedback

Many thanks @Valera1978.
Cleanly flashed with Data format used the TWRP 3.3.1-0 like for LOS16, instead of 3.4.0-0 with BiTGapps and Magisk.
No more unwanted appearences on the screen when turning. :good:
When focussing on a text the field now shows the letters. :good:
Camera, as you wrote, not working at all. so what
Will carry on testing.
LOS16 will be abandoned, or not?

Is there any battery efficiency improvements with these updates?
Running LOS 14 without gapps -1% per minute. Using the tablet as a remote mouse/keyboard for pc

bmwdroid said:
Many thanks @Valera1978.
Cleanly flashed with Data format used the TWRP 3.3.1-0 like for LOS16, instead of 3.4.0-0 with BiTGapps and Magisk.
No more unwanted appearences on the screen when turning. :good:
When focussing on a text the field now shows the letters. :good:
Camera, as you wrote, not working at all. so what
Will carry on testing.
LOS16 will be abandoned, or not?
Click to expand...
Click to collapse
I think yes. start to the los 16 was done for several reasons:
- I had the experience of switching to the android 10 on 3 different series (exynos7870, qcom800 and qcom820) - in all cases with working android 9 it was a huge number of problems, switch to android 10 I think the most difficult in my memory
- Old device config, every new version has some problems, so it was easier to jump from working 14.1 to 16.0
- faster build 16 minutes on my computer for los 16 vs 26 minutes
Right now in the los 16 we have more problems, then in los 17, and i don't see any reason to spend a weeks for fix it. Better focus on los 17 for some code clean up.

I can live with the death of LOS16 very well.
Having your LOS17 on my T325 as well and I love it.
Btw. Firefox has still the same problems while other browsers work.

bmwdroid said:
I can live with the death of LOS16 very well.
Having your LOS17 on my T325 as well and I love it.
Btw. Firefox has still the same problems while other browsers work.
Click to expand...
Click to collapse
firefox issues on t325 or p900?

Only on P900.
After first usage and sync plus installation of some add-ons it doesn't connect any longer.
Same add-ons and sync on T325 without a problem.

bmwdroid said:
Many thanks @Valera1978.
Cleanly flashed with Data format used the TWRP 3.3.1-0 like for LOS16, instead of 3.4.0-0 with BiTGapps and Magisk.
No more unwanted appearences on the screen when turning. :good:
When focussing on a text the field now shows the letters. :good:
Camera, as you wrote, not working at all. so what
Will carry on testing.
LOS16 will be abandoned, or not?
Click to expand...
Click to collapse
Where can i find BiTGapps?
I did a clean flash, downloaded ARM GAPPS Stock and i'm having errors "updating ok google model service".
Everytime I try to use the mic the tab restarts.
Other than that it looks amazing *w*

bmwdroid said:
Only on P900.
After first usage and sync plus installation of some add-ons it doesn't connect any longer.
Same add-ons and sync on T325 without a problem.
Click to expand...
Click to collapse
It does connect, pages take time to load but nothing is rendered.
I did get a reboot when using the pen in Squid but after restart I played with Squid for a while with no problem!
BIG thanks to Valera !!!

Don't care about a working firefox any longer as I just saw how new version looks like on other device.
So I'm gonna switch browser anyhow.

bmwdroid said:
Don't care about a working firefox any longer as I just saw how new version looks like on other device.
So I'm gonna switch browser anyhow.
Click to expand...
Click to collapse
Thats why I had to modify the APK so it will not update.
The old firefox (I think) is the best browser for this tablet.
The new firefox is much worse, even for normal phones.
So a fix for whyever firefox does not render the pages would be great

Anyone having troubles using the Mic? Everytime I try to use anything related the tab restarts o.o
Also having "updating OK Google model service" download error.
Which GApps version did you guys install?
Thanks!

Thanks @Valera1978 for LOS 17.1 it works good with a few problems but it maybe the apps like Firefox causing reboots and camera otherwise I like this ROM. Thanks again for your great work ???

LionheartSilver said:
Anyone having troubles using the Mic? Everytime I try to use anything related the tab restarts o.o
Also having "updating OK Google model service" download error.
Which GApps version did you guys install?
Thanks!
Click to expand...
Click to collapse
Didn't test mic yet as camera not working don't need it then.
Usually I'm using Opengapps pico but that still includes Google TTS what BiTGapps doesn't.
The latter you find in XDA.
Both ARM of course.
Don't have the link right now.

Just noticed pen not recognised at all.
Edit: suddenly it does. Didn't do anything special.

bmwdroid said:
Didn't test mic yet as camera not working don't need it then.
Usually I'm using Opengapps pico but that still includes Google TTS what BiTGapps doesn't.
The latter you find in XDA.
Both ARM of course.
Don't have the link right now.
Click to expand...
Click to collapse
Tried Clean Install using GApps nano, pico, micro and stock, same problem: "updating OK Google model service".
Tried using BitGapps, same problem
Also, mic doesn't work, restarts the tab as soon as you want to use it.
@Valera1978 congrats! it's an amazing ROM *w* everything feels smooth and fast.
Just the Mic Problem, i need it to use Microsoft Teams for calls xD
Congrats!

new update:
1. updated cpu config in dev tree (correct variant cortex-15 config)
2. updated power profile (and here found interesting setting in kernel to speed-up cpu freq up to 2100MHz and seem it's work)
3. updated kernel - net part, I had issues with net on start and made small fix, but now ported all net part from my msm8974 (same 3.4 kernel, but more up to date). firefox still dnw (will continue check), but at least no kernel panic
mic - this is my next priority

Feedback to built one (20200824):
- FPS drops when watching YouTube in higher than 480p (starts lagging behind audio)
- graphic bugs still exist (pixels and boxes)
Will now re-flash and try the new built :good:

Feedback to built one (20200825):
- reboots
- wlan sporadic not working
- freeze sometimes
Feedback to built one (20200824):
youtube bug (same above)

[ROM][SM-P905][UNOFFICIAL] Lineage 18.1 | Android 11 | 20210509

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
6. Uncheck Update Lineage Recovery alongside the OS option during start wizard
Work
almost all
Known Issues
Links
3. 20210509: may security patch: https://drive.google.com/file/d/1xzUPsV8cYLR9OyseUe294VNJfcCffpF9/view?usp=sharing
2. 20210430: april security patch: https://drive.google.com/file/d/1gTDS_1wgnJ9KfIw--CzljLgZ8ahxAR9v/view?usp=sharing
1. 20201224: initial technical build: https://drive.google.com/file/d/19tzaR1YE001awwqThNAn48IXsk6FOobm/view?usp=sharing
Gapps
opengapps: https://sourceforge.net/projects/opengapps/files/arm/test/20210130/
BiTGApps: https://forum.xda-developers.com/t/custom-gapps-bitgapps-for-android.4012165/
P.s. for BiTGApps: Chrome workaround with gapps: Chrome should be a part of system app in Android R (11) but we install it as user app, which break sign-in and sync in chrome. To fix this, allow contacts permission for chrome. Restart chrome and you can add your google account.
Root
Install latest magisk (21.1+) from canary channel: https://github.com/topjohnwu/Magisk/releases/tag/v21.1
Recovery
Use official 3.0.2-0 version from: https://twrp.me/samsung/samsunggalaxynotepro122qcom.html
or use my twrp version: https://forum.xda-developers.com/galaxy-note-pro-12/development/recovery-twrp-3-1-1-0-t3684802
Sources
Sources: https://github.com/lineageos
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Thanks
Thanks to LineageOS team

Nice
Will there be also a P900 build?

Thank you Valera 1978!
PS. I have "Serial console enabled Performance is impacted. To disable, check bootloader" message.

Today I saw that BT is not working at all

BT is already crashed in the last 17 Version from 2020/12 several times. Maybe a common issue?

A build for the P900 would be great! Many thanks to the developers for keeping this get tablet alive and better than ever!

Valera1978, gratitude for keeping our Tablet alive. How is the S-Pen working in this ROM?

Well, I think to try tomorrow to install it! Good work like always Dev

What would I necessarily have to do to Port this to p900

I tried this for a little time. For me it is laggy too much. It's better at the moment Lineage 17.1 even if I need to find the version with palm rejection working because in the last (for me) not work.

I tried this rev. but I immediatly rolled back to 17.1
So buggy and slow. I hope in next updates

finessefigure said:
What would I necessarily have to do to Port this to p900
Click to expand...
Click to collapse
Any progress?

Hi! I flashed the new version and this is perfect, not slow like the other!
I would want use Duo app but from the other side not hear me. If I do a simple video with camera app I can hear my voice. What problem can be???
Thanks a lot
Edit: I found this problem in lineage 17.1 too. Maybe there is some settings that I don't know?!
Edit2: If u want call via skype, duo or other things just use earphones... what a bug lol!

Tanks a lot Valera1978 for the New Update...

No possibility with p900?

New build's great, much smoother than 17.1 and no crashes or other issues so far
Edit: Found out that the lag is somehow caused by me changing the wallpaper. Not sure why since the wallpaper is not live and is only 1920x1200 so it shouldn't cause lag.
Also, system UI keeps stopping when trying to enter settings from the notification shade

Too bad can't download it (neither of them). There seems to be some kind of cooldown or something on Drive. Can anyone confirm?
Edit: Got it installed. Seems to be super smooth. Thank you very much for your work OP. You are da real MVP, this tabled is old but you keep this alive!

its not better compare to 17.1 . change colorful wallpapers in few programs/home unable to change. some graphics issue. video still same as 17.1 camera can not take video .but can take pictures. Thanks Valera1978 for the new upgrade

Updated April security patch. runs smooth, but still everything same camera only can use for photo and few apk graphic could not see. but over all it stable and nice thanks again Valera1978

updated May security patch. unfortunately can not boot. keep goes to recovery mode .do any one can help me what to do to boot as regular system.did any one face same problem

[JDCTeam][Preview] LineageOS 19.0 for jfltexx-UNOFFICIAL

as happened at previous android versions...
sorry for being late...
whats working:
wifi
sim card and calls
UI
adb
charging
USB MTP
audio
microphone and audio rec
reboot/shutdown via menus
whats not working:
camera as always but i know how to fix
home button to wake
bluetooth. somehow i thought i had it fixed but...
Nuff said...
Lineage19.0-jfltexx-UNOFFICIAL-side.zip
drive.google.com
Kernel Source

Would love to test this out. Sadly i don't have jfltexx.

Got it up and running with LOS recovery. What I've noticed so far in 10(-ish) minutes of use
- Volume button to wake doesn't work
- Button illumination doesn't work
- Gesture or on-screen navigation doesn't work
But all that seems minor when you think about it - it's Android 12 on a freakin jfltexx!

Chase Whittemore said:
Would love to test this out. Sadly i don't have jfltexx.
Click to expand...
Click to collapse
you can try it.i guess u wont have calls working

side said:
you can try it.i guess u wont have calls working
Click to expand...
Click to collapse
I'm running jflteusc. I'm pretty sure I can't even flash it.

@side
Flash with JDCTeam TWRP_3.5.2_9-0-Red_Black!
Works great except for reported bugs.
For a first with Android 12 it's really amazing what you have achieved!!!
Congratulations for a job well done.
Fast and smooth!
Tethering via USB works well too.

nice i'll try it when I get a newer device,because I almost bricked my device with the unofficial twrp 3.5.2-9 recovery when installing optimized lineage 14.1

Thank you very much for your excellent work and keeping the S4 alive my question if there are gapps

musicapincia said:
Thank you very much for your excellent work and keeping the S4 alive my question if there are gapps
Click to expand...
Click to collapse
For gapps use BiTGApps-arm-12:
BiTGApps Official - ARM
Custom GApps Package For Android Platform ARM.
www.pling.com

FYI:
I installed :
- Open Camera 1.49.2 --> photo and video work well
- Gravity Screen On Off_v3.32.0.0 --> Awesome (Not needed anymore home button to wake)

In the near future......2100 :
My friends smartphone : Samsung HyperGalaxy S400 HyperUltra Quad-folded with mind controled 3D aerial keyboard.
Me : Samsung Galaxy S4 i9505 with LineageOS v360

side, this is offtopic here, but I managed to install your Lineage 14.1 optimized build, it's blazin' fast! At first it lagged asf, but it needed a restart and now it is fast! The battery is better and I can use my S4 for school finally! Thanks side!

tarantules said:
In the near future......2100 :
...
Me : Samsung Galaxy S4 i9505 with LineageOS v360
Click to expand...
Click to collapse
this would immediate cause an "interview" with "Big Brother" (1984) ...

Screenshots:

If this ROM's bugs fixed later , can I install it with old version of TWRP or must update with latest?
I have TWRP 3.3.1-0 build 2 in Android 10

tarantules said:
If this ROM's bugs fixed later , can I install it with old version of TWRP or must update with latest?
I have TWRP 3.3.1-0 build 2 in Android 10
Click to expand...
Click to collapse
See:
[JDCTeam][Preview] LineageOS 19.0 for jfltexx-UNOFFICIAL
as happened at previous android versions... sorry for being late... whats working: wifi sim card and calls UI adb charging USB MTP audio microphone and audio rec reboot/shutdown via menus whats not working: camera as always but i know how to...
forum.xda-developers.com

done amazing job by master

Thanks for the great job.

Wow, truly amazing. Your unofficial LineageOS19 works better than official LineageOS 18!
Looking forward for new updates. I'd love to see real dark mode (like the one in Lineage 17) for the AMOLED screen, that we obviously have in our S4s.

A new version will surely come. Stay focused