Related
Can anyone help me with this:
I have always used my PPC's in my car connected to an external audio jack via a 3.5mm headphone connection. Not only did I use this for music, but it also allowed me use my car stereo to hear my callers much louder than the speakerphone was capable and still let me to use the built-in mic of the PPC to talk back.
Enter my Artemis and it's proprietary mini-usb audio jack...
I purchased the HTC mini-usb to 3.5mm adapter from expansys so that I could continue to use my in-car 3.5mm connection. Works great for music and TomTom (Austin Powers is scary loud now when he tells me to turn left!) BUT the built-in microphone in the Artemis seems to be disabled whenever the adapter is inserted in the mini-usb jack! I can't use Voicecommand with it inserted and my callers can't hear me until I pull out the adapter - which then takes away my nice loud car stereo to hear them!!!
Presumably, the disabling of the mic is because the mic in the included headset is expected to be used for calls when the audio jack is occupied. I know my configuration is not "standard," but it works (or worked) great for me and I would love to be able to continue to operate this way.
My question is: can anyone tell me which registry values control when the built-in mic is disabled? There must be a value that tells the Artemis to shut off the built-in mic when the headset is plugged in. I would love to change this so that the configuration I described above will work for me again. I have some trepidation about tinkering with my registry too much when I don't have that much experience with it. I hope there is some registry guru out there that will take pity on me and take on this challenge (if it's even possible).
Thanks in advance!
You'll have problems with something like this... I'd assume that it'll work similarly to the headset antenna registry entry, where on connection of the headset a key relating to the FM Radio software is changed from a 0 to a 1 allowing the application to launch.
There are one of 2 outcomes for you though unless you want to get crafty with a button or something to make the changes for you....
1 - Although you'll be able to change the reg setting, plugin in the usb cable or disconnecting it will simply reset the key,
2 - You'll permanently change it and if you want to use anything other than the handset mic you'll need to undo the change.
I'd say more than likely if it a dymanic key though and triggered by connection or disconnection of the usb cable then option 1 will take effect. I'm guessing that you'll need a button (software or hardware assigned) to control this properly.
Good Luck!
I'm too lazy to read.
Check the state and notification broker. Otherwise you'll probably have to directly interface with the audio driver.
V
Me too...?
Hi all,
I too want this fix, using the microphone whilst drawing off the audio feed for my vehicle stereo. Can it not be done with a soldering iron & external mic wired into the dongle adaptor?
Thanks Paul
http://shop.brando.com.hk/htcstereoconverterwithmicrophone.php
Here is an adapter with microphone...
I suggest hacking a handsfree and making your own jack for the car. this is my plan soon!
Hi All,
I have the same problem with my HTC Diamond. Did anyone have a fix for this yet? As i do not mind changing the registry or if someone wanted to make a little program that would do this i would be more then happy to donate for all your troubles.. I'm unable to hack my fm transmitter as it is a holder aswell... see picture
Anyone with a concrete solution?
This seems to be a hot topic! Are we really sure that adapters with mic are not readily available?
If you're au fait with hardware hacking, haret can probably tell you which interrupts are being used and you can write a solution to poll the irqs that way.
V
There is nothing to do with Registry Hacking or Softwares in your case...
psargent said:
Can anyone help me with this:
I have always used my PPC's in my car connected to an external audio jack via a 3.5mm headphone connection. Not only did I use this for music, but it also allowed me use my car stereo to hear my callers much louder than the speakerphone was capable and still let me to use the built-in mic of the PPC to talk back.
Enter my Artemis and it's proprietary mini-usb audio jack...
I purchased the HTC mini-usb to 3.5mm adapter from expansys so that I could continue to use my in-car 3.5mm connection. Works great for music and TomTom (Austin Powers is scary loud now when he tells me to turn left!) BUT the built-in microphone in the Artemis seems to be disabled whenever the adapter is inserted in the mini-usb jack! I can't use Voicecommand with it inserted and my callers can't hear me until I pull out the adapter - which then takes away my nice loud car stereo to hear them!!!
Presumably, the disabling of the mic is because the mic in the included headset is expected to be used for calls when the audio jack is occupied. I know my configuration is not "standard," but it works (or worked) great for me and I would love to be able to continue to operate this way.
My question is: can anyone tell me which registry values control when the built-in mic is disabled? There must be a value that tells the Artemis to shut off the built-in mic when the headset is plugged in. I would love to change this so that the configuration I described above will work for me again. I have some trepidation about tinkering with my registry too much when I don't have that much experience with it. I hope there is some registry guru out there that will take pity on me and take on this challenge (if it's even possible).
Thanks in advance!
Click to expand...
Click to collapse
There is so many ways of soldering of wires (Line IN & Line OUT) using a mini usb to made your PDA more compact...
The built-in microphone in the Artemis or Any other HTC Devices sure have to be disabled whenever the adapter is inserted in the mini-usb jack for the soldering of 2 Line-Out (Audio-Out Left & Right) and 1 Line-In (Audio-In/Microphone) Example: Headset that come with your PDA.
Unless HTC going to make one mini-usb to two cables,one for 3.5mm adapter for headphone and another to Mic.jack or a Microphone itself.
This is quite difficult for HTC to custom a cable or jack for individual need.
I think you have to DIY for your need in this case:
Use the headset that come with your Artemis, the one that have a Mic and mini-usb jack...
Cut away the left & right earphone, soldering the two cables into a 3.5 jack (male or female)
Both this jacks-Male or Female can be found in electronic spare-part shop anywhere.
I'm new in this forum... please cc this Thread to me 'thru Private Messages, so that i can give further help and keep track how the going you guys out there...
Ive been searching around but cant seem to find any apps that would do this. seems to me like it would be quite simple to do. anyone know o something similar to able to quickly put something together?
Main reason at the moment is that i currently have a long wire diagonaly across my room to connect my laptop to my speakers. I just thorght it would be realy good if i could plug my phone into my speakers and then send music to it via bluetooth. Im sure other people have been in this situation where an audio cable has not quite been long enough.
Might be a bit harder but possibly this could work over wifi too and would be able to work from room to room. I expect this would require a pc client though..
any thorghts?
I would love to have something like this. The phone would behave like a bluetooth speaker or headphone (A2DP). This would be fantastic. I was looking for something like this a year ago, I thought I would find a software which helps me do this, but I was unable to find anything then. Maybe we can find something now.
I could try developing such a software if there is not anything of this sort already available. I would be glad if any experienced developer can provide us some starting points, keywords, etc., which would speed up the initial activities.
Use UPNP media server
the simpler solution is to use unpn media server over wifi networks
like twonkys media server. or xmbc
basically the computer where the files are stored will server the files to any network attached device including HTC through webbrowser.
I have my dish tv /Satellite decoder connected to home pc using vlc and watch the tv on my HTC HD using VLC
for sound files i directly load them over network disk
Anil
Bluetooth Audio Receiver
I've got a TV which supports bluetooth headphone. With such a software, I'd be able to use my HTC HD2 as a bluetooth headphone. This should turn the phone into a bluetooth audio reciver, rather than a transmitter.
I've been looking for this software for ages and appreciate any ideas.
pranil said:
the simpler solution is to use unpn media server over wifi networks
like twonkys media server. or xmbc
basically the computer where the files are stored will server the files to any network attached device including HTC through webbrowser.
I have my dish tv /Satellite decoder connected to home pc using vlc and watch the tv on my HTC HD using VLC
for sound files i directly load them over network disk
Anil
Click to expand...
Click to collapse
yea this would have been good. was halfway through downloading xmbc when i realised it wont work in my case.. im at university and the wireless has some security issues that wont let it connect to my phone
also wireless drains quite a bit more battery than bluetooth and would probably have to plug in the phone each time you do this.
some great links though, now we need some bluetooth ones!!!
Is this what you need?
http://beemer.sesma.eu/en/btaudionav.htm
Let's see if I get that right:
You want to send BT stereo audio from your BT-enabled laptop to your phone, and plug your phone into speakers for audio output. Right?
Might be easier to get a bluetooth receiver for your speakers. There are some for your home audio system (e.g. at amazon).
What I did was get a stereo bluetooth headset receiver. You can use it as a bluetooth headset (in your car, on the bus, wherever) OR you can simply plug it into your speakers. Just be sure to find one with a 3,5mm plug (and not wired-on headphones) so that you can use your own headphones or plug in your speakers. There's a choice of fine receivers from
Nokia (BH-214, BH-500, ...)
SonyEricsson (HBH-DS205, HBH-DS980, ...)
Jabra (BT3030, ...)
or you can try and get a cheap but great one from the itech clip series.
HTH.
N.
jonhdoe11112 said:
Is this what you need?
http://beemer.sesma.eu/en/btaudionav.htm
Click to expand...
Click to collapse
no, I dont think so. thanks for the suggestion though!
we arnt trying to get sound from the phone to a bluetooth speaker but instead turn the phone itself into a speaker whcih can recieve audio from other bluetooth devices.
for example if watching a film on my laptop, i would like to plug my phone into my speakers, connect up the bluetooth, and watch rather than running a cable to the speakers which are a long way away.
Nik, you bet me by one...
Nightcookie said:
Let's see if I get that right:
You want to send BT stereo audio from your BT-enabled laptop to your phone, and plug your phone into speakers for audio output. Right?
Might be easier to get a bluetooth receiver for your speakers. There are some for your home audio system (e.g. at amazon).
What I did was get a stereo bluetooth headset receiver. You can use it as a bluetooth headset (in your car, on the bus, wherever) OR you can simply plug it into your speakers. Just be sure to find one with a 3,5mm plug (and not wired-on headphones) so that you can use your own headphones or plug in your speakers. There's a choice of fine receivers from
Nokia (BH-214, BH-500, ...)
SonyEricsson (HBH-DS205, HBH-DS980, ...)
Jabra (BT3030, ...)
or you can try and get a cheap but great one from the itech clip series.
HTH.
N.
Click to expand...
Click to collapse
to be honest ive actualy already ordered this:
http://shoponspot.com/bluetooth-20-a2dp-avrcp-stereo-music-receiver-and-handsfree-black/
I still would like to see this app developed as i can imagine future situations where this happens and i dont want to have to carry this around everywhere.
also people with bluetooth tvs im sure would prefure not to have to use another device all the time and occasionaly you get bluetooth headset transmitters in public places where this might be useful.
hope it is possible!
ooo wow! im a senior member now!!
well i received my bluetooth headset but unfortunatly it charges through the 3.5mm headphone jack so i am unable to leave it there to just work
Ive also tried plugging in a headphone splitter but it realy dosnt like that!! so that means every time i leave my room i will have to put the reciever on charge and every time i return i will have to turn it on and plug it in.
does anyone know if it would be possible to get the phone to work as a bluetooth audio reciever? seems like something it should be able to do
I'd like to bump this because I've been searching for ages for exactly this. I'd personally like to go one step further and have a client that would support A2DP and the handsfree protocol. The latter I would like to allow me to answer and initiate calls to my work mobile using my HD2 as though it was a bluetooth handsfree kit. Then I could use one phone for all my calls.
I can imagine a wide range of useful applications that other solutions like wifi audio streaming or a dedicated bluetooth audio receiver wouldn't match.
I wish I knew how to write software... Maybe if I ever have a few hundred hours of spare time on my hands I'll learn and write an app to do this.
i also want this.
please anyone help.
This would be great.. i currently have an nvidia shield tv and I can plug my normal wired headphones into the nvidia shield's bluetooth remote. The problem is the remote's battery life only lasts a few days when used like this. I would love to be able to use my mobile phone as a back up for when the nvidia remote battery dies. For some reason the nvidia remote won't charge unless my head phones are unplugged.
Hooroo
So I tried searching but I feel like this is a pretty specific item that I'm looking for so sifting through pages and pages of bluetooth headsets and separate car audio setups was frustrating me.
What I'm looking for is a small mic that I can mount near my sun visor that is wired to a bluetooth receiver that connects to the aux input in my car. This would allow my phone to connect via bluetooth and have a handsfree setup that would play through the car stereo without any wires to my phone and without using the phone speaker or mic. Can anybody tell me if such a system exists? I've been googling different terms trying to find things but the best things I can find are proprietary connections for stereos and I would like to stick with my OEM radio.
Thanks for the help, and I do apologize if I overlooked a topic discussing this.
This any help?
ptp.net.au/comfort_9060smart_ANZ.html
That is close to what I'm looking for but I can't find any that just hook in directly through a stereo aux cable, I don't want to have to hook into the back of my head unit. It looks like some of their products may possibly do this, but it seems like they are more complicated so the price is significantly higher. Still looking. Thanks for the help though.
There are a number of units out there that will transmit over FM frequency. This isn't exactly what you're looking for, but it will do the trick. Instead of running the cable to your Stereo AUX port, just tune your radio to the specific station and you'll hear the audio through you car speakers.
This is what I have:
http://direct.motorola.com/hellomoto/t505/
It also has a loud speaker right in it so you can even use it without the FM radio if you desire. You press a button on the back and it'll search for an "open" FM channel and then it speaks the channel number for you to tune into.
Has the added benefit of allowing you to listen to music if you have it on your phone. Includes buttons on the side to allow you to change tracks backward and forward.
Dunno if your still in search for one but Scosche just came out with THIS. It also does Bluetooth Stereo which is a plus!
Hope this helps
I've been hunting for a solution as well (at least one that doesn't require me to buy a new headunit).
I'd love to get an fm transmitter or direct fm line input that supports a2dp with RDS, and has decent transmit power. The soundfly BT ultimate does most of this, but doesn't have RDS via bluetooth. It's a small detail, but it'd be cool to have. Any ideas?
Is there a remote controller that DOES NOT have headphones?
I want to see if I can use it in my car with dual splitter so that one
can be just used as remote controller while another can be hooked up to the
car AUX system.
It's bit annoying to touch phone every time to skip music while on driving.
The remote works by using the mic and ground leads to signal button presses. You are going to have to use an HTC headset connected directly to the phone (not a splitter) if you want the buttons to work.
My suggestion would be to hack an HTC headset to give you a headphone jack instead of earbuds. I have done this myself, and it works great. Alternatively, you could build something specifically for this purpose with a box and some nice buttons and install it in your dash. If you want the schematic on HTC's remote, look here:
http://www.george-smart.co.uk/wiki/HTC_Headphones
Aaron
I would like to build an Android car infotainment device to replace all my gadgets inside the car. One option would be a micro PC with USB touchscreen and a lot of devices connected via USB. The other one would be an Android gadget, either small tablet or TV box.
The biggest question I have is: what Android devices support 5.1 audio? This is a must, though I actually can use only 4 channels. What audio formats are supported for this?
The other question would be TMC - the FM kind, not online.
Are there any embedded platforms out there (except PC and Android) which support multi-channel audio?
Has anyone done this before? I might be reinventing the wheel.
No updates? Either nobody knows about Android 5.1 sound output or they are working under NDAs.
Are you planning on keeping a headunit to control volume, do you want am/fm radio, etc....
without a headunit you will need an amp where you can use the headphone to rca adapter and usually its the amp that would add front and rear to the left/right output of your android device so you would still get the 4 chan output effect. to go for the 5.1 chan you will need another device that actually controls the 5 speakers plus the subwoofer which might be tricky but I'm sure its not impossible.
the setup I was going to go with was a amp that I can mount its power controls (left right front back and volume) (or amp/eq combo) to where I can reach it and build a mount for a 7in (possibly diff size not sure depends on how it will look) and use the heaphone to rca adapter to power the audio and put the usb inside the dash possibly with a little hub if they make it (that way not only is it getting power from it, if it allows, the addition of say a thumb drive with added music/movies. some tablets/phones have fm radios built in as long as something is plugged into the headphone jack (my new phone doesn't seem to have it but thats a feature I will be looking for in a tablet)
4chan amp
eq that would allow 2 chan in and 4 chan out plus sub out (if you have a separate sub amp)
I just want to know if there are any android devices that are able to stream 5.1, I can take it from there. Same question about TMC support.
Some details:
My car is already fitted from the factory with 4 channel preamp and 12 speakers including subwoofer low-pass. It has low-level input for those channels, worst case I would buy a preamp.
FM is pretty much given on most Android devices, probably excluding some tablets, but I won't actually miss it if it's not there.
TMC would be nice since all Androids usually have a GPS sensor and sometimes compass.
Anyway, it was mostly a request for suggestions or even a rant - I'm surprised that something like this doesn't exist yet. With the exception of dedicated units going >$$$-$$$$, an alternative set-up would be a medium-range blueray player coupled with an Android tablet. Music control could be set up with DLNA, bluetooth streaming or mixing player and android audio would be a bit harder but not impossible.
hey friends
this is a nice thought and you are absolutely great.
this is wonderful thread
........................
Great Idea
Hi,
Currently I'm also thinking about installing an android tablet in my car to have music, navigation, movie player, speed camera warning, etc. But the biggest problem is the sound. I want to connect tablet with car audio using jack-jack cable. Everything is fine till the AUX source is selected in car audio device, but when I switch it to Tuner or CD - the sound from tablet is cutted off, so e.g. navigation announcement are not heard.
Any suggestions for this issue?
audio rom
its a shame that there are many many roms but none fur special purposes like this.
we need a car rom
[email protected] said:
Hi,
Currently I'm also thinking about installing an android tablet in my car to have music, navigation, movie player, speed camera warning, etc. But the biggest problem is the sound. I want to connect tablet with car audio using jack-jack cable. Everything is fine till the AUX source is selected in car audio device, but when I switch it to Tuner or CD - the sound from tablet is cutted off, so e.g. navigation announcement are not heard.
Any suggestions for this issue?
Click to expand...
Click to collapse
Only solution can see is to run the audio from the tablet alone. I.e. use the tablet to provide both radio tuner AND navigation. You will end up using the car system purely as an amplifier.
Cris123 said:
Only solution can see is to run the audio from the tablet alone. I.e. use the tablet to provide both radio tuner AND navigation. You will end up using the car system purely as an amplifier.
Click to expand...
Click to collapse
This would be what I would do in this situation. Or just unplug the audio cable from the tablet when using other radio options so the navigation will come through the tablet's speakers.
I want to do something similar but rather than purchase a new device I want to use my Note2. No head unit at all. The Note2 would likely be dedicated to this use and I'd get a different phone to use as, well, a phone.
For sound I was hoping I could use USB OTG to connect a USB sound card with 5.1 output but I'm not sure if this would work. I want to use the sound card instead of audio direct out of the headphone jack because that reduces my connected cables to just one (easier) and should provide at least 4 channel output which eliminates the need for another device to control volume, fader, and balance.
For radio I was going to use SDR for AM/FM (and more) via a cheap USB TV tuner.
http://sdrtouch.com/
Where I'm stuck now is that I'd like to be able to connect an iProduct (iPhone/iPod) like you can to most car radios and control/stream music from the iProduct, via the Android Note2 using USB OTG again. I cannot find how to do this but the Parrot Asteroid Smart runs Android and it seems to be able to do it so it must be possible.
http://www.parrot.com/usa/products/asteroid-range/parrot-asteroid-smart/
Any info anyone can provide regarding the sound card and iPod integration would be highly appreciated.
You can go wireless and use some AirPlay receiver for Android.
I don't know about wired solutions, the classic iPod connector has ~30 pins and some of them are used for audio and some of them are used for serial-like playlist control plus current track information.
brainwash123 said:
You can go wireless and use some AirPlay receiver for Android.
I don't know about wired solutions, the classic iPod connector has ~30 pins and some of them are used for audio and some of them are used for serial-like playlist control plus current track information.
Click to expand...
Click to collapse
It's just a USB to iPod cable that they use for everything else... Parrot Asteroid Smart that I linked to has it as do most modern stock head units.
Did a little more googling and it seems several companies sell android head units that support iPod.
Why don't you use a USB DAC? There are a few out there that are surround sound capable.
Out from the DAC into an eq preamp and out to your existing amplifier. The eq preamp has main volume controls as well as sub control with dedicated output.
Also there are head units out there that are just "receivers" capable of accepting a digital inputs and outputting 5.1 signal via RCA.
I installed a nexus 7 2013 in my VW, currently using Bluetooth to connect to a receiver where it the outputs to an rca input on my deck that was relocated to my glovebox. I am planning on replacing the Bluetooth adaptor with a USB DAC in order to achieve a higher quality sound.
I am currently doing a similar install in a 2010 charger, a deck will not be used however as I will be using the DAC method with an eq and output to the factory amp. I considered going the android TV box route as I have a MINIX box, but there is some work involved in getting the touchscreen to function properly as it is not set up for this out of the box.
You can purchase a double din deck from eBay (I stumbled across it a few days ago but didn't write the link down) it has a dual os system. It uses android for the car audio function and windows for the car PC function. Not sure how well it works but it got reasonable reviews.
Edit: ...and once again I answer without reading the whole thread...:silly:
Is it somehow easier to get all the various apps on the phone to output audio to a DAC than a USB sound card?
unL33T said:
Is it somehow easier to get all the various apps on the phone to output audio to a DAC than a USB sound card?
Click to expand...
Click to collapse
I believe when the device detects a DAC (must use an otg cable BTW) it automatically re routes all audio out the USB. You can disable automatic USB audio routing in developer settings.
k.s.deviate said:
I believe when the device detects a DAC (must use an otg cable BTW) it automatically re routes all audio out the USB. You can disable automatic USB audio routing in developer settings.
Click to expand...
Click to collapse
That sounds easier. Thanks for the tip.
Well I can't find any information regarding the iPod integration and I've found next to nothing for DVD video and audio CD playback and radio and backup camera functionality would also take some mucking about so it looks like I'd probably be better off buying something like this:
http://www.ebay.com/itm/7-Android-4...621?pt=LH_DefaultDomain_0&hash=item2a31320af5
Which has it all sorted out already. So much for that fun idea. No idea what apps they use for all that stuff.
Which has it all sorted out already. So much for that fun idea. No idea what apps they use for all that stuff.[/QUOTE]
That unit looks slow at only dual-core. It will probably be sluggish when multi-tasking.
The main chip probably supports several I2S devices (aux in/adc, tuner/adc, DVD) and routing plus demuxing is done via linux hardware control.
The DVD player and tuner probably support the i2c or spi protocol to control seeking and other functions. This is again controllable via the linux devices.
Usually the consumer devices don't have these easily exposed and it's probably a non-trivial task to piggyback on existing hardware, assuming the needed connections are broken out on the board. As far as I can see the only Android devices with CD or DVD are the car players like above.
Another option would be to take the sound from the HDMI signal. A DVD player/tuner can be wired in parallel with an HDMI switcher. However controlling the tracks would not be easy, it would require emulating the remote with an IR transmitter.