Develop Bugs

Thread Can Be Closed

Please delete
XDA:DevDB Information
[ROM][7.1.2] crDroid v3.8.5 [UNOFFICIAL][2018-02-28], ROM for the Samsung Galaxy S6
Contributors
enesuzun2002, lukasb06, u99dev, team nexus
Source Code: https://github.com/enesuzun2002
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Marshmallow 6.x
Based On: crDroid
Version Information
Status: Stable
Current Stable Version: First Release
Stable Release Date: 2018-02-28
Created 2018-01-27
Last Updated 2018-03-02

----->Bugs<-----
-Volte
-If You Find Any Report Them Here
Changelog
============
2018-02-28
============
Improved Wifi Performance (Kernel Side)
Fixed Disabling Hardware Keys
Fixed Torch Delay (Flash is now in sync with photo) thanks @lukasb06
Fixed HWC (Games are a lot smoother)
Removed Firefox (For Now)
Added Lawnchair Launcher
Improved Camera Quailty
Enabled Block Based OTA For Faster Flashing (Korean Variants Supported But Needs Testing)
Updated Wifi Blobs (Improved Wifi Stability)
Updated OMX Libraries (Fixed Instagram Stories)
Selinux: Permissive Now
Fixed Cmdline
Improved Speaker Volume
Disabled Scrolling Cache
Updated Nexus Cpu Governor thanks @lukasb06
Added CVE Patches To Kernel thanks @lukasb06
Tweaked Interactive Governor
Tweaked TCP Speed thanks @Noxxxious
Knox 0x0 thanks @lukasb06
Added Maple IOSCHED
State Notifier @neobuddy89
Reduced DPI To 560
---03.02.2018---
Tweaked Kernel For Better Battery Life
Added Gpu Voltage Control
Added Gpu Clock Control
Added Cpu Voltage Control
Much Smoother System Atm
Added Substratum
Added Mozilla Firefox As Default Browser
---02.02.2018----
crDroid Sources Update
Bluetooth Calls Fixed
Tweaked System For Smoother Exprience
Better Battery Life
---30.01.2018----
crDroid Sources Update
Reduced Wakelocks
İmproved Smoothness
Added Pixel 2 Launcher Modded
Added Pixel 2 Bootanimation
Added Pixel Wallpaper
For Full Changelog Check My Github
---28.01.2018----
-crDroid Sources Update
-Whatsapp Voice Recordings Fixed
-Enabled Fade Led All Credits To TeamNexus
-Block Based Ota Disabled Switched To Old Way Of Flashing Now G92xSKL Devices Are Supported To Thanks @Vidhanth
---27.01.2018-2110----
-Switched To OSS Audio Hal (Must Fix Media Playback Issues)
-Switched To Official LineageOS Device Tree
-Added S6 Edge Support (Flash Kernel After Rom)
-Improved Smoothness And Battery Life
---27.01.2018----
-Initial Release

Great work as always, Enes!

niektk said:
Great work as always, Enes!
Click to expand...
Click to collapse
thanks :good:

Good work bro!

Perfect rom!
I have problem - Messenger and Whatsapp callings does not working because interrupts applications.
How to Fix that?
Sorry for my bad language

Firentis said:
Perfect rom!
I have problem - Messenger and Whatsapp callings does not working because interrupts applications.
How to Fix that?
Sorry for my bad language
Click to expand...
Click to collapse
i will release a new build tomorrow with official lineageos tree wait for that

Does it support Dual Sim? The only thing that resists me from flashing any LOS based ROM from this community is that not a single one of them actively supports Dual SIM devices which is really frustrating.

working on Edge devices?
I have G925F.

zinou111 said:
working on Edge devices?
I have G925F.
Click to expand...
Click to collapse
Tomorrow i will send a build for both flat and edge and a edge kernel so you will be able to flash

enesuzun2002 said:
Tomorrow i will send a build for both flat and edge and a edge kernel so you will be able to flash
Click to expand...
Click to collapse
Okay! thanks, and good luck!

Not Bluetooth
Hello Enes
I dont have bluetooth conection in my car....

Suli82 said:
Hello Enes
I dont have bluetooth conection in my car....
Click to expand...
Click to collapse
any logcat?

enesuzun2002 said:
any logcat?
Click to expand...
Click to collapse
My Galaxy G920F can not find a Bluetooth connection to my car (Mitsubishi Outlander 2016).

new update online

next build have whatsapp voice recordings fixed thanks @U99Dev and @Vidhanth

The sound quality is horrible. Other than that I don't see any major flaws.

Is 4K Video Recording working?

Instructions for S6 edge users?

zinou111 said:
Instructions for S6 edge users?
Click to expand...
Click to collapse
Exactly the same for s6 except you need to flash the kernel after installing the Rom.

LineageOS 14.1 | 27.11.2019 | Shield blobs EOL

LineageOS 14.1​
FOR ROMS RELEASED BEFORE NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
Instruction
1) flash BootBlobs-SHIELD-mocha.zip
2) reboot to recovery
3) install this recovery
4) reboot to recovery
5) install the ROM
FOR ROMS RELEASED AFTER NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
3) BRAIN, READING SKILL and presence of basic knowledge about firmware (in the absence need learn to independently)
Instruction
1) download TosForPSCI-0.1.zip
2) unzip TosForPSCI-0.1.zip
3) download recovery-03.11.2018
4) go to fastboot mode
5) execute command: fastboot flash tos your path to tos.img
6) execute command: fastboot flash recovery your path to recovery-03.11.2018.img
7) reboot to new recovery(u can execute fastboot reboot holding vol+ button)
8) if you are on previous LineageOS 14.1 build then you may install the ROM without wipes. If you're not, make full wipes then
9) install current LineageOS 14.1 build
10) reboot to the system
Sources
Device
Kernel
Vendor
Changelogs
27.11.2019
system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area
kernel:
- reconfigured Quick Charge mode(9V 2A)
28.10.2019
system:
- the latest security patch by LineageOS team
- Trebuchet replaced by Launcher3
kernel:
- all changes since release in December 2018
28.12.2018
system:
- the latest security patch
kernel:
- a little bit updated sdcardfs
- fixes of defects after switching to the new Synaptics touchscreen driver
03.11.2018
system:
- the latest security patch
- added tile for activatingdeactivating battery charging
kernel:
- new Synaptics touchscreen driver(possibly less lags)
- a little bit updated sdcardfs
- fixed a couple of security issues when using root
- PSCI downgraded to version 0.1
28.09.2018
system:
- the latest security patch
kernel:
- reworked binder driver(the system should be more stable)
19.08.2017
system:
- the latest security patch
kernel:
- dvfs driver was heavily updated(better power consumption)
- binder was updated
- therm_est thermal sensor was fixed
24.07.2018
system:
- source code was updated
- changes for devices with 3Gb RAM
kernel:
- added new driver(written by me) for reducing cpu power consumption in suspend mode.
- panel driver was changed for reducing power consumption in suspend mode
- palmas gpio driver was changed for reducing power consumption in suspend mode
18.06.2018
system:
- source code was updated
kernel:
- spectre patch by nvidia
- other small changes
21.05.2018
system:
- source code was updated
- usb internet sharing was fixed
- other small changes
kernel:
- sdcardfs was updated to the 3.18 kernel level.
- ability to change display colors was added
14.04.2018
system:
- sdfat was added(instead of vfat and exfat)
- audio HAL was updated(like in 15.1)
- 64-bit binder was returned
kernel:
Los14.1 and Los15.1 use an unified kernel for now. All updates from 15.1 are inside.
16.03.2018
kernel:
- usb otg for flash drives was fixed
- problems with battery percentages was fixed
09.03.2018
kernel:
- based on official rel-24-uda-r1 branch
- updated binder
system:
- we are using 64-bit binder for now
- updated sources
Broken:​- Cameras
Download:​Touchscreen hotfix for ROM released at 29.12.2018
ROM folder
Last build
XDA:DevDB Information
LineageOS 14.1, ROM for the Xiaomi Mi Pad
Contributors
Artemka2008
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2018-10-05
Last Updated 2020-03-09

27.11.2019
system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area
kernel:
- reconfigured Quick Charge mode(9V 2A)
What is "tile for activating\deactivating battery charging"?
- this is system icon(like performance profiles) which permits\prohibits the supply of current to the battery at the time when the charger is connected.
Why do we need that tile?
- if you play, watch a movie or perform another costly action, then activating this mode will save the battery from unnecessary wear because energy will go directly from the charger. But you need a fairly powerful charger, if the power of the charger is not enough, then partially the consumption will be compensated by the battery.
What happens if you do not install TosForPSCI-0.1?
- at best, only one CPU core will be active. At worst, the recovery will not be started (if it has not been updated too) and the system too.
How to roll back on the firmware version, which came out before November?
- download TosForPSCI-0.2 and recovery. You'll be able to flash older ROMs after installing them
Why do I need to lower the PSCI version from 0.2 to 0.1?
- Using version 0.1 fixes a problem with shutting down a device.

Finally!an XDA thread.big thanks to Artemka2008

finally on xda thread!!big thanks to this rom contributor.
Best Rom for mi pad 1,dirty flash from previous build,works like a charm

Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.
I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.

Tautologica said:
Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.
I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.
Click to expand...
Click to collapse
i lost 4-5% around 9 hours deep sleep mode with wifi turned off + greenify
thats pretty good i guess

Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .

pussel said:
Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .
Click to expand...
Click to collapse
Your battery is not calibrated.use any app or fully discharge and charge to 100% 2 or 3 times and this will be fixed.issue and remedy common with new rom flash

hello,my battery is jump to 0 from 30-40

I've been on update 8 (2018/06/18) for months and Mipad finally stuck at LOS logo. Please tell me why.
Clean install (update 11) done, the issue's still there after a couple of days. Actually, I only need to do factory reset to fix this.

Hi guys, any news about camera patch?
Thanks ?

velociraptor68 said:
Hi guys, any news about camera patch?
Thanks
Click to expand...
Click to collapse
Forget about cameras

Why? ?

velociraptor68 said:
Why?
Click to expand...
Click to collapse
Because

Artemka2008 said:
Because
Click to expand...
Click to collapse
Eh eh eh ? the lineageos 14 alpha version rom 2017 have camera support... this rom not. We can take camera module from that rom? ?

velociraptor68 said:
Eh eh eh the lineageos 14 alpha version rom 2017 have camera support... this rom not. We can take camera module from that rom?
Click to expand...
Click to collapse
Stop writing stupid things pls

stupid me who doesnt read helps you guys to test what will happen if dont install the TOS patch...
it will install and boot without any issue... BUT if it is not connected to charger and once you off the screen, it turns off.
I tot my battery is dead but then I go back and read the whole thread again then realize there is a new instruction for installing new ROM... so guys... please read the whole thread next time... haha...
different device might have different results but this is what happen to mine...
---------- Post added at 01:17 PM ---------- Previous post was at 01:00 PM ----------
I found the on-screen navigation toggle (under button right?) is missing. Is it being removed in the latest version or i mess something up again? FYI, i did a clean install.

Hi, I installed last rom 03.11.2018, it is very smooth. I try to record audio by microphone, but don't work... instead google assistant understand my voice.
Thanks

I would like to try this ROM, does it have gapps and root already integrated?
Let me answer my question: no, gapps and root need to be installed separately.
This ROM is wicked fast and smooth!

Im in AOSP extended oreo right now. Can i install this rom directly?

Norma_Emasry266_ v1

​Welcome to Norma_Emasry266 S9/S9+ ROM For Galaxy S7/S7E​Principal Features
- full port S9+ G9500 (Chinese Base)
- Stable and Faster
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Moro kernel4.6, init.d and battery tweak
- Multiple Languages and downloadable keyboard languages
Base Features :-
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, don't just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
What are we made?
1 - All Chinese applications cleared of ٌRom
2 - Rom tested on the anti - virus and is completely free of any problems
3. All Chinese words have been translated
4. Custom settings have been translated
5-Many new pi applications have been added
6-. System ui modifications
7- Modifications to custom settings
8- Adding csc files to all countries
9- Translation of the Aroma
10-Google services have been added
11-. There is a lot I do not remember now
Bugs
- None
Installation Steps
● Make sure you have T.W.R.P installed.
● Make sure your phone is fully charged to 100%.
● Download the rom using download manager like (IDM,ADM for android)
● Copy rom zip to your ExtSD.
● Open T.W.R.P and perfrom these wipes (Internal memory,system,data,dalvik,cache)
● Flash the rom.
● In aroma select full wipe too.
● Do the aroma setup.
● Let the rom boot.
● Once rom boots leave it to settle for 5-10 min
● If you selected magisk in aroma you will need to do 2 reboots.
● Do the setup and download your apps.
● I highly recommend not to restore apps via T.B or any backup app. download them from store.
● Update all system apps from google and Samsung stores.
● Enjoy the rom.
MoRoKernel S7, Kernel for the Samsung Galaxy S7 Edge
Contributors
morogoku
Source Code: https://github.com/morogoku/MoRoKernel-S7-Nougat
moro kernel link
https://androidfilehost.com/?w=files&flid=270747
download link
uploading
screenshot
XDA:DevDB Information
Rom_norma_emasry266 S9+ port , ROM for the Samsung Galaxy S7
Contributors
emasry266
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 3.x
ROM Firmware Required: S9+
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-11-07
Created 2018-11-06
Last Updated 2018-11-06

First. Let me try.
Sent from my SM-G935F using Tapatalk

This rom is based on oreo?

ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
seems legit

jaydee1986 said:
seems legit
Click to expand...
Click to collapse
Honestly that would be cool tho

Deleted
---------- Post added at 05:42 AM ---------- Previous post was at 05:42 AM ----------
emasry266 said:
Welcome to Norma_Emasry266 S9/S9+ ROM For Galaxy S7/S7E
Principal Features
- full port S9+ G9500 (Chinese Base)
- Stable and Faster
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Moro kernel4.6, init.d and battery tweak
- Multiple Languages and downloadable keyboard languages
Base Features :-
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, don't just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
What are we made?
1 - All Chinese applications cleared of ٌRom
2 - Rom tested on the anti - virus and is completely free of any problems
3. All Chinese words have been translated
4. Custom settings have been translated
5-Many new pi applications have been added
6-. System ui modifications
7- Modifications to custom settings
8- Adding csc files to all countries
9- Translation of the Aroma
10-Google services have been added
11-. There is a lot I do not remember now
Bugs
- None
Installation Steps
● Make sure you have T.W.R.P installed.
● Make sure your phone is fully charged to 100%.
● Download the rom using download manager like (IDM,ADM for android)
● Copy rom zip to your ExtSD.
● Open T.W.R.P and perfrom these wipes (Internal memory,system,data,dalvik,cache)
● Flash the rom.
● In aroma select full wipe too.
● Do the aroma setup.
● Let the rom boot.
● Once rom boots leave it to settle for 5-10 min
● If you selected magisk in aroma you will need to do 2 reboots.
● Do the setup and download your apps.
● I highly recommend not to restore apps via T.B or any backup app. download them from store.
● Update all system apps from google and Samsung stores.
● Enjoy the rom.
MoRoKernel S7, Kernel for the Samsung Galaxy S7 Edge
Contributors
morogoku
Source Code: https://github.com/morogoku/MoRoKernel-S7-Nougat
moro kernel link
https://androidfilehost.com/?w=files&flid=270747
download link
uploading
screenshot
XDA:DevDB Information
Rom_norma_emasry266 S9+ port , ROM for the Samsung Galaxy S7
Contributors
emasry266
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 3.x
ROM Firmware Required: S9+
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-11-07
Created 2018-11-06
Last Updated 2018-11-06
Click to expand...
Click to collapse
Rom OS version info is wrong.

This post is correct or incorrect ??

@emasry266 please let me know when you`re ready to link the files for download until then, in order to avoid "where is the link ?" questions, this thread will stay closed
thanks !

Marvel OS Q Port V-2 For J7-2016

--------Marvel OS V-2 By AL-Noman------
NOTE - THIS ROM IS ONLY FOR J7-2016
--- Some Information ---
Based On : Galaxy J600GD
Android Version : 10 . 32 Bit
One Ui Version : 2.0
---------- Rom Features ----------
-- Debloated
-- Deknoxed
-- Half Deodexed
-- All Stock Features Like As Wifi,Camera
,Bluetooth,Double Sim Is Working.
-- Added Missing Important Application
-- Applock
-- S Secure
-- Call Record Supported
-- Game Tools Working
-- Latest Camera Features
-- Camera Watermark Support
-- Camera Screen Optimization
-- Camera Shot Suggestions
-- Camera Flaw Detection
-- Camera 2× Zoom
-- Camera Food Mode
-- Rear Camera Selfie
-- Screenshot On Toggle
-- Smart Capture
-- Screen Recording On Toggle
-- Lte Only Option
-- Lte On 4G network Is Enabled
-- New Font
-- Samsung Face Unlock
-- Added Samsung HoneyBoard
-- Adb Enabled
-- FRP Lock Removed
-- Root Supported
-- Stable Magisk 20.3 Included
-- Disable signature verification allowing
modification/execution of signed system apps.
-- Bypass Samsung Knox trip protection, only
confirmed working for secure folder.
-- Support Secure Folder
-- Added Multi Omc - Auto Generated By Default
Mps Code
-- Language Pack For Keyboard
-- Patced Dual Messenger
-- Charging Info Showing On Lock Screen .
-- Multi Screen Mode
-- Lock Screen Stories
--Places Option On Dial Menu
--Caller ID And Spam Protection
--Mobile Data Switch Menu On Power Option
--VoLte For Bangladesh
--Date Of First Call Made Option On Settings
--Third Party Camera Working
-- More OMC Feature ..
--------- Whats new on Version -2
--- Fixed Bluetooth
--- Fixed Camera
--- Third Party Camera Working
--- Multi Omc
--- More Feature
--- Kernel Information ---
-- Name : Simple Kernel By Astrako
-- Bluetooth Patch Credit :
https://forum.xda-developers.com/m/astrako.6917540/
---- Dontation ----
Donation Is Required But Not For Me. If You Fill Good After Use My Rom Then Please Help Helplessness People
---- Marvel OS Telegram Group---
Flame OS Development
অ্যানড্রইড কাস্টম রম পোর্ট
t.me
---- Rom Link ---
https://mega.nz/file/B1NSVRoJ#ZbSgyXF0BgTb0mcfKc1iCMqt834-1uyiTQDDQ9_do7w
XDA:DevDB Information
Marvel OS Q Port V-2 For J7-2016, ROM for the Samsung Galaxy J7
Contributors
Abdullah AL-Noman
forum.xda-developers.com
Astrako
forum.xda-developers.com
Source Code:
GitHub - samsungexynos7870/android_kernel_samsung_exynos7870
Contribute to samsungexynos7870/android_kernel_samsung_exynos7870 development by creating an account on GitHub.
github.com
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Bootloader
Version Information
Status: Stable
Created 2020-10-19
Last Updated 2020-10-19

How to install this ?

Is capacitive touch light working in J710FN With this Rom?

AndroMor said:
Is capacitive touch light working in J710FN With this Rom?
Click to expand...
Click to collapse
theres no capacitive lights in all j710 lol

Google Drive link plis?

Hello @Abdullah AL-Noman
for the OP post this could be the best candidate for my 710MN. but I wonder if the NFC and Screen Mirroring (or Miracast) works in this rom?. Great work. Regards from Argentina

Screen turns black when I restart phone, j7 2016
---------- Post added at 10:51 PM ---------- Previous post was at 10:38 PM ----------
umutaykn said:
Screen turns black when I restart phone, j7 2016
Click to expand...
Click to collapse
I re-installed rom and fix this

pls, post the google drive link... i can't download in mega

Phone keeps restarting

hi
Why 32bit?

Hi, I installed this rom a few days ago and my phone started to reboot randomly. I have an j710FN model device and I would like to know how can I fix the reboot problem.

perfect

there's no written anywhere, but it needs vendor partition. without that, phone goes to download mode. i put project treblue in. after all it works even i got the safenetynetcheck failed, both basicintegrity and cts profile, googleplay store says "certified device" :O
bluetooth calls dont work, fm radio neither.

hi, what to do if i change custom rom and marvel os boot screen is still there?

hi, how to restore original boot logo instead of the marvel os one? i flashed original stock rom with odin but boot logo keeps being "Marvel OS"

murandoich said:
hi, how to restore original boot logo instead of the marvel os one? i flashed original stock rom with odin but boot logo keeps being "Marvel OS"
Click to expand...
Click to collapse
i found it, thx anyway
Post in thread 'Original bootlogo J7 (6) request.' https://forum.xda-developers.com/t/original-bootlogo-j7-6-request.3682843/post-74015263

Plz anyone tell me how to install step by step this rom on j7 16 with working links thank you

Marvel OS J6-Q Port V-2 For J730X By AL-Noman

--------Marvel OS V-2 By AL-Noman-----------
NOTE - THIS ROM IS ONLY FOR J730X - J7 Pro .
--- Some Information ---
Based On : Galaxy J600GD
Android Version : 10 . 32 Bit
One Ui Version : 2.0
---------- Rom Features ----------
-- Debloated
-- Deknoxed
-- Odexed
-- All Stock Features Like As Wifi,Camera ,Bluetooth,Double Sim Is Working.
-- Added Missing Important Application
-- Applock
-- S Secure
-- Call Record Supported
-- Now Game Tools Working without navigation bar
-- Latest Camera Features
-- Camera Watermark Support
-- Camera Screen Optimization
-- Camera Shot Suggestions
-- Camera Flaw Detection
-- Camera 2× Zoom
-- Camera Food Mode
-- Rear Camera Selfie
-- Screenshot On Toggle
-- Smart Capture
-- Screen Recording On Toggle
-- Lte Only Option
-- Lte On 4G network Is Enabled
-- New Font
-- Samsung Face Unlock
-- Added Samsung HoneyBoard
-- Added Emoj support on keyboard
-- Adb Enabled
-- FRP Lock Removed
-- Root Supported
-- Stable Magisk 20.3 Included
-- Fixed Dpi
-- Fixed High Sound
-- Support Secure Folder
-- Added Multi Omc - Auto Generated By Default Mps Code
-- More omc features.
-- Language Pack For Keyboard
-- Patced Dual Messenger
-- Charging Info Showing On Lock Screen .
-- Multi Screen Mode
-- Lock Screen Stories
-- Places Option On Dial Menu
-- Caller ID And Spam Protection
-- Mobile Data Switch Menu On Power Option
-- VoLte Working For Bangladesh
-- Date Of First Call Made Option On Settings
-- Third Party Camera Working
-- Removed navigation bar option from settings.
-- Added multi window - Credit - el0xren
-- Dolby support on speaker.
-- Removed Google and Samsung apps permission to run background on power saver and use internet on data saver
-- You can stop some apps background working like google play services and Samsung apps
-- Added Galaxy A6 Overlay
-- Remove automatic message sent from device to custom care. This must stop money cutting from automatic message sending.
- Third Party Camera Working Fine
- Fixed Sound
- Fixed FM Radio Also
--- Kernel Information ---
-- Name : Simple Kernel
- -----Note - You can use Pruh Kernel V-5 Power Saver Version For Saving Battery And Better Charging.
---- Dontation ----
Donation Is Required But Not For Me. If You Fill Good After Use My Rom Then Please Help Helplessness People
-- For Any Help Join US On Telegram Group --
https://t.me/smexynos7870
--- Rom Download Link - Google Drive -
https://drive.google.com/file/d/1-6vyu9qvp0k5Wuiu3spULWnJPZffQS8S/view?usp=drivesdk
XDA:DevDB Information
Marvel OS J6-Q Port V-2 For J730X By AL-Noman, ROM for the Samsung Galaxy J7 (2017)
Contributors
Abdullah AL-Noman, Astrako
Source Code: https://github.com/Astrako/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Minimum Oreo Bootloader
Version Information
Status: Stable
Created 2020-11-17
Last Updated 2020-11-17

@Abdullah AL-Noman
Thanks for this ROM
If possible Port Android 11

Manque widgets meteo
Merci

hacker812c said:
@Abdullah AL-Noman
Thanks for this ROM
If possible Port Android 11
Click to expand...
Click to collapse
Installations steps please

Sanum123 said:
Installations steps please
Click to expand...
Click to collapse
Hi Sanum123 to instal Marvel os v-2 you dont need to create vendor(64bits) because its a 32 bits_blinder64 and works on j7 2017 official vendor .
installation steps
1.install TWRP or Ofox recovery ;
2.Move this room to your SD card or internal storage (not recomanded);
*if you created a 64 bits vendor you need to revert it back to 32 bits ;
3.clear data , system,vendor,dalvik /cache , not the sd card , its recomanded to delete also internal storage*.
4.Go to instal and select sd card->and instal Marvel OS V-2.zip
5.after that whait until the os boot success(this will take 3-8 minutes in general)
6.That it you have a android 10 32 bits room.

Am from India ..if i use this rom should volte work or not ..I mean am using jio sim will it work for call and sms ..and plz provide link for pruh kernel

failed to mount vendor? ofw j730F

casanova12 said:
failed to mount vendor? ofw j730F
Click to expand...
Click to collapse
That's normal, this rom is 32bit not 64, don't need vendor partition.

ahmdnz7797sy said:
That's normal, this rom is 32bit not 64, don't need vendor partition.
Click to expand...
Click to collapse
But i cant wipe vendor. Vendor unmounted

casanova12 said:
But i cant wipe vendor. Vendor unmounted
Click to expand...
Click to collapse
Sure you can't wipe or mount, there is no vendor partition at all, Because this rom is 32bit.

casanova12 said:
But i cant wipe vendor. Vendor unmounted
Click to expand...
Click to collapse
if your vendor will wiped, this rom cant be run on your device.

alwoys on display how add?

Abdullah AL-Noman said:
--------Marvel OS V-2 By AL-Noman-----------
NOTE - THIS ROM IS ONLY FOR J730X - J7 Pro .
--- Some Information ---
Based On : Galaxy J600GD
Android Version : 10 . 32 Bit
One Ui Version : 2.0
---------- Rom Features ----------
-- Debloated
-- Deknoxed
-- Odexed
-- All Stock Features Like As Wifi,Camera ,Bluetooth,Double Sim Is Working.
-- Added Missing Important Application
-- Applock
-- S Secure
-- Call Record Supported
-- Now Game Tools Working without navigation bar
-- Latest Camera Features
-- Camera Watermark Support
-- Camera Screen Optimization
-- Camera Shot Suggestions
-- Camera Flaw Detection
-- Camera 2× Zoom
-- Camera Food Mode
-- Rear Camera Selfie
-- Screenshot On Toggle
-- Smart Capture
-- Screen Recording On Toggle
-- Lte Only Option
-- Lte On 4G network Is Enabled
-- New Font
-- Samsung Face Unlock
-- Added Samsung HoneyBoard
-- Added Emoj support on keyboard
-- Adb Enabled
-- FRP Lock Removed
-- Root Supported
-- Stable Magisk 20.3 Included
-- Fixed Dpi
-- Fixed High Sound
-- Support Secure Folder
-- Added Multi Omc - Auto Generated By Default Mps Code
-- More omc features.
-- Language Pack For Keyboard
-- Patced Dual Messenger
-- Charging Info Showing On Lock Screen .
-- Multi Screen Mode
-- Lock Screen Stories
-- Places Option On Dial Menu
-- Caller ID And Spam Protection
-- Mobile Data Switch Menu On Power Option
-- VoLte Working For Bangladesh
-- Date Of First Call Made Option On Settings
-- Third Party Camera Working
-- Removed navigation bar option from settings.
-- Added multi window - Credit - el0xren
-- Dolby support on speaker.
-- Removed Google and Samsung apps permission to run background on power saver and use internet on data saver
-- You can stop some apps background working like google play services and Samsung apps
-- Added Galaxy A6 Overlay
-- Remove automatic message sent from device to custom care. This must stop money cutting from automatic message sending.
- Third Party Camera Working Fine
- Fixed Sound
- Fixed FM Radio Also
--- Kernel Information ---
-- Name : Simple Kernel
- -----Note - You can use Pruh Kernel V-5 Power Saver Version For Saving Battery And Better Charging.
---- Dontation ----
Donation Is Required But Not For Me. If You Fill Good After Use My Rom Then Please Help Helplessness People
-- For Any Help Join US On Telegram Group --
https://t.me/smexynos7870
--- Rom Download Link - Google Drive -
https://drive.google.com/file/d/1-6vyu9qvp0k5Wuiu3spULWnJPZffQS8S/view?usp=drivesdk
XDA:DevDB Information
Marvel OS J6-Q Port V-2 For J730X By AL-Noman, ROM for the Samsung Galaxy J7 (2017)
Contributors
Abdullah AL-Noman, Astrako
Source Code: https://github.com/Astrako/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Minimum Oreo Bootloader
Version Information
Status: Stable
Created 2020-11-17
Last Updated 2020-11-17
Click to expand...
Click to collapse
its like crispy when flashed
volte and fm radio works
fm radio low on signal reception
call dropping
Thank you for the hard work

ahmdnz7797sy said:
Sure you can't wipe or mount, there is no vendor partition at all, Because this rom is 32bit.
Click to expand...
Click to collapse
Any way to mount or flash 32bit vendor??

leeyog said:
Any way to mount or flash 32bit vendor??
Click to expand...
Click to collapse
Vendor doesn't exist in 32bit roms

ahmdnz7797sy said:
Vendor doesn't exist in 32bit roms
Click to expand...
Click to collapse
So wat is the procedure to install again after wiping vendor system internal storag, Plz do help stuck on this

leeyog said:
So wat is the procedure to install again after wiping vendor system internal storag, Plz do help stuck on this
Click to expand...
Click to collapse
You don't have to wipe vendor,
Install steps:
Twrp 3.4 or 3.5
Wipe system, data and 2 caches
Flash rom
That's all
no create vendor, if already have vendor, revert it.

Does it have AOD?

Screenshots

Is this rom still working