Develop Bugs

[Q] Trouble Upgrading HBOOT from 0.43 to 1.39

EDIT: All fixed - I tried a couple of different versions of CWM and was able to flash a rom.
Hi,
I have been trying to update my hboot to 1.39 from 0.43. I have followed all of this tutorial here http://www.guidingtech.com/19930/install-jelly-bean-rom-htc-one-x-upgrade-hboot-unlock/ .
This involved Relocking the device and flashing the correct firmware for my CID (T-MOB005). My bootloader now says I have HBOOT 1.39. I tried to flash the RUU, RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed. I extracted the rom but when I flash it I get this output:
Code:
➜ htc sudo fastboot flash zip ~/rom.zip
sending 'zip' (618866 KB)...
OKAY [ 73.152s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) Your memory size = 29820MB, choose rawpt_32g.img
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 101.400s
When I try and boot I still get the CM10 loading image, so seems like it hasn't flash RUU at all.
Is anyone able to help me out at all with what I should/need to do?
Many thanks,
Ash
EDIT: Here is a getvar all if it helps
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.163R.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) serialno: HT23RW109199
(bootloader) imei: 359188041869876
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4180mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
EDIT: I have now been able to iinstall CWM recovery. I have some how managed to wipe my system (do'h!). When I tried to mount USB Storage (so that I can flash a rom), I get this error:
Code:
E:Unable to open ums lunfile (No such file or di

Finally somebody who fixed his own problem !!! :thumbup:
Cheers

[Q] Issues with RUU

I'm getting an error when trying to flash this RUU to my HTC One. What am I doing wrong?
C:\Users\cameron.calvert\Downloads\HTCOneToolkit2.1>fastboot flash zip PN07IMG_M
7_WL_JB_50_VZW_422_VERIZON_WWE_1.10.605.15_Radio_1.12.42.1104_NV_VZW_3.71_002_re
lease_340295_signed_2.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1178525 KB)...
OKAY [ 52.360s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 186.571s
Here is what I have on my phone currently.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.12.41.1112_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.605.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3CGS901516
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4219mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-3c88cdd7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

ccsoccer03 said:
I'm getting an error when trying to flash this RUU to my HTC One. What am I doing wrong?
Click to expand...
Click to collapse
It looks like you're trying to downgrade to an earlier version. That won't work on an s-on phone.

M8 GPE stuck on bootloader

Hi everybody
I have a M8 GPE unlocked/un-rooted/s-on with stock 4.4.4 and today i said that I will not wait for the OTA to come, and decided to flash it myself.
When going to recovery i saw that there is no option to adb sideload a file, strange, so I booted in TWRP (not flashed) and tried to sideload from there. I could not make the ADB sideload work in TWRP also because of some errors, and I tried the install zip option. When flashing the OTA zip I got an error saying that the required version is *4.4.4* and that i had *4.4.2*. I know for sure that I had 4.4.4 because i got the update myself and apply it automatically from within android.
Trying to do a factory reset in TWRP in order to try again the OTA zip file, i wiped the system partition (my bad) and since then i am stucked in bootloader/recovery without any way to boot into OS.
I tried to reboot into RUU and flash RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5.zip, but i get the error (probably because i am s-on):
Code:
target reported max download size of 1830617088 bytes
sending 'zip' (635732 KB)...
OKAY [ 26.906s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 27.080s
Anybody can tell if there is any way to flash the stock image on the phone?
As I understood I could do s-off only from OS, and for me that ism not possible
Thanks for the help in advance,
galiganu
Code:
platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.14.21331931.LA02_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.12.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s

I just read that in order to flash back the stock rom i have to be locked, so i did fastboot oem lock. Tried to flash the RUU image and i get this:
Code:
platform-tools>fastboot flash zip RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5.zip
target reported max download size of 1830617088 bytes
sending 'zip' (635732 KB)...
OKAY [ 26.190s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 56.180s
Any ideas?

Same error as above i get with RUU-HTC_One_M8_GPE_4.4.3-2.10.1700.4.zip and RUU-HTC_One_M8_GPE_4.4.4-2.12.1700.1.zip.

hi guys, no idea about my issue?

i managed to install CM11 in the end... at least i can use the phone until i figure out how to get back to stock gpe

solution here thanks to ckpv5
http://forum.xda-developers.com/showpost.php?p=57398166&postcount=3274

Fastboot help please :(

Just solved one problem with the drivers, now the fastboot prompt tell me, the signature checking failed..
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 56.279s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 117.986s
I have locked my bootloader and tried to flash a "signed" fw.. tried it from 2 sources. Also tried to flash a recovery. Nothing worked..
Edit: As an act of last hope I "reopened" my bootloader. That way I was able to get into twrp and flash a ROM after a wipe. Now I can use at least my Smartphone again. But of course it would be great to know what I did wrong..
GetVar All gave me this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.063s
The Bootloader said "relocked". It still did not work.

[HELP] My Htc one M8 phone will not boot.

hello, i'm new to this site and to rooting. I believe i tried to root this phone probably a good 3 years ago and failed, so i left it. i cant remember exactly what failed. but now my htc one m8 will not boot, however I can access the basic recovery however i can not factory reset it from here. just swaps to the htc logo. I can not flash TWRP or any type of recovery, it is unlocked and s-on. here is my error when i try and flash the recovery:
Invalid sparse file format at header magic
Sending sparse 'recovery' 1/2 (16380 KB) OKAY [ 1.710s]
Writing sparse 'recovery' 1/2 FAILED (remote: image error! (BootMagic check fail))
Finished. Total time: 1.898s
i don't know any other information i should give in this post ill try my best and give any info required, i just dont know what is., I deeply appreciate any effort in getting my device back up and running

heres more info
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.11.161.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0b9a12e3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001

pmccaul1410 said:
Writing sparse 'recovery' 1/2 FAILED (remote: image error! (BootMagic check fail))
Click to expand...
Click to collapse
You have the M8s variant. Are you flashing the TWRP version specific to the M8s? It is required, as the TWRP for the "standard" M8 will not work (and probably the reason for the error message).
See the M8s section for more info, the right TWRP version, etc: https://forum.xda-developers.com/htc-one-m8/one-m8s-general

hi, thanks for taking the time to help me out. i flashed the recovery from there and got a different error
target reported max download size of 16773120 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 4941824 is not a multiple of the block size 4096
sending sparse 'recovery' (16379 KB)...
error: write_sparse_skip_chunk: don't care size 4941824 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 4941824 is not a multiple of the block size 4096
OKAY [ 1.827s]
writing 'recovery'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 1.845s