Develop Bugs

ROM UPDATED May 19, 2015 [ROM] LP 5.1 Resurection-Remix Hardened Unofficial

Rom updated on May 19. This is LP 5.1 release 2. Latest Google/CM/Resurrection sources + all hardened features. Plus cleaned IP addresses (got rid of Google, Level 3 communication, AT&T, Orange, Department of Defense and other shady ips). Also enabled is Volte (enhanced LTE), which is Voice over LTE. This depends on the service provided by your carrier. In the States, for example, T-Mobile provides such services, which include high definition voice. Usually, you need special update done by the manufacturer in conjunction with your carrier. This rom does not need that. Your Z1 is already provisioned for Volte. You will see in Mobile Settings another entry: Enhanced 4g LTE Mode. ALso, in test menu/phone (*#*#4636#*#*), you will see a Volte Provisioned Flag. So, as soon as your carrier starts Volte, you are all set.
Sources are the same...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12531
_____________________________________________________________________________________
Rom updated to latest sources on May 4. In addition to regular hardened features, more than 40 instances of Google IP, Level 3 Communication and Department of Defense IPs removed from sources both for IPV4 and IPV6. The same is replaced with Opendns IP. Keep in mind that those ips go not only in configuration files, but libs also and the latter cannot be decompiled and fixed...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=12289
______________________________________________________________________________________
Rom Updated to LP 5.1.1. All hardened/security features implemented. Kernel used from Slimroms 5.1.
TWRP 2.8.6 is integrated in kernel.
Obviously, this is an alpha version...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12110
Kernel Source: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
___________________________________________________________________________________________________
Rom updated to 5.1: all hardened features enabled.
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=11901
___________________________________________________________________________________________________
March 31: kernel updated to include screen color calibration:
See Download link: http://forum.xda-developers.com/showpost.php?p=59801528&postcount=94
_________________________________________________________________________________________________
March 27: New build is up, latest CM and Resurect changes; kernel includes voltage table, syncookie and TWRP.
Download Link: http://d-h.st/lw2s
Mirror Link: http://forum.xda-developers.com/devdb/project/dl/?id=11744
_________________________________________________________________________________
March 15: New build is up including latest sources, TWRP integrated in kernel, led lights fixed
DOWNLOAD LINK: http://d-h.st/UO7W
_______________________________________________________________________________________________
Marchh 7: Rom Updated to the latest version + plus all security enhancements. Sources for security changes are the same as posted
See Download section for update
Here is Resurection Remixed Lollipop hardened and secure. Built from sources on February 24.
Changes:
First of all, as many know, encryption on lollipop slows down the device to almost unusable. I was able to resolve that. The culprit was Qualcom crypto module and drivers that collide with graphics. In this rom, when you encrypt your device, there is no noticeable slow down at all. Your master encryption key is no longer stored in crypto module (which rumor has it is backdoored anyway), but rather hashed and salted on the drive itself.
1. Modified kernel to disable creepy SElinux and enable Tomoyo security. Now you can safely use Xposed framework and some modules such as Xprivacy, Appsettings and ShowDialpad, as well as many others
2. Modified kernel to disable qualcom module and drivers
3. Disabled creepy qualcom random number generation and enabled all other methods
4. Enabled 256 bit AES drive encryption as opposed to Google's default 128 bit
5. Enabled all ciphers and hashes available in kernel and disabled by default (thanks Sony and Google)
6. Latest CM changes
7. Omniswitch (to be flashed separately after flashing the rom)
Maybe more
INSTALL:
1. Be on Kitkat, rooted with CWM or TWRP
2. Enter Recovery, wipe System, Data, Cache
3. Flash the rom
4. Flash Omniswitch
5. Reboot and enjoy
If you want to encrypt your device, you need to do 2 additional steps before or after encryption. Go to Developer Options and enable "Force GPU rendering" and "Disable HW overlays. Yes, you have to enable (not disable) "Disable HW overlays" option. The latter won't stick after reboot. So, manually transfer the attached init.d script to /system/etc/init.d and set permissions to at least 744. This way the option will be set at boot and you won't have any noticeable slowdown. In fact, I don't see any difference in speed between encrypted and non encrypted device.
CREDIT: Resurection-Remix Team, Cyanogenmod, AOSP and Omniroms
WARNING:
I am not responsible if your device explodes and kills everyone around. You are doing it on your own. Russians, who are definitely coming, won't help you either :laugh:
Download links
Rom: http://d-h.st/l1rB For Update see Download Section
Omniswitch: http://d-h.st/AbGH
Init.d script (in case you want to encrypt your data): http://d-h.st/QIiE
Sources: https://github.com/ResurrectionRemix
https://github.com/HonamiZ1/android_system_vold
https://github.com/HonamiZ1/kernel_sony_msm8974
XDA:DevDB Information
Resurection-Remixed Lollipop 5.1.1 Hardened, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, Cyanogenmod
Version Information
Status: Testing
Created 2015-02-25
Last Updated 2015-05-19

screenshots
Screenshots added

Kernel updated with CPU voltage table
Kernel updated to allow under/over volting. See attachment.
Instructions:
1. Unzip the file
2. Flash in fastboot: fastboot flash boot boot.img and fastboot reboot
Enjoy

Thanks for this ROM, are there any known bugs?

wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
All CM bugs as of February 24. You can go on their site and see the list of changes...

optimumpro said:
All CM bugs as of February 24. You can go on their site and see the list of changes...
Click to expand...
Click to collapse
So just need to look at http://forum.xda-developers.com/xperia-z1/general/rom-official-cyanogenmod-12-nightlies-t3007118 is that right?
Sorry I have to confirm, there are multiple threads (Official/Development) for CM12.
This ROM will maintain root and recovery, right?
I'll flash and let you know if I find any other issues.

Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.

Kyrius said:
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Click to expand...
Click to collapse
I use Textsecure as sms replacement. Microphone works great...

Very buggy
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE

darkdevu said:
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
Click to expand...
Click to collapse
1. Learn the rule about not posting bug reports without logcat
2. Camera works fine: verified
3. Always wipe System/Data/Cache before flashing
4. Are you sure you have Xperia Z1?
Cheers

his profile says Z3. lol

Any further reports on this ROM? Interesting to know how it performs and about stability

Deleted

wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
Rom Updated to the latest version. See Download section in the OP.

and where is the link to the update?

shikimafia said:
and where is the link to the update?
Click to expand...
Click to collapse
It is in Download section:
http://forum.xda-developers.com/devdb/project/?id=8412#downloads

Screenshots added in post #2. Note that only this rom and SlimLP work with the latest Xpivacy module. Tried on Crdroid and others and there is bootloop as soon as you enable Xprivacy.

Has no one tried this rom as not reports or posts
tried flashing update from scratch and get play services fc on every gapps i used............i am guessing i may have to flash initial release and dirty flash this over it? excuse me if i may have got it wrong

shingers5 said:
Has no one tried this rom as not reports or posts
Click to expand...
Click to collapse
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...

optimumpro said:
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
Click to expand...
Click to collapse
I'm having issues flashing the new version as getting play services errors.... Was gonna try dirty flash over previous versions

[ROM] JAGUAR PIE OFFICIAL NON-TREBLE V6, updated August 7

Here is Jaguar Pie. In addition to familiar Pie features (all of them), you have:
Official Telegram Link: https://t.me/jaguar_Rom_Official
The main thing: Non-treble! So, your vendor is located in system partition, which is NOT available to the entire world, like in treble roms.
1. Hardened/fortified bionic (over 150 commits) to prevent bad behavior by system and third party apps
2. Most runtime processes are read only, which means they can't be exploited to take over the device. I am trying to attack the cause, rather than the symptoms (a specific exploit)
3. Many kernel security features activated, such as 'configuration_integrity', randomization; hardened user copy, etc. Impulse governor added
4. Yama security in kernel
5. Working msm hotplug, which actually plugs/unplugs CPU based on load
6. Wakelock blocker, Alarm blocker etc
7. Gestures, Omni Theming
8. Smart pixels
9. Offline charging
10. Utouch
11. AOD
12. No response to 'type zero' SMS
13. Boot time on a fully settled rom is about 4-5 seconds after Zuk logo
14. Qualcomm's boost framework
Many more features, which I am tired to list.
This is beta, because I don't have the device - relied on @Dr.07 @The.Night.King and @benedict97 - thanks for testing
INSTRUCTIONS:
1. Format System/Vendor (if you have it)/Data/Dalvik/Cache. If you are encrypted in Oreo or encrypted with FBE, you also need a format with factory reset to get rid of encryption. ALSO: FORMAT FACTORY partition, otherwise, you will have 2 sets of vendor blobs, which would create a mess on boot
2. Flash the rom, flash Gapps, reboot and let the rom run, then
3. Back to TWRP to flash Magisk (18.1 is working)
Rom download V1: https://forum.xda-developers.com/devdb/project/dl/?id=31427
This is the initial release. All future updates will be in post #3, as usual.
Credit: MrHacker (I used his device tree as a base) and many others who work on device tree and kernel and obviously AOSP, OMNI, DU, CopperheadOS, Carbon Rom, Xtended and Benzo
Also, credit for a Jaguar bootanimation to @Ashish9 and @The.Night.King who made a logo and header icon
If anyone is interested in Afwall with administrative option restored (app can't be uninstalled, unless confirmed by you): https://forum.xda-developers.com/attachment.php?attachmentid=4739733&d=1554836212
XDA:DevDB Information
[ROM] JAGUAR PIE NON-TREBLE 3.18 KERNEL OFFICIAL, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
optimumpro
Source Code: https://github.com/optimumpr/kernel_zuk_msm8996
Sources for new (May 29) kernel: https://github.com/optimumpr/android_kernel_zuk_msm8996-1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
Based On: AOSP, DU, Lineage
Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2019-04-05
Created 2019-04-05
Last Updated 2019-08-07

Screenshots
Some screenshots:

Updates in this post
Those who are coming from treble roms: you need to format Factory partition too, otherwise, you will have 2 sets of vendor blobs, in other words, MESS
August 7. New release.
1. August security patches
2. Google r46
3. Camera should have level 3 now + more
Dirty flashing is fine, if on the previous release. Otherwise, clean flash - wipe Vendor/Factory/System/Data/Cache/Dalvik
Download rom V6: https://forum.xda-developers.com/devdb/project/dl/?id=31753
July 30: New release V5.2 with fixed installation problems:
You could try dirty flash, but I installed clean, then flashed Opengapps, and Firefox installed without any problems, while it didn't on V5.1.
Download rom V5.2: https://forum.xda-developers.com/devdb/project/dl/?id=31733
July 27. New release, v5.1.
This will fix encryption.
The reason it didn't work was the official TWRP. The maintainer (a known pro) put in the wrong size of userdata partition. So, if you ever formatted data on official TWRP, especially with factory reset, your data partition is screwed for the purposes of encryption (no place for crypto footer). I had to install another version of TWRP, and after I did format there, encryption worked. So, I am attaching both the rom and unofficial TWRP by handibuddy. This is also a signed version (as well as the rom itself), so you can re-lock bootloader on this rom: I have been doing this for ages and long before Lineage came up with the idea (you can check my signing guide in Oneplus 5 thread).
Download Rom V5.1: https://forum.xda-developers.com/devdb/project/dl/?id=31727
Download signed TWRP: https://forum.xda-developers.com/devdb/project/dl/?id=31728
Instructions: Rom could be flashed dirty over V5. TWRP could be flashed as image (to recovery) in your existing TWRP or via fastboot.
Just remember, if you want to relock bootloader, encrypt after locking.
July 25. New release, v5
1. July security patches
2. New Night Screen with configurable tint and brightness
3. Support for level 6-6.2 for AVC codecs
4. Option to disable proximity sensor during calls
5. In-CallUi is now themeable
6. Aggressive battery saving mode
7. Latest Lawnchair
Clean flash is required over V4 or if coming from a different rom, in which case you will also need to format vendor or factory partition.
DO NOT ENCRYPT YET!
Instructions:
1. Dirty flash, if already on Jaguar Pie
2. Clean flash, If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Download rom V5: https://forum.xda-developers.com/devdb/project/dl/?id=31725
________________________________________________________________________________________________________
June 6. New release, V4:
1. June security patches
2. Pie r41
Dirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
ps, reboot, then back to TWRP to flash Magisk
Download rom V4: https://forum.xda-developers.com/devdb/project/dl/?id=31621
______________________________________________________________________________________________________________________
June 2. Lawnchair update to the latest. Flash in TWRP.
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4770317&d=1559500522
May 31. Rom updated, V3:
1. Major kernel improvements - there is no reason to use my Oreo kernel or any other kernel
2. Flashlight works regardless of 'always on' or 'ambient display' (that required a clean flash)
Instructions:
1. Clean flash recommended - wipe system/data/cache/dalvik
2. If coming from a different rom, also format vendor/factory
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
Download rom V3: https://forum.xda-developers.com/devdb/project/dl/?id=31612
_____________________________________________________________________________________________________________________
May 30. This is an updated version of the new kernel I posted earlier. This one contains my commits + reversed 'power saving' commits. Sometimes, you get things better by reversing.
Unzip, put on internal SD and flash either with TWRP (as image onto boot partition) or via fastboot.
Download new kernel: https://forum.xda-developers.com/attachment.php?attachmentid=4768179&d=1559177914
May 28. Lawnchair update. Flash in recovery:
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4767269&d=1559060237
May 27. Updated release:
1. Fixed toggling flashlight in ambient display
2. Improvements in Qualcomm's boostframework
3. Contactsprovider updated (disappearing contacts)
Could be dirty flashed over V2. Otherwise, clean flash.
Download rom V2.1: https://forum.xda-developers.com/devdb/project/dl/?id=31602
May 25. New release, V2:
1. May security patches
2. Android Pie r37
3. Big changes in frameworks: exec spawning function is severely restricted to all apps, i.e., only one instance is allowed
4. Most resources preloading for exec spawning is disabled. As a result, boot time is shorter, fewer background resources are loaded in ram, which translates into an overall smoother experience.
5. Aggressive battery saving
6. Status bar burn protection
7. Media cover art filter (on lockscreen)
8. Switched to Bromite system webview V74
9. Redone auto-brightness and ambient display: ZukDoze removed, as Customdoze and Amibientdisplay are now builtin (Settings/Display)
10. Lawnchair upgraded: many fixes including Pie recents
11. MusicFX/Equalizer is now themeable
12. Zukparts removed, as spectrum profiles simply don't work, and KCAL could be done via Kernel Adiutor
13. Battery icon Q style
14. Wifi randomization working (Developer Settings)
15. Captive portal detection toggle (Settings/Wifi/Advanced - disable network connectivity check). You can now uninstall Captiveportal and have no 'x' in Wifi and Mobile icons
Instructions:
1. Clean flash required
2. Format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps or Nano Gaps, reboot. Then back to TWRP and flash Magisk
If your provider's APN is not on the list, set it up and enable. If data doesn't work, then change CDMA subscription in Mobile network to the alternative.
Download rom V2: https://forum.xda-developers.com/devdb/project/dl/?id=31591
__________________________________________________________________________________________________________________
April 9. New release. Lots of changes, mostly in kernel:
1. Inteli-thermal
2. Thermal-engine ported from Jaguar Oreo, so the rom runs about 3 degrees cooler
3. Substantially improved fluidity: according to testers, virtually no lag
Instructions:
1 If on a previous release, flash dirty and wipe dalvik/cache
2. if new, format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps, reboot. Then back to TWRP and flash Magisk
Download rom V1.1: https://forum.xda-developers.com/devdb/project/dl/?id=31467
_____________________________________________________________________________________________________________________
April 5. Here is the first update, kernel only. Speed improvement.
Just flash boot.img on top of the first release.
Download kernel: https://androidfilehost.com/?fid=1395089523397933955

Finally ?

@optimumpro Thank you. Respect?

Thanks for the work! ?

Woh!!!!...... Waiting for a detailed review by someone.....

Wow finally

vinay069 said:
Woh!!!!...... Waiting for a detailed review by someone.....
Click to expand...
Click to collapse
your prediction turned out pretty accurate about the release date lol

All right, boys and girls. First update: kernel only - speed improvement . Download (in post #3) and flash on top of the first release

Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?

GopalKaul said:
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
Click to expand...
Click to collapse
Screenshots posted. Stereo sound - not yet.

optimumpro said:
Screenshots posted. Stereo sound - not yet.
Click to expand...
Click to collapse
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?

The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?

Shubhi singhal said:
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Click to expand...
Click to collapse
Just flash rom

The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Kernel only.

venom0207 said:
Just flash rom
Click to expand...
Click to collapse
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?

Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
@optimumpro animations r fekked

Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
It is non treble, factory or vendor have nothing to do with it, you can straight away flash the rom

Flashed the ROM.
It took a lot of time to boot.
Swipe up home screen is not showing any options
Recents is not pie recents
Very fast ROM
In some themes, the notifications are invisible

[ROM][10.0 r49] Jaguar Q Oneplus 5 Official V16 Updated December 8

This is Jaguar Q, a continuation of Jaguar Pie. The project aims at hardening of Android and Linux kernel + performance. :
1. Hardened bionic (which is responsible for C+/C++ portions of Android)
2. Hardened kernel (many features ported from 4.14 kernel)
3. Selinux replaced with Yama security
4. Various features, such as Alarm blocking and Wakelock blocker
5. Rom can boot on locked bootloader, but if you require root and Magisk, you must unlock
6. Various options from the top down starting from Status bar to Navigation bar.
7. Gestures, etc.
8. Kernel is the same as in Jaguar Pie with many security commits from Linux Hardened project
9. MicroG support
10. Adaway entries incorporated into Android native hosts file.
11. Calendar and Calculator with their own extensive theming options added, credit to Tibor Kaputa of Simple Mobile Tools
12. Toggle in Wireless options to get rid of Captive Portal (no more little 'x' if Captive Portal is removed)
and more...
Regular features include various customizations in statusbar, lockscreen, gestures, aggressive battery, smart battery, battery bar, ambient display, hardware buttons, smart pixels, power menu, notifications. Almost every custom feature from Pie has been ported
Requirements: Unlocked bootloader, if you require Magisk/Root, minimum 9.0.9 firmware and TWRP capable of mounting/writing Vendor partition
Instructions: Detailed instructions are in post #3 together with download links
New Kernel Source effective March 5, 2020: https://github.com/optimumpr/kernel_oneplus5_msm8998
Kernel Source: https://github.com/optimumpr/android_kernel_oneplus_msm8998-1
Credits: AOSP, DU, OMNI, BENZO, LINEAGE, CARBON, XTENDED, Paranoid Android and everybody who contributed to Kernel (all listed in the link)
XDA:DevDB Information
JAGUAR Q, ROM for the OnePlus 5
Contributors
optimumpro
Source Code:
https://github.com/optimumpr/android_kernel_oneplus_msm8998-1
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.0.9 Firmware minimum; Unlocked Bootloader, if Magisk is Required
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-01-15
Created 2020-01-15
Last Updated 2020-11-04

Some screenshots:

Preamble:
1. Android Q no longer has FDE, just FBE. So, Jaguar is force-encrypt, which means the phone will be encrypted on first boot. Don't use 'no force-encrypt addons', as you will have problems with hardware (WIFI/GPS/Bluetooth etc), as much of the init related code in Q have been re-written to adapt to 'force-encrypt' FBE. There is no reason whatsoever not to encrypt your phone. The only temporary con is that every time before upgrading, you would have to remove your pin code, that is until the Q version of TWRP is available
2. Locked bootloader: The rom will boot and function on locked bootloader with no warning whatsoever (like on stock). However, since Android Q no longer has AVB v1 boot signing (It has been replaced with AVB v2), on device signing is no longer available. That means any kernel modification (such as what Magisk does) will result in a red warning screen and no boot. So, if you want Magisk and Root, unlock your bootloader
Instructions:
1. If you are coming from any Pie rom, including stock, full wipe is required including internal SD card. That means selecting 'Wipe' and 'Format Data' in TWRP, where you'd need to enter 'Yes' to confirm formatting. Such formatting will erase everything on your internal SD card including all previous TWRP backups. So, transfer whatever you need to a PC. After formatting, reboot in TWRP again.
2. Make sure to have at least 9.0.9 firmware. Otherwise, flashing will abort
3. TWRP: wipe System/Data/Vendor/Cache
4. Flash the rom and boot once. After that do whatever you want: Gapps/Magisk, etc. .
DOWNLOADS
December 8, 2020. New release, V16
1. Android r49
2. December security patches
3. Lockscreen clock styles
4. One hand UI
Flashing on top of the previous release is fine. Otherwise, read instructions:
Download rom V16: Rom V16
November 5, 2020. New release, V15.1
This fixes SMS sending in V15
1. Android r48
2. November security patches
3. Seedvault backup added
4. Long pin/password compatible with quick unlock
5. Omniweather is back with extra provider
Dirty flashing is fine on top of the previous release
Download rom V15.1: https://androidfilehost.com/?fid=10763459528675578121
October 9, 2020. New release, V14
1. Android r47
2. October security patches
3. Volume Panel location left/right
4. Amoled theme added in keyboard
Dirty flashing is fine.
Download Rom V14: https://androidfilehost.com/?fid=10763459528675559111
September 23, 2020. New release, V13
1. Application Locker implemented - you can lock any app with a fingerprint (Settings/Security/Application locker)
2. Most userdebug overhead removed, including console, so, rom is more fluid now
3. Fix for Jaguar features icons not shown in light theme
Dirty flashing is fine on top of previous release, otherwise, read instructions above.
Download rom V13: https://androidfilehost.com/?fid=8889791610682943691
September 18, 2020. New release, V12.1
1. Device host name could be customized
2. Wired accessories additions
3. Jaguar rom options drawables made light/dark, as in the rest of Settings
4. Glonass gps enabled
5. Device name changed to pass Safetynet without Magisk
Dirty flashing is fine on top of the previous release
Download rom V12.1: https://androidfilehost.com/?fid=8889791610682940780
September 9, 2020. New release, V12
1. Google r46
2. September security patches
3. Updated kernel
4. Preventing apps from getting IMSI and Build numbers
5. Disabled Google analytics when Gapps are installed
6. Safetynet should work without Magisk
7. Latest CAF changes
Dirty flashing is fine on top of the previous release
Download rom V12: https://androidfilehost.com/?fid=8889791610682933697
August 9. New release, V11
1. Google r41
2. August security patches
3. Screen stabilization (enabled via Quick tile)
4. Bluetooth playing/media transfer fixed
5. Rom version added in 'about phone'
6. Guest user: Disallow audio recording and disallow app install
Dirty flashing is fine on top of previous release.
Download rom V11: https://androidfilehost.com/?fid=8889791610682911588
July 29: New release, V10.4
1. Fixes some third party apps access to media files on internal SD card
2. Fixes some NFC glitches, such as 'can't open secure_element'
Dirty flash is fine on top of the previous release
Download rom V10.4: https://androidfilehost.com/?fid=8889791610682902982
July 24. New release, V10.3
Fixes call recording, as well as other improvements
Dirty flashing is fine on top of the previous release. Otherwise, see instructions
Download rom V10.3: https://androidfilehost.com/?fid=8889791610682899179
July18. New release
1. Bluetooth fix: Keep in mind that codec selection will only work when bluetooth is ON
2. Ringtone audio focus options
3. Sensor access moved to Settings/Privacy/Jaguar permissions
Dirty flashing on top of previous release is fine. Otherwise, read instructions
Download rom V10.2: https://androidfilehost.com/?fid=8889791610682894733
July 16. Rom updated:
1. Fix for Cut/Paste issue
2. Separate settings for Background Clipboard Access per app (Settings/Privacy/Jaguar permissions)
3. Overclocked Slimbus (kernel)
Dirty flash on top of the previous release is fine. Otherwise, read instructions
Download rom V10.1: https://androidfilehost.com/?fid=8889791610682893361
July 7. Rom updated:
1. Android r40
2. July security patches
3. Kernel to 4.4.228
4. Touch response optimization
5. Completely redone Bluetooth – new codecs including TWS (see options in Development)
6. UI cleanup, where some settings appeared more than once
7. Additional Volte icon
8. Fix battery optimization taking long time to load
9. Redone notification lights
10. Dock settings (Settings/Sound)
11. Hide apps from recents
12. My version of Afwall included, but disabled by default
Dirty flash is fine on top of previous release. Otherwise, read instructions
Download rom V10: https://forum.xda-developers.com/devdb/project/dl/?id=32405
June 14. Rome updated:
1. Toggle access to all networks per app (in addition to granulated access)
2. Toggle access to Camera on secure lockscreen (in addition to removing a short cut)
3. Configure each app access to sensors
4. UI redesign: all 'disable on secure lockscreen' features moved to Settings/Security
5. Real battery capacity (in Settings/Battery)
Dirty flashing is OK on top of the previous release. Otherwise, read instructions above.
Download rom V9.1: https://forum.xda-developers.com/devdb/project/dl/?id=32397
June 6. Rom updated to V9:
1. June security patches
2. Google release 39
3. Screen recording with sound
4. Keyboard back to AOSP+ with an extra row for numbers
5. Most blobs from Oxygen 10 stable
Dirty flash on top of the previous release is fine. Otherwise read instructions.
Download rom v9: https://forum.xda-developers.com/devdb/project/dl/?id=32391
May 23. Rom updated. V-8.1
1. Rom rebuilt with dexpreopt for speed (100mb larger as a result)
2. Pocket judge driver implemented in kernel
3. Unprivileged userland implemented (in kernel) and disabled
3. Kernel to 4.4.223
4. Keyboard now has gestures
5. Webview updated to V83.xxx
6. Platform, Hardware and Ram info in about phone
7. Some blobs from Oxygen Q beta 3
Dirty flashing on top of the previous release is fine. Otherwise read instructions.
Download rom, v-8.1: https://androidfilehost.com/?fid=4349826312261816992
May 6. Rom updated. V-8
1. May security patches
2. Android r36
3. Kernel updated to 4.4.221
4. Graphics firmware and blobs from Oxygen (not buggy Hydrogen) Q beta
5. Qperformance blob from Oxygen Q to work with Qcom boostframework
6. Notification/alarm/ringtones added from Oxygen Q
Download rom V-8: https://androidfilehost.com/?fid=4349826312261799767
Dirty flashing on top of the previous release is fine. Otherwise, read instructions above.
April 21. Rom updated, V-7.2
1. Face unlock independent from Google apps/services
2. AOD QS tile.
3. Updated system apps.
4. Theme-able icons for Jaguar settings room (forgot to mention it in V7)
Dirty flash is fine on top of the previous release. Otherwise, read instructions.
Download rom V-7.2: https://androidfilehost.com/?fid=4349826312261778372
April 8. Rom updated, V-7
1. Android release 33
2. April security patches
Dirty flash on the previous release is fine
Download rom V7: https://androidfilehost.com/?fid=4349826312261765647
March 29. Rom updated, V-6
1. Theming changed, so now, you have dark and light interfaces with system wide accents of any color
2. Kernel updated to 4.4.217
3. Mobile data panel added (on long click in QS)
Dirty flash on top of the previous release is fine
Download rom V-6: https://androidfilehost.com/?fid=4349826312261757249
March 19. Rom updated, V-5.2
1. AOSP dark mode replaced with DU themes
2. More permissions added for Lawnchair
3. Wallpaper picker updated
Dirty flash on top of the previous release is fine.
Download V5.2: https://androidfilehost.com/?fid=4349826312261750138
March 16. Rom updated to V5.1
1. Option to adjust minimal brightness
2. AGPS switch
3. Switched to Lawnchair as home
4. Blobs updated to 9.0.11
Dirty flash on top of the previous release is fine. Otherwise - clean flash - read directions above
Download Rom V5.1: https://androidfilehost.com/?fid=4349826312261747017
March 5. Rom updated. V5
1. Rebased kernel
2. Offline charging
3. March security update and latest Android sources
4. Network traffic dynamic option
5. Night mode automatic (sunset/sunrise)
6. Sound picker backwards compatibility (no more f/c on older apps, when changing notification sounds)
Dirty flashing is fine, if on a previous release. Otherwise, clean flash, see instructions above
Download rom V5: https://androidfilehost.com/?fid=4349826312261738133
February 8. Rom updated, V4
1. February security patches and latest Android sources
2. Further simplification of UI
3. Get rid of certain features (font options) to lighten the rom
4. Notification vibration toggle
5. Google calendar crash fixed
Dirty flashing is fine. Otherwise, read instructions above.
Download rom V4: https://forum.xda-developers.com/devdb/project/dl/?id=32329
___________________________________________________________________________________________________________________
January 30. Rom updated, V3
1. Latest Android source
2. Revised UI (lockscreen features are now in 'Display/Lockscreen')
3. Fingerprint additional settings (vibration) are now in 'Security' next to Fingerprint
4. Notification options are now in 'Apps and Notifications'
5. Restored original 'hosts' file to prevent issues with Googleplay download
6. Call recording enabled for all
7. Priv-app permissions for several Google apps are introduced and enforced
8. Gboard is replaced with open source OpenBoard
9. Flashlight blinking on calls removed, as it couldn't be turned off
Credit for OpenBoard to dslul: https://github.com/dslul/openboard
Dirty flashing over the previous release is fine
Download rom V3: https://forum.xda-developers.com/devdb/project/dl/?id=32313
____________________________________________________________________________________________________________
January 20. Rom updated, V2
1. Redesigned UI. Theming and doze settings moved to Display; Extra battery settings to Battery
2. Lockscreen fonts options
3. New hosts file, which allows connection to googleplay
4. New icon for Private Dns
5. Print services icon now themeable.
Dirty flash is fine.
Download rom V2: https://forum.xda-developers.com/devdb/project/dl/?id=32287
__________________________________________________________________________________________________________________
Download rom V1: https://forum.xda-developers.com/devdb/project/dl/?id=32261

Thanks! Time to upgrade to android 10

Is there any feature list available?

Added to the OnePlus 5 Index Thread here.

Fyi GitHub link is dead

Binary Assault said:
Fyi GitHub link is dead
Click to expand...
Click to collapse
Fixed.

Play Store works neither with microG nor with gapps. Seems to be a problem with Jaguar, as a full clean install had the same problem. I just normally installed 9.0.10 firmware with Jaguar, Magisk and Gapps, but Play Store stuck at pending the download.

Pokemetti2 said:
Play Store works neither with microG nor with gapps. Seems to be a problem with Jaguar, as a full clean install had the same problem. I just normally installed 9.0.10 firmware with Jaguar, Magisk and Gapps, but Play Store stuck at pending the download.
Click to expand...
Click to collapse
1. See if anyone else has this problem.
2. Did you boot once before installing Gapps and Magisk?
3. Check if you didn't restrict wifi/mobile for 'Downloads' and 'Download manager'
4. If none of the above works, then open /system/system/etc/hosts, delete everything after '::1 localhost' (leave one empty line in the end), save and reboot. It is possible that the Adaway hosts file has some entries preventing connection

Had same issue but while deleting some hosts from the host file it started downloading from the play store

undopt said:
Had same issue but while deleting some hosts from the host file it started downloading from the play store
Click to expand...
Click to collapse
Which one did you delete? Or if you don't remember, just post your hosts file.

pixel theme bug
didn't work for cange accent color default
log :
https://del.dog/dapyrfarfi

Hi thanks for the update but the link seems to be dead

optimumpro said:
Which one did you delete? Or if you don't remember, just post your hosts file.
Click to expand...
Click to collapse
I just deleted some of the first few lines. Here is the file.
https://gofile.io/?c=KWSRpl

optimumpro said:
1. See if anyone else has this problem.
2. Did you boot once before installing Gapps and Magisk?
3. Check if you didn't restrict wifi/mobile for 'Downloads' and 'Download manager'
4. If none of the above works, then open /system/system/etc/hosts, delete everything after '::1 localhost' (leave one empty line in the end), save and reboot. It is possible that the Adaway hosts file has some entries preventing connection
Click to expand...
Click to collapse
Thanks for the response. I didn't boot before installing Gapps, I first tried doing microG and then FlameGapps. I installed crDroid but I'm gonna try your tips out now.

undopt said:
I just deleted some of the first few lines. Here is the file.
https://gofile.io/?c=KWSRpl
Click to expand...
Click to collapse
I think you have cut too much. Those were a few google entries like google syndication etc..
For now, everyone could use your file and manually transfer it (in TWRP) to /system/system/etc

mazino1003 said:
Hi thanks for the update but the link seems to be dead
Click to expand...
Click to collapse
The link is fine. You can also go into Download section on top and get it from there.

A kind of "feature request" to optimumpro: Please make the CPU Input boost configurable from FKM! Appreciated from my side, but your choice.

Pokemetti2 said:
A kind of "feature request" to optimumpro: Please make the CPU Input boost configurable from FKM! Appreciated from my side, but your choice.
Click to expand...
Click to collapse
Use Kernel Adiutor.

[ROM] [10.0] [STABLE] [walleye] Dirty Unicorns 14.6 [UNOFFICIAL]

ROM VERSION: 14.6
Device: Google Pixel 2
Build Type: UNOFFICIAL
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CLEAN FLASH :
Download the latest build (Pixel Gapps included)
Reboot to recovery
Wipe System, Data, Dalvik
Flash the latest build
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
Latest build
Kernel Source:: https://github.com/gibranmather/android_kernel_google_wahoo
Device Tree:: https://github.com/gibranmather/abc_device_google_walleye
XDA:DevDB Information
Dirty Unicorns , ROM for the Google Pixel 2
Contributors
gibranm
Source Code: https://github.com/gibranmather/android_kernel_google_wahoo
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: May Firmware
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 14.4
Stable Release Date: 2020-06-08
Created 2020-05-29
Last Updated 2020-06-08

Stock kernel provides a balanced experience in terms of battery and smoothness.
For users who want a lightweight efficient kernel with great battery gains, I would strongly recommend Sultans kernel.
For user who want a bit more customisations from their kernel, I would suggest Flar2's elemental x.

Reserved
This rom provides a lossless pixel experience with extra features and customisations.
All pixel features working: Active Edge, Now Playing, Google Assistant
All sensors are working
Safetynet passes by default
Widevine L1 DRM present for hd video
Kernel is unicornblood for taimen with commits to enable touch on walleye.
TWRP will not be able to decrypt if you have a pin. So only disable pin when you need to use twrp

Thank you for keeping walleye alive!! So far everything is working good.

Pretty stable ROM!! Thanks a lot!

14.4 update is compiling right now. Will release soon

14.4 Out
14.4 Changelog:
June ASB merged
Kernel upstreamed with asb merged
Redesigned front end of tweaks app

gibranm said:
14.4 Changelog:
June ASB merged
Kernel upstreamed with asb merged
Redesigned front end of tweaks app
Click to expand...
Click to collapse
@gibranm THREAD CLOSED! Placeholder are not accepted.
Please advise the moderators' team (best via the report function) to re-open the thread when ready to provide a download link.

New Build 11/08/20
Dirty Unicorns have returned to XDA, hence the thread reopening. Here is du 14.6 for walleye.
Changelog:
- Merged in August's security update
- Add option to hide clock on home screen
- Add in the Caviar Dreams font
- Added various AOSP fixes to improve the overall experience
- Device specific fixes where applicable
- Imported French translations
Latest build

gibranm said:
Dirty Unicorns have returned to XDA, hence the thread reopening. Here is du 14.6 for walleye.
Changelog:
- Merged in August's security update
- Add option to hide clock on home screen
- Add in the Caviar Dreams font
- Added various AOSP fixes to improve the overall experience
- Device specific fixes where applicable
- Imported French translations
Latest build
Click to expand...
Click to collapse
CLEAN FLASH :
Download the latest build (Pixel Gapps included)
Reboot to recovery
Wipe System, Data, Dalvik
Flash the latest build
Reboot
Sorry for the maybe dumb question. Do i have to flash it to both slots A and B? Not mentioned above. Is there a how to?
It's my first Pixel 2 after many years of Nexus Phones. THX
PS: I'm @ abc Rom (Bill Blandford) atm

MontiBurn said:
CLEAN FLASH :
Download the latest build (Pixel Gapps included)
Reboot to recovery
Wipe System, Data, Dalvik
Flash the latest build
Reboot
Sorry for the maybe dumb question. Do i have to flash it to both slots A and B? Not mentioned above. Is there a how to?
It's my first Pixel 2 after many years of Nexus Phones. THX
PS: I'm @ abc Rom (Bill Blandford) atm
Click to expand...
Click to collapse
No need. If you have twrp, reboot to recovery and follow instructions. Don't forget to flash twrp zip after ROM zip

gibranm said:
No need. If you have twrp, reboot to recovery and follow instructions. Don't forget to flash twrp zip after ROM zip
Click to expand...
Click to collapse
Thanks! Stock Rom needed before or just over my current Rom?

No. As long as you are on June firmware and have twrp. Follow the instructions and flash twrp zip

gibranm said:
No. As long as you are on June firmware and have twrp. Follow the instructions and flash twrp zip
Click to expand...
Click to collapse
Hey there, is the June firmware required or will July/August work as well?

Shamestick said:
Hey there, is the June firmware required or will July/August work as well?
Click to expand...
Click to collapse
June or newer will be fjne

gibranm said:
June or newer will be fjne
Click to expand...
Click to collapse
Awesome I appreciate your quick reply, my friend. I also hopped over to the official Taimen thread and your comment was confirmed.
Have had my Pixel 2 for over 2.5 years now and never flashed a custom rom (previous flashaholic on all previous devices ) but I think I may just take this for a spin over the weekend and see how it goes. Always loved DU.

Does anyone use / willing to try installing LMT pie?
This is the first time I've had any problems, but it's granted all the accesses it needs and comes out but the commands won't work. Curious if others have the same.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 08:46 AM ---------- Previous post was at 08:42 AM ----------
The build is running great otherwise!
Sent from my [device_name] using XDA-Developers Legacy app

Can't use screen mirror or screen cast to Roku tv seems like a kernel crash but can't catch a log as I have another issue I can't tell if ROM related or hardware related so till then screen cast is only issue I have

Tried to download Latest Build. Have to Login with G-Account and send the request. Getting immediately
Delivery Status Notification (Failure)
, can't be send how do i get this rom? @du Homepage only Pixel2 XL is available. Will there be updates?

Development [ROM][11.0_r68]JAGUAR ONEPLUS 9 Pro OFFICIAL V33 Updated June 7, 2023

TELEGRAM CHANNEL ADDED: HERE
TELEGRAM CHAT GROUP: HERE
Jaguar is available on locked bootloader with working root (Magisk)
SAFETY NET PASSING FIXED AS OF Version 19 (confirmed)
Instructions Here
You can actually use alarm when the phone is shut down. It would boot 2 minutes prior to scheduled time and trigger the alarm on time
This is official build of Jaguar Rom.
I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk, Oneplus 3, Oneplus 5 and Oneplus 6 and Oneplus 8 series. You can check my Oneplus 8 or Oneplus 8T or Oneplus 6 or Oneplus 6T or Oneplus 8 Pro threads.
Jaguar rom is focused on hardening of AndroidOS and kernel. As such, the rom has hardened bionic, art, framework and tightened security.
1 Rom control with custom Power options, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc...
2. Heavily modified Art, Bionic System/Vold and System/Security
3. Telephony response to Type Zero sms ('silently acknowledged') disabled
4. Toggle to disable Captive Portal logging.
5. Speakerphone proximity sensor toggle - could be set to automatically switch to speaker when not at the ear
6. IMEI and phone numbers hidden in About menu
7. Built-in encrypted DNS providers, such as: Cloudflare (US); LibreDns (Germany); AdguardDns (Cyprus); and PowerDns (Netherlands)
8. Wakelock and Alarmblocker
9. Fully working Call recording with the button visible in Dialer
10. Deskclock app modified to work with PowerOn alarm. The app will boot the phone 2 minutes before scheduled time to trigger the alarm on time
11. Default Dark mode
12. All regular customizations plus. You tell me which feature is missing.
13. Prebuilt Magisk 23 (coming soon to 9 Pro). You wouldn't have to flash it, just need to install Magisk manager.
Install instructions (first time use)
OOS 11 in both slots. This is not a Jaguar requirement, but rather a universal one for any custom rom, including Android 12.
Keep in mind, MSM takes care of one slot only. You need to manually install OOS-11 into another slot. Either boot into system (after MSM) and install OOS-11 by using a local option or boot into TWRP and install OOS-11 again. If there is no suitable OOS-11 for your device (branded etc), use Lineage's partition copy method. Link here
1. Fastboot flash recovery images:
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
2. Reboot in recovery (TWRP), now Lineage type, sideload and flash the rom, factory reset and reboot.
If you want Gapps on Vanilla (not necessary on Full version), they should be flashed before the first boot into system, i.e., after flashing the rom, reboot in Recovery (mandatory) and flash Gapps.
When downloading from XDA or Android File host, put your browser in incognito.
All Releases ARE in post #3
XDAevDB Information
JAGUAR R, ROM for the OnePlus 9 Pro
Contributors
optimumpro
Special thanks to @Warrkill for testing
Kernel Source Code: HERE
ROM OS Version: 11.x R
ROM Kernel: Linux 5.x
ROM Firmware Required: OOS11 in both slots
Based On: AOSP/Lineage/DirtyUnicorn/Crdroid
Version Information
Status: Stable
Stable Release Date: 2021-01-26
Created: 2022-01-26
Updated: 2023-06-07
Credit: AOSP, Lineage, DU, Crdroid, CalyxOS

The rom could be used on locked bootloader with ROOT (donate feature) with or without Gapps.
The benefits of LOCKED BOOTLOADER combined with WORKING AVB-2 protection are:
Get your DRM L1 certificate back. Most banking apps (if not all) will work with or without Magisk: you cimply get a warning 'your devices is rooted', but you can proceed to login
Security: Nobody and nothing can modify Kernel, Recovery and Virtual Partitions without triggering a red screen of death with the message 'your device is corrupted and cannot boot'.
At that point, the only option is to unlock bootloader. But, if a user had previously disabled OEM unlock in Developer settings, then unlocking becomes unavailable, and so does flashing via fastboot. In other words, if your phone gets into the hands of an adversary, their only option is to use MSM tool to make the phone work again, but no access to your data or any other partition.
The rom can also allow you to flash Magisk on locked bootloader. If interested, send me a PM.
Some screenshots of the rom (from Oneplus 8 thread): HERE

WHEN DOWNLOADING FROM XDA, PUT YOUR BROWSER IN INCOGNITO
For Indian Users Only: If you don't have 5G, that means that you have an older handset and Indian carriers didn't provide their modem configuration to Oneplus in time. In this case, use QPST method which has been confirmed working
June 7. New Release V-33
1. June security patches
2. Android r68
3. Updated webview
4. New 'about Jaguar' section
5. New system-wide accents added: total over 70
6. Forced disable AGPS toggle now disables PSDS servers too
7. Access to Radio preference in 'about phone'
8. Option for figerprint icons to take system-wide accents
9. DocumentsUI/Files now can set homescreen shortcuts for most files
Dirty flashing on a previous release is fine
Download rom V33 VANILLA: Here
Download rom V33 FULL: Here
May 7, New Release V-32
1. May security patches
2. Android r67
3. Amoled black switch (for dark mode)
4. Sometimes missing SMS fixed
5. Bionic and Art updated to latest upstream (Android 13)
6. Gray accents darkened
7. Updated webview
8. InCall UI now takes selected system-wide accents
9. Battery Bar centered.
Flashing on top of a previous release is fine
Download rom V32 VANILLA: superseeded
Download rom V32 FULL: superseeded
April 12. New Release V-31
1. April security patches.
2. Android r66
3. Toggle to disable AGPS
4. Toggle to disable Direct Share
5. Number of users increased to 32
6. Webview to 112.x
7. Missing OneplusDoze app included
8. No phone ID sent to servers when AGPS used
9. Shelter integrated as Work Profile Manager
10. No more statusbar icons cut off when burnin is shifting
11. No more ghost fingerprint icon
Dirty flashing on top of a previous release is fine
Download rom V31 VANILLA: Here
Download rom V31 FULL: Here
Recovery (UNZIP to INSTALL): Here
March 22. New Release V-30.1
1. Fixes a bug (not attaching photos in messengers) introduced in V30
2. Fixes a long press on Data QS toggle.
Dirty flashing is fine on a previous release
Download rom V30.1 VANILLA: Here
Download rom V30.1-FULL: Here
March 16. New release, V-30
FOD Issue has been Fixed
1. FOD non-wakeup issue has finally been fixed
2. March security patches
3. Android r65
4. Internal Firewall icon shown in status bar when an app access is denied
5. GPS does not turn automatically during emergency call unless enabled by user
6. Updated Webview
7. Some new ringtones/alarm/notification sounds added
8. Bug fixing
Dirty flashing on a previous release is fine
Download rom V30 Vanilla: Removed see above
Download rom V30 Full: Removed see above
February 7. New Release V-29
1. February Security patches
2. Android r64
3. Ability to display true app icons in Statusbar/Lockscreen Notification
4. Sound pulse: new placing options
5. Updated Opencamera
6. Webview to 109
7. Adaptive network connectivity (battery saving feature)
8. Fixed network traffic arrows
9. Fixed charging sounds - Connect/Disconnect
Download rom V29 VANILLA: Here
Download rom V29 FULL: Here
January 5. New release V-28
1. January security patches
2. Android r63
3. Updated kernel
4. Bionic ported from Android 13
5. Smart pixels removed (poorly implemented and unfixable)
6. Trustcor certificates removed
Dirty flashing on a previous release is fine
Due to some changes in kernel, and the fact I don't have any of the 9 series, there is a slight chance this version may not boot. If so, please run a logcat.
Download rom V28-FULL: Here
Download rom V28-VANILLA: Here
December 8. New release V-27
1. December security patches
2. Android r62
3. Full internal Firewall (In Settings/Network & Internet)
4. Multi-resolution for Gcam
5. Background notification opacity
6. Webview to 108
7. Reworked Connectivity settings: make sure it is OFF in Settings/Network & Internet, then toggle airplane mode OFF/On
Dirty flashing on a previous release is fine
Download rom V27 VANILLA: Here
Download rom V27 FULL: Here
November 10. New release V26:
1. November security patches
2. Android r61
3. Dialer, Contacts, Calendar and Calculator are aligned with system-wide accents
4. Screen flickering leftovers on FOD unlock are completely gone
5. Smart pixels no longer disable permissions
6. Toggle to turn on/off screenshot saving (Settings/Privacy)
7. Webview to .107
Download rom V26 VANILLA: Here
Download rom V26 FULL: Here
October 7. New release V-25
1. October security patches
2. Android r60
3. Fingerprint brightness flickering - addressed
4. Webview 106.x
5. Some selinux denials (system_suspend) - addressed
Dirty flashing is fine on a previous release
Download rom V25 VANILLA: Here
Download rom V25: FULL: Here
September 8. New release V-24: major update
1. September security patches
2. Android r59
3.Ability to change clock size in statusbar and quicksettings
4. Rom is now compatible with Magisk 25 and Lsposed
5. Fingerprint enrollment fixed
Dirty flashing is fine on previous releases
Download rom V-24 VANILLA: Here
Download rom V-24 FULL: Here
August 7. New release V-23
1. August security patches
2. Android r58
3. 5G network options in OneplusSettings
Dirty flashing is fine on a previous release
Download rom V-23 VANILLA: Here
Download rom V-23 FULL: Here
July 8. New release V-22
1. July security patches
2. Android r57
3. Clear clipboard quick setting toggle
4. Metro audio player
5. Many under the hood improvements
Download rom V-22 FULL: Here
Download rom V-22 VANILLA: Here
June 7. New release V-21:
1. June security patches
2. Android r56
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
Dirty flashing is fine on a previous release
Download rom V21-VANILLA: Here
Download rom V21-FULL: Here
Download recovery: Here
May 29. New release V-20.2
1. Captive portal now On/Off
2. Addressed some apps crashing with message "missing Internet permission'
3. HBM fixed, now fully working (Auto HBM is recommended with trigger set to 40000 lux in Oneplus Settings)
4. One shot auto-brightness
5. In-call volume increased for Speaker and Headset
Dirty flashing is fine on a previous release
Download rom V20.2 VANILLA: Here
Download rom V20.2 FULL: Here
Recovery: Here
May 12. New release V-20.1
1. Redone adaptive brightness
2. Call recording (bug introduced in V-20) fixed
3. Captive portal: added 3 options Standard (Google), Alternative and Disabled) and moved to Settings/Network
4. Fingerprint icons and colors made more transparent, so, now fingerpint works flawlessly.
Dirty flashing is fine on a previous release
Bootlooping issue has been fixed. You can use this user-debug full version or wait for June release.
May 7. New release, V-20
1. May security patches
2. Google r55
3. Recovery fixed to have 'yes/no' prompt on signatures mismatch (for Magisk). Recovery will install automatically, just reboot to flash Magisk etc.
April 29. New release V-19.1
1. Wakelock blockers in kernel
2. Jaguar version is now displayed in About phone
3. Choice for temperature units F/C for lockscreen battery info
4. A bunch of other under the hood improvements
5. Fixes array mismatch in fingerprint
Dirty flashing is fine
Download rom V19.1 VANILLA: Here
Download rom V19.1 FULL: Here
April 16. New release V-19.1:
1. AOD is fully working (see screenshot Here)
2. Experimental feature: toggle to spoof Pixel to get unlimited storage for Google Photos (in Settings/Accessibility)
Dirty flashing on a previous release is fine.
Download V-19.1-VANILLA: Here
Download V-19.1-FULL: Here
Recovery: Here
April 7: New release V-19. Safetynet is fixed, confirmed by an Oneplus 8 user here with detailed explanation here
1. April security patches
2. Google r54
3. Switched to AOSP webview 100.x
4. Working with Zgisk (confirmed)
5. Seedvault is back
Dirty flash is fine on a previous release
Download rom V19-VANILLA: Here
Download rom V19-FULL: Here
Download recovery: Here
March 12. New release, V-18
1. March security patches
2. Android r53
3. User build
4. Updated kernel
5. Options to choose between Bromite and Vanadium webivew
6. Optional torch flashing on incoming calls
7. Night display renamed into Display calibration
8. Full version of the rom added
Dirty flashing is fine on top of a previous release
Download rom V-18 Full version: Here
Recovery: here
Download rom V-18 Vanilla Vanilla version : Here
Recovery: Here
February 10, 2022. New Release - V-17
1. February security patches
2. Android r52
3. TWRP recovery replaced with a Lineage type
4. Toggle to hide statusbar clock (when launcher is active)
Dirty flashing is fine on top of a previous release
Download rom V-17: HERE
Boot: HERE
Vendor_boot: HERE

Reserved.

Reserved

Badass

I'm interested in flashing but want to know about the locked bootloader feature. I'd seen that it's been a possibility for some time but not sure I've understood what I've seen about it, and you say it is a donate feature. Does that mean we need to donate, then get a flashable file that would prevent bricking upon locking the bootloader, or is it simpler/more complex than that?

thats_the_guy said:
I'm interested in flashing but want to know about the locked bootloader feature. I'd seen that it's been a possibility for some time but not sure I've understood what I've seen about it, and you say it is a donate feature. Does that mean we need to donate, then get a flashable file that would prevent bricking upon locking the bootloader, or is it simpler/more complex than that?
Click to expand...
Click to collapse
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
About donation features: YES, IT'S ALLOWED! Sometimes. Shocker, I know. The moderation team may be tasked with – among many many many other things – shutting down projects that have only the goal of making money but this does not mean that donation features are forbidden. We expect that core features and most important functionality of any release remains free. We also understand that developing software is hard work which should be rewarded. Our goal is to find a balance and we do this together, as a community. To achieve this we often work with developers to find the best outcome for everyone.
Click to expand...
Click to collapse
So, if anyone is interested in relocking feature, please contact me via PM.

optimumpro said:
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
So, if anyone is interested in relocking feature, please contact me via PM.
Click to expand...
Click to collapse
Great to know, just finding the time to flash and restore is what's holding me back, but will try it out soon

Bro, I appreciate your work on rom. However, few bugs I should mention:
1. There is a bug that recent key button doesn't work. I tried everything. Even in gesture it doesn't work.
2. Speaker sound is bit low compare to OOS 11.
3. Wifi speed is just bit slower compare to OOS 11.
4. Some apps crashes like Tiktok, Skype and Banking app.
other than that, good rom. Nice job

break.cold said:
Bro, I appreciate your work on rom. However, few bugs I should mention:
1. There is a bug that recent key button doesn't work. I tried everything. Even in gesture it doesn't work.
2. Speaker sound is bit low compare to OOS 11.
3. Wifi speed is just bit slower compare to OOS 11.
4. Some apps crashes like Tiktok, Skype and Banking app.
other than that, good rom. Nice job
Click to expand...
Click to collapse
You probably installed another launcher. Starting from Android 10, only one launcher can have recents. You need a Magisk module that will switch to your specific launcher and then you'll have recents.
WIFI: My home internet connection speed is 300MB. My PC is hardwired and shows about 330/330MB, my Oneplus 8 shows around 310/290MB. See screenshot:

optimumpro said:
You probably installed another launcher. Starting from Android 10, only one launcher can have recents. You need a Magisk module that will switch to your specific launcher and then you'll have recents.
WIFI: My home internet connection speed is 300MB. My PC is hardwired and shows about 330/330MB, my Oneplus 8 shows around 310/290MB. See screenshot:
Click to expand...
Click to collapse
I used stock launcher meaning the one come with rom. Didn't install any other launcher.
I even tried to reinstall rom with Gapps from scratch but still problem exist.

optimumpro said:
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
So, if anyone is interested in relocking feature, please contact me via PM.
Click to expand...
Click to collapse
in future jaguar rom updates you release, it is posible to update with dirty flash in relocked bootloader?
Also, how much time you hoping to support this op9pro rom? You will release only Security patches?

bugac said:
in future jaguar rom updates you release, it is posible to update with dirty flash in relocked bootloader?
Also, how much time you hoping to support this op9pro rom? You will release only Security patches?
Click to expand...
Click to collapse
After relocking, updates are done the same way as with unlocked bootloader. You'd only need to unlock, if you switch to another rom.
9 Pro will be supported for longer than Oneplus 6s and 8s. Android 12 will replace 11 eventually, probably around r30.
break.cold said:
I used stock launcher meaning the one come with rom. Didn't install any other launcher.
I even tried to reinstall rom with Gapps from scratch but still problem exist.
Click to expand...
Click to collapse
Gapps are known to override stock launcher. Launcher3 included with Jaguar has no problem accessing recents.

optimumpro said:
Gapps are known to override stock launcher. Launcher3 included with Jaguar has no problem accessing recents.
Click to expand...
Click to collapse
So what do you recommend me to do?

break.cold said:
So what do you recommend me to do?
Click to expand...
Click to collapse
Install another Gapps package that doesn't override launcher. Or open a configuration file in your current gapps zip, There will be a list of apps to install. Find a launcher (Google or whatever it is) and either delete the line or put an '#' at the beginning of it.
Or find the same of the launcher in Settings/Apps and Notification and install a Magisk module that switches recents to the new launcher.

optimumpro said:
Install another Gapps package that doesn't override launcher. Or open a configuration file in your current gapps zip, There will be a list of apps to install. Find a launcher (Google or whatever it is) and either delete the line or put an '#' at the beginning of it.
Or find the same of the launcher in Settings/Apps and Notification and install a Magisk module that switches recents to the new launcher.
Click to expand...
Click to collapse
I use OpenGapps.

break.cold said:
I use OpenGapps.
Click to expand...
Click to collapse
Don't install the full package. Do Pico and then install additional apps you need as regular apps.
This is not a rom problem. As I have already said, Android frameworks allow only one app to be registered for Quickstep recents. To have another launcher, you must use Magisk module that does the switching.

break.cold said:
I use OpenGapps.
Click to expand...
Click to collapse
Here is the module. Get the name of your current launcher from Settings/Apps & Notifications, and use the module.

optimumpro said:
Here is the module. Get the name of your current launcher from Settings/Apps & Notifications, and use the module.
Click to expand...
Click to collapse
Ok. Thank you I will try.