Develop Bugs

HELP: Issues updating rooted device to OOS 3.2.8

hello all,
I have a rooted OP3 running the latest TWRP recovery. Using these instructions I am trying to upgrade to 3.2.8 from 3.2.7. There are no errors displayed during OOS or SuperSU install steps.
But when the phone reboots - it stays stuck at the boot animation. This happens across several attempts. I do not have xposed installed, if it helps. Repeating the above steps with a 3.2.7 image works without issues.
Is there any way I can figure out where the 3.2.8 reboot is getting stuck at? I *do not* want to do a fresh install.
Any thoughts/ Suggestions? I have already posted at the above thread and thought I'd try my luck here too.
EDIT: Can a MOD please move this to Q&A forum. Just realized I posted to Guides, News & Discussion.

backup all your data and install 3.2.8 with the official procedure

Sacob said:
backup all your data and install 3.2.8 with the official procedure
Click to expand...
Click to collapse
That's my last option. But that's as good as starting from scratch. In which case, I might as well postpone until Nougat arrives on the OP3

tropicanapure said:
That's my last option. But that's as good as starting from scratch. In which case, I might as well postpone until Nougat arrives on the OP3
Click to expand...
Click to collapse
and wait without a phone?
Flash the new Beta 10. i'm currently using it with root and it works great

Not sure what you mean - without a phone. I was able to roll back to 3.2.7 with zero issues
I was mulling over installing the Beta - but I understand Nougat is due in Jan? Also, is there a process to move to b10 without losing data?
Sacob said:
and wait without a phone?
Flash the new Beta 10. i'm currently using it with root and it works great
Click to expand...
Click to collapse

tropicanapure said:
Not sure what you mean - without a phone. I was able to roll back to 3.2.7 with zero issues
I was mulling over installing the Beta - but I understand Nougat is due in Jan? Also, is there a process to move to b10 without losing data?
Click to expand...
Click to collapse
i got the impression that your phone wasn't booting xD
well, every time i flash those betas (9 and 10) TWRP asks me for a PIN that doesn't exists and to solve that i need wipe everything... so i wouldn't count on that

tropicanapure said:
hello all,
I have a rooted OP3 running the latest TWRP recovery. Using these instructions I am trying to upgrade to 3.2.8 from 3.2.7. There are no errors displayed during OOS or SuperSU install steps.
But when the phone reboots - it stays stuck at the boot animation. This happens across several attempts. I do not have xposed installed, if it helps. Repeating the above steps with a 3.2.7 image works without issues.
Is there any way I can figure out where the 3.2.8 reboot is getting stuck at? I *do not* want to do a fresh install.
Any thoughts/ Suggestions? I have already posted at the above thread and thought I'd try my luck here too.
EDIT: Can a MOD please move this to Q&A forum. Just realized I posted to Guides, News & Discussion.
Click to expand...
Click to collapse
Did you download the full 3.2.8 zip from http://downloads.oneplus.net? I did. And to my surprise, it erases the whole userdata partition, including TWRP backups and downloaded files (including SuperSU zip). So big warning if you try with that zip. I assume that this zip is intended for those reverting from Nougat Beta, to go back from F2FS to EXT4.
My solution was to restore an old TWRP backup that was saved on my PC and then reflash a modified full 3.2.8 zip where the last line in the update script was removed: the one that erases userdata partition. So before flashing full 3.2.8 zip from http://downloads.oneplus.net I recommend you to remove the last line in the update script.

No, I downloaded the Full ZIP from this official thread on the OP3 forums. I was aware of that line though. And from previous experience - the first thing I do when I make a TWRP backup is to move it off the phone. That and I purchased Titanium Backup long time ago. I use it to back up stuff surgically and sync it up to Dropbox every night. The app also seems to have the ability to make a recovery-flashable "update.zip" - something I have yet to try.
Appreciate the heads-up though.
ptblad said:
Did you download the full 3.2.8 zip from http://downloads.oneplus.net? I did. And to my surprise, it erases the whole userdata partition, including TWRP backups and downloaded files (including SuperSU zip). So big warning if you try with that zip. I assume that this zip is intended for those reverting from Nougat Beta, to go back from F2FS to EXT4.
My solution was to restore an old TWRP backup that was saved on my PC and then reflash a modified full 3.2.8 zip where the last line in the update script was removed: the one that erases userdata partition. So before flashing full 3.2.8 zip from http://downloads.oneplus.net I recommend you to remove the last line in the update script.
Click to expand...
Click to collapse

tropicanapure said:
No, I downloaded the Full ZIP from this official thread on the OP3 forums. I was aware of that line though. And from previous experience - the first thing I do when I make a TWRP backup is to move it off the phone. That and I purchased Titanium Backup long time ago. I use it to back up stuff surgically and sync it up to Dropbox every night. The app also seems to have the ability to make a recovery-flashable "update.zip" - something I have yet to try.
Appreciate the heads-up though.
Click to expand...
Click to collapse
OK. I also use TB, and from now on I use cloud storage :laugh:
After the full modified 3.2.8 zip I successfully flashed official SuperSU 2.79, Xposed v87 and Bluspark r25 kernel. I use F2FS on data partition. It boots and runs fine!
The only thing I'm a bit concerned about is that it stays on the bootlogo (OnePlus logo, Powered by Android) for about 25 secs before the bootanimation begins when booting to system. Much faster before. When booting to recovery (TWRP 28, Bluspark) the time on bootlogo is normal (short). Any thoughts on that?

I wish I had, man. You went a number of steps ahead when your phone went past the boot animation
As a afterthought - try looking through your logs.
ptblad said:
OK. I also use TB, and from now on I use cloud storage :laugh:
After the full modified 3.2.8 zip I successfully flashed official SuperSU 2.79, Xposed v87 and Bluspark r25 kernel. I use F2FS on data partition. It boots and runs fine!
The only thing I'm a bit concerned about is that it stays on the bootlogo (OnePlus logo, Powered by Android) for about 25 secs before the bootanimation begins when booting to system. Much faster before. When booting to recovery (TWRP 28, Bluspark) the time on bootlogo is normal (short). Any thoughts on that?
Click to expand...
Click to collapse

[GUIDE] How to flash Android 9 Pie (PixelExperience, Havoc OS etc.)

Hello fellow XDA members and flashaholic people! This is a guide about flashing sGSI or GSI (semi-GSI) Android Pie images on VINCE.
This guide is for VINCE only! Please don't try it on WHYRED it may work or it may not.
First you need to treble enabled custom recovery. I suggest OrangeFox V8.1 https://forum.xda-developers.com/redmi-note-5/development/official-orangefox-recovery-project-t3807479
You can either flash it via TWRP or extract zip and flash recovery img by fastboot method.
Second you need treble enabled custom Oreo ROM, I suggest Cardinal-AOSP as it's vendor.img works flawlessly. https://forum.xda-developers.com/redmi-note-5/development/rom-cardinalaosp-t3774232
And third step includes the GSI image. You can find several GSI's here; https://forum.xda-developers.com/project-treble/trebleenabled-device-development
After downloading .zip file from any ROM you wanted extract it to get its system image and move it into the either internal storage or SD card. [SYSTEM IMAGE ONLY NEEDED]
I tried Pixel Experience 9.20 and Havoc OS 9.18 builds both booted without issues.
Please note that you need GApps package for ROM's (Except PixelExperience) you can find them here; https://opengapps.org/ Suggested package is Nano one. But if you want more you can go for bigger packages. I always use Mini version of it.
Steps to get Pie working on our device:
1. Reboot to custom recovery (if you have) flash OrangeFox R8.1 treble-enabled recovery. [If you have already have OrangeFox Recovery skip this step]
2. Touch Wipe and wipe /system /data /cache /dalvik and format /data
3. Flash cardinal-aosp ROM to your device You do not need to install GApps as we are going to use Pie anyway.
4. After flashing reboot to system it will directly go into launcher without setting stuff up. Reboot your device to recovery again.
5. Touch install, touch install image and flash the system image you've extracted. Wait for it to complete.
5.1 If you installed other than Pixel Experience please install proper GApps right after. [IF GAPPS WONT INSTALL BOOT THE DEVICE INTO SYSTEM FIRST AND WHEN BOOT COMPLETED PLEASE REBOOT RECOVERY AND FLASH GAPPS IT WILL WORK] After GApps installed go to wipe and do a factory reset in recovery. Reboot the device into system.
6. After you set up your device there is several optional operations you can do;
6.1 Root: You can use Magisk v17.1 or above to get root access. [Flash via recovery, if Magisk app wont appear in app menu you can install it from apkmirror safely]
6.2 Modules: Magisk modules like V4A, Unified Hosts Adblock etc. works. [Tested].
6.3 Kernel: You can use Genom Kernel or Dark Ages Tercero kernel. [Tested Dark Ages Tercero, works]
PLEASE KEEP IN MIND I DO NOT DEVELOPING ABOVE GSI IMAGES OR HELPING TO DEVELOP. IF YOU HAVE ANY BUGS TO REPORT PLEASE REPORT IN PROPER FORUM POST. I CAN HELP ABOUT INSTALLATION ONLY.
Ah, and there is few screenshots i'll share (Pixel Experience 9.0):

Don't need to flash p lag fix, volte fix and other stuff?

Ritik17 said:
Don't need to flash p lag fix, volte fix and other stuff?
Click to expand...
Click to collapse
Since i did not have any problems about lag or freeze dont need to flash it. Though im not sure about VoLTE but it seems broken for me too. I still wait for official or unofficial Pie ports (which even redmi 2 and 3 got)

bdogan1912 said:
Since i did not have any problems about lag or freeze dont need to flash it. Though im not sure about VoLTE but it seems broken for me too. I still wait for official or unofficial Pie ports (which even redmi 2 and 3 got)
Click to expand...
Click to collapse
Any other bug or issue that you've found in the ROM? Camera problems? Bluetooth or Wifi's MAC changing or reverting to 00:00:00...? Battery drains, memory leaks, crashes? GPS problems? anything?

moralesnery said:
Any other bug or issue that you've found in the ROM? Camera problems? Bluetooth or Wifi's MAC changing or reverting to 00:00:00...? Battery drains, memory leaks, crashes? GPS problems? anything?
Click to expand...
Click to collapse
In few hours of usage i did not encountered very-serious level bugs. Battery was fine and didn't seemed like to draining. Bluetooth and WiFi had no issues for me either. Only VoLTE doesnt works and as may you know thats global issue on it. Did not faced any mem-leaks or running out of memory problems, with freshest install it used up to 1.3 GB mem and with some apps like social ones it went up to 1.6 to 1.9 GB but ROM was overall butter smooth without single lag or freeze. No FCs either, GPS works i guess it was enabled by default on fresh install as usual but since im not using the GPS that much i did not tested it fully though.
As you can guess those are still experimental/beta builds could have issues that i did not encounter. But overall was very fine for me. I'd keep it but it kinda messed "about phone" settings as it goes manufacturer and model both goes by unknown or phh-treble. It's very natural since i installed as GSI image but still bothered me.
Almost forgot; In Havoc OS settings goes direct crash if you touch battery in settings. PE works fine but it has problems with Dark theme beign not applied correctly. Also i did not used or tried substratum or its themes.

Thank you for your instructions. I wanted to install a GSI 9.0 ROM since Pie came out, but other threads with instructions were too complex or convoluted that I thought it was harder.
I would like to make some clarifications on your steps:
* I used the unofficial PixelExperience 9.0 GSI image, as you said. It feels and behaves almost exactly as the official PixelExperience build for our device, but with nicer interface. The image is HERE. Just as a sidenote, the System image comes with DPI = 360, things look a bit too big. To make it look like MIUI or the official PixelExperience build for vince, a dpi of 390 should be set (this can be done from settings > System > Developer Settings > Minimal Width, under the "draw" section).
1. Reboot to custom recovery (if you have) flash OrangeFox R8.1 treble-enabled recovery. [If you have already have OrangeFox Recovery skip this step]
2. Touch Wipe and wipe /system /data /cache /dalvik and format /data
* At this step, I had to make "Format Data", and only then reboot to recovery again, and make the wipes to all other partitions. Without rebooting the wipes weren't possible (it was showing errors while trying to mount partitions). VENDOR PARTITION SHOULD NOT BE WIPED
3. Flash cardinal-aosp ROM to your device You do not need to install GApps as we are going to use Pie anyway.
4. After flashing reboot to system it will directly go into launcher without setting stuff up. Reboot your device to recovery again.
At this point, you must check that the hardware works correctly. Touch, screen, audio, BT, wifi, RIL, LTE or whatever you use. If something doesn't work at this point, it won't work after installing the GSI image.
5. Touch install, touch install image and flash the system image you've extracted. Wait for it to complete.
* In OrangeFox, at this point before flashing the GSI's .img file, the recovery asks for the type of image. For noobs and careful people, "System Image" must be selected before proceeding.
5.1 If you installed other than Pixel Experience please install proper GApps right after. [IF GAPPS WONT INSTALL BOOT THE DEVICE INTO SYSTEM FIRST AND WHEN BOOT COMPLETED PLEASE REBOOT RECOVERY AND FLASH GAPPS IT WILL WORK] After GApps installed go to wipe and do a factory reset in recovery. Reboot the device into system.
6. After you set up your device there is several optional operations you can do;
6.1 Root: You can use Magisk v17.1 or above to get root access. [Flash via recovery, if Magisk app wont appear in app menu you can install it from apkmirror safely]
* When installing Magisk through recovery, the framework will be installed, but the APK won't appear in the app list. It must be downloaded separately from https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.0/MagiskManager-v6.0.0.apk
The following modules are working without issues in my setup:
* Youtube Vanced
* Google Product Sans font
* MagiskHide Props Config
6.2 Modules: Magisk modules like V4A, Unified Hosts Adblock etc. works. [Tested].
6.3 Kernel: You can use Genom Kernel or Dark Ages Tercero kernel. [Tested Dark Ages Tercero, works]
Cast and mirror screen are broken. After choosing a screen to share the phone's screen to, SystemUI will crash. Apps with cast capabilites won't detect Chromecast devices (the cast button won't appear).
Thank you for your help

moralesnery said:
The following modules are working without issues in my setup:
* Youtube Vanced
* Google Product Sans font
* MagiskHide Props Config
6.2 Modules: Magisk modules like V4A, Unified Hosts Adblock etc. works. [Tested].
6.3 Kernel: You can use Genom Kernel or Dark Ages Tercero kernel. [Tested Dark Ages Tercero, works]
Thank you for your help
Click to expand...
Click to collapse
I don't know what is "MagiskHide Props Config" but is MagiskHide working normally for you?
I'm currently using the Pie "V4 zip" from this thread but MagiskHide isn't working. If it is working normally for you I will try to flash in your way then.
And can I flash 9.0 GSI image over any 8.x roms? Or it must be PE or Havoc?

Can't Show the Image File
After extracting the Hovac OS GSI file (a link that given) can not show Image file it shows file different files in different formats.

GizPrime said:
After extracting the Hovac OS GSI file (a link that given) can not show Image file it shows file different files in different formats.
Click to expand...
Click to collapse
This is the correct link, you don't downloaded gsi file (I did the same thing, currently running Havoc 9 ):
https://sourceforge.net/projects/havoc-os/files/arm64aonly/

sadly i can't flash pie rom because my phone is encrypted. i will try this someday, once i backup my files and do the full format (including internal storage)
i want to try PE pie

Biggest thanks to you as i was in dilemma to try the PE 9.0.
However, the stock camera is so dark so i installed Camera2API, resulting the camera app FC, installed the crashfix Gcam apk i found somewhere in this thread not so long ago to no avail, the camera is still broken. Anyone having the issue ?
TIPS: I tried both Dark Ages and Genom Kernel, the brightness is crazy, i think its the late display driver provided within it: the brightness level is scaled incorrectly, with the 50% on MIUI is 0% in PE, and 50% in PE is equal to 100% of MIUI (the max brightness is at 50% and sliding all over to the right does nothing); clean flashed the whole thing and not using custom-installed kernel at all.

HungNgocPhat said:
I don't know what is "MagiskHide Props Config" but is MagiskHide working normally for you?
I'm currently using the Pie "V4 zip" from this thread but MagiskHide isn't working. If it is working normally for you I will try to flash in your way then.
And can I flash 9.0 GSI image over any 8.x roms? Or it must be PE or Havoc?
Click to expand...
Click to collapse
MagiskHide Props Config" its a module that replaces the ROM's fingerprint with a certified one. This way you get ctsProfile: true and basicIntegrity: true, thus passing SafetyNet. This combined with MagiskHide allows me to use some apps that rely on SafetyNet.
After flashing the Treble-enabling ROM (Cardinal OS) you can install GSI system images based on Oreo or Pie.

Is hotspot working in PIE GSI?

dahrel22 said:
sadly i can't flash pie rom because my phone is encrypted. i will try this someday, once i backup my files and do the full format (including internal storage)
i want to try PE pie
Click to expand...
Click to collapse
If you use orange fox recovery you can wipe encripted partitions and flash custom roms, try it!

Wyneg said:
If you use orange fox recovery you can wipe encripted partitions and flash custom roms, try it!
Click to expand...
Click to collapse
seems like i need to do a format data in recovery. but right now i cant afford to loose all my files in internal storage. once i back up all my file then i will do the format data.
i wish there is some way to decrypt my storage without formatting
btw, i got my storage encrypted because i flashed miui stable rom

it's work but hotspot doesn't work
in cadinal i already check it's work but in gsi have a problem

And.. what If I installed a Treble ROM and I want to go back to stock MIUI, or a non-treble ROM? What should I wipe before going back?

moralesnery said:
And.. what If I installed a Treble ROM and I want to go back to stock MIUI, or a non-treble ROM? What should I wipe before going back?
Click to expand...
Click to collapse
If you do same wipes what you did to flash GSI it's totally ok

expextors said:
it's work but hotspot doesn't work
in cadinal i already check it's work but in gsi have a problem
Click to expand...
Click to collapse
Weird cause hotspot is working fine for me. My kids phone is able to connect without any problems.

soyti2x said:
Weird cause hotspot is working fine for me. My kids phone is able to connect without any problems.
Click to expand...
Click to collapse
i tried on havoc it doesn't work what your gsi you used ? i can't open hotspot because always off when turn on

First time flashing an open beta from stock, non-rooted and locked bootloader

I am looking forward to flash the upcoming pie open beta on my stock, non-rooted 5t with locked bootloader and got some questions:
1. Do I need to register somewhere to be part of a beta program like it is with the google pixel line?
2. Are there OTAs where I do not have to wipe my storage or is there just one zip?
3. Is it even possible to go from stable to beta without wiping the storage?
4. Can I flash the zip via the settings app like I did several times with oxygen updater?
5. Can I go back to stable OOS version when pie is finally released without wiping? Even though: what would be wiped? Just apps or photos as well?
6. What version must I be on to flash a beta? I am currently running OOS 5.1.6 . Didn't update to 5.1.7 because I heard some people have insane battery drain
Looking forward for some answers!
Thanks

First of all there's no Android Pie in OP 5T Beta Oxygen OS yet.
Leaked Pie is Hydrogen OS which is official ROM for China, but it does not include Google Apps and you have to unlock bootloader in order to switch between HydrogenOS and OxygenOS. Unlocking bootloader will wipe EVERYTHING on your phone.
1. No
2. No, you have to download full zip in order to switch from stable to beta and you have to backup EVERYTHING on your phone before you do so.
3. Only with unlocked bootloader and custom recovery, but unlocking bootloader wipes everything on your phone.
4. No, zip downloaded from OnePlus' site must be flashed in recovery.
5. You can go back, but it will wipe everything on your phone.
6. It doesn't matter as you will be flashing full rom.

thanks a lot for your answers!
Youtube has some videos where people flash an open beta via settings menu over a stable image without loosing data but that must be somehow wrong.
Got another question regarding whatsapp:
This year there were news that whatsapp changed their backup service to be somehow different. I got very old chats on my phone I want to keep. I do daily google drive automatic backups.
If I restore my whatsapp after flashing the open beta. Will get all my chats back or will there be something missing?
thanks for the quick answer!

You don't have to wipe or unlock anything. Read official instruction: https://www.oneplus.com/pl/support/softwareupgrade/details?code=7

collection rom Gsi 9/10 for realmeQ/5pro

Hello !!!
Gsi Rom for realme Q
This is the best version for realme Q.Works well, but fingerprint error, hope someone can fix it
Installation Instructions:
1. Download the GSI from the links above, and uncompress it.
2. Wipe Data, Dalvik, and Cache,system . No wipe vendor
3. Remove Magisk if it was previously installed, by using its uninstaller script. Magisk files are stored in the kernel image, and in the /data/adb folder, which are left untouched when wiping data and flashing the GSI. Another option is to flash your stock rom and manually delete the content of the /data/adb folder.
4. Flash the GSI to system partition (AB devices : flashing a vbmeta.img file for your device may also be required).
5. Boot and perform a factory reset.
6. (Optional) Reboot and flash Magisk, and maybe additional files.
7. Reboot and Enjoy.
If you want to update rom, you can also always try to dirty flash, i.e. wipe Dalvik and Cache (not Data) and flash System image. But if you experience a strange behavior, a clean flash may be required
Note : if flash Gapps you need resize system in teamwin,then flash gapps
Which vendor to use?
1. Always use your actual device's vendor
2. Always use OEM unmodified vendor, not some custom vendor
3. This includes boot.img. boot.img and vendor MUST BE the same version.
Rom download :
Link download android 9 rr7.0 : https://drive.google.com/file/d/1--pQfJlNR2V9OEFeLCoT--tmftT8OFGZ/view?usp=drivesdk
link download android 10 AOSP : Download
Link download Rom Msm 9 : Download
How to fix bug any rom:
Link download fix lag,fix bt audio,fix mtp,fix power rom havoc,magisk stable for android Q and more ..
Folder click here

Great, found your thread on telegram, this is what I need, I am fed up with Color OS

It's not half bad but there are two major problems with the ROM. First it seems it can't read exfat 128 GB as card which is a shame for I won't format it to inferior fat32 to lose all my stuff. Second, whenever I set a screen lock, no matter what kind of it'll tell me that I entered incorrect code. Means I cannot lock the screen with any kind of security measure. I could solve the external as card issue by flashing lineage os boot.img but I couldn't the screen lock issue. Aside these I have no problem. Testing other gsi ROMs.
Edit.: No. Screen lock isn't rom but vendor issue. I accidentally wiped vendor partition before flashing the image.

greenys' said:
It's not half bad but there are two major problems with the ROM. First it seems it can't read exfat 128 GB as card which is a shame for I won't format it to inferior fat32 to lose all my stuff. Second, whenever I set a screen lock, no matter what kind of it'll tell me that I entered incorrect code. Means I cannot lock the screen with any kind of security measure. I could solve the external as card issue by flashing lineage os boot.img but I couldn't the screen lock issue. Aside these I have no problem. Testing other gsi ROMs.
Edit.: No. Screen lock isn't rom but vendor issue. I accidentally wiped vendor partikon before flashing the image.
Click to expand...
Click to collapse
I will note that people do not wipe vendor

29y6145 said:
I will note that people do not wipe vendor
Click to expand...
Click to collapse
I just noticed that I didn't wipe vendor either. It's not even in the wipeable section if you try advanced wipe. For some reason if I go from one gsi to another lock screen password/pattern will not work. I have to flash stock zip first, then wipe data, system, cache, davlik and at last flash gsi image. Between going from one gsi to another you have to do this in order to keep lock screen password function. Right now I'm struggling with Magisk Safetynet. Any good method to bypass?

greenys' said:
I just noticed that I didn't wipe vendor either. It's not even in the wipeable section if you try advanced wipe. For some reason if I go from one gsi to another lock screen password/pattern will not work. I have to flash stock zip first, then wipe data, system, cache, davlik and at last flash gsi image. Between going from one gsi to another you have to do this in order to keep lock screen password function. Right now I'm struggling with Magisk Safetynet. Any good method to bypass?
Click to expand...
Click to collapse
I realized that. Today I tested android Q on realme Q, it worked. I cannot set the screen password, the system only allows swiping. I am looking into this problem.

29y6145 said:
I realized that. Today I tested android Q on realme Q, it worked. I cannot set the screen password, the system only allows swiping. I am looking into this problem.
Click to expand...
Click to collapse
Flashing stock vendor img solved the issue on my device. Although I tried AOSP Pie not Q.

update android 10 and permissiver for andoid 10

Update Installation Instructions .

Hi, awesome thread, congrats to you @29y6145.
I see now that you added two more ROMs, the AOSP10 and the MSM-Xtended 9. Any of them are more stable than the others? I was looking for stability in the entire OS and Camera that any other thing.
By the way, Why you remove the links to TWRP and Permissiver_v5?
I installed the Resurrection Remix 7.0.2 and see that doesn't have Magisk by default. I should install Magisk via your TWRP built-in Magisk installer or from the official Magisk website?

Tmv_Josue said:
Hi, awesome thread, congrats to you @29y6145.
I see now that you added two more ROMs, the AOSP10 and the MSM-Xtended 9. Any of them are more stable than the others? I was looking for stability in the entire OS and Camera that any other thing.
By the way, Why you remove the links to TWRP and Permissiver_v5?
I installed the Resurrection Remix 7.0.2 and see that doesn't have Magisk by default. I should install Magisk via your TWRP built-in Magisk installer or from the official Magisk website?
Click to expand...
Click to collapse
I am editing some posts, and will re upload important files.
Both of the 2 Roms you speak are fine. I will give you a tutorial about the Havoc rom.
I have upload permissiver #1

29y6145 said:
I am editing some posts, and will re upload important files.
Both of the 2 Roms you speak are fine. I will give you a tutorial about the Havoc rom.
I have upload permissiver #1
Click to expand...
Click to collapse
Did you manage to pass safetynet with gsi?

greenys' said:
Did you manage to pass safetynet with gsi?
Click to expand...
Click to collapse
You try

@29y6145
This Petnoire's_SafetyNet_Spoofer_magisk.zip should be used instead of the Realme5ProColorOSMagiskFixBETA.zip?
Or both should be flashed?

Tmv_Josue said:
@29y6145
This Petnoire's_SafetyNet_Spoofer_magisk.zip should be used instead of the Realme5ProColorOSMagiskFixBETA.zip?
Or both should be flashed?
Click to expand...
Click to collapse
You use Petnoire's_SafetyNet_Spoofer_magisk or module safeynet in magisk .
Im use module safety in magisk It works perfectly.

@29y6145
What is exactly the name of that Magisk's Safety module that you mentioned?
I searched in Magisk and only found hackintosh5's SafetyPatch and Didgeridoohan's MagiskHide Props Config.
Is any of them?

My realme Q device has unlocked BL and installed TWRP, while using lineage oS 16 Android P, how to refresh this Android Q GSI image? Is it refreshed directly with TWRP REC?

@TrancyMeng.
*Any ROM in IMG format should be flashed trought Fatboot, but you need to wipe the other installation first, in adb run this to enter in TWRP:
adb reboot recovery
Then in TWRP:
*Wipe > System, Data, Cache, Dalvik
*Reboot > BootLoader (Fastboot)
Then in Fastboot/Bootloader run this command:
fastboot flash system romNAME.img
Reboot to recovery/TWRP and flash:
Permissiver_v5.zip

After refresh the Andrews Q GSI ROM, why the speaker will have a current sound, and call and play the local media file will not. How to troubleshise the patch to do it? Can you trouble with you to provide a patch for the repair sound?

THREAD CLOSED!
@29y6145 Please consult the inbox of your private messages.

How backup current android 7 rom and install new android 10 rom?

Hi, I need your help to backup my current ROM and to update to some Android 10 custom ROM.
I am currently on a very old OOS based custom ROM with a rooted android version 7.1.1 (encrypted) and TWRP 3.2.1-0.
From what I remember, this TWRP version I have is bugged so that I cannot restore backups with it. However, since everything worked in the last years I didn't touch anything.
So, I want to..
1. backup my whole system and
2. install new custom ROM
Can someone tell me the steps I have to do?
I guess I have to..
1. Flash new TWRP (which one?)
2. Backup my partitions (does this work with a new TWRP for Android 7? Or would I need to use an older version?)
3. Install recent OOS firmware (which one and how? just flash it in TWRP?)
4. Wipe cache and data
5. Install new custom ROM
6. Install Magisk
7. Install Xposed
Is this correct?

I recently did the same thing. Your steps are correct, although I would add a couple more.
TWRP backup, TIBU backup, SMS backup, Then move all of those backups to your computer. Plus any contents of [Download, Documents, Pictures, Videos, DCIM, etc. ]
Download OOS from here, https://www.oneplus.com/support/softwareupgrade/details?code=PM1574156155944
This will completely reset you to factory. so you will need to set up the phone just enough to get developer mode on*, enable ADB*, & Unlock Bl
** I forgot this part and tried going to fastboot and directly flashing TWRP and got strange errors bc ADB wasn't enabled.
> Flashboot install recovery TWRP
Then I struggled with a few ROMS, but finally got CR Droid to install.
I flashed each file listed here, https://forum.xda-developers.com/oneplus-5t/development/rom-crdroid-android-6-t3972533

Hey there, thanks so far.
But would you install newest TWRP first before backing up, right? Or Will the newest version of TWRP not work anymore with android 7.1.1?
And do you use normal TWRP or Bluspark version?
Edit: I think I would prefer to just install the OOS firmware because I don't have a windows system anymore so I can't do the ADB stuff via command line. Or I guess I would have to setup a VM with windows installed.. O_x