Related
I bought I9082 from China Unicom (which I believe is firmware locked).
I tried to upgrade the firmware manually through ODIN.
But in ODIN it stops at setup connection
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I rooted with CWM and loaded Custom ROM.
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
I am able to receive calls and messages
Do you have any solution for this.
Does this mean the firmware is locked?
Any possibility that I can revert back to original stock ROM I9082ZNAMB3
I have this stock ROM downloaded but could not load this through ODIN (seems there is some lock since it stops at setup connection in ODIN).
Any possibility that this stock ROM can loaded through CWM?
My phone is kind of half-bricked since I couldn't make any call also not able to upgrade.
Please give me solution.
mr_coimbatore said:
I bought I9082 from China Unicom (which I believe is firmware locked).
I tried to upgrade the firmware manually through ODIN.
But in ODIN it stops at setup connection
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I rooted with CWM and loaded Custom ROM.
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
I am able to receive calls and messages
Do you have any solution for this.
Does this mean the firmware is locked?
Any possibility that I can revert back to original stock ROM I9082ZNAMB3
I have this stock ROM downloaded but could not load this through ODIN (seems there is some lock since it stops at setup connection in ODIN).
Any possibility that this stock ROM can loaded through CWM?
My phone is kind of half-bricked since I couldn't make any call also not able to upgrade.
Please give me solution.
Click to expand...
Click to collapse
you may experience "no service " after rom installation here is what u do to get it back...
its a modem compatibility issue in between different firmwares
download the file from http://www.mediafire.com/?avjo48kvgz517z5 or http://d-h.st/7O8 NEW MODEM LINK
put ur mobile in download mode VOLUME DOWN + MENU + POWER then VOLUME UP to continue
connect to pc
(ur kies should not be runing... proper drivers should be installed)
start odin3 v3.04 . u should see the blue comxx as phone is connected
autoreboot and reset time should be selected.
click in PDA . select the modem.amc8.tar
click start...wait....u get pass confirmation..phone may boot into recovery just reboot.
JUST leave the feedback on this... it worked for me....so it may work for all of u.
Hi, I could not download any file through Odin. I tried pushing the modem file already. Do you think there is any firmware lock?
During setup connection it stays for long time and then it says failed.
Any modem MOD file to push through ClockworkMod I can try.
mr_coimbatore said:
Hi, I could not download any file through Odin. I tried pushing the modem file already. Do you think there is any firmware lock?
During setup connection it stays for long time and then it says failed.
Any modem MOD file to push through ClockworkMod I can try.
Click to expand...
Click to collapse
follow this guide http://forum.xda-developers.com/showthread.php?t=2280248 . make ur own custom rom from ur stock firmware & flash it u will have ur radios back.
or contact @tonylin880806 he is trying to make one rom for ur device.
Hi, Do you know why I could not upgrade firmware or push anything through ODIN?
mr_coimbatore said:
Hi, Do you know why I could not upgrade firmware or push anything through ODIN?
Click to expand...
Click to collapse
it may be carrier locked!!!
unlock carrier lock
k2wl said:
it may be carrier locked!!!
Click to expand...
Click to collapse
Any solution to unlock this carrier locked phone without buying the unlock tools?
mr_coimbatore, I'm having exactly the same problem with a China Unicom I9082 here in Shanghai. Sadly I still haven't been able to find a solution, after weeks of searching.
It's actually a friend's phone, he bought it because he wanted a dual SIM Android handset, though foolishly bought it straight from Unicom rather than from an electronics market. I told him I'd get rid of the China Unicom firmware for him as it is obviously crippled by design like all Chinese Android stock ROMs. I've managed to install k2wl's Ultralite ROM on the handset but I'm facing the same issue as you - the baseband remains untouched from the one that was on the original ROM (I9082ZNAMB3), but it's stuck in flight mode. Can receive calls/texts, cannot make them.
The big clue that there is some kind of lock in place is the fact that one of the original Chinese logos still appears on boot. Flashing a custom ROM should remove all the stock boot logos.
I get exactly the same error when trying to update the baseband with Odin (I tried several basebands and all had exactly the same error as the one you quoted in your first post), so it seems that what we have here is a baseband lock combined with an incompatibility between the existing baseband and the custom ROM (or, more likely, any ROM that isn't the stock ROM provided by China Unicom). If we can remove the baseband lock and update the baseband to one that is compatible with the custom ROM, we should be in business. Sadly, that's as far as I've got.
The annoying thing is that the SIM cards being used on the phone are both China Unicom, so it's not as if I even need the phone to be factory unlocked for use on any network - I simply need it to be able to make outgoing calls/texts on Unicom!
I have seen sites offering an unlock service by IMEI, for example unlocksamsungonline.com, who claim to provide both NCK (network unlock codes) and SPCK (service provider unlock codes), which seem to be what we need in order to unlock the phone without expensive equipment.
However, I have no idea how genuine/reliable these kinds of sites are or if they even work at all (or if they're even legitimate at all), and I'd rather not spend $18.95 USD on an unlock code that doesn't end up working. Also, given that it's a dual SIM phone it's going to have 2 IMEI numbers, so I'm not sure if I'd have to pay double to unlock it or if just one would do the trick!
I've not yet had the time to take the phone to an electronics market in the hope that somebody there understands the issue and has the equipment to remove the baseband lock. In almost all of my previous experiences with electronic markets here in Shanghai, I've found that their hardware knowledge is fantastic (not surprising given that the phones are made in China), but their software knowledge is generally quite poor. I actually spent almost an hour one day explaining to an iPhone engineer that he could in fact upgrade an iPhone's software while preserving an (unlockable) baseband, simply by making a custom ISPW with Pwnagetool or similar that would flash the new firmware without flashing the baseband. He and several of his coworkers claimed that it was impossible, and when I showed them my iPhone that was running the updated iOS while still on an old baseband, until I managed to explain the entire process he thought I had hacked the phone somehow to display a different baseband version... the whole experience was incredibly frustrating and to be honest has left me thinking that I can probably find out more online whenever I've had any kind of software issues with any devices.
Anyway. If you happen to have some success before I do, please let me know! I'll do the same.
Solution
kinggimped said:
mr_coimbatore, I'm having exactly the same problem with a China Unicom I9082 here in Shanghai. Sadly I still haven't been able to find a solution, after weeks of searching.
It's actually a friend's phone, he bought it because he wanted a dual SIM Android handset, though foolishly bought it straight from Unicom rather than from an electronics market. I told him I'd get rid of the China Unicom firmware for him as it is obviously crippled by design like all Chinese Android stock ROMs. I've managed to install k2wl's Ultralite ROM on the handset but I'm facing the same issue as you - the baseband remains untouched from the one that was on the original ROM (I9082ZNAMB3), but it's stuck in flight mode. Can receive calls/texts, cannot make them.
The big clue that there is some kind of lock in place is the fact that one of the original Chinese logos still appears on boot. Flashing a custom ROM should remove all the stock boot logos.
I get exactly the same error when trying to update the baseband with Odin (I tried several basebands and all had exactly the same error as the one you quoted in your first post), so it seems that what we have here is a baseband lock combined with an incompatibility between the existing baseband and the custom ROM (or, more likely, any ROM that isn't the stock ROM provided by China Unicom). If we can remove the baseband lock and update the baseband to one that is compatible with the custom ROM, we should be in business. Sadly, that's as far as I've got.
The annoying thing is that the SIM cards being used on the phone are both China Unicom, so it's not as if I even need the phone to be factory unlocked for use on any network - I simply need it to be able to make outgoing calls/texts on Unicom!
I have seen sites offering an unlock service by IMEI, for example unlocksamsungonline.com, who claim to provide both NCK (network unlock codes) and SPCK (service provider unlock codes), which seem to be what we need in order to unlock the phone without expensive equipment.
However, I have no idea how genuine/reliable these kinds of sites are or if they even work at all (or if they're even legitimate at all), and I'd rather not spend $18.95 USD on an unlock code that doesn't end up working. Also, given that it's a dual SIM phone it's going to have 2 IMEI numbers, so I'm not sure if I'd have to pay double to unlock it or if just one would do the trick!
I've not yet had the time to take the phone to an electronics market in the hope that somebody there understands the issue and has the equipment to remove the baseband lock. In almost all of my previous experiences with electronic markets here in Shanghai, I've found that their hardware knowledge is fantastic (not surprising given that the phones are made in China), but their software knowledge is generally quite poor. I actually spent almost an hour one day explaining to an iPhone engineer that he could in fact upgrade an iPhone's software while preserving an (unlockable) baseband, simply by making a custom ISPW with Pwnagetool or similar that would flash the new firmware without flashing the baseband. He and several of his coworkers claimed that it was impossible, and when I showed them my iPhone that was running the updated iOS while still on an old baseband, until I managed to explain the entire process he thought I had hacked the phone somehow to display a different baseband version... the whole experience was incredibly frustrating and to be honest has left me thinking that I can probably find out more online whenever I've had any kind of software issues with any devices.
Anyway. If you happen to have some success before I do, please let me know! I'll do the same.
Click to expand...
Click to collapse
Hi, Yes I found the solution.
Thanks to tonylin880806 who provided me some links.
I am in Shanghai as well. I took my phone to electronics markets in Xujiahui and Zhangyang Road. In both places, every one said they cannot do anything. The reason may be they don't know or do not want to take any risk or bricking the phone.
Also I went to Samsung service center, they said I have void my warranty. I asked them only to restore the original firmware. But he said the only option is to change the CPU and that will cost more money. I asked for alternate options and he said no.
Then, I re-explored the posts asked if Tony has send me an option
At first, you should upgrade ZNAMB3 to ZNAMD1 with Odin. ZNAMD1 is the office OTA upgrade for ZNAMB3 sent by Samsung.
You can use below link for ZNAMD1 : http://pan.baidu.com/share/link?shar...&uk=3590848074
to download ZNAMD1 which is official and push this through Odin.
So now you will be back with your original firmware without google account.
After this, you can root the phone with CWM.
Then you can load any compatible custom ROMs. But you should note that our handsets cannot load firmwares of all countries. Might be they are firmware locked or modem not compatible for other region firmwares.
I have loaded below custom ROM which is very similar to original firmware with google account. This is really good.
ZNAMD1_rc2 - http://pan.baidu.com/share/link?shareid=517042&uk=2030731697
Also, in this your memory card is swapped with internal memory and have chrome browser. USB OTG is missing.
Only problem I face is, when I install google talk apk there is some problem. Whenever I get an incoming notification from google talk, it hangs and it says process.google.com stopped. So I have installed hangout and its ok with hangout now.
Hope this helps you.........
mr_coimbatore said:
Hi, Yes I found the solution.
Thanks to tonylin880806 who provided me some links.
I am in Shanghai as well. I took my phone to electronics markets in Xujiahui and Zhangyang Road. In both places, every one said they cannot do anything. The reason may be they don't know or do not want to take any risk or bricking the phone.
Also I went to Samsung service center, they said I have void my warranty. I asked them only to restore the original firmware. But he said the only option is to change the CPU and that will cost more money. I asked for alternate options and he said no.
Then, I re-explored the posts asked if Tony has send me an option
At first, you should upgrade ZNAMB3 to ZNAMD1 with Odin. ZNAMD1 is the office OTA upgrade for ZNAMB3 sent by Samsung.
You can use below link for ZNAMD1 : http://pan.baidu.com/share/link?shar...&uk=3590848074
to download ZNAMD1 which is official and push this through Odin.
So now you will be back with your original firmware without google account.
After this, you can root the phone with CWM.
Then you can load any compatible custom ROMs. But you should note that our handsets cannot load firmwares of all countries. Might be they are firmware locked or modem not compatible for other region firmwares.
I have loaded below custom ROM which is very similar to original firmware with google account. This is really good.
ZNAMD1_rc2 - http://pan.baidu.com/share/link?shareid=517042&uk=2030731697
Also, in this your memory card is swapped with internal memory and have chrome browser. USB OTG is missing.
Only problem I face is, when I install google talk apk there is some problem. Whenever I get an incoming notification from google talk, it hangs and it says process.google.com stopped. So I have installed hangout and its ok with hangout now.
Hope this helps you.........
Click to expand...
Click to collapse
Dude thanks so much for the walkthrough, I'm going to try that right now!
However, your first link doesn't work. Can you fix it so I can download the ZNAMD1 firmware please?
kinggimped said:
Dude thanks so much for the walkthrough, I'm going to try that right now!
However, your first link doesn't work. Can you fix it so I can download the ZNAMD1 firmware please?
Click to expand...
Click to collapse
First link is the official firmware ZNAMD1. You can even download the same from samfirmware or anyother websites.
mr_coimbatore said:
First link is the official firmware ZNAMD1. You can even download the same from samfirmware or anyother websites.
Click to expand...
Click to collapse
Yeah, the link you posted has the '...' in it, which ruins the URL. It's the not the complete URL. Do you have the full URL to download it on Baidu? It will be much faster than downloading it from another site, as you know from living in China and having to deal with Chinese internet connections
I just want to make sure I'm downloading the correct version. Is this the right one?
http://pan.baidu.com/share/link?shareid=419656&uk=554171356
---------- Post added at 10:40 PM ---------- Previous post was at 09:54 PM ----------
I got it working. Thanks SO much for your help, my mate will be really happy with it! All he wanted was Google stuff. That updated firmware did the job.
Thanks again!
Google Talk is now replaced by hang out..
Sent from Gt-I9082 stock AMCD firmware
hangout is cool
mr_coimbatore said:
Hi, Yes I found the solution.
Thanks to tonylin880806 who provided me some links.
I am in Shanghai as well. I took my phone to electronics markets in Xujiahui and Zhangyang Road. In both places, every one said they cannot do anything. The reason may be they don't know or do not want to take any risk or bricking the phone.
Also I went to Samsung service center, they said I have void my warranty. I asked them only to restore the original firmware. But he said the only option is to change the CPU and that will cost more money. I asked for alternate options and he said no.
Then, I re-explored the posts asked if Tony has send me an option
At first, you should upgrade ZNAMB3 to ZNAMD1 with Odin. ZNAMD1 is the office OTA upgrade for ZNAMB3 sent by Samsung.
You can use below link for ZNAMD1 : http://pan.baidu.com/share/link?shar...&uk=3590848074
to download ZNAMD1 which is official and push this through Odin.
So now you will be back with your original firmware without google account.
After this, you can root the phone with CWM.
Then you can load any compatible custom ROMs. But you should note that our handsets cannot load firmwares of all countries. Might be they are firmware locked or modem not compatible for other region firmwares.
I have loaded below custom ROM which is very similar to original firmware with google account. This is really good.
ZNAMD1_rc2 - http://pan.baidu.com/share/link?shareid=517042&uk=2030731697
Also, in this your memory card is swapped with internal memory and have chrome browser. USB OTG is missing.
Only problem I face is, when I install google talk apk there is some problem. Whenever I get an incoming notification from google talk, it hangs and it says process.google.com stopped. So I have installed hangout and its ok with hangout now.
Hope this helps you.........
Click to expand...
Click to collapse
isit this rom ZNAMD1_rc2 hhas French in its language list ? I have one to put french language !
Thx advanced !
it also work on a Unicom duos thx you @mr_coimbatore , after ZNAMD1 I flashed this I9082XXAMF7 custom rom and work correctly ...both sim working fine !!
I9082xxamf7
psytr0nic said:
it also work on a Unicom duos thx you @mr_coimbatore , after ZNAMD1 I flashed this I9082XXAMF7 custom rom and work correctly ...both sim working fine !!
Click to expand...
Click to collapse
Hi, Can you please send me the link from where you downloaded I9082XXAMF7 custom rom.
mr_coimbatore said:
Hi, Can you please send me the link from where you downloaded I9082XXAMF7 custom rom.
Click to expand...
Click to collapse
I took it there : #LINK not really customized , just rooted . Roms are 100% samsung stock one according to OP and what I saw too . nothing missing .
psytr0nic said:
I took it there : #LINK not really customized , just rooted . Roms are 100% samsung stock one according to OP and what I saw too . nothing missing .
Click to expand...
Click to collapse
Thanks for the link. It works perfectly.
XXAMF7 got loaded on the baseband version of ZNAM2.
I have the same problem like yours. As soon as it was loaded it said there is a software update, but when say OK to update the software it keeps searching. Have you got any solution for this?
Also, did you try if you upload the stock ROM of XXAMF7 on the unicom Duos? Whether the radio works?
psytr0nic said:
I took it there : #LINK not really customized , just rooted . Roms are 100% samsung stock one according to OP and what I saw too . nothing missing .
Click to expand...
Click to collapse
After update, firmware is still 4.1.2??
Do you have USB on the go (OTG) option. (Means can you connect the USB flash drive to you mobile by means of a adaptor cable??
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I would also like to know the answer to this question as I have a New Zealand international model but the rom is old. Can I flash the UK version which is the most uptodate. (I have the wifi version).
Thanks
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
colint3 said:
I decided to give it a try myself.
I flashed the latest BTU N5110XXBMF2 which worked a treat. I checked and this is what is displayed
Custom Binary Download = No
Current Binary = Samsung Official
System Status = Official
So it worked fine for me.
Click to expand...
Click to collapse
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
deviant_cryptic said:
Hello. I am also having this issue, with a GT-N5110 from canada. May I ask the steps in which you flashed the firmware? Did you do it via Odin?
Click to expand...
Click to collapse
I just downloaded the firmware and used Odin. It didn't wipe the sdcard it just updated the apps. Its worked well ever since.
I have since updated to N5110XXCMK1 using the same method.
Regards
Colin
Thanks. I used the same method to flash 4.2.2 on my device. I am also now on xxcmk1.
Sent from my GT-N5110 using Tapatalk
flash counter
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
miguel0706 said:
Hi guys! I was looking to know about this. And I got a few question:
1. I want to make sure about the flash counter. If I change to XXCMK1 my rom, the flash counter goes to 1, or would be like the note 8.0 came with that stock room (nothing change in the counter)?
2. It is a little off of the main question but I will ask anyway: have you tried to add icloud email to the native email manager in the XXCMK1 rom? (Asking just in case you did it, since I read that rom is the one that doesnt have problem to set up in the native email manager?
Thank you guys (literally). I will appreciate your answers.
Click to expand...
Click to collapse
1. My flash counter did not change when I flashed 4.2.2 using Odin.
But it did when I used auto cf root afterwards to root the phone.
2. Nope I haven't tried.
Sent from my GT-N5110 using Tapatalk
More...
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
miguel0706 said:
Thank you for the answer.
I got another questions guys. Because it is from another country (the version I choose is from UK) and I am in USA, Do I going to have any problem with the apps from google play? I wondering. Thank you again.
Click to expand...
Click to collapse
have you found the answer?
yeeahnick said:
have you found the answer?
Click to expand...
Click to collapse
Not yet? Now im just waiting for the update to kitkat
i am having this prob too. does my gt-i9300 need to be rooted to flash a stock firmware from different country?
qingyaoli said:
First, thank you guys. Just bought a note 8 WiFi version GT-5110. It is a good device, loved it. I've been researching and reading all over the posts about rooting, install custom rom, firmware and etc... I guess the first thing to do is to root my note 8. So, before I root my device I want to know for sure I can return back to original unmodified stock. I found that I can use ODIN to flush official firmware. However, I checked samMobile for the firmware for my country which is Canada. But I couldn't find. I used toolkit to check my note 8 firmware. It is N5110XXBMC9 and the region is XAC. It is the oldest. Hate it, we are so close to the us but always treated differently, and very thing is more expensive.
Question:
1 Can I just flash US region firmware? Since I have the WiFi, it has nothing to do with the phone and carrier. Or, can someone tried to flush a different region firmware tell me what is the outcome.
2 If I flash an US firmware, will I still able to claim warranty in Canada(just in case).
3 Will Flushing firmware with ODIN increase flush count, even I flush with official stock?
4 Last question, after rooting, will note 8 achieve floating multiwindow like note 10. Or, we are still limited to have to window side by side, but with rooting, we can put more apps to choose.
I know you guys are busy, if anyone can help me or point a useful post for me I would be really appreciated.
Click to expand...
Click to collapse
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
LHNothing said:
I had an issue where I (think) I soft-bricked my device, as I could not get it to boot up, it would get stuck on the "samsung" logo and then display a black screen and go no further. My device is Canadian as well, and was running stock Canadian firmware, but I had rooted it before hand and was attempting to flash firmware from another country.
Well, I ended up downloading the US firmware for 4.2.2 from another thread here on XDA and flashed that in a last attempt to fix it, and it worked! But now I'm running US firmware. Since the KitKat update is now available in Canada, I'm downloading that as we speak and am going to flash it when it's done.
Click to expand...
Click to collapse
Update: flashing went great, just had to remove the .md5 at the end of the ROM file. Everything seems to be in order.
I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
GreatGrizzwald said:
I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
Click to expand...
Click to collapse
Sammobile has all the stock firmwares for our phones, check there. Also check in about phone to see what it says, if it says Baseband unknown, then the EFS folder (and subsequently IMEI #, etc) have been corrupted. It's possible flashing the latest stock firmware will fix it (it includes a new modem and all), so try that first.
http://www.sammobile.com/
absinthesummer said:
Sammobile has all the stock firmwares for our phones, check there. Also check in about phone to see what it says, if it says Baseband unknown, then the EFS folder (and subsequently IMEI #, etc) have been corrupted. It's possible flashing the latest stock firmware will fix it (it includes a new modem and all), so try that first.
Thank you very much for the advice. I am downloading the firmware now. baseband version is showing i317ucama4. Right now the phone is not activated with AT&T, is there a way I could test if I will be able to get cellular data before going to AT&T and activating it?
Click to expand...
Click to collapse
Well you're baseband is good. Just get a little cheap prepaid sim card for testing purposes. The stock firmware should fix anything in the modem or system that could have been corrupted... So flash that and have a cheap at&t Sim handy for testing.
Just use your father's sim card. Either it connects to the GSM network or it doesn't.
absinthesummer said:
Well you're baseband is good. Just get a little cheap prepaid sim card for testing purposes. The stock firmware should fix anything in the modem or system that could have been corrupted... So flash that and have a cheap at&t Sim handy for testing.
Click to expand...
Click to collapse
I attempted to flash the stock rom via odin v. 307 but I get a failed message. The phone shows I have a custom binary download (12 counts), official Samsung binar but, my system status is custom and my knox warranty is void: 1. Then there is a red message stating "unsupported version" at the bottom. The date for the stock rom was Jan 2013 AT&T, US on the sammobile site. I can no longer boot into the phone's OS, I am stuck in download mode until I manually restart and then it displays a message that I need to connect to Kies recovery. Thank you for the help so far, Any chance I can salvage this phone still? I did try going into Kies, but it cannot connect with my phone for some reason?
1425
rangercaptain said:
Just use your father's sim card. Either it connects to the GSM network or it doesn't.
Click to expand...
Click to collapse
Unfortunately, I got the phone when I was visiting home, I currently live a few states away from him. It would definitely make things much simpler if I didn't right now though.
GreatGrizzwald said:
I attempted to flash the stock rom via odin v. 307 but I get a failed message. The phone shows I have a custom binary download (12 counts), official Samsung binar but, my system status is custom and my knox warranty is void: 1. Then there is a red message stating "unsupported version" at the bottom. The date for the stock rom was Jan 2013 AT&T, US on the sammobile site. I can no longer boot into the phone's OS, I am stuck in download mode until I manually restart and then it displays a message that I need to connect to Kies recovery. Thank you for the help so far, Any chance I can salvage this phone still? I did try going into Kies, but it cannot connect with my phone for some reason?
Click to expand...
Click to collapse
It sounds like the phone was updated previously to either 4.3 or 4.4.2, which have Knox and that pesky counter. Technically you can't directly downgrade, so be sure you're downloading firmware that is 4.3 or higher. I didn't realize sammobile only went to MA4 for US AT&T. (In a pinch you can use Canadian firmware, but we have other links for stock firmware). Also, don't worry too much about Kies. It can be helpful, but honestly I could never get my note 2 recognized by kies either.
When I get back from taking my kids to school, I'll gather some links that will help you revive this phone Links below:
@GreatGrizzwald:
More recent links to stock firmware: STOCK PACKAGES TO MK6 This is LJ2 (4.1.2), MK6 (4.3) and up. He's got all the stock firmwares, available for flashing either in recovery on via odin. I've highlighted the one I would use in the attached screenshot (MK6- ODIN)
He also has a thread for NE5 (The latest firmware, 4.4.2) HERE
So if MK6 doesn't work, try NE5. One of those two has to work. You're dad already updated to either 4.3 or 4.4.2, I don't know which so start with 4.3 (MK6) and if it doesn't work try 4.4.2 (NE5)
On those two threads, he has a TON of links that will be helpful to you in getting back to stock also.
And here's a reference page with some useful links: One Stop Shop
This one is dedicated to downgrading back to LJ2 (4.1.2) from 4.3+, it MIGHT come in handy for you: Downgrade Instructions
If you have trouble with the stock firmware, you can also try Chainfire's CF Auto Root. It's stock firmware but it's rooted. Try the other firmwares by Zen Arcade first though CF AUTO ROOT
We'll get it going for you The stock firmware will re-flash the modem and all the configuration files so you're data should work again. Then you can do whatever you want, root, recovery, flash other stuff, or leave it stock. You got this
---------- Post added at 07:51 AM ---------- Previous post was at 07:09 AM ----------
GreatGrizzwald said:
Unfortunately, I got the phone when I was visiting home, I currently live a few states away from him. It would definitely make things much simpler if I didn't right now though.
Click to expand...
Click to collapse
Also you have to figure out if it's software or hardware. I'm inclined to believe it's software so I think if you get it back to stock you'll be good. If it was hardware, it wouldn't even recognize a sim being inserted (recently repaired an htc one mini with this problem, it needed a new Sim tray, thankfully it was only $20).
But it sounds more like a bad flash corrupted some of those important files and configurations controlling data connections, it's all good, if it's software it can definitely be fixed. If it were hardware it could still be fixed it would just be a bit more time consuming.
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
absinthesummer said:
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
Click to expand...
Click to collapse
Thank you for all this, I will start working with it today. You have been a huge help.
GreatGrizzwald said:
Thank you for all this, I will start working with it today. You have been a huge help.
Click to expand...
Click to collapse
No problem, I know how much of a pain it can be when things just don't seem to be working. But you have all the resources you need now and I'm gonna talk to my friend who runs the one-stop shop page to see if he will update it and add some of these resources to make it easier for you, and others with similar problems, to find what they need. Good luck!
1100
absinthesummer said:
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
Click to expand...
Click to collapse
Hey, I was able to flash the stock rom you recommended, everything is working fine. Took the phone to AT&T and got a new sim card, everything seems to be working perfectly. Thank you again for all your assistance. could not have done this without your help.
GreatGrizzwald said:
Hey, I was able to flash the stock rom you recommended, everything is working fine. Took the phone to AT&T and got a new sim card, everything seems to be working perfectly. Thank you again for all your assistance. could not have done this without your help.
Click to expand...
Click to collapse
That is great news! I'm so glad it's working for you. Enjoy your (new-to-you) note 2 and keep those files on hand in case you need them in the future!
absinthesummer said:
No problem, I know how much of a pain it can be when things just don't seem to be working. But you have all the resources you need now and I'm gonna talk to my friend who runs the one-stop shop page to see if he will update it and add some of these resources to make it easier for you, and others with similar problems, to find what they need. Good luck!
Click to expand...
Click to collapse
If I can ask one more question, the phone keeps trying to download and install a software update however, it is unable to complete the update. Could this be because my counter was tripped? or could I be missing something that I should have flashed along with the stock firmware?
GreatGrizzwald said:
If I can ask one more question, the phone keeps trying to download and install a software update however, it is unable to complete the update. Could this be because my counter was tripped? or could I be missing something that I should have flashed along with the stock firmware?
Click to expand...
Click to collapse
There are a few reasons it won't flash. If it still says custom in download mode, for instance, from when your dad tried to root it. You can check in your about phone section to see if it says modified or official. It should say official there but when you're in download mode it will tell you your status:custom.
Something like
Model : SGH-i317
Binary count:
Firmware: Samsung official
Status: Custom (it should say official to receive OTA)
Knox warranty bit: 0x1 (from where your dad tried to root)
^Either of those last two can prevent an OTA from completing. The update checks for certain things and then continues or rejects based on those checks.
Also (and this shouldn't apply to you) if you have a custom recovery installed or you've rooted and removed pre-installed apps, it won't flash. Check those things and your OTA should work. If it still doesn't, you can download the ne5 firmware I linked you to before. That's official 4.4.2 firmware and it will update you to the latest via Odin if you can't take the OTA for whatever reason.
The firmware you flashed should have taken everything back to stock for you, but it wouldn't really reset the Knox counter & custom status... and that very well could would an OTA. It seems it does anyway, so just update yourself with Odin.
Lastly, if you really want to reset completely, and be able to OTA, you can do that downgrade method I linked before to completely reset your phone and allow you receive OTAs again. (It would take you ALL the way back to 4.1.2 and you would OTA back to 4.3-4.4.2. Personally, I wouldn't do all that unless I planned to sell it, because the firmwares that are released for OTAs are usually available on here to flash with Odin within a day of release, so you'll always be able to have the latest firmware regardless.
Hope that helps you didn't miss anything, it's just the nature of the OTA.
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Edited to add, you can also go about it another way: root it and use triangle away to reset your custom status & flash counter and then reflash the same firmware you did yesterday. Then you should be able to OTA. (Although I'm not 100% on whether or not the Knox counter will interfere with the OTA update, I think it's just the flash counter that trips it).
And if you want the OTA notice to stop completely, you can root it and turn off the notifications entirely. I wasn't sure on whether you wanted to take the update or not... if you do, I'd just update with the latest via Odin. It's the simplest way to update and you wouldn't have any issues or surprises that people tend to get with OTAs.
absinthesummer said:
There are a few reasons it won't flash. If it still says custom in download mode, for instance, from when your dad tried to root it. You can check in your about phone section to see if it says modified or official. It should say official there but when you're in download mode it will tell you your status:custom.
Something like
Model : SGH-i317
Binary count:
Firmware: Samsung official
Status: Custom (it should say official to receive OTA)
Knox warranty bit: 0x1 (from where your dad tried to root)
^Either of those last two can prevent an OTA from completing. The update checks for certain things and then continues or rejects based on those checks.
Also (and this shouldn't apply to you) if you have a custom recovery installed or you've rooted and removed pre-installed apps, it won't flash. Check those things and your OTA should work. If it still doesn't, you can download the ne5 firmware I linked you to before. That's official 4.4.2 firmware and it will update you to the latest via Odin if you can't take the OTA for whatever reason.
The firmware you flashed should have taken everything back to stock for you, but it wouldn't really reset the Knox counter & custom status... and that very well could would an OTA. It seems it does anyway, so just update yourself with Odin.
Lastly, if you really want to reset completely, and be able to OTA, you can do that downgrade method I linked before to completely reset your phone and allow you receive OTAs again. (It would take you ALL the way back to 4.1.2 and you would OTA back to 4.3-4.4.2. Personally, I wouldn't do all that unless I planned to sell it, because the firmwares that are released for OTAs are usually available on here to flash with Odin within a day of release, so you'll always be able to have the latest firmware regardless.
Hope that helps you didn't miss anything, it's just the nature of the OTA.
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Edited to add, you can also go about it another way: root it and use triangle away to reset your custom status & flash counter and then reflash the same firmware you did yesterday. Then you should be able to OTA. (Although I'm not 100% on whether or not the Knox counter will interfere with the OTA update, I think it's just the flash counter that trips it).
And if you want the OTA notice to stop completely, you can root it and turn off the notifications entirely. I wasn't sure on whether you wanted to take the update or not... if you do, I'd just update with the latest via Odin. It's the simplest way to update and you wouldn't have any issues or surprises that people tend to get with OTAs.
Click to expand...
Click to collapse
Awesome, that makes a lot more sense now. Thanks again.
Hey I forgot you don't have custom recovery. Anyway, I sent you PMs,and you can do a search of this very forum- use the search term "update" or "ota" and you will find a LOT of threads on boot failures after OTA. Most people got their phones back.
If you can't get into DL mode (Vol-, Home, Power), try getting into the stock recovery (Vol+, Home, Power) because you should/could be able to factory reset the device from there. Also hold the button combo longer than usual. If one recovery option (DL mode) isn't working, than theoretically the other should still be accessible, through which you can adb sideload to the device or try factory reset. I know it's frustrating, but you're not the first nor the last to have an OTA go wrong ;/ We'll get ya back up & running.
You're not the only one in trouble after that update: http://forum.xda-developers.com/galaxy-note-2-att/help/todays-update-soft-bricked-phone-t2939649
Hello Guys,
I am looking for Custom ROM for my Note 4 SM-N910P (Sprint) which can be flashed through ODIN. The ROM can be any, I just need it as a backup ROM because I currently got locked by Samsung and wasn't able to log back in. I had to downgrade my Stock ROM, so I could bypass the activation lock screen. And since the activation lock was enabled, I was not able to flash custom recovery.
So if anyone can please provide me a link where I can download a ROM which can easily be flashed through ODIN would be great.
Thanks,
Asim
Asim Waqar said:
Hello Guys,
I am looking for Custom ROM for my Note 4 SM-N910P (Sprint) which can be flashed through ODIN. The ROM can be any, I just need it as a backup ROM because I currently got locked by Samsung and wasn't able to log back in. I had to downgrade my Stock ROM, so I could bypass the activation lock screen. And since the activation lock was enabled, I was not able to flash custom recovery.
So if anyone can please provide me a link where I can download a ROM which can easily be flashed through ODIN would be great.
Thanks,
Asim
Click to expand...
Click to collapse
Did you try to Odin the very same update you had before when reactivation lock was enabled?
I read that some time ago that may get you back into Google and Samsung. If that flashes, you should be able to sign into Google and Samsung with same user and password that was used to enable reactivation lock. Cannot use a different user or password. Google will challenge you to use the same user and password and will not allow another user to setup as new device.
Be aware that trying to downgrade bootloader will only make this much worse. Bootloader downgrade shouldn't be attempted but Android 5.1 and Marshmallow bootloader are basically same security and can be Odin flashed.
But you need the same stock tar that was on the phone when reactivation lock was enabled and same user and password.
Sent from my SM-N920P using Tapatalk
Asim Waqar said:
Hello Guys,
I am looking for Custom ROM for my Note 4 SM-N910P (Sprint) which can be flashed through ODIN. The ROM can be any, I just need it as a backup ROM because I currently got locked by Samsung and wasn't able to log back in. I had to downgrade my Stock ROM, so I could bypass the activation lock screen. And since the activation lock was enabled, I was not able to flash custom recovery.
So if anyone can please provide me a link where I can download a ROM which can easily be flashed through ODIN would be great.
Thanks,
Asim
Click to expand...
Click to collapse
There are no custom roms that install with odin. Only stock. But besides that, to address your problem, I'm almost positive you can bypass activation lock. Google it. It's a little process but it's possible.
Here's one of many links i found
https://youtu.be/4qE9gRhkqPA
Well when i downgraded the ROM from Marshmallow to Lollipop, I still got the same screen to login to Samsung account to continue, However, luckily this time Samsung did let me login with my user ID and password, whereas, in Marshmallow it wasn't let me login even though my user name and password was correct. it kept showing "processing failed" .. Anyways, I did manage to remove the activation lock. and now using the stock Marshmallow ROM..
I really wished that there was a way of installing Custom ROM through ODIN. That would have been great!
Asim Waqar said:
Well when i downgraded the ROM from Marshmallow to Lollipop, I still got the same screen to login to Samsung account to continue, However, luckily this time Samsung did let me login with my user ID and password, whereas, in Marshmallow it wasn't let me login even though my user name and password was correct. it kept showing "processing failed" .. Anyways, I did manage to remove the activation lock. and now using the stock Marshmallow ROM..
I really wished that there was a way of installing Custom ROM through ODIN. That would have been great!
Click to expand...
Click to collapse
Odin is really only meant for stock samsung software/firmware, as it's leaked software from samsung. All custom roms are installed through custom recovery(ex. TWRP, CWM), at least on this device. Other devices install Roms through ADB commands.
Hello.
I've just discovered that I can't switch my phone on because it says "custom recovery block by frp lock". I know there are numerous threads on this forum and other websites describing this problem and ways to solve it, included mantaining data.
Every method requires the download of the same version firmware you had installed on your phone. The problem is that I cannot really remember if I kept my Galaxy A3 2016 to 5.1 or I upgraded it to 6.0. Obviously I cannot check it by phone since I cannot even boot, nor via adb since it isn't able to recognise the phone in the download mode.
So firstly: is there a way to retrieve the firware code, or at least, the android version of my phone? Can adb recognise the phone in downlaod mode?
Secondly. According to this link in xda, that user was able to solve the problem using some kind of firmware image (QB1), which seems to be an upgrade. Is that method valid for other samsung phones? For my A3, should I follow the same steps with the correct firmware version?
Thanks in advance
Frank-95 said:
Hello.
I've just discovered that I can't switch my phone on because it says "custom recovery block by frp lock". I know there are numerous threads on this forum and other websites describing this problem and ways to solve it, included mantaining data.
Every method requires the download of the same version firmware you had installed on your phone. The problem is that I cannot really remember if I kept my Galaxy A3 2016 to 5.1 or I upgraded it to 6.0. Obviously I cannot check it by phone since I cannot even boot, nor via adb since it isn't able to recognise the phone in the download mode.
So firstly: is there a way to retrieve the firware code, or at least, the android version of my phone? Can adb recognise the phone in downlaod mode?
Secondly. According to this link in xda, that user was able to solve the problem using some kind of firmware image (QB1), which seems to be an upgrade. Is that method valid for other samsung phones? For my A3, should I follow the same steps with the correct firmware version?
Thanks in advance
Click to expand...
Click to collapse
1.install KIES
2.press tools
3.press frimware upgrade and installation
4.device id is your device model and serial number can be found under battery
5. allow kies to download and install the image
Video link for more help : https://www.youtube.com/watch?v=LqoX7wNhotk
good luck
Edit: please remember to enable OEM unlock in developer options next time
Kies cannot link to the device in the downlaod mode unfortunetely
Frank-95 said:
Kies cannot link to the device in the downlaod mode unfortunetely
Click to expand...
Click to collapse
try using smartswitch and see if it detects it
-are drivers installed
-does the pc recognize the phone ?
So, I had already tried with Smartswitch, but it says device not supported and does not link at all.
Moreover yes, the computer could read the phone before the frp lock, and even now, odin can detect it in download mode.
Kies just loads for some minutes and then says "unable to link to the device"
EDIT: no sorry kies raises "the device does not respond"
ok we need to flash using odin , i assume you can't access recovery but if you tried and it worked, look at the top of the screen it must show a code like
<your A3 model> followed by <your country> followed by <frimware date>
If you couldnt, we can use an updated version for your model , please provide us with the model if u can.
I can only acces to odin mode. Via that, I have the following text:
Product name is: SM-A310F
Current binary: Custom (it was rooted)
System status: Custom
FRP LOCK: ON
Secure Download: Enabled
Knox Warranty Void: 1
RP SWREV: B:2 K:0 S:0
I am sure that the phone had Vodafone pre-installed applications, and looking at mrcrab.net there exist these possible stock firmware:
Android 5
Android 5
Android 6
Android 6
I only fear that if I mistaken the version I will obtain a wipe of my data, which are not vital but are important to me
Actually there is no way to avoid the reset as we don't know anything about the PDA version, install the drivers type in google "USB Samsung drivers"
It must show developer.Samsung.com/....
I'm on phone so I can't provide it as a link, install the drivers and try again, else we will get the latest version
I already have samsung usb drivers, and odin can succesfully detect the phone in download mode; Kies cannot, though
Anyway, if you open one of the links I posted, isn't the PDA shown in the line:
OS Version : A310FXXU1AOLE (chosen one as example)
In that website there is every stock firmware by model, android version, and mobile operator. I know two out of three, and those 4 links are the 4 possible choices regarding android version. If I picked the right one, would I avoid the data reset, wouldn't I?
EDIT: What, if I did how it is explained here with the latest version? I mean download android 6 last upgrade, extract it, rename .tar.md5 in .tar and flah it with odin? Would it be any risk of loosing data?
Hello,
.MD5 lets odin checksum the rom loaded to it to make sure it's not corrupted, however if you are sure of two main things:
that the frimware you are flashing isn't a downgrade as downgrading flashs a old bootloader which gets you in some kind of troubles possibly a brick, to avoid that, grab the latest version
and the second thing you must make sure of is that the file isn't anyway corrupted.
if you think it's all ok, then you can proceed as of i tried it once and it saved a device.
Okay, I'm sure now that my android version was 6.0.1 because I read that 5.1 didn't have single app permissions manager, and I definetely remember that I had it.
According to this page, I have three possible choices.
1) I think the right version is the oldest one. In case I mistaked, would I risk a brick even if the major version is the same?
2) Also, if I mistaked, do I risk a data loss even though the major version is the same?
Thank you (we're almost there)
Frank-95 said:
Okay, I'm sure now that my android version was 6.0.1 because I read that 5.1 didn't have single app permissions manager, and I definetely remember that I had it.
According to this page, I have three possible choices.
1) I think the right version is the oldest one. In case I mistaked, would I risk a brick even if the major version is the same?
2) Also, if I mistaked, do I risk a data loss even though the major version is the same?
Thank you (we're almost there)
Click to expand...
Click to collapse
The build number must be the same regarding the android version, so to keep the files it must be the same as the one in the phone, else a wipe will be performed.
The problem is that you want your data, that maybe lost if we don't have the exact same build.
Just grab the latest marshmallow or nougat -, but the data would be lost then.
Do a hard reset in case something went wrong.
I was able to unlock the phone a mantain the data! Thanks
I have a special problem with an old Samsung Galaxy A3 2016 SM-A310F (Android 7.0 Nougat)
on which the correct combined file cannot be obtained
I have tried perhaps all FRP removal options without success
A310FXXS5CSH3