Related
Hello, after i got my op3 i instant decrypted it with fastboot and installed freedomos because i heard there could be problems with rooting etc.
But now i heard, that you can use Customroms and twrp even with encrypted storage, what i find really nice so thiefes can't access my data easily.
Now the question is, can i simply encrypt my device in settings -> security with a password and can i simply enter the password in twrp then, and is the behavior the same as the forced encryption on stock oxy?
Also i have another problem, i cant use cm13, cm14 and resurrectionremix, because it stucks on the op logo on boot. I read that this because the data is decrypted. Will encryption fix this problem or do i have to do the method2 of the unbrick guide to fix it? Well, i can just use my nandroid restored freedomOS rom at the moment, any other roms results in a bootfreeze, even if i update freedomos.
Best regards and thanks for your help guys :fingers-crossed:
New to the Moto Z2 play, moved to this from a Z2 force on Verizon after the shattershield started peeling. Anyway, there seems to be a lot of conflicting information here, and i'm struggling to actually nail down the process for root. My bootloader is already unlocked, however between several different versions of TWRP, Retus based phones vs Albus, ability to unroot and update if the system is modified, rooting with or without disabling encryption, countless different variants with different procedures, etc. i'm a little overwhelmed. Can anyone point me in the right direction of rooting my device (hopefully) WITHOUT losing all my data?
StATicxTW0T said:
New to the Moto Z2 play, moved to this from a Z2 force on Verizon after the shattershield started peeling. Anyway, there seems to be a lot of conflicting information here, and i'm struggling to actually nail down the process for root. My bootloader is already unlocked, however between several different versions of TWRP, Retus based phones vs Albus, ability to unroot and update if the system is modified, rooting with or without disabling encryption, countless different variants with different procedures, etc. i'm a little overwhelmed. Can anyone point me in the right direction of rooting my device (hopefully) WITHOUT losing all my data?
Click to expand...
Click to collapse
I'm about to buy the unlocked Moto Z2 Play from the Moto site (64GB variant... not sure of the model number) but have you checked out these threads?...
https://forum.xda-developers.com/showpost.php?p=75098899&postcount=40
https://forum.xda-developers.com/z2-play/how-to/guide-resource-help-thread-t3627615/page3
allstar21369 said:
I'm about to buy the unlocked Moto Z2 Play from the Moto site (64GB variant... not sure of the model number) but have you checked out these threads?...
https://forum.xda-developers.com/showpost.php?p=75098899&postcount=40
https://forum.xda-developers.com/z2-play/how-to/guide-resource-help-thread-t3627615/page3
Click to expand...
Click to collapse
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
I have a rooted XT1710-01, also. If you are going to install Xposed and Gravity Box, I recommend not updating Magisk, above v14. After v15 and now v16, I have had issues with Automate It app and Tasker rules not working, until I uninstalled Xposed.
Downgrading Magisk versions requires flashing your stock ROM and basically starting over.
Motorola has not posted firmware for this model.
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
So glad to see someone have it working and with a clear guide. I'm going to buy the phone this week.
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
I just wanted to let everyone know that the guide posted in that post worked for me perfectly. I had an XT1710-01 that I had unlocked the bootloader before but stopped there. Then I finally wanted to root it, and ran into everything the OP ran into - just so many different guides and versions of TWRP/Magisk not working with the Z2 Play, it was hard to nail down the exact versions of everything I needed and make sure I didn't flash an incompatible version or something. I found that same guide a few days ago as well but never did it until today, and can confirm it works. I already had my bootloader unlocked and just did the rooting portion and all my data was saved (but I wasn't too worried about my data honestly, it's all backed up anyway).
And a special thanks to OP for coming back and posting his solution. Nothing is more frustrating than searching for a problem online, finding a hit on your exact problem in a thread that was posted years ago, and then no solution is ever posted in that thread. So good job. :good:
Johmama said:
I just wanted to let everyone know that the guide posted in that post worked for me perfectly. I had an XT1710-01 that I had unlocked the bootloader before but stopped there. Then I finally wanted to root it, and ran into everything the OP ran into - just so many different guides and versions of TWRP/Magisk not working with the Z2 Play, it was hard to nail down the exact versions of everything I needed and make sure I didn't flash an incompatible version or something. I found that same guide a few days ago as well but never did it until today, and can confirm it works. I already had my bootloader unlocked and just did the rooting portion and all my data was saved (but I wasn't too worried about my data honestly, it's all backed up anyway).
And a special thanks to OP for coming back and posting his solution. Nothing is more frustrating than searching for a problem online, finding a hit on your exact problem in a thread that was posted years ago, and then no solution is ever posted in that thread. So good job. :good:
Click to expand...
Click to collapse
I just received my Z2 Play, unlocked the bootloader, and am about to flash the custom TWRP (albus_twrp.img) posted in the guide linked above... but the guide never says to "flash" TWRP, it just says to "boot" with TWRP and also "Enter your FBE password: it must work! (turn off screen and turn it back on if not responsive)"...
I'm not 100% sure what to do here. Should I boot TWRP first, do a full backup and then flash TWRP? I don't want to wipe it.
And what is this FBE (File-Based Encryption) password? I've never set one and don't want everything encrypted.
allstar21369 said:
I just received my Z2 Play, unlocked the bootloader, and am about to flash the custom TWRP (albus_twrp.img) posted in the guide linked above... but the guide never says to "flash" TWRP, it just says to "boot" with TWRP and also "Enter your FBE password: it must work! (turn off screen and turn it back on if not responsive)"...
I'm not 100% sure what to do here. Should I boot TWRP first, do a full backup and then flash TWRP? I don't want to wipe it.
And what is this FBE (File-Based Encryption) password? I've never set one and don't want everything encrypted.
Click to expand...
Click to collapse
I didn't flash TWRP on my phone. I think I tried it once and it failed for some reason, so I just followed the guide of booting into TWRP, backing up my phone, and pulling the backup. Should be okay for what I need, in case of a failure I will have a backup somewhere and can recover the device. But yes, I'd at least boot into TWRP, then backup your device like in that guide so you have a backup. Flashing it is up to you, I've always flashed a custom recovery but on this phone I'm keeping the original recovery so I can get an OTA. On my Nexus devices I don't care about OTA because I just flash ROMs all the time so it's no big deal.
The FBE password as far as I can tell is the 4 or 5 digit PIN number you are asked to input upon a fresh wipe of your device to set as a password. I have my phone set up to use my fingerprint to unlock the phone, and if that fails it will ask for my PIN, which is the same as the FBE of mine. I used that same number in TWRP when it asks for a password to unencrypt the data and it worked. As far as turning off encryption, I'm not sure if there's a way to do that. There could be, but to turn it off, it wipes your data as a security measure.
Johmama said:
so I just followed the guide of booting into TWRP, backing up my phone, and pulling the backup. Should be okay for what I need, in case of a failure I will have a backup somewhere and can recover the device. But yes, I'd at least boot into TWRP, then backup your device like in that guide so you have a backup.
Click to expand...
Click to collapse
Yeah, I can't backup my ROM most likely because I don't have an FBE password. When I go to backup my ROM in TWRP it fails.
Johmama said:
The FBE password as far as I can tell is the 4 or 5 digit PIN number you are asked to input upon a fresh wipe of your device to set as a password. I have my phone set up to use my fingerprint to unlock the phone, and if that fails it will ask for my PIN, which is the same as the FBE of mine. I used that same number in TWRP when it asks for a password to unencrypt the data and it worked.
Click to expand...
Click to collapse
I tried entering my unlock code and the pin I created but neither worked for my FBE password. I don't ever remember being asked to enter a password when setting up my device. I suppose this means I'll have to wipe data and then setup an FBE password.
allstar21369 said:
I tried entering my unlock code and the pin I created but neither worked for my FBE password. I don't ever remember being asked to enter a password when setting up my device. I suppose this means I'll have to wipe data and then setup an FBE password.
Click to expand...
Click to collapse
If it helps at all, the first time I tried it also didn't work for me and I did end up wiping my phone for other reasons before I came back and tried that guide again and it worked. I thought I set up the PIN they're talking about the first time around but I did have troubles in TWRP before the first wipe of my data. I would just boot up the phone regularly, plug it in to your computer, and try to grab any files you need and wipe it. I know that isn't the answer you're looking for, but it's all I can give I guess. Once you reset, hopefully they'll prompt you to make a PIN during the setup process and that should be the FBE password. Then follow the guide. I hope you get it man.
Oh, and to a note to you and everyone reading this, I booted to TWRP 3.2.1-0-albus and Magisk-v14.0. Dunno if it's just rumors or not but I heard the newer versions of Magisk might not work with the Z2 Play past version 14. Dunno if that's true but v14.0 worked for me.
Johmama said:
If it helps at all, the first time I tried it also didn't work for me and I did end up wiping my phone for other reasons before I came back and tried that guide again and it worked. I thought I set up the PIN they're talking about the first time around but I did have troubles in TWRP before the first wipe of my data. I would just boot up the phone regularly, plug it in to your computer, and try to grab any files you need and wipe it. I know that isn't the answer you're looking for, but it's all I can give I guess. Once you reset, hopefully they'll prompt you to make a PIN during the setup process and that should be the FBE password. Then follow the guide. I hope you get it man.
Oh, and to a note to you and everyone reading this, I booted to TWRP 3.2.1-0-albus and Magisk-v14.0. Dunno if it's just rumors or not but I heard the newer versions of Magisk might not work with the Z2 Play past version 14. Dunno if that's true but v14.0 worked for me.
Click to expand...
Click to collapse
Okay. I just wiped and re-set up everything and still no FBE password was asked for OR works when I go into TWRP. I'm using TWRP 3.1.1-0... I suppose I'll try it all again using TWRP 3.2.1-0-albus after deleting data.
*Edit: I did exactly what I just said I was doing booted TWRP 3.2.1-0-albus instead of 3.1.1-0 and when I it booted up and asked me for a decryption password I entered the pin I set up previously and it has been stuck at the "Mount, Trying Decryption" screen for a long time... but it's not frozen. It says "Updating partition details... ...done
Unable to mount storage
Full SELinux support is present.
Data successfully decrypted, new block device: '/dev
/block/dm-0'
Updating partition details...
...done"
And the progress bar/thing at the bottom is still animated like it's working... no forward or back buttons or anything and turning off/on the screen hasn't done anything... not really sure what to do here... I don't want to unplug it and brick my phone or force it off...
*Edit 2:
I now have it all sorted out.
TWRP never finished trying to decrypt data so I long pressed the power button and eventually went here -> https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531 , downloaded "twrp_albus_3.1.2_r18_64.img" and in adb used the command:
fastboot boot twrp_albus_3.1.2_r18_64.img
This TWRP looks a bit different than all of the others but it let me boot up and use my recently created PIN code to actually decrypt my data and make a full backup. After that I just installed Magisk (the latest one, 16.4) as indicated in this guide -> https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792 and everything is fine. I never even flashed TWRP, just booted it.
Just curious what you guys have done about getting OTA updates since you've rooted and installed Magisk.
Have @allstar21369 or @pizza_pablo had the chance to figure out the update process?
I'm currently trying to navigate the Magisk uninstall --> OTA update process and could use some insight if either of you guys have any to share.
joefuf said:
Just curious what you guys have done about getting OTA updates since you've rooted and installed Magisk.
Have @allstar21369 or @pizza_pablo had the chance to figure out the update process?
I'm currently trying to navigate the Magisk uninstall --> OTA update process and could use some insight if either of you guys have any to share.
Click to expand...
Click to collapse
I didn't want updates, especially the oreo "upgrade".
pizza_pablo said:
I didn't want updates, especially the oreo "upgrade".
Click to expand...
Click to collapse
Hmm, didn't even think about just sticking on what works... Did Oreo give people some issues?
Since this was Day 1 with the new phone, I was just trying to get up to speed and probably sit on one version until I had compatibility issues with something, but everything just works.
joefuf said:
Hmm, didn't even think about just sticking on what works... Did Oreo give people some issues?
Since this was Day 1 with the new phone, I was just trying to get up to speed and probably sit on one version until I had compatibility issues with something, but everything just works.
Click to expand...
Click to collapse
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Double - double \_0_/
pizza_pablo said:
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Click to expand...
Click to collapse
I feel exactly the same way. No benefits for me. I don't want the bright white interface and I would never use the "Picture in Picture" (or floating video) feature (and if I did want that there are a couple apps for Nougat that do it).
But If I do decide I want it and give upgrading a shot I'll definitely post it here.
pizza_pablo said:
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Click to expand...
Click to collapse
Yeah, very understandable. It really is superfluous to the general experience.
allstar21369 said:
I feel exactly the same way. No benefits for me. I don't want the bright white interface and I would never use the "Picture in Picture" (or floating video) feature (and if I did want that there are a couple apps for Nougat that do it).
But If I do decide I want it and give upgrading a shot I'll definitely post it here.
Click to expand...
Click to collapse
Thank you sir! Keep me posted. I'm posting everywhere right now to learn the new methods so I know if there ever comes a time. This is my first phone since my Motorola Droid 4. Back then it was one click root, install and run Safestrap apk to get custom recovery, boot into custom recovery and flash zips to your heart's content. I'm sure this will be as "simple" once I learn, but it's pretty daunting in prospect.
I wanted to flash Lineage OS on my device, but I want to make sure not to brick it and make sure I can Stil use it, so I have some questions. Please answer if you have experience.
1. Should I use heimdall or Odin for flashing twrp?
2. Do I have to flash a non-dm-verity zip file, or is wiping it enough?
3. Are the current Lineage OS 16 nightlies stable enough to use them as a daily driver?
4. Does it pass SafetyNet?
Thanks in advance
You should definetly use odin, its made for samsung phones. There are many guides on the internet (and XDA) that show you how to install TWRP correctly.
If you want to install LineageOS anyway, you dont need to care about DM-verity. Just wipe system and cache partition and format the data partition.
Also, the LineageOS nightlies are definetly stable enough for daily usage, but you can also use crDroid or pixelExperience, they are also useful as daily driver.
For passing safetynet, you currently need to install magisk and install the "Magisk hide props config" or "SafetyPatch" module to pass safetynet.
Simon1511 said:
You should definetly use odin, its made for samsung phones. There are many guides on the internet (and XDA) that show you how to install TWRP correctly.
If you want to install LineageOS anyway, you dont need to care about DM-verity. Just wipe system and cache partition and format the data partition.
Also, the LineageOS nightlies are definetly stable enough for daily usage, but you can also use crDroid or pixelExperience, they are also useful as daily driver.
For passing safetynet, you currently need to install magisk and install the "Magisk hide props config" or "SafetyPatch" module to pass safetynet.
Click to expand...
Click to collapse
OK so I got everything to work perfectly except VoIP calls, which are apperently really hard to fix on Samsung devices. Thanks for the Quick reply!
Binary blocked by frp lock galaxy a5
Hi, I hope someone can help me, my buddy was flashing an s8 and didn't realize that another phone, an a5, was also plugged into the computer, so now we get this red message about binary blocked, we've tried Odin, TWRP, nothing will even recognize that the phone is connected, also the update from SD card and update from ADB are both blocked, there doesn't seem to be any way to get into the phone to flash it, can someone give me any idea how to save this phone? Please? I'm kind of a novice, I have a rough idea what I'm doing, learning as I go, I hope I can save this phone, thanks in advance
A4effort? said:
Hi, I hope someone can help me, my buddy was flashing an s8 and didn't realize that another phone, an a5, was also plugged into the computer, so now we get this red message about binary blocked, we've tried Odin, TWRP, nothing will even recognize that the phone is connected, also the update from SD card and update from ADB are both blocked, there doesn't seem to be any way to get into the phone to flash it, can someone give me any idea how to save this phone? Please? I'm kind of a novice, I have a rough idea what I'm doing, learning as I go, I hope I can save this phone, thanks in advance
Click to expand...
Click to collapse
Can you get into Recovery or Download mode?
Sorry for the late answer
Hi,
Some weeks ago I've got a LG V20 and followed some tutorials I found (without reading enough) to install LOS 17.1 with Twrp, Magisk and Viper4Android.
Then I was so dumb to enable LOS' encryption...now the problems start: I cannot install OTA Updates anymore. Twrp says "Decryption failed, cannot mount".
So...in short...how do I get updates now?
Some hours ago I installed LOS' recovery - but it also seems to be not working as expected: when I select " install update" in Lineage, it reboots into recovery - and thats it. No update is installed automatically as Twrp did normally. Can I use this with my already installed Magisk etc and encryption turned on at all? Or do I def need to use Twrp?
It would be very cool if someone here could help to get the decryption in Twrp work...that would be the best way for all and future users in my opinion.
However, I am stuck now with an encrypted phone, installed Magisk - and do not really know how to get an update of LOS the best way.
Many thanks already for every help
Ms0206 said:
Hi,
Some weeks ago I've got a LG V20 and followed some tutorials I found (without reading enough) to install LOS 17.1 with Twrp, Magisk and Viper4Android.
Then I was so dumb to enable LOS' encryption...now the problems start: I cannot install OTA Updates anymore. Twrp says "Decryption failed, cannot mount".
So...in short...how do I get updates now?
Some hours ago I installed LOS' recovery - but it also seems to be not working as expected: when I select " install update" in Lineage, it reboots into recovery - and thats it. No update is installed automatically as Twrp did normally. Can I use this with my already installed Magisk etc and encryption turned on at all? Or do I def need to use Twrp?
It would be very cool if someone here could help to get the decryption in Twrp work...that would be the best way for all and future users in my opinion.
However, I am stuck now with an encrypted phone, installed Magisk - and do not really know how to get an update of LOS the best way.
Many thanks already for every help
Click to expand...
Click to collapse
There are many v20 variants. Are you sure, you selected the correct version? In your case i would start with a clean installation following the official lineageOS guide.
kurtn said:
There are many v20 variants. Are you sure, you selected the correct version? In your case i would start with a clean installation following the official lineageOS guide.
Click to expand...
Click to collapse
Yes, I am sure...its a Vs995.
The way youre asking is interesting and I wonder a bit why...it implicates to me that either Twrp should work with encrypted LOS 17.1 - or Lineage its recoverymode with Magisk, Viper / my installed stuff.
I'll now take a look into the official LOS guide...
Edit: i don't get it. I assume sideload through Twrp does not work (encryption !). Recoverymode of LOS does not even ask for the password so I assume it also does not work with encryption turned on. Or does it? If so, how??
Is there any readme/wiki for the LOS-recoverymode?
Again, my device is encrypted. Magisk and other things are installed.
So how to update without any available recoverymode that is able to decrypt?
Ms0206 said:
Yes, I am sure...its a Vs995.
The way youre asking is interesting and I wonder a bit why...it implicates to me that either Twrp should work with encrypted LOS 17.1 - or Lineage its recoverymode with Magisk, Viper / my installed stuff.
I'll now take a look into the official LOS guide...
Edit: i don't get it. I assume sideload through Twrp does not work (encryption !). Recoverymode of LOS does not even ask for the password so I assume it also does not work with encryption turned on. Or does it? If so, how??
Is there any readme/wiki for the LOS-recoverymode?
Again, my device is encrypted. Magisk and other things are installed.
So how to update without any available recoverymode that is able to decrypt?
Click to expand...
Click to collapse
Your data Partition is encrypted. Sideload does not touch data partition. Follow the guide
As if I didn't know it before, following the official guides producing the same errors as using Twrp.
I tried so many things...using official recovery does not install OTA automatically.
Sideload producing the same errors as using Twrp - "Magisk addond.d failed, cannot find Magisk binaries, reflash OTA Form decrypted recovery or reflash Magisk".
Hi,
I flashed TWRP on my unlocked Redmi Note 8T with MIUI Global 12.5.5. Everything was great until I rebooted it and saw Bluetooth error which pops every time I try to turn Bluetooth on or just randomly during usage of the device. I also tried to re-flas TWRP with Orange fox but it unfortunatelly did not help. Now I have no idea what to do but there are also some other people with this problem (for example:
https://www.reddit.com/r/Xiaomi/comments/y9zsak
).
Does anybody know any solution? Thanks!
Btw Orange fox is for ginko devices, I did not find version for willow
I had the exact same problem when I tried to root my stock rom in ginkgo. I was getting a lot of "app keeps stopping" pop ups, and that also included bt. My bt was completely broken until I changed rom. Also I'm guessing this had happened when I had rooted my phone with magisk, not by flashing recovery itself. Perhaps you could try to uninstall magsik, and see it it resolves the issue for you. If that would be the case, then you would have found your problem, and maybe you can flash a custom rom to safely root your phone.
Thanks for reply, but i did not have magisk flashed on my phone. I only had installed the app, prepared apk file and did nothing in TWRP (Orange fox) , just flashed a recovery with my PC, checked that it is working and rebooted device. Anyway I tried to do it only because of acces to NFC and Gpay which is now blocked.
As you also said, I would like to try custom rom (like LineageOS) because it seems like bad idea to have a stock room on an unlocked phone. Only the problem is how to backup data like data from apps, games etc.
So now it tried one of my ideas, which was to install Magisk (root) and uninstall it but it also did not help (I expected that)
vasik006 said:
Thanks for reply, but i did not have magisk flashed on my phone. I only had installed the app, prepared apk file and did nothing in TWRP (Orange fox) , just flashed a recovery with my PC, checked that it is working and rebooted device. Anyway I tried to do it only because of acces to NFC and Gpay which is now blocked.
As you also said, I would like to try custom rom (like LineageOS) because it seems like bad idea to have a stock room on an unlocked phone. Only the problem is how to backup data like data from apps, games etc.
Click to expand...
Click to collapse
To backup data simply copy your personal files in pc or sdcard. And to backup data in apps, take back-up of only those apps and where you need to backup. Don't take a complete backup using some app. That consumes a lot of space and make the newly rom feel "not so new". Most apps don't require you to take back-up offline these days. I usually backup only my personal files before flashing rom.
Yeah, that's true. But don't you know how to backup data from these "offline" apps? I was trying to solve this also before unpocking bootloader like a year ago but unsuccessfuly.
Also, which rom should I choose? I'm deciding between LineageOS and Pixel experience.
So I have LOS installed but I can´t install other zip files (like Google apps). Im only getting error: signature verification failed while. Im using LOS recovery so where is the problem?
Solved it!
Hey @vasik006 ! I know this is very late and you might have found the solution yourself, but I found the solution to this problem. Since yesterday I was trying to root my ginkgo with twrp, using magisk delta and had exact same issue. Joyose and bluetooth keeps stopping, and don't work. Simply factory reset ( I also formatted data) in twrp, and in next boot bluetooth should work. Then you can simply install the magisk apk and let it do its thing. No need to flash again since it has already made changes to boot file that can't be overriden by resetting phone.
Thanks, this might help someone else with this problem. I have already formatted my phone, installed Lineage OS and everything is ok
For me, the problem with BT and Joyose occurs only with TWRP v3.7.x. I went back to TWRP v3.6.1_9-0 but now backups are not working.
Jatin Verma x821 said:
Hey @vasik006 ! I know this is very late and you might have found the solution yourself, but I found the solution to this problem. Since yesterday I was trying to root my ginkgo with twrp, using magisk delta and had exact same issue. Joyose and bluetooth keeps stopping, and don't work. Simply factory reset ( I also formatted data) in twrp, and in next boot bluetooth should work. Then you can simply install the magisk apk and let it do its thing. No need to flash again since it has already made changes to boot file that can't be overriden by resetting phone.
Click to expand...
Click to collapse
I have the same problem with the Redmi note 8. Did you unroot first or did the factory reset directly? Tks
ennev said:
I have the same problem with the Redmi note 8. Did you unroot first or did the factory reset directly?
Click to expand...
Click to collapse
no need to unroot. simple factory reset the device and you're done.
Jatin Verma x821 said:
To backup data simply copy your personal files in pc or sdcard. And to backup data in apps, take back-up of only those apps and where you need to backup. Don't take a complete backup using some app. That consumes a lot of space and make the newly rom feel "not so new". Most apps don't require you to take back-up offline these days. I usually backup only my personal files before flashing rom.
Click to expand...
Click to collapse
TWRP is invaluable for backing up the system before making changes like theming etc. and I can take a TWRP backup to any of my (all the same) devices and restore the whole thing in just a few minutes. So convenient! I really couldn't imagine life without TWRP. TWRP enables me to clone my device in case of hardware failure. All my settings and all my apps and all my custom configurations which would otherwise take hours/days to setup - BAM! Presto! on the new device and running perfectly.
TWRP + NeoBackup are essential. TWRP as described, and NeoBackup to roll back breaking updates to apps when devs butcher them, break them, and/or just remove really useful features. I also disconnect apps that get ruined by an update from the Play Store so they don't keep coming up when I check for updates.
Alpha_Geek1 said:
TWRP is invaluable for backing up the system before making changes like theming etc. and I can take a TWRP backup to any of my (all the same) devices and restore the whole thing in just a few minutes. So convenient! I really couldn't imagine life without TWRP. TWRP enables me to clone my device in case of hardware failure. All my settings and all my apps and all my custom configurations which would otherwise take hours/days to setup - BAM! Presto! on the new device and running perfectly.
TWRP + NeoBackup are essential. TWRP as described, and NeoBackup to roll back breaking updates to apps when devs butcher them, break them, and/or just remove really useful features. I also disconnect apps that get ruined by an update from the Play Store so they don't keep coming up when I check for updates.
Click to expand...
Click to collapse
I would advise you to read the posts again. They were asking about how to take backup of "personal apps" which twrp can't do, and if they are changing ROM then twrp backup won't be of any use to them. Therefore, whatever you're trying to tell here doesn't really help the discussion.
Jatin Verma x821 said:
I would advise you to read the posts again. They were asking about how to take backup of "personal apps" which twrp can't do, and if they are changing ROM then twrp backup won't be of any use to them. Therefore, whatever you're trying to tell here doesn't really help the discussion.
Click to expand...
Click to collapse
TWRP does backup personal apps and their settings. Once you restore a TWRP backup, you have everything back except media files - images, videos, documents, etc. The launcher icons, the apps, the system settings - everything is a perfect clone which you can restore on a new device (same model, of course).
I actually came across this thread searching to see if others had a problem where merely flashing TWRP caused Bluetooth to crash (and Atmos).
Use OrangeFox
is there anyone use BT-fix-for-PE-20190618.zip to fix this problem ?
I'm on an ROG Phone II with the same issue.
The "fix" is to wipe in TWRP and install Magisk BEFORE you leave for your first boot and NEVER come back to TWRP as the issue will return the second recovery is booted.
s3rv said:
For me, the problem with BT and Joyose occurs only with TWRP v3.7.x. I went back to TWRP v3.6.1_9-0 but now backups are not working.
Click to expand...
Click to collapse
From what I can tell, this is correct. 3.6_XX-X allows me to come and go from TWRP as much as I please without incurring the bug, however, I haven't tested backup though I can't see a reason why they wouldn't work.
Are these existing backups that aren't working or the whole backup function in general?
starkshadow said:
is there anyone use BT-fix-for-PE-20190618.zip to fix this problem ?
Click to expand...
Click to collapse
It looks like this guy didn't have any luck with it either. It may be divice specific
Dredead said:
I'm on an ROG Phone II with the same issue.
The "fix" is to wipe in TWRP and install Magisk BEFORE you leave for your first boot and NEVER come back to TWRP as the issue will return the second recovery is booted.
From what I can tell, this is correct. 3.6_XX-X allows me to come and go from TWRP as much as I please without incurring the bug, however, I haven't tested backup though I can't see a reason why they wouldn't work.
Are these existing backups that aren't working or the whole backup function in general?
It looks like this guy didn't have any luck with it either. It may be divice specific
Click to expand...
Click to collapse
amazing, I have do nothing, just reboot my device, and yesterday the bluetooth also has problem, but today I open bluetooth, it is no problem. I'm still confused about that.
starkshadow said:
amazing, I have do nothing, just reboot my device, and yesterday the bluetooth also has problem, but today I open bluetooth, it is no problem. I'm still confused about that.
Click to expand...
Click to collapse
It seems to be a twrp issue. What version do you have? And what version of magisk do you have?
I have recently flashed miui 12 (android 10) after bricking the phone using qtel. I noticed the Bluetooth problem last week and didn't find a fix. I have twrp 3.6.2 and magisk 25.1. I had twrp 3.7.1 but if failed to decrypt data using pattern so I rolled back to 3.6.2. And I thought that magisk had to do with the Bluetooth problem so I rolled back to 25.1 from 26.
I still can't use the Bluetooth, and I don't have time to reset the phone, I just finished restoring everything
I CAN CONFIRM
go back to the previous twrp 3.6.2 version + wipe factory reset or simply format data solve sucesfuly solve installation issue of Magisk 26.1 or Magisk Delta 25210
Olfason said:
I CAN CONFIRM
go back to the previous twrp 3.6.2 version + wipe factory reset or simply format data solve sucesfuly solve installation issue of Magisk 26.1 or Magisk Delta 25210
Click to expand...
Click to collapse
I can't afford resetting my phone right now , don't have enough time. I'll let it like that for some months.
Edit : I have miui 12.0.6 installed (android 10) and I'm not planning to upgrade since I have much better battery life (even better than every mod I tried). I wander if I flash miui rom from recovery can fix it?
Edit 2: flashing the rom from recovery didn't fix it