Please help me ... - Lenovo ZUK Z2 (Plus) Questions & Answers

Can i flash newer pie builds with 4.4 kernel ????

friend with that version of your baseband 1.9 can not not have to install in Qpst to zui 3.5 ai then one can go to those with kernel 4.4

Zukker Fs! said:
friend with that version of your baseband 1.9 can not not have to install in Qpst to zui 3.5 ai then one can go to those with kernel 4.4
Click to expand...
Click to collapse
I tried but stuck on bluescreen.

Haider** said:
I tried but stuck on bluescreen.
Click to expand...
Click to collapse
Did you do the Qpst zui 3.5 procedure on it? because with that baseband its 1.9 ai if you tried by twrp it will never work.

Zukker Fs! said:
Did you do the Qpst zui 3.5 procedure on it? because with that baseband its 1.9 ai if you tried by twrp it will never work.
Click to expand...
Click to collapse
Deleted.

Zukker Fs! said:
Did you do the Qpst zui 3.5 procedure on it? because with that baseband its 1.9 ai if you tried by twrp it will never work.
Click to expand...
Click to collapse
How to do QPST procedure ???

Haider** said:
How to do QPST procedure ???
Click to expand...
Click to collapse
Link
https://forum.xda-developers.com/le...d-rom-v6-0-t3833954/post78067934#post78067934

Zukker Fs! said:
Link
https://forum.xda-developers.com/le...d-rom-v6-0-t3833954/post78067934#post78067934
Click to expand...
Click to collapse
I am from India is Zui 3.5 is good for me or I flash Zui 2.5 with QFil ????

Haider** said:
I am from India is Zui 3.5 is good for me or I flash Zui 2.5 with QFil ????
Click to expand...
Click to collapse
You can install through Qfil to zui 2.5 Indian and then unlock the bootloader, install recovery twrp and go to the roms with kernel 4.4. Already in the case of Zui 3.5 if you want to try try there by Qpst

Zukker Fs! said:
You can install through Qfil to zui 2.5 Indian and then unlock the bootloader, install recovery twrp and go to the roms with kernel 4.4. Already in the case of Zui 3.5 if you want to try try there by Qpst
Click to expand...
Click to collapse
Can you give me Zui 2.5 link.
Can I flash this ??
https://forum.xda-developers.com/le...n-firmware-t3693768/post74686090#post74686090

Haider** said:
Can you give me Zui 2.5 link.
Can I flash this ??
https://forum.xda-developers.com/le...n-firmware-t3693768/post74686090#post74686090
Click to expand...
Click to collapse
Yes you can ! But after that install it will have to unlock the bootloader and install the twrp as recovery. Why do not you try Qpst to zui 3.5? with it will not block your booloader just need to put the twrp back and go to the 4.4 kernel roms. Either option works I tested both

Haider** said:
Can you give me Zui 2.5 link.
Can I flash this ??
https://forum.xda-developers.com/le...n-firmware-t3693768/post74686090#post74686090
Click to expand...
Click to collapse
You can either install via Qpst to zui 2.5 Indian (after installed it you will need to unlock the bootloader and install the recovery twrp) or the Chinese zui 3.5 (do not need to unlock the bootloader, but the twrp yes)

Zukker Fs! said:
You can either install via Qpst to zui 2.5 Indian (after installed it you will need to unlock the bootloader and install the recovery twrp) or the Chinese zui 3.5 (do not need to unlock the bootloader, but the twrp yes)
Click to expand...
Click to collapse
Thanks bro .

Related

miui rom not booted

hey any one installed miui rom...i flashed but not booted ..suggestion plz
vardhan21 said:
miui rom...i flashed but not booted
Click to expand...
Click to collapse
You need to flash it when you are on stock ZUI which is based on Android 6.
sergsinger said:
You need to flash it when you are on stock ZUI which is based on Android 6.
Click to expand...
Click to collapse
thnks for rply..im on stock nougat ...
hey twrp flashable marshmallow rom link share to me plz
vardhan21 said:
twrp flashable marshmallow rom link share to me plz
Click to expand...
Click to collapse
1) https://zukfans.eu/community/threads/z2plus-2-3-042-multilanguage-v15-20161122.831/ - 2.3.042 China
2) https://mega.nz/#!gwl2HLRD!Ia3-wf_h21IIFcbHMJk2Sb9cPAjmWLYtE0vP6QgYTXA - 2.0.111 India
3) https://zukfans.eu/community/threads/z2plus-global-rom-v7-20161201.530/ - 2.0.133 India
I better recommend you to flash stock via QFIL, unlock bootloader, install TWRP and then MIUI.

GizRom 3.0 Multilanguage zui 3.1.112 Gapps Pico preinstaled.

GizROM 3.0 for ZUK Z2 based on ZUI 3.1.117 !
Changelog 3.0
* Based on ZUI 3.1.117 Chinese Nougat;
* improved translations;
* bug fixes and optimizations.
First installation
1 Copy the GizROM package to your phone;
2 enter recovery (choose power-on entry with the volume keys and select it with power);
3 clean the Data, Cache and Dalvik Cache partitions;
4. install ROM from TWRP;
5. restart the device.
Download - https://goo.gl/vt73Kw
Source
https://forum.gizchina.it/index.php?/topic/1291-gizrom-30-per-zuk-z2-zui-31117/
I'm not tested this.
Hdr+?
Stock rom have hdr+ so yes.
Don't need to wipe system? What if coming from different rom?
Clean all. What's different? This is custom stock rom bro. [emoji849]
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
AEX5 How power consumption?
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
gizrom 3.0 flashed. bootloader locked?
ERHAN53 said:
gizrom 3.0 flashed. bootloader locked?
Click to expand...
Click to collapse
No. I don't think it makes a difference but I didn't boot into the rom. Like I said, i was only interested in the baseband and restored aex immediately after flash.
It did not lock my bootloader.
Araa01 said:
Stock rom have hdr+ so yes.
Click to expand...
Click to collapse
Without api2 how hdr+ will work on stock???
This is not Oreo?
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
Just confirming that it is twrp flashable, ryt?
Will it work on indian z2 plus?
Does it have Vietnamese?
Airtioteclint said:
I flashed solely for the baseband. Attaching screenshot if anybody is interested.
Click to expand...
Click to collapse
Can you tell me the procedure you did to update your baseband. ? Just flashing this and booting the device will update the baseband? After booting up I can again reboot to recovery and flash valdis or screwd ROM which need updated baseband for installing the ROM.. please help?
abhay009 said:
This is not Oreo?
Click to expand...
Click to collapse
nope
Flashing this ROM lock your bootloader.
selvarajrajkanna said:
Flashing this ROM lock your bootloader.
Click to expand...
Click to collapse
One page back it (someone) says it does not.
fallen.kn said:
One Page back it says it does not.
Click to expand...
Click to collapse
Yep, it does. I tried it myself.
selvarajrajkanna said:
Flashing this ROM lock your bootloader.
Click to expand...
Click to collapse
I can confirm if you boot into the rom, it will lock your bootloader. As long as you stay in twrp after flashing then you should have no problems.

How to know that my bootloader is updated or outdated ???

Is the only way to know is getting blue screen while flashing new pie builds.
For latest Pie builds, one needs to have baseband of 1.70 CN, meaning anything over ZUI 3.5 baseband should work fine.
Mind you, since ZUI 3, ZUK Dev's for some wired reason stopped hiking the version information even though they are working and updating the baseband. So it's always stuck on 1.70 as information.
Thanks
NaXal said:
For latest Pie builds, one needs to have baseband of 1.70 CN, meaning anything over ZUI 3.5 baseband should work fine.
Mind you, since ZUI 3, ZUK Dev's for some wired reason stopped hiking the version information even though they are working and updating the baseband. So it's always stuck on 1.70 as information.
Thanks
Click to expand...
Click to collapse
Thanks for replying.
My baseband is 1.70 And the only thing that was on it was the zui 2.5 indian, which I then went to the customs roms. So I can install a 4.4 kernel rom?
Zukker Fs! said:
My baseband is 1.70 And the only thing that was on it was the zui 2.5 indian, which I then went to the customs roms. So I can install a 4.4 kernel rom?
Click to expand...
Click to collapse
Yes you can
Zukker Fs! said:
My baseband is 1.70 And the only thing that was on it was the zui 2.5 indian, which I then went to the customs roms. So I can install a 4.4 kernel rom?
Click to expand...
Click to collapse
Did you tried???
What happened???
Reetesh54 said:
Did you tried???
What happened???
Click to expand...
Click to collapse
I still have not had the courage, so I'm asking if anyone has tried and it works. There are some who say yes but others who do not and I'm in doubt
Zukker Fs! said:
I still have not had the courage, so I'm asking if anyone has tried and it works. There are some who say yes but others who do not and I'm in doubt
Click to expand...
Click to collapse
Kindly let me know if you try.
Reetesh54 said:
Kindly let me know if you try.
Click to expand...
Click to collapse
and @Zukker Fs!
I hope this will clarify doubts..
vbvn said:
Ok .. so I am on aex 6.1 straight from 3.18 kernel treble roms (NO QFIL done ever since I bought this phone). Just an Indian 2.5 ZUI user updated via OTA when I had purchased phone. (default baseband 1.76x)
Note that upon flashing 6.1 ROM and gapps (clean flash including vendor), i clicked 'wipe/cache dalvik' and then 'reboot now' where it stucked! I hard shutdown phone and powered it on again and voila AEX logo appeared and reached to setup screen. So far so good. No issues whatsoever! So can we say that Indian 2.5 ZUI is enough to boot 4.4 kernels, as already reported by many users?? Although I still see none of the devs recommends this, there may be some sensors / component issues by skipping qfil?? we shall see..
Click to expand...
Click to collapse
Friend If your phone has already been installed zui 2.5 indiana (then installed the customs roms) Do not need to upgrade (install the Chinese 3.5 by qpst). The basebands do not come out of 1.70x only have one that is different that is 1.76 (mine is zuk z2 + (131) in it I put the zui 2.5 indiana and then went to the customs roms and now I went to the roms with kernel 4.4 without installing zui 3.5
---------- Post added at 07:50 PM ---------- Previous post was at 07:47 PM ----------
Reetesh54 said:
Kindly let me know if you try.
Click to expand...
Click to collapse
Friend worked here I did not need to install zui 3.5 by qpst. The Indian zui 2.5 who already installed it once and then left it for the customs roms can go to those with 4.4 kernels
---------- Post added at 07:50 PM ---------- Previous post was at 07:50 PM ----------
Reetesh54 said:
Kindly let me know if you try.
Click to expand...
Click to collapse
Friend worked here I did not need to install zui 3.5 by qpst. The Indian zui 2.5 who already installed it once and then left it for the customs roms can go to those with 4.4 kernels
Hello
Can someone point a link to the latest firmware for 4.4 kernels? Thanks
Zukker Fs! said:
I still have not had the courage, so I'm asking if anyone has tried and it works. There are some who say yes but others who do not and I'm in doubt
Click to expand...
Click to collapse
I tried but get bluescreen.
Haider** said:
I tried but get bluescreen.
Click to expand...
Click to collapse
brother maviekran the previous rome after we get back thanks
Z2 Plus cihazımdan Tapatalk kullanılarak gönderildi

Update stock ZUI error

After flashing newest ZUI 3.5 ST with Mi Flash tool, it says „the sytem can not find file specifield.(0x800700...
What to do?
Chack picture
Vukpa said:
After flashing newest ZUI 3.5 ST with Mi Flash tool, it says „the sytem can not find file specifield.(0x800700...
What to do?
Chack picture
Click to expand...
Click to collapse
Try qfil
selvarajrajkanna said:
Try qfil
Click to expand...
Click to collapse
I found YT tutorial with this program, do you know how to use that qps program?

J730f u7 touch problem

Hi guys.
After flashed j730f with binary u7 touch didn't work.
I think if change to j730gm it's work bucz i find j730gm(binary u3)twrp backup and after install that touch work but imei and baseband change to null or 0000
Maybe i change phone to j730gm and touch working?
Flash only CP modem from j730f zip
Open Odin flash only CP and test
I m using latest bootloader my phone is j730g
I m using Custom ROM
My suggest test Custom ROM Android 10
After test CP modem If your signal run
You use other ROM or official
hacker812c said:
Flash only CP modem from j730f zip
Open Odin flash only CP and test
I m using latest bootloader my phone is j730g
I m using Custom ROM
My suggest test Custom ROM Android 10
Click to expand...
Click to collapse
I try it but doesn't work
i will try custom rom
which custom rom is better?
MrSajjad said:
I try it but doesn't work
i will try custom rom
which custom rom is better?
Click to expand...
Click to collapse
I recomend havoc OS or Ressurection Remix 8.6.5
hacker812c said:
I recomend havoc OS or Ressurection Remix 8.6.5
Click to expand...
Click to collapse
do you have j7 pro ?
can you take TWRP backup for me?
MrSajjad said:
do you have j7 pro ?
can you take TWRP backup for me?
Click to expand...
Click to collapse
I have j730g
hacker812c said:
I have j730g
Click to expand...
Click to collapse
if you have TWRP on your device can you take backup for me?
MrSajjad said:
if you have TWRP on your device can you take backup for me?
Click to expand...
Click to collapse
My backup is j730g i recomend you flash Custom ROM
hacker812c said:
My backup is j730g i recomend you flash Custom ROM
Click to expand...
Click to collapse
My customer doesn't like Custom ROM

Categories

Resources